PCI: qcom: fix pipe clock imbalance
Subsystems (5)
PATCH 1/1 PCI: qcom: fix pipe clock imbalance
Commit ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") introduced a clock imbalance by enabling the pipe clock both in init() and in post_init() but only disabling in post_deinit().
Note that the pipe clock was also never disabled in the init() error paths and that enabling the clock before powering up the PHY looks questionable.
--- drivers/pci/controller/dwc/pcie-qcom.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/pci/controller/dwc/pcie-qcom.c +0 -6
@@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) goto err_disable_clocks; } - ret =clk_prepare_enable (res->pipe_clk); -if (ret) { -dev_err (dev,"cannot prepare/enable pipe clock\n" ); - goto err_disable_clocks; - } -/* Wait for reset to complete, required on SM8450 */ usleep_range (1000 ,1500 );
Signature · 1 line
2.35.1
Quoted 4 lines · Johan Hovold
Commit
ed8cc3b1fc84("PCI: qcom: Add support for SDM845 PCIe controller") introduced a clock imbalance by enabling the pipe clock both ininit()and inpost_init()but only disabling inpost_deinit().
Quoted 8 lines
Note that the pipe clock was also never disabled in the
init()error paths and that enabling the clock before powering up the PHY looks questionable.Fixes ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")Cc [email protected] # 5.6Cc Bjorn Andersson <[email protected]>Signed-off-by Johan Hovold <[email protected]>
Regards,
Bjorn
Quoted 24 lines
--- drivers/pci/controller/dwc/pcie-qcom.c | 6 ------ 1 file changed, 6 deletions(-)drivers/pci/controller/dwc/pcie-qcom.c +0
-6@@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) goto err_disable_clocks; } - ret =clk_prepare_enable (res->pipe_clk); -if (ret) { -dev_err (dev,"cannot prepare/enable pipe clock\n" ); - goto err_disable_clocks; - } -/* Wait for reset to complete, required on SM8450 */ usleep_range (1000 ,1500 );Signature · 1 line
2.35.1