Skip to contentSkip to conversation

aspeed: Support secure boot chain with FIT image verification

PATCH Superseded Chia-Wei Wang 1 participant 14 messages Oct 15, 2021 – Oct 18, 2021

Subsystems (7)

v6 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#2 lore raw

PATCH v6 2/12 aspeed: ast2600: Enlarge SRAM size

In reply to Chia-Wei Wang

The AST2600 SRAM has been extended to 88KB since A1 chip revision. This patch updates the SRAM size to offer more space for early stack/heap use.

---
 arch/arm/include/asm/arch-aspeed/platform.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/include/asm/arch-aspeed/platform.h +1 -1
index d50ec5f8a9..589abd4a3f 100644
@@ -17,7 +17,7 @@
 #define ASPEED_MAC_COUNT	4
 #define ASPEED_DRAM_BASE	0x80000000
 #define ASPEED_SRAM_BASE	0x10000000
-#define ASPEED_SRAM_SIZE	0x10000
+#define ASPEED_SRAM_SIZE	0x16000
 #else
 #err "Unrecognized Aspeed platform."
 #endif
Signature · 1 line
2.17.1
#1 lore raw

PATCH v6 1/12 image: fit: Fix parameter name for hash algorithm

In reply to Chia-Wei Wang

Fix inconsistent parameter naming of the hash algorithm.

Fixes 92055e138f2 ("image: Drop if/elseif hash selection in calculate_hash()")
---
 common/image-fit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
common/image-fit.c +2 -2
index 5a0a0cc200..a53a2b5d6f 100644
@@ -1201,7 +1201,7 @@ int fit_set_timestamp(void *fit, int noffset, time_t timestamp)
  * calculate_hash - calculate and return hash for provided input data
  * @data: pointer to the input data
  * @data_len: data length
- * @algo: requested hash algorithm
+ * @name: requested hash algorithm name
  * @value: pointer to the char, will hold hash value data (caller must
  * allocate enough free space)
  * value_len: length of the calculated hash
@@ -1229,7 +1229,7 @@ int calculate_hash(const void *data, int data_len, const char *name,
 		return -1;
 	}
 
-	hash_algo = hash_algo_lookup_by_name(algo);
+	hash_algo = hash_algo_lookup_by_name(name);
 	if (hash_algo == HASH_ALGO_INVALID) {
 		debug("Unsupported hash algorithm\n");
 		return -1;
Signature · 1 line
2.17.1
#3 lore raw

PATCH v6 3/12 clk: ast2600: Add YCLK control for HACE

In reply to Chia-Wei Wang

From: Joel Stanley <[email protected]>

Add YCLK enable for HACE, the HW hash engine of
ASPEED AST2600 SoCs.

---
 .../arm/include/asm/arch-aspeed/scu_ast2600.h |  5 +++--
 drivers/clk/aspeed/clk_ast2600.c              | 20 +++++++++++++++++++
 2 files changed, 23 insertions(+), 2 deletions(-)
arch/arm/include/asm/arch-aspeed/scu_ast2600.h +3 -2
index a205fb1f76..d7b500f656 100644
@@ -10,8 +10,9 @@
 #define SCU_CLKGATE1_EMMC			BIT(27)
 #define SCU_CLKGATE1_MAC2			BIT(21)
 #define SCU_CLKGATE1_MAC1			BIT(20)
-#define SCU_CLKGATE1_USB_HUB		BIT(14)
-#define SCU_CLKGATE1_USB_HOST2		BIT(7)
+#define SCU_CLKGATE1_USB_HUB			BIT(14)
+#define SCU_CLKGATE1_HACE			BIT(13)
+#define SCU_CLKGATE1_USB_HOST2			BIT(7)
 
 #define SCU_CLKGATE2_FSI			BIT(30)
 #define SCU_CLKGATE2_MAC4			BIT(21)
drivers/clk/aspeed/clk_ast2600.c +20 -0
index 3a92739f5c..69128fd3c4 100644
@@ -1013,6 +1013,23 @@ static ulong ast2600_enable_usbbhclk(struct ast2600_scu *scu)
 	return 0;
 }
 
