KVM: x86: Clean up RESET "emulation"
Sean Christopherson
maintainercover KVM: x86: Clean up RESET "emulation"
Add dedicated helpers to emulate RESET instead of having the relevant code scattered through vcpu_create() and vcpu_reset(). Paolo, I think this is what you meant by "have init_vmcb/svm_vcpu_reset look more like the VMX code"[*].
Patch 01 is a bit odd; it's essentially an explicit acknowledgement that KVM's emulation is far from complete. It caught my eye when auditing the "create" flows to ensure they didn't touch guest state, which should be handled by "reset". I waffled between deleting it outright and moving it to the new __vmx_vcpu_reset(), and opted to delete outright to discourage ad hoc clearing of MSRs during RESET, which isn't a maintainable approach.
[*] https://lore.kernel.org/all/[email protected]/
Sean Christopherson (3):
KVM: VMX: Drop explicit zeroing of MSR guest values at vCPU creation
KVM: VMX: Move RESET emulation to vmx_vcpu_reset()
KVM: SVM: Move RESET emulation to svm_vcpu_reset()
arch/x86/kvm/svm/sev.c | 6 ++-- arch/x86/kvm/svm/svm.c | 29 ++++++++++-------- arch/x86/kvm/svm/svm.h | 2 +- arch/x86/kvm/vmx/vmx.c | 67 ++++++++++++++++++++---------------------- 4 files changed, 53 insertions(+), 51 deletions(-)
Signature · 1 line
2.33.0.309.g3052b89438-goog
Sean Christopherson
maintainerPATCH 1/3 KVM: VMX: Drop explicit zeroing of MSR guest values at vCPU creation
Don't zero out user return and nested MSRs during vCPU creation, and instead rely on vcpu_vmx being zero-allocated. Explicitly zeroing MSRs is not wrong, and is in fact necessary if KVM ever emulates vCPU RESET outside of vCPU creation, but zeroing only a subset of MSRs is confusing.
Poking directly into KVM's backing is also undesirable in that it doesn't scale and is error prone. Ideally KVM would have a common RESET path for all MSRs, e.g. by expanding kvm_set_msr(), which would obviate the need for this out-of-bad code (to support standalone RESET).
No functional change intended.
--- arch/x86/kvm/vmx/vmx.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
arch/x86/kvm/vmx/vmx.c +1 -5
@@ -6818,10 +6818,8 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) goto free_vpid; } -for (i =0 ; i < kvm_nr_uret_msrs; ++i) { - vmx->guest_uret_msrs[i].data =0 ; +for (i =0 ; i < kvm_nr_uret_msrs; ++i) vmx->guest_uret_msrs[i].mask =-1ull ; - }if (boot_cpu_has (X86_FEATURE_RTM )) {/* * TSX_CTRL_CPUID_CLEAR is handled in the CPUID interception.
@@ -6878,8 +6876,6 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu)if (nested)memcpy (&vmx->nested.msrs, &vmcs_config.nested,sizeof (vmx->nested.msrs)); -else -memset (&vmx->nested.msrs,0 ,sizeof (vmx->nested.msrs));vcpu_setup_sgx_lepubkeyhash (vcpu);
Signature · 1 line
2.33.0.309.g3052b89438-goog
Sean Christopherson
maintainerPATCH 2/3 KVM: VMX: Move RESET emulation to vmx_vcpu_reset()
In reply to Sean ChristophersonMove vCPU RESET emulation, including initializating of select VMCS state, to vmx_vcpu_reset(). Drop the open coded "vCPU load" sequence, as ->vcpu_reset() is invoked while the vCPU is properly loaded (which is kind of the point of ->vcpu_reset()...). Hopefully KVM will someday expose a dedicated RESET ioctl(), and in the meantime separating "create" from "RESET" is a nice cleanup.
Deferring VMCS initialization is effectively a nop as it's impossible to safely access the VMCS between the current call site and its new home, as both the vCPU and the pCPU are put immediately after init_vmcs(), i.e. the VMCS isn't guaranteed to be loaded.
Note, task preemption is not a problem as vmx_sched_in() _can't_ touch the VMCS as ->sched_in() is invoked before the vCPU, and thus VMCS, is reloaded. I.e. the preemption path also can't consume VMCS state.
