Skip to contentSkip to conversation

4.4.292-rc1 review

PATCH In review Greg Kroah-Hartman 6 participants 25 messages Nov 10, 2021 – Nov 12, 2021

Subsystems (2)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/19 scsi: core: Put LLD module refcnt after SCSI device is released

In reply to Greg Kroah-Hartman

From: Ming Lei <[email protected]>

commit f2b85040acec9a928b4eb1b57a989324e8e38d3f upstream.

SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler.

Make sure to put LLD module refcnt after SCSI device is released.

Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi.

---
 drivers/scsi/scsi.c       |    4 +++-
 drivers/scsi/scsi_sysfs.c |    9 +++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)
drivers/scsi/scsi.c +3 -1
@@ -936,8 +936,10 @@ EXPORT_SYMBOL(scsi_device_get);
  */
 void scsi_device_put(struct scsi_device *sdev)
 {
-	module_put(sdev->host->hostt->module);
+	struct module *mod = sdev->host->hostt->module;
+
 	put_device(&sdev->sdev_gendev);
+	module_put(mod);
 }
 EXPORT_SYMBOL(scsi_device_put);
 
drivers/scsi/scsi_sysfs.c +9 -0
@@ -396,9 +396,12 @@ static void scsi_device_dev_release_user
 	struct device *parent;
 	struct list_head *this, *tmp;
 	unsigned long flags;
+	struct module *mod;
 
 	sdev = container_of(work, struct scsi_device, ew.work);
 
+	mod = sdev->host->hostt->module;
+
 	scsi_dh_release_device(sdev);
 
 	parent = sdev->sdev_gendev.parent;
@@ -430,11 +433,17 @@ static void scsi_device_dev_release_user
 
 	if (parent)
 		put_device(parent);
+	module_put(mod);
 }
 
 static void scsi_device_dev_release(struct device *dev)
 {
 	struct scsi_device *sdp = to_scsi_device(dev);
+
+	/* Set module pointer as NULL in case of module unloading */
+	if (!try_module_get(sdp->host->hostt->module))
+		sdp->host->hostt->module = NULL;
+
 	execute_in_process_context(scsi_device_dev_release_usercontext,
 				   &sdp->ew);
 }
author maintainer
#10 lore raw

PATCH 10/19 isofs: Fix out of bound access for corrupted isofs image

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit e96a1866b40570b5950cda8602c2819189c62a48 upstream.

When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it.

---
 fs/isofs/inode.c |    2 ++
 1 file changed, 2 insertions(+)
fs/isofs/inode.c +2 -0
@@ -1268,6 +1268,8 @@ static int isofs_read_inode(struct inode
 
 	de = (struct iso_directory_record *) (bh->b_data + offset);
 	de_len = *(unsigned char *) de;
+	if (de_len < sizeof(struct iso_directory_record))
+		goto fail;
 
 	if (offset + de_len > bufsize) {
 		int frag1 = bufsize - offset;
author maintainer
#11 lore raw

PATCH 11/19 comedi: dt9812: fix DMA buffers on stack

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 536de747bc48262225889a533db6650731ab25d3 upstream.

USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail.

Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data.

Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is.

Fixes 63274cd7d38a ("Staging: comedi: add usb dt9812 driver")
Cc [email protected] # 2.6.29
---
 drivers/staging/comedi/drivers/dt9812.c |  115 +++++++++++++++++++++++---------
 1 file changed, 86 insertions(+), 29 deletions(-)
drivers/staging/comedi/drivers/dt9812.c +86 -29
@@ -41,6 +41,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
 
 #include "../comedi_usb.h"
@@ -246,22 +247,42 @@ static int dt9812_read_info(struct comed
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
+	size_t tbuf_size;
 	int count, ret;
+	void *tbuf;
 
-	cmd.cmd = cpu_to_le32(DT9812_R_FLASH_DATA);
-	cmd.u.flash_data_info.address =
+	tbuf_size = max(sizeof(*cmd), buf_size);
+
+	tbuf = kzalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	cmd = tbuf;
+
+	cmd->cmd = cpu_to_le32(DT9812_R_FLASH_DATA);
+	cmd->u.flash_data_info.address =
 	    cpu_to_le16(DT9812_DIAGS_BOARD_INFO_ADDR + offset);
-	cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size);
+	cmd->u.flash_data_info.numbytes = cpu_to_le16(buf_size);
 
 	/* DT9812 only responds to 32 byte writes!! */
 	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			   &cmd, 32, &count, DT9812_USB_TIMEOUT);
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
 	if (ret)
-		return ret;
+		goto out;
+
+	ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
+			   tbuf, buf_size, &count, DT9812_USB_TIMEOUT);
+	if (!ret) {
+		if (count == buf_size)
+			memcpy(buf, tbuf, buf_size);
+		else
+			ret = -EREMOTEIO;
+	}
+out:
+	kfree(tbuf);
 
-	return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
-			    buf, buf_size, &count, DT9812_USB_TIMEOUT);
+	return ret;
 }
 
 static int dt9812_read_multiple_registers(struct comedi_device *dev,
@@ -270,22 +291,42 @@ static int dt9812_read_multiple_register
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count, ret;
+	size_t buf_size;
+	void *buf;
+
+	buf_size = max_t(size_t, sizeof(*cmd), reg_count);
+
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	cmd = buf;
 
