Skip to contentSkip to conversation

Add regulator devfreq support to Panfrost

PATCH Superseded Clément Péron 3 participants 20 messages Jul 9, 2020 – Jul 10, 2020

Subsystems (5)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover Add regulator devfreq support to Panfrost

Hi,

This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.

We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.

First patches [01-07] should not change the actual behavior and introduce a proper panfrost_devfreq struct.

Regards,
Clément

Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fix opp_set_regulator before adding opp_table (introduce in v2)
- Call err_fini in case opp_add_table failed

Changes since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name path
- Drop device_property_test patch
- Add rename error labels patch

Clément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introduce panfrost_devfreq struct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels in device_init drm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always

 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   |   1 +
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 102 ++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/gpu/drm/panfrost/panfrost_devfreq.c   | 175 ++++++++++++------
 drivers/gpu/drm/panfrost/panfrost_devfreq.h   |  30 ++-
 drivers/gpu/drm/panfrost/panfrost_device.c    |  61 +++---
 drivers/gpu/drm/panfrost/panfrost_device.h    |  14 +-
 drivers/gpu/drm/panfrost/panfrost_drv.c       |  15 +-
 drivers/gpu/drm/panfrost/panfrost_job.c       |  10 +-
 9 files changed, 296 insertions(+), 113 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/14 drm/panfrost: avoid static declaration

This declaration can be avoided so change it.

---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 38 ++++++++++-----------
 1 file changed, 18 insertions(+), 20 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +18 -20
index 413987038fbf..1b560b903ea6 100644
@@ -14,7 +14,24 @@
 #include "panfrost_gpu.h"
 #include "panfrost_regs.h"
 
-static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev);
+static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev)
+{
+	ktime_t now;
+	ktime_t last;
+
+	if (!pfdev->devfreq.devfreq)
+		return;
+
+	now = ktime_get();
+	last = pfdev->devfreq.time_last_update;
+
+	if (atomic_read(&pfdev->devfreq.busy_count) > 0)
+		pfdev->devfreq.busy_time += ktime_sub(now, last);
+	else
+		pfdev->devfreq.idle_time += ktime_sub(now, last);
+
+	pfdev->devfreq.time_last_update = now;
+}
 
 static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
 				   u32 flags)
@@ -139,25 +156,6 @@ void panfrost_devfreq_suspend(struct panfrost_device *pfdev)
 	devfreq_suspend_device(pfdev->devfreq.devfreq);
 }
 
-static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev)
-{
-	ktime_t now;
-	ktime_t last;
-
-	if (!pfdev->devfreq.devfreq)
-		return;
-
-	now = ktime_get();
-	last = pfdev->devfreq.time_last_update;
-
-	if (atomic_read(&pfdev->devfreq.busy_count) > 0)
-		pfdev->devfreq.busy_time += ktime_sub(now, last);
-	else
-		pfdev->devfreq.idle_time += ktime_sub(now, last);
-
-	pfdev->devfreq.time_last_update = now;
-}
-
 void panfrost_devfreq_record_busy(struct panfrost_device *pfdev)
 {
 	panfrost_devfreq_update_utilization(pfdev);
Signature · 1 line
2.25.1
#2 lore raw

PATCH v3 2/14 drm/panfrost: clean headers in devfreq

In reply to Clément Péron

Don't include not required headers and sort them.

---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +2 -6
index 1b560b903ea6..df7b71da9a84 100644
@@ -1,18 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright 2019 Collabora ltd. */
+
+#include <linux/clk.h>
 #include <linux/devfreq.h>
 #include <linux/devfreq_cooling.h>
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
-#include <linux/clk.h>
-#include <linux/regulator/consumer.h>
 
 #include "panfrost_device.h"
 #include "panfrost_devfreq.h"
-#include "panfrost_features.h"
-#include "panfrost_issues.h"
-#include "panfrost_gpu.h"
-#include "panfrost_regs.h"
 
 static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev)
 {
Signature · 1 line
2.25.1
#3 lore raw

PATCH v3 3/14 drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle

In reply to Clément Péron

This use devfreq variable that will be lock with spinlock in future patches. We should either introduce a function to access this one but as devfreq is optional let's just remove it.

---
 drivers/gpu/drm/panfrost/panfrost_job.c | 4 ----
 1 file changed, 4 deletions(-)
drivers/gpu/drm/panfrost/panfrost_job.c +0 -4
index 7914b1570841..63e32a9f2749 100644
@@ -581,10 +581,6 @@ int panfrost_job_is_idle(struct panfrost_device *pfdev)
 	struct panfrost_job_slot *js = pfdev->js;
 	int i;
 
-	/* Check whether the hardware is idle */
-	if (atomic_read(&pfdev->devfreq.busy_count))
-		return false;
-
 	for (i = 0; i < NUM_JOB_SLOTS; i++) {
 		/* If there are any jobs in the HW queue, we're not idle */
 		if (atomic_read(&js->queue[i].sched.hw_rq_count))
Signature · 1 line
2.25.1
#4 lore raw

PATCH v3 4/14 drm/panfrost: introduce panfrost_devfreq struct

In reply to Clément Péron

Introduce a proper panfrost_devfreq to deal with devfreq variables.

---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 76 ++++++++++++---------
 drivers/gpu/drm/panfrost/panfrost_devfreq.h | 20 +++++-
 drivers/gpu/drm/panfrost/panfrost_device.h  | 11 +--
 drivers/gpu/drm/panfrost/panfrost_job.c     |  6 +-
 4 files changed, 66 insertions(+), 47 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +42 -34
index df7b71da9a84..962550363391 100644
@@ -10,23 +10,23 @@
 #include "panfrost_device.h"
 #include "panfrost_devfreq.h"
 
-static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev)
+static void panfrost_devfreq_update_utilization(struct panfrost_devfreq *pfdevfreq)
 {
 	ktime_t now;
 	ktime_t last;
 
-	if (!pfdev->devfreq.devfreq)
+	if (!pfdevfreq->devfreq)
 		return;
 
 	now = ktime_get();
-	last = pfdev->devfreq.time_last_update;
+	last = pfdevfreq->time_last_update;
 
-	if (atomic_read(&pfdev->devfreq.busy_count) > 0)
-		pfdev->devfreq.busy_time += ktime_sub(now, last);
+	if (atomic_read(&pfdevfreq->busy_count) > 0)
+		pfdevfreq->busy_time += ktime_sub(now, last);
 	else
-		pfdev->devfreq.idle_time += ktime_sub(now, last);
+		pfdevfreq->idle_time += ktime_sub(now, last);
 
-	pfdev->devfreq.time_last_update = now;
+	pfdevfreq->time_last_update = now;
 }
 
 static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
@@ -47,30 +47,31 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
 	return 0;
 }
 