--- arch/x86/kvm/vmx/vmx.c | 61 +++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 30 deletions(-)
arch/x86/kvm/vmx/vmx.c +31 -30
@@ -4327,10 +4327,6 @@ static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)#define VMX_XSS_EXIT_BITMAP 0 -/* -* Noting that the initialization of Guest-state Area of VMCS is in -* vmx_vcpu_reset(). -*/ static void init_vmcs (struct vcpu_vmx *vmx) {if (nested)
@@ -4435,10 +4431,39 @@ static void init_vmcs(struct vcpu_vmx *vmx)vmx_setup_uret_msrs (vmx); } +static void __vmx_vcpu_reset (struct kvm_vcpu *vcpu) +{ +struct vcpu_vmx *vmx =to_vmx (vcpu); + +init_vmcs (vmx); + +if (nested) +memcpy (&vmx->nested.msrs, &vmcs_config.nested,sizeof (vmx->nested.msrs)); + +vcpu_setup_sgx_lepubkeyhash (vcpu); + + vmx->nested.posted_intr_nv =-1 ; + vmx->nested.current_vmptr =-1ull ; + vmx->nested.hv_evmcs_vmptr =EVMPTR_INVALID ; + + vcpu->arch.microcode_version =0x100000000ULL ; + vmx->msr_ia32_feature_control_valid_bits =FEAT_CTL_LOCKED ; + +/* +* Enforce invariant: pi_desc.nv is always either POSTED_INTR_VECTOR +* or POSTED_INTR_WAKEUP_VECTOR. +*/ + vmx->pi_desc.nv =POSTED_INTR_VECTOR ; + vmx->pi_desc.sn =1 ; +} +static void vmx_vcpu_reset (struct kvm_vcpu *vcpu,bool init_event) {struct vcpu_vmx *vmx =to_vmx (vcpu); +if (!init_event) +__vmx_vcpu_reset (vcpu); + vmx->rmode.vm86_active =0 ; vmx->spec_ctrl =0 ;
@@ -6797,7 +6822,7 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) {struct vmx_uret_msr *tsx_ctrl;struct vcpu_vmx *vmx; -int i, cpu, err; +int i, err;BUILD_BUG_ON (offsetof(struct vcpu_vmx , vcpu) !=0 ); vmx =to_vmx (vcpu);
@@ -6856,12 +6881,7 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) } vmx->loaded_vmcs = &vmx->vmcs01; - cpu =get_cpu (); -vmx_vcpu_load (vcpu, cpu); - vcpu->cpu = cpu; -init_vmcs (vmx); -vmx_vcpu_put (vcpu); -put_cpu (); +if (cpu_need_virtualize_apic_accesses (vcpu)) { err =alloc_apic_access_page (vcpu->kvm);if (err)
@@ -6874,25 +6894,6 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) goto free_vmcs; } -if (nested) -memcpy (&vmx->nested.msrs, &vmcs_config.nested,sizeof (vmx->nested.msrs)); - -vcpu_setup_sgx_lepubkeyhash (vcpu); - - vmx->nested.posted_intr_nv =-1 ; - vmx->nested.current_vmptr =-1ull ; - vmx->nested.hv_evmcs_vmptr =EVMPTR_INVALID ; - - vcpu->arch.microcode_version =0x100000000ULL ; - vmx->msr_ia32_feature_control_valid_bits =FEAT_CTL_LOCKED ; - -/* -* Enforce invariant: pi_desc.nv is always either POSTED_INTR_VECTOR -* or POSTED_INTR_WAKEUP_VECTOR. -*/ - vmx->pi_desc.nv =POSTED_INTR_VECTOR ; - vmx->pi_desc.sn =1 ; -return 0 ; free_vmcs:
Signature · 1 line
2.33.0.309.g3052b89438-goog
Re: [PATCH 2/3] KVM: VMX: Move RESET emulation to vmx_vcpu_reset()
Quoted 45 lines · Sean Christopherson
Move vCPU RESET emulation, including initializating of select VMCS state, to
vmx_vcpu_reset(). Drop the open coded "vCPU load" sequence, as ->vcpu_reset() is invoked while the vCPU is properly loaded (which is kind of the point of ->vcpu_reset()...). Hopefully KVM will someday expose a dedicated RESETioctl(), and in the meantime separating "create" from "RESET" is a nice cleanup.Deferring VMCS initialization is effectively a nop as it's impossible to safely access the VMCS between the current call site and its new home, as both the vCPU and the pCPU are put immediately after
init_vmcs(), i.e. the VMCS isn't guaranteed to be loaded.Note, task preemption is not a problem as
vmx_sched_in()_can't_ touch the VMCS as ->sched_in() is invoked before the vCPU, and thus VMCS, is reloaded. I.e. the preemption path also can't consume VMCS state.Cc Reiji Watanabe <[email protected]>Signed-off-by Sean Christopherson <[email protected]>--- arch/x86/kvm/vmx/vmx.c | 61 +++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 30 deletions(-)arch/x86/kvm/vmx/vmx.c +4
-4@@ -4327,10 +4327,6 @@ static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)#define VMX_XSS_EXIT_BITMAP 0 -/* -* Noting that the initialization of Guest-state Area of VMCS is in -* vmx_vcpu_reset(). -*/ static void init_vmcs (struct vcpu_vmx *vmx) {if (nested)@@ -4435,10 +4431,39 @@ static void init_vmcs(struct vcpu_vmx *vmx)vmx_setup_uret_msrs (vmx); } +static void __vmx_vcpu_reset (struct kvm_vcpu *vcpu) +{ +struct vcpu_vmx *vmx =to_vmx (vcpu); +