-	cmd.cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG);
-	cmd.u.read_multi_info.count = reg_count;
+	cmd->cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG);
+	cmd->u.read_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++)
-		cmd.u.read_multi_info.address[i] = address[i];
+		cmd->u.read_multi_info.address[i] = address[i];
 
 	/* DT9812 only responds to 32 byte writes!! */
 	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			   &cmd, 32, &count, DT9812_USB_TIMEOUT);
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
 	if (ret)
-		return ret;
+		goto out;
 
-	return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
-			    value, reg_count, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
+			   buf, reg_count, &count, DT9812_USB_TIMEOUT);
+	if (!ret) {
+		if (count == reg_count)
+			memcpy(value, buf, reg_count);
+		else
+			ret = -EREMOTEIO;
+	}
+out:
+	kfree(buf);
+
+	return ret;
 }
 
 static int dt9812_write_multiple_registers(struct comedi_device *dev,
@@ -294,19 +335,27 @@ static int dt9812_write_multiple_registe
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count;
+	int ret;
 
-	cmd.cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG);
-	cmd.u.read_multi_info.count = reg_count;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG);
+	cmd->u.read_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++) {
-		cmd.u.write_multi_info.write[i].address = address[i];
-		cmd.u.write_multi_info.write[i].value = value[i];
+		cmd->u.write_multi_info.write[i].address = address[i];
+		cmd->u.write_multi_info.write[i].value = value[i];
 	}
 
 	/* DT9812 only responds to 32 byte writes!! */
-	return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			    &cmd, 32, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
+	kfree(cmd);
+
+	return ret;
 }
 
 static int dt9812_rmw_multiple_registers(struct comedi_device *dev,
@@ -315,17 +364,25 @@ static int dt9812_rmw_multiple_registers
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count;
+	int ret;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
 
-	cmd.cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG);
-	cmd.u.rmw_multi_info.count = reg_count;
+	cmd->cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG);
+	cmd->u.rmw_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++)
-		cmd.u.rmw_multi_info.rmw[i] = rmw[i];
+		cmd->u.rmw_multi_info.rmw[i] = rmw[i];
 
 	/* DT9812 only responds to 32 byte writes!! */
-	return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			    &cmd, 32, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
+	kfree(cmd);
+
+	return ret;
 }
 
 static int dt9812_digital_in(struct comedi_device *dev, u8 *bits)
author maintainer
#12 lore raw

PATCH 12/19 comedi: ni_usb6501: fix NULL-deref in command paths

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 907767da8f3a925b060c740e0b5c92ea7dbec440 upstream.

The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing).

Add the missing sanity checks to probe().

Fixes a03bb00e50ab ("staging: comedi: add NI USB-6501 support")
Cc Luca Ellero <[email protected]>
---
 drivers/staging/comedi/drivers/ni_usb6501.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/staging/comedi/drivers/ni_usb6501.c +10 -0
@@ -153,6 +153,10 @@ static const u8 READ_COUNTER_RESPONSE[]
 					   0x00, 0x00, 0x00, 0x02,
 					   0x00, 0x00, 0x00, 0x00};
 
+/* Largest supported packets */
+static const size_t TX_MAX_SIZE	= sizeof(SET_PORT_DIR_REQUEST);
+static const size_t RX_MAX_SIZE	= sizeof(READ_PORT_RESPONSE);
+
 enum commands {
 	READ_PORT,
 	WRITE_PORT,
@@ -510,6 +514,12 @@ static int ni6501_find_endpoints(struct
 	if (!devpriv->ep_rx || !devpriv->ep_tx)
 		return -ENODEV;
 
+	if (usb_endpoint_maxp(devpriv->ep_rx) < RX_MAX_SIZE)
+		return -ENODEV;
+
+	if (usb_endpoint_maxp(devpriv->ep_tx) < TX_MAX_SIZE)
+		return -ENODEV;
+
 	return 0;
 }
 
author maintainer
#13 lore raw

PATCH 13/19 staging: comedi: drivers: replace le16_to_cpu() with usb_endpoint_maxp()

In reply to Greg Kroah-Hartman

From: Cheah Kok Cheong <[email protected]>

commit 62190d498c1d1cee970176840f24822fc14d27d1 upstream.

Use macro introduced in commit 939f325f4a0f
("usb: add usb_endpoint_maxp() macro")

---
 drivers/staging/comedi/drivers/dt9812.c     |    4 ++--
 drivers/staging/comedi/drivers/ni_usb6501.c |    4 ++--
 drivers/staging/comedi/drivers/vmk80xx.c    |   12 ++++++------
 3 files changed, 10 insertions(+), 10 deletions(-)
drivers/staging/comedi/drivers/dt9812.c +2 -2
@@ -717,12 +717,12 @@ static int dt9812_find_endpoints(struct
 		case 1:
 			dir = USB_DIR_OUT;
 			devpriv->cmd_wr.addr = ep->bEndpointAddress;
-			devpriv->cmd_wr.size = le16_to_cpu(ep->wMaxPacketSize);
+			devpriv->cmd_wr.size = usb_endpoint_maxp(ep);
 			break;
 		case 2:
 			dir = USB_DIR_IN;
 			devpriv->cmd_rd.addr = ep->bEndpointAddress;
-			devpriv->cmd_rd.size = le16_to_cpu(ep->wMaxPacketSize);
+			devpriv->cmd_rd.size = usb_endpoint_maxp(ep);
 			break;
 		case 3:
 			/* unused write stream */
drivers/staging/comedi/drivers/ni_usb6501.c +2 -2
@@ -469,12 +469,12 @@ static int ni6501_alloc_usb_buffers(stru
 	struct ni6501_private *devpriv = dev->private;
 	size_t size;
 