-static void panfrost_devfreq_reset(struct panfrost_device *pfdev)
+static void panfrost_devfreq_reset(struct panfrost_devfreq *pfdevfreq)
 {
-	pfdev->devfreq.busy_time = 0;
-	pfdev->devfreq.idle_time = 0;
-	pfdev->devfreq.time_last_update = ktime_get();
+	pfdevfreq->busy_time = 0;
+	pfdevfreq->idle_time = 0;
+	pfdevfreq->time_last_update = ktime_get();
 }
 
 static int panfrost_devfreq_get_dev_status(struct device *dev,
 					   struct devfreq_dev_status *status)
 {
 	struct panfrost_device *pfdev = dev_get_drvdata(dev);
+	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
-	panfrost_devfreq_update_utilization(pfdev);
+	panfrost_devfreq_update_utilization(pfdevfreq);
 
 	status->current_frequency = clk_get_rate(pfdev->clock);
-	status->total_time = ktime_to_ns(ktime_add(pfdev->devfreq.busy_time,
-						   pfdev->devfreq.idle_time));
+	status->total_time = ktime_to_ns(ktime_add(pfdevfreq->busy_time,
+						   pfdevfreq->idle_time));
 
-	status->busy_time = ktime_to_ns(pfdev->devfreq.busy_time);
+	status->busy_time = ktime_to_ns(pfdevfreq->busy_time);
 
-	panfrost_devfreq_reset(pfdev);
+	panfrost_devfreq_reset(pfdevfreq);
 
-	dev_dbg(pfdev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n", status->busy_time,
-		status->total_time,
+	dev_dbg(pfdev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n",
+		status->busy_time, status->total_time,
 		status->busy_time / (status->total_time / 100),
 		status->current_frequency / 1000 / 1000);
 
@@ -91,6 +92,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	struct device *dev = &pfdev->pdev->dev;
 	struct devfreq *devfreq;
 	struct thermal_cooling_device *cooling;
+	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
 	ret = dev_pm_opp_of_add_table(dev);
 	if (ret == -ENODEV) /* Optional, continue without devfreq */
@@ -98,7 +100,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	else if (ret)
 		return ret;
 
-	panfrost_devfreq_reset(pfdev);
+	panfrost_devfreq_reset(pfdevfreq);
 
 	cur_freq = clk_get_rate(pfdev->clock);
 
@@ -116,53 +118,59 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 		dev_pm_opp_of_remove_table(dev);
 		return PTR_ERR(devfreq);
 	}
-	pfdev->devfreq.devfreq = devfreq;
+	pfdevfreq->devfreq = devfreq;
 
 	cooling = of_devfreq_cooling_register(dev->of_node, devfreq);
 	if (IS_ERR(cooling))
 		DRM_DEV_INFO(dev, "Failed to register cooling device\n");
 	else
-		pfdev->devfreq.cooling = cooling;
+		pfdevfreq->cooling = cooling;
 
 	return 0;
 }
 
 void panfrost_devfreq_fini(struct panfrost_device *pfdev)
 {
-	if (pfdev->devfreq.cooling)
-		devfreq_cooling_unregister(pfdev->devfreq.cooling);
+	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
+
+	if (pfdevfreq->cooling)
+		devfreq_cooling_unregister(pfdevfreq->cooling);
 	dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
 }
 
 void panfrost_devfreq_resume(struct panfrost_device *pfdev)
 {
-	if (!pfdev->devfreq.devfreq)
+	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
+
+	if (!pfdevfreq->devfreq)
 		return;
 
-	panfrost_devfreq_reset(pfdev);
+	panfrost_devfreq_reset(pfdevfreq);
 
-	devfreq_resume_device(pfdev->devfreq.devfreq);
+	devfreq_resume_device(pfdevfreq->devfreq);
 }
 
 void panfrost_devfreq_suspend(struct panfrost_device *pfdev)
 {
-	if (!pfdev->devfreq.devfreq)
+	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
+
+	if (!pfdevfreq->devfreq)
 		return;
 
-	devfreq_suspend_device(pfdev->devfreq.devfreq);
+	devfreq_suspend_device(pfdevfreq->devfreq);
 }
 
-void panfrost_devfreq_record_busy(struct panfrost_device *pfdev)
+void panfrost_devfreq_record_busy(struct panfrost_devfreq *pfdevfreq)
 {
-	panfrost_devfreq_update_utilization(pfdev);
-	atomic_inc(&pfdev->devfreq.busy_count);
+	panfrost_devfreq_update_utilization(pfdevfreq);
+	atomic_inc(&pfdevfreq->busy_count);
 }
 
-void panfrost_devfreq_record_idle(struct panfrost_device *pfdev)
+void panfrost_devfreq_record_idle(struct panfrost_devfreq *pfdevfreq)
 {
 	int count;
 
-	panfrost_devfreq_update_utilization(pfdev);
-	count = atomic_dec_if_positive(&pfdev->devfreq.busy_count);
+	panfrost_devfreq_update_utilization(pfdevfreq);
+	count = atomic_dec_if_positive(&pfdevfreq->busy_count);
 	WARN_ON(count < 0);
 }
drivers/gpu/drm/panfrost/panfrost_devfreq.h +18 -2
index 0611beffc8d0..0697f8d5aa34 100644
@@ -4,13 +4,29 @@
 #ifndef __PANFROST_DEVFREQ_H__
 #define __PANFROST_DEVFREQ_H__
 
+#include <linux/ktime.h>
+
+struct devfreq;
+struct thermal_cooling_device;
+
+struct panfrost_device;
+
+struct panfrost_devfreq {
+	struct devfreq *devfreq;
+	struct thermal_cooling_device *cooling;
+	ktime_t busy_time;
+	ktime_t idle_time;
+	ktime_t time_last_update;
+	atomic_t busy_count;
+};
+
 int panfrost_devfreq_init(struct panfrost_device *pfdev);
 void panfrost_devfreq_fini(struct panfrost_device *pfdev);
 
 void panfrost_devfreq_resume(struct panfrost_device *pfdev);
 void panfrost_devfreq_suspend(struct panfrost_device *pfdev);
 
-void panfrost_devfreq_record_busy(struct panfrost_device *pfdev);
-void panfrost_devfreq_record_idle(struct panfrost_device *pfdev);
+void panfrost_devfreq_record_busy(struct panfrost_devfreq *devfreq);
+void panfrost_devfreq_record_idle(struct panfrost_devfreq *devfreq);
 
 #endif /* __PANFROST_DEVFREQ_H__ */
drivers/gpu/drm/panfrost/panfrost_device.h +3 -8
index c30c719a8059..2efa59c9d1c5 100644
@@ -13,6 +13,8 @@
 #include <drm/drm_mm.h>
 #include <drm/gpu_scheduler.h>
 
+#include "panfrost_devfreq.h"
+
 struct panfrost_device;
 struct panfrost_mmu;
 struct panfrost_job_slot;
@@ -107,14 +109,7 @@ struct panfrost_device {
 	struct list_head shrinker_list;
 	struct shrinker shrinker;
 