arch/x86/kvm/vmx/vmx.c static void init_vmcs(struct vcpu_vmx *vmx) · line 4447
Quoted 10 lines
arch/x86/kvm/vmx/vmx.c +10
-0+init_vmcs (vmx); + +if (nested) +memcpy (&vmx->nested.msrs, &vmcs_config.nested,sizeof (vmx->nested.msrs)); + +vcpu_setup_sgx_lepubkeyhash (vcpu); + + vmx->nested.posted_intr_nv =-1 ; + vmx->nested.current_vmptr =-1ull ; + vmx->nested.hv_evmcs_vmptr =EVMPTR_INVALID ;
What would happen in (hypothetical) case when enlightened VMCS is currently in use? If we zap 'hv_evmcs_vmptr' here, the consequent nested_release_evmcs() (called from nested_vmx_handle_enlightened_vmptrld(), for example) will not do kvm_vcpu_unmap() while it should.
This, however, got me thinking: should we free all-things-nested with free_nested()/nested_vmx_free_vcpu() upon vcpu reset? I can't seem to find us doing that... (I do remember that INIT is blocked in VMX-root mode and nobody else besides kvm_arch_vcpu_create()/ kvm_apic_accept_events() seems to call kvm_vcpu_reset()) but maybe we should at least add a WARN_ON() guardian here?
Side topic: we don't seem to reset Hyper-V specific MSRs either, probably relying on userspace VMM doing the right thing but this is also not ideal I believe.
Quoted 71 lines
arch/x86/kvm/vmx/vmx.c +17
-26+ + vcpu->arch.microcode_version =0x100000000ULL ; + vmx->msr_ia32_feature_control_valid_bits =FEAT_CTL_LOCKED ; + +/* +* Enforce invariant: pi_desc.nv is always either POSTED_INTR_VECTOR +* or POSTED_INTR_WAKEUP_VECTOR. +*/ + vmx->pi_desc.nv =POSTED_INTR_VECTOR ; + vmx->pi_desc.sn =1 ; +} +static void vmx_vcpu_reset (struct kvm_vcpu *vcpu,bool init_event) {struct vcpu_vmx *vmx =to_vmx (vcpu); +if (!init_event) +__vmx_vcpu_reset (vcpu); + vmx->rmode.vm86_active =0 ; vmx->spec_ctrl =0 ;@@ -6797,7 +6822,7 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) {struct vmx_uret_msr *tsx_ctrl;struct vcpu_vmx *vmx; -int i, cpu, err; +int i, err;BUILD_BUG_ON (offsetof(struct vcpu_vmx , vcpu) !=0 ); vmx =to_vmx (vcpu);@@ -6856,12 +6881,7 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) } vmx->loaded_vmcs = &vmx->vmcs01; - cpu =get_cpu (); -vmx_vcpu_load (vcpu, cpu); - vcpu->cpu = cpu; -init_vmcs (vmx); -vmx_vcpu_put (vcpu); -put_cpu (); +if (cpu_need_virtualize_apic_accesses (vcpu)) { err =alloc_apic_access_page (vcpu->kvm);if (err)@@ -6874,25 +6894,6 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu) goto free_vmcs; } -if (nested) -memcpy (&vmx->nested.msrs, &vmcs_config.nested,sizeof (vmx->nested.msrs)); - -vcpu_setup_sgx_lepubkeyhash (vcpu); - - vmx->nested.posted_intr_nv =-1 ; - vmx->nested.current_vmptr =-1ull ; - vmx->nested.hv_evmcs_vmptr =EVMPTR_INVALID ; - - vcpu->arch.microcode_version =0x100000000ULL ; - vmx->msr_ia32_feature_control_valid_bits =FEAT_CTL_LOCKED ; - -/* -* Enforce invariant: pi_desc.nv is always either POSTED_INTR_VECTOR -* or POSTED_INTR_WAKEUP_VECTOR. -*/ - vmx->pi_desc.nv =POSTED_INTR_VECTOR ; - vmx->pi_desc.sn =1 ; -return 0 ; free_vmcs:
Signature · 1 line
Vitaly
Sean Christopherson
maintainerRe: [PATCH 2/3] KVM: VMX: Move RESET emulation to vmx_vcpu_reset()
Quoted 13 lines · Vitaly Kuznetsov
Quoted 12 lines · Sean Christopherson
(quoted diff) +12
-0+static void __vmx_vcpu_reset(struct kvm_vcpu *vcpu) +{ + struct vcpu_vmx *vmx = to_vmx(vcpu); + + init_vmcs(vmx); + + if (nested) + memcpy(&vmx->nested.msrs, &vmcs_config.nested, sizeof(vmx->nested.msrs)); + + vcpu_setup_sgx_lepubkeyhash(vcpu); + + vmx->nested.posted_intr_nv = -1;
Quoted 8 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ vmx->nested.current_vmptr = -1ull; + vmx->nested.hv_evmcs_vmptr = EVMPTR_INVALID;What would happen in (hypothetical) case when enlightened VMCS is currently in use? If we zap '
hv_evmcs_vmptr' here, the consequentnested_release_evmcs()(called fromnested_vmx_handle_enlightened_vmptrld(), for example) will not dokvm_vcpu_unmap()while it should.
