Skip to contentSkip to conversation

5.17.2-rc1 review

PATCH In review Greg Kroah-Hartman 16 participants 1,147 messages Apr 5, 2022 – Apr 6, 2022 Page 5 of 9

Subsystems (11)
Stable branch VFS MIPS Crypto API +7 more subsystems
lore
Share & tools
lore
author maintainer
#543 lore raw

PATCH 543/1126 iommu/ipmmu-vmsa: Check for error num after setting mask

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 1fdbbfd5099f797a4dac05e7ef0192ba4a9c39b4 ]

Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails.

Fixes 1c894225bf5b ("iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master")
---
 drivers/iommu/ipmmu-vmsa.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/iommu/ipmmu-vmsa.c +3 -1
index ca752bdc710f..61bd9a3004ed 100644
@@ -1006,7 +1006,9 @@ static int ipmmu_probe(struct platform_device *pdev)
 	bitmap_zero(mmu->ctx, IPMMU_CTX_MAX);
 	mmu->features = of_device_get_match_data(&pdev->dev);
 	memset(mmu->utlb_ctx, IPMMU_CTX_INVALID, mmu->features->num_utlbs);
-	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+	if (ret)
+		return ret;
 
 	/* Map I/O memory and request IRQ. */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
Signature · 1 line
2.34.1
author maintainer
#544 lore raw

PATCH 544/1126 drm/bridge: anx7625: Fix overflow issue on reading EDID

In reply to Greg Kroah-Hartman

From: Pin-Yen Lin <[email protected]>

[ Upstream commit d5c6f647aec9ed524aedd04a3aec5ebc21d39007 ]

The length of EDID block can be longer than 256 bytes, so we should use int instead of u8 for the edid_pos variable.

Fixes 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/bridge/analogix/anx7625.c +2 -1
index 2346dbcc505f..e596cacce9e3 100644
@@ -846,7 +846,8 @@ static int segments_edid_read(struct anx7625_data *ctx,
 static int sp_tx_edid_read(struct anx7625_data *ctx,
 			   u8 *pedid_blocks_buf)
 {
-	u8 offset, edid_pos;
+	u8 offset;
+	int edid_pos;
 	int count, blocks_num;
 	u8 pblock_buf[MAX_DPCD_BUFFER_SIZE];
 	u8 i, j;
Signature · 1 line
2.34.1
author maintainer
#545 lore raw

PATCH 545/1126 ath11k: fix uninitialized rate_idx in ath11k_dp_tx_update_txcompl()

In reply to Greg Kroah-Hartman

From: Wen Gong <[email protected]>

[ Upstream commit 8c4c567fa291e4805d5116f1333b2ed83877032b ]

The rate_idx which passed to ath11k_debugfs_sta_add_tx_stats() by ath11k_dp_tx_update_txcompl() is not initialized, add initialization for it.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Fixes 1b8bb94c0612 ("ath11k: report tx bitrate for iw wlan station dump")
---
 drivers/net/wireless/ath/ath11k/dp_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath11k/dp_tx.c +1 -1
index 91d6244b6543..8402961c6688 100644
@@ -426,7 +426,7 @@ void ath11k_dp_tx_update_txcompl(struct ath11k *ar, struct hal_tx_status *ts)
 	struct ath11k_sta *arsta;
 	struct ieee80211_sta *sta;
 	u16 rate, ru_tones;
-	u8 mcs, rate_idx, ofdma;
+	u8 mcs, rate_idx = 0, ofdma;
 	int ret;
 
 	spin_lock_bh(&ab->base_lock);
Signature · 1 line
2.34.1
author maintainer
#546 lore raw

PATCH 546/1126 i2c: pasemi: Drop I2C classes from platform driver variant

In reply to Greg Kroah-Hartman

From: Martin Povišer <[email protected]>

[ Upstream commit 19e138e43a0820bb4dbf8fb5c7691f82e9221f2b ]

Drop I2C device-probing classes from platform variant of the PASemi controller as it is only used on platforms where I2C devices should be instantiated in devicetree. (The I2C_CLASS_DEPRECATED flag is not raised as up to this point no devices relied on the old behavior.)

Fixes d88ae2932df0 ("i2c: pasemi: Add Apple platform driver")
---
 drivers/i2c/busses/i2c-pasemi-core.c | 1 -
 drivers/i2c/busses/i2c-pasemi-pci.c  | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/i2c-pasemi-core.c +0 -1
index 4e161a4089d8..7728c8460dc0 100644
@@ -333,7 +333,6 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus)
 	smbus->adapter.owner = THIS_MODULE;
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		 "PA Semi SMBus adapter (%s)", dev_name(smbus->dev));
-	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
 
drivers/i2c/busses/i2c-pasemi-pci.c +1 -0
index 1ab1f28744fb..cfc89e04eb94 100644
@@ -56,6 +56,7 @@ static int pasemi_smb_pci_probe(struct pci_dev *dev,
 	if (!smbus->ioaddr)
 		return -EBUSY;
 
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	error = pasemi_i2c_common_probe(smbus);
 	if (error)
 		return error;
Signature · 1 line
2.34.1
author maintainer
#547 lore raw

PATCH 547/1126 bpftool: Fix the error when lookup in no-btf maps

In reply to Greg Kroah-Hartman

From: Yinjun Zhang <[email protected]>

[ Upstream commit edc21dc909c6c133a2727f063eadd7907af51f94 ]

When reworking btf__get_from_id() in commit a19f93cfafdf the error handling when calling bpf_btf_get_fd_by_id() changed. Before the rework if bpf_btf_get_fd_by_id() failed the error would not be propagated to callers of btf__get_from_id(), after the rework it is. This lead to a change in behavior in print_key_value() that now prints an error when trying to lookup keys in maps with no btf available.

Fix this by following the way used in dumping maps to allow to look up keys in no-btf maps, by which it decides whether and where to get the btf info according to the btf value type.

---
 tools/bpf/bpftool/map.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
tools/bpf/bpftool/map.c +2 -4
index c66a3c979b7a..7a341a472ea4 100644
@@ -1054,11 +1054,9 @@ static void print_key_value(struct bpf_map_info *info, void *key,
 	json_writer_t *btf_wtr;
 	struct btf *btf;
 
-	btf = btf__load_from_kernel_by_id(info->btf_id);
-	if (libbpf_get_error(btf)) {
-		p_err("failed to get btf");
+	btf = get_map_kv_btf(info);
+	if (libbpf_get_error(btf))
 		return;
-	}
 
 	if (json_output) {
 		print_entry_json(info, key, value, btf);
Signature · 1 line
2.34.1
author maintainer
#548 lore raw

PATCH 548/1126 drm/amd/pm: enable pm sysfs write for one VF mode

In reply to Greg Kroah-Hartman

From: Yiqing Yao <[email protected]>

[ Upstream commit e610941c45bad75aa839af015c27d236ab6749e5 ]

[why]
pm sysfs should be writable in one VF mode as is in passthrough

[how]
do not remove write access on pm sysfs if device is in one VF mode

Fixes 11c9cc95f818 ("amdgpu/pm: Make sysfs pm attributes as read-only for VFs")
---
 drivers/gpu/drm/amd/pm/amdgpu_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/pm/amdgpu_pm.c +2 -2
index 48cc009d9bdf..dc910003f3ca 100644
@@ -2134,8 +2134,8 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
 		}
 	}
 
-	/* setting should not be allowed from VF */
-	if (amdgpu_sriov_vf(adev)) {
+	/* setting should not be allowed from VF if not in one VF mode */
+	if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev)) {
 		dev_attr->attr.mode &= ~S_IWUGO;
 		dev_attr->store = NULL;
 	}
Signature · 1 line
2.34.1
author maintainer
#549 lore raw

PATCH 549/1126 drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug

In reply to Greg Kroah-Hartman

From: Roman Li <[email protected]>

[ Upstream commit 128f8ed5902a287a6bb4afe0ffdae8a80b2a64ec ]

[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors" However the original implementation may skip crtc if the topology change caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after unplug event on one of the connectors.

[How]
Update add_affected_mst_dsc_crtcs() to use old connector state if new connector state has no crtc (undergoes modeset due to unplug)

Fixes 44be939ff7ac58 ("drm/amd/display: Trigger modesets on MST DSC connectors")
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +5 -2
index 5f4a346c9c2a..eae9f9e26f0e 100644
@@ -10861,10 +10861,13 @@ static int dm_check_crtc_cursor(struct drm_atomic_state *state,
 static int add_affected_mst_dsc_crtcs(struct drm_atomic_state *state, struct drm_crtc *crtc)
 {
 	struct drm_connector *connector;
-	struct drm_connector_state *conn_state;
+	struct drm_connector_state *conn_state, *old_conn_state;
 	struct amdgpu_dm_connector *aconnector = NULL;
 	int i;
-	for_each_new_connector_in_state(state, connector, conn_state, i) {
+	for_each_oldnew_connector_in_state(state, connector, old_conn_state, conn_state, i) {
+		if (!conn_state->crtc)
+			conn_state = old_conn_state;
+
 		if (conn_state->crtc != crtc)
 			continue;
 
Signature · 1 line
2.34.1
author maintainer
#550 lore raw

PATCH 550/1126 bpftool: Fix pretty print dump for maps without BTF loaded

In reply to Greg Kroah-Hartman

From: Jiri Olsa <[email protected]>

[ Upstream commit f76d8507d23834f7e56b0fe95c82605e7d7e0efe ]

The commit e5043894b21f ("bpftool: Use libbpf_get_error() to check error") fails to dump map without BTF loaded in pretty mode (-p option).

Fixing this by making sure get_map_kv_btf won't fail in case there's no BTF available for the map.

Fixes e5043894b21f ("bpftool: Use libbpf_get_error() to check error")
---
 tools/bpf/bpftool/map.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)
tools/bpf/bpftool/map.c +15 -16
index 7a341a472ea4..e746642de292 100644
@@ -805,29 +805,30 @@ static int maps_have_btf(int *fds, int nb_fds)
 
 static struct btf *btf_vmlinux;
 
-static struct btf *get_map_kv_btf(const struct bpf_map_info *info)
+static int get_map_kv_btf(const struct bpf_map_info *info, struct btf **btf)
 {
-	struct btf *btf = NULL;
+	int err = 0;
 
 	if (info->btf_vmlinux_value_type_id) {
 		if (!btf_vmlinux) {
 			btf_vmlinux = libbpf_find_kernel_btf();
-			if (libbpf_get_error(btf_vmlinux))
+			err = libbpf_get_error(btf_vmlinux);
+			if (err) {
 				p_err("failed to get kernel btf");
+				return err;
+			}
 		}
-		return btf_vmlinux;
+		*btf = btf_vmlinux;
 	} else if (info->btf_value_type_id) {
-		int err;
-
-		btf = btf__load_from_kernel_by_id(info->btf_id);
-		err = libbpf_get_error(btf);
-		if (err) {
+		*btf = btf__load_from_kernel_by_id(info->btf_id);
+		err = libbpf_get_error(*btf);
+		if (err)
 			p_err("failed to get btf");
-			btf = ERR_PTR(err);
-		}
+	} else {
+		*btf = NULL;
 	}
 
-	return btf;
+	return err;
 }
 
 static void free_map_kv_btf(struct btf *btf)
@@ -862,8 +863,7 @@ map_dump(int fd, struct bpf_map_info *info, json_writer_t *wtr,
 	prev_key = NULL;
 
 	if (wtr) {
-		btf = get_map_kv_btf(info);
-		err = libbpf_get_error(btf);
+		err = get_map_kv_btf(info, &btf);
 		if (err) {
 			goto exit_free;
 		}
@@ -1054,8 +1054,7 @@ static void print_key_value(struct bpf_map_info *info, void *key,
 	json_writer_t *btf_wtr;
 	struct btf *btf;
 
-	btf = get_map_kv_btf(info);
-	if (libbpf_get_error(btf))
+	if (get_map_kv_btf(info, &btf))
 		return;
 
 	if (json_output) {
Signature · 1 line
2.34.1
author maintainer
#551 lore raw

PATCH 551/1126 libbpf: Fix memleak in libbpf_netlink_recv()

In reply to Greg Kroah-Hartman

From: Andrii Nakryiko <[email protected]>

[ Upstream commit 1b8c924a05934d2e758ec7da7bd217ef8ebd80ce ]

Ensure that libbpf_netlink_recv() frees dynamically allocated buffer in all code paths.

Fixes 9c3de619e13e ("libbpf: Use dynamically allocated buffer when receiving netlink messages")
---
 tools/lib/bpf/netlink.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
tools/lib/bpf/netlink.c +5 -3
index 69b353d55dbf..fadde7d80a51 100644
@@ -176,7 +176,8 @@ static int libbpf_netlink_recv(int sock, __u32 nl_pid, int seq,
 				libbpf_nla_dump_errormsg(nh);
 				goto done;
 			case NLMSG_DONE:
-				return 0;
+				ret = 0;
+				goto done;
 			default:
 				break;
 			}
@@ -188,9 +189,10 @@ static int libbpf_netlink_recv(int sock, __u32 nl_pid, int seq,
 				case NL_NEXT:
 					goto start;
 				case NL_DONE:
-					return 0;
+					ret = 0;
+					goto done;
 				default:
-					return ret;
+					goto done;
 				}
 			}
 		}
Signature · 1 line
2.34.1
author maintainer
#552 lore raw

PATCH 552/1126 IB/cma: Allow XRC INI QPs to set their local ACK timeout

In reply to Greg Kroah-Hartman

From: Håkon Bugge <[email protected]>

[ Upstream commit 748663c8ccf6b2e5a800de19127c2cc1c4423fd2 ]

XRC INI QPs should be able to adjust their local ACK timeout.

Fixes 2c1619edef61 ("IB/cma: Define option to set ack timeout and pack tos_set")
---
 drivers/infiniband/core/cma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/core/cma.c +1 -1
index 50c53409ceb6..fabca5e51e3d 100644
@@ -2642,7 +2642,7 @@ int rdma_set_ack_timeout(struct rdma_cm_id *id, u8 timeout)
 {
 	struct rdma_id_private *id_priv;
 
-	if (id->qp_type != IB_QPT_RC)
+	if (id->qp_type != IB_QPT_RC && id->qp_type != IB_QPT_XRC_INI)
 		return -EINVAL;
 
 	id_priv = container_of(id, struct rdma_id_private, id);
Signature · 1 line
2.34.1
author maintainer
#553 lore raw

PATCH 553/1126 cxl/core/port: Rename bus.c to port.c

In reply to Greg Kroah-Hartman

From: Dan Williams <[email protected]>

[ Upstream commit 0ff0af18216436d0151af4e410400c7a19ca9437 ]

Given it is dominated by port infrastructure, and will only acquire more, rename bus.c to port.c.

---
 Documentation/driver-api/cxl/memory-devices.rst | 4 ++--
 drivers/cxl/core/Makefile                       | 2 +-
 drivers/cxl/core/{bus.c => port.c}              | 0
 tools/testing/cxl/Kbuild                        | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
 rename drivers/cxl/core/{bus.c => port.c} (100%)
Documentation/driver-api/cxl/memory-devices.rst +2 -2
index 3b8f41395f6b..c8f7a16cd0e3 100644
@@ -36,10 +36,10 @@ CXL Core
 .. kernel-doc:: drivers/cxl/cxl.h
    :internal:
 
-.. kernel-doc:: drivers/cxl/core/bus.c
+.. kernel-doc:: drivers/cxl/core/port.c
    :doc: cxl core
 
-.. kernel-doc:: drivers/cxl/core/bus.c
+.. kernel-doc:: drivers/cxl/core/port.c
    :identifiers:
 
 .. kernel-doc:: drivers/cxl/core/pmem.c
drivers/cxl/core/Makefile +1 -1
index 40ab50318daf..a90202ac88d2 100644
@@ -2,7 +2,7 @@
 obj-$(CONFIG_CXL_BUS) += cxl_core.o
 
 ccflags-y += -I$(srctree)/drivers/cxl
-cxl_core-y := bus.o
+cxl_core-y := port.o
 cxl_core-y += pmem.o
 cxl_core-y += regs.o
 cxl_core-y += memdev.o
drivers/cxl/core/port.c renamed from drivers/cxl/core/bus.c +0 -0
similarity index 100%
rename from drivers/cxl/core/bus.c
rename to drivers/cxl/core/port.c
tools/testing/cxl/Kbuild +1 -1
index 1acdf2fc31c5..3299fb0977b2 100644
@@ -25,7 +25,7 @@ cxl_pmem-y += config_check.o
 
 obj-m += cxl_core.o
 
-cxl_core-y := $(CXL_CORE_SRC)/bus.o
+cxl_core-y := $(CXL_CORE_SRC)/port.o
 cxl_core-y += $(CXL_CORE_SRC)/pmem.o
 cxl_core-y += $(CXL_CORE_SRC)/regs.o
 cxl_core-y += $(CXL_CORE_SRC)/memdev.o
Signature · 1 line
2.34.1
author maintainer
#554 lore raw

PATCH 554/1126 cxl/port: Hold port reference until decoder release

In reply to Greg Kroah-Hartman

From: Dan Williams <[email protected]>

[ Upstream commit 74be98774dfbc5b8b795db726bd772e735d2edd4 ]

KASAN + DEBUG_KOBJECT_RELEASE reports a potential use-after-free in cxl_decoder_release() where it goes to reference its parent, a cxl_port, to free its id back to port->decoder_ida.

