4.14.248-rc1 review

From: Ilya Leoshkevich <[email protected]>

commit db7bee653859ef7179be933e7d1384644f795f26 upstream.

Currently the JIT completely removes things like reg32 += 0, however, the BPF_ALU semantics requires the target register to be zero-extended in such cases.

Fix by optimizing out only the arithmetic operation, but not the subsequent zero-extension.

---
 arch/s390/net/bpf_jit_comp.c |   50 ++++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 24 deletions(-)

@@ -592,10 +592,10 @@ static noinline int bpf_jit_insn(struct
 		EMIT4(0xb9080000, dst_reg, src_reg);
 		break;
 	case BPF_ALU | BPF_ADD | BPF_K: /* dst = (u32) dst + (u32) imm */
-		if (!imm)
-			break;
-		/* alfi %dst,imm */
-		EMIT6_IMM(0xc20b0000, dst_reg, imm);
+		if (imm != 0) {
+			/* alfi %dst,imm */
+			EMIT6_IMM(0xc20b0000, dst_reg, imm);
+		}
 		EMIT_ZERO(dst_reg);
 		break;
 	case BPF_ALU64 | BPF_ADD | BPF_K: /* dst = dst + imm */

@@ -617,10 +617,10 @@ static noinline int bpf_jit_insn(struct
 		EMIT4(0xb9090000, dst_reg, src_reg);
 		break;
 	case BPF_ALU | BPF_SUB | BPF_K: /* dst = (u32) dst - (u32) imm */
-		if (!imm)
-			break;
-		/* alfi %dst,-imm */
-		EMIT6_IMM(0xc20b0000, dst_reg, -imm);
+		if (imm != 0) {
+			/* alfi %dst,-imm */
+			EMIT6_IMM(0xc20b0000, dst_reg, -imm);
+		}
 		EMIT_ZERO(dst_reg);
 		break;
 	case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */

@@ -647,10 +647,10 @@ static noinline int bpf_jit_insn(struct
 		EMIT4(0xb90c0000, dst_reg, src_reg);
 		break;
 	case BPF_ALU | BPF_MUL | BPF_K: /* dst = (u32) dst * (u32) imm */
-		if (imm == 1)
-			break;
-		/* msfi %r5,imm */
-		EMIT6_IMM(0xc2010000, dst_reg, imm);
+		if (imm != 1) {
+			/* msfi %r5,imm */
+			EMIT6_IMM(0xc2010000, dst_reg, imm);
+		}
 		EMIT_ZERO(dst_reg);
 		break;
 	case BPF_ALU64 | BPF_MUL | BPF_K: /* dst = dst * imm */

@@ -711,6 +711,8 @@ static noinline int bpf_jit_insn(struct
 			if (BPF_OP(insn->code) == BPF_MOD)
 				/* lhgi %dst,0 */
 				EMIT4_IMM(0xa7090000, dst_reg, 0);
+			else
+				EMIT_ZERO(dst_reg);
 			break;
 		}
 		/* lhi %w0,0 */

@@ -803,10 +805,10 @@ static noinline int bpf_jit_insn(struct
 		EMIT4(0xb9820000, dst_reg, src_reg);
 		break;
 	case BPF_ALU | BPF_XOR | BPF_K: /* dst = (u32) dst ^ (u32) imm */
-		if (!imm)
-			break;
-		/* xilf %dst,imm */
-		EMIT6_IMM(0xc0070000, dst_reg, imm);
+		if (imm != 0) {
+			/* xilf %dst,imm */
+			EMIT6_IMM(0xc0070000, dst_reg, imm);
+		}
 		EMIT_ZERO(dst_reg);
 		break;
 	case BPF_ALU64 | BPF_XOR | BPF_K: /* dst = dst ^ imm */

@@ -827,10 +829,10 @@ static noinline int bpf_jit_insn(struct
 		EMIT6_DISP_LH(0xeb000000, 0x000d, dst_reg, dst_reg, src_reg, 0);
 		break;
 	case BPF_ALU | BPF_LSH | BPF_K: /* dst = (u32) dst << (u32) imm */
-		if (imm == 0)
-			break;
-		/* sll %dst,imm(%r0) */
-		EMIT4_DISP(0x89000000, dst_reg, REG_0, imm);
+		if (imm != 0) {
+			/* sll %dst,imm(%r0) */
+			EMIT4_DISP(0x89000000, dst_reg, REG_0, imm);
+		}
 		EMIT_ZERO(dst_reg);
 		break;
 	case BPF_ALU64 | BPF_LSH | BPF_K: /* dst = dst << imm */

@@ -852,10 +854,10 @@ static noinline int bpf_jit_insn(struct
 		EMIT6_DISP_LH(0xeb000000, 0x000c, dst_reg, dst_reg, src_reg, 0);
 		break;
 	case BPF_ALU | BPF_RSH | BPF_K: /* dst = (u32) dst >> (u32) imm */
-		if (imm == 0)
-			break;
-		/* srl %dst,imm(%r0) */
-		EMIT4_DISP(0x88000000, dst_reg, REG_0, imm);
+		if (imm != 0) {
+			/* srl %dst,imm(%r0) */
+			EMIT4_DISP(0x88000000, dst_reg, REG_0, imm);
+		}
 		EMIT_ZERO(dst_reg);
 		break;
 	case BPF_ALU64 | BPF_RSH | BPF_K: /* dst = dst >> imm */

