riscv: switch to relative extable
v2 cover riscv: switch to relative extable
From: Jisheng Zhang <[email protected]>
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup.
patch1 consolidates the __ex_table construction, it's a great code clean up even w/o the 2nd patch.
patch2 does the real job.
Since v1:
- fix build error for NOMMU case, thank [email protected]
Jisheng Zhang (2):
riscv: consolidate __ex_table construction
riscv: switch to relative exception tables
arch/riscv/include/asm/Kbuild | 1 - arch/riscv/include/asm/extable.h | 25 ++++++++++++++++++++ arch/riscv/include/asm/futex.h | 12 +++------- arch/riscv/include/asm/uaccess.h | 40 +++++++++++--------------------- arch/riscv/lib/uaccess.S | 4 ++-- arch/riscv/mm/extable.c | 2 +- scripts/mod/modpost.c | 27 +++++++++++++++++++++ scripts/sorttable.c | 2 +- 8 files changed, 73 insertions(+), 40 deletions(-) create mode 100644 arch/riscv/include/asm/extable.h
Signature · 1 line
2.33.0
PATCH v2 1/2 riscv: consolidate __ex_table construction
From: Jisheng Zhang <[email protected]>
Consolidate all the __ex_table constuction code with a _ASM_EXTABLE helper.
There should be no functional change as a result of this patch.
--- arch/riscv/include/asm/futex.h | 12 +++------- arch/riscv/include/asm/uaccess.h | 40 +++++++++++--------------------- 2 files changed, 17 insertions(+), 35 deletions(-)
arch/riscv/include/asm/futex.h +3 -9
@@ -30,10 +30,7 @@"3: li %[r],%[e] \n" \" jump 2b,%[t] \n" \" .previous \n" \ -" .section __ex_table,\"a\" \n" \ -" .balign " RISCV_SZPTR " \n" \ -" " RISCV_PTR " 1b, 3b \n" \ -" .previous \n" \ + _ASM_EXTABLE(1b ,3b ) \ : [r] "+r" (ret), [ov] "=&r" (oldval), \ [u] "+m" (*uaddr), [t] "=&r" (tmp) \: [op] " Jr" (oparg), [e] " i" (-EFAULT) \
@@ -103,11 +100,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,"4: li %[r],%[e] \n" " jump 3b,%[t] \n" " .previous \n" -" .section __ex_table,\"a\" \n" -" .balign " RISCV_SZPTR " \n" -" " RISCV_PTR " 1b, 4b \n" -" " RISCV_PTR " 2b, 4b \n" -" .previous \n" + _ASM_EXTABLE(1b, 4b) \ +_ASM_EXTABLE (2b ,4b ) \ : [r] "+r" (ret), [v] "=&r" (val), [u] "+m" (*uaddr), [t] "=&r" (tmp) : [ov] "Jr" (oldval), [nv] "Jr" (newval), [e] "i" (-EFAULT) : "memory");
arch/riscv/include/asm/uaccess.h +14 -26
@@ -10,6 +10,12 @@#include <asm/pgtable.h> /* for TASK_SIZE */ +#define _ASM_EXTABLE (from, to) \ + " .pushsection __ex_table, \"a\"\n" \ + " .balign " RISCV_SZPTR " \n" \ + " " RISCV_PTR "(" #from "), (" #to ")\n" \ + " .popsection\n" +/* * User space memory access functions */
@@ -93,10 +99,7 @@ do { \" li %1, 0\n" \" jump 2b, %2\n" \" .previous\n" \ -" .section __ex_table,\"a\"\n" \ -" .balign " RISCV_SZPTR "\n" \ -" " RISCV_PTR " 1b, 3b\n" \ -" .previous" \ + _ASM_EXTABLE(1b ,3b ) \ : "+r" (err), "=&r" (__x), "=r" (__tmp) \ : "m" (*(ptr)), "i" (-EFAULT)); \ (x) = __x; \