+static ulong ast2600_enable_haceclk(struct ast2600_scu *scu)
+{
+	uint32_t reset_bit;
+	uint32_t clkgate_bit;
+
+	reset_bit = BIT(ASPEED_RESET_HACE);
+	clkgate_bit = SCU_CLKGATE1_HACE;
+
+	writel(reset_bit, &scu->modrst_ctrl1);
+	udelay(100);
+	writel(clkgate_bit, &scu->clkgate_clr1);
+	mdelay(20);
+	writel(reset_bit, &scu->modrst_clr1);
+
+	return 0;
+}
+
 static int ast2600_clk_enable(struct clk *clk)
 {
 	struct ast2600_clk_priv *priv = dev_get_priv(clk->dev);
@@ -1051,6 +1068,9 @@ static int ast2600_clk_enable(struct clk *clk)
 	case ASPEED_CLK_GATE_USBPORT2CLK:
 		ast2600_enable_usbbhclk(priv->scu);
 		break;
+	case ASPEED_CLK_GATE_YCLK:
+		ast2600_enable_haceclk(priv->scu);
+		break;
 	default:
 		pr_err("can't enable clk\n");
 		return -ENOENT;
Signature · 1 line
2.17.1
#0 lore raw

v6 cover aspeed: Support secure boot chain with FIT image verification

This patch series intends to provide a secure boot chain from SPL to Linux kernel based on the hash and signature verification of FIT image paradigm.

To improve the performance and save code size (SPL is limited to 64KB due to HW-RoT), the drviers of two HW crypto engine HACE and ACRY are also added for AST26xx SoCs.

As HACE and ACRY can only access to DRAM space, additional configuration and boot command are also updated according to move each FIT image before its booting.

In addition, the common code of FIT image hash algorithm lookup is also revised to leverage the HW accelerated calculation.

v6:
- fix parameter comment for v5 update

v5:
- fix inconsistent parameter name due to parallel patch work

v4:
- add new DM_HASH based driver for Aspeed HACE
- remove SPL board init, which was originally used to probe non-DM HACE driver
- fix typo of ARCY to ACRY
- refactor defconfig based on the new Kconfig of U-Boot next branch

v3:
- add SW work around for HACE HW DMA issue by resetting HACE
- add reset control for HACE device tree node
- sync all of the HACE error message to use debug()

v2:
- update commit authors

Chia-Wei Wang (9):
image: fit: Fix parameter name for hash algorithm
aspeed: ast2600: Enlarge SRAM size
clk: ast2600: Add RSACLK control for ACRY
crypto: aspeed: Add AST2600 ACRY support
ARM: dts: ast2600: Add ACRY to device tree
ast2600: spl: Locate load buffer in DRAM space
configs: ast2600-evb: Enable SPL FIT support
configs: aspeed: Make EXTRA_ENV_SETTINGS board specific
configs: ast2600: Boot kernel FIT in DRAM

Joel Stanley (2):
clk: ast2600: Add YCLK control for HACE
ARM: dts: ast2600: Add HACE to device tree

Johnny Huang (1):
crypto: aspeed: Add AST2600 HACE support

 arch/arm/dts/ast2600-evb.dts                  |  10 +
 arch/arm/dts/ast2600.dtsi                     |  17 +
 arch/arm/include/asm/arch-aspeed/platform.h   |   2 +-
 .../arm/include/asm/arch-aspeed/scu_ast2600.h |   6 +-
 arch/arm/mach-aspeed/ast2600/spl.c            |   9 +-
 common/image-fit.c                            |   4 +-
 configs/evb-ast2600_defconfig                 |  22 +-
 drivers/clk/aspeed/clk_ast2600.c              |  38 ++
 drivers/crypto/Kconfig                        |   2 +
 drivers/crypto/Makefile                       |   1 +
 drivers/crypto/aspeed/Kconfig                 |  20 +
 drivers/crypto/aspeed/Makefile                |   2 +
 drivers/crypto/aspeed/aspeed_acry.c           | 182 +++++++++
 drivers/crypto/aspeed/aspeed_hace.c           | 381 ++++++++++++++++++
 drivers/crypto/hash/Kconfig                   |   8 +
 include/configs/aspeed-common.h               |   9 -
 include/configs/evb_ast2500.h                 |   9 +
 include/configs/evb_ast2600.h                 |  16 +
 lib/rsa/Kconfig                               |  10 +-
 19 files changed, 721 insertions(+), 27 deletions(-)
 create mode 100644 drivers/crypto/aspeed/Kconfig
 create mode 100644 drivers/crypto/aspeed/Makefile
 create mode 100644 drivers/crypto/aspeed/aspeed_acry.c
 create mode 100644 drivers/crypto/aspeed/aspeed_hace.c
Signature · 1 line
2.17.1
#5 lore raw

PATCH v6 5/12 ARM: dts: ast2600: Add HACE to device tree

From: Joel Stanley <[email protected]>

Add HACE DTS node and enable it for AST2600 EVB.