-	size = le16_to_cpu(devpriv->ep_rx->wMaxPacketSize);
+	size = usb_endpoint_maxp(devpriv->ep_rx);
 	devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_rx_buf)
 		return -ENOMEM;
 
-	size = le16_to_cpu(devpriv->ep_tx->wMaxPacketSize);
+	size = usb_endpoint_maxp(devpriv->ep_tx);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;
drivers/staging/comedi/drivers/vmk80xx.c +6 -6
@@ -177,7 +177,7 @@ static void vmk80xx_do_bulk_msg(struct c
 	 * The max packet size attributes of the K8061
 	 * input/output endpoints are identical
 	 */
-	size = le16_to_cpu(devpriv->ep_tx->wMaxPacketSize);
+	size = usb_endpoint_maxp(devpriv->ep_tx);
 
 	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
 		     size, NULL, devpriv->ep_tx->bInterval);
@@ -199,7 +199,7 @@ static int vmk80xx_read_packet(struct co
 	ep = devpriv->ep_rx;
 	pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
-				 le16_to_cpu(ep->wMaxPacketSize), NULL,
+				 usb_endpoint_maxp(ep), NULL,
 				 HZ * 10);
 }
 
@@ -220,7 +220,7 @@ static int vmk80xx_write_packet(struct c
 	ep = devpriv->ep_tx;
 	pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
-				 le16_to_cpu(ep->wMaxPacketSize), NULL,
+				 usb_endpoint_maxp(ep), NULL,
 				 HZ * 10);
 }
 
@@ -230,7 +230,7 @@ static int vmk80xx_reset_device(struct c
 	size_t size;
 	int retval;
 
-	size = le16_to_cpu(devpriv->ep_tx->wMaxPacketSize);
+	size = usb_endpoint_maxp(devpriv->ep_tx);
 	memset(devpriv->usb_tx_buf, 0, size);
 	retval = vmk80xx_write_packet(dev, VMK8055_CMD_RST);
 	if (retval)
@@ -687,12 +687,12 @@ static int vmk80xx_alloc_usb_buffers(str
 	struct vmk80xx_private *devpriv = dev->private;
 	size_t size;
 
-	size = le16_to_cpu(devpriv->ep_rx->wMaxPacketSize);
+	size = usb_endpoint_maxp(devpriv->ep_rx);
 	devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_rx_buf)
 		return -ENOMEM;
 
-	size = le16_to_cpu(devpriv->ep_tx->wMaxPacketSize);
+	size = usb_endpoint_maxp(devpriv->ep_tx);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;
author maintainer
#14 lore raw

PATCH 14/19 comedi: vmk80xx: fix transfer-buffer overflows

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit a23461c47482fc232ffc9b819539d1f837adf2b1 upstream.

The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes.

Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize.

Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing.

The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize.

Fixes 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc [email protected] # 2.6.31
---
 drivers/staging/comedi/drivers/vmk80xx.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/staging/comedi/drivers/vmk80xx.c +4 -2
@@ -99,6 +99,8 @@ enum {
 #define IC3_VERSION		BIT(0)
 #define IC6_VERSION		BIT(1)
 
+#define MIN_BUF_SIZE		64
+
 enum vmk80xx_model {
 	VMK8055_MODEL,
 	VMK8061_MODEL
@@ -687,12 +689,12 @@ static int vmk80xx_alloc_usb_buffers(str
 	struct vmk80xx_private *devpriv = dev->private;
 	size_t size;
 
-	size = usb_endpoint_maxp(devpriv->ep_rx);
+	size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
 	devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_rx_buf)
 		return -ENOMEM;
 
-	size = usb_endpoint_maxp(devpriv->ep_tx);
+	size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;
author maintainer
#15 lore raw

PATCH 15/19 comedi: vmk80xx: fix bulk-buffer overflow

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 78cdfd62bd54af615fba9e3ca1ba35de39d3871d upstream.

The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers.

