4.4.291-rc1 review

From: Nick Desaulniers <[email protected]>

commit e6a0c958bdf9b2e1b57501fc9433a461f0a6aadd upstream.

A kernel built with CONFIG_THUMB2_KERNEL=y and using clang as the assembler could generate non-naturally-aligned v7wbi_tlb_fns which results in a boot failure. The original commit adding the macro missed the .align directive on this data.

---
 arch/arm/mm/proc-macros.S |    1 +
 1 file changed, 1 insertion(+)

@@ -327,6 +327,7 @@ ENTRY(\name\()_cache_fns)
 
 .macro define_tlb_functions name:req, flags_up:req, flags_smp
 	.type	\name\()_tlb_fns, #object
+	.align 2
 ENTRY(\name\()_tlb_fns)
 	.long	\name\()_flush_user_tlb_range
 	.long	\name\()_flush_kern_tlb_range

From: Johan Hovold <[email protected]>

commit 8c8171929116cc23f74743d99251eedadf62341a upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

---
 drivers/mmc/host/vub300.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

@@ -579,7 +579,7 @@ static void check_vub300_port_status(str
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (sizeof(vub300->system_port_status) == retval)
 		new_system_port_status(vub300);
 }

@@ -1245,7 +1245,7 @@ static void __download_offload_pseudocod
 						SET_INTERRUPT_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0) {
 				strncpy(vub300->vub_name,

@@ -1292,7 +1292,7 @@ static void __download_offload_pseudocod
 						SET_TRANSFER_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0) {
 				strncpy(vub300->vub_name,

@@ -1998,7 +1998,7 @@ static void __set_clock_speed(struct vub
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_CLOCK_SPEED,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x00, 0x00, buf, buf_array_size, HZ);
+				0x00, 0x00, buf, buf_array_size, 1000);
 	if (retval != 8) {
 		dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
 			" %dkHz failed with retval=%d\n", kHzClock, retval);

@@ -2020,14 +2020,14 @@ static void vub300_mmc_set_ios(struct mm
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0000, 0x0000, NULL, 0, HZ);
+				0x0000, 0x0000, NULL, 0, 1000);
 		/* must wait for the VUB300 u-proc to boot up */
 		msleep(600);
 	} else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0001, 0x0000, NULL, 0, HZ);
+				0x0001, 0x0000, NULL, 0, 1000);
 		msleep(600);
 		vub300->card_powered = 1;
 	} else if (ios->power_mode == MMC_POWER_ON) {

@@ -2290,14 +2290,14 @@ static int vub300_probe(struct usb_inter
 				GET_HC_INF0,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->hc_info,
-				sizeof(vub300->hc_info), HZ);
+				sizeof(vub300->hc_info), 1000);
 	if (retval < 0)
 		goto error5;
 	retval =
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_ROM_WAIT_STATES,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
+				firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
 	if (retval < 0)
 		goto error5;
 	dev_info(&vub300->udev->dev,

@@ -2312,7 +2312,7 @@ static int vub300_probe(struct usb_inter
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (retval < 0) {
 		goto error4;
 	} else if (sizeof(vub300->system_port_status) == retval) {

From: Jaehoon Chung <[email protected]>

commit 697542bceae51f7620af333b065dd09d213629fb upstream.

Even though there are candiates value if can't find best value, it's returned -EIO. It's not proper behavior.
If there is not best value, use a first candiate value to work eMMC.

---
 drivers/mmc/host/dw_mmc-exynos.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

@@ -442,6 +442,18 @@ static s8 dw_mci_exynos_get_best_clksmpl
 		}
 	}
 
+	/*
+	 * If there is no cadiates value, then it needs to return -EIO.
+	 * If there are candiates values and don't find bset clk sample value,
+	 * then use a first candiates clock sample value.
+	 */
+	for (i = 0; i < iter; i++) {
+		__c = ror8(candiates, i);
+		if ((__c & 0x1) == 0x1) {
+			loc = i;
+			goto out;
+		}
+	}
 out:
 	return loc;
 }

@@ -472,6 +484,8 @@ static int dw_mci_exynos_execute_tuning(
 		priv->tuned_sample = found;
 	} else {
 		ret = -EIO;
+		dev_warn(&mmc->class_dev,
+			"There is no candiates value about clksmpl!\n");
 	}
 
 	return ret;

From: Shawn Guo <[email protected]>

commit 4217d07b9fb328751f877d3bd9550122014860a2 upstream.