---
 arch/arm/dts/ast2600-evb.dts | 5 +++++
 arch/arm/dts/ast2600.dtsi    | 8 ++++++++
 2 files changed, 13 insertions(+)
arch/arm/dts/ast2600-evb.dts +5 -0
index 2abd31341c..adb80a30ef 100644
@@ -177,3 +177,8 @@
 			  0x08 0x04
 			  0x08 0x04>;
 };
+
+&hace {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
arch/arm/dts/ast2600.dtsi +8 -0
index f121f547e6..b8fe966c7d 100644
@@ -187,6 +187,14 @@
 			};
 		};
 
+		hace: hace@1e6d0000 {
+			compatible = "aspeed,ast2600-hace";
+			reg = <0x1e6d0000 0x200>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_YCLK>;
+			status = "disabled";
+		};
+
 		edac: sdram@1e6e0000 {
 			compatible = "aspeed,ast2600-sdram-edac";
 			reg = <0x1e6e0000 0x174>;
Signature · 1 line
2.17.1
#6 lore raw

PATCH v6 6/12 clk: ast2600: Add RSACLK control for ACRY

In reply to Chia-Wei Wang

Add RSACLK enable for ACRY, the HW RSA/ECC crypto engine of ASPEED AST2600 SoCs.

As ACRY and HACE share the same reset control bit, we do not perform the reset-hold-n-release operation during their clock ungating process. Instead, only reset release is conducted to prevent mutual interference.

---
 .../arm/include/asm/arch-aspeed/scu_ast2600.h |  1 +
 drivers/clk/aspeed/clk_ast2600.c              | 22 +++++++++++++++++--
 2 files changed, 21 insertions(+), 2 deletions(-)
arch/arm/include/asm/arch-aspeed/scu_ast2600.h +1 -0
index d7b500f656..7c5aab98b6 100644
@@ -8,6 +8,7 @@
 #define SCU_UNLOCK_KEY			0x1688a8a8
 
 #define SCU_CLKGATE1_EMMC			BIT(27)
+#define SCU_CLKGATE1_ACRY			BIT(24)
 #define SCU_CLKGATE1_MAC2			BIT(21)
 #define SCU_CLKGATE1_MAC1			BIT(20)
 #define SCU_CLKGATE1_USB_HUB			BIT(14)
drivers/clk/aspeed/clk_ast2600.c +20 -2
index 69128fd3c4..f6ebf824aa 100644
@@ -1018,11 +1018,26 @@ static ulong ast2600_enable_haceclk(struct ast2600_scu *scu)
 	uint32_t reset_bit;
 	uint32_t clkgate_bit;
 
+	/* share the same reset control bit with ACRY */
 	reset_bit = BIT(ASPEED_RESET_HACE);
 	clkgate_bit = SCU_CLKGATE1_HACE;
 
-	writel(reset_bit, &scu->modrst_ctrl1);
-	udelay(100);
+	writel(clkgate_bit, &scu->clkgate_clr1);
+	mdelay(20);
+	writel(reset_bit, &scu->modrst_clr1);
+
+	return 0;
+}
+
+static ulong ast2600_enable_rsaclk(struct ast2600_scu *scu)
+{
+	uint32_t reset_bit;
+	uint32_t clkgate_bit;
+
+	/* share the same reset control bit with HACE */
+	reset_bit = BIT(ASPEED_RESET_HACE);
+	clkgate_bit = SCU_CLKGATE1_ACRY;
+
 	writel(clkgate_bit, &scu->clkgate_clr1);
 	mdelay(20);
 	writel(reset_bit, &scu->modrst_clr1);
@@ -1071,6 +1086,9 @@ static int ast2600_clk_enable(struct clk *clk)
 	case ASPEED_CLK_GATE_YCLK:
 		ast2600_enable_haceclk(priv->scu);
 		break;
+	case ASPEED_CLK_GATE_RSACLK:
+		ast2600_enable_rsaclk(priv->scu);
+		break;
 	default:
 		pr_err("can't enable clk\n");
 		return -ENOENT;
Signature · 1 line
2.17.1
#11 lore raw

PATCH v6 10/12 configs: ast2600-evb: Enable SPL FIT support

In reply to Chia-Wei Wang

Enable SPL FIT image load and verification support. The HW accelerated SHA is also available with the newly added support of the HACE HW hash engine.

