rockchip: Add Engicam PX30.Core support
Subsystems (4)
v4 cover rockchip: Add Engicam PX30.Core support
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
PX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards.
Possible baseboards are,
- EDIMM2.2 Starter Kit
- C.TOUCH 2.0
Note: dts patches are in Linux mailing-list.
Changes for v4:
- rebase on master
- on top of Heiko, ram patch
https://patchwork.ozlabs.org/project/uboot/patch/20201001184003.3704604-1-heiko at sntech.det/
thanks,
Jagan.
Jagan Teki (7):
arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
rockchip: px30: Add EVB_PX30 Kconfig help
board: engicam: Attach i.MX6 common code
rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
rockchip: Add Engicam PX30.Core C.TOUCH 2.0
doc: rockchip: Document Rockchip miniloader flashing
Michael Trimarchi (1):
arm64: dts: rockchip: Add Engicam PX30.Core SOM
arch/arm/dts/Makefile | 2 + arch/arm/dts/px30-engicam-common.dtsi | 39 ++++ arch/arm/dts/px30-engicam-ctouch2.dtsi | 8 + arch/arm/dts/px30-engicam-edimm2.2.dtsi | 7 + arch/arm/dts/px30-px30-core-ctouch2.dts | 22 ++ arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 ++ arch/arm/dts/px30-px30-core.dtsi | 232 ++++++++++++++++++++++ arch/arm/mach-rockchip/px30/Kconfig | 22 ++ board/engicam/common/Kconfig | 8 + board/engicam/common/Makefile | 7 +- board/engicam/imx6q/Kconfig | 2 + board/engicam/imx6ul/Kconfig | 2 + board/engicam/px30_core/Kconfig | 16 ++ board/engicam/px30_core/MAINTAINERS | 13 ++ board/engicam/px30_core/Makefile | 7 + board/engicam/px30_core/px30_core.c | 4 + configs/px30-core-ctouch2-px30_defconfig | 108 ++++++++++ configs/px30-core-edimm2.2-px30_defconfig | 108 ++++++++++ doc/board/rockchip/rockchip.rst | 40 +++- include/configs/px30_core.h | 15 ++ 20 files changed, 680 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/px30-engicam-common.dtsi create mode 100644 arch/arm/dts/px30-engicam-ctouch2.dtsi create mode 100644 arch/arm/dts/px30-engicam-edimm2.2.dtsi create mode 100644 arch/arm/dts/px30-px30-core-ctouch2.dts create mode 100644 arch/arm/dts/px30-px30-core-edimm2.2.dts create mode 100644 arch/arm/dts/px30-px30-core.dtsi create mode 100644 board/engicam/common/Kconfig create mode 100644 board/engicam/px30_core/Kconfig create mode 100644 board/engicam/px30_core/MAINTAINERS create mode 100644 board/engicam/px30_core/Makefile create mode 100644 board/engicam/px30_core/px30_core.c create mode 100644 configs/px30-core-ctouch2-px30_defconfig create mode 100644 configs/px30-core-edimm2.2-px30_defconfig create mode 100644 include/configs/px30_core.h
Signature · 1 line
2.25.1
PATCH v4 1/8 arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
SOM's like PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
---
Changes for v4:
- none
arch/arm/dts/px30-engicam-common.dtsi | 39 +++++++++++++++++++++++++ arch/arm/dts/px30-engicam-edimm2.2.dtsi | 7 +++++ 2 files changed, 46 insertions(+) create mode 100644 arch/arm/dts/px30-engicam-common.dtsi create mode 100644 arch/arm/dts/px30-engicam-edimm2.2.dtsi
arch/arm/dts/px30-engicam-common.dtsi new file +39 -0
@@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/ { + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; /* +5V */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + card-detect-delay = <800>; + vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ + vqmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +};
arch/arm/dts/px30-engicam-edimm2.2.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi"
Signature · 1 line
2.25.1
PATCH v4 2/8 arm64: dts: rockchip: Add Engicam PX30.Core SOM
In reply to Jagan TekiFrom: Michael Trimarchi <[email protected]>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
General features:
- Rockchip PX30
- Up to 2GB DDR4
- eMMC 4 GB expandible
- rest of PX30 features
PX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards.
