Skip to contentSkip to conversation

dt-bindings: connector: Replace BIT macro with generic bit ops

PATCH Superseded Kyle Tso 2 participants 3 messages May 27, 2021

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Kyle Tso

author
#0 lore raw

PATCH 1/1 dt-bindings: connector: Replace BIT macro with generic bit ops

BIT macro is not supported in dt-bindings. Replace it with generic bit operations.

Fixes 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
---
 include/dt-bindings/usb/pd.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
include/dt-bindings/usb/pd.h +10 -10
index fef3ef65967f..cb70b4ceedde 100644
@@ -163,10 +163,10 @@
 #define UFP_VDO_VER1_2		2
 
 /* Device Capability */
-#define DEV_USB2_CAPABLE	BIT(0)
-#define DEV_USB2_BILLBOARD	BIT(1)
-#define DEV_USB3_CAPABLE	BIT(2)
-#define DEV_USB4_CAPABLE	BIT(3)
+#define DEV_USB2_CAPABLE	(1 << 0)
+#define DEV_USB2_BILLBOARD	(1 << 1)
+#define DEV_USB3_CAPABLE	(1 << 2)
+#define DEV_USB4_CAPABLE	(1 << 3)
 
 /* Connector Type */
 #define UFP_RECEPTACLE		2
@@ -191,9 +191,9 @@
 
 /* Alternate Modes */
 #define UFP_ALTMODE_NOT_SUPP	0
-#define UFP_ALTMODE_TBT3	BIT(0)
-#define UFP_ALTMODE_RECFG	BIT(1)
-#define UFP_ALTMODE_NO_RECFG	BIT(2)
+#define UFP_ALTMODE_TBT3	(1 << 0)
+#define UFP_ALTMODE_RECFG	(1 << 1)
+#define UFP_ALTMODE_NO_RECFG	(1 << 2)
 
 /* USB Highest Speed */
 #define UFP_USB2_ONLY		0
@@ -217,9 +217,9 @@
  * <4:0>   :: Port number
  */
 #define DFP_VDO_VER1_1		1
-#define HOST_USB2_CAPABLE	BIT(0)
-#define HOST_USB3_CAPABLE	BIT(1)
-#define HOST_USB4_CAPABLE	BIT(2)
+#define HOST_USB2_CAPABLE	(1 << 0)
+#define HOST_USB3_CAPABLE	(1 << 1)
+#define HOST_USB4_CAPABLE	(1 << 2)
 #define DFP_RECEPTACLE		2
 #define DFP_CAPTIVE		3
 
Signature · 1 line
2.31.1.818.g46aad6cb9e-goog
maintainer
#1 lore raw
Quoted 2 lines · Kyle Tso

BIT macro is not supported in dt-bindings. Replace it with generic bit operations.

Why isn't the BIT macro supported there? How are we going to "remember" that I should not take patches that use this #define in that location?

thanks,

greg k-h

author
#2 lore raw
Quoted 7 lines · Greg KH
Quoted 2 lines · Kyle Tso

BIT macro is not supported in dt-bindings. Replace it with generic bit operations.

Why isn't the BIT macro supported there? How are we going to "remember" that I should not take patches that use this #define in that location?

I rephrased the commit message in v2

thanks,
Kyle

Quoted 4 lines

thanks,

greg k-h