The SPL thumb build is also enabled to keep the binary less than 64KB to fit into the Aspeed secure boot design.

---
 configs/evb-ast2600_defconfig | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)
configs/evb-ast2600_defconfig +17 -3
index 56ab885d9b..eba6940ec1 100644
@@ -1,7 +1,8 @@
 CONFIG_ARM=y
 CONFIG_SYS_DCACHE_OFF=y
+CONFIG_SPL_SYS_THUMB_BUILD=y
 CONFIG_ARCH_ASPEED=y
-CONFIG_SYS_TEXT_BASE=0x10000
+CONFIG_SYS_TEXT_BASE=0x80000000
 CONFIG_ASPEED_AST2600=y
 CONFIG_TARGET_EVB_AST2600=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -12,13 +13,17 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb"
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x83000000
 CONFIG_SPL_SIZE_LIMIT=0x10000
 CONFIG_SPL=y
 # CONFIG_ARMV7_NONSEC is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_FIT=y
-# CONFIG_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
 CONFIG_USE_BOOTCOMMAND=y
@@ -26,8 +31,10 @@ CONFIG_BOOTCOMMAND="bootm 20100000"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
-# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
@@ -47,6 +54,9 @@ CONFIG_REGMAP=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
+CONFIG_DM_HASH=y
+CONFIG_HASH_ASPEED=y
+CONFIG_ASPEED_ACRY=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_SPL_MISC=y
@@ -65,5 +75,9 @@ CONFIG_SYS_NS16550=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_WDT=y
+CONFIG_SHA512_ALGO=y
+CONFIG_SHA512=y
+CONFIG_SHA384=y
 CONFIG_HEXDUMP=y
 # CONFIG_EFI_LOADER is not set
+CONFIG_PHANDLE_CHECK_SEQ=y
Signature · 1 line
2.17.1
#9 lore raw

PATCH v6 8/12 ARM: dts: ast2600: Add ACRY to device tree

In reply to Chia-Wei Wang

Add ACRY DTS node and enable it for AST2600 EVB.

---
 arch/arm/dts/ast2600-evb.dts | 5 +++++
 arch/arm/dts/ast2600.dtsi    | 9 +++++++++
 2 files changed, 14 insertions(+)
arch/arm/dts/ast2600-evb.dts +5 -0
index adb80a30ef..05362d19bd 100644
@@ -182,3 +182,8 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&acry {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
arch/arm/dts/ast2600.dtsi +9 -0
index b8fe966c7d..31905fd208 100644
@@ -195,6 +195,15 @@
 			status = "disabled";
 		};
 
+		acry: acry@1e6fa000 {
+			compatible = "aspeed,ast2600-acry";
+			reg = <0x1e6fa000 0x1000>,
+			      <0x1e710000 0x10000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scu ASPEED_CLK_GATE_RSACLK>;
+			status = "disabled";
+		};
+
 		edac: sdram@1e6e0000 {
 			compatible = "aspeed,ast2600-sdram-edac";
 			reg = <0x1e6e0000 0x174>;
Signature · 1 line
2.17.1
#10 lore raw

PATCH v6 9/12 ast2600: spl: Locate load buffer in DRAM space

In reply to Chia-Wei Wang

Return CONFIG_SYS_LOAD_ADDR pointing to DRAM space for spl_get_load_buffer() to allow generic SPL image loading code (e.g. FIT and Ymodem) to store data in DRAM.

---
 arch/arm/mach-aspeed/ast2600/spl.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)
arch/arm/mach-aspeed/ast2600/spl.c +1 -8
index 0d8cb29678..6c49d6aede 100644
@@ -28,14 +28,7 @@ u32 spl_boot_device(void)
 
 struct image_header *spl_get_load_buffer(ssize_t offset, size_t size)
 {
-	/*
-	 * When boot from SPI, AST2600 already remap 0x00000000 ~ 0x0fffffff
-	 * to BMC SPI memory space 0x20000000 ~ 0x2fffffff. The next stage BL
-	 * has been located in SPI for XIP. In this case, the load buffer for
-	 * SPL image loading will be set to the remapped address of the next
-	 * BL instead of the DRAM space CONFIG_SYS_LOAD_ADDR
-	 */
-	return (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+	return (struct image_header *)(CONFIG_SYS_LOAD_ADDR);
 }
 
 #ifdef CONFIG_SPL_OS_BOOT
Signature · 1 line
2.17.1
#7 lore raw

PATCH v6 7/12 crypto: aspeed: Add AST2600 ACRY support

In reply to Chia-Wei Wang

ACRY is deisnged to accerlerate ECC/RSA digital signature generation and verification.