This is the start of the stable review cycle for the 4.14.248 release. There are 27 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 26 Sep 2021 12:43:20 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.248-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.248-rc1

Guenter Roeck <[email protected]>
drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

Li Jinlin <[email protected]>
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

Uwe Kleine-König <[email protected]>
pwm: rockchip: Don't modify HW state in .remove() callback

Nanyong Sun <[email protected]>
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group

Nanyong Sun <[email protected]>
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group

Nanyong Sun <[email protected]>
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group

Nanyong Sun <[email protected]>
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group

Nanyong Sun <[email protected]>
nilfs2: fix NULL pointer in nilfs_##name##_attr_release

Nanyong Sun <[email protected]>
nilfs2: fix memory leak in nilfs_sysfs_create_device_group

Jeff Layton <[email protected]>
ceph: lockdep annotations for try_nonblocking_invalidate

Radhey Shyam Pandey <[email protected]>
dmaengine: xilinx_dma: Set DMA mask for coherent APIs

Johannes Berg <[email protected]>
dmaengine: ioat: depends on !UML

Guenter Roeck <[email protected]>
parisc: Move pci_dev_is_behind_card_dino to where it is used

Lukas Bulwahn <[email protected]>
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH

Uwe Kleine-König <[email protected]>
pwm: mxs: Don't modify HW state in .probe() after the PWM chip was registered

Uwe Kleine-König <[email protected]>
pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered

Pavel Skripkin <[email protected]>
profiling: fix shift-out-of-bounds bugs

Cyrill Gorcunov <[email protected]>
prctl: allow to setup brk for et_dyn executables

Xie Yongji <[email protected]>
9p/trans_virtio: Remove sysfs file on probe failure

Dan Carpenter <[email protected]>
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()

Andy Shevchenko <[email protected]>
dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

Marcelo Ricardo Leitner <[email protected]>
sctp: add param size validation for SCTP_PARAM_SET_PRIMARY

Marcelo Ricardo Leitner <[email protected]>
sctp: validate chunk size in __rcv_asconf_lookup

Christophe Leroy <[email protected]>
crypto: talitos - fix max key size for sha384 and sha512

Andy Shevchenko <[email protected]>
apparmor: remove duplicate macro list_entry_is_head()

Neeraj Upadhyay <[email protected]>
rcu: Fix missed wakeup of exp_wq waiters

Ilya Leoshkevich <[email protected]>
s390/bpf: Fix optimizing out zero-extensions

-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/s390/net/bpf_jit_comp.c                      | 50 ++++++++++++-----------
 block/blk-throttle.c                              |  1 +
 drivers/crypto/talitos.c                          |  2 +-
 drivers/dma/Kconfig                               |  2 +-
 drivers/dma/acpi-dma.c                            | 10 +++--
 drivers/dma/xilinx/xilinx_dma.c                   |  2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c |  2 +-
 drivers/parisc/dino.c                             | 18 ++++----
 drivers/pwm/pwm-lpc32xx.c                         | 10 ++---
 drivers/pwm/pwm-mxs.c                             | 13 +++---
 drivers/pwm/pwm-rockchip.c                        | 14 -------
 drivers/thermal/samsung/exynos_tmu.c              |  1 +
 fs/ceph/caps.c                                    |  2 +
 fs/nilfs2/sysfs.c                                 | 26 +++++-------
 kernel/profile.c                                  | 21 +++++-----
 kernel/rcu/tree_exp.h                             |  2 +-
 kernel/sys.c                                      |  7 ----
 lib/Kconfig.debug                                 |  1 -
 net/9p/trans_virtio.c                             |  4 +-
 net/sctp/input.c                                  |  3 ++
 net/sctp/sm_make_chunk.c                          | 13 ++++--
 security/apparmor/apparmorfs.c                    |  3 --
 23 files changed, 101 insertions(+), 110 deletions(-)

From: Neeraj Upadhyay <[email protected]>

commit fd6bc19d7676a060a171d1cf3dcbf6fd797eb05f upstream.

Tasks waiting within exp_funnel_lock() for an expedited grace period to elapse can be starved due to the following sequence of events:

1. Tasks A and B both attempt to start an expedited grace
period at about the same time. This grace period will have
completed when the lower four bits of the rcu_state structure's ->expedited_sequence field are 0b'0100', for example, when the
initial value of this counter is zero. Task A wins, and thus
does the actual work of starting the grace period, including acquiring the rcu_state structure's .exp_mutex and sets the counter to 0b'0001'.

2. Because task B lost the race to start the grace period, it

	waits on ->expedited_sequence to reach 0b'0100' inside of
	exp_funnel_lock(). This task therefore blocks on the rcu_node
	structure's ->exp_wq[1] field, keeping in mind that the
	end-of-grace-period value of ->expedited_sequence (0b'0100')
	is shifted down two bits before indexing the ->exp_wq[] field.

3. Task C attempts to start another expedited grace period,

	but blocks on ->exp_mutex, which is still held by Task A.

4. The aforementioned expedited grace period completes, so that

	->expedited_sequence now has the value 0b'0100'.  A kworker task
	therefore acquires the rcu_state structure's ->exp_wake_mutex
	and starts awakening any tasks waiting for this grace period.

