Skip to contentSkip to conversation

dt-bindings: mfd: brcm,cru: fix pin controller nodename

PATCH In review Rafał Miłecki 2 participants 2 messages Dec 7, 2021 – Dec 13, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: mfd: brcm,cru: fix pin controller nodename

From: Rafał Miłecki <[email protected]>

Replace "pin-controller@" with "pinctrl@" to match new pinctrl binding
requirement. This will fix:
Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: cru-bus@1800c100: 'pinctrl@1c0' does not match any of the regexes: '^clock-controller@[a-f0-9]+$', '^phy@[a-f0-9]+$', '^pin-controller@[a-f0-9]+$', '^syscon@[a-f0-9]+$', '^thermal@[a-f0-9]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/mfd/brcm,cru.yaml

---
 Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/mfd/brcm,cru.yaml +2 -2
index be4a2df71c25..b85819fbb07c 100644
@@ -39,7 +39,7 @@ patternProperties:
   '^phy@[a-f0-9]+$':
     $ref: ../phy/bcm-ns-usb2-phy.yaml
 
-  '^pin-controller@[a-f0-9]+$':
+  '^pinctrl@[a-f0-9]+$':
     $ref: ../pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
@@ -94,7 +94,7 @@ examples:
             reg = <0x180 0x4>;
         };
 
-        pin-controller@1c0 {
+        pinctrl@1c0 {
             compatible = "brcm,bcm4708-pinmux";
             reg = <0x1c0 0x24>;
             reg-names = "cru_gpio_control";
Signature · 1 line
2.31.1
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 7 lines · Rafał Miłecki

From: Rafał Miłecki <[email protected]>

Replace "pin-controller@" with "pinctrl@" to match new pinctrl binding
requirement. This will fix:
Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: cru-bus@1800c100: 'pinctrl@1c0' does not match any of the regexes: '^clock-controller@[a-f0-9]+$', '^phy@[a-f0-9]+$', '^pin-controller@[a-f0-9]+$', '^syscon@[a-f0-9]+$', '^thermal@[a-f0-9]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/mfd/brcm,cru.yaml

Quoted 6 lines
---
 Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)