---
 drivers/crypto/aspeed/Kconfig       |  10 ++
 drivers/crypto/aspeed/Makefile      |   1 +
 drivers/crypto/aspeed/aspeed_acry.c | 182 ++++++++++++++++++++++++++++
 lib/rsa/Kconfig                     |  10 +-
 4 files changed, 202 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/aspeed/aspeed_acry.c
drivers/crypto/aspeed/Kconfig +10 -0
index 471c06f986..9bf317177a 100644
@@ -8,3 +8,13 @@ config ASPEED_HACE
 	  Enabling this allows the use of SHA operations in hardware without
 	  requiring the SHA software implementations. It also improves performance
 	  and saves code size.
+
+config ASPEED_ACRY
+	bool "ASPEED RSA and ECC Engine"
+	depends on ASPEED_AST2600
+	help
+	 Select this option to enable a driver for using the RSA/ECC engine in
+	 the ASPEED BMC SoCs.
+
+	 Enabling this allows the use of RSA/ECC operations in hardware without requiring the
+	 software implementations. It also improves performance and saves code size.
drivers/crypto/aspeed/Makefile +1 -0
index 84e6bfe82a..58b55fc46e 100644
@@ -1 +1,2 @@
 obj-$(CONFIG_ASPEED_HACE) += aspeed_hace.o
+obj-$(CONFIG_ASPEED_ACRY) += aspeed_acry.o
drivers/crypto/aspeed/aspeed_acry.c new file +182 -0

182 lines not on this page · raw message

lib/rsa/Kconfig +9 -1
index a90d67e5a8..4386c1dce4 100644
@@ -1,7 +1,8 @@
 config RSA
 	bool "Use RSA Library"
 	select RSA_FREESCALE_EXP if FSL_CAAM && !ARCH_MX7 && !ARCH_MX6 && !ARCH_MX5
-	select RSA_SOFTWARE_EXP if !RSA_FREESCALE_EXP
+	select RSA_ASPEED_EXP if ASPEED_ACRY
+	select RSA_SOFTWARE_EXP if !RSA_FREESCALE_EXP && !RSA_ASPEED_EXP
 	help
 	  RSA support. This enables the RSA algorithm used for FIT image
 	  verification in U-Boot.
@@ -61,4 +62,11 @@ config RSA_FREESCALE_EXP
 	Enables driver for RSA modular exponentiation using Freescale cryptographic
 	accelerator - CAAM.
 
+config RSA_ASPEED_EXP
+	bool "Enable RSA Modular Exponentiation with ASPEED crypto accelerator"
+	depends on DM && ASPEED_ACRY
+	help
+	Enables driver for RSA modular exponentiation using ASPEED cryptographic
+	accelerator - ACRY
+
 endif
Signature · 1 line
2.17.1
#13 lore raw

PATCH v6 12/12 configs: ast2600: Boot kernel FIT in DRAM

In reply to Chia-Wei Wang

AST2600 leverages the FIT hash/signature verification to fulfill secure boot trust chain. To improve the performance and save SW code size for those crypto operations, the two HW crypto engine, HACE and ACRY, are enabled.

However, both of the engines can only access to data stored in DRAM space. Therefore, we need to move the FIT image into DRAM before the booting.

This patch update the CONFIG_BOOTCOMMAND to execute the pre-defined ENV variable which consists of FIT image copy to memory and booting.