5. One of the first tasks awakened happens to be Task A. Task A

	therefore releases the rcu_state structure's ->exp_mutex,
	which allows Task C to start the next expedited grace period,
	which causes the lower four bits of the rcu_state structure's
	->expedited_sequence field to become 0b'0101'.

6. Task C's expedited grace period completes, so that the lower four

	bits of the rcu_state structure's ->expedited_sequence field now
	become 0b'1000'.

7. The kworker task from step 4 above continues its wakeups.

	Unfortunately, the wake_up_all() refetches the rcu_state
	structure's .expedited_sequence field:

	wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rcu_state.expedited_sequence) & 0x3]);

	This results in the wakeup being applied to the rcu_node
	structure's ->exp_wq[2] field, which is unfortunate given that
	Task B is instead waiting on ->exp_wq[1].

On a busy system, no harm is done (or at least no permanent harm is done). Some later expedited grace period will redo the wakeup. But on a quiet system, such as many embedded systems, it might be a good long time before there was another expedited grace period. On such embedded systems, this situation could therefore result in a system hang.

This issue manifested as DPM device timeout during suspend (which usually qualifies as a quiet time) due to a SCSI device being stuck in _synchronize_rcu_expedited(), with the following stack trace:

	schedule()
	synchronize_rcu_expedited()
	synchronize_rcu()
	scsi_device_quiesce()
	scsi_bus_suspend()
	dpm_run_callback()
	__device_suspend()

This commit therefore prevents such delays, timeouts, and hangs by making rcu_exp_wait_wake() use its "s" argument consistently instead of refetching from rcu_state.expedited_sequence.

---
 kernel/rcu/tree_exp.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -534,7 +534,7 @@ static void rcu_exp_wait_wake(struct rcu
 			spin_unlock(&rnp->exp_lock);
 		}
 		smp_mb(); /* All above changes before wakeup. */
-		wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rsp->expedited_sequence) & 0x3]);
+		wake_up_all(&rnp->exp_wq[rcu_seq_ctr(s) & 0x3]);
 	}
 	trace_rcu_exp_grace_period(rsp->name, s, TPS("endwake"));
 	mutex_unlock(&rsp->exp_wake_mutex);

From: Andy Shevchenko <[email protected]>

commit 9801ca279ad37f72f71234fa81722afd95a3f997 upstream.

Strangely I hadn't had noticed the existence of the list_entry_is_head() in apparmor code when added the same one in the list.h. Luckily it's fully identical and didn't break builds. In any case we don't need a duplicate anymore, thus remove it from apparmor code.

---
 security/apparmor/apparmorfs.c |    3 ---
 1 file changed, 3 deletions(-)

@@ -1900,9 +1900,6 @@ fail2:
 	return error;
 }
 
-
-#define list_entry_is_head(pos, head, member) (&pos->member == (head))
-
 /**
  * __next_ns - find the next namespace to list
  * @root: root namespace to stop search at (NOT NULL)

From: Marcelo Ricardo Leitner <[email protected]>

commit b6ffe7671b24689c09faa5675dd58f93758a97ae upstream.

In one of the fallbacks that SCTP has for identifying an association for an incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek. Thing is, at this stage nothing was validating that the chunk actually had enough content for that, allowing the peek to happen over uninitialized memory.

Similar check already exists in actual asconf handling in sctp_verify_asconf().

---
 net/sctp/input.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -1118,6 +1118,9 @@ static struct sctp_association *__sctp_r
 	union sctp_addr_param *param;
 	union sctp_addr paddr;
 
+	if (ntohs(ch->length) < sizeof(*asconf) + sizeof(struct sctp_paramhdr))
+		return NULL;
+
 	/* Skip over the ADDIP header and find the Address parameter */
 	param = (union sctp_addr_param *)(asconf + 1);
 

From: Lukas Bulwahn <[email protected]>

[ Upstream commit 6fe26259b4884b657cbc233fb9cdade9d704976e ]

Commit 05a4a9527931 ("kernel/watchdog: split up config options") adds a new config HARDLOCKUP_DETECTOR, which selects the non-existing config HARDLOCKUP_DETECTOR_ARCH.

Hence, ./scripts/checkkconfigsymbols.py warns:

HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug

Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH.

---
 lib/Kconfig.debug | 1 -
 1 file changed, 1 deletion(-)

index e1df563cdfe7..428eaf16a1d2 100644
@@ -816,7 +816,6 @@ config HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select LOCKUP_DETECTOR
 	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF
-	select HARDLOCKUP_DETECTOR_ARCH if HAVE_HARDLOCKUP_DETECTOR_ARCH
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
 	  hard lockups.

2.33.0

From: Guenter Roeck <[email protected]>

[ Upstream commit 907872baa9f1538eed02ec737b8e89eba6c6e4b9 ]

parisc build test images fail to compile with the following error.

drivers/parisc/dino.c:160:12: error:
'pci_dev_is_behind_card_dino' defined but not used

Move the function just ahead of its only caller to avoid the error.