Possible baseboards are,
- EDIMM2.2
- C.TOUCH 2.0
Add support for it.
---
Changes for v4:
- none
arch/arm/dts/px30-px30-core.dtsi | 232 +++++++++++++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 arch/arm/dts/px30-px30-core.dtsi
arch/arm/dts/px30-px30-core.dtsi new file +232 -0
@@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons + * Copyright (c) 2020 Amarula Solutons(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "engicam,px30-px30-core", "rockchip,px30"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic at 20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_3v3>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3>; + pmuio2-supply = <&vcc_3v3>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +};
Signature · 1 line
2.25.1
PATCH v4 3/8 rockchip: px30: Add EVB_PX30 Kconfig help
In reply to Jagan TekiTARGET_EVB_PX30 can be possible to use other px30 boards.
Add the help text for existing EVB, so-that the new boards which are resuing this config option can mention their board help text.
This would help to track which boards are using EVB_PX30 config.
---
Changes for v4:
- none
arch/arm/mach-rockchip/px30/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/mach-rockchip/px30/Kconfig +5 -0
@@ -2,6 +2,11 @@ if ROCKCHIP_PX30 config TARGET_EVB_PX30 bool "EVB_PX30" + help + This target config option used for below listed px30 boards. + + EVB_PX30: + * EVB_PX30 is an evaluation board for Rockchip PX30. config TARGET_ODROID_GO2 bool "ODROID_GO2"
Signature · 1 line
2.25.1
PATCH v4 4/8 board: engicam: Attach i.MX6 common code
In reply to Jagan TekiThe existing common code for Engicam boards uses i.MX6, so attach that into i.MX6 Engicam boards so-that adding new SoC variants of Engicam boards become meaningful.
Add support for it.
---
Changes for v4:
- none
board/engicam/common/Kconfig | 8 ++++++++ board/engicam/common/Makefile | 7 +++++-- board/engicam/imx6q/Kconfig | 2 ++ board/engicam/imx6ul/Kconfig | 2 ++ 4 files changed, 17 insertions(+), 2 deletions(-) create mode 100644 board/engicam/common/Kconfig
board/engicam/common/Kconfig new file +8 -0
@@ -0,0 +1,8 @@ +config IMX6_ENGICAM_COMMON + bool "Engicam i.MX6 Common code" + depends on SPL && MX6 + default y if TARGET_MX6Q_ENGICAM || TARGET_MX6UL_ENGICAM + help + Common SPL and U-Boot proper code for Engicam i.MX6 targets. + + Enable it in board Kconfig if it uses i.MX6 variant Engicam boards.
board/engicam/common/Makefile +5 -2
@@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0+ # Copyright (C) 2016 Amarula Solutions B.V. -obj-y := board.o -obj-$(CONFIG_SPL_BUILD) += spl.o +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_IMX6_ENGICAM_COMMON) += spl.o +else +obj-$(CONFIG_IMX6_ENGICAM_COMMON) += board.o +endif
board/engicam/imx6q/Kconfig +2 -0
@@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "imx6-engicam" +source "board/engicam/common/Kconfig" + endif
board/engicam/imx6ul/Kconfig +2 -0
@@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "imx6-engicam" +source "board/engicam/common/Kconfig" + endif
Signature · 1 line
2.25.1
Re: [PATCH v4 4/8] board: engicam: Attach i.MX6 common code
Quoted 8 lines · Jagan Teki
The existing common code for Engicam boards uses i.MX6, so attach that into i.MX6 Engicam boards so-that adding new SoC variants of Engicam boards become meaningful.
Add support for it.
