arm64: dts: imx8mq-kontron-pitx-imx8m: pass phy reset delays
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mq-kontron-pitx-imx8m: pass phy reset delays
The TI DP83867 PHY datasheet says:
T1: Post RESET stabilization time == 195us
T3: Hardware configuration pins transition to output drivers == 64us
T4: RESET pulse width == 1us
So with a little overhead set 'reset-assert-us' to 10us (T4) and 'reset-deassert-us' to 280us (T1+T3).
Signed-off-by Heiko Thiery <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts +2 -0
@@ -90,6 +90,8 @@ ethphy0: ethernet-phy@0 { ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <280>; }; }; };
Signature · 1 line
2.30.0