Fixes 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc [email protected] # 2.6.31
---
 drivers/staging/comedi/drivers/vmk80xx.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/staging/comedi/drivers/vmk80xx.c +7 -9
@@ -168,22 +168,20 @@ static void vmk80xx_do_bulk_msg(struct c
 	__u8 rx_addr;
 	unsigned int tx_pipe;
 	unsigned int rx_pipe;
-	size_t size;
+	size_t tx_size;
+	size_t rx_size;
 
 	tx_addr = devpriv->ep_tx->bEndpointAddress;
 	rx_addr = devpriv->ep_rx->bEndpointAddress;
 	tx_pipe = usb_sndbulkpipe(usb, tx_addr);
 	rx_pipe = usb_rcvbulkpipe(usb, rx_addr);
-
-	/*
-	 * The max packet size attributes of the K8061
-	 * input/output endpoints are identical
-	 */
-	size = usb_endpoint_maxp(devpriv->ep_tx);
+	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
+	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
 	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     size, NULL, devpriv->ep_tx->bInterval);
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, size, NULL, HZ * 10);
+		     tx_size, NULL, devpriv->ep_tx->bInterval);
+
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)
author maintainer
#16 lore raw

PATCH 16/19 comedi: vmk80xx: fix bulk and interrupt message timeouts

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit a56d3e40bda460edf3f8d6aac00ec0b322b4ab83 upstream.

USB bulk and interrupt message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint bInterval value, which should be ignored for bulk endpoints and is typically set to zero. This meant that a failing bulk-out transfer would never time out.

Assume that the 10 second timeout used for all other transfers is more than enough also for the bulk-out endpoint.

Fixes 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc [email protected] # 2.6.31
---
 drivers/staging/comedi/drivers/vmk80xx.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/staging/comedi/drivers/vmk80xx.c +7 -5
@@ -100,6 +100,7 @@ enum {
 #define IC6_VERSION		BIT(1)
 
 #define MIN_BUF_SIZE		64
+#define PACKET_TIMEOUT		10000	/* ms */
 
 enum vmk80xx_model {
 	VMK8055_MODEL,
@@ -178,10 +179,11 @@ static void vmk80xx_do_bulk_msg(struct c
 	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
 	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
-	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     tx_size, NULL, devpriv->ep_tx->bInterval);
+	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL,
+		     PACKET_TIMEOUT);
 
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL,
+		     PACKET_TIMEOUT);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)
@@ -200,7 +202,7 @@ static int vmk80xx_read_packet(struct co
 	pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
@@ -221,7 +223,7 @@ static int vmk80xx_write_packet(struct c
 	pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_reset_device(struct comedi_device *dev)
author maintainer
#17 lore raw

PATCH 17/19 staging: r8712u: fix control-message timeout

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit ce4940525f36ffdcf4fa623bcedab9c2a6db893a upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Fixes 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc [email protected] # 2.6.37
---
 drivers/staging/rtl8712/usb_ops_linux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8712/usb_ops_linux.c +1 -1
@@ -511,7 +511,7 @@ int r8712_usbctrl_vendorreq(struct intf_
 		memcpy(pIo_buf, pdata, len);
 	}
 	status = usb_control_msg(udev, pipe, request, reqtype, value, index,
-				 pIo_buf, len, HZ / 2);
+				 pIo_buf, len, 500);
 	if (status > 0) {  /* Success this control transfer. */
 		if (requesttype == 0x01) {
 			/* For Control read transfer, we have to copy the read
author maintainer
#18 lore raw

PATCH 18/19 staging: rtl8192u: fix control-message timeouts

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 4cfa36d312d6789448b59a7aae770ac8425017a3 upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Fixes 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Cc [email protected] # 2.6.33
---
 drivers/staging/rtl8192u/r8192U_core.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8192u/r8192U_core.c +9 -9
@@ -267,7 +267,7 @@ void write_nic_byte_E(struct net_device
 
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0)
@@ -287,7 +287,7 @@ int read_nic_byte_E(struct net_device *d
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -314,7 +314,7 @@ void write_nic_byte(struct net_device *d
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0)
@@ -340,7 +340,7 @@ void write_nic_word(struct net_device *d
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	kfree(usbdata);
 
 	if (status < 0)
@@ -365,7 +365,7 @@ void write_nic_dword(struct net_device *
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	kfree(usbdata);
 
 
@@ -390,7 +390,7 @@ int read_nic_byte(struct net_device *dev
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -417,7 +417,7 @@ int read_nic_word(struct net_device *dev
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -441,7 +441,7 @@ static int read_nic_word_E(struct net_de
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 2, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -467,7 +467,7 @@ int read_nic_dword(struct net_device *de
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
author maintainer
#19 lore raw

PATCH 19/19 rsi: fix control-message timeout

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 541fd20c3ce5b0bc39f0c6a52414b6b92416831c upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Use the common control-message timeout define for the five-second timeout.

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/rsi/rsi_91x_usb.c +1 -1
@@ -42,7 +42,7 @@ static int rsi_usb_card_write(struct rsi
 			      buf,
 			      len,
 			      &transfer,
-			      HZ * 5);
+			      USB_CTRL_SET_TIMEOUT);
 
 	if (status < 0) {
 		rsi_dbg(ERR_ZONE,
author maintainer
#2 lore raw

PATCH 2/19 ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"

In reply to Greg Kroah-Hartman

From: Wang Kefeng <[email protected]>

commit eb4f756915875b0ea0757751cd29841f0504d547 upstream.

After commit 77a7300abad7 ("of/irq: Get rid of NO_IRQ usage"), no irq case has been removed, irq_of_parse_and_map() will return 0 in all cases when get error from parse and map an interrupt into linux virq space.

amba_device_register() is only used on no-DT initialization, see
s3c64xx_pl080_init() arch/arm/mach-s3c/pl080.c
ep93xx_init_devices() arch/arm/mach-ep93xx/core.c

They won't set -1 to irq[0], so no need the warn.