 BUG: KASAN: use-after-free in to_cxl_port+0x18/0x90 [cxl_core]
 Read of size 8 at addr ffff888119270908 by task kworker/35:2/379

 CPU: 35 PID: 379 Comm: kworker/35:2 Tainted: G           OE     5.17.0-rc2+ #198
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
 Workqueue: events kobject_delayed_cleanup
 Call Trace:
  <TASK>
  dump_stack_lvl+0x59/0x73
  print_address_description.constprop.0+0x1f/0x150
  ? to_cxl_port+0x18/0x90 [cxl_core]
  kasan_report.cold+0x83/0xdf
  ? to_cxl_port+0x18/0x90 [cxl_core]
  to_cxl_port+0x18/0x90 [cxl_core]
  cxl_decoder_release+0x2a/0x60 [cxl_core]
  device_release+0x5f/0x100
  kobject_cleanup+0x80/0x1c0

The device core only guarantees parent lifetime until all children are unregistered. If a child needs a parent to complete its ->release() callback that child needs to hold a reference to extend the lifetime of the parent.

---
 drivers/cxl/core/port.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/cxl/core/port.c +4 -0
index 3f9b98ecd18b..aa5239ac67c6 100644
@@ -182,6 +182,7 @@ static void cxl_decoder_release(struct device *dev)
 
 	ida_free(&port->decoder_ida, cxld->id);
 	kfree(cxld);
+	put_device(&port->dev);
 }
 
 static const struct device_type cxl_decoder_switch_type = {
@@ -500,7 +501,10 @@ struct cxl_decoder *cxl_decoder_alloc(struct cxl_port *port, int nr_targets)
 	if (rc < 0)
 		goto err;
 
+	/* need parent to stick around to release the id */
+	get_device(&port->dev);
 	cxld->id = rc;
+
 	cxld->nr_targets = nr_targets;
 	dev = &cxld->dev;
 	device_initialize(dev);
Signature · 1 line
2.34.1
author maintainer
#555 lore raw

PATCH 555/1126 dax: make sure inodes are flushed before destroy cache

In reply to Greg Kroah-Hartman

From: Tong Zhang <[email protected]>

[ Upstream commit a7e8de822e0b1979f08767c751f6c8a9c1d4ad86 ]

A bug can be triggered by following command

$ modprobe nd_pmem && modprobe -r nd_pmem
[   10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[   10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[   10.062433] Call Trace:
[   10.062673]  dump_stack_lvl+0x34/0x44
[   10.062865]  slab_err+0x90/0xd0
[   10.063619]  __kmem_cache_shutdown+0x13b/0x2f0
[   10.063848]  kmem_cache_destroy+0x4a/0x110
[   10.064058]  __x64_sys_delete_module+0x265/0x300

This is caused by dax_fs_exit() not flushing inodes before destroy cache. To fix this issue, call rcu_barrier() before destroy cache.

Fixes 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances")
---
 drivers/dax/super.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dax/super.c +1 -0
index e3029389d809..6bd565fe2e63 100644
@@ -476,6 +476,7 @@ static int dax_fs_init(void)
 static void dax_fs_exit(void)
 {
 	kern_unmount(dax_mnt);
+	rcu_barrier();
 	kmem_cache_destroy(dax_cache);
 }
 
Signature · 1 line
2.34.1
author maintainer
#556 lore raw

PATCH 556/1126 selftests: mptcp: add csum mib check for mptcp_connect

In reply to Greg Kroah-Hartman

From: Geliang Tang <[email protected]>

[ Upstream commit 24720d7452df2dff2e539d9dff28904e25bb1c6d ]

This patch added the data checksum error mib counters check for the script mptcp_connect.sh when the data checksum is enabled.

In do_transfer(), got the mib counters twice, before and after running the mptcp_connect commands. The latter minus the former is the actual number of the data checksum mib counter.

The output looks like this:

ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP   (duration    86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008      ) MPTCP   (duration    66ms) [ FAIL ]

server got 1 data checksum error[s]

Fixes 94d66ba1d8e48 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
---
 .../selftests/net/mptcp/mptcp_connect.sh      | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
tools/testing/selftests/net/mptcp/mptcp_connect.sh +19 -0
index f0f4ab96b8f3..621af6895f4d 100755
@@ -432,6 +432,8 @@ do_transfer()
 	local stat_ackrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
 	local stat_cookietx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent")
 	local stat_cookierx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv")
+	local stat_csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr")
+	local stat_csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr")
 
 	timeout ${timeout_test} \
 		ip netns exec ${listener_ns} \
@@ -524,6 +526,23 @@ do_transfer()
 		fi
 	fi
 
+	if $checksum; then
+		local csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr")
+		local csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr")
+
+		local csum_err_s_nr=$((csum_err_s - stat_csum_err_s))
+		if [ $csum_err_s_nr -gt 0 ]; then
+			printf "[ FAIL ]\nserver got $csum_err_s_nr data checksum error[s]"
+			rets=1
+		fi
+
+		local csum_err_c_nr=$((csum_err_c - stat_csum_err_c))
+		if [ $csum_err_c_nr -gt 0 ]; then
+			printf "[ FAIL ]\nclient got $csum_err_c_nr data checksum error[s]"
+			retc=1
+		fi
+	fi
+
 	if [ $retc -eq 0 ] && [ $rets -eq 0 ]; then
 		printf "[ OK ]"
 	fi
Signature · 1 line
2.34.1
author maintainer
#557 lore raw

PATCH 557/1126 iwlwifi: mvm: Dont call iwl_mvm_sta_from_mac80211() with NULL sta

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 30d17c12b0895e15ce22ebc1f52a4ff02df6dbc6 ]

The recent fix for NULL sta in iwl_mvm_get_tx_rate() still has a call of iwl_mvm_sta_from_mac80211() that may be called with NULL sta. Although this practically only points to the address and the actual access doesn't happen due to the conditional evaluation at a later point, it looks a bit flaky.

This patch drops the temporary variable above and evaluates iwm_mvm_sta_from_mac80211() directly for avoiding confusions.

Fixes d599f714b73e ("iwlwifi: mvm: don't crash on invalid rate w/o STA")
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/wireless/intel/iwlwifi/mvm/tx.c +2 -3
index 9213f8518f10..40daced97b9e 100644
@@ -318,15 +318,14 @@ static u32 iwl_mvm_get_tx_rate(struct iwl_mvm *mvm,
 
 	/* info->control is only relevant for non HW rate control */
 	if (!ieee80211_hw_check(mvm->hw, HAS_RATE_CONTROL)) {
-		struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-
 		/* HT rate doesn't make sense for a non data frame */
 		WARN_ONCE(info->control.rates[0].flags & IEEE80211_TX_RC_MCS &&
 			  !ieee80211_is_data(fc),
 			  "Got a HT rate (flags:0x%x/mcs:%d/fc:0x%x/state:%d) for a non data frame\n",
 			  info->control.rates[0].flags,
 			  info->control.rates[0].idx,
-			  le16_to_cpu(fc), sta ? mvmsta->sta_state : -1);
+			  le16_to_cpu(fc),
+			  sta ? iwl_mvm_sta_from_mac80211(sta)->sta_state : -1);
 
 		rate_idx = info->control.rates[0].idx;
 	}
Signature · 1 line
2.34.1
author maintainer
#558 lore raw

PATCH 558/1126 iwlwifi: mvm: dont iterate unadded vifs when handling FW SMPS req

In reply to Greg Kroah-Hartman

From: Luca Coelho <[email protected]>

[ Upstream commit 8a265d1a619c16400406c9d598411850ee104aed ]

We may not have all the interfaces added to the driver when we get the THERMAL_DUAL_CHAIN_REQUEST notification from the FW, so instead of iterating all vifs to update SMPS, iterate only the ones that are already assigned. The interfaces that were not assigned yet, will be updated accordingly when we start using them.

---
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/ops.c +2 -1
index 1f8b97995b94..069d54501e30 100644
@@ -235,7 +235,8 @@ static void iwl_mvm_rx_thermal_dual_chain_req(struct iwl_mvm *mvm,
 	 */
 	mvm->fw_static_smps_request =
 		req->event == cpu_to_le32(THERMAL_DUAL_CHAIN_REQ_DISABLE);
-	ieee80211_iterate_interfaces(mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+	ieee80211_iterate_interfaces(mvm->hw,
+				     IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER,
 				     iwl_mvm_intf_dual_chain_req, NULL);
 }
 
Signature · 1 line
2.34.1
author maintainer
#559 lore raw

PATCH 559/1126 iwlwifi: mvm: align locking in D3 test debugfs

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit 59e1221f470c2e5d2f2d4c95153edd577a7071c5 ]

Since commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") we're not only holding the RTNL when going in and out of suspend, but also the wiphy->mtx. Add that to the D3 test debugfs in iwlwifi since it's required for various calls to mac80211.

Fixes a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Fixes a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/intel/iwlwifi/mvm/d3.c +4 -0
index b400867e94f0..3f284836e707 100644
@@ -2704,7 +2704,9 @@ static int iwl_mvm_d3_test_open(struct inode *inode, struct file *file)
 
 	/* start pseudo D3 */
 	rtnl_lock();
+	wiphy_lock(mvm->hw->wiphy);
 	err = __iwl_mvm_suspend(mvm->hw, mvm->hw->wiphy->wowlan_config, true);
+	wiphy_unlock(mvm->hw->wiphy);
 	rtnl_unlock();
 	if (err > 0)
 		err = -EINVAL;
@@ -2760,7 +2762,9 @@ static int iwl_mvm_d3_test_release(struct inode *inode, struct file *file)
 	iwl_fw_dbg_read_d3_debug_data(&mvm->fwrt);
 
 	rtnl_lock();
+	wiphy_lock(mvm->hw->wiphy);
 	__iwl_mvm_resume(mvm, true);
+	wiphy_unlock(mvm->hw->wiphy);
 	rtnl_unlock();
 
 	iwl_mvm_resume_tcm(mvm);
Signature · 1 line
2.34.1
author maintainer
#560 lore raw

PATCH 560/1126 iwlwifi: yoyo: remove DBGI_SRAM address reset writing

In reply to Greg Kroah-Hartman

From: Rotem Saado <[email protected]>

[ Upstream commit ce014c9861544bb4e789323d0d8956a5ad262e25 ]

Due to preg protection we cannot write to this register while FW is running (when FW in Halt it is ok). since we have some cases that we need to dump this region while FW is running remove this writing from DRV. FW will do this writing.

---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c   | 2 --
 drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 2 --
 2 files changed, 4 deletions(-)
drivers/net/wireless/intel/iwlwifi/fw/dbg.c +0 -2
index 7ad9cee925da..372cc950cc88 100644
@@ -1561,8 +1561,6 @@ iwl_dump_ini_dbgi_sram_iter(struct iwl_fw_runtime *fwrt,
 		return -EBUSY;
 
 	range->range_data_size = reg->dev_addr.size;
-	iwl_write_prph_no_grab(fwrt->trans, DBGI_SRAM_TARGET_ACCESS_CFG,
-			       DBGI_SRAM_TARGET_ACCESS_CFG_RESET_ADDRESS_MSK);
 	for (i = 0; i < (le32_to_cpu(reg->dev_addr.size) / 4); i++) {
 		prph_data = iwl_read_prph_no_grab(fwrt->trans, (i % 2) ?
 					  DBGI_SRAM_TARGET_ACCESS_RDATA_MSB :
drivers/net/wireless/intel/iwlwifi/iwl-prph.h +0 -2
index 95b3dae7b504..9331a6b6bf36 100644
@@ -354,8 +354,6 @@
 #define WFPM_GP2			0xA030B4
 
 /* DBGI SRAM Register details */
-#define DBGI_SRAM_TARGET_ACCESS_CFG			0x00A2E14C
-#define DBGI_SRAM_TARGET_ACCESS_CFG_RESET_ADDRESS_MSK	0x10000
 #define DBGI_SRAM_TARGET_ACCESS_RDATA_LSB		0x00A2E154
 #define DBGI_SRAM_TARGET_ACCESS_RDATA_MSB		0x00A2E158
 
Signature · 1 line
2.34.1
author maintainer
#561 lore raw

PATCH 561/1126 iwlwifi: yoyo: Avoid using dram data if allocation failed

In reply to Greg Kroah-Hartman

From: Mukesh Sisodiya <[email protected]>

[ Upstream commit e2d53d10ef666859517360e711fd7761e7e984ce ]

The config set TLV setting depend on dram allocation and if allocation failed the data used in config set tlv should not set this.
Adding the check if dram fragment is available or not.

---
 drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c +10 -3
index c73672d61356..42f6f8bb83be 100644
@@ -861,11 +861,18 @@ static void iwl_dbg_tlv_apply_config(struct iwl_fw_runtime *fwrt,
 		case IWL_FW_INI_CONFIG_SET_TYPE_DBGC_DRAM_ADDR: {
 			struct iwl_dbgc1_info dram_info = {};
 			struct iwl_dram_data *frags = &fwrt->trans->dbg.fw_mon_ini[1].frags[0];
-			__le64 dram_base_addr = cpu_to_le64(frags->physical);
-			__le32 dram_size = cpu_to_le32(frags->size);
-			u64  dram_addr = le64_to_cpu(dram_base_addr);
+			__le64 dram_base_addr;
+			__le32 dram_size;
+			u64 dram_addr;
 			u32 ret;
 
+			if (!frags)
+				break;
+
+			dram_base_addr = cpu_to_le64(frags->physical);
+			dram_size = cpu_to_le32(frags->size);
+			dram_addr = le64_to_cpu(dram_base_addr);
+
 			IWL_DEBUG_FW(fwrt, "WRT: dram_base_addr 0x%016llx, dram_size 0x%x\n",
 				     dram_base_addr, dram_size);
 			IWL_DEBUG_FW(fwrt, "WRT: config_list->addr_offset: %u\n",
Signature · 1 line
2.34.1
author maintainer
#562 lore raw

PATCH 562/1126 iwlwifi: mvm: fix off by one in iwl_mvm_stat_iterator_all_macs()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit f1cbb0a8ca9db80c086009c88c71464ac50f50a2 ]

Change the comparison from ">" to ">=" to avoid accessing one element beyond the end of the ->per_mac_stats[] array.

Fixes 6324c173ff4a ("iwlwifi: mvm: add support for statistics update version 15")
---
 drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/rx.c +1 -1
index 64446a11ef98..9a46468bd434 100644
@@ -640,7 +640,7 @@ static void iwl_mvm_stat_iterator_all_macs(void *_data, u8 *mac,
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	u16 vif_id = mvmvif->id;
 
-	if (WARN_ONCE(vif_id > MAC_INDEX_AUX, "invalid vif id: %d", vif_id))
+	if (WARN_ONCE(vif_id >= MAC_INDEX_AUX, "invalid vif id: %d", vif_id))
 		return;
 
 	if (vif->type != NL80211_IFTYPE_STATION)
Signature · 1 line
2.34.1
author maintainer
#563 lore raw

PATCH 563/1126 iwlwifi: Fix -EIO error code that is never returned

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit c305c94bdc18e45b5ad1db54da4269f8cbfdff6b ]

Currently the error -EIO is being assinged to variable ret when the READY_BIT is not set but the function iwlagn_mac_start returns 0 rather than ret. Fix this by returning ret instead of 0.

Addresses-Coverity: ("Unused value")

Fixes 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place")
---
 drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c +1 -1
index 754876cd27ce..e8bd4f0e3d2d 100644
@@ -299,7 +299,7 @@ static int iwlagn_mac_start(struct ieee80211_hw *hw)
 
 	priv->is_open = 1;
 	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
+	return ret;
 }
 
 static void iwlagn_mac_stop(struct ieee80211_hw *hw)
Signature · 1 line
2.34.1
author maintainer
#564 lore raw

PATCH 564/1126 iwlwifi: mvm: Fix an error code in iwl_mvm_up()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 583d18336abdfb1b355270289ff8f6a2608ba905 ]

Return -ENODEV instead of success on this error path.