On Thundercomm TurboX CM2290, the eMMC OCR reports vdd = 23 (3.5 ~ 3.6 V), which is being treated as an invalid value by sdhci_set_power_noreg(). And thus eMMC is totally broken on the platform.

[    1.436599] ------------[ cut here ]------------
[    1.436606] mmc0: Invalid vdd 0x17
[    1.436640] WARNING: CPU: 2 PID: 69 at drivers/mmc/host/sdhci.c:2048 sdhci_set_power_noreg+0x168/0x2b4
[    1.436655] Modules linked in:
[    1.436662] CPU: 2 PID: 69 Comm: kworker/u8:1 Tainted: G        W         5.15.0-rc1+ #137
[    1.436669] Hardware name: Thundercomm TurboX CM2290 (DT)
[    1.436674] Workqueue: events_unbound async_run_entry_fn
[    1.436685] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.436692] pc : sdhci_set_power_noreg+0x168/0x2b4
[    1.436698] lr : sdhci_set_power_noreg+0x168/0x2b4
[    1.436703] sp : ffff800010803a60
[    1.436705] x29: ffff800010803a60 x28: ffff6a9102465f00 x27: ffff6a9101720a70
[    1.436715] x26: ffff6a91014de1c0 x25: ffff6a91014de010 x24: ffff6a91016af280
[    1.436724] x23: ffffaf7b1b276640 x22: 0000000000000000 x21: ffff6a9101720000
[    1.436733] x20: ffff6a9101720370 x19: ffff6a9101720580 x18: 0000000000000020
[    1.436743] x17: 0000000000000000 x16: 0000000000000004 x15: ffffffffffffffff
[    1.436751] x14: 0000000000000000 x13: 00000000fffffffd x12: ffffaf7b1b84b0bc
[    1.436760] x11: ffffaf7b1b720d10 x10: 000000000000000a x9 : ffff800010803a60
[    1.436769] x8 : 000000000000000a x7 : 000000000000000f x6 : 00000000fffff159
[    1.436778] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[    1.436787] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6a9101718d80
[    1.436797] Call trace:
[    1.436800]  sdhci_set_power_noreg+0x168/0x2b4
[    1.436805]  sdhci_set_ios+0xa0/0x7fc
[    1.436811]  mmc_power_up.part.0+0xc4/0x164
[    1.436818]  mmc_start_host+0xa0/0xb0
[    1.436824]  mmc_add_host+0x60/0x90
[    1.436830]  __sdhci_add_host+0x174/0x330
[    1.436836]  sdhci_msm_probe+0x7c0/0x920
[    1.436842]  platform_probe+0x68/0xe0
[    1.436850]  really_probe.part.0+0x9c/0x31c
[    1.436857]  __driver_probe_device+0x98/0x144
[    1.436863]  driver_probe_device+0xc8/0x15c
[    1.436869]  __device_attach_driver+0xb4/0x120
[    1.436875]  bus_for_each_drv+0x78/0xd0
[    1.436881]  __device_attach_async_helper+0xac/0xd0
[    1.436888]  async_run_entry_fn+0x34/0x110
[    1.436895]  process_one_work+0x1d0/0x354
[    1.436903]  worker_thread+0x13c/0x470
[    1.436910]  kthread+0x150/0x160
[    1.436915]  ret_from_fork+0x10/0x20
[    1.436923] ---[ end trace fcfac44cb045c3a8 ]---

Fix the issue by mapping MMC_VDD_35_36 (and MMC_VDD_34_35) to SDHCI_POWER_330 as well.

---
 drivers/mmc/host/sdhci.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -1319,6 +1319,12 @@ void sdhci_set_power(struct sdhci_host *
 			break;
 		case MMC_VDD_32_33:
 		case MMC_VDD_33_34:
+		/*
+		 * 3.4 ~ 3.6V are valid only for those platforms where it's
+		 * known that the voltage range is supported by hardware.
+		 */
+		case MMC_VDD_34_35:
+		case MMC_VDD_35_36:
 			pwr = SDHCI_POWER_330;
 			break;
 		default:

From: Johan Hovold <[email protected]>

commit db6c3c064f5d55fa9969f33eafca3cdbefbb3541 upstream.

Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")).

---
 drivers/net/usb/lan78xx.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -2956,6 +2956,12 @@ static int lan78xx_probe(struct usb_inte
 
 	dev->maxpacket = usb_maxpacket(dev->udev, dev->pipe_out, 1);
 
+	/* Reject broken descriptors. */
+	if (dev->maxpacket == 0) {
+		ret = -ENODEV;
+		goto out3;
+	}
+
 	/* driver requires remote-wakeup capability during autosuspend. */
 	intf->needs_remote_wakeup = 1;
 

From: Yang Yingliang <[email protected]>

commit 55e6d8037805b3400096d621091dfbf713f97e83 upstream.

In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows:

BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390
Call Trace:
 slab_free_freelist_hook+0x10d/0x240
 kfree+0xce/0x390
 regcache_rbtree_exit+0x15d/0x1a0
 regcache_rbtree_init+0x224/0x2c0
 regcache_init+0x88d/0x1310
 __regmap_init+0x3151/0x4a80
 __devm_regmap_init+0x7d/0x100
 madera_spi_probe+0x10f/0x333 [madera_spi]
 spi_probe+0x183/0x210
 really_probe+0x285/0xc30

To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails.

---
 drivers/base/regmap/regcache-rbtree.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

@@ -296,14 +296,14 @@ static int regcache_rbtree_insert_to_blo
 	if (!blk)
 		return -ENOMEM;
 
+	rbnode->block = blk;
+
 	if (BITS_TO_LONGS(blklen) > BITS_TO_LONGS(rbnode->blklen)) {
 		present = krealloc(rbnode->cache_present,
 				   BITS_TO_LONGS(blklen) * sizeof(*present),
 				   GFP_KERNEL);
-		if (!present) {
-			kfree(blk);
+		if (!present)
 			return -ENOMEM;
-		}
 
 		memset(present + BITS_TO_LONGS(rbnode->blklen), 0,
 		       (BITS_TO_LONGS(blklen) - BITS_TO_LONGS(rbnode->blklen))

@@ -320,7 +320,6 @@ static int regcache_rbtree_insert_to_blo
 	}
 
 	/* update the rbnode block, its size and the base register */
-	rbnode->block = blk;
 	rbnode->blklen = blklen;
 	rbnode->base_reg = base_reg;
 	rbnode->cache_present = present;

From: Guenter Roeck <[email protected]>

commit 4a089e95b4d6bb625044d47aed0c442a8f7bd093 upstream.

nios2:allmodconfig builds fail with

make[1]: *** No rule to make target 'arch/nios2/boot/dts/""',
needed by 'arch/nios2/boot/dts/built-in.a'. Stop.
make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored)

This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL, which in turn enables NIOS2_DTB_SOURCE. This causes the build error because the default value for NIOS2_DTB_SOURCE is an empty string. Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error.

---
 arch/nios2/platform/Kconfig.platform |    1 +
 1 file changed, 1 insertion(+)

@@ -37,6 +37,7 @@ config NIOS2_DTB_PHYS_ADDR
 
 config NIOS2_DTB_SOURCE_BOOL
 	bool "Compile and link device tree into kernel image"
+	depends on !COMPILE_TEST
 	default n
 	help
 	  This allows you to specify a dts (device tree source) file

From: Arnd Bergmann <[email protected]>

commit eaf6cc7165c9c5aa3c2f9faa03a98598123d0afb upstream.

Both the decompressor code and the kasan logic try to override the memcpy() and memmove() definitions, which leading to a clash in a KASAN-enabled kernel with XZ decompression:

arch/arm/boot/compressed/decompress.c:50:9: error: 'memmove' macro redefined [-Werror,-Wmacro-redefined]

 #define memmove memmove
        ^
arch/arm/include/asm/string.h:59:9: note: previous definition is here
 #define memmove(dst, src, len) __memmove(dst, src, len)
        ^
arch/arm/boot/compressed/decompress.c:51:9: error: 'memcpy' macro redefined [-Werror,-Wmacro-redefined]
 #define memcpy memcpy
        ^
arch/arm/include/asm/string.h:58:9: note: previous definition is here
 #define memcpy(dst, src, len) __memcpy(dst, src, len)
        ^

Here we want the set of functions from the decompressor, so undefine the other macros before the override.

