ath11k: fix ZERO address in probe request
PATCH 1/1 ath11k: fix ZERO address in probe request
Host needs to pass at least on bssid with all 0xff to firmware in WMI_START_SCAN_CMDID, otherwise the bssid and receiver address in probe requeste are all ZEROs.
This also fixed some hidden AP connection issue because some AP doesn't respond to probe request which receiver address are all ZEROs.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
--- drivers/net/wireless/ath/ath11k/wmi.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/net/wireless/ath/ath11k/wmi.c +5 -0
@@ -1946,6 +1946,11 @@ void ath11k_wmi_start_scan_init(struct ath11k *ar,WMI_SCAN_EVENT_DEQUEUED ; arg->scan_flags |=WMI_SCAN_CHAN_STAT_EVENT ; arg->num_bssid =1 ; +/* fill bssid_list[0] with 0xff, otherwise +* bssid and RA will be ZEROs in probe request. +*/ +eth_broadcast_addr (arg->bssid_list[0 ].addr); + } static inline void
Signature · 1 line
2.28.0
Quoted 4 lines · Carl Huang
Host needs to pass at least on bssid with all
0xffto firmware inWMI_START_SCAN_CMDID, otherwise the bssid and receiver address in probe requeste are all ZEROs.
Quoted 8 lines
This also fixed some hidden AP connection issue because some AP doesn't respond to probe request which receiver address are all ZEROs.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by Carl Huang <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
fa7572c2cfe0 ath11k: fix ZERO address in probe request
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 4 lines · Carl Huang
Host needs to pass at least on bssid with all
0xffto firmware inWMI_START_SCAN_CMDID, otherwise the bssid and receiver address in probe requeste are all ZEROs.
Quoted 8 lines
This also fixed some hidden AP connection issue because some AP doesn't respond to probe request which receiver address are all ZEROs.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by Carl Huang <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
fa7572c2cfe0 ath11k: fix ZERO address in probe request
Signature · 9 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k