Fixes dd36a507c806 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt")
---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/fw.c +3 -1
index ae589b3b8c46..ee031a589714 100644
@@ -1658,8 +1658,10 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	while (!sband && i < NUM_NL80211_BANDS)
 		sband = mvm->hw->wiphy->bands[i++];
 
-	if (WARN_ON_ONCE(!sband))
+	if (WARN_ON_ONCE(!sband)) {
+		ret = -ENODEV;
 		goto error;
+	}
 
 	chan = &sband->channels[0];
 
Signature · 1 line
2.34.1
author maintainer
#565 lore raw

PATCH 565/1126 mtd: rawnand: pl353: Set the nand chip node as the flash node

In reply to Greg Kroah-Hartman

From: Amit Kumar Mahapatra <[email protected]>

[ Upstream commit a1fe2ace2c39dcdc7c053705459a73b7598b1e4f ]

In devicetree the flash information is embedded within nand chip node, so during nand chip initialization the nand chip node should be passed to nand_set_flash_node() api, instead of nand controller node.

Fixes 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
---
 drivers/mtd/nand/raw/pl35x-nand-controller.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/nand/raw/pl35x-nand-controller.c +1 -1
index 8a91e069ee2e..3c6f6aff649f 100644
@@ -1062,7 +1062,7 @@ static int pl35x_nand_chip_init(struct pl35x_nandc *nfc,
 	chip->controller = &nfc->controller;
 	mtd = nand_to_mtd(chip);
 	mtd->dev.parent = nfc->dev;
-	nand_set_flash_node(chip, nfc->dev->of_node);
+	nand_set_flash_node(chip, np);
 	if (!mtd->name) {
 		mtd->name = devm_kasprintf(nfc->dev, GFP_KERNEL,
 					   "%s", PL35X_NANDC_DRIVER_NAME);
Signature · 1 line
2.34.1
author maintainer
#566 lore raw

PATCH 566/1126 drm/msm/dp: do not initialize phy until plugin interrupt received

In reply to Greg Kroah-Hartman

From: Kuogee Hsieh <[email protected]>

[ Upstream commit 989ebe7bc4463002c210db0010c8475797a9098f ]

Current DP drivers have regulators, clocks, irq and phy are grouped together within a function and executed not in a symmetric manner. This increase difficulty of code maintenance and limited code scalability. This patch divides the driver life cycle of operation into four states, resume (including booting up), dongle plugin, dongle unplugged and suspend. Regulators, core clocks and irq are grouped together and enabled at resume (or booting up) so that the DP controller is armed and ready to receive HPD plugin interrupts. HPD plugin interrupt is generated when a dongle plugs into DUT (device under test). Once HPD plugin interrupt is received, DP controller will initialize phy so that dpcd read/write will function and following link training can be proceeded successfully. DP phy will be disabled after main link is teared down at end of unplugged HPD interrupt handle triggered by dongle unplugged out of DUT. Finally regulators, code clocks and irq are disabled at corresponding suspension.

Changes in V2:
-- removed unnecessary dp_ctrl NULL check
-- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs -- remove flip parameter out of dp_ctrl_irq_enable()
-- add fixes tag

Changes in V3:
-- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at
dp_display_host_init() for eDP

Changes in V4:
-- rewording commit text to match this commit changes

Changes in V5:
-- rebase on top of msm-next branch

Changes in V6:
-- delete flip variable

Changes in V7:
-- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl()

Changes in V8:
-- add more detail comment regrading dp phy at dp_display_host_init()

Changes in V9:
-- remove set phy_initialized to false when -ECONNRESET detected

Changes in v10:
-- group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately
if aux read

Changes in v12:
-- move dp_display_host_phy_exit() after dp_display_host_deinit()

Changes in v13:
-- do not execute phy_init until plugged_in interrupt for edp, same as DP.

Changes in v14:
-- remove redundant dp->core_initialized = false form dp_pm_suspend.

Changes in v15:
-- remove core_initialized flag check at both host_init and host_deinit

Changes in v16:
-- remove dp_display_host_phy_exit core_initialized=false at dp_pm_suspend

Changes in v17:
-- remove core_initialized checking before execute attention_cb()

Changes in v18:
-- remove core_initialized checking at dp_pm_suspend

Fixes 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c    |  80 ++++++++------------
 drivers/gpu/drm/msm/dp/dp_ctrl.h    |   8 +-
 drivers/gpu/drm/msm/dp/dp_display.c | 111 ++++++++++++++--------------
 3 files changed, 92 insertions(+), 107 deletions(-)
drivers/gpu/drm/msm/dp/dp_ctrl.c +30 -50
index c724cb0bde9d..9c80b493f974 100644
@@ -1365,60 +1365,44 @@ static int dp_ctrl_enable_stream_clocks(struct dp_ctrl_private *ctrl)
 	return ret;
 }
 
-int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset)
+void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable)
+{
+	struct dp_ctrl_private *ctrl;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	dp_catalog_ctrl_reset(ctrl->catalog);
+
+	if (enable)
+		dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
+}
+
+void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
 {
 	struct dp_ctrl_private *ctrl;
 	struct dp_io *dp_io;
 	struct phy *phy;
 
-	if (!dp_ctrl) {
-		DRM_ERROR("Invalid input data\n");
-		return -EINVAL;
-	}
-
 	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
 	dp_io = &ctrl->parser->io;
 	phy = dp_io->phy;
 
-	ctrl->dp_ctrl.orientation = flip;
-
-	if (reset)
-		dp_catalog_ctrl_reset(ctrl->catalog);
-
-	DRM_DEBUG_DP("flip=%d\n", flip);
 	dp_catalog_ctrl_phy_reset(ctrl->catalog);
 	phy_init(phy);
-	dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
-
-	return 0;
 }
 
-/**
- * dp_ctrl_host_deinit() - Uninitialize DP controller
- * @dp_ctrl: Display Port Driver data
- *
- * Perform required steps to uninitialize DP controller
- * and its resources.
- */
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
+void dp_ctrl_phy_exit(struct dp_ctrl *dp_ctrl)
 {
 	struct dp_ctrl_private *ctrl;
 	struct dp_io *dp_io;
 	struct phy *phy;
 
-	if (!dp_ctrl) {
-		DRM_ERROR("Invalid input data\n");
-		return;
-	}
-
 	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
 	dp_io = &ctrl->parser->io;
 	phy = dp_io->phy;
 
-	dp_catalog_ctrl_enable_irq(ctrl->catalog, false);
+	dp_catalog_ctrl_phy_reset(ctrl->catalog);
 	phy_exit(phy);
-
-	DRM_DEBUG_DP("Host deinitialized successfully\n");
 }
 
 static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
@@ -1488,7 +1472,10 @@ static int dp_ctrl_deinitialize_mainlink(struct dp_ctrl_private *ctrl)
 	}
 
 	phy_power_off(phy);
+
+	/* aux channel down, reinit phy */
 	phy_exit(phy);
+	phy_init(phy);
 
 	return 0;
 }
@@ -1893,8 +1880,14 @@ int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
 		return ret;
 	}
 
+	DRM_DEBUG_DP("Before, phy=%x init_count=%d power_on=%d\n",
+		(u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
 	phy_power_off(phy);
 
+	DRM_DEBUG_DP("After, phy=%x init_count=%d power_on=%d\n",
+		(u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
 	/* aux channel down, reinit phy */
 	phy_exit(phy);
 	phy_init(phy);
@@ -1903,23 +1896,6 @@ int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
 	return ret;
 }
 
-void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl)
-{
-	struct dp_ctrl_private *ctrl;
-	struct dp_io *dp_io;
-	struct phy *phy;
-
-	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
-	dp_io = &ctrl->parser->io;
-	phy = dp_io->phy;
-
-	dp_catalog_ctrl_reset(ctrl->catalog);
-
-	phy_exit(phy);
-
-	DRM_DEBUG_DP("DP off phy done\n");
-}
-
 int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
 {
 	struct dp_ctrl_private *ctrl;
@@ -1947,10 +1923,14 @@ int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
 		DRM_ERROR("Failed to disable link clocks. ret=%d\n", ret);
 	}
 
+	DRM_DEBUG_DP("Before, phy=%x init_count=%d power_on=%d\n",
+		(u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
 	phy_power_off(phy);
-	phy_exit(phy);
 
-	DRM_DEBUG_DP("DP off done\n");
+	DRM_DEBUG_DP("After, phy=%x init_count=%d power_on=%d\n",
+		(u32)(uintptr_t)phy, phy->init_count, phy->power_count);
+
 	return ret;
 }
 
drivers/gpu/drm/msm/dp/dp_ctrl.h +5 -3
index 2363a2df9597..2433edbc70a6 100644
@@ -19,12 +19,9 @@ struct dp_ctrl {
 	u32 pixel_rate;
 };
 
-int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset);
-void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
-void dp_ctrl_off_phy(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
 void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
 void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
@@ -34,4 +31,9 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
 			struct dp_power *power, struct dp_catalog *catalog,
 			struct dp_parser *parser);
 
+void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable);
+void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_phy_exit(struct dp_ctrl *dp_ctrl);
+void dp_ctrl_irq_phy_exit(struct dp_ctrl *dp_ctrl);
+
 #endif /* _DP_CTRL_H_ */
drivers/gpu/drm/msm/dp/dp_display.c +57 -54

212 lines not on this page · raw message

Signature · 1 line
2.34.1
author maintainer
#567 lore raw

PATCH 567/1126 drm/msm/dp: populate connector of struct dp_panel

In reply to Greg Kroah-Hartman

From: Kuogee Hsieh <[email protected]>

[ Upstream commit 5e602f5156910c7b19661699896cb6e3fb94fab9 ]

DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose and expect DP source return correct checksum. During drm edid read, correct edid checksum is calculated and stored at connector::real_edid_checksum.

The problem is struct dp_panel::connector never be assigned, instead the connector is stored in struct msm_dp::connector. When we run compliance testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid edid set in struct dp_panel::edid so we'll try to use the connectors real_edid_checksum and hit a NULL pointer dereference error because the connector pointer is never assigned.

Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()

Changes in V3:
-- remove unhelpful kernel crash trace commit text -- remove renaming dp_display parameter to dp

Changes in V4:
-- add more details to commit text

Changes in v10:
-- group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Fixes 7948fe12d47 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
---
 drivers/gpu/drm/msm/dp/dp_display.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/msm/dp/dp_display.c +5 -0
index 30590232d263..1d7f82e6eafe 100644
@@ -1463,6 +1463,7 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
 			struct drm_encoder *encoder)
 {
 	struct msm_drm_private *priv;
+	struct dp_display_private *dp_priv;
 	int ret;
 
 	if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
@@ -1471,6 +1472,8 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
 	priv = dev->dev_private;
 	dp_display->drm_dev = dev;
 
+	dp_priv = container_of(dp_display, struct dp_display_private, dp_display);
+
 	ret = dp_display_request_irq(dp_display);
 	if (ret) {
 		DRM_ERROR("request_irq failed, ret=%d\n", ret);
@@ -1488,6 +1491,8 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
 		return ret;
 	}
 
+	dp_priv->panel->connector = dp_display->connector;
+
 	priv->connectors[priv->num_connectors++] = dp_display->connector;
 
 	dp_display->bridge = msm_dp_bridge_init(dp_display, dev, encoder);
Signature · 1 line
2.34.1
author maintainer
#568 lore raw

PATCH 568/1126 drm/msm/dp: stop link training after link training 2 failed

In reply to Greg Kroah-Hartman

From: Kuogee Hsieh <[email protected]>

[ Upstream commit 9051d629dbf7a998a40f7eac65a9512b01bc3bb8 ]

Each DP link training contains link training 1 followed by link training 2. There is maximum of 5 retries of DP link training before declared link training failed. It is required to stop link training at end of link training 2 if it is failed so that next link training 1 can start freshly. This patch fixes link compliance test case 4.3.1.13 (Source Device Link Training EQ Fallback Test).

Changes in v10:
-- group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Fixes 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/msm/dp/dp_ctrl.c +3 -0
index 9c80b493f974..8d1ea694d06c 100644
@@ -1748,6 +1748,9 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
 				/* end with failure */
 				break; /* lane == 1 already */
 			}
+
+			/* stop link training before start re training  */
+			dp_ctrl_clear_training_pattern(ctrl);
 		}
 	}
 
Signature · 1 line
2.34.1
author maintainer
#569 lore raw

PATCH 569/1126 drm/msm/dp: always add fail-safe mode into connector mode list

In reply to Greg Kroah-Hartman

From: Kuogee Hsieh <[email protected]>

[ Upstream commit d4aca422539c441a7f3fec749287b36de37d9b6b ]

Some of DP link compliant test expects to return fail-safe mode if prefer detailed timing mode can not be supported by mainlink's lane and rate after link training. Therefore add fail-safe mode into connector mode list as backup mode. This patch fixes test case 4.2.2.1.

Changes in v2:
-- add Fixes text string

Fixes 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1")
---
 drivers/gpu/drm/msm/dp/dp_panel.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/msm/dp/dp_panel.c +5 -0
index 71db10c0f262..f1418722c549 100644
@@ -212,6 +212,11 @@ int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
 		if (drm_add_modes_noedid(connector, 640, 480))
 			drm_set_preferred_mode(connector, 640, 480);
 		mutex_unlock(&connector->dev->mode_config.mutex);
+	} else {
+		/* always add fail-safe mode as backup mode */
+		mutex_lock(&connector->dev->mode_config.mutex);
+		drm_add_modes_noedid(connector, 640, 480);
+		mutex_unlock(&connector->dev->mode_config.mutex);
 	}
 
 	if (panel->aux_cfg_update_done) {
Signature · 1 line
2.34.1
author maintainer
#570 lore raw

PATCH 570/1126 drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent

In reply to Greg Kroah-Hartman

From: Marijn Suijten <[email protected]>

[ Upstream commit 3a3ee71bd8e14c5e852c71f317eebfda8f88dff0 ]

All DSI PHY/PLL drivers were referencing their VCO parent clock by a global name, most of which don't exist or have been renamed. These clock drivers seem to function fine without that except the 14nm driver for sdm6xx [1].

At the same time all DTs provide a "ref" clock as per the requirements of dsi-phy-common.yaml, but the clock is never used. This patchset puts that clock to use without relying on a global clock name, so that all dependencies are explicitly defined in DT (the firmware) in the end.

Note that this patch intentionally breaks older firmware (DT) that relies on the clock to be found globally instead. The only affected platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is left in place to accommodate a more graceful transition period. All other platforms had the "ref" clock added to their phy node since its inception, or in a followup patch some time after. These patches wrongly assumed that the "ref" clock was actively used and have hence been listed as "Fixes:" below.
Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of 27MHz pxo clock, which has been addressed in [3].

It is expected that both [2] and [3] are applied to the tree well in advance of this patch such that any actual breakage is extremely unlikely, but might still occur if kernel upgrades are performed without the DT to match. After some time the fallback for msm8974 can be removed again as well.

[1]: https://lore.kernel.org/linux-arm-msm/[email protected]/
[2]: https://lore.kernel.org/linux-arm-msm/[email protected]/
[3]: https://lore.kernel.org/linux-arm-msm/[email protected]/

Fixes 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
Fixes 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Fixes 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c      | 4 +++-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c      | 4 +++-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      | 4 +++-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +++-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c       | 4 +++-
 5 files changed, 15 insertions(+), 5 deletions(-)
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +3 -1
index d8128f50b0dd..0b782cc18b3f 100644
@@ -562,7 +562,9 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm, struct clk_hw **prov
 	char clk_name[32], parent[32], vco_name[32];
 	char parent2[32], parent3[32], parent4[32];
 	struct clk_init_data vco_init = {
-		.parent_names = (const char *[]){ "xo" },
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "ref",
+		},
 		.num_parents = 1,
 		.name = vco_name,
 		.flags = CLK_IGNORE_UNUSED,
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +3 -1
index 7414966f198e..75557ac99adf 100644
@@ -802,7 +802,9 @@ static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm, struct clk_hw **prov
 {
 	char clk_name[32], parent[32], vco_name[32];
 	struct clk_init_data vco_init = {
-		.parent_names = (const char *[]){ "xo" },
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "ref",
+		},
 		.num_parents = 1,
 		.name = vco_name,
 		.flags = CLK_IGNORE_UNUSED,
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +3 -1
index 2da673a2add6..48eab80b548e 100644
@@ -521,7 +521,9 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
 {
 	char clk_name[32], parent1[32], parent2[32], vco_name[32];
 	struct clk_init_data vco_init = {
-		.parent_names = (const char *[]){ "xo" },
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "ref", .name = "xo",
+		},
 		.num_parents = 1,
 		.name = vco_name,
 		.flags = CLK_IGNORE_UNUSED,
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +3 -1
index 71ed4aa0dc67..fc56cdcc9ad6 100644
@@ -385,7 +385,9 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
 {
 	char *clk_name, *parent_name, *vco_name;
 	struct clk_init_data vco_init = {
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "ref",
+		},
 		.num_parents = 1,
 		.flags = CLK_IGNORE_UNUSED,
 		.ops = &clk_ops_dsi_pll_28nm_vco,
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +3 -1
index 079613d2aaa9..36eb6109cb88 100644
@@ -588,7 +588,9 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm, struct clk_hw **provide
 	char clk_name[32], parent[32], vco_name[32];
 	char parent2[32], parent3[32], parent4[32];
 	struct clk_init_data vco_init = {
-		.parent_names = (const char *[]){ "bi_tcxo" },
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "ref",
+		},
 		.num_parents = 1,
 		.name = vco_name,
 		.flags = CLK_IGNORE_UNUSED,
Signature · 1 line
2.34.1
author maintainer
#571 lore raw

PATCH 571/1126 drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit bb07af2ed2a47dc6c4d0681f275bb27d4f845465 ]

The dsi_7nm_phy_enable() disagrees with downstream for glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update programmed settings to match downstream driver. To remove the possibility for such errors in future drop less_than_1500_mhz assignment and specify settings explicitly.