Cc Stefano Babic <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 62 lines
---
Changes for v4:
- noneboard/engicam/common/Kconfig | 8 ++++++++ board/engicam/common/Makefile | 7 +++++-- board/engicam/imx6q/Kconfig | 2 ++ board/engicam/imx6ul/Kconfig | 2 ++ 4 files changed, 17 insertions(+), 2 deletions(-)create mode 100644 board/engicam/common/Kconfig
board/engicam/common/Kconfig new file +8
-0@@ -0,0 +1,8 @@ +config IMX6_ENGICAM_COMMON + bool "Engicam i.MX6 Common code" + depends on SPL && MX6 + default y if TARGET_MX6Q_ENGICAM || TARGET_MX6UL_ENGICAM + help + Common SPL and U-Boot proper code for Engicam i.MX6 targets. + + Enable it in board Kconfig if it uses i.MX6 variant Engicam boards.board/engicam/common/Makefile +5
-2@@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0+ # Copyright (C) 2016 Amarula Solutions B.V. -obj-y := board.o -obj-$(CONFIG_SPL_BUILD) += spl.o +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_IMX6_ENGICAM_COMMON) += spl.o +else +obj-$(CONFIG_IMX6_ENGICAM_COMMON) += board.o +endifboard/engicam/imx6q/Kconfig +2
-0@@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "imx6-engicam" +source "board/engicam/common/Kconfig" + endifboard/engicam/imx6ul/Kconfig +2
-0@@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "imx6-engicam" +source "board/engicam/common/Kconfig" + endif
PATCH v4 5/8 rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
In reply to Jagan TekiPX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
---
Changes for v4:
- drop ram change
- on top of https://patchwork.ozlabs.org/project/uboot/patch/20201001184003.3704604-1-heiko at sntech.de/
arch/arm/dts/Makefile | 1 + arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 +++++ arch/arm/mach-rockchip/px30/Kconfig | 10 ++ board/engicam/px30_core/Kconfig | 16 ++++ board/engicam/px30_core/MAINTAINERS | 7 ++ board/engicam/px30_core/Makefile | 7 ++ board/engicam/px30_core/px30_core.c | 4 + configs/px30-core-edimm2.2-px30_defconfig | 108 ++++++++++++++++++++++ include/configs/px30_core.h | 15 +++ 9 files changed, 189 insertions(+) create mode 100644 arch/arm/dts/px30-px30-core-edimm2.2.dts create mode 100644 board/engicam/px30_core/Kconfig create mode 100644 board/engicam/px30_core/MAINTAINERS create mode 100644 board/engicam/px30_core/Makefile create mode 100644 board/engicam/px30_core/px30_core.c create mode 100644 configs/px30-core-edimm2.2-px30_defconfig create mode 100644 include/configs/px30_core.h
arch/arm/dts/Makefile +1 -0
@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ px30-firefly.dtb \ + px30-px30-core-edimm2.2.dtb \ rk3326-odroid-go2.dtb dtb-$(CONFIG_ROCKCHIP_RK3036) += \
arch/arm/dts/px30-px30-core-edimm2.2.dts new file +21 -0
@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-edimm2.2.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core EDIMM2.2 Starter Kit"; + compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};
arch/arm/mach-rockchip/px30/Kconfig +10 -0
@@ -11,6 +11,15 @@ config TARGET_EVB_PX30 config TARGET_ODROID_GO2 bool "ODROID_GO2" +config TARGET_PX30_CORE + bool "Engicam PX30.Core" + help + PX30.Core EDIMM2.2: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam. + * PX30.Core needs to mount on top of EDIMM2.2 for creating complete + PX30.Core EDIMM2.2 Starter Kit. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200
@@ -44,6 +53,7 @@ config DEBUG_UART_CHANNEL For using the UART for early debugging the route to use needs to be declared (0 or 1). +source "board/engicam/px30_core/Kconfig" source "board/hardkernel/odroid_go2/Kconfig" source "board/rockchip/evb_px30/Kconfig"
board/engicam/px30_core/Kconfig new file +16 -0
@@ -0,0 +1,16 @@ +if TARGET_PX30_CORE + +config SYS_BOARD + default "px30_core" + +config SYS_VENDOR + default "engicam" + +config SYS_CONFIG_NAME + default "px30_core" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select RAM_PX30_DDR4 + +endif
board/engicam/px30_core/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +PX30-Core-EDIMM2.2 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: board/engicam/px30_core +F: include/configs/px30_core.h +F: configs/px30-core-edimm2.2-px30_defconfig
board/engicam/px30_core/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# +# Copyright (c) 2020 Amarula Solutions(India) +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += px30_core.o
board/engicam/px30_core/px30_core.c new file +4 -0
@@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (c) 2020 Amarula Solutions(India) +*/
configs/px30-core-edimm2.2-px30_defconfig new file +108 -0
108 lines not on this page · raw message
include/configs/px30_core.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020 Amarula Solutions(India) +*/ + +#ifndef __PX30_CORE_H +#define __PX30_CORE_H + +#include <configs/px30_common.h> + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#endif /* __PX30_CORE_H */
Signature · 1 line
2.25.1
Re: [PATCH v4 5/8] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
Quoted 5 lines · Jagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam.