@@ -125,11 +128,8 @@ do { \" li %2, 0\n" \" jump 3b, %3\n" \" .previous\n" \ -" .section __ex_table,\"a\"\n" \ -" .balign " RISCV_SZPTR "\n" \ -" " RISCV_PTR " 1b, 4b\n" \ -" " RISCV_PTR " 2b, 4b\n" \ -" .previous" \ + _ASM_EXTABLE(1b, 4b) \ +_ASM_EXTABLE (2b ,4b ) \ : "+r" (err), "=&r" (__lo), "=r" (__hi), \ "=r" (__tmp) \ : "m" (__ptr[__LSW]), "m" (__ptr[__MSW]), \
@@ -233,10 +233,7 @@ do { \" li %0, %4\n" \" jump 2b, %1\n" \" .previous\n" \ -" .section __ex_table,\"a\"\n" \ -" .balign " RISCV_SZPTR "\n" \ -" " RISCV_PTR " 1b, 3b\n" \ -" .previous" \ + _ASM_EXTABLE(1b ,3b ) \ : "+r" (err), "=r" (__tmp), "=m" (*(ptr)) \ : "rJ" (__x), "i" (-EFAULT)); \ } while (0)
@@ -262,11 +259,8 @@ do { \" li %0, %6\n" \" jump 3b, %1\n" \" .previous\n" \ -" .section __ex_table,\"a\"\n" \ -" .balign " RISCV_SZPTR "\n" \ -" " RISCV_PTR " 1b, 4b\n" \ -" " RISCV_PTR " 2b, 4b\n" \ -" .previous" \ + _ASM_EXTABLE(1b, 4b) \ + _ASM_EXTABLE(2b, 4b) \ : "+r" (err), "=r" (__tmp), \"=m" (__ptr[__LSW]), \"=m" (__ptr[__MSW]) \
@@ -417,10 +411,7 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)" li %[err], %[efault]\n" \" jump 1b, %[rc]\n" \".previous\n" \ -".section __ex_table,\"a\"\n" \ -".balign " RISCV_SZPTR "\n" \ -" " RISCV_PTR " 1b, 2b\n" \ -".previous\n" \ + _ASM_EXTABLE(1b ,2b ) \ : [ret] "=&r" (__ret), \[rc] " =&r" (__rc), \ [ptr] " +A " (*__ptr), \
@@ -443,10 +434,7 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)" li %[err], %[efault]\n" \" jump 1b, %[rc]\n" \".previous\n" \ -".section __ex_table,\"a\"\n" \ -".balign " RISCV_SZPTR "\n" \ -" " RISCV_PTR " 1b, 2b\n" \ -".previous\n" \ + _ASM_EXTABLE(1b ,2b ) \ : [ret] "=&r" (__ret), \[rc] " =&r" (__rc), \ [ptr] " +A " (*__ptr), \
Signature · 1 line
2.33.0
PATCH v2 2/2 riscv: switch to relative exception tables
In reply to Jisheng ZhangFrom: Jisheng Zhang <[email protected]>
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup.
However, RISCV label difference will actually produce two relocations, a pair of R_RISCV_ADD32 and R_RISCV_SUB32. Take below simple code for example:
$ cat test.S
.section .text
1:
nop
.section __ex_table,"a"
.balign 4
.long (1b - .)
.previous$ riscv64-linux-gnu-gcc -c test.S $ riscv64-linux-gnu-readelf -r test.o Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0 000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0
The modpost will complain the R_RISCV_SUB32 relocation, so we need to patch modpost.c to skip this relocation for .rela__ex_table section.
After this patch, the __ex_table section size of defconfig vmlinux is reduced from 7072 Bytes to 3536 Bytes.