Fixes 5ac178381d26 ("drm/msm/dsi: support CPHY mode for 7nm pll/phy")
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +14 -8
index 36eb6109cb88..6e506feb111f 100644
@@ -864,20 +864,26 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	/* Alter PHY configurations if data rate less than 1.5GHZ*/
 	less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
 
-	/* For C-PHY, no low power settings for lower clk rate */
-	if (phy->cphy_mode)
-		less_than_1500_mhz = false;
-
 	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
-		glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x00;
-		glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 :  0x3c;
+		if (phy->cphy_mode) {
+			glbl_rescode_top_ctrl = 0x00;
+			glbl_rescode_bot_ctrl = 0x3c;
+		} else {
+			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x00;
+			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 :  0x3c;
+		}
 		glbl_str_swi_cal_sel_ctrl = 0x00;
 		glbl_hstx_str_ctrl_0 = 0x88;
 	} else {
 		vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
-		glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
-		glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
+		if (phy->cphy_mode) {
+			glbl_str_swi_cal_sel_ctrl = 0x03;
+			glbl_hstx_str_ctrl_0 = 0x66;
+		} else {
+			glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
+			glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
+		}
 		glbl_rescode_top_ctrl = 0x03;
 		glbl_rescode_bot_ctrl = 0x3c;
 	}
Signature · 1 line
2.34.1
author maintainer
#572 lore raw

PATCH 572/1126 drm/msm/dpu: add DSPP blocks teardown

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit d5c5e78f217172e87d8fb2c3418dd8b58b4adfcb ]

Add missing calls to dpu_hw_dspp_destroy() to free resources allocated for DSPP hardware blocks.

Fixes e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c +8 -0
index f9c83d6e427a..24fbaf562d41 100644
@@ -35,6 +35,14 @@ int dpu_rm_destroy(struct dpu_rm *rm)
 {
 	int i;
 
+	for (i = 0; i < ARRAY_SIZE(rm->dspp_blks); i++) {
+		struct dpu_hw_dspp *hw;
+
+		if (rm->dspp_blks[i]) {
+			hw = to_dpu_hw_dspp(rm->dspp_blks[i]);
+			dpu_hw_dspp_destroy(hw);
+		}
+	}
 	for (i = 0; i < ARRAY_SIZE(rm->pingpong_blks); i++) {
 		struct dpu_hw_pingpong *hw;
 
Signature · 1 line
2.34.1
author maintainer
#573 lore raw

PATCH 573/1126 drm/msm/dpu: fix dp audio condition

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 1e0505a5a7a2fea243f8e6d7e13fcde65f9e41bc ]

DP audio enablement code which is comparing intf_type, DRM_MODE_ENCODER_TMDS (= 2) with DRM_MODE_CONNECTOR_DisplayPort (= 10). Which would never succeed. Fix it to check for DRM_MODE_ENCODER_TMDS.

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +1 -1
index 1e648db439f9..02d0fae1c6dc 100644
@@ -1099,7 +1099,7 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
 	}
 
 
-	if (dpu_enc->disp_info.intf_type == DRM_MODE_CONNECTOR_DisplayPort &&
+	if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_TMDS &&
 		dpu_enc->cur_master->hw_mdptop &&
 		dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select)
 		dpu_enc->cur_master->hw_mdptop->ops.intf_audio_select(
Signature · 1 line
2.34.1
author maintainer
#574 lore raw

PATCH 574/1126 drm/msm/dpu: remove msm_dp cached in dpu_encoder_virt

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit b78f30a5c8a396ca31a905982c8cd955cd35807e ]

Stop caching msm_dp instance in dpu_encoder_virt since it's not used now.

---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 5 -----
 1 file changed, 5 deletions(-)
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +0 -5
index 02d0fae1c6dc..16ae0cccbbb1 100644
@@ -168,7 +168,6 @@ enum dpu_enc_rc_states {
  * @vsync_event_work:		worker to handle vsync event for autorefresh
  * @topology:                   topology of the display
  * @idle_timeout:		idle timeout duration in milliseconds
- * @dp:				msm_dp pointer, for DP encoders
  */
 struct dpu_encoder_virt {
 	struct drm_encoder base;
@@ -207,8 +206,6 @@ struct dpu_encoder_virt {
 	struct msm_display_topology topology;
 
 	u32 idle_timeout;
-
-	struct msm_dp *dp;
 };
 
 #define to_dpu_encoder_virt(x) container_of(x, struct dpu_encoder_virt, base)
@@ -2128,8 +2125,6 @@ int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc,
 		timer_setup(&dpu_enc->vsync_event_timer,
 				dpu_encoder_vsync_event_handler,
 				0);
-	else if (disp_info->intf_type == DRM_MODE_ENCODER_TMDS)
-		dpu_enc->dp = priv->dp[disp_info->h_tile_instance[0]];
 
 	INIT_DELAYED_WORK(&dpu_enc->delayed_off_work,
 			dpu_encoder_off_work);
Signature · 1 line
2.34.1
author maintainer
#575 lore raw

PATCH 575/1126 drm/msm/dp: fix panel bridge attachment

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 4d793a02c4967ab14d4ae5e86a51ee02ed78921a ]

In commit 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display enable and disable") the DP driver received a drm_bridge instance, which is always attached to the encoder as a root bridge. However it conflicts with the panel_bridge support for eDP panels. The panel bridge attaches to the encoder before the "dp" bridge (DP driver's drm_bridge instance created in msm_dp_bridge_init()) has a chance to do so. Change panel bridge attachment to come after the "dp" bridge attachment (and to use it as a previous bridge).

Fixes 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Cc Kuogee Hsieh <[email protected]>
[db: fixed commit message according to Stephen's suggestions]
---
 drivers/gpu/drm/msm/dp/dp_drm.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/gpu/drm/msm/dp/dp_drm.c +11 -10
index d4d360d19eba..26ef41a4c1b6 100644
@@ -169,16 +169,6 @@ struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display)
 
 	drm_connector_attach_encoder(connector, dp_display->encoder);
 
-	if (dp_display->panel_bridge) {
-		ret = drm_bridge_attach(dp_display->encoder,
-					dp_display->panel_bridge, NULL,
-					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-		if (ret < 0) {
-			DRM_ERROR("failed to attach panel bridge: %d\n", ret);
-			return ERR_PTR(ret);
-		}
-	}
-
 	return connector;
 }
 
@@ -246,5 +236,16 @@ struct drm_bridge *msm_dp_bridge_init(struct msm_dp *dp_display, struct drm_devi
 		return ERR_PTR(rc);
 	}
 
+	if (dp_display->panel_bridge) {
+		rc = drm_bridge_attach(dp_display->encoder,
+					dp_display->panel_bridge, bridge,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+		if (rc < 0) {
+			DRM_ERROR("failed to attach panel bridge: %d\n", rc);
+			drm_bridge_remove(bridge);
+			return ERR_PTR(rc);
+		}
+	}
+
 	return bridge;
 }
Signature · 1 line
2.34.1
author maintainer
#576 lore raw

PATCH 576/1126 i40e: remove dead stores on XSK hotpath

In reply to Greg Kroah-Hartman

From: Alexander Lobakin <[email protected]>

[ Upstream commit 7e1b54d07751edcbf23c7211508abf5667b490ee ]

The 'if (ntu == rx_ring->count)' block in i40e_alloc_rx_buffers_zc() was previously residing in the loop, but after introducing the batched interface it is used only to wrap-around the NTU descriptor, thus no more need to assign 'xdp'.

'cleaned_count' in i40e_clean_rx_irq_zc() was previously being incremented in the loop, but after commit f12738b6ec06 ("i40e: remove unnecessary cleaned_count updates") it gets assigned only once after it, so the initialization can be dropped.

Fixes 6aab0bb0c5cd ("i40e: Use the xsk batched rx allocation interface")
Fixes f12738b6ec06 ("i40e: remove unnecessary cleaned_count updates")
---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_xsk.c +1 -2
index 67e9844e2076..e5e72b5bb619 100644
@@ -218,7 +218,6 @@ bool i40e_alloc_rx_buffers_zc(struct i40e_ring *rx_ring, u16 count)
 	ntu += nb_buffs;
 	if (ntu == rx_ring->count) {
 		rx_desc = I40E_RX_DESC(rx_ring, 0);
-		xdp = i40e_rx_bi(rx_ring, 0);
 		ntu = 0;
 	}
 
@@ -328,11 +327,11 @@ static void i40e_handle_xdp_result_zc(struct i40e_ring *rx_ring,
 int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 {
 	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
-	u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
 	u16 next_to_clean = rx_ring->next_to_clean;
 	u16 count_mask = rx_ring->count - 1;
 	unsigned int xdp_res, xdp_xmit = 0;
 	bool failure = false;
+	u16 cleaned_count;
 
 	while (likely(total_rx_packets < (unsigned int)budget)) {
 		union i40e_rx_desc *rx_desc;
Signature · 1 line
2.34.1
author maintainer
#577 lore raw

PATCH 577/1126 ath11k: Invalidate cached reo ring entry before accessing it

In reply to Greg Kroah-Hartman

From: Rameshkumar Sundaram <[email protected]>

[ Upstream commit f2180ccb52b5fd0876291ad2df37e2898cac18cf ]

REO2SW ring descriptor is currently allocated in cacheable memory. While reaping reo ring entries on second trial after updating head pointer, first entry is not invalidated before accessing it.

This results in host reaping and using cached descriptor which is already overwritten in memory by DMA device (HW).
Since the contents of descriptor(buffer id, peer info and other information bits) are outdated host throws errors like below while parsing corresponding MSDU's and drops them.

[347712.048904] ath11k_pci 0004:01:00.0: msdu_done bit in attention is not set
[349173.355503] ath11k_pci 0004:01:00.0: frame rx with invalid buf_id 962

Move the try_again: label above ath11k_hal_srng_access_begin() so that first entry will be invalidated and prefetched.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Fixes 6452f0a3d565 ("ath11k: allocate dst ring descriptors from cacheable memory")
---
 drivers/net/wireless/ath/ath11k/dp_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath11k/dp_rx.c +1 -1
index c212a789421e..e432f8dc05d6 100644
@@ -2642,9 +2642,9 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
 
 	spin_lock_bh(&srng->lock);
 
+try_again:
 	ath11k_hal_srng_access_begin(ab, srng);
 
-try_again:
 	while (likely(desc =
 	      (struct hal_reo_dest_ring *)ath11k_hal_srng_dst_get_next_entry(ab,
 									     srng))) {
Signature · 1 line
2.34.1
author maintainer
#578 lore raw

PATCH 578/1126 mips: Enable KCSAN

In reply to Greg Kroah-Hartman

From: Nemanja Rakovic <[email protected]>

[ Upstream commit e0a8b93efa2382d370be44bf289157de7e5dacb4 ]

This patch enables KCSAN for the 64-bit version. Updated rules for the incompatible compilation units (vdso, boot/compressed).

---
 arch/mips/Kconfig                  | 1 +
 arch/mips/boot/compressed/Makefile | 1 +
 arch/mips/vdso/Makefile            | 3 +++
 3 files changed, 5 insertions(+)
arch/mips/Kconfig +1 -0
index 058446f01487..651d4fe355da 100644
@@ -101,6 +101,7 @@ config MIPS
 	select TRACE_IRQFLAGS_SUPPORT
 	select VIRT_TO_BUS
 	select ARCH_HAS_ELFCORE_COMPAT
+	select HAVE_ARCH_KCSAN if 64BIT
 
 config MIPS_FIXUP_BIGPHYS_ADDR
 	bool
arch/mips/boot/compressed/Makefile +1 -0
index 5a15d51e8884..a35f78212ea9 100644
@@ -38,6 +38,7 @@ KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 KCOV_INSTRUMENT		:= n
 GCOV_PROFILE := n
 UBSAN_SANITIZE := n
+KASAN_SANITIZE			:= n
 
 # decompressor objects (linked with vmlinuz)
 vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/bswapsi.o
arch/mips/vdso/Makefile +3 -0
index d65f55f67e19..f72658b3a53f 100644
@@ -1,6 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 # Objects to go into the VDSO.
 
+# Sanitizer runtimes are unavailable and cannot be linked here.
+ KCSAN_SANITIZE			:= n
+
 # Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
 # the inclusion of generic Makefile.
 ARCH_REL_TYPE_ABS := R_MIPS_JUMP_SLOT|R_MIPS_GLOB_DAT
Signature · 1 line
2.34.1
author maintainer
#579 lore raw

PATCH 579/1126 dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS

In reply to Greg Kroah-Hartman

From: Aashish Sharma <[email protected]>

[ Upstream commit 6fc51504388c1a1a53db8faafe9fff78fccc7c87 ]

Explicitly convert unsigned int in the right of the conditional expression to int to match the left side operand and the return type, fixing the following compiler warning:

drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned type in conditional expression [-Wsign-compare]

Fixes c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
---
 drivers/md/dm-crypt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/dm-crypt.c +1 -1
index d4ae31558826..f51aea71cb03 100644
@@ -2590,7 +2590,7 @@ static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string
 
 static int get_key_size(char **key_string)
 {
-	return (*key_string[0] == ':') ? -EINVAL : strlen(*key_string) >> 1;
+	return (*key_string[0] == ':') ? -EINVAL : (int)(strlen(*key_string) >> 1);
 }
 
 #endif /* CONFIG_KEYS */
Signature · 1 line
2.34.1
author maintainer
#580 lore raw

PATCH 580/1126 vfio/pci: fix memory leak during D3hot to D0 transition

In reply to Greg Kroah-Hartman

From: Abhishek Sahu <[email protected]>

[ Upstream commit eadf88ecf6ac7d6a9f47a76c6055d9a1987a8991 ]

If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does not have No_Soft_Reset bit set in its PMCSR config register), then the current PCI state will be saved locally in 'vfio_pci_core_device::pm_save' during D0->D3hot transition and same will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being used and the pci_load_and_free_saved_state() will free the allocated memory.

But for reset related IOCTLs, vfio driver calls PCI reset-related API's which will internally change the PCI power state back to D0. So, when the guest resumes, then it will get the current state as D0 and it will skip the call to vfio_pci_set_power_state() for changing the power state to D0 explicitly. In this case, the memory pointed by 'pm_save' will never be freed. In a malicious sequence, the state changing to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be run in a loop and it can cause an OOM situation.

This patch frees the earlier allocated memory first before overwriting 'pm_save' to prevent the mentioned memory leak.

