rockchip: Add Engicam PX30.Core support
Subsystems (3)
cover rockchip: Add Engicam PX30.Core support
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
PX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards.
Possible baseboards are,
- EDIMM2.2 Starter Kit
- C.TOUCH 2.0 10.1" Open Frame
Right now boot support is working via Rockchip miniloader, will update to U-Boot TPL once the ddr supported.
Note: dts patches are in Linux mailing-list.
Any inputs?
Jagan.
Jagan Teki (7):
arm: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
arm: dts: rockchip: Add Engicam PX30.Core SOM
rockchip: px30: Add EVB_PX30 Kconfig help
rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
arm: dts: rockchip: px30: Add Engicam C.TOUCH 2.0 10.1" OF
rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
doc: rockchip: Document Rockchip miniloader flashing
arch/arm/dts/Makefile | 4 +- arch/arm/dts/px30-engicam-common.dtsi | 31 +++ arch/arm/dts/px30-engicam-ctouch2-of10.dtsi | 7 + arch/arm/dts/px30-engicam-edimm2.2.dtsi | 7 + arch/arm/dts/px30-px30-core-ctouch2-of10.dts | 21 ++ arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 ++ arch/arm/dts/px30-px30-core.dtsi | 250 ++++++++++++++++++ arch/arm/mach-rockchip/px30/Kconfig | 18 ++ board/rockchip/evb_px30/MAINTAINERS | 12 + configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++ configs/px30-core-edimm2.2-px30_defconfig | 108 ++++++++ doc/board/rockchip/rockchip.rst | 40 ++- 12 files changed, 625 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/px30-engicam-common.dtsi create mode 100644 arch/arm/dts/px30-engicam-ctouch2-of10.dtsi create mode 100644 arch/arm/dts/px30-engicam-edimm2.2.dtsi create mode 100644 arch/arm/dts/px30-px30-core-ctouch2-of10.dts create mode 100644 arch/arm/dts/px30-px30-core-edimm2.2.dts create mode 100644 arch/arm/dts/px30-px30-core.dtsi create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig create mode 100644 configs/px30-core-edimm2.2-px30_defconfig
Signature · 1 line
2.25.1
PATCH 1/7 arm: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
SOM's like PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
---
Note:
- Linux ML link:
https://lkml.org/lkml/2020/7/23/518
arch/arm/dts/px30-engicam-common.dtsi | 31 +++++++++++++++++++++++++ arch/arm/dts/px30-engicam-edimm2.2.dtsi | 7 ++++++ 2 files changed, 38 insertions(+) create mode 100644 arch/arm/dts/px30-engicam-common.dtsi create mode 100644 arch/arm/dts/px30-engicam-edimm2.2.dtsi
arch/arm/dts/px30-engicam-common.dtsi new file +31 -0
@@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/ { + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; /* +5V */ + }; +}; + +&gmac { + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + status = "okay"; +}; + +&sdmmc { + vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +};
arch/arm/dts/px30-engicam-edimm2.2.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi"
Signature · 1 line
2.25.1
Re: [PATCH 1/7] arm: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
Quoted 17 lines · Jagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
Quoted 6 lines
SOM's like PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 61 lines
---
Note:
- Linux ML link:https://lkml.org/lkml/2020/7/23/518arch/arm/dts/px30-engicam-common.dtsi | 31 +++++++++++++++++++++++++ arch/arm/dts/px30-engicam-edimm2.2.dtsi | 7 ++++++ 2 files changed, 38 insertions(+)create mode 100644
arch/arm/dts/px30-engicam-common.dtsicreate mode 100644arch/arm/dts/px30-engicam-edimm2.2.dtsiarch/arm/dts/px30-engicam-common.dtsi new file +31
-0@@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/ { + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; /* +5V */ + }; +}; + +&gmac { + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + status = "okay"; +}; + +&sdmmc { + vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +};arch/arm/dts/px30-engicam-edimm2.2.dtsi new file +7
-0@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi"
PATCH 2/7 arm: dts: rockchip: Add Engicam PX30.Core SOM
In reply to Jagan TekiPX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
General features:
- Rockchip PX30
- Up to 2GB DDR4
- eMMC 4 GB expandible
- rest of PX30 features
PX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards.