--- arch/riscv/include/asm/Kbuild | 1 - arch/riscv/include/asm/extable.h | 25 +++++++++++++++++++++++++ arch/riscv/include/asm/uaccess.h | 4 ++-- arch/riscv/lib/uaccess.S | 4 ++-- arch/riscv/mm/extable.c | 2 +- scripts/mod/modpost.c | 27 +++++++++++++++++++++++++++ scripts/sorttable.c | 2 +- 7 files changed, 58 insertions(+), 7 deletions(-) create mode 100644 arch/riscv/include/asm/extable.h
arch/riscv/include/asm/Kbuild +0 -1
@@ -1,6 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 generic-y += early_ioremap.h -generic-y += extable.h generic-y += flat.h generic-y += kvm_para.h generic-y += user.h
arch/riscv/include/asm/extable.h new file +25 -0
@@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_RISCV_EXTABLE_H +#define _ASM_RISCV_EXTABLE_H + +/* +* The exception table consists of pairs of relative offsets: the first +* is the relative offset to an instruction that is allowed to fault, +* and the second is the relative offset at which the program should +* continue. No registers are modified, so it is entirely up to the +* continuation code to figure out what to do. +* +* All the routines below use bits of fixup code that are out of line +* with the main instruction path. This means when everything is well, +* we don't even have to jump over them. Further, they do not intrude +* on our cache or tlb entries. +*/ + +struct exception_table_entry { +int insn, fixup; +}; + +#define ARCH_HAS_RELATIVE_EXTABLE + +extern int fixup_exception (struct pt_regs *regs); +#endif
arch/riscv/include/asm/uaccess.h +2 -2
@@ -12,8 +12,8 @@#define _ASM_EXTABLE (from, to) \ " .pushsection __ex_table, \"a\"\n" \ - " .balign " RISCV_SZPTR " \n" \ - " " RISCV_PTR "(" #from "), (" #to ")\n" \ + " .balign 4\n" \ + " .long (" #from " - .), (" #to " - .)\n" \ " .popsection\n"/*
arch/riscv/lib/uaccess.S +2 -2
@@ -7,8 +7,8 @@ 100: \op \reg, \addr .section __ex_table,"a" - .balign RISCV_SZPTR - RISCV_PTR 100b, \lbl + .balign 4 + .long (100b - .), (\lbl - .) .previous .endm
arch/riscv/mm/extable.c +1 -1
@@ -17,7 +17,7 @@ int fixup_exception(struct pt_regs *regs) fixup =search_exception_tables (regs->epc);if (fixup) { - regs->epc = fixup->fixup; + regs->epc = (unsigned long )&fixup->fixup + fixup->fixup;return 1 ; }return 0 ;
scripts/mod/modpost.c +27 -0
@@ -1830,6 +1830,27 @@ static int addend_mips_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)return 0 ; } +#ifndef EM_RISCV +#define EM_RISCV 243 +#endif + +#ifndef R_RISCV_SUB32 +#define R_RISCV_SUB32 39 +#endif + +static int addend_riscv_rela (struct elf_info *elf,Elf_Shdr *sechdr,Elf_Rela *r) +{ +unsigned int r_typ =ELF_R_TYPE (r->r_info); +const char *fromsec; + + fromsec =sech_name (elf, sechdr); + fromsec +=strlen (".rela" ); + +if (!strcmp ("__ex_table" , fromsec) && r_typ ==R_RISCV_SUB32 ) +return 1 ;/* skip this */ +return 0 ; +} +static void section_rela (const char *modname,struct elf_info *elf,Elf_Shdr *sechdr) {
@@ -1866,6 +1887,12 @@ static void section_rela(const char *modname, struct elf_info *elf, r_sym =ELF_R_SYM (r.r_info);#endif r.r_addend =TO_NATIVE (rela->r_addend); +switch (elf->hdr->e_machine) { +case EM_RISCV : +if (addend_riscv_rela (elf, sechdr, &r)) +continue ; +break ; + } sym = elf->symtab_start + r_sym;/* Skip special sections */ if (is_shndx_special (sym->st_shndx))
scripts/sorttable.c +1 -1
@@ -346,6 +346,7 @@ static int do_file(char const *const fname, void *addr)case EM_PARISC :case EM_PPC :case EM_PPC64 : +case EM_RISCV : custom_sort = sort_relative_table;break ;case EM_ARCOMPACT :
@@ -353,7 +354,6 @@ static int do_file(char const *const fname, void *addr)case EM_ARM :case EM_MICROBLAZE :case EM_MIPS : -case EM_RISCV :case EM_XTENSA :break ;default :