Quoted 7 lines
PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by Jagan Teki <[email protected]>Signed-off-by Suniel Mahesh <[email protected]>
Thanks,
- Kever
Quoted 283 lines
---
Changes for v4:
- drop ram change
- on top of https://patchwork.ozlabs.org/project/uboot/patch/20201001184003.3704604-1-heiko at sntech.de/arch/arm/dts/Makefile | 1 + arch/arm/dts/px30-px30-core-edimm2.2.dts | 21 +++++ arch/arm/mach-rockchip/px30/Kconfig | 10 ++ board/engicam/px30_core/Kconfig | 16 ++++ board/engicam/px30_core/MAINTAINERS | 7 ++ board/engicam/px30_core/Makefile | 7 ++ board/engicam/px30_core/px30_core.c | 4 + configs/px30-core-edimm2.2-px30_defconfig | 108 ++++++++++++++++++++++ include/configs/px30_core.h | 15 +++ 9 files changed, 189 insertions(+)create mode 100644
arch/arm/dts/px30-px30-core-edimm2.2.dtscreate mode 100644 board/engicam/px30_core/Kconfig create mode 100644 board/engicam/px30_core/MAINTAINERS create mode 100644 board/engicam/px30_core/Makefile create mode 100644board/engicam/px30_core/px30_core.ccreate mode 100644 configs/px30-core-edimm2.2-px30_defconfig create mode 100644include/configs/px30_core.harch/arm/dts/Makefile +1
-0@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ px30-firefly.dtb \ + px30-px30-core-edimm2.2.dtb \ rk3326-odroid-go2.dtb dtb-$(CONFIG_ROCKCHIP_RK3036) += \arch/arm/dts/px30-px30-core-edimm2.2.dts new file +21
-0@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-edimm2.2.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core EDIMM2.2 Starter Kit"; + compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};arch/arm/mach-rockchip/px30/Kconfig +10
-0@@ -11,6 +11,15 @@ config TARGET_EVB_PX30 config TARGET_ODROID_GO2 bool "ODROID_GO2" +config TARGET_PX30_CORE + bool "Engicam PX30.Core" + help + PX30.Core EDIMM2.2: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * EDIMM2.2 is a Form Factor Capacitive Evaluation Board from Engicam. + * PX30.Core needs to mount on top of EDIMM2.2 for creating complete + PX30.Core EDIMM2.2 Starter Kit. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200@@ -44,6 +53,7 @@ config DEBUG_UART_CHANNEL For using the UART for early debugging the route to use needs to be declared (0 or 1). +source "board/engicam/px30_core/Kconfig" source "board/hardkernel/odroid_go2/Kconfig" source "board/rockchip/evb_px30/Kconfig"board/engicam/px30_core/Kconfig new file +16
-0@@ -0,0 +1,16 @@ +if TARGET_PX30_CORE + +config SYS_BOARD + default "px30_core" + +config SYS_VENDOR + default "engicam" + +config SYS_CONFIG_NAME + default "px30_core" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select RAM_PX30_DDR4 + +endifboard/engicam/px30_core/MAINTAINERS new file +7
-0@@ -0,0 +1,7 @@ +PX30-Core-EDIMM2.2 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: board/engicam/px30_core +F: include/configs/px30_core.h +F: configs/px30-core-edimm2.2-px30_defconfigboard/engicam/px30_core/Makefile new file +7
-0@@ -0,0 +1,7 @@ +# +# Copyright (c) 2020 Amarula Solutions(India) +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += px30_core.oboard/engicam/px30_core/px30_core.c new file +4
-0@@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (c) 2020 Amarula Solutions(India) +*/ configs/px30-core-edimm2.2-px30_defconfig new file +108
-0@@ -0,0 +1,108 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_ROCKCHIP_PX30=y +CONFIG_TARGET_PX30_CORE=y +CONFIG_DEBUG_UART_CHANNEL=1 +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_DEBUG_UART_BASE=0xFF160000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-edimm2.2" +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_CONSOLE_MUX is not set +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-edimm2.2.dtb" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_STACK_R=y +# CONFIG_TPL_BANNER_PRINT is not set +CONFIG_SPL_CRC32_SUPPORT=y +CONFIG_SPL_ATF=y +# CONFIG_TPL_FRAMEWORK is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LZMADEC is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPT=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_FASTBOOT_BUF_SIZE=0x04000000 +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_OTP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_ROCKCHIP_SDRAM_COMMON=y +CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_SOUND=y +CONFIG_SYSRESET=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_LCD=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=yinclude/configs/px30_core.h new file +15