Possible baseboards are,
- EDIMM2.2
- C.TOUCH 2.0 10.1" Open Frame
Add support for it.
---
Note:
- Linux ML link:
https://lkml.org/lkml/2020/7/23/519
arch/arm/dts/px30-px30-core.dtsi | 250 +++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 arch/arm/dts/px30-px30-core.dtsi
arch/arm/dts/px30-px30-core.dtsi new file +250 -0
@@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "engicam,px30-px30-core", "rockchip,px30"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_log"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sys"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vcc_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v0_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc5v0_host"; + }; + }; + }; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_3v3>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3>; + pmuio2-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + vqmmc-supply = <&vcc_3v3>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +};
Signature · 1 line
2.25.1
Re: [PATCH 2/7] arm: dts: rockchip: Add Engicam PX30.Core SOM
Quoted 11 lines · Jagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
General features:
- Rockchip PX30
- Up to 2GB DDR4
- eMMC 4 GB expandible
- rest of PX30 featuresPX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards.
Quoted 7 lines
Possible baseboards are,
- EDIMM2.2
- C.TOUCH 2.0 10.1" Open FrameAdd support for it.
Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 265 lines
---
Note:
- Linux ML link:https://lkml.org/lkml/2020/7/23/519arch/arm/dts/px30-px30-core.dtsi | 250 +++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+)create mode 100644
arch/arm/dts/px30-px30-core.dtsiarch/arm/dts/px30-px30-core.dtsi new file +250
-0@@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "engicam,px30-px30-core", "rockchip,px30"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_log"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sys"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vcc_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v0_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc5v0_host"; + }; + }; + }; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_3v3>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3>; + pmuio2-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + vqmmc-supply = <&vcc_3v3>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +};
PATCH 3/7 rockchip: px30: Add EVB_PX30 Kconfig help
In reply to Jagan TekiTARGET_EVB_PX30 can be possible to use other px30 boards.
Add the help text for existing EVB, so-that the new boards which are resuing this config option can mention their board help text.
This would help to track which boards are using EVB_PX30 config.
--- arch/arm/mach-rockchip/px30/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/mach-rockchip/px30/Kconfig +5 -0
@@ -2,6 +2,11 @@ if ROCKCHIP_PX30 config TARGET_EVB_PX30 bool "EVB_PX30" + help + This target config option used for below listed px30 boards. + + EVB_PX30: + * EVB_PX30 is an evaluation board for Rockchip PX30. config ROCKCHIP_BOOT_MODE_REG default 0xff010200
Signature · 1 line
2.25.1
Re: [PATCH 3/7] rockchip: px30: Add EVB_PX30 Kconfig help
Quoted 9 lines · Jagan Teki
TARGET_EVB_PX30can be possible to use other px30 boards.Add the help text for existing EVB, so-that the new boards which are resuing this config option can mention their board help text.
