armv8/fsl-lsch3: Suppress spurious warning on Layerscape CPUs
PATCH 1/1 armv8/fsl-lsch3: Suppress spurious warning on Layerscape CPUs
From: Stephen Carlson <[email protected]>
NXP/Freescale Layerscape CPUs support high-speed serial interfaces (SERDES) that can be configured for the application. Interfaces not used by the application can be set to protocol 0 to turn them off and save power, but U-Boot would emit a warning that 0 was invalid for a SERDES protocol on boot. Replace the warning text with a notice that the SERDES is disabled.
Signed-off-by Stephen Carlson <[email protected]>
Cc Priyanka Jain <[email protected]>
--- arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +7 -3
@@ -147,10 +147,14 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, cfg >>= sd_prctl_shift; cfg =serdes_get_number (sd, cfg); -printf ("Using SERDES%d Protocol: %d (0x%x)\n" , sd +1 , cfg, cfg); +if (cfg ==0 ) { +printf ("SERDES%d is disabled\n" , sd +1 ); + }else { +printf ("Using SERDES%d Protocol: %d (0x%x)\n" , sd +1 , cfg, cfg); -if (!is_serdes_prtcl_valid (sd, cfg)) -printf ("SERDES%d[PRTCL] = 0x%x is not valid\n" , sd +1 , cfg); +if (!is_serdes_prtcl_valid (sd, cfg)) +printf ("SERDES%d[PRTCL] = 0x%x is not valid\n" , sd +1 , cfg); + }for (lane =0 ; lane <SRDS_MAX_LANES ; lane++) {enum srds_prtcl lane_prtcl =serdes_get_prtcl (sd, cfg, lane);
Signature · 1 line
2.17.1