Add support of Lontium lt8912 MIPI to HDMI bridge
Subsystems (5)
v9 cover Add support of Lontium lt8912 MIPI to HDMI bridge
Hi,
this patch set adds the support of the Lontium lt8912 MIPI to HDMI bridge in the kernel.
It's only support the video part, not the audio part yet since I don't have the datasheet of this component. I get the current i2c configuration from Digi and Boundary drivers.
Developed using the DB_DSIHD board from BoundaryDevices.
Update in v2
- Use standard data-lanes instead of a custom prop;
- Use hdmi-connector node.
Update in v3
- Fix indentation;
- Implement missing bridge functions;
- Add some comments.
Update in v4
- Fix bridge ops;
- Fix i2c error detection.
Update in v5
- Fix lt8912 name (lt8912b instead of lt8912);
- Implement HPD via a workaround. In fact I don't have the datasheet of this component yet so I can't say if the configuration of the
registers is correct or if I have an HW issue on my board. So, I choose to implement a fake version of HPD using a workqueue and polling the status regularly.
Update in v6
- Fix a warning found by "kernel test robot"
Update in v7
- Fix HPD logic (via an HW emulation);
- HPD from chip is still not working.
Update in v8
- Remove HPD logic (will be added later when HW bug qill be fixed).
Update in v9
- Fix errors found in scripts/checkpatch.pl --strict
Thanks,
Adrien Grassein (2):
dt-bindings: display: bridge: Add documentation for LT8912B drm/bridge: Introduce LT8912B DSI to HDMI bridge
.../display/bridge/lontium,lt8912b.yaml | 102 +++ MAINTAINERS | 6 + drivers/gpu/drm/bridge/Kconfig | 14 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt8912b.c | 765 ++++++++++++++++++ 5 files changed, 888 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml create mode 100644 drivers/gpu/drm/bridge/lontium-lt8912b.c
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v9 1/2 dt-bindings: display: bridge: Add documentation for LT8912B
Lontium LT8912B is a DSI to HDMI bridge.
--- .../display/bridge/lontium,lt8912b.yaml | 102 ++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml new file +102 -0
@@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912B MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <[email protected]> + +description: | + The LT8912B is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912b + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +...
MAINTAINERS +5 -0
@@ -10548,6 +10548,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912B MIPI TO HDMI BRIDGE +M: Adrien Grassein <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <[email protected]> M: Sreekanth Reddy <[email protected]>
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v9 2/2 drm/bridge: Introduce LT8912B DSI to HDMI bridge
In reply to Adrien GrasseinLontium LT8912B is a DSI to HDMI bridge.
--- MAINTAINERS | 1 + drivers/gpu/drm/bridge/Kconfig | 14 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt8912b.c | 765 +++++++++++++++++++++++ 4 files changed, 781 insertions(+) create mode 100644 drivers/gpu/drm/bridge/lontium-lt8912b.c
MAINTAINERS +1 -0
@@ -10552,6 +10552,7 @@ LONTIUM LT8912B MIPI TO HDMI BRIDGE M: Adrien Grassein <[email protected]> S: Maintained F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml +F: drivers/gpu/drm/bridge/lontium-lt8912b.c LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <[email protected]>
drivers/gpu/drm/bridge/Kconfig +14 -0
@@ -61,6 +61,20 @@ config DRM_DISPLAY_CONNECTOR on ARM-based platforms. Saying Y here when this driver is not needed will not cause any issue. +config DRM_LONTIUM_LT8912B + tristate "Lontium LT8912B DSI/HDMI bridge" + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select REGMAP_I2C + help + Driver for Lontium LT8912B DSI to HDMI bridge + chip driver. + Please say Y if you have such hardware. + + Say M here if you want to support this hardware as a module. + The module will be named "lontium-lt8912b". + config DRM_LONTIUM_LT9611 tristate "Lontium LT9611 DSI/HDMI bridge" select SND_SOC_HDMI_CODEC if SND_SOC
drivers/gpu/drm/bridge/Makefile +1 -0
@@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o +obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o obj-$(CONFIG_DRM_LONTIUM_LT9611UXC) += lontium-lt9611uxc.o obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
drivers/gpu/drm/bridge/lontium-lt8912b.c new file +765 -0
765 lines not on this page · raw message
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Pushed: https://cgit.freedesktop.org/drm/drm-misc/commit/?id=3aa6031deefa9a2c056af2182af02d3dc5df1067
Quoted 60 lines · Adrien Grassein
Hi,
this patch set adds the support of the Lontium lt8912 MIPI to HDMI bridge in the kernel.It's only support the video part, not the audio part yet since I don't have the datasheet of this component. I get the current i2c configuration from Digi and Boundary drivers.
Developed using theDB_DSIHDboard from BoundaryDevices.Update in v2
- Use standard data-lanes instead of a custom prop;
- Use hdmi-connector node.Update in v3
- Fix indentation;
- Implement missing bridge functions;
- Add some comments.Update in v4
- Fix bridge ops;
- Fix i2c error detection.Update in v5
- Fix lt8912 name (lt8912b instead of lt8912);
- Implement HPD via a workaround. In fact I don't have the datasheet of this component yet so I can't say if the configuration of the
registers is correct or if I have an HW issue on my board. So, I choose to implement a fake version of HPD using a workqueue and polling the status regularly.Update in v6
- Fix a warning found by "kernel test robot"Update in v7
- Fix HPD logic (via an HW emulation);
- HPD from chip is still not working.Update in v8
- Remove HPD logic (will be added later when HW bug qill be fixed).Update in v9
- Fix errors found inscripts/checkpatch.pl--strictThanks,
Adrien Grassein (2):
dt-bindings: display: bridge: Add documentation for LT8912B drm/bridge: Introduce LT8912B DSI to HDMI bridge.../display/bridge/lontium,lt8912b.yaml | 102 +++ MAINTAINERS | 6 + drivers/gpu/drm/bridge/Kconfig | 14 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt8912b.c | 765 ++++++++++++++++++ 5 files changed, 888 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml create mode 100644 drivers/gpu/drm/bridge/lontium-lt8912b.c
Quoted 3 lines
--
2.25.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel