Skip to contentSkip to conversation

ARM: dts: stm32: Drop QSPI CS2 on DHCOM

PATCH New Marek Vasut 3 participants 4 messages Oct 28, 2020 – Nov 25, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: stm32: Drop QSPI CS2 on DHCOM

The QSPI CS2 is not used on DHCOM, remove the pinmux and flash at 1.

Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>
---
 arch/arm/dts/stm32mp15xx-dhcom.dtsi | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
arch/arm/dts/stm32mp15xx-dhcom.dtsi +2 -11
index 8782a3b78d..18c08c9435 100644
@@ -299,8 +299,8 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -314,15 +314,6 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
-
-	flash1: mx66l51235l at 1 {
-		compatible = "jedec,spi-nor";
-		reg = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
 };
 
 &rng1 {
Signature · 1 line
2.28.0
#1 lore raw

PATCH 1/1 ARM: dts: stm32: Drop QSPI CS2 on DHCOM

Hi Marek

Quoted 30 lines · Marek Vasut

The QSPI CS2 is not used on DHCOM, remove the pinmux and flash at 1.

Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>
---
 arch/arm/dts/stm32mp15xx-dhcom.dtsi | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
arch/arm/dts/stm32mp15xx-dhcom.dtsi +2 -4
index 8782a3b78d..18c08c9435 100644
@@ -299,8 +299,8 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -314,15 +314,6 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
-
-	flash1: mx66l51235l at 1 {

arch/arm/dts/stm32mp15xx-dhcom.dtsi line 319

Quoted 10 lines
arch/arm/dts/stm32mp15xx-dhcom.dtsi +0 -7
-		compatible = "jedec,spi-nor";
-		reg = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
 };
 
 &rng1 {

Thanks

Patrice

#2 lore raw

PATCH 1/1 ARM: dts: stm32: Drop QSPI CS2 on DHCOM

In reply to Marek Vasut

Hi Marek,

Quoted 8 lines

From: Marek Vasut <[email protected]>
Sent: mercredi 28 octobre 2020 21:38
To: u-boot at lists.denx.de
Cc: Marek Vasut <[email protected]>; Patrice CHOTARD <[email protected]>; Patrick DELAUNAY <[email protected]>
Subject: [PATCH] ARM: dts: stm32: Drop QSPI CS2 on DHCOM
Importance: High

Quoted 9 lines

The QSPI CS2 is not used on DHCOM, remove the pinmux and flash at 1.

Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>
---
 arch/arm/dts/stm32mp15xx-dhcom.dtsi | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

Thanks

Patrick

#3 lore raw

PATCH 1/1 ARM: dts: stm32: Drop QSPI CS2 on DHCOM

In reply to Marek Vasut

Hi Marek,

Quoted 12 lines

From: Marek Vasut <[email protected]>
Sent: mercredi 28 octobre 2020 21:38

The QSPI CS2 is not used on DHCOM, remove the pinmux and flash at 1.

Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>
---
 arch/arm/dts/stm32mp15xx-dhcom.dtsi | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

Applied to u-boot-stm/master, thanks!

Regards

Patrick