This reverts commit 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3.

---
 drivers/amba/bus.c |    3 ---
 1 file changed, 3 deletions(-)
drivers/amba/bus.c +0 -3
@@ -360,9 +360,6 @@ int amba_device_add(struct amba_device *
 	void __iomem *tmp;
 	int i, ret;
 
-	WARN_ON(dev->irq[0] == (unsigned int)-1);
-	WARN_ON(dev->irq[1] == (unsigned int)-1);
-
 	ret = request_resource(parent, &dev->res);
 	if (ret)
 		goto err_out;
author maintainer
#3 lore raw

PATCH 3/19 net: hso: register netdev later to avoid a race condition

In reply to Greg Kroah-Hartman

From: Andreas Kemnade <[email protected]>

commit 4c761daf8bb9a2cbda9facf53ea85d9061f4281e upstream.

If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized.

This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus.

A backtrace is the following:

[ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap
[ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
[ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem
[ 1357.574096] usb 1-2: Manufacturer: Option N.V.
[ 1357.685882] hso 1-2:1.5: Not our interface
[ 1460.886352] hso: unloaded
[ 1460.889984] usbcore: deregistering interface driver hso
[ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless
[ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030
[ 1513.887664] hso 1-2:1.5: Not our interface
[ 1513.906890] usbcore: registered new interface driver hso
[ 1513.937988] pgd = ecdec000
[ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000
[ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
[ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007
[ 1514.037384]  bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso]
[ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G        W       4.11.0-rc8-letux+ #1
[ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 1514.077758] task: ee748240 task.stack: ecdd6000
[ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso]
[ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso]
[ 1514.093231] pc : [<bf79c304>]    lr : [<bf79ced8>]    psr: a00f0013
sp : ecdd7e20  ip : 00000000  fp : ffffffff
[ 1514.105316] r10: 00000000  r9 : ed0e080c  r8 : ecd8fe2c
[ 1514.110839] r7 : bf79cef4  r6 : ecd8fe00  r5 : 00000000  r4 : ed0dbd80
[ 1514.117706] r3 : 00000000  r2 : c0020c80  r1 : 00000000  r0 : ecdb7800
[ 1514.124572] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[ 1514.132110] Control: 10c5387d  Table: acdec019  DAC: 00000051
[ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218)
[ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000)
[ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000
[ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958
[ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090
[ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800
[ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000
[ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914
[ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948
[ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654
[ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0
[ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240
[ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000
[ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4
[ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091
[ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858
[ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000
[ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso])
[ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4)
[ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130)
[ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48)
[ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714)
[ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308)
[ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34)
[ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c)
[ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74)
[ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c)
[ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030)
[ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]---
---
 drivers/net/usb/hso.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/usb/hso.c +7 -7
@@ -2546,13 +2546,6 @@ static struct hso_device *hso_create_net
 	SET_NETDEV_DEV(net, &interface->dev);
 	SET_NETDEV_DEVTYPE(net, &hso_type);
 
-	/* registering our net device */
-	result = register_netdev(net);
-	if (result) {
-		dev_err(&interface->dev, "Failed to register device\n");
-		goto exit;
-	}
-
 	/* start allocating */
 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
 		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
@@ -2576,6 +2569,13 @@ static struct hso_device *hso_create_net
 
 	add_net_device(hso_dev);
 
+	/* registering our net device */
+	result = register_netdev(net);
+	if (result) {
+		dev_err(&interface->dev, "Failed to register device\n");
+		goto exit;
+	}
+
 	hso_log_port(hso_dev);
 
 	hso_create_rfkill(hso_dev, interface);
author maintainer
#4 lore raw

PATCH 4/19 IB/qib: Use struct_size() helper

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

commit 829ca44ecf60e9b6f83d0161a6ef10c1304c5060 upstream.

Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used.

So, replace the following form:

sizeof(*pkt) + sizeof(pkt->addr[0])*n

with:

struct_size(pkt, addr, n)

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.

---
 drivers/infiniband/hw/qib/qib_user_sdma.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/infiniband/hw/qib/qib_user_sdma.c +4 -2
@@ -41,6 +41,7 @@
 #include <linux/rbtree.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
+#include <linux/overflow.h>
 
 #include "qib.h"
 #include "qib_user_sdma.h"
@@ -908,10 +909,11 @@ static int qib_user_sdma_queue_pkts(cons
 		}
 
 		if (frag_size) {
-			int pktsize, tidsmsize, n;
+			int tidsmsize, n;
+			size_t pktsize;
 
 			n = npages*((2*PAGE_SIZE/frag_size)+1);
-			pktsize = sizeof(*pkt) + sizeof(pkt->addr[0])*n;
+			pktsize = struct_size(pkt, addr, n);
 
 			/*
 			 * Determine if this is tid-sdma or just sdma.
author maintainer
#5 lore raw

PATCH 5/19 IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

commit d39bf40e55e666b5905fdbd46a0dced030ce87be upstream.

Overflowing either addrlimit or bytes_togo can allow userspace to trigger a buffer overflow of kernel memory. Check for overflows in all the places doing math on user controlled buffers.