-	struct {
-		struct devfreq *devfreq;
-		struct thermal_cooling_device *cooling;
-		ktime_t busy_time;
-		ktime_t idle_time;
-		ktime_t time_last_update;
-		atomic_t busy_count;
-	} devfreq;
+	struct panfrost_devfreq pfdevfreq;
 };
 
 struct panfrost_mmu {
drivers/gpu/drm/panfrost/panfrost_job.c +3 -3
index 63e32a9f2749..a67f3eac6a58 100644
@@ -155,7 +155,7 @@ static void panfrost_job_hw_submit(struct panfrost_job *job, int js)
 	}
 
 	cfg = panfrost_mmu_as_get(pfdev, &job->file_priv->mmu);
-	panfrost_devfreq_record_busy(pfdev);
+	panfrost_devfreq_record_busy(&pfdev->pfdevfreq);
 
 	job_write(pfdev, JS_HEAD_NEXT_LO(js), jc_head & 0xFFFFFFFF);
 	job_write(pfdev, JS_HEAD_NEXT_HI(js), jc_head >> 32);
@@ -415,7 +415,7 @@ static void panfrost_job_timedout(struct drm_sched_job *sched_job)
 	}
 	spin_unlock_irqrestore(&pfdev->js->job_lock, flags);
 
-	panfrost_devfreq_record_idle(pfdev);
+	panfrost_devfreq_record_idle(&pfdev->pfdevfreq);
 	panfrost_device_reset(pfdev);
 
 	for (i = 0; i < NUM_JOB_SLOTS; i++)
@@ -478,7 +478,7 @@ static irqreturn_t panfrost_job_irq_handler(int irq, void *data)
 				pfdev->jobs[j] = NULL;
 
 				panfrost_mmu_as_put(pfdev, &job->file_priv->mmu);
-				panfrost_devfreq_record_idle(pfdev);
+				panfrost_devfreq_record_idle(&pfdev->pfdevfreq);
 
 				dma_fence_signal_locked(job->done_fence);
 				pm_runtime_put_autosuspend(pfdev->dev);
Signature · 1 line
2.25.1
#5 lore raw

PATCH v3 5/14 drm/panfrost: use spinlock instead of atomic

In reply to Clément Péron

Convert busy_count to a simple int protected by spinlock.

---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 43 +++++++++++++++------
 drivers/gpu/drm/panfrost/panfrost_devfreq.h |  9 ++++-
 2 files changed, 40 insertions(+), 12 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +32 -11
index 962550363391..78753cfb59fb 100644
@@ -12,16 +12,12 @@
 
 static void panfrost_devfreq_update_utilization(struct panfrost_devfreq *pfdevfreq)
 {
-	ktime_t now;
-	ktime_t last;
-
-	if (!pfdevfreq->devfreq)
-		return;
+	ktime_t now, last;
 
 	now = ktime_get();
 	last = pfdevfreq->time_last_update;
 
-	if (atomic_read(&pfdevfreq->busy_count) > 0)
+	if (pfdevfreq->busy_count > 0)
 		pfdevfreq->busy_time += ktime_sub(now, last);
 	else
 		pfdevfreq->idle_time += ktime_sub(now, last);
@@ -59,10 +55,14 @@ static int panfrost_devfreq_get_dev_status(struct device *dev,
 {
 	struct panfrost_device *pfdev = dev_get_drvdata(dev);
 	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
+	unsigned long irqflags;
+
+	status->current_frequency = clk_get_rate(pfdev->clock);
+
+	spin_lock_irqsave(&pfdevfreq->lock, irqflags);
 
 	panfrost_devfreq_update_utilization(pfdevfreq);
 
-	status->current_frequency = clk_get_rate(pfdev->clock);
 	status->total_time = ktime_to_ns(ktime_add(pfdevfreq->busy_time,
 						   pfdevfreq->idle_time));
 
@@ -70,6 +70,8 @@ static int panfrost_devfreq_get_dev_status(struct device *dev,
 
 	panfrost_devfreq_reset(pfdevfreq);
 
+	spin_unlock_irqrestore(&pfdevfreq->lock, irqflags);
+
 	dev_dbg(pfdev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n",
 		status->busy_time, status->total_time,
 		status->busy_time / (status->total_time / 100),
@@ -100,6 +102,8 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	else if (ret)
 		return ret;
 
+	spin_lock_init(&pfdevfreq->lock);
+
 	panfrost_devfreq_reset(pfdevfreq);
 
 	cur_freq = clk_get_rate(pfdev->clock);
@@ -162,15 +166,32 @@ void panfrost_devfreq_suspend(struct panfrost_device *pfdev)
 
 void panfrost_devfreq_record_busy(struct panfrost_devfreq *pfdevfreq)
 {
+	unsigned long irqflags;
+
+	if (!pfdevfreq->devfreq)
+		return;
+
+	spin_lock_irqsave(&pfdevfreq->lock, irqflags);
+
 	panfrost_devfreq_update_utilization(pfdevfreq);
-	atomic_inc(&pfdevfreq->busy_count);
+
+	pfdevfreq->busy_count++;
+
+	spin_unlock_irqrestore(&pfdevfreq->lock, irqflags);
 }
 
 void panfrost_devfreq_record_idle(struct panfrost_devfreq *pfdevfreq)
 {
-	int count;
+	unsigned long irqflags;
+
+	if (!pfdevfreq->devfreq)
+		return;
+
+	spin_lock_irqsave(&pfdevfreq->lock, irqflags);
 
 	panfrost_devfreq_update_utilization(pfdevfreq);
-	count = atomic_dec_if_positive(&pfdevfreq->busy_count);
-	WARN_ON(count < 0);
+
+	WARN_ON(--pfdevfreq->busy_count < 0);
+
+	spin_unlock_irqrestore(&pfdevfreq->lock, irqflags);
 }
drivers/gpu/drm/panfrost/panfrost_devfreq.h +8 -1
index 0697f8d5aa34..3392df1020be 100644
@@ -4,6 +4,7 @@
 #ifndef __PANFROST_DEVFREQ_H__
 #define __PANFROST_DEVFREQ_H__
 
+#include <linux/spinlock.h>
 #include <linux/ktime.h>
 
 struct devfreq;
@@ -14,10 +15,16 @@ struct panfrost_device;
 struct panfrost_devfreq {
 	struct devfreq *devfreq;
 	struct thermal_cooling_device *cooling;
+
 	ktime_t busy_time;
 	ktime_t idle_time;
 	ktime_t time_last_update;
-	atomic_t busy_count;
+	int busy_count;
+	/*
+	 * Protect busy_time, idle_time, time_last_update and busy_count
+	 * because these can be updated concurrently between multiple jobs.
+	 */
+	spinlock_t lock;
 };
 
 int panfrost_devfreq_init(struct panfrost_device *pfdev);
Signature · 1 line
2.25.1
#6 lore raw

PATCH v3 6/14 drm/panfrost: properly handle error in probe

In reply to Clément Péron

Introduce a boolean to know if opp table has been added.

With this, we can call panfrost_devfreq_fini() in case of error and release what has been initialised.