The short answer is that there's a lot of stuff that needs to be addressed before KVM can expose a RESET ioctl(). My goal with these patches is to carve out the stubs and move the few bits of RESET emulation into the "stubs". This is the same answer for the MSR question/comment at the end.
Quoted 6 lines
This, however, got me thinking: should we free all-things-nested with free_nested()/nested_vmx_free_vcpu() upon vcpu reset? I can't seem to find us doing that... (I do remember that INIT is blocked in VMX-root mode and nobody else besides kvm_arch_vcpu_create()/
kvm_apic_accept_events()seems to callkvm_vcpu_reset()) but maybe we should at least add aWARN_ON()guardian here?
I think that makes sense. Maybe use CR0 as a sentinel since it has a non-zero RESET value? E.g. WARN if CR0 is non-zero at RESET.
arch/x86/kvm/x86.c +5 -0
@@ -10813,6 +10813,11 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)unsigned long new_cr0;u32 eax, dummy; +/* +* <comment about KVM not supporting arbitrary RESET> +*/ +WARN_ON_ONCE (!init_event && old_cr0); +kvm_lapic_reset (vcpu, init_event); vcpu->arch.hflags =0 ;
Huh, typing that out made me realize commit 0aa1837533e5 ("KVM: x86: Properly reset MMU context at vCPU RESET/INIT") technically introduced a bug. kvm_vcpu_reset() does kvm_read_cr0() and thus reads vmcs.GUEST_CR0 because vcpu->arch.regs_avail is (correctly) not stuffed to ALL_ONES until later in kvm_vcpu_reset(). init_vmcs() doesn't explicitly zero vmcs.GUEST_CR0 (along with many other guest fields), and so VMREAD(GUEST_CR0) is technically consuming garbage. In practice, it's consuming '0' because no known CPU or VMM inverts values in the VMCS, i.e. zero allocating the VMCS is functionally equivalent to writing '0' to all fields via VMWRITE.
And staring more at kvm_vcpu_reset(), this code is terrifying for INIT
memset(vcpu->arch.regs, 0, sizeof(vcpu->arch.regs)); vcpu->arch.regs_avail = ~0; vcpu->arch.regs_dirty = ~0;
because it means cr0 and cr4 are marked available+dirty without immediately writing vcpu->arch.cr0/cr4. And VMX subtly relies on that, as vmx_set_cr0() grabs CR0.PG via kvm_read_cr0_bits(), i.e. zeroing vcpu->arch.cr0 would "break" the INIT flow. Ignoring for the moment that CR0.PG is never guest-owned and thus never stale in vcpu->arch.cr0, KVM is also technically relying on the earlier kvm_read_cr0() in kvm_vcpu_reset() to ensure vcpu->arch.cr0 is fresh.
Stuffing regs_avail technically means vmx_set_rflags() -> vmx_get_rflags() is consuming stale data. It doesn't matter in practice because the old value is only used to re-evaluate vmx->emulation_required, which is guaranteed to be up refreshed by vmx_set_cr0() and friends. PDPTRs and EXIT_INFO are in a similar boat; KVM shouldn't be reading those fields (CR0.PG=0, not an exit path), but marking them dirty without actually updating the cached values is wrong.
There's also one concrete bug: KVM doesn't set vcpu->arch.cr3=0 on RESET/INIT. That bug has gone unnoticed because no real word BIOS/kernel is going to rely on INIT to set CR3=0.