This would help to track which boards are using
EVB_PX30config.Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 20 lines
--- arch/arm/mach-rockchip/px30/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/mach-rockchip/px30/Kconfig +5
-0@@ -2,6 +2,11 @@ if ROCKCHIP_PX30 config TARGET_EVB_PX30 bool "EVB_PX30" + help + This target config option used for below listed px30 boards. + + EVB_PX30: + * EVB_PX30 is an evaluation board for Rockchip PX30. config ROCKCHIP_BOOT_MODE_REG default 0xff010200
PATCH 4/7 rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
In reply to Jagan TekiPX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
---
Note:
- Linux ML link:
https://lkml.org/lkml/2020/7/23/520
arch/arm/dts/Makefile | 3 +- arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 +++++ arch/arm/mach-rockchip/px30/Kconfig | 6 ++ board/rockchip/evb_px30/MAINTAINERS | 6 ++ configs/px30-core-edimm2.2-px30_defconfig | 108 ++++++++++++++++++++++ 5 files changed, 143 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/px30-px30-core-edimm2.2.dts create mode 100644 configs/px30-core-edimm2.2-px30_defconfig
arch/arm/dts/Makefile +2 -1
@@ -71,7 +71,8 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ - px30-firefly.dtb + px30-firefly.dtb \ + px30-px30-core-edimm2.2.dtb dtb-$(CONFIG_ROCKCHIP_RK3036) += \ rk3036-sdk.dtb
arch/arm/dts/px30-px30-core-edimm2.2.dts new file +21 -0
@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-edimm2.2.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core EDIMM2.2 Starter Kit"; + compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};
arch/arm/mach-rockchip/px30/Kconfig +6 -0
@@ -8,6 +8,12 @@ config TARGET_EVB_PX30 EVB_PX30: * EVB_PX30 is an evaluation board for Rockchip PX30. + PX30.Core EDIMM2.2: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam. + * PX30.Core needs to mount on top of EDIMM2.2 for creating complete + PX30.Core EDIMM2.2 Starter Kit. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200
board/rockchip/evb_px30/MAINTAINERS +6 -0
@@ -5,3 +5,9 @@ F: board/rockchip/evb_px30 F: include/configs/evb_px30.h F: configs/evb-px30_defconfig F: configs/firefly-px30_defconfig + +PX30-Core-EDIMM2.2 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: configs/px30-core-edimm2.2-px30_defconfig
configs/px30-core-edimm2.2-px30_defconfig new file +108 -0
108 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH 4/7] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
Hi Jagan,
Quoted 11 lines · Jagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by Jagan Teki <[email protected]>
Is there any config need goes to -u-boot.dtsi?
For this patch:
Thanks,
- Kever
Quoted 200 lines
---
Note:
- Linux ML link:https://lkml.org/lkml/2020/7/23/520arch/arm/dts/Makefile | 3 +- arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 +++++ arch/arm/mach-rockchip/px30/Kconfig | 6 ++ board/rockchip/evb_px30/MAINTAINERS | 6 ++ configs/px30-core-edimm2.2-px30_defconfig | 108 ++++++++++++++++++++++ 5 files changed, 143 insertions(+), 1 deletion(-)create mode 100644
arch/arm/dts/px30-px30-core-edimm2.2.dtscreate mode 100644 configs/px30-core-edimm2.2-px30_defconfigarch/arm/dts/Makefile +2
-1@@ -71,7 +71,8 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ - px30-firefly.dtb + px30-firefly.dtb \ + px30-px30-core-edimm2.2.dtb dtb-$(CONFIG_ROCKCHIP_RK3036) += \ rk3036-sdk.dtbarch/arm/dts/px30-px30-core-edimm2.2.dts new file +21
-0@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-edimm2.2.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core EDIMM2.2 Starter Kit"; + compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};arch/arm/mach-rockchip/px30/Kconfig +6
-0@@ -8,6 +8,12 @@ config TARGET_EVB_PX30 EVB_PX30: * EVB_PX30 is an evaluation board for Rockchip PX30. + PX30.Core EDIMM2.2: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam. + * PX30.Core needs to mount on top of EDIMM2.2 for creating complete + PX30.Core EDIMM2.2 Starter Kit. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200board/rockchip/evb_px30/MAINTAINERS +6
-0@@ -5,3 +5,9 @@ F: board/rockchip/evb_px30 F: include/configs/evb_px30.h F: configs/evb-px30_defconfig F: configs/firefly-px30_defconfig + +PX30-Core-EDIMM2.2 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: configs/px30-core-edimm2.2-px30_defconfigconfigs/px30-core-edimm2.2-px30_defconfig new file +108
-0@@ -0,0 +1,108 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_ROCKCHIP_PX30=y +CONFIG_TARGET_EVB_PX30=y +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xFF160000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_CONSOLE_MUX is not set +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-edimm2.2.dtb" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_STACK_R=y +# CONFIG_TPL_BANNER_PRINT is not set +CONFIG_SPL_CRC32_SUPPORT=y +CONFIG_SPL_ATF=y +# CONFIG_TPL_FRAMEWORK is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LZMADEC is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPT=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-edimm2.2" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_FASTBOOT_BUF_SIZE=0x04000000 +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_OTP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_ROCKCHIP_SDRAM_COMMON=y +CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_SOUND=y +CONFIG_SYSRESET=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_LCD=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y +# CONFIG_EFI_LOADER is not set
PATCH 5/7 arm: dts: rockchip: px30: Add Engicam C.TOUCH 2.0 10.1" OF
In reply to Jagan TekiEngicam C.TOUCH 2.0 10.1" Open Frame is a Carrier board with Capacitive touch 10.1" open frame.
Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
SOM's like PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
Add support for it.
---
Note:
- Linux ML link:
https://lkml.org/lkml/2020/7/23/522
arch/arm/dts/px30-engicam-ctouch2-of10.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 arch/arm/dts/px30-engicam-ctouch2-of10.dtsi
arch/arm/dts/px30-engicam-ctouch2-of10.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi"
Signature · 1 line
2.25.1
PATCH 6/7 rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
In reply to Jagan TekiPX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 10.1" Open Frame is a Carrier board with Capacitive touch 10.1" open frame from Engicam.
PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
Add support for it.
---
Note:
- Linux ML link:
https://lkml.org/lkml/2020/7/23/523
arch/arm/dts/Makefile | 1 + arch/arm/dts/px30-px30-core-ctouch2-of10.dts | 21 ++++ arch/arm/mach-rockchip/px30/Kconfig | 7 ++ board/rockchip/evb_px30/MAINTAINERS | 6 + configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++ 5 files changed, 143 insertions(+) create mode 100644 arch/arm/dts/px30-px30-core-ctouch2-of10.dts create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig
arch/arm/dts/Makefile +1 -0
@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ px30-firefly.dtb \ + px30-px30-core-ctouch2-of10.dtb \ px30-px30-core-edimm2.2.dtb dtb-$(CONFIG_ROCKCHIP_RK3036) += \
arch/arm/dts/px30-px30-core-ctouch2-of10.dts new file +21 -0
@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-ctouch2-of10.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame"; + compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};
arch/arm/mach-rockchip/px30/Kconfig +7 -0
@@ -14,6 +14,13 @@ config TARGET_EVB_PX30 * PX30.Core needs to mount on top of EDIMM2.2 for creating complete PX30.Core EDIMM2.2 Starter Kit. + PX30.Core CTOUCH2 OF10: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * CTOUCH2 OF 10 is a Carrier board with Capacitive touch 10.1" + Open frame from Engicam. + * PX30.Core needs to mount on top of CTOUCH2 OF10 for creating complete + PX30.Core C.TOUCH 2.0 10.1\" Open Frame. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200
board/rockchip/evb_px30/MAINTAINERS +6 -0
@@ -11,3 +11,9 @@ M: Jagan Teki <[email protected]> M: Suniel Mahesh <[email protected]> S: Maintained F: configs/px30-core-edimm2.2-px30_defconfig + +PX30-Core-CTOUCH2-OF10 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: configs/px30-core-ctouch2-of10-px30_defconfig
configs/px30-core-ctouch2-of10-px30_defconfig new file +108 -0
108 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH 6/7] rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
Quoted 11 lines · Jagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 10.1" Open Frame is a Carrier board with Capacitive touch 10.1" open frame from Engicam.
PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
Add support for it.
Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 199 lines
---
Note:
- Linux ML link:https://lkml.org/lkml/2020/7/23/523arch/arm/dts/Makefile | 1 + arch/arm/dts/px30-px30-core-ctouch2-of10.dts | 21 ++++ arch/arm/mach-rockchip/px30/Kconfig | 7 ++ board/rockchip/evb_px30/MAINTAINERS | 6 + configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++ 5 files changed, 143 insertions(+)create mode 100644
arch/arm/dts/px30-px30-core-ctouch2-of10.dtscreate mode 100644 configs/px30-core-ctouch2-of10-px30_defconfigarch/arm/dts/Makefile +1
-0@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ px30-firefly.dtb \ + px30-px30-core-ctouch2-of10.dtb \ px30-px30-core-edimm2.2.dtb dtb-$(CONFIG_ROCKCHIP_RK3036) += \arch/arm/dts/px30-px30-core-ctouch2-of10.dts new file +21
-0@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-ctouch2-of10.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame"; + compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};arch/arm/mach-rockchip/px30/Kconfig +7
-0@@ -14,6 +14,13 @@ config TARGET_EVB_PX30 * PX30.Core needs to mount on top of EDIMM2.2 for creating complete PX30.Core EDIMM2.2 Starter Kit. + PX30.Core CTOUCH2 OF10: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * CTOUCH2 OF 10 is a Carrier board with Capacitive touch 10.1" + Open frame from Engicam. + * PX30.Core needs to mount on top of CTOUCH2 OF10 for creating complete + PX30.Core C.TOUCH 2.0 10.1\" Open Frame. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200board/rockchip/evb_px30/MAINTAINERS +6
-0@@ -11,3 +11,9 @@ M: Jagan Teki <[email protected]> M: Suniel Mahesh <[email protected]> S: Maintained F: configs/px30-core-edimm2.2-px30_defconfig + +PX30-Core-CTOUCH2-OF10 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: configs/px30-core-ctouch2-of10-px30_defconfigconfigs/px30-core-ctouch2-of10-px30_defconfig new file +108
-0@@ -0,0 +1,108 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_ROCKCHIP_PX30=y +CONFIG_TARGET_EVB_PX30=y +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xFF160000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_CONSOLE_MUX is not set +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2-of10.dtb" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_STACK_R=y +# CONFIG_TPL_BANNER_PRINT is not set +CONFIG_SPL_CRC32_SUPPORT=y +CONFIG_SPL_ATF=y +# CONFIG_TPL_FRAMEWORK is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LZMADEC is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPT=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2-of10" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_FASTBOOT_BUF_SIZE=0x04000000 +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_OTP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_ROCKCHIP_SDRAM_COMMON=y +CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_SOUND=y +CONFIG_SYSRESET=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_LCD=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y +# CONFIG_EFI_LOADER is not set
PATCH 7/7 doc: rockchip: Document Rockchip miniloader flashing
In reply to Jagan TekiThis would be useful and recommended boot flow for new boards which has doesn't have the DDR support yet in mainline.
Sometimes it is very useful for debugging mainline DDR support.
Documen it for px30 boot flow.
--- doc/board/rockchip/rockchip.rst | 40 ++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-)
doc/board/rockchip/rockchip.rst +39 -1
@@ -123,6 +123,9 @@ To build rk3399 boards:: Flashing -------- +1. Package the image with U-Boot TPL/SPL +----------------------------------------- + SD Card ^^^^^^^
@@ -187,6 +190,39 @@ Copy SPI boot images into SD card and boot from SD:: sf erase 0x60000 +$filesize sf write $kernel_addr_r 0x60000 ${filesize} +2. Package the image with Rockchip miniloader +--------------------------------------------- + +Image package with Rockchip miniloader requires robin [1]. + +Create idbloader.img + +.. code-block:: none + + cd u-boot + ./tools/mkimage -n px30 -T rksd -d rkbin/bin/rk33/px30_ddr_333MHz_v1.15.bin idbloader.img + cat rkbin/bin/rk33/px30_miniloader_v1.22.bin >> idbloader.img + sudo dd if=idbloader.img of=/dev/sda seek=64 + +Create trust.img + +.. code-block:: none + + cd rkbin + ./tools/trust_merger RKTRUST/PX30TRUST.ini + sudo dd if=trust.img of=/dev/sda seek=24576 + +Create uboot.img + +.. code-block:: none + + rbink/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img 0x200000 + sudo dd if=uboot.img of=/dev/sda seek=16384 + +Note: +1. 0x200000 is load address and it's an optional in some platforms. +2. rkbin binaries are kept on updating, so would recommend to use the latest versions. + TODO ----
@@ -195,5 +231,7 @@ TODO - Document SPI flash boot - Add missing SoC's with it boards list +[1] https://github.com/rockchip-linux/rkbin + .. Jagan Teki <[email protected]> -.. Tuesday 02 June 2020 12:18:57 AM IST +.. Thursday 23 July 2020 04:50:22 PM IST
Signature · 1 line
2.25.1
Re: [PATCH 7/7] doc: rockchip: Document Rockchip miniloader flashing
Hi Jagan,
Quoted 6 lines · Jagan Teki
This would be useful and recommended boot flow for new boards which has doesn't have the DDR support yet in mainline.