Signature · 1 line
2.33.0
Re: [PATCH v2 1/2] riscv: consolidate __ex_table construction
In reply to Jisheng ZhangQuoted 48 lines · Jisheng Zhang
From: Jisheng Zhang <[email protected]>
Consolidate all the
__ex_tableconstuction code with a_ASM_EXTABLEhelper.There should be no functional change as a result of this patch.
Signed-off-by Jisheng Zhang <[email protected]>--- arch/riscv/include/asm/futex.h | 12 +++------- arch/riscv/include/asm/uaccess.h | 40 +++++++++++--------------------- 2 files changed, 17 insertions(+), 35 deletions(-)arch/riscv/include/asm/futex.h +3
-9@@ -30,10 +30,7 @@"3: li %[r],%[e] \n" \" jump 2b,%[t] \n" \" .previous \n" \ -" .section __ex_table,\"a\" \n" \ -" .balign " RISCV_SZPTR " \n" \ -" " RISCV_PTR " 1b, 3b \n" \ -" .previous \n" \ + _ASM_EXTABLE(1b ,3b ) \ : [r] "+r" (ret), [ov] "=&r" (oldval), \ [u] "+m" (*uaddr), [t] "=&r" (tmp) \: [op] " Jr" (oparg), [e] " i" (-EFAULT) \ @@ -103,11 +100,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,"4: li %[r],%[e] \n" " jump 3b,%[t] \n" " .previous \n" -" .section __ex_table,\"a\" \n" -" .balign " RISCV_SZPTR " \n" -" " RISCV_PTR " 1b, 4b \n" -" " RISCV_PTR " 2b, 4b \n" -" .previous \n" + _ASM_EXTABLE(1b, 4b) \ +_ASM_EXTABLE (2b ,4b ) \ : [r] "+r" (ret), [v] "=&r" (val), [u] "+m" (*uaddr), [t] "=&r" (tmp) : [ov] "Jr" (oldval), [nv] "Jr" (newval), [e] "i" (-EFAULT) : "memory");arch/riscv/include/asm/uaccess.h +0
-0
arch/riscv/include/asm/uaccess.h line 18
Quoted 9 lines
arch/riscv/include/asm/uaccess.h +6
-0@@ -10,6 +10,12 @@#include <asm/pgtable.h> /* for TASK_SIZE */ +#define _ASM_EXTABLE (from, to) \ + " .pushsection __ex_table, \"a\"\n" \ + " .balign " RISCV_SZPTR " \n" \ + " " RISCV_PTR "(" #from "), (" #to ")\n" \ + " .popsection\n" +
The jump_label mechanism could use this macro too,
see arch/riscv/include/asm/jump_label.h, maybe move the above into asm.h and also do some replace in next patch ?
Question: the jump label use relative address, but why not trigger the Section mismatch issue?
Re: [PATCH v2 2/2] riscv: switch to relative exception tables
In reply to Jisheng ZhangQuoted 34 lines · Jisheng Zhang
From: Jisheng Zhang <[email protected]>
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup.
However, RISCV label difference will actually produce two relocations, a pair of
R_RISCV_ADD32andR_RISCV_SUB32. Take below simple code for example:$ cat test.S .section .text 1: nop .section __ex_table,"a" .balign 4 .long (1b - .) .previous$ riscv64-linux-gnu-gcc -c test.S $ riscv64-linux-gnu-readelf -r test.o Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0 000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0The modpost will complain the
R_RISCV_SUB32relocation, so we need to patchmodpost.cto skip this relocation for .rela__ex_table section.After this patch, the
__ex_tablesection size of defconfig vmlinux is reduced from 7072 Bytes to 3536 Bytes.Signed-off-by Jisheng Zhang <[email protected]>---
...