I'm strongly leaning towards stuffing regs_avail/dirty in kvm_arch_vcpu_create(), and relying on explicit kvm_register_mark_dirty() calls for the 3 or so cases where x86 code writes a vcpu->arch register directly. That would fix the CR0 read bug and also prevent subtle bugs from sneaking in. Adding new EXREGS would be slightly more costly, but IMO that's a good thing as would force us to actually think about how to handle each register.
E.g. implement this over 2-3 patches:
arch/x86/kvm/vmx/vmx.c +1 -0
@@ -4385,6 +4385,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)kvm_set_cr8 (vcpu,0 );vmx_segment_cache_clear (vmx); +kvm_register_mark_available (vcpu,VCPU_EXREG_SEGMENTS );seg_setup (VCPU_SREG_CS );vmcs_write16 (GUEST_CS_SELECTOR ,0xf000 );
arch/x86/kvm/x86.c +7 -2
@@ -10656,6 +10656,8 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)int r; vcpu->arch.last_vmentry_cpu =-1 ; + vcpu->arch.regs_avail = ~0 ; + vcpu->arch.regs_dirty = ~0 ;if (!irqchip_in_kernel (vcpu->kvm) ||kvm_vcpu_is_reset_bsp (vcpu)) vcpu->arch.mp_state =KVM_MP_STATE_RUNNABLE ;
@@ -10874,9 +10876,9 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) vcpu->arch.xcr0 =XFEATURE_MASK_FP ; } +/* All GPRs except RDX (handled below) are zeroed on RESET/INIT. */ memset (vcpu->arch.regs,0 ,sizeof (vcpu->arch.regs)); - vcpu->arch.regs_avail = ~0 ; - vcpu->arch.regs_dirty = ~0 ; +kvm_register_mark_dirty (vcpu,VCPU_REGS_RSP );/* * Fall back to KVM's default Family/Model/Stepping of 0x600 (P6/Athlon)
@@ -10897,6 +10899,9 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)kvm_set_rflags (vcpu,X86_EFLAGS_FIXED );kvm_rip_write (vcpu,0xfff0 ); + vcpu->arch.cr3 =0 ; +kvm_register_mark_dirty (vcpu,VCPU_EXREG_CR3 ); +/* * CR0.CD/NW are set on RESET, preserved on INIT. Note, some versions * of Intel's SDM list CD/NW as being set on INIT, but they contradict
Quoted 3 lines
Side topic: we don't seem to reset Hyper-V specific MSRs either, probably relying on userspace VMM doing the right thing but this is also not ideal I believe.
Re: [PATCH 2/3] KVM: VMX: Move RESET emulation to vmx_vcpu_reset()
Quoted 45 lines · Sean Christopherson
Quoted 13 lines · Vitaly Kuznetsov
Quoted 12 lines · Sean Christopherson
(quoted diff) +12
-0+static void __vmx_vcpu_reset(struct kvm_vcpu *vcpu) +{ + struct vcpu_vmx *vmx = to_vmx(vcpu); + + init_vmcs(vmx); + + if (nested) + memcpy(&vmx->nested.msrs, &vmcs_config.nested, sizeof(vmx->nested.msrs)); + + vcpu_setup_sgx_lepubkeyhash(vcpu); + + vmx->nested.posted_intr_nv = -1;Quoted 8 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ vmx->nested.current_vmptr = -1ull; + vmx->nested.hv_evmcs_vmptr = EVMPTR_INVALID;What would happen in (hypothetical) case when enlightened VMCS is currently in use? If we zap '
hv_evmcs_vmptr' here, the consequentnested_release_evmcs()(called fromnested_vmx_handle_enlightened_vmptrld(), for example) will not dokvm_vcpu_unmap()while it should.The short answer is that there's a lot of stuff that needs to be addressed before KVM can expose a RESET
ioctl(). My goal with these patches is to carve out the stubs and move the few bits of RESET emulation into the "stubs". This is the same answer for the MSR question/comment at the end.Quoted 6 lines
This, however, got me thinking: should we free all-things-nested with free_nested()/nested_vmx_free_vcpu() upon vcpu reset? I can't seem to find us doing that... (I do remember that INIT is blocked in VMX-root mode and nobody else besides kvm_arch_vcpu_create()/
kvm_apic_accept_events()seems to callkvm_vcpu_reset()) but maybe we should at least add aWARN_ON()guardian here?I think that makes sense. Maybe use CR0 as a sentinel since it has a non-zero RESET value? E.g. WARN if CR0 is non-zero at RESET.
arch/x86/kvm/x86.c +0
-0@@ -10813,6 +10813,11 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)unsigned long new_cr0;
arch/x86/kvm/x86.c void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) · line 10823
Quoted 10 lines
arch/x86/kvm/x86.c +5
-0u32 eax, dummy; +/* +* <comment about KVM not supporting arbitrary RESET> +*/ +WARN_ON_ONCE (!init_event && old_cr0); +kvm_lapic_reset (vcpu, init_event); vcpu->arch.hflags =0 ;
Should work (assuming nothing in VMX would want to call vmx_vcpu_reset()/ __vmx_vcpu_reset() directly).