Sometimes it is very useful for debugging mainline DDR support.
Documen it for px30 boot flow.
typo for Doc?
Quoted 21 lines
Signed-off-by Jagan Teki <[email protected]>--- doc/board/rockchip/rockchip.rst | 40 ++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-)doc/board/rockchip/rockchip.rst +3
-0@@ -123,6 +123,9 @@ To build rk3399 boards:: Flashing -------- +1. Package the image with U-Boot TPL/SPL +----------------------------------------- + SD Card ^^^^^^^
doc/board/rockchip/rockchip.rst Copy SPI boot images into SD card and boot from SD:: · line 196
Quoted 7 lines
doc/board/rockchip/rockchip.rst +4
-0@@ -187,6 +190,39 @@ Copy SPI boot images into SD card and boot from SD:: sf erase 0x60000 +$filesize sf write $kernel_addr_r 0x60000 ${filesize} +2. Package the image with Rockchip miniloader +--------------------------------------------- + +Image package with Rockchip miniloader requires robin [1].
typo robin/rkbin
doc/board/rockchip/rockchip.rst Copy SPI boot images into SD card and boot from SD:: · line 200
Quoted 4 lines
doc/board/rockchip/rockchip.rst +4
-0+ +Create idbloader.img + +.. code-block:: none
What do you mean by all these 'code-block'? I think we can just say use all the binaries from rkbin?
doc/board/rockchip/rockchip.rst Copy SPI boot images into SD card and boot from SD:: · line 204
Quoted 4 lines
doc/board/rockchip/rockchip.rst +4
-0+ + cd u-boot + ./tools/mkimage -n px30 -T rksd -d rkbin/bin/rk33/px30_ddr_333MHz_v1.15.bin idbloader.img + cat rkbin/bin/rk33/px30_miniloader_v1.22.bin >> idbloader.img
It would be better to use new format instead of 'cat' for miniloader part.
Quoted 9 lines
doc/board/rockchip/rockchip.rst +9
-0+ sudo dd if=idbloader.img of=/dev/sda seek=64 + +Create trust.img + +.. code-block:: none + + cd rkbin + ./tools/trust_merger RKTRUST/PX30TRUST.ini + sudo dd if=trust.img of=/dev/sda seek=24576
doc/board/rockchip/rockchip.rst Copy SPI boot images into SD card and boot from SD:: · line 223
Quoted 10 lines
doc/board/rockchip/rockchip.rst +10
-0+ +Create uboot.img + +.. code-block:: none + + rbink/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img 0x200000 + sudo dd if=uboot.img of=/dev/sda seek=16384 + +Note: +1. 0x200000 is load address and it's an optional in some platforms.
0x200000 is CONFIG_SYS_TEXT_BASE, use this macro will help user better under stand.
Quoted 14 lines
doc/board/rockchip/rockchip.rst +5
-1+2. rkbin binaries are kept on updating, so would recommend to use the latest versions. + TODO ----@@ -195,5 +231,7 @@ TODO - Document SPI flash boot - Add missing SoC's with it boards list +[1] https://github.com/rockchip-linux/rkbin + .. Jagan Teki <[email protected]> -.. Tuesday 02 June 2020 12:18:57 AM IST +.. Thursday 23 July 2020 04:50:22 PM IST