---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 25 ++++++++++++++++-----
 drivers/gpu/drm/panfrost/panfrost_devfreq.h |  1 +
 2 files changed, 20 insertions(+), 6 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +19 -6
index 78753cfb59fb..d9007f44b772 100644
@@ -101,6 +101,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 		return 0;
 	else if (ret)
 		return ret;
+	pfdevfreq->opp_of_table_added = true;
 
 	spin_lock_init(&pfdevfreq->lock);
 
@@ -109,8 +110,10 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	cur_freq = clk_get_rate(pfdev->clock);
 
 	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
-	if (IS_ERR(opp))
-		return PTR_ERR(opp);
+	if (IS_ERR(opp)) {
+		ret = PTR_ERR(opp);
+		goto err_fini;
+	}
 
 	panfrost_devfreq_profile.initial_freq = cur_freq;
 	dev_pm_opp_put(opp);
@@ -119,8 +122,8 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 					  DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
 	if (IS_ERR(devfreq)) {
 		DRM_DEV_ERROR(dev, "Couldn't initialize GPU devfreq\n");
-		dev_pm_opp_of_remove_table(dev);
-		return PTR_ERR(devfreq);
+		ret = PTR_ERR(devfreq);
+		goto err_fini;
 	}
 	pfdevfreq->devfreq = devfreq;
 
@@ -131,15 +134,25 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 		pfdevfreq->cooling = cooling;
 
 	return 0;
+
+err_fini:
+	panfrost_devfreq_fini(pfdev);
+	return ret;
 }
 
 void panfrost_devfreq_fini(struct panfrost_device *pfdev)
 {
 	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
-	if (pfdevfreq->cooling)
+	if (pfdevfreq->cooling) {
 		devfreq_cooling_unregister(pfdevfreq->cooling);
-	dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
+		pfdevfreq->cooling = NULL;
+	}
+
+	if (pfdevfreq->opp_of_table_added) {
+		dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
+		pfdevfreq->opp_of_table_added = false;
+	}
 }
 
 void panfrost_devfreq_resume(struct panfrost_device *pfdev)
drivers/gpu/drm/panfrost/panfrost_devfreq.h +1 -0
index 3392df1020be..210269944687 100644
@@ -15,6 +15,7 @@ struct panfrost_device;
 struct panfrost_devfreq {
 	struct devfreq *devfreq;
 	struct thermal_cooling_device *cooling;
+	bool opp_of_table_added;
 
 	ktime_t busy_time;
 	ktime_t idle_time;
Signature · 1 line
2.25.1
#7 lore raw

PATCH v3 7/14 drm/panfrost: rename error labels in device_init

In reply to Clément Péron

Rename goto labels in device_init it will be easier to maintain.

---
 drivers/gpu/drm/panfrost/panfrost_device.c | 30 +++++++++++-----------
 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +15 -15
index 8136babd3ba9..cc16d102b275 100644
@@ -215,57 +215,57 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 	err = panfrost_regulator_init(pfdev);
 	if (err) {
 		dev_err(pfdev->dev, "regulator init failed %d\n", err);
-		goto err_out0;
+		goto out_clk;
 	}
 
 	err = panfrost_reset_init(pfdev);
 	if (err) {
 		dev_err(pfdev->dev, "reset init failed %d\n", err);
-		goto err_out1;
+		goto out_regulator;
 	}
 
 	err = panfrost_pm_domain_init(pfdev);
 	if (err)
-		goto err_out2;
+		goto out_reset;
 
 	res = platform_get_resource(pfdev->pdev, IORESOURCE_MEM, 0);
 	pfdev->iomem = devm_ioremap_resource(pfdev->dev, res);
 	if (IS_ERR(pfdev->iomem)) {
 		dev_err(pfdev->dev, "failed to ioremap iomem\n");
 		err = PTR_ERR(pfdev->iomem);
-		goto err_out3;
+		goto out_pm_domain;
 	}
 
 	err = panfrost_gpu_init(pfdev);
 	if (err)
-		goto err_out3;
+		goto out_pm_domain;
 
 	err = panfrost_mmu_init(pfdev);
 	if (err)
-		goto err_out4;
+		goto out_gpu;
 
 	err = panfrost_job_init(pfdev);
 	if (err)
-		goto err_out5;
+		goto out_mmu;
 
 	err = panfrost_perfcnt_init(pfdev);
 	if (err)
-		goto err_out6;
+		goto out_job;
 
 	return 0;
-err_out6:
+out_job:
 	panfrost_job_fini(pfdev);
-err_out5:
+out_mmu:
 	panfrost_mmu_fini(pfdev);
-err_out4:
+out_gpu:
 	panfrost_gpu_fini(pfdev);
-err_out3:
+out_pm_domain:
 	panfrost_pm_domain_fini(pfdev);
-err_out2:
+out_reset:
 	panfrost_reset_fini(pfdev);
-err_out1:
+out_regulator:
 	panfrost_regulator_fini(pfdev);
-err_out0:
+out_clk:
 	panfrost_clk_fini(pfdev);
 	return err;
 }
Signature · 1 line
2.25.1
maintainer Reviewed-by on v3 7/14
#8 lore raw

Re: [PATCH v3 07/14] drm/panfrost: rename error labels in device_init

Quoted 4 lines · Clément Péron

Rename goto labels in device_init it will be easier to maintain.

Nice clean up, thanks. As you noted this needs rebasing as the "regulator init" message has gone.

Quoted 72 lines
---
  drivers/gpu/drm/panfrost/panfrost_device.c | 30 +++++++++++-----------
  1 file changed, 15 insertions(+), 15 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +12 -13
index 8136babd3ba9..cc16d102b275 100644
@@ -215,57 +215,57 @@ int panfrost_device_init(struct panfrost_device *pfdev)
  	err = panfrost_regulator_init(pfdev);
  	if (err) {
  		dev_err(pfdev->dev, "regulator init failed %d\n", err);
-		goto err_out0;
+		goto out_clk;
  	}
 
  	err = panfrost_reset_init(pfdev);
  	if (err) {
  		dev_err(pfdev->dev, "reset init failed %d\n", err);
-		goto err_out1;
+		goto out_regulator;
  	}
 
  	err = panfrost_pm_domain_init(pfdev);
  	if (err)
-		goto err_out2;
+		goto out_reset;
 
  	res = platform_get_resource(pfdev->pdev, IORESOURCE_MEM, 0);
  	pfdev->iomem = devm_ioremap_resource(pfdev->dev, res);
  	if (IS_ERR(pfdev->iomem)) {
  		dev_err(pfdev->dev, "failed to ioremap iomem\n");
  		err = PTR_ERR(pfdev->iomem);
-		goto err_out3;
+		goto out_pm_domain;
  	}
 
  	err = panfrost_gpu_init(pfdev);
  	if (err)
-		goto err_out3;
+		goto out_pm_domain;
 
  	err = panfrost_mmu_init(pfdev);
  	if (err)
-		goto err_out4;
+		goto out_gpu;
 
  	err = panfrost_job_init(pfdev);
  	if (err)
-		goto err_out5;
+		goto out_mmu;
 
  	err = panfrost_perfcnt_init(pfdev);
  	if (err)
-		goto err_out6;
+		goto out_job;
 
  	return 0;
-err_out6:
+out_job:
  	panfrost_job_fini(pfdev);
-err_out5:
+out_mmu:
  	panfrost_mmu_fini(pfdev);
-err_out4:
+out_gpu:
  	panfrost_gpu_fini(pfdev);
-err_out3:
+out_pm_domain:
  	panfrost_pm_domain_fini(pfdev);
-err_out2:

drivers/gpu/drm/panfrost/panfrost_device.c int panfrost_device_init(struct panfrost_device *pfdev) · line 271