---
 drivers/parisc/dino.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

index 8bed46630857..c11515bdac83 100644
@@ -160,15 +160,6 @@ struct dino_device
 	(struct dino_device *)__pdata; })
 
 
-/* Check if PCI device is behind a Card-mode Dino. */
-static int pci_dev_is_behind_card_dino(struct pci_dev *dev)
-{
-	struct dino_device *dino_dev;
-
-	dino_dev = DINO_DEV(parisc_walk_tree(dev->bus->bridge));
-	return is_card_dino(&dino_dev->hba.dev->id);
-}
-
 /*
  * Dino Configuration Space Accessor Functions
  */

@@ -452,6 +443,15 @@ static void quirk_cirrus_cardbus(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6832, quirk_cirrus_cardbus );
 
 #ifdef CONFIG_TULIP
+/* Check if PCI device is behind a Card-mode Dino. */
+static int pci_dev_is_behind_card_dino(struct pci_dev *dev)
+{
+	struct dino_device *dino_dev;
+
+	dino_dev = DINO_DEV(parisc_walk_tree(dev->bus->bridge));
+	return is_card_dino(&dino_dev->hba.dev->id);
+}
+
 static void pci_fixup_tulip(struct pci_dev *dev)
 {
 	if (!pci_dev_is_behind_card_dino(dev))

2.33.0

From: Johannes Berg <[email protected]>

[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ]

Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um.

---
 drivers/dma/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index ff69feefc1c6..5ea37d133f24 100644
@@ -262,7 +262,7 @@ config INTEL_IDMA64
 
 config INTEL_IOATDMA
 	tristate "Intel I/OAT DMA support"
-	depends on PCI && X86_64
+	depends on PCI && X86_64 && !UML
 	select DMA_ENGINE
 	select DMA_ENGINE_RAID
 	select DCA

2.33.0

From: Radhey Shyam Pandey <[email protected]>

[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ]

The xilinx dma driver uses the consistent allocations, so for correct operation also set the DMA mask for coherent APIs. It fixes the below kernel crash with dmatest client when DMA IP is configured with 64-bit address width and linux is booted from high (>4GB) memory.

Call trace:
[  489.531257]  dma_alloc_from_pool+0x8c/0x1c0
[  489.535431]  dma_direct_alloc+0x284/0x330
[  489.539432]  dma_alloc_attrs+0x80/0xf0
[  489.543174]  dma_pool_alloc+0x160/0x2c0
[  489.547003]  xilinx_cdma_prep_memcpy+0xa4/0x180
[  489.551524]  dmatest_func+0x3cc/0x114c
[  489.555266]  kthread+0x124/0x130
[  489.558486]  ret_from_fork+0x10/0x3c
[  489.562051] ---[ end trace 248625b2d596a90a ]---

---
 drivers/dma/xilinx/xilinx_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 21203e3a54fd..3c2084766a31 100644
@@ -2585,7 +2585,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;
 
 	/* Set the dma mask bits */
-	dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
+	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
 
 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;

2.33.0

From: Jeff Layton <[email protected]>

[ Upstream commit 3eaf5aa1cfa8c97c72f5824e2e9263d6cc977b03 ]

---
 fs/ceph/caps.c | 2 ++
 1 file changed, 2 insertions(+)

index b077b9a6bf95..a0168d9bb85d 100644
@@ -1657,6 +1657,8 @@ static int __mark_caps_flushing(struct inode *inode,
  * try to invalidate mapping pages without blocking.
  */
 static int try_nonblocking_invalidate(struct inode *inode)
+	__releases(ci->i_ceph_lock)
+	__acquires(ci->i_ceph_lock)
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	u32 invalidating_gen = ci->i_rdcache_gen;

2.33.0

From: Nanyong Sun <[email protected]>

[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ]

Patch series "nilfs2: fix incorrect usage of kobject".

This patchset from Nanyong Sun fixes memory leak issues and a NULL pointer dereference issue caused by incorrect usage of kboject in nilfs2 sysfs implementation.

This patch (of 6):

Reported by syzkaller:

  BUG: memory leak
  unreferenced object 0xffff888100ca8988 (size 8):
  comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s)
  hex dump (first 8 bytes):
  6c 6f 6f 70 31 00 ff ff loop1...
  backtrace:
    kstrdup+0x36/0x70 mm/util.c:60
    kstrdup_const+0x35/0x60 mm/util.c:83
    kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48
    kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
    kobject_add_varg lib/kobject.c:384 [inline]
    kobject_init_and_add+0xc9/0x150 lib/kobject.c:473
    nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986
    init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637
    nilfs_fill_super fs/nilfs2/super.c:1046 [inline]
    nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316
    legacy_get_tree+0x105/0x210 fs/fs_context.c:592
    vfs_get_tree+0x8e/0x2d0 fs/super.c:1498
    do_new_mount fs/namespace.c:2905 [inline]
    path_mount+0xf9b/0x1990 fs/namespace.c:3235
    do_mount+0xea/0x100 fs/namespace.c:3248
    __do_sys_mount fs/namespace.c:3456 [inline]
    __se_sys_mount fs/namespace.c:3433 [inline]
    __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

If kobject_init_and_add return with error, then the cleanup of kobject is needed because memory may be allocated in kobject_init_and_add without freeing.

And the place of cleanup_dev_kobject should use kobject_put to free the memory associated with the kobject. As the section "Kobject removal" of "Documentation/core-api/kobject.rst" says, kobject_del() just makes the kobject "invisible", but it is not cleaned up. And no more cleanup will do after cleanup_dev_kobject, so kobject_put is needed here.