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2020 Amarula Solutions(India) +*/ + +#ifndef __PX30_CORE_H +#define __PX30_CORE_H + +#include <configs/px30_common.h> + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#endif /* __PX30_CORE_H */
PATCH v4 6/8 arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
In reply to Jagan TekiEngicam C.TOUCH 2.0 is an EDIMM compliant general purpose carrier board with capacitive touch interface.
Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
SOM's like PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
---
Changes for v4:
- none
arch/arm/dts/px30-engicam-ctouch2.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 arch/arm/dts/px30-engicam-ctouch2.dtsi
arch/arm/dts/px30-engicam-ctouch2.dtsi new file +8 -0
@@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi"
Signature · 1 line
2.25.1
Re: [PATCH v4 6/8] arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
Quoted 12 lines · Jagan Teki
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose carrier board with capacitive touch interface.
Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
Quoted 7 lines
SOM's like PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by Jagan Teki <[email protected]>Signed-off-by Michael Trimarchi <[email protected]>
Thanks,
- Kever
Quoted 22 lines
---
Changes for v4:
- nonearch/arm/dts/px30-engicam-ctouch2.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)create mode 100644
arch/arm/dts/px30-engicam-ctouch2.dtsiarch/arm/dts/px30-engicam-ctouch2.dtsi new file +8
-0@@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include "px30-engicam-common.dtsi"
PATCH v4 7/8 rockchip: Add Engicam PX30.Core C.TOUCH 2.0
In reply to Jagan TekiPX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
---
Changes for v4:
- none
arch/arm/dts/Makefile | 1 + arch/arm/dts/px30-px30-core-ctouch2.dts | 22 +++++ arch/arm/mach-rockchip/px30/Kconfig | 7 ++ board/engicam/px30_core/MAINTAINERS | 6 ++ configs/px30-core-ctouch2-px30_defconfig | 108 +++++++++++++++++++++++ 5 files changed, 144 insertions(+) create mode 100644 arch/arm/dts/px30-px30-core-ctouch2.dts create mode 100644 configs/px30-core-ctouch2-px30_defconfig
arch/arm/dts/Makefile +1 -0
@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ px30-firefly.dtb \ + px30-px30-core-ctouch2.dtb \ px30-px30-core-edimm2.2.dtb \ rk3326-odroid-go2.dtb
arch/arm/dts/px30-px30-core-ctouch2.dts new file +22 -0
@@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-ctouch2.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core C.TOUCH 2.0"; + compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};
arch/arm/mach-rockchip/px30/Kconfig +7 -0
@@ -20,6 +20,13 @@ config TARGET_PX30_CORE * PX30.Core needs to mount on top of EDIMM2.2 for creating complete PX30.Core EDIMM2.2 Starter Kit. + PX30.Core CTOUCH2: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * CTOUCH2.0 is a general purpose Carrier board with capacitive + touch interface support. + * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete + PX30.Core C.TOUCH Carrier board. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200
board/engicam/px30_core/MAINTAINERS +6 -0
@@ -1,3 +1,9 @@ +PX30-Core-CTOUCH2.0 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: configs/px30-core-ctouch2-px30_defconfig + PX30-Core-EDIMM2.2 M: Jagan Teki <[email protected]> M: Suniel Mahesh <[email protected]>
configs/px30-core-ctouch2-px30_defconfig new file +108 -0
108 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH v4 7/8] rockchip: Add Engicam PX30.Core C.TOUCH 2.0
Quoted 5 lines · Jagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support.