---
 drivers/infiniband/hw/qib/qib_user_sdma.c |   33 ++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
drivers/infiniband/hw/qib/qib_user_sdma.c +23 -10
@@ -607,7 +607,7 @@ done:
 /*
  * How many pages in this iovec element?
  */
-static int qib_user_sdma_num_pages(const struct iovec *iov)
+static size_t qib_user_sdma_num_pages(const struct iovec *iov)
 {
 	const unsigned long addr  = (unsigned long) iov->iov_base;
 	const unsigned long  len  = iov->iov_len;
@@ -663,7 +663,7 @@ static void qib_user_sdma_free_pkt_frag(
 static int qib_user_sdma_pin_pages(const struct qib_devdata *dd,
 				   struct qib_user_sdma_queue *pq,
 				   struct qib_user_sdma_pkt *pkt,
-				   unsigned long addr, int tlen, int npages)
+				   unsigned long addr, int tlen, size_t npages)
 {
 	struct page *pages[8];
 	int i, j;
@@ -727,7 +727,7 @@ static int qib_user_sdma_pin_pkt(const s
 	unsigned long idx;
 
 	for (idx = 0; idx < niov; idx++) {
-		const int npages = qib_user_sdma_num_pages(iov + idx);
+		const size_t npages = qib_user_sdma_num_pages(iov + idx);
 		const unsigned long addr = (unsigned long) iov[idx].iov_base;
 
 		ret = qib_user_sdma_pin_pages(dd, pq, pkt, addr,
@@ -829,8 +829,8 @@ static int qib_user_sdma_queue_pkts(cons
 		unsigned pktnw;
 		unsigned pktnwc;
 		int nfrags = 0;
-		int npages = 0;
-		int bytes_togo = 0;
+		size_t npages = 0;
+		size_t bytes_togo = 0;
 		int tiddma = 0;
 		int cfur;
 
@@ -890,7 +890,11 @@ static int qib_user_sdma_queue_pkts(cons
 
 			npages += qib_user_sdma_num_pages(&iov[idx]);
 
-			bytes_togo += slen;
+			if (check_add_overflow(bytes_togo, slen, &bytes_togo) ||
+			    bytes_togo > type_max(typeof(pkt->bytes_togo))) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
 			pktnwc += slen >> 2;
 			idx++;
 			nfrags++;
@@ -909,8 +913,7 @@ static int qib_user_sdma_queue_pkts(cons
 		}
 
 		if (frag_size) {
-			int tidsmsize, n;
-			size_t pktsize;
+			size_t tidsmsize, n, pktsize, sz, addrlimit;
 
 			n = npages*((2*PAGE_SIZE/frag_size)+1);
 			pktsize = struct_size(pkt, addr, n);
@@ -928,14 +931,24 @@ static int qib_user_sdma_queue_pkts(cons
 			else
 				tidsmsize = 0;
 
-			pkt = kmalloc(pktsize+tidsmsize, GFP_KERNEL);
+			if (check_add_overflow(pktsize, tidsmsize, &sz)) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
+			pkt = kmalloc(sz, GFP_KERNEL);
 			if (!pkt) {
 				ret = -ENOMEM;
 				goto free_pbc;
 			}
 			pkt->largepkt = 1;
 			pkt->frag_size = frag_size;
-			pkt->addrlimit = n + ARRAY_SIZE(pkt->addr);
+			if (check_add_overflow(n, ARRAY_SIZE(pkt->addr),
+					       &addrlimit) ||
+			    addrlimit > type_max(typeof(pkt->addrlimit))) {
+				ret = -EINVAL;
+				goto free_pbc;
+			}
+			pkt->addrlimit = addrlimit;
 
 			if (tiddma) {
 				char *tidsm = (char *)pkt + pktsize;
author maintainer
#6 lore raw

PATCH 6/19 usb: gadget: Mark USB_FSL_QE broken on 64-bit

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

commit a0548b26901f082684ad1fb3ba397d2de3a1406a upstream.

On 64-bit:

drivers/usb/gadget/udc/fsl_qe_udc.c: In function ‘qe_ep0_rx’:
drivers/usb/gadget/udc/fsl_qe_udc.c:842:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
842 | vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
| ^
In file included from drivers/usb/gadget/udc/fsl_qe_udc.c:41:
drivers/usb/gadget/udc/fsl_qe_udc.c:843:28: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
843 | frame_set_data(pframe, (u8 *)vaddr);
| ^

The driver assumes physical and virtual addresses are 32-bit, hence it cannot work on 64-bit platforms.

---
 drivers/usb/gadget/udc/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/gadget/udc/Kconfig +1 -0
@@ -265,6 +265,7 @@ config USB_AMD5536UDC
 config USB_FSL_QE
 	tristate "Freescale QE/CPM USB Device Controller"
 	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	depends on !64BIT || BROKEN
 	help
 	   Some of Freescale PowerPC processors have a Full Speed
 	   QE/CPM2 USB controller, which support device mode with 4
author maintainer
#7 lore raw

PATCH 7/19 usb-storage: Add compatibility quirk flags for iODD 2531/2541

In reply to Greg Kroah-Hartman

From: James Buren <[email protected]>

commit 05c8f1b67e67dcd786ae3fe44492bbc617b4bd12 upstream.