Quoted 10 lines
drivers/gpu/drm/panfrost/panfrost_device.c +3 -2
+out_reset:
  	panfrost_reset_fini(pfdev);
-err_out1:
+out_regulator:
  	panfrost_regulator_fini(pfdev);
-err_out0:
+out_clk:
  	panfrost_clk_fini(pfdev);
  	return err;
  }

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#9 lore raw

PATCH v3 8/14 drm/panfrost: move devfreq_init()/fini() in device

In reply to Clément Péron

Later we will introduce devfreq probing regulator if they are present. As regulator should be probe only one time we need to get this logic in the device_init().

panfrost_device is already taking care of devfreq_resume() and devfreq_suspend(), so it's not totally illogic to move the devfreq_init() and devfreq_fini() here.

---
 drivers/gpu/drm/panfrost/panfrost_device.c | 12 +++++++++++-
 drivers/gpu/drm/panfrost/panfrost_drv.c    | 15 ++-------------
 2 files changed, 13 insertions(+), 14 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +11 -1
index cc16d102b275..464da1646398 100644
@@ -212,10 +212,17 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 		return err;
 	}
 
+	err = panfrost_devfreq_init(pfdev);
+	if (err) {
+		if (err != -EPROBE_DEFER)
+			dev_err(pfdev->dev, "devfreq init failed %d\n", err);
+		goto out_clk;
+	}
+
 	err = panfrost_regulator_init(pfdev);
 	if (err) {
 		dev_err(pfdev->dev, "regulator init failed %d\n", err);
-		goto out_clk;
+		goto out_devfreq;
 	}
 
 	err = panfrost_reset_init(pfdev);
@@ -265,6 +272,8 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 	panfrost_reset_fini(pfdev);
 out_regulator:
 	panfrost_regulator_fini(pfdev);
+out_devfreq:
+	panfrost_devfreq_fini(pfdev);
 out_clk:
 	panfrost_clk_fini(pfdev);
 	return err;
@@ -278,6 +287,7 @@ void panfrost_device_fini(struct panfrost_device *pfdev)
 	panfrost_gpu_fini(pfdev);
 	panfrost_pm_domain_fini(pfdev);
 	panfrost_reset_fini(pfdev);
+	panfrost_devfreq_fini(pfdev);
 	panfrost_regulator_fini(pfdev);
 	panfrost_clk_fini(pfdev);
 }
drivers/gpu/drm/panfrost/panfrost_drv.c +2 -13
index 882fecc33fdb..4dda68689015 100644
@@ -14,7 +14,6 @@
 #include <drm/drm_utils.h>
 
 #include "panfrost_device.h"
-#include "panfrost_devfreq.h"
 #include "panfrost_gem.h"
 #include "panfrost_mmu.h"
 #include "panfrost_job.h"
@@ -606,13 +605,6 @@ static int panfrost_probe(struct platform_device *pdev)
 		goto err_out0;
 	}
 
-	err = panfrost_devfreq_init(pfdev);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Fatal error during devfreq init\n");
-		goto err_out1;
-	}
-
 	pm_runtime_set_active(pfdev->dev);
 	pm_runtime_mark_last_busy(pfdev->dev);
 	pm_runtime_enable(pfdev->dev);
@@ -625,16 +617,14 @@ static int panfrost_probe(struct platform_device *pdev)
 	 */
 	err = drm_dev_register(ddev, 0);
 	if (err < 0)
-		goto err_out2;
+		goto err_out1;
 
 	panfrost_gem_shrinker_init(ddev);
 
 	return 0;
 
-err_out2:
-	pm_runtime_disable(pfdev->dev);
-	panfrost_devfreq_fini(pfdev);
 err_out1:
+	pm_runtime_disable(pfdev->dev);
 	panfrost_device_fini(pfdev);
 err_out0:
 	drm_dev_put(ddev);
@@ -650,7 +640,6 @@ static int panfrost_remove(struct platform_device *pdev)
 	panfrost_gem_shrinker_cleanup(ddev);
 
 	pm_runtime_get_sync(pfdev->dev);
-	panfrost_devfreq_fini(pfdev);
 	panfrost_device_fini(pfdev);
 	pm_runtime_put_sync_suspend(pfdev->dev);
 	pm_runtime_disable(pfdev->dev);
Signature · 1 line
2.25.1
maintainer Reviewed-by on v3 8/14
#10 lore raw

Re: [PATCH v3 08/14] drm/panfrost: move devfreq_init()/fini() in device

Quoted 10 lines · Clément Péron

Later we will introduce devfreq probing regulator if they are present. As regulator should be probe only one time we need to get this logic in the device_init().

panfrost_device is already taking care of devfreq_resume() and devfreq_suspend(), so it's not totally illogic to move the devfreq_init() and devfreq_fini() here.

Quoted 92 lines
---
  drivers/gpu/drm/panfrost/panfrost_device.c | 12 +++++++++++-
  drivers/gpu/drm/panfrost/panfrost_drv.c    | 15 ++-------------
  2 files changed, 13 insertions(+), 14 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +11 -1
index cc16d102b275..464da1646398 100644
@@ -212,10 +212,17 @@ int panfrost_device_init(struct panfrost_device *pfdev)
  		return err;
  	}
 
+	err = panfrost_devfreq_init(pfdev);
+	if (err) {
+		if (err != -EPROBE_DEFER)
+			dev_err(pfdev->dev, "devfreq init failed %d\n", err);
+		goto out_clk;
+	}
+
  	err = panfrost_regulator_init(pfdev);
  	if (err) {
  		dev_err(pfdev->dev, "regulator init failed %d\n", err);
-		goto out_clk;
+		goto out_devfreq;
  	}
 
  	err = panfrost_reset_init(pfdev);
@@ -265,6 +272,8 @@ int panfrost_device_init(struct panfrost_device *pfdev)
  	panfrost_reset_fini(pfdev);
  out_regulator:
  	panfrost_regulator_fini(pfdev);
+out_devfreq:
+	panfrost_devfreq_fini(pfdev);
  out_clk:
  	panfrost_clk_fini(pfdev);
  	return err;
@@ -278,6 +287,7 @@ void panfrost_device_fini(struct panfrost_device *pfdev)
  	panfrost_gpu_fini(pfdev);
  	panfrost_pm_domain_fini(pfdev);
  	panfrost_reset_fini(pfdev);
+	panfrost_devfreq_fini(pfdev);
  	panfrost_regulator_fini(pfdev);
  	panfrost_clk_fini(pfdev);
  }
drivers/gpu/drm/panfrost/panfrost_drv.c +2 -12
index 882fecc33fdb..4dda68689015 100644
@@ -14,7 +14,6 @@
  #include <drm/drm_utils.h>
 