Fixes 51ef3a004b1e ("vfio/pci: Restore device state on PM transition")
---
 drivers/vfio/pci/vfio_pci_core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/vfio/pci/vfio_pci_core.c +13 -0
index f948e6cd2993..87b288affc13 100644
@@ -228,6 +228,19 @@ int vfio_pci_set_power_state(struct vfio_pci_core_device *vdev, pci_power_t stat
 	if (!ret) {
 		/* D3 might be unsupported via quirk, skip unless in D3 */
 		if (needs_save && pdev->current_state >= PCI_D3hot) {
+			/*
+			 * The current PCI state will be saved locally in
+			 * 'pm_save' during the D3hot transition. When the
+			 * device state is changed to D0 again with the current
+			 * function, then pci_store_saved_state() will restore
+			 * the state and will free the memory pointed by
+			 * 'pm_save'. There are few cases where the PCI power
+			 * state can be changed to D0 without the involvement
+			 * of the driver. For these cases, free the earlier
+			 * allocated memory first before overwriting 'pm_save'
+			 * to prevent the memory leak.
+			 */
+			kfree(vdev->pm_save);
 			vdev->pm_save = pci_store_saved_state(pdev);
 		} else if (needs_restore) {
 			pci_load_and_free_saved_state(pdev, &vdev->pm_save);
Signature · 1 line
2.34.1
author maintainer
#581 lore raw

PATCH 581/1126 vfio/pci: wake-up devices around reset functions

In reply to Greg Kroah-Hartman

From: Abhishek Sahu <[email protected]>

[ Upstream commit 26a17b12d7f3dd8a7aa45a290e5b46e9cc775ddf ]

If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does not have No_Soft_Reset bit set in its PMCSR config register), then the current PCI state will be saved locally in 'vfio_pci_core_device::pm_save' during D0->D3hot transition and same will be restored back during D3hot->D0 transition. For reset-related functionalities, vfio driver uses PCI reset API's. These API's internally change the PCI power state back to D0 first if the device power state is non-D0. This state change to D0 will happen without the involvement of vfio driver.

Let's consider the following example:

1. The device is in D3hot.
2. User invokes VFIO_DEVICE_RESET ioctl.
3. pci_try_reset_function() will be called which internally invokes pci_dev_save_and_disable().
4. pci_set_power_state(dev, PCI_D0) will be called first.
5. pci_save_state() will happen then.

Now, for the devices which has NoSoftRst-, the pci_set_power_state() can trigger soft reset and the original PCI config state will be lost at step (4) and this state cannot be restored again. This original PCI state can include any setting which is performed by SBIOS or host linux kernel (for example LTR, ASPM L1 substates, etc.). When this soft reset will be triggered, then all these settings will be reset, and the device state saved at step (5) will also have this setting cleared so it cannot be restored. Since the vfio driver only exposes limited PCI capabilities to its user, so the vfio driver user also won't have the option to save and restore these capabilities state either and these original settings will be permanently lost.

For pci_reset_bus() also, we can have the above situation. The other functions/devices can be in D3hot and the reset will change the power state of all devices to D0 without the involvement of vfio driver.

So, before calling any reset-related API's, we need to make sure that the device state is D0. This is mainly to preserve the state around soft reset.

For vfio_pci_core_disable(), we use __pci_reset_function_locked() which internally can use pci_pm_reset() for the function reset. pci_pm_reset() requires the device power state to be in D0, otherwise it returns error.

This patch changes the device power state to D0 by invoking vfio_pci_set_power_state() explicitly before calling any reset related API's.

Fixes 51ef3a004b1e ("vfio/pci: Restore device state on PM transition")
---
 drivers/vfio/pci/vfio_pci_core.c | 48 ++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
drivers/vfio/pci/vfio_pci_core.c +48 -0
index 87b288affc13..2e6409cc11ad 100644
@@ -335,6 +335,17 @@ void vfio_pci_core_disable(struct vfio_pci_core_device *vdev)
 	/* For needs_reset */
 	lockdep_assert_held(&vdev->vdev.dev_set->lock);
 
+	/*
+	 * This function can be invoked while the power state is non-D0.
+	 * This function calls __pci_reset_function_locked() which internally
+	 * can use pci_pm_reset() for the function reset. pci_pm_reset() will
+	 * fail if the power state is non-D0. Also, for the devices which
+	 * have NoSoftRst-, the reset function can cause the PCI config space
+	 * reset without restoring the original state (saved locally in
+	 * 'vdev->pm_save').
+	 */
+	vfio_pci_set_power_state(vdev, PCI_D0);
+
 	/* Stop the device from further DMA */
 	pci_clear_master(pdev);
 
@@ -934,6 +945,19 @@ long vfio_pci_core_ioctl(struct vfio_device *core_vdev, unsigned int cmd,
 			return -EINVAL;
 
 		vfio_pci_zap_and_down_write_memory_lock(vdev);
+
+		/*
+		 * This function can be invoked while the power state is non-D0.
+		 * If pci_try_reset_function() has been called while the power
+		 * state is non-D0, then pci_try_reset_function() will
+		 * internally set the power state to D0 without vfio driver
+		 * involvement. For the devices which have NoSoftRst-, the
+		 * reset function can cause the PCI config space reset without
+		 * restoring the original state (saved locally in
+		 * 'vdev->pm_save').
+		 */
+		vfio_pci_set_power_state(vdev, PCI_D0);
+
 		ret = pci_try_reset_function(vdev->pdev);
 		up_write(&vdev->memory_lock);
 
@@ -2068,6 +2092,18 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
 	}
 	cur_mem = NULL;
 
+	/*
+	 * The pci_reset_bus() will reset all the devices in the bus.
+	 * The power state can be non-D0 for some of the devices in the bus.
+	 * For these devices, the pci_reset_bus() will internally set
+	 * the power state to D0 without vfio driver involvement.
+	 * For the devices which have NoSoftRst-, the reset function can
+	 * cause the PCI config space reset without restoring the original
+	 * state (saved locally in 'vdev->pm_save').
+	 */
+	list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list)
+		vfio_pci_set_power_state(cur, PCI_D0);
+
 	ret = pci_reset_bus(pdev);
 
 err_undo:
@@ -2121,6 +2157,18 @@ static bool vfio_pci_dev_set_try_reset(struct vfio_device_set *dev_set)
 	if (!pdev)
 		return false;
 
+	/*
+	 * The pci_reset_bus() will reset all the devices in the bus.
+	 * The power state can be non-D0 for some of the devices in the bus.
+	 * For these devices, the pci_reset_bus() will internally set
+	 * the power state to D0 without vfio driver involvement.
+	 * For the devices which have NoSoftRst-, the reset function can
+	 * cause the PCI config space reset without restoring the original
+	 * state (saved locally in 'vdev->pm_save').
+	 */
+	list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list)
+		vfio_pci_set_power_state(cur, PCI_D0);
+
 	ret = pci_reset_bus(pdev);
 	if (ret)
 		return false;
Signature · 1 line
2.34.1
author maintainer
#582 lore raw

PATCH 582/1126 scsi: fnic: Fix a tracing statement

In reply to Greg Kroah-Hartman

From: Bart Van Assche <[email protected]>

[ Upstream commit 3032ed77a28913203a4fe0ab8f05752331af79b3 ]

Report both the command flags and command state instead of only the command state.

---
 drivers/scsi/fnic/fnic_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +1 -1
index 40a52feb315d..65047806a541 100644
@@ -604,7 +604,7 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc)
 
 	FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
 		  tag, sc, io_req, sg_count, cmd_trace,
-		  (((u64)CMD_FLAGS(sc) >> 32) | CMD_STATE(sc)));
+		  (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
 
 	/* if only we issued IO, will we have the io lock */
 	if (io_lock_acquired)
Signature · 1 line
2.34.1
author maintainer
#583 lore raw

PATCH 583/1126 scsi: pm8001: Fix command initialization in pm80XX_send_read_log()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit 1a37b6738b58d86f6b144b3fc754ace0f2e0166d ]

Since the sata_cmd struct is zeroed out before its fields are initialized, there is no need for using "|=" to initialize the ncqtag_atap_dir_m field. Using a standard assignment removes the sparse warning:

warning: invalid assignment: |=

Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32() to generate the assigned value.

---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
 drivers/scsi/pm8001/pm80xx_hwi.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +1 -1
index 9ec310b795c3..d978f7226206 100644
@@ -1865,7 +1865,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
 
 	sata_cmd.tag = cpu_to_le32(ccb_tag);
 	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	sata_cmd.ncqtag_atap_dir_m |= ((0x1 << 7) | (0x5 << 9));
+	sata_cmd.ncqtag_atap_dir_m = cpu_to_le32((0x1 << 7) | (0x5 << 9));
 	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
 
 	res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
drivers/scsi/pm8001/pm80xx_hwi.c +1 -1
index 9d20f8009b89..ec6b970e05a1 100644
@@ -1882,7 +1882,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
 
 	sata_cmd.tag = cpu_to_le32(ccb_tag);
 	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9));
+	sata_cmd.ncqtag_atap_dir_m_dad = cpu_to_le32(((0x1 << 7) | (0x5 << 9)));
 	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
 
 	res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
Signature · 1 line
2.34.1
author maintainer
#584 lore raw

PATCH 584/1126 scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit cd2268a180117aa8ebb23e090ba204324b2d0e93 ]

The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32. Assigning a value to it should thus use cpu_to_le32(). This fixes the sparse warning:

warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m got int

---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/pm8001/pm8001_hwi.c +1 -1
index d978f7226206..43c2ab90f711 100644
@@ -4626,7 +4626,7 @@ int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
 	memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
 	sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
 	if (pm8001_ha->chip_id != chip_8001)
-		sspTMCmd.ds_ads_m = 0x08;
+		sspTMCmd.ds_ads_m = cpu_to_le32(0x08);
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd,
 			sizeof(sspTMCmd), 0);
Signature · 1 line
2.34.1
author maintainer
#585 lore raw

PATCH 585/1126 scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit bb225b12dbcc82d53d637d10b8d70b64494f8c16 ]

The fields of the set_ctrl_cfg_req structure have the __le32 type, so use cpu_to_le32() to assign them. This removes the sparse warnings:

warning: incorrect type in assignment (different base types)
expected restricted __le32
got unsigned int

Fixes 842784e0d15b ("pm80xx: Update For Thermal Page Code")
Fixes f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +5 -3
index ec6b970e05a1..94af89d0b362 100644
@@ -1203,9 +1203,11 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
 	else
 		page_code = THERMAL_PAGE_CODE_8H;
 
-	payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
-				(THERMAL_ENABLE << 8) | page_code;
-	payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
+	payload.cfg_pg[0] =
+		cpu_to_le32((THERMAL_LOG_ENABLE << 9) |
+			    (THERMAL_ENABLE << 8) | page_code);
+	payload.cfg_pg[1] =
+		cpu_to_le32((LTEMPHIL << 24) | (RTEMPHIL << 8));
 
 	pm8001_dbg(pm8001_ha, DEV,
 		   "Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
Signature · 1 line
2.34.1
author maintainer
#586 lore raw

PATCH 586/1126 scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit ca374f5d92b8ae778f6a37dd3e7ed809bbf7a953 ]

All fields of the SASProtocolTimerConfig structure have the __le32 type. As such, use cpu_to_le32() to initialize them. This change suppresses many sparse warnings:

warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [usertype] pageCode got int

Note that the check to limit the value of the STP_IDLE_TMO field is removed as this field is initialized using the fixed (and small) value defined by the STP_IDLE_TIME macro.

The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig structure fileds are changed to use le32_to_cpu() to present the values in human readable form.

Fixes a6cb3d012b98 ("[SCSI] pm80xx: thermal, sas controller config and error handling update")
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 52 +++++++++++++++-----------------
 1 file changed, 25 insertions(+), 27 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +25 -27
index 94af89d0b362..19f9fb4da9c1 100644
@@ -1247,43 +1247,41 @@ pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 	payload.tag = cpu_to_le32(tag);
 
-	SASConfigPage.pageCode        =  SAS_PROTOCOL_TIMER_CONFIG_PAGE;
-	SASConfigPage.MST_MSI         =  3 << 15;
-	SASConfigPage.STP_SSP_MCT_TMO =  (STP_MCT_TMO << 16) | SSP_MCT_TMO;
-	SASConfigPage.STP_FRM_TMO     = (SAS_MAX_OPEN_TIME << 24) |
-				(SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER;
-	SASConfigPage.STP_IDLE_TMO    =  STP_IDLE_TIME;
-
-	if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF)
-		SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF;
-
-
-	SASConfigPage.OPNRJT_RTRY_INTVL =         (SAS_MFD << 16) |
-						SAS_OPNRJT_RTRY_INTVL;
-	SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO =  (SAS_DOPNRJT_RTRY_TMO << 16)
-						| SAS_COPNRJT_RTRY_TMO;
-	SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR =  (SAS_DOPNRJT_RTRY_THR << 16)
-						| SAS_COPNRJT_RTRY_THR;
-	SASConfigPage.MAX_AIP =  SAS_MAX_AIP;
+	SASConfigPage.pageCode = cpu_to_le32(SAS_PROTOCOL_TIMER_CONFIG_PAGE);
+	SASConfigPage.MST_MSI = cpu_to_le32(3 << 15);
+	SASConfigPage.STP_SSP_MCT_TMO =
+		cpu_to_le32((STP_MCT_TMO << 16) | SSP_MCT_TMO);
+	SASConfigPage.STP_FRM_TMO =
+		cpu_to_le32((SAS_MAX_OPEN_TIME << 24) |
+			    (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER);
+	SASConfigPage.STP_IDLE_TMO = cpu_to_le32(STP_IDLE_TIME);
+
+	SASConfigPage.OPNRJT_RTRY_INTVL =
+		cpu_to_le32((SAS_MFD << 16) | SAS_OPNRJT_RTRY_INTVL);
+	SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO =
+		cpu_to_le32((SAS_DOPNRJT_RTRY_TMO << 16) | SAS_COPNRJT_RTRY_TMO);
+	SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR =
+		cpu_to_le32((SAS_DOPNRJT_RTRY_THR << 16) | SAS_COPNRJT_RTRY_THR);
+	SASConfigPage.MAX_AIP = cpu_to_le32(SAS_MAX_AIP);
 
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.pageCode 0x%08x\n",
-		   SASConfigPage.pageCode);
+		   le32_to_cpu(SASConfigPage.pageCode));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MST_MSI  0x%08x\n",
-		   SASConfigPage.MST_MSI);
+		   le32_to_cpu(SASConfigPage.MST_MSI));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_SSP_MCT_TMO  0x%08x\n",
-		   SASConfigPage.STP_SSP_MCT_TMO);
+		   le32_to_cpu(SASConfigPage.STP_SSP_MCT_TMO));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_FRM_TMO  0x%08x\n",
-		   SASConfigPage.STP_FRM_TMO);
+		   le32_to_cpu(SASConfigPage.STP_FRM_TMO));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_IDLE_TMO  0x%08x\n",
-		   SASConfigPage.STP_IDLE_TMO);
+		   le32_to_cpu(SASConfigPage.STP_IDLE_TMO));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.OPNRJT_RTRY_INTVL  0x%08x\n",
-		   SASConfigPage.OPNRJT_RTRY_INTVL);
+		   le32_to_cpu(SASConfigPage.OPNRJT_RTRY_INTVL));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO  0x%08x\n",
-		   SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO);
+		   le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR  0x%08x\n",
-		   SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR);
+		   le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
 	pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MAX_AIP  0x%08x\n",
-		   SASConfigPage.MAX_AIP);
+		   le32_to_cpu(SASConfigPage.MAX_AIP));
 
 	memcpy(&payload.cfg_pg, &SASConfigPage,
 			 sizeof(SASProtocolTimerConfig_t));
Signature · 1 line
2.34.1
author maintainer
#587 lore raw

PATCH 587/1126 scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit f8b12dfb476dad38ce755aaf5e2df46f06f1822e ]

All fields of the kek_mgmt_req structure have the type __le32. So make sure to use cpu_to_le32() to initialize them. This suppresses the sparse warning:

warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] new_curidx_ksop got int

Fixes f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +4 -3
index 19f9fb4da9c1..cbb0cd2e71c1 100644
@@ -1407,12 +1407,13 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
 	/* Currently only one key is used. New KEK index is 1.
 	 * Current KEK index is 1. Store KEK to NVRAM is 1.
 	 */
-	payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
-					KEK_MGMT_SUBOP_KEYCARDUPDATE);
+	payload.new_curidx_ksop =
+		cpu_to_le32(((1 << 24) | (1 << 16) | (1 << 8) |
+			     KEK_MGMT_SUBOP_KEYCARDUPDATE));
 
 	pm8001_dbg(pm8001_ha, DEV,
 		   "Saving Encryption info to flash. payload 0x%x\n",
-		   payload.new_curidx_ksop);
+		   le32_to_cpu(payload.new_curidx_ksop));
 
 	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
 			sizeof(payload), 0);
Signature · 1 line
2.34.1
author maintainer
#588 lore raw

PATCH 588/1126 scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit 970404cc5744b1033b6ee601be4ef0e2d1fbcf72 ]

Make sure that the __le32 fields of struct ssp_ini_io_start_req are manipulated after applying the correct endian conversion. That is, use cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field value. In particular, make sure that the calculations for the 4G boundary check are done using CPU endianness and *not* little endian values. With these fixes, many sparse warnings are removed.

While at it, add blank lines after variable declarations and in some other places to make this code more readable.