---
 fs/nilfs2/sysfs.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

index e9903bceb2bf..a35978bf8395 100644
@@ -1010,7 +1010,7 @@ int nilfs_sysfs_create_device_group(struct super_block *sb)
 	err = kobject_init_and_add(&nilfs->ns_dev_kobj, &nilfs_dev_ktype, NULL,
 				    "%s", sb->s_id);
 	if (err)
-		goto free_dev_subgroups;
+		goto cleanup_dev_kobject;
 
 	err = nilfs_sysfs_create_mounted_snapshots_group(nilfs);
 	if (err)

@@ -1047,9 +1047,7 @@ delete_mounted_snapshots_group:
 	nilfs_sysfs_delete_mounted_snapshots_group(nilfs);
 
 cleanup_dev_kobject:
-	kobject_del(&nilfs->ns_dev_kobj);
-
-free_dev_subgroups:
+	kobject_put(&nilfs->ns_dev_kobj);
 	kfree(nilfs->ns_dev_subgroups);
 
 failed_create_device_group:

2.33.0

From: Nanyong Sun <[email protected]>

[ Upstream commit dbc6e7d44a514f231a64d9d5676e001b660b6448 ]

In nilfs_##name##_attr_release, kobj->parent should not be referenced because it is a NULL pointer. The release() method of kobject is always called in kobject_put(kobj), in the implementation of kobject_put(), the kobj->parent will be assigned as NULL before call the release() method. So just use kobj to get the subgroups, which is more efficient and can fix a NULL pointer reference problem.

---
 fs/nilfs2/sysfs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

index a35978bf8395..027a50bc0765 100644
@@ -73,11 +73,9 @@ static const struct sysfs_ops nilfs_##name##_attr_ops = { \
 #define NILFS_DEV_INT_GROUP_TYPE(name, parent_name) \
 static void nilfs_##name##_attr_release(struct kobject *kobj) \
 { \
-	struct nilfs_sysfs_##parent_name##_subgroups *subgroups; \
-	struct the_nilfs *nilfs = container_of(kobj->parent, \
-						struct the_nilfs, \
-						ns_##parent_name##_kobj); \
-	subgroups = nilfs->ns_##parent_name##_subgroups; \
+	struct nilfs_sysfs_##parent_name##_subgroups *subgroups = container_of(kobj, \
+						struct nilfs_sysfs_##parent_name##_subgroups, \
+						sg_##name##_kobj); \
 	complete(&subgroups->sg_##name##_kobj_unregister); \
 } \
 static struct kobj_type nilfs_##name##_ktype = { \

2.33.0

From: Nanyong Sun <[email protected]>

[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ]

If kobject_init_and_add return with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated.

---
 fs/nilfs2/sysfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 027a50bc0765..eab7bd68da12 100644
@@ -101,8 +101,8 @@ static int nilfs_sysfs_create_##name##_group(struct the_nilfs *nilfs) \
 	err = kobject_init_and_add(kobj, &nilfs_##name##_ktype, parent, \
 				    #name); \
 	if (err) \
-		return err; \
-	return 0; \
+		kobject_put(kobj); \
+	return err; \
 } \
 static void nilfs_sysfs_delete_##name##_group(struct the_nilfs *nilfs) \
 { \

2.33.0

From: Nanyong Sun <[email protected]>

[ Upstream commit a3e181259ddd61fd378390977a1e4e2316853afa ]

The kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del. See the section "Kobject removal" of "Documentation/core-api/kobject.rst".

---
 fs/nilfs2/sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index eab7bd68da12..31eed118d0ce 100644
@@ -106,7 +106,7 @@ static int nilfs_sysfs_create_##name##_group(struct the_nilfs *nilfs) \
 } \
 static void nilfs_sysfs_delete_##name##_group(struct the_nilfs *nilfs) \
 { \
-	kobject_del(&nilfs->ns_##parent_name##_subgroups->sg_##name##_kobj); \
+	kobject_put(&nilfs->ns_##parent_name##_subgroups->sg_##name##_kobj); \
 }
 
 /************************************************************************

2.33.0

From: Nanyong Sun <[email protected]>

[ Upstream commit 17243e1c3072b8417a5ebfc53065d0a87af7ca77 ]

kobject_put() should be used to cleanup the memory associated with the kobject instead of kobject_del(). See the section "Kobject removal" of "Documentation/core-api/kobject.rst".

---
 fs/nilfs2/sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 28f5572c6aae..33fba75aa9f3 100644
@@ -224,7 +224,7 @@ int nilfs_sysfs_create_snapshot_group(struct nilfs_root *root)
 
 void nilfs_sysfs_delete_snapshot_group(struct nilfs_root *root)
 {
-	kobject_del(&root->snapshot_kobj);
+	kobject_put(&root->snapshot_kobj);
 }
 
 /************************************************************************

2.33.0

From: Marcelo Ricardo Leitner <[email protected]>

commit ef6c8d6ccf0c1dccdda092ebe8782777cd7803c9 upstream.

When SCTP handles an INIT chunk, it calls for example:
sctp_sf_do_5_1B_init
sctp_verify_init
sctp_verify_param
sctp_process_init
sctp_process_param
handling of SCTP_PARAM_SET_PRIMARY

sctp_verify_init() wasn't doing proper size validation and neither the later handling, allowing it to work over the chunk itself, possibly being uninitialized memory.