---
 configs/evb-ast2600_defconfig | 2 +-
 include/configs/evb_ast2600.h | 7 +++++++
 2 files changed, 8 insertions(+), 1 deletion(-)
configs/evb-ast2600_defconfig +1 -1
index eba6940ec1..abb156f13e 100644
@@ -27,7 +27,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="bootm 20100000"
+CONFIG_BOOTCOMMAND="run bootspi"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
include/configs/evb_ast2600.h +7 -0
index d2aceb6663..83002db317 100644
@@ -14,7 +14,14 @@
 #define CONFIG_SYS_LOAD_ADDR		0x83000000
 
 /* Misc */
+#define STR_HELPER(s)	#s
+#define STR(s)		STR_HELPER(s)
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=" STR(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"bootspi=fdt addr 20100000 && fdt header get fitsize totalsize && " \
+	"cp.b 20100000 ${loadaddr} ${fitsize} && bootm; " \
+	"echo Error loading kernel FIT image\0" \
 	"verify=yes\0"	\
 	"spi_dma=yes\0" \
 	""
Signature · 1 line
2.17.1
#4 lore raw

PATCH v6 4/12 crypto: aspeed: Add AST2600 HACE support

In reply to Chia-Wei Wang

From: Johnny Huang <[email protected]>

Hash and Crypto Engine (HACE) is designed to accelerate the throughput of hash data digest, and symmetric-key encryption.

---
 drivers/crypto/Kconfig              |   2 +
 drivers/crypto/Makefile             |   1 +
 drivers/crypto/aspeed/Kconfig       |  10 +
 drivers/crypto/aspeed/Makefile      |   1 +
 drivers/crypto/aspeed/aspeed_hace.c | 381 ++++++++++++++++++++++++++++
 drivers/crypto/hash/Kconfig         |   8 +
 6 files changed, 403 insertions(+)
 create mode 100644 drivers/crypto/aspeed/Kconfig
 create mode 100644 drivers/crypto/aspeed/Makefile
 create mode 100644 drivers/crypto/aspeed/aspeed_hace.c
drivers/crypto/Kconfig +2 -0
index 0082177c21..675081ecd3 100644
@@ -4,4 +4,6 @@ source drivers/crypto/hash/Kconfig
 
 source drivers/crypto/fsl/Kconfig
 
+source drivers/crypto/aspeed/Kconfig
+
 endmenu
drivers/crypto/Makefile +1 -0
index e8bae43e3f..6b762565a1 100644
@@ -7,3 +7,4 @@ obj-$(CONFIG_EXYNOS_ACE_SHA)	+= ace_sha.o
 obj-y += rsa_mod_exp/
 obj-y += fsl/
 obj-y += hash/
+obj-y += aspeed/
drivers/crypto/aspeed/Kconfig new file +10 -0
new file mode 100644
index 0000000000..471c06f986
@@ -0,0 +1,10 @@
+config ASPEED_HACE
+	bool "ASPEED Hash and Crypto Engine"
+	depends on DM_HASH
+	help
+	  Select this option to enable a driver for using the SHA engine in
+	  the ASPEED BMC SoCs.
+
+	  Enabling this allows the use of SHA operations in hardware without
+	  requiring the SHA software implementations. It also improves performance
+	  and saves code size.
drivers/crypto/aspeed/Makefile new file +1 -0
new file mode 100644
index 0000000000..84e6bfe82a
@@ -0,0 +1 @@
+obj-$(CONFIG_ASPEED_HACE) += aspeed_hace.o
drivers/crypto/aspeed/aspeed_hace.c new file +381 -0

381 lines not on this page · raw message

drivers/crypto/hash/Kconfig +8 -0
index cd29a5c6a4..bf9540eca6 100644
@@ -14,3 +14,11 @@ config HASH_SOFTWARE
 	help
 	  Enable driver for hashing operations in software. Currently
 	  it support multiple hash algorithm including CRC/MD5/SHA.
+
+config HASH_ASPEED
+	bool "Enable Hash with ASPEED hash accelerator"
+	depends on DM_HASH
+	select ASPEED_HACE
+	help
+	  Enable this to support HW-assisted hashing operations using ASPEED Hash
+	  and Crypto engine - HACE
Signature · 1 line
2.17.1
#12 lore raw

PATCH v6 11/12 configs: aspeed: Make EXTRA_ENV_SETTINGS board specific

In reply to Chia-Wei Wang

Move CONFIG_EXTRA_ENV_SETTINGS to board-specific
configuration headers.