These drive enclosures have firmware bugs that make it impossible to mount a new virtual ISO image after Linux ejects the old one if the device is locked by Linux. Windows bypasses this problem by the fact that they do not lock the device. Add a quirk to disable device locking for these drive enclosures.

---
 drivers/usb/storage/unusual_devs.h |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/usb/storage/unusual_devs.h +10 -0
@@ -311,6 +311,16 @@ UNUSUAL_DEV(  0x045e, 0xffff, 0x0000, 0x
 		US_FL_MAX_SECTORS_64 ),
 
 /*
+ * Reported by James Buren <[email protected]>
+ * Virtual ISOs cannot be remounted if ejected while the device is locked
+ * Disable locking to mimic Windows behavior that bypasses the issue
+ */
+UNUSUAL_DEV(  0x04c5, 0x2028, 0x0001, 0x0001,
+		"iODD",
+		"2531/2541",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE),
+
+/*
  * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
  * Reported by Pete Zaitcev <[email protected]>
  * This device chokes on both version of MODE SENSE which we have, so
author maintainer
#8 lore raw

PATCH 8/19 printk/console: Allow to disable console output by using console="" or console=null

In reply to Greg Kroah-Hartman

From: Petr Mladek <[email protected]>

commit 3cffa06aeef7ece30f6b5ac0ea51f264e8fea4d0 upstream.

The commit 48021f98130880dd74 ("printk: handle blank console arguments passed in.") prevented crash caused by empty console= parameter value.

Unfortunately, this value is widely used on Chromebooks to disable the console output. The above commit caused performance regression because the messages were pushed on slow console even though nobody was watching it.

Use ttynull driver explicitly for console="" and console=null parameters. It has been created for exactly this purpose.

It causes that preferred_console is set. As a result, ttySX and ttyX are not used as a fallback. And only ttynull console gets registered by default.

It still allows to register other consoles either by additional console= parameters or SPCR. It prevents regression because it worked this way even before. Also it is a sane semantic. Preventing output on all consoles should be done another way, for example, by introducing mute_console parameter.

---
 kernel/printk/printk.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
kernel/printk/printk.c +8 -1
@@ -2032,8 +2032,15 @@ static int __init console_setup(char *st
 	char *s, *options, *brl_options = NULL;
 	int idx;
 
-	if (str[0] == 0)
+	/*
+	 * console="" or console=null have been suggested as a way to
+	 * disable console output. Use ttynull that has been created
+	 * for exacly this purpose.
+	 */
+	if (str[0] == 0 || strcmp(str, "null") == 0) {
+		__add_preferred_console("ttynull", 0, NULL, NULL);
 		return 1;
+	}
 
 	if (_braille_console_setup(&str, &brl_options))
 		return 1;
author maintainer
#9 lore raw

PATCH 9/19 usb: hso: fix error handling code of hso_create_net_device

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

commit a6ecfb39ba9d7316057cea823b196b734f6b18ca upstream.

The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1].

Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code.

[1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe

Reported-by [email protected]
Fixes 5fcfb6d0bfcd ("hso: fix bailout in error case of probe")
---
 drivers/net/usb/hso.c |   33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
drivers/net/usb/hso.c +23 -10
@@ -2522,7 +2522,7 @@ static struct hso_device *hso_create_net
 			   hso_net_init);
 	if (!net) {
 		dev_err(&interface->dev, "Unable to create ethernet device\n");
-		goto exit;
+		goto err_hso_dev;
 	}
 
 	hso_net = netdev_priv(net);
@@ -2535,13 +2535,13 @@ static struct hso_device *hso_create_net
 				      USB_DIR_IN);
 	if (!hso_net->in_endp) {
 		dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
-		goto exit;
+		goto err_net;
 	}
 	hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
 				       USB_DIR_OUT);
 	if (!hso_net->out_endp) {
 		dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
-		goto exit;
+		goto err_net;
 	}
 	SET_NETDEV_DEV(net, &interface->dev);
 	SET_NETDEV_DEVTYPE(net, &hso_type);
@@ -2551,21 +2551,21 @@ static struct hso_device *hso_create_net
 		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
 		if (!hso_net->mux_bulk_rx_urb_pool[i]) {
 			dev_err(&interface->dev, "Could not allocate rx urb\n");
-			goto exit;
+			goto err_mux_bulk_rx;
 		}
 		hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
 							   GFP_KERNEL);
 		if (!hso_net->mux_bulk_rx_buf_pool[i])
-			goto exit;
+			goto err_mux_bulk_rx;
 	}
 	hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!hso_net->mux_bulk_tx_urb) {
 		dev_err(&interface->dev, "Could not allocate tx urb\n");
-		goto exit;
+		goto err_mux_bulk_rx;
 	}
 	hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
 	if (!hso_net->mux_bulk_tx_buf)
-		goto exit;
+		goto err_free_tx_urb;
 
 	add_net_device(hso_dev);
 