---
 net/sctp/sm_make_chunk.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

@@ -2161,9 +2161,16 @@ static enum sctp_ierror sctp_verify_para
 		break;
 
 	case SCTP_PARAM_SET_PRIMARY:
-		if (net->sctp.addip_enable)
-			break;
-		goto fallthrough;
+		if (!net->sctp.addip_enable)
+			goto fallthrough;
+
+		if (ntohs(param.p->length) < sizeof(struct sctp_addip_param) +
+					     sizeof(struct sctp_paramhdr)) {
+			sctp_process_inv_paramlength(asoc, param.p,
+						     chunk, err_chunk);
+			retval = SCTP_IERROR_ABORT;
+		}
+		break;
 
 	case SCTP_PARAM_HOST_NAME_ADDRESS:
 		/* Tell the peer, we won't support this param.  */

From: Uwe Kleine-König <[email protected]>

[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ]

A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver.

---
 drivers/pwm/pwm-rockchip.c | 14 --------------
 1 file changed, 14 deletions(-)

index 48bcc853d57a..cf34fb00c054 100644
@@ -392,20 +392,6 @@ static int rockchip_pwm_remove(struct platform_device *pdev)
 {
 	struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev);
 
-	/*
-	 * Disable the PWM clk before unpreparing it if the PWM device is still
-	 * running. This should only happen when the last PWM user left it
-	 * enabled, or when nobody requested a PWM that was previously enabled
-	 * by the bootloader.
-	 *
-	 * FIXME: Maybe the core should disable all PWM devices in
-	 * pwmchip_remove(). In this case we'd only have to call
-	 * clk_unprepare() after pwmchip_remove().
-	 *
-	 */
-	if (pwm_is_enabled(pc->chip.pwms))
-		clk_disable(pc->clk);
-
 	clk_unprepare(pc->pclk);
 	clk_unprepare(pc->clk);
 

2.33.0

From: Li Jinlin <[email protected]>

[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ]

The pending timer has been set up in blk_throtl_init(). However, the timer is not deleted in blk_throtl_exit(). This means that the timer handler may still be running after freeing the timer, which would result in a use-after-free.

Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit().

---
 block/blk-throttle.c | 1 +
 1 file changed, 1 insertion(+)

index a8cd7b3d9647..fcbbe2e45a2b 100644
@@ -2414,6 +2414,7 @@ int blk_throtl_init(struct request_queue *q)
 void blk_throtl_exit(struct request_queue *q)
 {
 	BUG_ON(!q->td);
+	del_timer_sync(&q->td->service_queue.pending_timer);
 	throtl_shutdown_wq(q);
 	blkcg_deactivate_policy(q, &blkcg_policy_throtl);
 	free_percpu(q->td->latency_buckets);

2.33.0

From: Nanyong Sun <[email protected]>

[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ]

If kobject_init_and_add returns with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated.

---
 fs/nilfs2/sysfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 31eed118d0ce..28f5572c6aae 100644
@@ -217,9 +217,9 @@ int nilfs_sysfs_create_snapshot_group(struct nilfs_root *root)
 	}
 
 	if (err)
-		return err;
+		kobject_put(&root->snapshot_kobj);
 
-	return 0;
+	return err;
 }
 
 void nilfs_sysfs_delete_snapshot_group(struct nilfs_root *root)

2.33.0

From: Guenter Roeck <[email protected]>

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream.

nvkm test builds fail with the following error.

drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'

The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251.

Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative.

---
 drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -57,7 +57,7 @@ nvkm_control_mthd_pstate_info(struct nvk
 		args->v0.count = 0;
 		args->v0.ustate_ac = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE;
 		args->v0.ustate_dc = NVIF_CONTROL_PSTATE_INFO_V0_USTATE_DISABLE;
-		args->v0.pwrsrc = -ENOSYS;
+		args->v0.pwrsrc = -ENODEV;
 		args->v0.pstate = NVIF_CONTROL_PSTATE_INFO_V0_PSTATE_UNKNOWN;
 	}
 

From: Xie Yongji <[email protected]>

commit f997ea3b7afc108eb9761f321b57de2d089c7c48 upstream.

This ensures we don't leak the sysfs file if we failed to allocate chan->vc_wq during probe.

---
 net/9p/trans_virtio.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -602,7 +602,7 @@ static int p9_virtio_probe(struct virtio
 	chan->vc_wq = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL);
 	if (!chan->vc_wq) {
 		err = -ENOMEM;
-		goto out_free_tag;
+		goto out_remove_file;
 	}
 	init_waitqueue_head(chan->vc_wq);
 	chan->ring_bufs_avail = 1;

@@ -620,6 +620,8 @@ static int p9_virtio_probe(struct virtio
 
 	return 0;
 
+out_remove_file:
+	sysfs_remove_file(&vdev->dev.kobj, &dev_attr_mount_tag.attr);
 out_free_tag:
 	kfree(tag);
 out_free_vq:

From: Dan Carpenter <[email protected]>

commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream.

This error path return success but it should propagate the negative error code from devm_clk_get().