---
 drivers/scsi/pm8001/pm80xx_hwi.c | 41 +++++++++++++++++++-------------
 1 file changed, 25 insertions(+), 16 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +25 -16
index cbb0cd2e71c1..86c32e22f48e 100644
@@ -4380,13 +4380,15 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
 	struct ssp_ini_io_start_req ssp_cmd;
 	u32 tag = ccb->ccb_tag;
 	int ret;
-	u64 phys_addr, start_addr, end_addr;
+	u64 phys_addr, end_addr;
 	u32 end_addr_high, end_addr_low;
 	struct inbound_queue_table *circularQ;
 	u32 q_index, cpu_id;
 	u32 opc = OPC_INB_SSPINIIOSTART;
+
 	memset(&ssp_cmd, 0, sizeof(ssp_cmd));
 	memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+
 	/* data address domain added for spcv; set to 0 by host,
 	 * used internally by controller
 	 * 0 for SAS 1.1 and SAS 2.0 compatible TLR
@@ -4397,7 +4399,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
 	ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
 	ssp_cmd.tag = cpu_to_le32(tag);
 	if (task->ssp_task.enable_first_burst)
-		ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+		ssp_cmd.ssp_iu.efb_prio_attr = 0x80;
 	ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
 	ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
 	memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
@@ -4429,21 +4431,24 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
 			ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
 		} else if (task->num_scatter == 1) {
 			u64 dma_addr = sg_dma_address(task->scatter);
+
 			ssp_cmd.enc_addr_low =
 				cpu_to_le32(lower_32_bits(dma_addr));
 			ssp_cmd.enc_addr_high =
 				cpu_to_le32(upper_32_bits(dma_addr));
 			ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
 			ssp_cmd.enc_esgl = 0;
+
 			/* Check 4G Boundary */
-			start_addr = cpu_to_le64(dma_addr);
-			end_addr = (start_addr + ssp_cmd.enc_len) - 1;
-			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
-			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
-			if (end_addr_high != ssp_cmd.enc_addr_high) {
+			end_addr = dma_addr + le32_to_cpu(ssp_cmd.enc_len) - 1;
+			end_addr_low = lower_32_bits(end_addr);
+			end_addr_high = upper_32_bits(end_addr);
+
+			if (end_addr_high != le32_to_cpu(ssp_cmd.enc_addr_high)) {
 				pm8001_dbg(pm8001_ha, FAIL,
 					   "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
-					   start_addr, ssp_cmd.enc_len,
+					   dma_addr,
+					   le32_to_cpu(ssp_cmd.enc_len),
 					   end_addr_high, end_addr_low);
 				pm8001_chip_make_sg(task->scatter, 1,
 					ccb->buf_prd);
@@ -4452,7 +4457,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
 					cpu_to_le32(lower_32_bits(phys_addr));
 				ssp_cmd.enc_addr_high =
 					cpu_to_le32(upper_32_bits(phys_addr));
-				ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+				ssp_cmd.enc_esgl = cpu_to_le32(1U<<31);
 			}
 		} else if (task->num_scatter == 0) {
 			ssp_cmd.enc_addr_low = 0;
@@ -4460,8 +4465,10 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
 			ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
 			ssp_cmd.enc_esgl = 0;
 		}
+
 		/* XTS mode. All other fields are 0 */
-		ssp_cmd.key_cmode = 0x6 << 4;
+		ssp_cmd.key_cmode = cpu_to_le32(0x6 << 4);
+
 		/* set tweak values. Should be the start lba */
 		ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cmd->cmnd[2] << 24) |
 						(task->ssp_task.cmd->cmnd[3] << 16) |
@@ -4483,20 +4490,22 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
 			ssp_cmd.esgl = cpu_to_le32(1<<31);
 		} else if (task->num_scatter == 1) {
 			u64 dma_addr = sg_dma_address(task->scatter);
+
 			ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
 			ssp_cmd.addr_high =
 				cpu_to_le32(upper_32_bits(dma_addr));
 			ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
 			ssp_cmd.esgl = 0;
+
 			/* Check 4G Boundary */
-			start_addr = cpu_to_le64(dma_addr);
-			end_addr = (start_addr + ssp_cmd.len) - 1;
-			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
-			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
-			if (end_addr_high != ssp_cmd.addr_high) {
+			end_addr = dma_addr + le32_to_cpu(ssp_cmd.len) - 1;
+			end_addr_low = lower_32_bits(end_addr);
+			end_addr_high = upper_32_bits(end_addr);
+			if (end_addr_high != le32_to_cpu(ssp_cmd.addr_high)) {
 				pm8001_dbg(pm8001_ha, FAIL,
 					   "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
-					   start_addr, ssp_cmd.len,
+					   dma_addr,
+					   le32_to_cpu(ssp_cmd.len),
 					   end_addr_high, end_addr_low);
 				pm8001_chip_make_sg(task->scatter, 1,
 					ccb->buf_prd);
Signature · 1 line
2.34.1
author maintainer
#589 lore raw

PATCH 589/1126 scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit fd6d0e376211d7ed759db96b0fbd9a1cee67d462 ]

Make sure that the __le32 fields of struct sata_cmd are manipulated after applying the correct endian conversion. That is, use cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field value. In particular, make sure that the calculations for the 4G boundary check are done using CPU endianness and *not* little endian values. With these fixes, many sparse warnings are removed.

While at it, fix some code identation and add blank lines after variable declarations and in some other places to make this code more readable.

---
 drivers/scsi/pm8001/pm80xx_hwi.c | 82 ++++++++++++++++++--------------
 1 file changed, 45 insertions(+), 37 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +45 -37
index 86c32e22f48e..0b4261735c03 100644
@@ -4540,7 +4540,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	u32 q_index, cpu_id;
 	struct sata_start_req sata_cmd;
 	u32 hdr_tag, ncg_tag = 0;
-	u64 phys_addr, start_addr, end_addr;
+	u64 phys_addr, end_addr;
 	u32 end_addr_high, end_addr_low;
 	u32 ATAP = 0x0;
 	u32 dir;
@@ -4601,32 +4601,38 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 			pm8001_chip_make_sg(task->scatter,
 						ccb->n_elem, ccb->buf_prd);
 			phys_addr = ccb->ccb_dma_handle;
-			sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
-			sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
+			sata_cmd.enc_addr_low =
+				cpu_to_le32(lower_32_bits(phys_addr));
+			sata_cmd.enc_addr_high =
+				cpu_to_le32(upper_32_bits(phys_addr));
 			sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
 		} else if (task->num_scatter == 1) {
 			u64 dma_addr = sg_dma_address(task->scatter);
-			sata_cmd.enc_addr_low = lower_32_bits(dma_addr);
-			sata_cmd.enc_addr_high = upper_32_bits(dma_addr);
+
+			sata_cmd.enc_addr_low =
+				cpu_to_le32(lower_32_bits(dma_addr));
+			sata_cmd.enc_addr_high =
+				cpu_to_le32(upper_32_bits(dma_addr));
 			sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
 			sata_cmd.enc_esgl = 0;
+
 			/* Check 4G Boundary */
-			start_addr = cpu_to_le64(dma_addr);
-			end_addr = (start_addr + sata_cmd.enc_len) - 1;
-			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
-			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
-			if (end_addr_high != sata_cmd.enc_addr_high) {
+			end_addr = dma_addr + le32_to_cpu(sata_cmd.enc_len) - 1;
+			end_addr_low = lower_32_bits(end_addr);
+			end_addr_high = upper_32_bits(end_addr);
+			if (end_addr_high != le32_to_cpu(sata_cmd.enc_addr_high)) {
 				pm8001_dbg(pm8001_ha, FAIL,
 					   "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
-					   start_addr, sata_cmd.enc_len,
+					   dma_addr,
+					   le32_to_cpu(sata_cmd.enc_len),
 					   end_addr_high, end_addr_low);
 				pm8001_chip_make_sg(task->scatter, 1,
 					ccb->buf_prd);
 				phys_addr = ccb->ccb_dma_handle;
 				sata_cmd.enc_addr_low =
-					lower_32_bits(phys_addr);
+					cpu_to_le32(lower_32_bits(phys_addr));
 				sata_cmd.enc_addr_high =
-					upper_32_bits(phys_addr);
+					cpu_to_le32(upper_32_bits(phys_addr));
 				sata_cmd.enc_esgl =
 					cpu_to_le32(1 << 31);
 			}
@@ -4637,7 +4643,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 			sata_cmd.enc_esgl = 0;
 		}
 		/* XTS mode. All other fields are 0 */
-		sata_cmd.key_index_mode = 0x6 << 4;
+		sata_cmd.key_index_mode = cpu_to_le32(0x6 << 4);
+
 		/* set tweak values. Should be the start lba */
 		sata_cmd.twk_val0 =
 			cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
@@ -4663,31 +4670,31 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 			phys_addr = ccb->ccb_dma_handle;
 			sata_cmd.addr_low = lower_32_bits(phys_addr);
 			sata_cmd.addr_high = upper_32_bits(phys_addr);
-			sata_cmd.esgl = cpu_to_le32(1 << 31);
+			sata_cmd.esgl = cpu_to_le32(1U << 31);
 		} else if (task->num_scatter == 1) {
 			u64 dma_addr = sg_dma_address(task->scatter);
+
 			sata_cmd.addr_low = lower_32_bits(dma_addr);
 			sata_cmd.addr_high = upper_32_bits(dma_addr);
 			sata_cmd.len = cpu_to_le32(task->total_xfer_len);
 			sata_cmd.esgl = 0;
+
 			/* Check 4G Boundary */
-			start_addr = cpu_to_le64(dma_addr);
-			end_addr = (start_addr + sata_cmd.len) - 1;
-			end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
-			end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+			end_addr = dma_addr + le32_to_cpu(sata_cmd.len) - 1;
+			end_addr_low = lower_32_bits(end_addr);
+			end_addr_high = upper_32_bits(end_addr);
 			if (end_addr_high != sata_cmd.addr_high) {
 				pm8001_dbg(pm8001_ha, FAIL,
 					   "The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
-					   start_addr, sata_cmd.len,
+					   dma_addr,
+					   le32_to_cpu(sata_cmd.len),
 					   end_addr_high, end_addr_low);
 				pm8001_chip_make_sg(task->scatter, 1,
 					ccb->buf_prd);
 				phys_addr = ccb->ccb_dma_handle;
-				sata_cmd.addr_low =
-					lower_32_bits(phys_addr);
-				sata_cmd.addr_high =
-					upper_32_bits(phys_addr);
-				sata_cmd.esgl = cpu_to_le32(1 << 31);
+				sata_cmd.addr_low = lower_32_bits(phys_addr);
+				sata_cmd.addr_high = upper_32_bits(phys_addr);
+				sata_cmd.esgl = cpu_to_le32(1U << 31);
 			}
 		} else if (task->num_scatter == 0) {
 			sata_cmd.addr_low = 0;
@@ -4695,27 +4702,28 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 			sata_cmd.len = cpu_to_le32(task->total_xfer_len);
 			sata_cmd.esgl = 0;
 		}
+
 		/* scsi cdb */
 		sata_cmd.atapi_scsi_cdb[0] =
 			cpu_to_le32(((task->ata_task.atapi_packet[0]) |
-			(task->ata_task.atapi_packet[1] << 8) |
-			(task->ata_task.atapi_packet[2] << 16) |
-			(task->ata_task.atapi_packet[3] << 24)));
+				     (task->ata_task.atapi_packet[1] << 8) |
+				     (task->ata_task.atapi_packet[2] << 16) |
+				     (task->ata_task.atapi_packet[3] << 24)));
 		sata_cmd.atapi_scsi_cdb[1] =
 			cpu_to_le32(((task->ata_task.atapi_packet[4]) |
-			(task->ata_task.atapi_packet[5] << 8) |
-			(task->ata_task.atapi_packet[6] << 16) |
-			(task->ata_task.atapi_packet[7] << 24)));
+				     (task->ata_task.atapi_packet[5] << 8) |
+				     (task->ata_task.atapi_packet[6] << 16) |
+				     (task->ata_task.atapi_packet[7] << 24)));
 		sata_cmd.atapi_scsi_cdb[2] =
 			cpu_to_le32(((task->ata_task.atapi_packet[8]) |
-			(task->ata_task.atapi_packet[9] << 8) |
-			(task->ata_task.atapi_packet[10] << 16) |
-			(task->ata_task.atapi_packet[11] << 24)));
+				     (task->ata_task.atapi_packet[9] << 8) |
+				     (task->ata_task.atapi_packet[10] << 16) |
+				     (task->ata_task.atapi_packet[11] << 24)));
 		sata_cmd.atapi_scsi_cdb[3] =
 			cpu_to_le32(((task->ata_task.atapi_packet[12]) |
-			(task->ata_task.atapi_packet[13] << 8) |
-			(task->ata_task.atapi_packet[14] << 16) |
-			(task->ata_task.atapi_packet[15] << 24)));
+				     (task->ata_task.atapi_packet[13] << 8) |
+				     (task->ata_task.atapi_packet[14] << 16) |
+				     (task->ata_task.atapi_packet[15] << 24)));
 	}
 
 	/* Check for read log for failed drive and return */
Signature · 1 line
2.34.1
author maintainer
#590 lore raw

PATCH 590/1126 scsi: pm8001: Fix NCQ NON DATA command task initialization

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit aa028141ab0bc62c44a84d42f09db35d82df82a2 ]

In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all tasks with a DMA direction of DMA_NONE (no data transfer) are initialized using the ATAP value 0x04. However, NCQ NON DATA commands, while being DMA_NONE commands are NCQ commands and need to be initialized using the value 0x07 for ATAP, similarly to other NCQ commands.

Make sure that NCQ NON DATA command tasks are initialized similarly to other NCQ commands by also testing the task "use_ncq" field in addition to the DMA direction. While at it, reorganize the code into a chain of if - else if - else to avoid useless affectations and debug messages.

---
 drivers/scsi/pm8001/pm8001_hwi.c | 14 +++++++-------
 drivers/scsi/pm8001/pm80xx_hwi.c | 13 ++++++-------
 2 files changed, 13 insertions(+), 14 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +7 -7
index 43c2ab90f711..9d982eb970fe 100644
@@ -4271,22 +4271,22 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	u32  opc = OPC_INB_SATA_HOST_OPSTART;
 	memset(&sata_cmd, 0, sizeof(sata_cmd));
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
-	if (task->data_dir == DMA_NONE) {
+
+	if (task->data_dir == DMA_NONE && !task->ata_task.use_ncq) {
 		ATAP = 0x04;  /* no data*/
 		pm8001_dbg(pm8001_ha, IO, "no data\n");
 	} else if (likely(!task->ata_task.device_control_reg_update)) {
-		if (task->ata_task.dma_xfer) {
+		if (task->ata_task.use_ncq &&
+		    dev->sata_dev.class != ATA_DEV_ATAPI) {
+			ATAP = 0x07; /* FPDMA */
+			pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
+		} else if (task->ata_task.dma_xfer) {
 			ATAP = 0x06; /* DMA */
 			pm8001_dbg(pm8001_ha, IO, "DMA\n");
 		} else {
 			ATAP = 0x05; /* PIO*/
 			pm8001_dbg(pm8001_ha, IO, "PIO\n");
 		}
-		if (task->ata_task.use_ncq &&
-			dev->sata_dev.class != ATA_DEV_ATAPI) {
-			ATAP = 0x07; /* FPDMA */
-			pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
-		}
 	}
 	if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
 		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
drivers/scsi/pm8001/pm80xx_hwi.c +6 -7
index 0b4261735c03..4c19691a2bce 100644
@@ -4552,22 +4552,21 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 	q_index = (u32) (cpu_id) % (pm8001_ha->max_q_num);
 	circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
 
-	if (task->data_dir == DMA_NONE) {
+	if (task->data_dir == DMA_NONE && !task->ata_task.use_ncq) {
 		ATAP = 0x04; /* no data*/
 		pm8001_dbg(pm8001_ha, IO, "no data\n");
 	} else if (likely(!task->ata_task.device_control_reg_update)) {
-		if (task->ata_task.dma_xfer) {
+		if (task->ata_task.use_ncq &&
+		    dev->sata_dev.class != ATA_DEV_ATAPI) {
+			ATAP = 0x07; /* FPDMA */
+			pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
+		} else if (task->ata_task.dma_xfer) {
 			ATAP = 0x06; /* DMA */
 			pm8001_dbg(pm8001_ha, IO, "DMA\n");
 		} else {
 			ATAP = 0x05; /* PIO*/
 			pm8001_dbg(pm8001_ha, IO, "PIO\n");
 		}
-		if (task->ata_task.use_ncq &&
-		    dev->sata_dev.class != ATA_DEV_ATAPI) {
-			ATAP = 0x07; /* FPDMA */
-			pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
-		}
 	}
 	if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
 		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
Signature · 1 line
2.34.1
author maintainer
#591 lore raw

PATCH 591/1126 scsi: pm8001: Fix NCQ NON DATA command completion handling

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit 1d6736c3e162061dc811c76e605f35ef3234bffa ]

NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a register-device-to-host-FIS response is expected for it.

However, for an IO_SUCCESS case, mpi_sata_completion() expects a set-device-bits-FIS for any ata task with an use_ncq field true, which includes NCQ NON DATA commands.

Fix this to correctly treat NCQ NON DATA commands as non-data by also testing for the DMA_NONE DMA direction.

---
 drivers/scsi/pm8001/pm8001_hwi.c | 3 ++-
 drivers/scsi/pm8001/pm80xx_hwi.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +2 -1
index 9d982eb970fe..8095eb0b04f7 100644
@@ -2418,7 +2418,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 				len = sizeof(struct pio_setup_fis);
 				pm8001_dbg(pm8001_ha, IO,
 					   "PIO read len = %d\n", len);
-			} else if (t->ata_task.use_ncq) {
+			} else if (t->ata_task.use_ncq &&
+				   t->data_dir != DMA_NONE) {
 				len = sizeof(struct set_dev_bits_fis);
 				pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
 					   len);
drivers/scsi/pm8001/pm80xx_hwi.c +2 -1
index 4c19691a2bce..a5a1db6ed463 100644
@@ -2511,7 +2511,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
 				len = sizeof(struct pio_setup_fis);
 				pm8001_dbg(pm8001_ha, IO,
 					   "PIO read len = %d\n", len);
-			} else if (t->ata_task.use_ncq) {
+			} else if (t->ata_task.use_ncq &&
+				   t->data_dir != DMA_NONE) {
 				len = sizeof(struct set_dev_bits_fis);
 				pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
 					   len);
Signature · 1 line
2.34.1
author maintainer
#592 lore raw

PATCH 592/1126 scsi: pm8001: Fix abort all task initialization

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit 7f12845c8389855dbcc67baa068b6832dc4a396e ]

In pm80xx_send_abort_all(), the n_elem field of the ccb used is not initialized to 0. This missing initialization sometimes lead to the task completion path seeing the ccb with a non-zero n_elem resulting in the execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(), causing a crash such as:

[  197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[  197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[  197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[  197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[  197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[  197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[  197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[  197.741493] FS:  0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[  197.749659] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[  197.762656] Call Trace:
[  197.765127]  <IRQ>
[  197.767162]  pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[  197.772364]  ? do_raw_spin_unlock+0x54/0x220
[  197.776680]  pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[  197.782406]  process_oq+0xe85/0x7890 [pm80xx]
[  197.786817]  ? lock_acquire+0x194/0x490
[  197.790697]  ? handle_irq_event+0x10e/0x1b0
[  197.794920]  ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[  197.800378]  ? __wake_up_bit+0x100/0x100
[  197.804340]  ? lock_is_held_type+0x98/0x110
[  197.808565]  pm80xx_chip_isr+0x94/0x130 [pm80xx]
[  197.813243]  tasklet_action_common.constprop.0+0x24b/0x2f0
[  197.818785]  __do_softirq+0x1b5/0x82d
[  197.822485]  ? do_raw_spin_unlock+0x54/0x220
[  197.826799]  __irq_exit_rcu+0x17e/0x1e0
[  197.830678]  irq_exit_rcu+0xa/0x20
[  197.834114]  common_interrupt+0x78/0x90
[  197.840051]  </IRQ>
[  197.844236]  <TASK>
[  197.848397]  asm_common_interrupt+0x1e/0x40

Avoid this issue by always initializing the ccb n_elem field to 0 in pm8001_send_abort_all(), pm8001_send_read_log() and pm80xx_send_abort_all().

---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 ++
 drivers/scsi/pm8001/pm80xx_hwi.c | 1 +
 2 files changed, 3 insertions(+)
drivers/scsi/pm8001/pm8001_hwi.c +2 -0
index 8095eb0b04f7..d853e8d0195a 100644
@@ -1788,6 +1788,7 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
 	ccb->device = pm8001_ha_dev;
 	ccb->ccb_tag = ccb_tag;
 	ccb->task = task;
+	ccb->n_elem = 0;
 
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 
@@ -1849,6 +1850,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
 	ccb->device = pm8001_ha_dev;
 	ccb->ccb_tag = ccb_tag;
 	ccb->task = task;
+	ccb->n_elem = 0;
 	pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
 	pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
 
drivers/scsi/pm8001/pm80xx_hwi.c +1 -0
index a5a1db6ed463..908dbac20b48 100644
@@ -1802,6 +1802,7 @@ static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
 	ccb->device = pm8001_ha_dev;
 	ccb->ccb_tag = ccb_tag;
 	ccb->task = task;
+	ccb->n_elem = 0;
 
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 
Signature · 1 line
2.34.1
author maintainer
#593 lore raw

PATCH 593/1126 mt76: do not always copy ethhdr in reverse_frag0_hdr_trans

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit eea7437e80216ac29a87b417896ce75656816b56 ]

Do not always copy ethernet header in mt{7615,7915,7921}_reverse_frag0_hdr_trans and use a pointer instead.

---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 19 +++++++++----------
 .../net/wireless/mediatek/mt76/mt7915/mac.c   | 19 +++++++++----------
 .../net/wireless/mediatek/mt76/mt7921/mac.c   | 19 +++++++++----------
 3 files changed, 27 insertions(+), 30 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7615/mac.c +9 -10
index 6d0ff5af8fec..21941e7873d8 100644
@@ -253,12 +253,12 @@ static void mt7615_mac_fill_tm_rx(struct mt7615_phy *phy, __le32 *rxv)
 static int mt7615_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 {
 	struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
+	struct ethhdr *eth_hdr = (struct ethhdr *)(skb->data + hdr_gap);
 	struct mt7615_sta *msta = (struct mt7615_sta *)status->wcid;
+	__le32 *rxd = (__le32 *)skb->data;
 	struct ieee80211_sta *sta;
 	struct ieee80211_vif *vif;
 	struct ieee80211_hdr hdr;
-	struct ethhdr eth_hdr;
-	__le32 *rxd = (__le32 *)skb->data;
 	__le32 qos_ctrl, ht_ctrl;
 
 	if (FIELD_GET(MT_RXD1_NORMAL_ADDR_TYPE, le32_to_cpu(rxd[1])) !=
@@ -275,7 +275,6 @@ static int mt7615_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
 
 	/* store the info from RXD and ethhdr to avoid being overridden */
-	memcpy(&eth_hdr, skb->data + hdr_gap, sizeof(eth_hdr));
 	hdr.frame_control = FIELD_GET(MT_RXD4_FRAME_CONTROL, rxd[4]);
 	hdr.seq_ctrl = FIELD_GET(MT_RXD6_SEQ_CTRL, rxd[6]);
 	qos_ctrl = FIELD_GET(MT_RXD6_QOS_CTL, rxd[6]);
@@ -290,24 +289,24 @@ static int mt7615_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 		ether_addr_copy(hdr.addr3, vif->bss_conf.bssid);
 		break;
 	case IEEE80211_FCTL_FROMDS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_source);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_source);
 		break;
 	case IEEE80211_FCTL_TODS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_dest);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_dest);
 		break;
 	case IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_dest);
-		ether_addr_copy(hdr.addr4, eth_hdr.h_source);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_dest);
+		ether_addr_copy(hdr.addr4, eth_hdr->h_source);
 		break;
 	default:
 		break;
 	}
 
 	skb_pull(skb, hdr_gap + sizeof(struct ethhdr) - 2);
-	if (eth_hdr.h_proto == htons(ETH_P_AARP) ||
-	    eth_hdr.h_proto == htons(ETH_P_IPX))
+	if (eth_hdr->h_proto == cpu_to_be16(ETH_P_AARP) ||
+	    eth_hdr->h_proto == cpu_to_be16(ETH_P_IPX))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), bridge_tunnel_header);
-	else if (eth_hdr.h_proto >= htons(ETH_P_802_3_MIN))
+	else if (eth_hdr->h_proto >= cpu_to_be16(ETH_P_802_3_MIN))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), rfc1042_header);
 	else
 		skb_pull(skb, 2);
drivers/net/wireless/mediatek/mt76/mt7915/mac.c +9 -10
index d18a2e93cff5..bca340cf8dcc 100644
@@ -391,12 +391,12 @@ mt7915_mac_decode_he_radiotap(struct sk_buff *skb, __le32 *rxv, u32 mode)
 static int mt7915_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 {
 	struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
+	struct ethhdr *eth_hdr = (struct ethhdr *)(skb->data + hdr_gap);
 	struct mt7915_sta *msta = (struct mt7915_sta *)status->wcid;
+	__le32 *rxd = (__le32 *)skb->data;
 	struct ieee80211_sta *sta;
 	struct ieee80211_vif *vif;
 	struct ieee80211_hdr hdr;
-	struct ethhdr eth_hdr;
-	__le32 *rxd = (__le32 *)skb->data;
 	__le32 qos_ctrl, ht_ctrl;
 
 	if (FIELD_GET(MT_RXD3_NORMAL_ADDR_TYPE, le32_to_cpu(rxd[3])) !=
@@ -413,7 +413,6 @@ static int mt7915_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
 
 	/* store the info from RXD and ethhdr to avoid being overridden */
-	memcpy(&eth_hdr, skb->data + hdr_gap, sizeof(eth_hdr));
 	hdr.frame_control = FIELD_GET(MT_RXD6_FRAME_CONTROL, rxd[6]);
 	hdr.seq_ctrl = FIELD_GET(MT_RXD8_SEQ_CTRL, rxd[8]);
 	qos_ctrl = FIELD_GET(MT_RXD8_QOS_CTL, rxd[8]);
@@ -428,24 +427,24 @@ static int mt7915_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 		ether_addr_copy(hdr.addr3, vif->bss_conf.bssid);
 		break;
 	case IEEE80211_FCTL_FROMDS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_source);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_source);
 		break;
 	case IEEE80211_FCTL_TODS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_dest);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_dest);
 		break;
 	case IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_dest);
-		ether_addr_copy(hdr.addr4, eth_hdr.h_source);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_dest);
+		ether_addr_copy(hdr.addr4, eth_hdr->h_source);
 		break;
 	default:
 		break;
 	}
 
 	skb_pull(skb, hdr_gap + sizeof(struct ethhdr) - 2);
-	if (eth_hdr.h_proto == htons(ETH_P_AARP) ||
-	    eth_hdr.h_proto == htons(ETH_P_IPX))
+	if (eth_hdr->h_proto == cpu_to_be16(ETH_P_AARP) ||
+	    eth_hdr->h_proto == cpu_to_be16(ETH_P_IPX))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), bridge_tunnel_header);
-	else if (eth_hdr.h_proto >= htons(ETH_P_802_3_MIN))
+	else if (eth_hdr->h_proto >= cpu_to_be16(ETH_P_802_3_MIN))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), rfc1042_header);
 	else
 		skb_pull(skb, 2);
drivers/net/wireless/mediatek/mt76/mt7921/mac.c +9 -10
index c6a849ee817c..2b6bbe0682c0 100644
@@ -402,12 +402,12 @@ mt7921_mac_assoc_rssi(struct mt7921_dev *dev, struct sk_buff *skb)
 static int mt7921_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 {
 	struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
+	struct ethhdr *eth_hdr = (struct ethhdr *)(skb->data + hdr_gap);
 	struct mt7921_sta *msta = (struct mt7921_sta *)status->wcid;
+	__le32 *rxd = (__le32 *)skb->data;
 	struct ieee80211_sta *sta;
 	struct ieee80211_vif *vif;
 	struct ieee80211_hdr hdr;
-	struct ethhdr eth_hdr;
-	__le32 *rxd = (__le32 *)skb->data;
 	__le32 qos_ctrl, ht_ctrl;
 
 	if (FIELD_GET(MT_RXD3_NORMAL_ADDR_TYPE, le32_to_cpu(rxd[3])) !=
@@ -424,7 +424,6 @@ static int mt7921_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
 
 	/* store the info from RXD and ethhdr to avoid being overridden */
-	memcpy(&eth_hdr, skb->data + hdr_gap, sizeof(eth_hdr));
 	hdr.frame_control = FIELD_GET(MT_RXD6_FRAME_CONTROL, rxd[6]);
 	hdr.seq_ctrl = FIELD_GET(MT_RXD8_SEQ_CTRL, rxd[8]);
 	qos_ctrl = FIELD_GET(MT_RXD8_QOS_CTL, rxd[8]);
@@ -439,24 +438,24 @@ static int mt7921_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 		ether_addr_copy(hdr.addr3, vif->bss_conf.bssid);
 		break;
 	case IEEE80211_FCTL_FROMDS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_source);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_source);
 		break;
 	case IEEE80211_FCTL_TODS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_dest);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_dest);
 		break;
 	case IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS:
-		ether_addr_copy(hdr.addr3, eth_hdr.h_dest);
-		ether_addr_copy(hdr.addr4, eth_hdr.h_source);
+		ether_addr_copy(hdr.addr3, eth_hdr->h_dest);
+		ether_addr_copy(hdr.addr4, eth_hdr->h_source);
 		break;
 	default:
 		break;
 	}
 
 	skb_pull(skb, hdr_gap + sizeof(struct ethhdr) - 2);
-	if (eth_hdr.h_proto == htons(ETH_P_AARP) ||
-	    eth_hdr.h_proto == htons(ETH_P_IPX))
+	if (eth_hdr->h_proto == cpu_to_be16(ETH_P_AARP) ||
+	    eth_hdr->h_proto == cpu_to_be16(ETH_P_IPX))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), bridge_tunnel_header);
-	else if (eth_hdr.h_proto >= htons(ETH_P_802_3_MIN))
+	else if (eth_hdr->h_proto >= cpu_to_be16(ETH_P_802_3_MIN))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), rfc1042_header);
 	else
 		skb_pull(skb, 2);
Signature · 1 line
2.34.1
author maintainer
#594 lore raw

PATCH 594/1126 mt76: fix endianness errors in reverse_frag0_hdr_trans

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit d0c0cefb87e283b5000121989f3c10c9915a2787 ]

Fix ht ctl field size in mt{7615,7915,7921}_reverse_frag0_hdr_trans. Fix the following endianness warnings in mt{7615,7915,7921}_reverse_frag0_hdr_trans:

drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:29: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: expected restricted __le16 [usertype] frame_control
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:417:27: got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:24: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: expected restricted __le16 [usertype] seq_ctrl
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:418:22: got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:20: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: expected restricted __le32 [usertype] qos_ctrl
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:419:18: got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: cast to restricted __le32 drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:19: warning: restricted __le32 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: expected restricted __le32 [usertype] ht_ctrl
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:420:17: got unsigned long
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:25: warning: restricted __be16 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:448:38: warning: restricted __be16 degrades to integer drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: warning: incorrect type in assignment (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: expected unsigned int [usertype] *cur_info
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1450:23: got restricted __le32 *
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:1451:34: warning: cast to restricted __le32

Fixes dc5399a50b45f ("mt76: reverse the first fragmented frame to 802.11")
---
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 31 ++++++++++++-------
 .../net/wireless/mediatek/mt76/mt7915/mac.c   | 30 +++++++++++-------
 .../net/wireless/mediatek/mt76/mt7921/mac.c   | 30 +++++++++++-------
 3 files changed, 55 insertions(+), 36 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7615/mac.c +19 -12
index 21941e7873d8..ba31bb7caaf9 100644
@@ -259,7 +259,7 @@ static int mt7615_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	struct ieee80211_sta *sta;
 	struct ieee80211_vif *vif;
 	struct ieee80211_hdr hdr;
-	__le32 qos_ctrl, ht_ctrl;
+	u16 frame_control;
 
 	if (FIELD_GET(MT_RXD1_NORMAL_ADDR_TYPE, le32_to_cpu(rxd[1])) !=
 	    MT_RXD1_NORMAL_U2M)
@@ -275,16 +275,15 @@ static int mt7615_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
 