---
 arch/arm/boot/compressed/decompress.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -46,7 +46,10 @@ extern char * strstr(const char * s1, co
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif

From: Xin Long <[email protected]>

[ Upstream commit aa0f697e45286a6b5f0ceca9418acf54b9099d99 ]

sctp_sf_violation() is called when processing HEARTBEAT_ACK chunk in cookie_wait state, and some other places are also using it.

The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc.

---
 net/sctp/sm_statefuns.c | 3 +++
 1 file changed, 3 insertions(+)

index b83f90bb1a6e..53bb631ec490 100644
@@ -4337,6 +4337,9 @@ sctp_disposition_t sctp_sf_violation(struct net *net,
 {
 	struct sctp_chunk *chunk = arg;
 
+	if (!sctp_vtag_verify(chunk, asoc))
+		return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
+
 	/* Make sure that the chunk has a valid length. */
 	if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t)))
 		return sctp_sf_violation_chunklen(net, ep, asoc, type, arg,

2.33.0

From: Xin Long <[email protected]>

[ Upstream commit 4f7019c7eb33967eb87766e0e4602b5576873680 ]

Currently Linux SCTP uses the verification tag of the existing SCTP asoc when failing to process and sending the packet with the ABORT chunk. This will result in the peer accepting the ABORT chunk and removing the SCTP asoc. One could exploit this to terminate a SCTP asoc.

This patch is to fix it by always using the initiate tag of the received INIT chunk for the ABORT chunk to be sent.

---
 net/sctp/sm_statefuns.c | 1 +
 1 file changed, 1 insertion(+)

index a9ba6f2bb8c8..b83f90bb1a6e 100644
@@ -6027,6 +6027,7 @@ static struct sctp_packet *sctp_ootb_pkt_new(struct net *net,
 		 * yet.
 		 */
 		switch (chunk->chunk_hdr->type) {
+		case SCTP_CID_INIT:
 		case SCTP_CID_INIT_ACK:
 		{
 			sctp_initack_chunk_t *initack;

2.33.0

From: Arnd Bergmann <[email protected]>

commit 1f323127cab086e4fd618981b1e5edc396eaf0f4 upstream.

With extra warnings enabled, gcc complains about this function definition:

arch/arm/probes/kprobes/core.c: In function 'arch_init_kprobes':
arch/arm/probes/kprobes/core.c:465:12: warning: old-style function definition [-Wold-style-definition]
465 | int __init arch_init_kprobes()

---
 arch/arm/probes/kprobes/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -666,7 +666,7 @@ static struct undef_hook kprobes_arm_bre
 
 #endif /* !CONFIG_THUMB2_KERNEL */
 
-int __init arch_init_kprobes()
+int __init arch_init_kprobes(void)
 {
 	arm_probes_decode_init();
 #ifdef CONFIG_THUMB2_KERNEL

From: Nathan Chancellor <[email protected]>

commit 091bb549f7722723b284f63ac665e2aedcf9dec9 upstream.

This option is not supported by lld:

ld.lld: error: unknown argument: -p

This has been a no-op in binutils since 2004 (see commit dea514f51da1 in that tree). Given that the lowest officially supported of binutils for the kernel is 2.20, which was released in 2009, nobody needs this flag around so just remove it. Commit 1a381d4a0a9a ("arm64: remove no-op -p linker flag") did the same for arm64.

---
 arch/arm/Makefile                 |    2 +-
 arch/arm/boot/bootp/Makefile      |    2 +-
 arch/arm/boot/compressed/Makefile |    2 --
 3 files changed, 2 insertions(+), 4 deletions(-)

@@ -13,7 +13,7 @@
 # Ensure linker flags are correct
 LDFLAGS		:=
 
-LDFLAGS_vmlinux	:=-p --no-undefined -X --pic-veneer
+LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 LDFLAGS_MODULE	+= --be8

@@ -7,7 +7,7 @@
 
 GCOV_PROFILE	:= n
 
-LDFLAGS_bootp	:=-p --no-undefined -X \
+LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T
 AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"

@@ -122,8 +122,6 @@ endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-# ?
-LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
 LDFLAGS_vmlinux += --no-undefined
 # Delete all temporary local symbols

From: Oliver Neukum <[email protected]>

commit 397430b50a363d8b7bdda00522123f82df6adc5e upstream.

maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up.

