PCI: qcom: fix pipe clock imbalance

Commit ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") introduced a clock imbalance by enabling the pipe clock both in init() and in post_init() but only disabling in post_deinit().

Note that the pipe clock was also never disabled in the init() error paths and that enabling the clock before powering up the PHY looks questionable.

---

Resending with lists on CC.

Johan

 drivers/pci/controller/dwc/pcie-qcom.c | 6 ------
 1 file changed, 6 deletions(-)

index b79d98e5e228..20a0e6533a1c 100644
@@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		goto err_disable_clocks;
 	}
 
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		goto err_disable_clocks;
-	}
-
 	/* Wait for reset to complete, required on SM8450 */
 	usleep_range(1000, 1500);
 

2.35.1