  #include "panfrost_device.h"
-#include "panfrost_devfreq.h"
  #include "panfrost_gem.h"
  #include "panfrost_mmu.h"
  #include "panfrost_job.h"
@@ -606,13 +605,6 @@ static int panfrost_probe(struct platform_device *pdev)
  		goto err_out0;
  	}
 
-	err = panfrost_devfreq_init(pfdev);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Fatal error during devfreq init\n");
-		goto err_out1;
-	}
-
  	pm_runtime_set_active(pfdev->dev);
  	pm_runtime_mark_last_busy(pfdev->dev);
  	pm_runtime_enable(pfdev->dev);
@@ -625,16 +617,14 @@ static int panfrost_probe(struct platform_device *pdev)
  	 */
  	err = drm_dev_register(ddev, 0);
  	if (err < 0)
-		goto err_out2;
+		goto err_out1;
 
  	panfrost_gem_shrinker_init(ddev);
 
  	return 0;
 
-err_out2:
-	pm_runtime_disable(pfdev->dev);
-	panfrost_devfreq_fini(pfdev);
  err_out1:
+	pm_runtime_disable(pfdev->dev);
  	panfrost_device_fini(pfdev);
  err_out0:
  	drm_dev_put(ddev);

drivers/gpu/drm/panfrost/panfrost_drv.c static int panfrost_remove(struct platform_device *pdev) · line 645

Quoted 7 lines
drivers/gpu/drm/panfrost/panfrost_drv.c +0 -1
@@ -650,7 +640,6 @@ static int panfrost_remove(struct platform_device *pdev)
  	panfrost_gem_shrinker_cleanup(ddev);
 
  	pm_runtime_get_sync(pfdev->dev);
-	panfrost_devfreq_fini(pfdev);
  	panfrost_device_fini(pfdev);
  	pm_runtime_put_sync_suspend(pfdev->dev);
  	pm_runtime_disable(pfdev->dev);

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#11 lore raw

PATCH v3 9/14 drm/panfrost: dynamically alloc regulators

In reply to Clément Péron

We will later introduce regulators managed by OPP.

Only alloc regulators when it's needed. This also help use to release the regulators only when they are allocated.

---
 drivers/gpu/drm/panfrost/panfrost_device.c | 14 +++++++++-----
 drivers/gpu/drm/panfrost/panfrost_device.h |  3 +--
 2 files changed, 10 insertions(+), 7 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +9 -5
index 464da1646398..0b0fb45aee82 100644
@@ -90,9 +90,11 @@ static int panfrost_regulator_init(struct panfrost_device *pfdev)
 {
 	int ret, i;
 
-	if (WARN(pfdev->comp->num_supplies > ARRAY_SIZE(pfdev->regulators),
-			"Too many supplies in compatible structure.\n"))
-		return -EINVAL;
+	pfdev->regulators = devm_kcalloc(pfdev->dev, pfdev->comp->num_supplies,
+					 sizeof(*pfdev->regulators),
+					 GFP_KERNEL);
+	if (!pfdev->regulators)
+		return -ENOMEM;
 
 	for (i = 0; i < pfdev->comp->num_supplies; i++)
 		pfdev->regulators[i].supply = pfdev->comp->supply_names[i];
@@ -117,8 +119,10 @@ static int panfrost_regulator_init(struct panfrost_device *pfdev)
 
 static void panfrost_regulator_fini(struct panfrost_device *pfdev)
 {
-	regulator_bulk_disable(pfdev->comp->num_supplies,
-			pfdev->regulators);
+	if (!pfdev->regulators)
+		return;
+
+	regulator_bulk_disable(pfdev->comp->num_supplies, pfdev->regulators);
 }
 
 static void panfrost_pm_domain_fini(struct panfrost_device *pfdev)
drivers/gpu/drm/panfrost/panfrost_device.h +1 -2
index 2efa59c9d1c5..953f7536a773 100644
@@ -22,7 +22,6 @@ struct panfrost_job;
 struct panfrost_perfcnt;
 
 #define NUM_JOB_SLOTS 3
-#define MAX_REGULATORS 2
 #define MAX_PM_DOMAINS 3
 
 struct panfrost_features {
@@ -81,7 +80,7 @@ struct panfrost_device {
 	void __iomem *iomem;
 	struct clk *clock;
 	struct clk *bus_clock;
-	struct regulator_bulk_data regulators[MAX_REGULATORS];
+	struct regulator_bulk_data *regulators;
 	struct reset_control *rstc;
 	/* pm_domains for devices with more than one. */
 	struct device *pm_domain_devs[MAX_PM_DOMAINS];
Signature · 1 line
2.25.1
#12 lore raw

PATCH v3 10/14 drm/panfrost: add regulators to devfreq

In reply to Clément Péron

Some OPP tables specify voltage for each frequency. Devfreq can handle these regulators but they should be get only 1 time to avoid issue and know who is in charge.

If OPP table is probe don't init regulator.

---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 29 ++++++++++++++++++---
 drivers/gpu/drm/panfrost/panfrost_devfreq.h |  2 ++
 drivers/gpu/drm/panfrost/panfrost_device.c  | 11 +++++---
 3 files changed, 34 insertions(+), 8 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +25 -4
index d9007f44b772..8ab025d0035f 100644
@@ -93,14 +93,30 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	unsigned long cur_freq;
 	struct device *dev = &pfdev->pdev->dev;
 	struct devfreq *devfreq;
+	struct opp_table *opp_table;
 	struct thermal_cooling_device *cooling;
 	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
+	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
+					      pfdev->comp->num_supplies);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		/* Continue if the optional regulator is missing */
+		if (ret != -ENODEV) {
+			DRM_DEV_ERROR(dev, "Couldn't set OPP regulators\n");
+			goto err_fini;
+		}
+	} else {
+		pfdevfreq->regulators_opp_table = opp_table;
+	}
+
 	ret = dev_pm_opp_of_add_table(dev);
-	if (ret == -ENODEV) /* Optional, continue without devfreq */
-		return 0;
-	else if (ret)
-		return ret;
+	if (ret) {
+		/* Optional, continue without devfreq */
+		if (ret == -ENODEV)
+			ret = 0;
+		goto err_fini;
+	}
 	pfdevfreq->opp_of_table_added = true;
 
 	spin_lock_init(&pfdevfreq->lock);
@@ -153,6 +169,11 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
 		dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
 		pfdevfreq->opp_of_table_added = false;
 	}
+
+	if (pfdevfreq->regulators_opp_table) {
+		dev_pm_opp_put_regulators(pfdevfreq->regulators_opp_table);
+		pfdevfreq->regulators_opp_table = NULL;
+	}
 }
 
 void panfrost_devfreq_resume(struct panfrost_device *pfdev)
drivers/gpu/drm/panfrost/panfrost_devfreq.h +2 -0
index 210269944687..db6ea48e21f9 100644
@@ -8,12 +8,14 @@
 #include <linux/ktime.h>
 
 struct devfreq;
+struct opp_table;
 struct thermal_cooling_device;
 
 struct panfrost_device;
 
 struct panfrost_devfreq {
 	struct devfreq *devfreq;
+	struct opp_table *regulators_opp_table;
 	struct thermal_cooling_device *cooling;
 	bool opp_of_table_added;
 
drivers/gpu/drm/panfrost/panfrost_device.c +7 -4
index 0b0fb45aee82..1b5fc9221828 100644
@@ -223,10 +223,13 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 		goto out_clk;
 	}
 