---
 include/configs/aspeed-common.h | 9 ---------
 include/configs/evb_ast2500.h   | 9 +++++++++
 include/configs/evb_ast2600.h   | 9 +++++++++
 3 files changed, 18 insertions(+), 9 deletions(-)
include/configs/aspeed-common.h +0 -9
index 5177bf20fa..96526e1a75 100644
@@ -38,13 +38,4 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"verify=yes\0"	\
-	"spi_dma=yes\0" \
-	""
-
 #endif	/* __AST_COMMON_CONFIG_H */
include/configs/evb_ast2500.h +9 -0
index dc032c1a41..a886fd941e 100644
@@ -13,4 +13,13 @@
 
 #define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
 
+/* Memory Info */
+#define CONFIG_SYS_LOAD_ADDR		0x83000000
+
+/* Misc */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"verify=yes\0"	\
+	"spi_dma=yes\0" \
+	""
+
 #endif	/* __CONFIG_H */
include/configs/evb_ast2600.h +9 -0
index 177a52eb91..d2aceb6663 100644
@@ -10,4 +10,13 @@
 
 #define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
 
+/* Memory Info */
+#define CONFIG_SYS_LOAD_ADDR		0x83000000
+
+/* Misc */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"verify=yes\0"	\
+	"spi_dma=yes\0" \
+	""
+
 #endif	/* __CONFIG_H */
Signature · 1 line
2.17.1
#8 lore raw

RE: [PATCH next v6 07/12] crypto: aspeed: Add AST2600 ACRY support

In reply to Chia-Wei Wang
Quoted 152 lines

From: U-Boot <[email protected]> On Behalf Of Chia-Wei Wang
Sent: Friday, October 15, 2021 10:04 AM

ACRY is deisnged to accerlerate ECC/RSA digital signature generation and verification.

---
 drivers/crypto/aspeed/Kconfig       |  10 ++
 drivers/crypto/aspeed/Makefile      |   1 +
 drivers/crypto/aspeed/aspeed_acry.c | 182
++++++++++++++++++++++++++++
 lib/rsa/Kconfig                     |  10 +-
 4 files changed, 202 insertions(+), 1 deletion(-)  create mode 100644

drivers/crypto/aspeed/aspeed_acry.c

drivers/crypto/aspeed/Kconfig +0 -0
index 471c06f986..9bf317177a 100644
@@ -8,3 +8,13 @@ config ASPEED_HACE
 	  Enabling this allows the use of SHA operations in hardware without
 	  requiring the SHA software implementations. It also improves

performance

drivers/crypto/aspeed/Kconfig +9 -0
 	  and saves code size.
+
+config ASPEED_ACRY
+	bool "ASPEED RSA and ECC Engine"
+	depends on ASPEED_AST2600
+	help
+	 Select this option to enable a driver for using the RSA/ECC engine in
+	 the ASPEED BMC SoCs.
+
+	 Enabling this allows the use of RSA/ECC operations in hardware without

requiring the

drivers/crypto/aspeed/Kconfig +1 -0
+	 software implementations. It also improves performance and saves code

size.

drivers/crypto/aspeed/Makefile +1 -0
index 84e6bfe82a..58b55fc46e 100644
@@ -1 +1,2 @@
 obj-$(CONFIG_ASPEED_HACE) += aspeed_hace.o
+obj-$(CONFIG_ASPEED_ACRY) += aspeed_acry.o
drivers/crypto/aspeed/aspeed_acry.c new file +52 -0
new file mode 100644
index 0000000000..0b948f828a
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2021 ASPEED Technology Inc.
+ */
+#include <config.h>
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <dm/device.h>
+#include <dm/fdtaddr.h>
+#include <linux/delay.h>
+#include <u-boot/rsa-mod-exp.h>
+
+/* ACRY register offsets */
+#define ACRY_CTRL1		0x00
+#define   ACRY_CTRL1_RSA_DMA		BIT(1)
+#define   ACRY_CTRL1_RSA_START		BIT(0)
+#define ACRY_CTRL2		0x44
+#define ACRY_CTRL3		0x48
+#define   ACRY_CTRL3_SRAM_AHB_ACCESS	BIT(8)
+#define   ACRY_CTRL3_ECC_RSA_MODE_MASK	GENMASK(5, 4)
+#define   ACRY_CTRL3_ECC_RSA_MODE_SHIFT	4
+#define ACRY_DMA_DRAM_SADDR	0x4c
+#define ACRY_DMA_DMEM_TADDR	0x50
+#define   ACRY_DMA_DMEM_TADDR_LEN_MASK	GENMASK(15, 0)
+#define   ACRY_DMA_DMEM_TADDR_LEN_SHIFT	0
+#define ACRY_RSA_PARAM		0x58
+#define   ACRY_RSA_PARAM_EXP_MASK	GENMASK(31, 16)
+#define   ACRY_RSA_PARAM_EXP_SHIFT	16
+#define   ACRY_RSA_PARAM_MOD_MASK	GENMASK(15, 0)
+#define   ACRY_RSA_PARAM_MOD_SHIFT	0
+#define ACRY_RSA_INT_EN		0x3f8
+#define   ACRY_RSA_INT_EN_RSA_READY	BIT(2)
+#define   ACRY_RSA_INT_EN_RSA_CMPLT	BIT(1)
+#define ACRY_RSA_INT_STS	0x3fc
+#define   ACRY_RSA_INT_STS_RSA_READY	BIT(2)
+#define   ACRY_RSA_INT_STS_RSA_CMPLT	BIT(1)
+
+/* misc. constant */
+#define ACRY_ECC_MODE	2
+#define ACRY_RSA_MODE	3
+#define ACRY_CTX_BUFSZ	0x600
+
+struct aspeed_acry {
+	phys_addr_t base;
+	phys_addr_t sram_base; /* internal sram */
+	struct clk clk;
+};
+
+static int aspeed_acry_mod_exp(struct udevice *dev, const uint8_t *sig,