---
 drivers/thermal/samsung/exynos_tmu.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1371,6 +1371,7 @@ static int exynos_tmu_probe(struct platf
 		data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
 		if (IS_ERR(data->sclk)) {
 			dev_err(&pdev->dev, "Failed to get sclk\n");
+			ret = PTR_ERR(data->sclk);
 			goto err_clk;
 		} else {
 			ret = clk_prepare_enable(data->sclk);

From: Cyrill Gorcunov <[email protected]>

commit e1fbbd073137a9d63279f6bf363151a938347640 upstream.

Keno Fischer reported that when a binray loaded via ld-linux-x the prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays before mm:end_data.

For example a test program shows

 | # ~/t
 |
 | start_code      401000
 | end_code        401a15
 | start_stack     7ffce4577dd0
 | start_data	   403e10
 | end_data        40408c
 | start_brk	   b5b000
 | sbrk(0)         b5b000

and when executed via ld-linux

 | # /lib64/ld-linux-x86-64.so.2 ~/t
 |
 | start_code      7fc25b0a4000
 | end_code        7fc25b0c4524
 | start_stack     7fffcc6b2400
 | start_data	   7fc25b0ce4c0
 | end_data        7fc25b0cff98
 | start_brk	   55555710c000
 | sbrk(0)         55555710c000

This of course prevent criu from restoring such programs. Looking into how kernel operates with brk/start_brk inside brk() syscall I don't see any problem if we allow to setup brk/start_brk without checking for end_data. Even if someone pass some weird address here on a purpose then the worst possible result will be an unexpected unmapping of existing vma (own vma, since prctl works with the callers memory) but test for RLIMIT_DATA is still valid and a user won't be able to gain more memory in case of expanding VMAs via new values shipped with prctl call.

---
 kernel/sys.c |    7 -------
 1 file changed, 7 deletions(-)

@@ -1874,13 +1874,6 @@ static int validate_prctl_map(struct prc
 	error = -EINVAL;
 
 	/*
-	 * @brk should be after @end_data in traditional maps.
-	 */
-	if (prctl_map->start_brk <= prctl_map->end_data ||
-	    prctl_map->brk <= prctl_map->end_data)
-		goto out;
-
-	/*
 	 * Neither we should allow to override limits if they set.
 	 */
 	if (check_data_rlimit(rlimit(RLIMIT_DATA), prctl_map->brk,

From: Andy Shevchenko <[email protected]>

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream.

Currently the CRST parsing relies on the fact that on most of x86 devices the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for some. Fix this by converting GSI to Linux vIRQ before checking it.

---
 drivers/dma/acpi-dma.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

@@ -72,10 +72,14 @@ static int acpi_dma_parse_resource_group
 
 	si = (const struct acpi_csrt_shared_info *)&grp[1];
 
-	/* Match device by MMIO and IRQ */
+	/* Match device by MMIO */
 	if (si->mmio_base_low != lower_32_bits(mem) ||
-	    si->mmio_base_high != upper_32_bits(mem) ||
-	    si->gsi_interrupt != irq)
+	    si->mmio_base_high != upper_32_bits(mem))
+		return 0;
+
+	/* Match device by Linux vIRQ */
+	ret = acpi_register_gsi(NULL, si->gsi_interrupt, si->interrupt_mode, si->interrupt_polarity);
+	if (ret != irq)
 		return 0;
 
 	dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",

From: Pavel Skripkin <[email protected]>

commit 2d186afd04d669fe9c48b994c41a7405a3c9f16d upstream.

Syzbot reported shift-out-of-bounds bug in profile_init().
The problem was in incorrect prof_shift. Since prof_shift value comes from userspace we need to clamp this value into [0, BITS_PER_LONG -1] boundaries.

Second possible shiht-out-of-bounds was found by Tetsuo:
sample_step local variable in read_profile() had "unsigned int" type, but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent possible shiht-out-of-bounds sample_step type was changed to "unsigned long".

Also, "unsigned short int" will be sufficient for storing [0, BITS_PER_LONG] value, that's why there is no need for "unsigned long" prof_shift.

---
 kernel/profile.c |   21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

@@ -40,7 +40,8 @@ struct profile_hit {
 #define NR_PROFILE_GRP		(NR_PROFILE_HIT/PROFILE_GRPSZ)
 
 static atomic_t *prof_buffer;
-static unsigned long prof_len, prof_shift;
+static unsigned long prof_len;
+static unsigned short int prof_shift;
 
 int prof_on __read_mostly;
 EXPORT_SYMBOL_GPL(prof_on);

@@ -66,8 +67,8 @@ int profile_setup(char *str)
 		if (str[strlen(sleepstr)] == ',')
 			str += strlen(sleepstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel sleep profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel sleep profiling enabled (shift: %u)\n",
 			prof_shift);
 #else
 		pr_warn("kernel sleep profiling requires CONFIG_SCHEDSTATS\n");

@@ -77,21 +78,21 @@ int profile_setup(char *str)
 		if (str[strlen(schedstr)] == ',')
 			str += strlen(schedstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel schedule profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel schedule profiling enabled (shift: %u)\n",
 			prof_shift);
 	} else if (!strncmp(str, kvmstr, strlen(kvmstr))) {
 		prof_on = KVM_PROFILING;
 		if (str[strlen(kvmstr)] == ',')
 			str += strlen(kvmstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel KVM profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel KVM profiling enabled (shift: %u)\n",
 			prof_shift);
 	} else if (get_option(&str, &par)) {
-		prof_shift = par;
+		prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
 		prof_on = CPU_PROFILING;
-		pr_info("kernel profiling enabled (shift: %ld)\n",
+		pr_info("kernel profiling enabled (shift: %u)\n",
 			prof_shift);
 	}
 	return 1;