-	err = panfrost_regulator_init(pfdev);
-	if (err) {
-		dev_err(pfdev->dev, "regulator init failed %d\n", err);
-		goto out_devfreq;
+	/* OPP will handle regulators */
+	if (!pfdev->pfdevfreq.opp_of_table_added) {
+		err = panfrost_regulator_init(pfdev);
+		if (err) {
+			dev_err(pfdev->dev, "regulator init failed %d\n", err);
+			goto out_devfreq;
+		}
 	}
 
 	err = panfrost_reset_init(pfdev);
Signature · 1 line
2.25.1
#13 lore raw

PATCH v3 11/14 arm64: defconfig: Enable devfreq cooling device

In reply to Clément Péron

Devfreq cooling device framework is used in Panfrost to throttle GPU in order to regulate its temperature.

Enable this driver for ARM64 SoC.

---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index 883e8bace3ed..1b7f9ffdc314 100644
@@ -501,6 +501,7 @@ CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_QORIQ_THERMAL=m
 CONFIG_SUN8I_THERMAL=y
Signature · 1 line
2.25.1
#14 lore raw

PATCH v3 12/14 arm64: dts: allwinner: h6: Add cooling map for GPU

In reply to Clément Péron

Add a simple cooling map for the GPU.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 22 ++++++++++++++++++++
 1 file changed, 22 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +22 -0
index 78b1361dfbb9..8f514a2169aa 100644
@@ -174,6 +174,7 @@ gpu: gpu@1800000 {
 			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
 			clock-names = "core", "bus";
 			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
 			status = "disabled";
 		};
 
@@ -1012,6 +1013,27 @@ gpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu_alert: gpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
Signature · 1 line
2.25.1
#15 lore raw

PATCH v3 13/14 arm64: dts: allwinner: h6: Add GPU OPP table

In reply to Clément Péron

Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6.

The voltage range is set with minival voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 80 ++++++++++++++++++++
 1 file changed, 80 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +80 -0
index 8f514a2169aa..a69f9e09a829 100644
@@ -174,6 +174,7 @@ gpu: gpu@1800000 {
 			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
 			clock-names = "core", "bus";
 			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
 			#cooling-cells = <2>;
 			status = "disabled";
 		};
@@ -1036,4 +1037,83 @@ map0 {
 			};
 		};
 	};
+
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp@216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@336000000 {
+			opp-hz = /bits/ 64 <336000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@360000000 {
+			opp-hz = /bits/ 64 <360000000>;
+			opp-microvolt = <820000 820000 1200000>;
+		};
+
+		opp@384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <830000 830000 1200000>;
+		};
+
+		opp@408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <840000 840000 1200000>;
+		};
+
+		opp@420000000 {
+			opp-hz = /bits/ 64 <420000000>;
+			opp-microvolt = <850000 850000 1200000>;
+		};
+
+		opp@432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+			opp-microvolt = <860000 860000 1200000>;
+		};
+
+		opp@456000000 {
+			opp-hz = /bits/ 64 <456000000>;
+			opp-microvolt = <870000 870000 1200000>;
+		};
+
+		opp@504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <890000 890000 1200000>;
+		};
+
+		opp@540000000 {
+			opp-hz = /bits/ 64 <540000000>;
+			opp-microvolt = <910000 910000 1200000>;
+		};
+
+		opp@576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-microvolt = <930000 930000 1200000>;
+		};
+
+		opp@624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <950000 950000 1200000>;
+		};
+
+		opp@756000000 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-microvolt = <1040000 1040000 1200000>;
+		};
+	};
 };
Signature · 1 line
2.25.1
#16 lore raw

Re: [PATCH v3 13/14] [DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table

Quoted 102 lines

Wiadomość napisana przez Clément Péron <[email protected]> w dniu 09.07.2020, o godz. 16:03:

Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6.

The voltage range is set with minival voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator.

---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 80 ++++++++++++++++++++

1 file changed, 80 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +71 -0
index 8f514a2169aa..a69f9e09a829 100644
@@ -174,6 +174,7 @@ gpu: gpu@1800000 {
 			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
 			clock-names = "core", "bus";
 			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
 			#cooling-cells = <2>;
 			status = "disabled";
 		};
@@ -1036,4 +1037,83 @@ map0 {
 			};
 		};
 	};
+
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp@216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@336000000 {
+			opp-hz = /bits/ 64 <336000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp@360000000 {
+			opp-hz = /bits/ 64 <360000000>;
+			opp-microvolt = <820000 820000 1200000>;
+		};
+
+		opp@384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <830000 830000 1200000>;
+		};
+
+		opp@408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <840000 840000 1200000>;
+		};
+
+		opp@420000000 {
+			opp-hz = /bits/ 64 <420000000>;
+			opp-microvolt = <850000 850000 1200000>;
+		};
+
+		opp@432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+			opp-microvolt = <860000 860000 1200000>;
+		};
+
+		opp@456000000 {
+			opp-hz = /bits/ 64 <456000000>;
+			opp-microvolt = <870000 870000 1200000>;
+		};
+
+		opp@504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <890000 890000 1200000>;
+		};
+
+		opp@540000000 {
+			opp-hz = /bits/ 64 <540000000>;
+			opp-microvolt = <910000 910000 1200000>;
+		};
+
+		opp@576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-microvolt = <930000 930000 1200000>;
+		};
+
+		opp@624000000 {

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi map0 { · line 1119

Quoted 10 lines
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +9 -0
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <950000 950000 1200000>;
+		};
+
+		opp@756000000 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-microvolt = <1040000 1040000 1200000>;
+		};
+	};
 };

Clement,

I gave run for v3 on H6 GS1 TVbox and what i discovered:

1. I have frequent hard hangs if DVFS is enabled (hard reset required),

2. hangs seems to be related to operating points changing - as limiting OPP table to any single entry (tested on 5 highest OPP ) makes my GS1 stable working,

3. hang seems to be exactly related to OPP changes as having OPP table even with just 2 entries already gives hangs,

4. tunings with <regulator-ramp-delay> makes no difference (tested with 0, 2500 and 25000). Also increasing <regulator-enable-ramp-delay> 2 times up (to 64000) makes no change.