Quoted 33 lines
scripts/mod/modpost.c +21
-0@@ -1830,6 +1830,27 @@ static int addend_mips_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)return 0 ; } +#ifndef EM_RISCV +#define EM_RISCV 243 +#endif + +#ifndef R_RISCV_SUB32 +#define R_RISCV_SUB32 39 +#endif + +static int addend_riscv_rela (struct elf_info *elf,Elf_Shdr *sechdr,Elf_Rela *r) +{ +unsigned int r_typ =ELF_R_TYPE (r->r_info); +const char *fromsec; + + fromsec =sech_name (elf, sechdr); + fromsec +=strlen (".rela" ); + +if (!strcmp ("__ex_table" , fromsec) && r_typ ==R_RISCV_SUB32 ) +return 1 ;/* skip this */ +return 0 ; +} +static void section_rela (const char *modname,struct elf_info *elf,Elf_Shdr *sechdr) {
scripts/mod/modpost.c static void section_rela(const char *modname, struct elf_info *elf, · line 1892
Quoted 6 lines
scripts/mod/modpost.c +3
-0@@ -1866,6 +1887,12 @@ static void section_rela(const char *modname, struct elf_info *elf, r_sym =ELF_R_SYM (r.r_info);#endif r.r_addend =TO_NATIVE (rela->r_addend); +switch (elf->hdr->e_machine) { +case EM_RISCV : +if (addend_riscv_rela (elf, sechdr, &r))
directly use
if (!strcmp("__ex_table", fromsec) && ELF_R_TYPE(r.r_info) == R_RISCV_SUB32)
Quoted 27 lines
scripts/mod/modpost.c +3
-0+continue ; +break ; + } sym = elf->symtab_start + r_sym;/* Skip special sections */ if (is_shndx_special (sym->st_shndx))scripts/sorttable.c +1
-1@@ -346,6 +346,7 @@ static int do_file(char const *const fname, void *addr)case EM_PARISC :case EM_PPC :case EM_PPC64 : +case EM_RISCV : custom_sort = sort_relative_table;break ;case EM_ARCOMPACT :@@ -353,7 +354,6 @@ static int do_file(char const *const fname, void *addr)case EM_ARM :case EM_MICROBLAZE :case EM_MIPS : -case EM_RISCV :case EM_XTENSA :break ;default :
Re: [PATCH v2 1/2] riscv: consolidate __ex_table construction
In reply to Kefeng WangQuoted 52 lines · On Thu, 21 Oct 2021 19:38:41 +0800 Kefeng Wang <[email protected]>…
Quoted 51 lines · Jisheng Zhang
From: Jisheng Zhang <[email protected]>
Consolidate all the
__ex_tableconstuction code with a_ASM_EXTABLEhelper.There should be no functional change as a result of this patch.
Signed-off-by Jisheng Zhang <[email protected]>--- arch/riscv/include/asm/futex.h | 12 +++------- arch/riscv/include/asm/uaccess.h | 40 +++++++++++--------------------- 2 files changed, 17 insertions(+), 35 deletions(-)arch/riscv/include/asm/futex.h +3
-9@@ -30,10 +30,7 @@"3: li %[r],%[e] \n" \" jump 2b,%[t] \n" \" .previous \n" \ -" .section __ex_table,\"a\" \n" \ -" .balign " RISCV_SZPTR " \n" \ -" " RISCV_PTR " 1b, 3b \n" \ -" .previous \n" \ + _ASM_EXTABLE(1b ,3b ) \ : [r] "+r" (ret), [ov] "=&r" (oldval), \ [u] "+m" (*uaddr), [t] "=&r" (tmp) \: [op] " Jr" (oparg), [e] " i" (-EFAULT) \ @@ -103,11 +100,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,"4: li %[r],%[e] \n" " jump 3b,%[t] \n" " .previous \n" -" .section __ex_table,\"a\" \n" -" .balign " RISCV_SZPTR " \n" -" " RISCV_PTR " 1b, 4b \n" -" " RISCV_PTR " 2b, 4b \n" -" .previous \n" + _ASM_EXTABLE(1b, 4b) \ +_ASM_EXTABLE (2b ,4b ) \ : [r] "+r" (ret), [v] "=&r" (val), [u] "+m" (*uaddr), [t] "=&r" (tmp) : [ov] "Jr" (oldval), [nv] "Jr" (newval), [e] "i" (-EFAULT) : "memory");arch/riscv/include/asm/uaccess.h +0
-0@@ -10,6 +10,12 @@#include <asm/pgtable.h> /* for TASK_SIZE */
Quoted 10 lines
arch/riscv/include/asm/uaccess.h line 18
Quoted 6 lines
arch/riscv/include/asm/uaccess.h +6
-0+#define _ASM_EXTABLE (from, to) \ + " .pushsection __ex_table, \"a\"\n" \ + " .balign " RISCV_SZPTR " \n" \ + " " RISCV_PTR "(" #from "), (" #to ")\n" \ + " .popsection\n" +The
jump_labelmechanism could use this macro too,
seearch/riscv/include/asm/jump_label.h, maybe move the above intoasm.hand also do some replace in next patch ?