Quoted 81 lines
Huh, typing that out made me realize commit
0aa1837533e5("KVM: x86: Properly reset MMU context at vCPU RESET/INIT") technically introduced a bug.kvm_vcpu_reset()doeskvm_read_cr0()and thus reads vmcs.GUEST_CR0 becausevcpu->arch.regs_availis (correctly) not stuffed toALL_ONESuntil later inkvm_vcpu_reset().init_vmcs()doesn't explicitly zero vmcs.GUEST_CR0 (along with many other guest fields), and soVMREAD(GUEST_CR0)is technically consuming garbage. In practice, it's consuming '0' because no known CPU or VMM inverts values in the VMCS, i.e. zero allocating the VMCS is functionally equivalent to writing '0' to all fields via VMWRITE.And staring more at
kvm_vcpu_reset(), this code is terrifying for INITmemset(vcpu->arch.regs, 0, sizeof(vcpu->arch.regs)); vcpu->arch.regs_avail = ~0; vcpu->arch.regs_dirty = ~0;because it means cr0 and cr4 are marked available+dirty without immediately writing vcpu->arch.cr0/cr4. And VMX subtly relies on that, as
vmx_set_cr0()grabs CR0.PG viakvm_read_cr0_bits(), i.e. zeroingvcpu->arch.cr0would "break" the INIT flow. Ignoring for the moment that CR0.PG is never guest-owned and thus never stale invcpu->arch.cr0, KVM is also technically relying on the earlierkvm_read_cr0()inkvm_vcpu_reset()to ensurevcpu->arch.cr0is fresh.Stuffing
regs_availtechnically meansvmx_set_rflags()->vmx_get_rflags()is consuming stale data. It doesn't matter in practice because the old value is only used to re-evaluatevmx->emulation_required, which is guaranteed to be up refreshed byvmx_set_cr0()and friends. PDPTRs andEXIT_INFOare in a similar boat; KVM shouldn't be reading those fields (CR0.PG=0, not an exit path), but marking them dirty without actually updating the cached values is wrong.There's also one concrete bug: KVM doesn't set vcpu->arch.cr3=0 on RESET/INIT. That bug has gone unnoticed because no real word BIOS/kernel is going to rely on INIT to set CR3=0.
I'm strongly leaning towards stuffing regs_avail/dirty in
kvm_arch_vcpu_create(), and relying on explicitkvm_register_mark_dirty()calls for the 3 or so cases where x86 code writes avcpu->archregister directly. That would fix the CR0 read bug and also prevent subtle bugs from sneaking in. Adding new EXREGS would be slightly more costly, but IMO that's a good thing as would force us to actually think about how to handle each register.E.g. implement this over 2-3 patches:
arch/x86/kvm/vmx/vmx.c +1
-0@@ -4385,6 +4385,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)kvm_set_cr8 (vcpu,0 );vmx_segment_cache_clear (vmx); +kvm_register_mark_available (vcpu,VCPU_EXREG_SEGMENTS );seg_setup (VCPU_SREG_CS );vmcs_write16 (GUEST_CS_SELECTOR ,0xf000 );arch/x86/kvm/x86.c +4
-2@@ -10656,6 +10656,8 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)int r; vcpu->arch.last_vmentry_cpu =-1 ; + vcpu->arch.regs_avail = ~0 ; + vcpu->arch.regs_dirty = ~0 ;if (!irqchip_in_kernel (vcpu->kvm) ||kvm_vcpu_is_reset_bsp (vcpu)) vcpu->arch.mp_state =KVM_MP_STATE_RUNNABLE ;@@ -10874,9 +10876,9 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) vcpu->arch.xcr0 =XFEATURE_MASK_FP ; } +/* All GPRs except RDX (handled below) are zeroed on RESET/INIT. */ memset (vcpu->arch.regs,0 ,sizeof (vcpu->arch.regs)); - vcpu->arch.regs_avail = ~0 ; - vcpu->arch.regs_dirty = ~0 ; +kvm_register_mark_dirty (vcpu,VCPU_REGS_RSP );/* * Fall back to KVM's default Family/Model/Stepping of 0x600 (P6/Athlon)
arch/x86/kvm/x86.c void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) · line 10907
Quoted 9 lines
arch/x86/kvm/x86.c +3
-0@@ -10897,6 +10899,9 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)kvm_set_rflags (vcpu,X86_EFLAGS_FIXED );kvm_rip_write (vcpu,0xfff0 ); + vcpu->arch.cr3 =0 ; +kvm_register_mark_dirty (vcpu,VCPU_EXREG_CR3 ); +/* * CR0.CD/NW are set on RESET, preserved on INIT. Note, some versions * of Intel's SDM list CD/NW as being set on INIT, but they contradict