@@ -2573,7 +2573,7 @@ static struct hso_device *hso_create_net
 	result = register_netdev(net);
 	if (result) {
 		dev_err(&interface->dev, "Failed to register device\n");
-		goto exit;
+		goto err_free_tx_buf;
 	}
 
 	hso_log_port(hso_dev);
@@ -2581,8 +2581,21 @@ static struct hso_device *hso_create_net
 	hso_create_rfkill(hso_dev, interface);
 
 	return hso_dev;
-exit:
-	hso_free_net_device(hso_dev);
+
+err_free_tx_buf:
+	remove_net_device(hso_dev);
+	kfree(hso_net->mux_bulk_tx_buf);
+err_free_tx_urb:
+	usb_free_urb(hso_net->mux_bulk_tx_urb);
+err_mux_bulk_rx:
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
+	}
+err_net:
+	free_netdev(net);
+err_hso_dev:
+	kfree(hso_dev);
 	return NULL;
 }
 

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.4.292-rc1 review

This is the start of the stable review cycle for the 4.4.292 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.292-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.292-rc1

Johan Hovold <[email protected]>
rsi: fix control-message timeout

Johan Hovold <[email protected]>
staging: rtl8192u: fix control-message timeouts

Johan Hovold <[email protected]>
staging: r8712u: fix control-message timeout

Johan Hovold <[email protected]>

    comedi: vmk80xx: fix bulk and interrupt message timeouts

Johan Hovold <[email protected]>

    comedi: vmk80xx: fix bulk-buffer overflow

Johan Hovold <[email protected]>

    comedi: vmk80xx: fix transfer-buffer overflows

Cheah Kok Cheong <[email protected]>
staging: comedi: drivers: replace le16_to_cpu() with usb_endpoint_maxp()

Johan Hovold <[email protected]>
comedi: ni_usb6501: fix NULL-deref in command paths

Johan Hovold <[email protected]>
comedi: dt9812: fix DMA buffers on stack

Jan Kara <[email protected]>
isofs: Fix out of bound access for corrupted isofs image

Dongliang Mu <[email protected]>
usb: hso: fix error handling code of hso_create_net_device

Petr Mladek <[email protected]>
printk/console: Allow to disable console output by using console="" or console=null

James Buren <[email protected]>
usb-storage: Add compatibility quirk flags for iODD 2531/2541

Geert Uytterhoeven <[email protected]>
usb: gadget: Mark USB_FSL_QE broken on 64-bit

Mike Marciniszyn <[email protected]>
IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields

Gustavo A. R. Silva <[email protected]>
IB/qib: Use struct_size() helper

Andreas Kemnade <[email protected]>
net: hso: register netdev later to avoid a race condition

Wang Kefeng <[email protected]>
ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"

Ming Lei <[email protected]>
scsi: core: Put LLD module refcnt after SCSI device is released

-------------

Diffstat:

 Makefile                                    |   4 +-
 drivers/amba/bus.c                          |   3 -
 drivers/infiniband/hw/qib/qib_user_sdma.c   |  35 +++++---
 drivers/net/usb/hso.c                       |  45 +++++++----
 drivers/net/wireless/rsi/rsi_91x_usb.c      |   2 +-
 drivers/scsi/scsi.c                         |   4 +-
 drivers/scsi/scsi_sysfs.c                   |   9 +++
 drivers/staging/comedi/drivers/dt9812.c     | 119 ++++++++++++++++++++--------
 drivers/staging/comedi/drivers/ni_usb6501.c |  14 +++-
 drivers/staging/comedi/drivers/vmk80xx.c    |  34 ++++----
 drivers/staging/rtl8192u/r8192U_core.c      |  18 ++---
 drivers/staging/rtl8712/usb_ops_linux.c     |   2 +-
 drivers/usb/gadget/udc/Kconfig              |   1 +
 drivers/usb/storage/unusual_devs.h          |  10 +++
 fs/isofs/inode.c                            |   2 +
 kernel/printk/printk.c                      |   9 ++-
 16 files changed, 218 insertions(+), 93 deletions(-)
Tested-by on the v1 series
#20 lore raw

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 4.4.292 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Tested-by Linux Kernel Functional Testing on the v1 series
#21 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.292 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.292-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 4.4.292-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.4.y
* git commit: 17cdd7c2c6dc2863ed141af8f99ff09851164bc6
* git describe: v4.4.291-20-g17cdd7c2c6dc
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.291-20-g17cdd7c2c6dc

## No regressions (compared to v4.4.291-3-g59c6c12a4647)

## No fixes (compared to v4.4.291-3-g59c6c12a4647)

## Test result summary
total: 38927, pass: 30852, fail: 150, skip: 6960, xfail: 965

## Build Summary
* arm: 129 total, 106 passed, 23 failed
* arm64: 34 total, 34 passed, 0 failed
* i386: 18 total, 18 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 18 total, 18 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Tested-by on the v1 series
#22 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.292 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.292-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested-by on the v1 series
#23 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.292 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

Build results:

	total: 160 pass: 160 fail: 0
Qemu test results:
	total: 341 pass: 341 fail: 0

Guenter

maintainer Tested-by on the v1 series
#24 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.292 release. There are 19 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.292-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v4.4:

    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    30 tests:	30 pass, 0 fail

Linux version: 4.4.292-rc1-g17cdd7c2c6dc
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra30-cardhu-a04

Jon