V2: fixed typo in log and stylistic issues

---
 drivers/net/usb/usbnet.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -1730,6 +1730,10 @@ usbnet_probe (struct usb_interface *udev
 	if (!dev->rx_urb_size)
 		dev->rx_urb_size = dev->hard_mtu;
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
+	if (dev->maxpacket == 0) {
+		/* that is a broken device */
+		goto out4;
+	}
 
 	/* let userspace know we have a random address */
 	if (ether_addr_equal(net->dev_addr, node_id))

From: Wang Hai <[email protected]>

commit 6f7c88691191e6c52ef2543d6f1da8d360b27a24 upstream.

Return error code if usb_maxpacket() returns 0 in usbnet_probe()

---
 drivers/net/usb/usbnet.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1732,6 +1732,7 @@ usbnet_probe (struct usb_interface *udev
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
 	if (dev->maxpacket == 0) {
 		/* that is a broken device */
+		status = -ENODEV;
 		goto out4;
 	}
 

From: Zheyu Ma <[email protected]>

commit a0023bb9dd9bc439d44604eeec62426a990054cd upstream.

mv_init_host() propagates the value returned by mv_chip_id() which in turn gets propagated by mv_pci_init_one() and hits local_pci_probe().

During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success.

Since this is a bug rather than a recoverable runtime error we should use dev_alert() instead of dev_err().

---
 drivers/ata/sata_mv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -3909,8 +3909,8 @@ static int mv_chip_id(struct ata_host *h
 		break;
 
 	default:
-		dev_err(host->dev, "BUG: invalid board index %u\n", board_idx);
-		return 1;
+		dev_alert(host->dev, "BUG: invalid board index %u\n", board_idx);
+		return -EINVAL;
 	}
 
 	hpriv->hp_flags = hp_flags;

From: Krzysztof Kozlowski <[email protected]>

commit 2195f2062e4cc93870da8e71c318ef98a1c51cef upstream.

During probing, the driver tries to get a list (mask) of supported command types in port100_get_command_type_mask() function. The value is u64 and 0 is treated as invalid mask (no commands supported). The function however returns also -ERRNO as u64 which will be interpret as valid command mask.

Return 0 on every error case of port100_get_command_type_mask(), so the probing will stop.

---
 drivers/nfc/port100.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -936,11 +936,11 @@ static u64 port100_get_command_type_mask
 
 	skb = port100_alloc_skb(dev, 0);
 	if (!skb)
-		return -ENOMEM;
+		return 0;
 
 	resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb);
 	if (IS_ERR(resp))
-		return PTR_ERR(resp);
+		return 0;
 
 	if (resp->len < 8)
 		mask = 0;

This is the start of the stable review cycle for the 4.4.291 release. There are 17 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 03 Nov 2021 08:24:20 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.291-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.291-rc1

Xin Long <[email protected]>
sctp: add vtag check in sctp_sf_violation

Xin Long <[email protected]>
sctp: use init_tag from inithdr for ABORT chunk

Guenter Roeck <[email protected]>
nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST

Yang Yingliang <[email protected]>
regmap: Fix possible double-free in regcache_rbtree_exit()

Johan Hovold <[email protected]>
net: lan78xx: fix division by zero in send path

Shawn Guo <[email protected]>
mmc: sdhci: Map more voltage level to SDHCI_POWER_330

Jaehoon Chung <[email protected]>
mmc: dw_mmc: exynos: fix the finding clock sample value

Johan Hovold <[email protected]>
mmc: vub300: fix control-message timeouts

Pavel Skripkin <[email protected]>
Revert "net: mdiobus: Fix memory leak in __mdiobus_register"

Krzysztof Kozlowski <[email protected]>
nfc: port100: fix using -ERRNO as command type mask