Quoted 7 lines
PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by Jagan Teki <[email protected]>Signed-off-by Suniel Mahesh <[email protected]>
Thanks,
- Kever
Quoted 199 lines
---
Changes for v4:
- nonearch/arm/dts/Makefile | 1 + arch/arm/dts/px30-px30-core-ctouch2.dts | 22 +++++ arch/arm/mach-rockchip/px30/Kconfig | 7 ++ board/engicam/px30_core/MAINTAINERS | 6 ++ configs/px30-core-ctouch2-px30_defconfig | 108 +++++++++++++++++++++++ 5 files changed, 144 insertions(+)create mode 100644
arch/arm/dts/px30-px30-core-ctouch2.dtscreate mode 100644 configs/px30-core-ctouch2-px30_defconfigarch/arm/dts/Makefile +1
-0@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \ dtb-$(CONFIG_ROCKCHIP_PX30) += \ px30-evb.dtb \ px30-firefly.dtb \ + px30-px30-core-ctouch2.dtb \ px30-px30-core-edimm2.2.dtb \ rk3326-odroid-go2.dtbarch/arm/dts/px30-px30-core-ctouch2.dts new file +22
-0@@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-ctouch2.dtsi" +#include "px30-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core C.TOUCH 2.0"; + compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core", + "rockchip,px30"; + + chosen { + stdout-path = "serial2:115200n8"; + }; +};arch/arm/mach-rockchip/px30/Kconfig +7
-0@@ -20,6 +20,13 @@ config TARGET_PX30_CORE * PX30.Core needs to mount on top of EDIMM2.2 for creating complete PX30.Core EDIMM2.2 Starter Kit. + PX30.Core CTOUCH2: + * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. + * CTOUCH2.0 is a general purpose Carrier board with capacitive + touch interface support. + * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete + PX30.Core C.TOUCH Carrier board. + config ROCKCHIP_BOOT_MODE_REG default 0xff010200board/engicam/px30_core/MAINTAINERS +6
-0@@ -1,3 +1,9 @@ +PX30-Core-CTOUCH2.0 +M: Jagan Teki <[email protected]> +M: Suniel Mahesh <[email protected]> +S: Maintained +F: configs/px30-core-ctouch2-px30_defconfig + PX30-Core-EDIMM2.2 M: Jagan Teki <[email protected]> M: Suniel Mahesh <[email protected]>configs/px30-core-ctouch2-px30_defconfig new file +108
-0@@ -0,0 +1,108 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_ROCKCHIP_PX30=y +CONFIG_TARGET_PX30_CORE=y +CONFIG_DEBUG_UART_CHANNEL=1 +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_DEBUG_UART_BASE=0xFF160000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2" +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_CONSOLE_MUX is not set +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_STACK_R=y +# CONFIG_TPL_BANNER_PRINT is not set +CONFIG_SPL_CRC32_SUPPORT=y +CONFIG_SPL_ATF=y +# CONFIG_TPL_FRAMEWORK is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LZMADEC is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPT=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_FASTBOOT_BUF_SIZE=0x04000000 +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_OTP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_ROCKCHIP_SDRAM_COMMON=y +CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_SOUND=y +CONFIG_SYSRESET=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_LCD=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y
PATCH v4 8/8 doc: rockchip: Document Rockchip miniloader flashing
In reply to Jagan TekiThis would be useful and recommended boot flow for new boards which has doesn't have the DDR support yet in mainline.
Sometimes it is very useful for debugging mainline DDR support.
Documen it for px30 boot flow.
