usb: cdns3: ep0: delete the unnecessary operation
Subsystems (3)
PATCH 1/1 usb: cdns3: ep0: delete the unnecessary operation
It doesn't need to enable/disable L1 on the fly for EP0 transfer, we only need to enable L1 after SET_CONFIGURATION.
This code may be introduced by careless.
Cc Pawel Laszczak <[email protected]>
Signed-off-by Peter Chen <[email protected]>
--- drivers/usb/cdns3/ep0.c | 3 --- 1 file changed, 3 deletions(-)
drivers/usb/cdns3/ep0.c +0 -3
@@ -122,8 +122,6 @@ static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev, priv_dev->ep0_stage =CDNS3_SETUP_STAGE ;writel ((send_erdy ?EP_CMD_ERDY :0 ) |EP_CMD_REQ_CMPL , &priv_dev->regs->ep_cmd); - -cdns3_allow_enable_l1 (priv_dev,1 ); }/**
@@ -639,7 +637,6 @@ void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)if (priv_dev->wait_for_setup && ep_sts_reg &EP_STS_IOC ) { priv_dev->wait_for_setup =0 ; -cdns3_allow_enable_l1 (priv_dev,0 );cdns3_ep0_setup_phase (priv_dev); }else if ((ep_sts_reg &EP_STS_IOC ) || (ep_sts_reg &EP_STS_ISP )) { priv_dev->ep0_data_dir = dir;
Signature · 1 line
2.17.1