Zheyu Ma <[email protected]>
ata: sata_mv: Fix the error handling of mv_chip_id()

Wang Hai <[email protected]>
usbnet: fix error return code in usbnet_probe()

Oliver Neukum <[email protected]>
usbnet: sanity check for maxpacket

Nathan Chancellor <[email protected]>

    ARM: 8819/1: Remove '-p' from LDFLAGS

Arnd Bergmann <[email protected]>
ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype

Arnd Bergmann <[email protected]>
ARM: 9134/1: remove duplicate memcpy() definition

Nick Desaulniers <[email protected]>
ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned

-------------

Diffstat:

 Makefile                              |  4 ++--
 arch/arm/Makefile                     |  2 +-
 arch/arm/boot/bootp/Makefile          |  2 +-
 arch/arm/boot/compressed/Makefile     |  2 --
 arch/arm/boot/compressed/decompress.c |  3 +++
 arch/arm/mm/proc-macros.S             |  1 +
 arch/arm/probes/kprobes/core.c        |  2 +-
 arch/nios2/platform/Kconfig.platform  |  1 +
 drivers/ata/sata_mv.c                 |  4 ++--
 drivers/base/regmap/regcache-rbtree.c |  7 +++----
 drivers/mmc/host/dw_mmc-exynos.c      | 14 ++++++++++++++
 drivers/mmc/host/sdhci.c              |  6 ++++++
 drivers/mmc/host/vub300.c             | 18 +++++++++---------
 drivers/net/phy/mdio_bus.c            |  1 -
 drivers/net/usb/lan78xx.c             |  6 ++++++
 drivers/net/usb/usbnet.c              |  5 +++++
 drivers/nfc/port100.c                 |  4 ++--
 net/sctp/sm_statefuns.c               |  4 ++++
 18 files changed, 61 insertions(+), 25 deletions(-)

From: Pavel Skripkin <[email protected]>

commit 10eff1f5788b6ffac212c254e2f3666219576889 upstream.

This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e.

This patch is correct in the sense that we _should_ call device_put() in case of device_register() failure, but the problem in this code is more vast.

We need to set bus->state to UNMDIOBUS_REGISTERED before calling device_register() to correctly release the device in mdiobus_free(). This patch prevents us from doing it, since in case of device_register() failure put_device() will be called 2 times and it will cause UAF or something else.

Also, Reported-by: tag in revered commit was wrong, since syzbot reported different leak in same function.

---
 drivers/net/phy/mdio_bus.c |    1 -
 1 file changed, 1 deletion(-)

@@ -274,7 +274,6 @@ int __mdiobus_register(struct mii_bus *b
 	err = device_register(&bus->dev);
 	if (err) {
 		pr_err("mii_bus %s failed to register\n", bus->id);
-		put_device(&bus->dev);
 		return -EINVAL;
 	}
 

All tests passing for Tegra ...

Test results for stable-v4.4:

    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    30 tests:	30 pass, 0 fail

Linux version: 4.4.291-rc1-gd0c0f8a764f8
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra30-cardhu-a04

Jon

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Build results:

	total: 160 pass: 160 fail: 0
Qemu test results:
	total: 341 pass: 341 fail: 0

Guenter

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

NOTE:
With new gcc-11 toolchain arm builds failed.
The fix patch is under review [1].
Due to this reason not considering it as a kernel regression.
* arm, build
- gcc-11-defconfig FAILED

[1]
ARM: drop cc-option fallbacks for architecture selection
https://lore.kernel.org/linux-arm-kernel/[email protected]/

## Build
* kernel: 4.4.291-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.4.y
* git commit: d0c0f8a764f8c71b396535e71f1d3bd792f4b34d
* git describe: v4.4.290-18-gd0c0f8a764f8
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.290-18-gd0c0f8a764f8

## No regressions (compared to v4.4.290)

## No fixes (compared to v4.4.290)

## Test result summary
total: 45115, pass: 36135, fail: 217, skip: 7755, xfail: 1008

## Build Summary
* arm: 258 total, 207 passed, 51 failed
* arm64: 34 total, 34 passed, 0 failed
* i386: 18 total, 18 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 18 total, 18 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Hi!

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany