arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio
Subsystems (2)
PATCH v2 1/1 arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio
As described in the Odroid-n2 & Odroid-n2-plus schematics, the 5V regulator is controlled by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
Fixes c35f6dc5c377 ("arm64: dts: meson: Add minimal support for Odroid-N2")
Fixes ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Cc Neil Armstrong <[email protected]>
Acked-by Neil Armstrong <[email protected]>
Signed-off-by Anand Moon <[email protected]>
---
V1- Added missing Fix tags and update the Neil's Ack
--- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +2 -0
@@ -99,6 +99,8 @@ vcc_5v: regulator-vcc_5v { regulator-max-microvolt = <5000000>; regulator-always-on; vin-supply = <&main_12v>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; }; vcc_1v8: regulator-vcc_1v8 {
Signature · 7 lines
2.33.0 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Neil Armstrong
AppliedHi,
Quoted 6 lines · Anand Moon
As described in the Odroid-n2 & Odroid-n2-plus schematics, the 5V regulator is controlled by
GPIOH_8and in Open Drain since this GPIO doesn't support Push-Pull.Fixes c35f6dc5c377 ("arm64: dts: meson: Add minimal support for Odroid-N2")Fixes ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.16/dt64)
[1/1] arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio
https://git.kernel.org/amlogic/c/ecff7bab5c9c2e2b6f5739b328347e08415879ec
Signature · 1 line
Neil