Now I have 2 hypothesis:

a. issue is SW related: software operations in DVFS are somehow "unsafe" at touching hardware (is it possible we have i.e. concurrency issue here?);

b. issue is HW related: i.e. in steep-up OPP, time between sending change Vdd-gpu command to HW for increasing Vdd and sending command to HW for increasing GPU freq is too short.

To investigate further I done following test: limit OPP table to 4 entries+all 4 entries have the same Vdd.

If this test will pass the we know issue is b\.
If it will fail - then issue is a\.

And on my GS1 this test fails....so for me issue is a\ likely….

let me know how i can help!

br

#17 lore raw

Re: [PATCH v3 13/14] [DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table

Hi,

Quoted 132 lines · Piotr Oniszczuk
Quoted 103 lines

Wiadomość napisana przez Clément Péron <[email protected]> w dniu 09.07.2020, o godz. 16:03:

Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6.

The voltage range is set with minival voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator.

---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 80 ++++++++++++++++++++

1 file changed, 80 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +71 -0
index 8f514a2169aa..a69f9e09a829 100644
@@ -174,6 +174,7 @@ gpu: gpu@1800000 {
                      clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
                      clock-names = "core", "bus";
                      resets = <&ccu RST_BUS_GPU>;
+                     operating-points-v2 = <&gpu_opp_table>;
                      #cooling-cells = <2>;
                      status = "disabled";
              };
@@ -1036,4 +1037,83 @@ map0 {
                      };
              };
      };
+
+     gpu_opp_table: gpu-opp-table {
+             compatible = "operating-points-v2";
+
+             opp@216000000 {
+                     opp-hz = /bits/ 64 <216000000>;
+                     opp-microvolt = <810000 810000 1200000>;
+             };
+
+             opp@264000000 {
+                     opp-hz = /bits/ 64 <264000000>;
+                     opp-microvolt = <810000 810000 1200000>;
+             };
+
+             opp@312000000 {
+                     opp-hz = /bits/ 64 <312000000>;
+                     opp-microvolt = <810000 810000 1200000>;
+             };
+
+             opp@336000000 {
+                     opp-hz = /bits/ 64 <336000000>;
+                     opp-microvolt = <810000 810000 1200000>;
+             };
+
+             opp@360000000 {
+                     opp-hz = /bits/ 64 <360000000>;
+                     opp-microvolt = <820000 820000 1200000>;
+             };
+
+             opp@384000000 {
+                     opp-hz = /bits/ 64 <384000000>;
+                     opp-microvolt = <830000 830000 1200000>;
+             };
+
+             opp@408000000 {
+                     opp-hz = /bits/ 64 <408000000>;
+                     opp-microvolt = <840000 840000 1200000>;
+             };
+
+             opp@420000000 {
+                     opp-hz = /bits/ 64 <420000000>;
+                     opp-microvolt = <850000 850000 1200000>;
+             };
+
+             opp@432000000 {
+                     opp-hz = /bits/ 64 <432000000>;
+                     opp-microvolt = <860000 860000 1200000>;
+             };
+
+             opp@456000000 {
+                     opp-hz = /bits/ 64 <456000000>;
+                     opp-microvolt = <870000 870000 1200000>;
+             };
+
+             opp@504000000 {
+                     opp-hz = /bits/ 64 <504000000>;
+                     opp-microvolt = <890000 890000 1200000>;
+             };
+
+             opp@540000000 {
+                     opp-hz = /bits/ 64 <540000000>;
+                     opp-microvolt = <910000 910000 1200000>;
+             };
+
+             opp@576000000 {
+                     opp-hz = /bits/ 64 <576000000>;
+                     opp-microvolt = <930000 930000 1200000>;
+             };
+
+             opp@624000000 {

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi map0 { · line 1119

Quoted 10 lines
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +9 -0
+                     opp-hz = /bits/ 64 <624000000>;
+                     opp-microvolt = <950000 950000 1200000>;
+             };
+
+             opp@756000000 {
+                     opp-hz = /bits/ 64 <756000000>;
+                     opp-microvolt = <1040000 1040000 1200000>;
+             };
+     };
 };

Clement,

I gave run for v3 on H6 GS1 TVbox and what i discovered:

1. I have frequent hard hangs if DVFS is enabled (hard reset required),

2. hangs seems to be related to operating points changing - as limiting OPP table to any single entry (tested on 5 highest OPP ) makes my GS1 stable working,

3. hang seems to be exactly related to OPP changes as having OPP table even with just 2 entries already gives hangs,

4. tunings with <regulator-ramp-delay> makes no difference (tested with 0, 2500 and 25000). Also increasing <regulator-enable-ramp-delay> 2 times up (to 64000) makes no change.

Now I have 2 hypothesis:

a. issue is SW related: software operations in DVFS are somehow "unsafe" at touching hardware (is it possible we have i.e. concurrency issue here?);

b. issue is HW related: i.e. in steep-up OPP, time between sending change Vdd-gpu command to HW for increasing Vdd and sending command to HW for increasing GPU freq is too short.

Quoted 8 lines

To investigate further I done following test: limit OPP table to 4 entries+all 4 entries have the same Vdd.

If this test will pass the we know issue is b\.
If it will fail - then issue is a\.

And on my GS1 this test fails....so for me issue is a\ likely….

let me know how i can help!

Yes it definitely helps, thanks !

+CC linux-sunxi

If someone wants to have a look at the sunxi-ng clk driver.

Regards,
Clement

Quoted 2 lines

br

#18 lore raw

PATCH v3 14/14 arm64: dts: allwinner: force GPU regulator to be always

In reply to Clément Péron
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +1 -0
index 3f7ceeb1a767..14257f7476b8 100644
@@ -245,6 +245,7 @@ reg_dcdca: dcdca {
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-always-on;
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
Signature · 1 line
2.25.1
#19 lore raw
In reply to Clément Péron

Hi,

Quoted 7 lines · Clément Péron

Hi,

This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.

Quoted 5 lines

We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.

First patches [01-07] should not change the actual behavior and introduce a proper panfrost_devfreq struct.

Just saw that some changes have been made and pushed to 5.8-rc4.

I will push a v4 up to date.

Regards,
Clement

Quoted 47 lines

Regards,
Clément

Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fix opp_set_regulator before adding opp_table (introduce in v2)
- Call err_fini in case opp_add_table failed

Changes since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name path
- Drop device_property_test patch
- Add rename error labels patch

Clément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introduce panfrost_devfreq struct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels in device_init drm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always

 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   |   1 +
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 102 ++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/gpu/drm/panfrost/panfrost_devfreq.c   | 175 ++++++++++++------
 drivers/gpu/drm/panfrost/panfrost_devfreq.h   |  30 ++-
 drivers/gpu/drm/panfrost/panfrost_device.c    |  61 +++---
 drivers/gpu/drm/panfrost/panfrost_device.h    |  14 +-
 drivers/gpu/drm/panfrost/panfrost_drv.c       |  15 +-
 drivers/gpu/drm/panfrost/panfrost_job.c       |  10 +-
 9 files changed, 296 insertions(+), 113 deletions(-)

--
2.25.1