A selftest for vCPU create/reset would be really helpful. I can even volunteer to [eventually] write one :-)
Signature · 1 line
Vitaly
Sean Christopherson
maintainerRe: [PATCH 2/3] KVM: VMX: Move RESET emulation to vmx_vcpu_reset()
Quoted 5 lines · Vitaly Kuznetsov
Quoted 4 lines · Sean Christopherson
arch/x86/kvm/x86.c +0
-0@@ -10897,6 +10899,9 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)kvm_set_rflags (vcpu,X86_EFLAGS_FIXED );kvm_rip_write (vcpu,0xfff0 );
Quoted 10 lines
arch/x86/kvm/x86.c void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) · line 10907
Quoted 7 lines
arch/x86/kvm/x86.c +3
-0+ vcpu->arch.cr3 =0 ; +kvm_register_mark_dirty (vcpu,VCPU_EXREG_CR3 ); +/* * CR0.CD/NW are set on RESET, preserved on INIT. Note, some versions * of Intel's SDM list CD/NW as being set on INIT, but they contradict A selftest for vCPU create/reset would be really helpful. I can even volunteer to [eventually] write one :-)
Hmm, I wonder if it would be possible to share code/infrastructure with Erdem's in-progress TDX selftest framework[*]. TDX forces vCPUs to start at the legacy reset vector with paging disabled, so it needs a lot of the same glue code as a from-RESET test would need. TDX forces 32-bit PM instead of RM, but it should be easy enough to allow an optional opening sequence to get into 32-bit PM.
We could also test INIT without much trouble since INIT to the BSP will send it back to the reset vector, e.g. set a flag somewhere to avoid an infinite loop and INIT self.
Let me work with Erdem to see if we can concoct something that will work for both TDX and tests that want to take control at RESET.
Sean Christopherson
maintainerPATCH 3/3 KVM: SVM: Move RESET emulation to svm_vcpu_reset()
In reply to Sean ChristophersonMove RESET emulation for SVM vCPUs to svm_vcpu_reset(), and drop an extra init_vmcb() from svm_create_vcpu() in the process. Hopefully KVM will someday expose a dedicated RESET ioctl(), and in the meantime separating "create" from "RESET" is a nice cleanup.
Keep the call to svm_switch_vmcb() so that misuse of svm->vmcb at worst breaks the guest, e.g. premature accesses doesn't cause a NULL pointer dereference.
--- arch/x86/kvm/svm/sev.c | 6 +++--- arch/x86/kvm/svm/svm.c | 29 +++++++++++++++++------------ arch/x86/kvm/svm/svm.h | 2 +- 3 files changed, 21 insertions(+), 16 deletions(-)
arch/x86/kvm/svm/sev.c +3 -3
@@ -2599,11 +2599,11 @@ void sev_es_init_vmcb(struct vcpu_svm *svm)set_msr_interception (vcpu, svm->msrpm,MSR_IA32_LASTINTTOIP ,1 ,1 ); } -void sev_es_create_vcpu (struct vcpu_svm *svm) +void sev_es_vcpu_reset (struct vcpu_svm *svm) {/* -* Set the GHCB MSR value as per the GHCB specification when creating -* a vCPU for an SEV-ES guest. +* Set the GHCB MSR value as per the GHCB specification when emulating +* vCPU RESET for an SEV-ES guest. */ set_ghcb_msr(svm, GHCB_MSR_SEV_INFO(GHCB_VERSION_MAX, GHCB_VERSION_MIN,
arch/x86/kvm/svm/svm.c +17 -12
@@ -1303,6 +1303,19 @@ static void init_vmcb(struct kvm_vcpu *vcpu) } +static void __svm_vcpu_reset (struct kvm_vcpu *vcpu) +{ +struct vcpu_svm *svm =to_svm (vcpu); + +svm_vcpu_init_msrpm (vcpu, svm->msrpm); + +svm_init_osvw (vcpu); + vcpu->arch.microcode_version =0x01000065 ; + +if (sev_es_guest (vcpu->kvm)) +sev_es_vcpu_reset (svm); +} +static void svm_vcpu_reset (struct kvm_vcpu *vcpu,bool init_event) {struct vcpu_svm *svm =to_svm (vcpu);
@@ -1311,6 +1324,9 @@ static void svm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) svm->virt_spec_ctrl =0 ;init_vmcb (vcpu); + +if (!init_event) +__svm_vcpu_reset (vcpu); }void svm_switch_vmcb (struct vcpu_svm *svm,struct kvm_vmcb_info *target_vmcb)
