hw/char/cadence_uart: Fixed wrong Cadence UART stop bit count register value.
PATCH 1/1 hw/char/cadence_uart: Fixed wrong Cadence UART stop bit count register value.
Here is a reference showing that 0x00 is the correct value:
- https://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
(page 1776, Register XUARTPS_MR_OFFSET Details, which is for a platform
called Zynq that has a UART made by Cadence)
- https://github.com/Xilinx/linux-xlnx/blob/51445f9139af73c616f054a8fcc77ed2568b81b1/drivers/tty/serial/xilinx_uartps.c#L98
(Linux driver for the Cadence UART on that Zynq platform).
Signed-off-by Anthony Dentinger <[email protected]>
--- hw/char/cadence_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/char/cadence_uart.c +1 -1
@@ -93,7 +93,7 @@#define UART_DATA_BITS_7 (0x2 << UART_MR_CHRL_SH)#define UART_PARITY_ODD (0x1 << UART_MR_PAR_SH)#define UART_PARITY_EVEN (0x0 << UART_MR_PAR_SH) -#define UART_STOP_BITS_1 (0x3 << UART_MR_NBSTOP_SH) +#define UART_STOP_BITS_1 (0x0 << UART_MR_NBSTOP_SH)#define UART_STOP_BITS_2 (0x2 << UART_MR_NBSTOP_SH)#define NORMAL_MODE (0x0 << UART_MR_CHMODE_SH)#define ECHO_MODE (0x1 << UART_MR_CHMODE_SH)
Signature · 1 line
2.16.2.windows.1