@@ -467,7 +468,7 @@ read_profile(struct file *file, char __u
 	unsigned long p = *ppos;
 	ssize_t read;
 	char *pnt;
-	unsigned int sample_step = 1 << prof_shift;
+	unsigned long sample_step = 1UL << prof_shift;
 
 	profile_flip_buffers();
 	if (p >= (prof_len+1)*sizeof(unsigned int))

From: Uwe Kleine-König <[email protected]>

commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream.

This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So set the default before.

(Side-note: I don't know what this register setting actually does, if this modifies the polarity there is an inconsistency because the inversed polarity isn't considered if the PWM is already running during .probe().)

---
 drivers/pwm/pwm-lpc32xx.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

@@ -124,17 +124,17 @@ static int lpc32xx_pwm_probe(struct plat
 	lpc32xx->chip.npwm = 1;
 	lpc32xx->chip.base = -1;
 
+	/* If PWM is disabled, configure the output to the default value */
+	val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
+	val &= ~PWM_PIN_LEVEL;
+	writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
+
 	ret = pwmchip_add(&lpc32xx->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
 		return ret;
 	}
 
-	/* When PWM is disable, configure the output to the default value */
-	val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
-	val &= ~PWM_PIN_LEVEL;
-	writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
-
 	platform_set_drvdata(pdev, lpc32xx);
 
 	return 0;

From: Uwe Kleine-König <[email protected]>

commit 020162d6f49f2963062229814a56a89c86cbeaa8 upstream.

This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So reset before calling pwmchip_add().

Note that reseting the hardware isn't the right thing to do if the PWM is already running as it might e.g. disable (or even enable) a backlight that is supposed to be on (or off).

---
 drivers/pwm/pwm-mxs.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

@@ -158,6 +158,11 @@ static int mxs_pwm_probe(struct platform
 		return ret;
 	}
 
+	/* FIXME: Only do this if the PWM isn't already running */
+	ret = stmp_reset_block(mxs->base);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
+
 	ret = pwmchip_add(&mxs->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);

@@ -166,15 +171,7 @@ static int mxs_pwm_probe(struct platform
 
 	platform_set_drvdata(pdev, mxs);
 
-	ret = stmp_reset_block(mxs->base);
-	if (ret)
-		goto pwm_remove;
-
 	return 0;
-
-pwm_remove:
-	pwmchip_remove(&mxs->chip);
-	return ret;
 }
 
 static int mxs_pwm_remove(struct platform_device *pdev)

From: Christophe Leroy <[email protected]>

commit 192125ed5ce62afba24312d8e7a0314577565b4a upstream.

Below commit came with a typo in the CONFIG_ symbol, leading to a permanently reduced max key size regarless of the driver capabilities.

---
 drivers/crypto/talitos.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -816,7 +816,7 @@ static void talitos_unregister_rng(struc
  * HMAC_SNOOP_NO_AFEA (HSNA) instead of type IPSEC_ESP
  */
 #define TALITOS_CRA_PRIORITY_AEAD_HSNA	(TALITOS_CRA_PRIORITY - 1)
-#ifdef CONFIG_CRYPTO_DEV_TALITOS_SEC2
+#ifdef CONFIG_CRYPTO_DEV_TALITOS2
 #define TALITOS_MAX_KEY_SIZE		(AES_MAX_KEY_SIZE + SHA512_BLOCK_SIZE)
 #else
 #define TALITOS_MAX_KEY_SIZE		(AES_MAX_KEY_SIZE + SHA256_BLOCK_SIZE)

Hello!

Regressions detected.

While building mxs_defconfig for arm with GCC 8, 9, 10 and 11, the following error was encountered:

/builds/linux/arch/arm/mach-mxs/mach-mxs.c:285:26: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]

    285 | static const struct gpio const tx28_gpios[] __initconst = {
        |                          ^~~~~
  /builds/linux/drivers/pwm/pwm-mxs.c: In function 'mxs_pwm_probe':
  /builds/linux/drivers/pwm/pwm-mxs.c:164:24: error: implicit declaration of function 'dev_err_probe'; did you mean 'device_reprobe'? [-Werror=implicit-function-declaration]
    164 |                 return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
        |                        ^~~~~~~~~~~~~
        |                        device_reprobe

cc1: some warnings being treated as errors
make[3]: *** [/builds/linux/scripts/Makefile.build:280: drivers/pwm/pwm-mxs.o] Error 1

This is also seen in other branches (from 4.4 to 5.4). To reproduce this build locally:

  tuxmake \
    --target-arch=arm \
    --kconfig=mxs_defconfig \
    --toolchain=gcc-11 \
    --runtime=podman \
    config default kernel xipkernel modules dtbs dtbs-legacy debugkernel headers

Greetings!

Daniel Díaz
[email protected]

All tests passing for Tegra ...

Test results for stable-v4.14:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.14.248-rc1-g4e502419d5ea
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Jon