Skip to contentSkip to conversation

arm64: dts: ipq8074: add crypto nodes

PATCH New Robert Marko 1 participant 2 messages May 18, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 arm64: dts: ipq8074: add crypto nodes

IPQ8074 uses Qualcom QCE crypto engine v5.1
which is already supported.

So simply add nodes for its DMA and QCE itself.

---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm64/boot/dts/qcom/ipq8074.dtsi +24 -0
index 829e37ac82f6..194930374bc5 100644
@@ -197,6 +197,30 @@ pcie_phy1: phy@8e000 {
 			status = "disabled";
 		};
 
+		cryptobam: dma@704000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely = <1>;
+			status = "disabled";
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq8074-pinctrl";
 			reg = <0x01000000 0x300000>;
Signature · 1 line
2.31.1
#1 lore raw

PATCH 2/2 arm64: dts: ipq8074: add PRNG node

PRNG insinde of IPQ8074 is already supported,
so simply add the node for it.

---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/qcom/ipq8074.dtsi +8 -0
index 194930374bc5..aec7ced72a89 100644
@@ -197,6 +197,14 @@ pcie_phy1: phy@8e000 {
 			status = "disabled";
 		};
 
+		prng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
 		cryptobam: dma@704000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x00704000 0x20000>;
Signature · 1 line
2.31.1