uint32_t sig_len,

drivers/crypto/aspeed/aspeed_acry.c new file +37 -0
+			       struct key_prop *prop, uint8_t *out) {
+	int i, j;
+	u8 *ctx;
+	u8 *ptr;
+	u32 reg;
+	struct aspeed_acry *acry = dev_get_priv(dev);
+
+	ctx = memalign(16, ACRY_CTX_BUFSZ);
+	if (!ctx)
+		return -ENOMEM;
+
+	memset(ctx, 0, ACRY_CTX_BUFSZ);
+
+	ptr = (u8 *)prop->public_exponent;
+	for (i = prop->exp_len - 1, j = 0; i >= 0; --i) {
+		ctx[j] = ptr[i];
+		j++;
+		j = (j % 16) ? j : j + 32;
+	}
+
+	ptr = (u8 *)prop->modulus;
+	for (i = (prop->num_bits >> 3) - 1, j = 0; i >= 0; --i) {
+		ctx[j + 16] = ptr[i];
+		j++;
+		j = (j % 16) ? j : j + 32;
+	}
+
+	ptr = (u8 *)sig;
+	for (i = sig_len - 1, j = 0; i >= 0; --i) {
+		ctx[j + 32] = ptr[i];
+		j++;
+		j = (j % 16) ? j : j + 32;
+	}
+
+	writel((u32)ctx, acry->base + ACRY_DMA_DRAM_SADDR);
+
+	reg = (((prop->exp_len << 3) << ACRY_RSA_PARAM_EXP_SHIFT) &

ACRY_RSA_PARAM_EXP_MASK) |

drivers/crypto/aspeed/aspeed_acry.c new file +1 -0
+		  ((prop->num_bits << ACRY_RSA_PARAM_MOD_SHIFT) &

ACRY_RSA_PARAM_MOD_MASK);

drivers/crypto/aspeed/aspeed_acry.c new file +3 -0
+	writel(reg, acry->base + ACRY_RSA_PARAM);
+
+	reg = (ACRY_CTX_BUFSZ << ACRY_DMA_DMEM_TADDR_LEN_SHIFT) &

ACRY_DMA_DMEM_TADDR_LEN_MASK;

drivers/crypto/aspeed/aspeed_acry.c new file +3 -0
+	writel(reg, acry->base + ACRY_DMA_DMEM_TADDR);
+
+	reg = (ACRY_RSA_MODE << ACRY_CTRL3_ECC_RSA_MODE_SHIFT) &

ACRY_CTRL3_ECC_RSA_MODE_MASK;

drivers/crypto/aspeed/aspeed_acry.c line 106

Quoted 10 lines
drivers/crypto/aspeed/aspeed_acry.c new file +10 -0
+	writel(reg, acry->base + ACRY_CTRL3);
+
+	writel(ACRY_CTRL1_RSA_DMA | ACRY_CTRL1_RSA_START, acry->base +
+ACRY_CTRL1);
+
+	/* polling RSA status */
+	while (1) {
+		reg = readl(acry->base + ACRY_RSA_INT_STS);
+		if ((reg & ACRY_RSA_INT_STS_RSA_READY) && (reg & ACRY_RSA_INT_STS_RSA_CMPLT))
+			break;

Interrupt status clear is missed here.
Will prepare v7 patch to fix this.

Regards,
Chiawei