jump_label entry is a bit different with ex_table: two relative offsets and a key which should be "long" type.
Quoted 3 lines
Question: the jump label use relative address, but why not trigger the Section mismatch issue?
FWICT, modpost doesn't check __jump_table section
Re: [PATCH v2 2/2] riscv: switch to relative exception tables
In reply to Kefeng WangQuoted 72 lines · On Thu, 21 Oct 2021 19:42:48 +0800 Kefeng Wang <[email protected]>…
Quoted 34 lines · Jisheng Zhang
From: Jisheng Zhang <[email protected]>
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup.
However, RISCV label difference will actually produce two relocations, a pair of
R_RISCV_ADD32andR_RISCV_SUB32. Take below simple code for example:$ cat test.S .section .text 1: nop .section __ex_table,"a" .balign 4 .long (1b - .) .previous$ riscv64-linux-gnu-gcc -c test.S $ riscv64-linux-gnu-readelf -r test.o Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0 000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0The modpost will complain the
R_RISCV_SUB32relocation, so we need to patchmodpost.cto skip this relocation for .rela__ex_table section.After this patch, the
__ex_tablesection size of defconfig vmlinux is reduced from 7072 Bytes to 3536 Bytes.Signed-off-by Jisheng Zhang <[email protected]>---
...
Quoted 33 lines
scripts/mod/modpost.c +21
-0@@ -1830,6 +1830,27 @@ static int addend_mips_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)return 0 ; } +#ifndef EM_RISCV +#define EM_RISCV 243 +#endif + +#ifndef R_RISCV_SUB32 +#define R_RISCV_SUB32 39 +#endif + +static int addend_riscv_rela (struct elf_info *elf,Elf_Shdr *sechdr,Elf_Rela *r) +{ +unsigned int r_typ =ELF_R_TYPE (r->r_info); +const char *fromsec; + + fromsec =sech_name (elf, sechdr); + fromsec +=strlen (".rela" ); + +if (!strcmp ("__ex_table" , fromsec) && r_typ ==R_RISCV_SUB32 ) +return 1 ;/* skip this */ +return 0 ; +} +static void section_rela (const char *modname,struct elf_info *elf,Elf_Shdr *sechdr) {@@ -1866,6 +1887,12 @@ static void section_rela(const char *modname, struct elf_info *elf,
Quoted 8 lines
scripts/mod/modpost.c static void section_rela(const char *modname, struct elf_info *elf, · line 1892
Quoted 6 lines
scripts/mod/modpost.c +3
-0r_sym =ELF_R_SYM (r.r_info);#endif r.r_addend =TO_NATIVE (rela->r_addend); +switch (elf->hdr->e_machine) { +case EM_RISCV : +if (addend_riscv_rela (elf, sechdr, &r))directly use
if (!strcmp("__ex_table", fromsec) &&ELF_R_TYPE(r.r_info)==R_RISCV_SUB32)
My local initial patch is as direct as this LoC;) then later I thought we may need do something more in future. But now I think we can do code refactoring then. Will send patch v3 soon.