@@ -1370,24 +1386,13 @@ static int svm_create_vcpu(struct kvm_vcpu *vcpu) svm->vmcb01.ptr =page_address (vmcb01_page); svm->vmcb01.pa =__sme_set (page_to_pfn (vmcb01_page) <<PAGE_SHIFT ); +svm_switch_vmcb (svm, &svm->vmcb01);if (vmsa_page) svm->vmsa =page_address (vmsa_page); svm->guest_state_loaded = false; -svm_switch_vmcb (svm, &svm->vmcb01); -init_vmcb (vcpu); - -svm_vcpu_init_msrpm (vcpu, svm->msrpm); - -svm_init_osvw (vcpu); - vcpu->arch.microcode_version =0x01000065 ; - -if (sev_es_guest (vcpu->kvm)) -/* Perform SEV-ES specific VMCB creation updates */ -sev_es_create_vcpu (svm); -return 0 ; error_free_vmsa_page:
arch/x86/kvm/svm/svm.h +1 -1
@@ -561,7 +561,7 @@ void sev_free_vcpu(struct kvm_vcpu *vcpu);int sev_handle_vmgexit (struct kvm_vcpu *vcpu);int sev_es_string_io (struct vcpu_svm *svm,int size,unsigned int port,int in);void sev_es_init_vmcb (struct vcpu_svm *svm); -void sev_es_create_vcpu (struct vcpu_svm *svm); +void sev_es_vcpu_reset (struct vcpu_svm *svm);void sev_vcpu_deliver_sipi_vector (struct kvm_vcpu *vcpu,u8 vector);void sev_es_prepare_guest_switch (struct vcpu_svm *svm,unsigned int cpu);void sev_es_unmap_ghcb (struct vcpu_svm *svm);
Signature · 1 line
2.33.0.309.g3052b89438-goog
Paolo Bonzini
maintainerQuoted 6 lines · Sean Christopherson
Add dedicated helpers to emulate RESET instead of having the relevant code scattered through
vcpu_create()andvcpu_reset(). Paolo, I think this is what you meant by "have init_vmcb/svm_vcpu_reset look more like the VMX code"[*].
That assumes that I remember what I meant :) but I do like it so yes, that was it. Especially the fact that init_vmcb now has a single caller. I would further consider moving save area initialization to *_vcpu_reset, and keeping the control fields in init_vmcb/vmcs. That would make it easier to relate the two functions to separate parts of the manuals.
I should go back to KVM next week. Context switching with KVM Forum and Kangrejos this week made everything so much slower than I'd liked.
Paolo
Sean Christopherson
maintainerQuoted 9 lines · Paolo Bonzini
Quoted 6 lines · Sean Christopherson
Add dedicated helpers to emulate RESET instead of having the relevant code scattered through
vcpu_create()andvcpu_reset(). Paolo, I think this is what you meant by "have init_vmcb/svm_vcpu_reset look more like the VMX code"[*].That assumes that I remember what I meant :)
Ha! That's why I write changelogs with --verbose :-)
Quoted 4 lines
but I do like it so yes, that was it. Especially the fact that
init_vmcbnow has a single caller. I would further consider moving save area initialization to*_vcpu_reset, and keeping the control fields in init_vmcb/vmcs. That would make it easier to relate the two functions to separate parts of the manuals.
I like the idea, but I think I'd prefer to tackle that at the same time as generic support for handling MSRs at RESET/INIT. E.g. instead of manually writing vmcs.GUEST_SYSENTER_* at RESET, provide infrastruture to automagically run through all emulated/virtualized at RESET and/or INIT as appropriate to initialize the guest value.
Paolo Bonzini
maintainerQuoted 7 lines · Sean Christopherson
Quoted 4 lines
but I do like it so yes, that was it. Especially the fact that
init_vmcbnow has a single caller. I would further consider moving save area initialization to*_vcpu_reset, and keeping the control fields in init_vmcb/vmcs. That would make it easier to relate the two functions to separate parts of the manuals.I like the idea, but I think I'd prefer to tackle that at the same time as generic support for handling MSRs at RESET/INIT.
No problem, just roughly sketching some ideas for the future. But you're absolutely right that some MSRs have effects on the control areas rather than the save area (and some have effects on neither).
Thanks,
Paolo
Quoted 5 lines
E.g. instead of manually writing
vmcs.GUEST_SYSENTER_* at RESET, provide infrastruture to automagically run through all emulated/virtualized at RESET and/or INIT as appropriate to initialize the guest value.