---
Changes for v4:
- none
doc/board/rockchip/rockchip.rst | 40 ++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-)
doc/board/rockchip/rockchip.rst +39 -1
@@ -123,6 +123,9 @@ To build rk3399 boards:: Flashing -------- +1. Package the image with U-Boot TPL/SPL +----------------------------------------- + SD Card ^^^^^^^
@@ -187,6 +190,39 @@ Copy SPI boot images into SD card and boot from SD:: sf erase 0x60000 +$filesize sf write $kernel_addr_r 0x60000 ${filesize} +2. Package the image with Rockchip miniloader +--------------------------------------------- + +Image package with Rockchip miniloader requires robin [1]. + +Create idbloader.img + +.. code-block:: none + + cd u-boot + ./tools/mkimage -n px30 -T rksd -d rkbin/bin/rk33/px30_ddr_333MHz_v1.15.bin idbloader.img + cat rkbin/bin/rk33/px30_miniloader_v1.22.bin >> idbloader.img + sudo dd if=idbloader.img of=/dev/sda seek=64 + +Create trust.img + +.. code-block:: none + + cd rkbin + ./tools/trust_merger RKTRUST/PX30TRUST.ini + sudo dd if=trust.img of=/dev/sda seek=24576 + +Create uboot.img + +.. code-block:: none + + rbink/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img 0x200000 + sudo dd if=uboot.img of=/dev/sda seek=16384 + +Note: +1. 0x200000 is load address and it's an optional in some platforms. +2. rkbin binaries are kept on updating, so would recommend to use the latest versions. + TODO ----
@@ -195,5 +231,7 @@ TODO - Document SPI flash boot - Add missing SoC's with it boards list +[1] https://github.com/rockchip-linux/rkbin + .. Jagan Teki <[email protected]> -.. Tuesday 02 June 2020 12:18:57 AM IST +.. Wednesday 28 October 2020 06:47:26 PM IST
Signature · 1 line
2.25.1
Re: [PATCH v4 8/8] doc: rockchip: Document Rockchip miniloader flashing
Quoted 8 lines · Jagan Teki
This would be useful and recommended boot flow for new boards which has doesn't have the DDR support yet in mainline.
Sometimes it is very useful for debugging mainline DDR support.
Documen it for px30 boot flow.
Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 70 lines
---
Changes for v4:
- nonedoc/board/rockchip/rockchip.rst | 40 ++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-)doc/board/rockchip/rockchip.rst +39
-1@@ -123,6 +123,9 @@ To build rk3399 boards:: Flashing -------- +1. Package the image with U-Boot TPL/SPL +----------------------------------------- + SD Card ^^^^^^^@@ -187,6 +190,39 @@ Copy SPI boot images into SD card and boot from SD:: sf erase 0x60000 +$filesize sf write $kernel_addr_r 0x60000 ${filesize} +2. Package the image with Rockchip miniloader +--------------------------------------------- + +Image package with Rockchip miniloader requires robin [1]. + +Create idbloader.img + +.. code-block:: none + + cd u-boot + ./tools/mkimage -n px30 -T rksd -d rkbin/bin/rk33/px30_ddr_333MHz_v1.15.bin idbloader.img + cat rkbin/bin/rk33/px30_miniloader_v1.22.bin >> idbloader.img + sudo dd if=idbloader.img of=/dev/sda seek=64 + +Create trust.img + +.. code-block:: none + + cd rkbin + ./tools/trust_merger RKTRUST/PX30TRUST.ini + sudo dd if=trust.img of=/dev/sda seek=24576 + +Create uboot.img + +.. code-block:: none + + rbink/tools/loaderimage --pack --uboot u-boot-dtb.bin uboot.img 0x200000 + sudo dd if=uboot.img of=/dev/sda seek=16384 + +Note: +1. 0x200000 is load address and it's an optional in some platforms. +2. rkbin binaries are kept on updating, so would recommend to use the latest versions. + TODO ----@@ -195,5 +231,7 @@ TODO - Document SPI flash boot - Add missing SoC's with it boards list +[1] https://github.com/rockchip-linux/rkbin + .. Jagan Teki <[email protected]> -.. Tuesday 02 June 2020 12:18:57 AM IST +.. Wednesday 28 October 2020 06:47:26 PM IST