Thanks
Quoted 20 lines
Quoted 20 lines
scripts/mod/modpost.c +3
-0+continue ; +break ; + } sym = elf->symtab_start + r_sym;/* Skip special sections */ if (is_shndx_special (sym->st_shndx))scripts/sorttable.c +1
-0@@ -346,6 +346,7 @@ static int do_file(char const *const fname, void *addr)case EM_PARISC :case EM_PPC :case EM_PPC64 : +case EM_RISCV : custom_sort = sort_relative_table;break ;case EM_ARCOMPACT :@@ -353,7 +354,6 @@ static int do_file(char const *const fname, void *addr)
Quoted 8 lines
scripts/sorttable.c static int do_file(char const *const fname, void *addr) · line 359
Quoted 8 lines
scripts/sorttable.c +0
-1case EM_ARM :case EM_MICROBLAZE :case EM_MIPS : -case EM_RISCV :case EM_XTENSA :break ;default :
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v2 1/2] riscv: consolidate __ex_table construction
In reply to Jisheng ZhangQuoted 66 lines · Jisheng Zhang
Quoted 52 lines · On Thu, 21 Oct 2021 19:38:41 +0800 Kefeng Wang <[email protected]>…
Quoted 51 lines · Jisheng Zhang
From: Jisheng Zhang <[email protected]>
Consolidate all the
__ex_tableconstuction code with a_ASM_EXTABLEhelper.There should be no functional change as a result of this patch.
Signed-off-by Jisheng Zhang <[email protected]>--- arch/riscv/include/asm/futex.h | 12 +++------- arch/riscv/include/asm/uaccess.h | 40 +++++++++++--------------------- 2 files changed, 17 insertions(+), 35 deletions(-)arch/riscv/include/asm/futex.h +3
-9@@ -30,10 +30,7 @@"3: li %[r],%[e] \n" \" jump 2b,%[t] \n" \" .previous \n" \ -" .section __ex_table,\"a\" \n" \ -" .balign " RISCV_SZPTR " \n" \ -" " RISCV_PTR " 1b, 3b \n" \ -" .previous \n" \ + _ASM_EXTABLE(1b ,3b ) \ : [r] "+r" (ret), [ov] "=&r" (oldval), \ [u] "+m" (*uaddr), [t] "=&r" (tmp) \: [op] " Jr" (oparg), [e] " i" (-EFAULT) \ @@ -103,11 +100,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,"4: li %[r],%[e] \n" " jump 3b,%[t] \n" " .previous \n" -" .section __ex_table,\"a\" \n" -" .balign " RISCV_SZPTR " \n" -" " RISCV_PTR " 1b, 4b \n" -" " RISCV_PTR " 2b, 4b \n" -" .previous \n" + _ASM_EXTABLE(1b, 4b) \ +_ASM_EXTABLE (2b ,4b ) \ : [r] "+r" (ret), [v] "=&r" (val), [u] "+m" (*uaddr), [t] "=&r" (tmp) : [ov] "Jr" (oldval), [nv] "Jr" (newval), [e] "i" (-EFAULT) : "memory");arch/riscv/include/asm/uaccess.h +0
-0@@ -10,6 +10,12 @@#include <asm/pgtable.h> /* for TASK_SIZE */ Quoted 10 lines
arch/riscv/include/asm/uaccess.h line 18
Quoted 6 lines
arch/riscv/include/asm/uaccess.h +6
-0+#define _ASM_EXTABLE (from, to) \ + " .pushsection __ex_table, \"a\"\n" \ + " .balign " RISCV_SZPTR " \n" \ + " " RISCV_PTR "(" #from "), (" #to ")\n" \ + " .popsection\n" +The
jump_labelmechanism could use this macro too,
seearch/riscv/include/asm/jump_label.h, maybe move the above intoasm.hand also do some replace in next patch ?
Quoted 8 lines
jump_labelentry is a bit different withex_table: two relative offsets and a key which should be "long" type.Quoted 3 lines
Question: the jump label use relative address, but why not trigger the Section mismatch issue?
FWICT, modpost doesn't check
__jump_tablesection
OK, missing that.
Quoted 4 lines
.