 	/* store the info from RXD and ethhdr to avoid being overridden */
-	hdr.frame_control = FIELD_GET(MT_RXD4_FRAME_CONTROL, rxd[4]);
-	hdr.seq_ctrl = FIELD_GET(MT_RXD6_SEQ_CTRL, rxd[6]);
-	qos_ctrl = FIELD_GET(MT_RXD6_QOS_CTL, rxd[6]);
-	ht_ctrl = FIELD_GET(MT_RXD7_HT_CONTROL, rxd[7]);
-
+	frame_control = le32_get_bits(rxd[4], MT_RXD4_FRAME_CONTROL);
+	hdr.frame_control = cpu_to_le16(frame_control);
+	hdr.seq_ctrl = cpu_to_le16(le32_get_bits(rxd[6], MT_RXD6_SEQ_CTRL));
 	hdr.duration_id = 0;
+
 	ether_addr_copy(hdr.addr1, vif->addr);
 	ether_addr_copy(hdr.addr2, sta->addr);
-	switch (le16_to_cpu(hdr.frame_control) &
-		(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
+	switch (frame_control & (IEEE80211_FCTL_TODS |
+				 IEEE80211_FCTL_FROMDS)) {
 	case 0:
 		ether_addr_copy(hdr.addr3, vif->bss_conf.bssid);
 		break;
@@ -306,15 +305,23 @@ static int mt7615_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	if (eth_hdr->h_proto == cpu_to_be16(ETH_P_AARP) ||
 	    eth_hdr->h_proto == cpu_to_be16(ETH_P_IPX))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), bridge_tunnel_header);
-	else if (eth_hdr->h_proto >= cpu_to_be16(ETH_P_802_3_MIN))
+	else if (be16_to_cpu(eth_hdr->h_proto) >= ETH_P_802_3_MIN)
 		ether_addr_copy(skb_push(skb, ETH_ALEN), rfc1042_header);
 	else
 		skb_pull(skb, 2);
 
 	if (ieee80211_has_order(hdr.frame_control))
-		memcpy(skb_push(skb, 2), &ht_ctrl, 2);
-	if (ieee80211_is_data_qos(hdr.frame_control))
-		memcpy(skb_push(skb, 2), &qos_ctrl, 2);
+		memcpy(skb_push(skb, IEEE80211_HT_CTL_LEN), &rxd[7],
+		       IEEE80211_HT_CTL_LEN);
+
+	if (ieee80211_is_data_qos(hdr.frame_control)) {
+		__le16 qos_ctrl;
+
+		qos_ctrl = cpu_to_le16(le32_get_bits(rxd[6], MT_RXD6_QOS_CTL));
+		memcpy(skb_push(skb, IEEE80211_QOS_CTL_LEN), &qos_ctrl,
+		       IEEE80211_QOS_CTL_LEN);
+	}
+
 	if (ieee80211_has_a4(hdr.frame_control))
 		memcpy(skb_push(skb, sizeof(hdr)), &hdr, sizeof(hdr));
 	else
drivers/net/wireless/mediatek/mt76/mt7915/mac.c +18 -12
index bca340cf8dcc..12567b653607 100644
@@ -397,7 +397,7 @@ static int mt7915_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	struct ieee80211_sta *sta;
 	struct ieee80211_vif *vif;
 	struct ieee80211_hdr hdr;
-	__le32 qos_ctrl, ht_ctrl;
+	u16 frame_control;
 
 	if (FIELD_GET(MT_RXD3_NORMAL_ADDR_TYPE, le32_to_cpu(rxd[3])) !=
 	    MT_RXD3_NORMAL_U2M)
@@ -413,16 +413,15 @@ static int mt7915_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
 
 	/* store the info from RXD and ethhdr to avoid being overridden */
-	hdr.frame_control = FIELD_GET(MT_RXD6_FRAME_CONTROL, rxd[6]);
-	hdr.seq_ctrl = FIELD_GET(MT_RXD8_SEQ_CTRL, rxd[8]);
-	qos_ctrl = FIELD_GET(MT_RXD8_QOS_CTL, rxd[8]);
-	ht_ctrl = FIELD_GET(MT_RXD9_HT_CONTROL, rxd[9]);
-
+	frame_control = le32_get_bits(rxd[6], MT_RXD6_FRAME_CONTROL);
+	hdr.frame_control = cpu_to_le16(frame_control);
+	hdr.seq_ctrl = cpu_to_le16(le32_get_bits(rxd[8], MT_RXD8_SEQ_CTRL));
 	hdr.duration_id = 0;
+
 	ether_addr_copy(hdr.addr1, vif->addr);
 	ether_addr_copy(hdr.addr2, sta->addr);
-	switch (le16_to_cpu(hdr.frame_control) &
-		(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
+	switch (frame_control & (IEEE80211_FCTL_TODS |
+				 IEEE80211_FCTL_FROMDS)) {
 	case 0:
 		ether_addr_copy(hdr.addr3, vif->bss_conf.bssid);
 		break;
@@ -444,15 +443,22 @@ static int mt7915_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	if (eth_hdr->h_proto == cpu_to_be16(ETH_P_AARP) ||
 	    eth_hdr->h_proto == cpu_to_be16(ETH_P_IPX))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), bridge_tunnel_header);
-	else if (eth_hdr->h_proto >= cpu_to_be16(ETH_P_802_3_MIN))
+	else if (be16_to_cpu(eth_hdr->h_proto) >= ETH_P_802_3_MIN)
 		ether_addr_copy(skb_push(skb, ETH_ALEN), rfc1042_header);
 	else
 		skb_pull(skb, 2);
 
 	if (ieee80211_has_order(hdr.frame_control))
-		memcpy(skb_push(skb, 2), &ht_ctrl, 2);
-	if (ieee80211_is_data_qos(hdr.frame_control))
-		memcpy(skb_push(skb, 2), &qos_ctrl, 2);
+		memcpy(skb_push(skb, IEEE80211_HT_CTL_LEN), &rxd[9],
+		       IEEE80211_HT_CTL_LEN);
+	if (ieee80211_is_data_qos(hdr.frame_control)) {
+		__le16 qos_ctrl;
+
+		qos_ctrl = cpu_to_le16(le32_get_bits(rxd[8], MT_RXD8_QOS_CTL));
+		memcpy(skb_push(skb, IEEE80211_QOS_CTL_LEN), &qos_ctrl,
+		       IEEE80211_QOS_CTL_LEN);
+	}
+
 	if (ieee80211_has_a4(hdr.frame_control))
 		memcpy(skb_push(skb, sizeof(hdr)), &hdr, sizeof(hdr));
 	else
drivers/net/wireless/mediatek/mt76/mt7921/mac.c +18 -12
index 2b6bbe0682c0..f8d95d64fe46 100644
@@ -408,7 +408,7 @@ static int mt7921_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	struct ieee80211_sta *sta;
 	struct ieee80211_vif *vif;
 	struct ieee80211_hdr hdr;
-	__le32 qos_ctrl, ht_ctrl;
+	u16 frame_control;
 
 	if (FIELD_GET(MT_RXD3_NORMAL_ADDR_TYPE, le32_to_cpu(rxd[3])) !=
 	    MT_RXD3_NORMAL_U2M)
@@ -424,16 +424,15 @@ static int mt7921_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
 
 	/* store the info from RXD and ethhdr to avoid being overridden */
-	hdr.frame_control = FIELD_GET(MT_RXD6_FRAME_CONTROL, rxd[6]);
-	hdr.seq_ctrl = FIELD_GET(MT_RXD8_SEQ_CTRL, rxd[8]);
-	qos_ctrl = FIELD_GET(MT_RXD8_QOS_CTL, rxd[8]);
-	ht_ctrl = FIELD_GET(MT_RXD9_HT_CONTROL, rxd[9]);
-
+	frame_control = le32_get_bits(rxd[6], MT_RXD6_FRAME_CONTROL);
+	hdr.frame_control = cpu_to_le16(frame_control);
+	hdr.seq_ctrl = cpu_to_le16(le32_get_bits(rxd[8], MT_RXD8_SEQ_CTRL));
 	hdr.duration_id = 0;
+
 	ether_addr_copy(hdr.addr1, vif->addr);
 	ether_addr_copy(hdr.addr2, sta->addr);
-	switch (le16_to_cpu(hdr.frame_control) &
-		(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
+	switch (frame_control & (IEEE80211_FCTL_TODS |
+				 IEEE80211_FCTL_FROMDS)) {
 	case 0:
 		ether_addr_copy(hdr.addr3, vif->bss_conf.bssid);
 		break;
@@ -455,15 +454,22 @@ static int mt7921_reverse_frag0_hdr_trans(struct sk_buff *skb, u16 hdr_gap)
 	if (eth_hdr->h_proto == cpu_to_be16(ETH_P_AARP) ||
 	    eth_hdr->h_proto == cpu_to_be16(ETH_P_IPX))
 		ether_addr_copy(skb_push(skb, ETH_ALEN), bridge_tunnel_header);
-	else if (eth_hdr->h_proto >= cpu_to_be16(ETH_P_802_3_MIN))
+	else if (be16_to_cpu(eth_hdr->h_proto) >= ETH_P_802_3_MIN)
 		ether_addr_copy(skb_push(skb, ETH_ALEN), rfc1042_header);
 	else
 		skb_pull(skb, 2);
 
 	if (ieee80211_has_order(hdr.frame_control))
-		memcpy(skb_push(skb, 2), &ht_ctrl, 2);
-	if (ieee80211_is_data_qos(hdr.frame_control))
-		memcpy(skb_push(skb, 2), &qos_ctrl, 2);
+		memcpy(skb_push(skb, IEEE80211_HT_CTL_LEN), &rxd[9],
+		       IEEE80211_HT_CTL_LEN);
+	if (ieee80211_is_data_qos(hdr.frame_control)) {
+		__le16 qos_ctrl;
+
+		qos_ctrl = cpu_to_le16(le32_get_bits(rxd[8], MT_RXD8_QOS_CTL));
+		memcpy(skb_push(skb, IEEE80211_QOS_CTL_LEN), &qos_ctrl,
+		       IEEE80211_QOS_CTL_LEN);
+	}
+
 	if (ieee80211_has_a4(hdr.frame_control))
 		memcpy(skb_push(skb, sizeof(hdr)), &hdr, sizeof(hdr));
 	else
Signature · 1 line
2.34.1
author maintainer
#595 lore raw

PATCH 595/1126 mt76: mt7921s: fix missing fc type/sub-type for 802.11 pkts

In reply to Greg Kroah-Hartman

From: Deren Wu <[email protected]>

[ Upstream commit 355c060d5f38a784822d544e969121a273bcf545 ]

For non-mmio devices, should set fc values to proper txwi config

Fixes 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
---
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 12 +++++++++---
 drivers/net/wireless/mediatek/mt76/mt7921/mac.h |  3 +++
 2 files changed, 12 insertions(+), 3 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7921/mac.c +9 -3
index f8d95d64fe46..84f72dd1bf93 100644
@@ -919,9 +919,15 @@ mt7921_mac_write_txwi_80211(struct mt7921_dev *dev, __le32 *txwi,
 		txwi[3] |= cpu_to_le32(val);
 	}
 
-	val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
-	      FIELD_PREP(MT_TXD7_SUB_TYPE, fc_stype);
-	txwi[7] |= cpu_to_le32(val);
+	if (mt76_is_mmio(&dev->mt76)) {
+		val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
+		      FIELD_PREP(MT_TXD7_SUB_TYPE, fc_stype);
+		txwi[7] |= cpu_to_le32(val);
+	} else {
+		val = FIELD_PREP(MT_TXD8_L_TYPE, fc_type) |
+		      FIELD_PREP(MT_TXD8_L_SUB_TYPE, fc_stype);
+		txwi[8] |= cpu_to_le32(val);
+	}
 }
 
 void mt7921_mac_write_txwi(struct mt7921_dev *dev, __le32 *txwi,
drivers/net/wireless/mediatek/mt76/mt7921/mac.h +3 -0
index 544a1c33126a..12e1cf8abe6e 100644
@@ -284,6 +284,9 @@ enum tx_mcu_port_q_idx {
 #define MT_TXD7_HW_AMSDU		BIT(10)
 #define MT_TXD7_TX_TIME			GENMASK(9, 0)
 
+#define MT_TXD8_L_TYPE			GENMASK(5, 4)
+#define MT_TXD8_L_SUB_TYPE		GENMASK(3, 0)
+
 #define MT_TX_RATE_STBC			BIT(13)
 #define MT_TX_RATE_NSS			GENMASK(12, 10)
 #define MT_TX_RATE_MODE			GENMASK(9, 6)
Signature · 1 line
2.34.1
author maintainer
#596 lore raw

PATCH 596/1126 net: dsa: realtek-smi: fix kdoc warnings

In reply to Greg Kroah-Hartman

From: Luiz Angelo Daros de Luca <[email protected]>

[ Upstream commit 0f0c6da03ba37739901ca5db4361c1ef1ae9463f ]

Removed kdoc mark for incomplete struct description. Added a return description for rtl8366rb_drop_untagged.

---
 drivers/net/dsa/realtek-smi-core.h | 4 ++--
 drivers/net/dsa/rtl8366rb.c        | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/net/dsa/realtek-smi-core.h +2 -2
index 5bfa53e2480a..faed387d8db3 100644
@@ -25,7 +25,7 @@ struct rtl8366_mib_counter {
 	const char	*name;
 };
 
-/**
+/*
  * struct rtl8366_vlan_mc - Virtual LAN member configuration
  */
 struct rtl8366_vlan_mc {
@@ -74,7 +74,7 @@ struct realtek_smi {
 	void			*chip_data; /* Per-chip extra variant data */
 };
 
-/**
+/*
  * struct realtek_smi_ops - vtable for the per-SMI-chiptype operations
  * @detect: detects the chiptype
  */
drivers/net/dsa/rtl8366rb.c +2 -0
index ecc19bd5115f..4f8c06d7ab3a 100644
@@ -1252,6 +1252,8 @@ rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
  * @smi: SMI state container
  * @port: the port to drop untagged and C-tagged frames on
  * @drop: whether to drop or pass untagged and C-tagged frames
+ *
+ * Return: zero for success, a negative number on error.
  */
 static int rtl8366rb_drop_untagged(struct realtek_smi *smi, int port, bool drop)
 {
Signature · 1 line
2.34.1
author maintainer
#597 lore raw

PATCH 597/1126 net: dsa: realtek-smi: move to subdirectory

In reply to Greg Kroah-Hartman

From: Luiz Angelo Daros de Luca <[email protected]>

[ Upstream commit 319a70a5fea9590e9431dd57f56191996c4787f4 ]

---
 MAINTAINERS                                   |  3 +--
 drivers/net/dsa/Kconfig                       | 12 +----------
 drivers/net/dsa/Makefile                      |  3 +--
 drivers/net/dsa/realtek/Kconfig               | 20 +++++++++++++++++++
 drivers/net/dsa/realtek/Makefile              |  3 +++
 .../net/dsa/{ => realtek}/realtek-smi-core.c  |  0
 .../net/dsa/{ => realtek}/realtek-smi-core.h  |  0
 drivers/net/dsa/{ => realtek}/rtl8365mb.c     |  0
 drivers/net/dsa/{ => realtek}/rtl8366.c       |  0
 drivers/net/dsa/{ => realtek}/rtl8366rb.c     |  0
 10 files changed, 26 insertions(+), 15 deletions(-)
 create mode 100644 drivers/net/dsa/realtek/Kconfig
 create mode 100644 drivers/net/dsa/realtek/Makefile
 rename drivers/net/dsa/{ => realtek}/realtek-smi-core.c (100%)
 rename drivers/net/dsa/{ => realtek}/realtek-smi-core.h (100%)
 rename drivers/net/dsa/{ => realtek}/rtl8365mb.c (100%)
 rename drivers/net/dsa/{ => realtek}/rtl8366.c (100%)
 rename drivers/net/dsa/{ => realtek}/rtl8366rb.c (100%)
MAINTAINERS +1 -2
index cd0f68d4a34a..d9b2f1731ee0 100644
@@ -16373,8 +16373,7 @@ M:	Linus Walleij <[email protected]>
 M:	Alvin Šipraga <[email protected]>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
-F:	drivers/net/dsa/realtek-smi*
-F:	drivers/net/dsa/rtl83*
+F:	drivers/net/dsa/realtek/*
 
 REALTEK WIRELESS DRIVER (rtlwifi family)
 M:	Ping-Ke Shih <[email protected]>
drivers/net/dsa/Kconfig +1 -11
index 0029d279616f..37a3dabdce31 100644
@@ -68,17 +68,7 @@ config NET_DSA_QCA8K
 	  This enables support for the Qualcomm Atheros QCA8K Ethernet
 	  switch chips.
 
-config NET_DSA_REALTEK_SMI
-	tristate "Realtek SMI Ethernet switch family support"
-	select NET_DSA_TAG_RTL4_A
-	select NET_DSA_TAG_RTL8_4
-	select FIXED_PHY
-	select IRQ_DOMAIN
-	select REALTEK_PHY
-	select REGMAP
-	help
-	  This enables support for the Realtek SMI-based switch
-	  chips, currently only RTL8366RB.
+source "drivers/net/dsa/realtek/Kconfig"
 
 config NET_DSA_SMSC_LAN9303
 	tristate
drivers/net/dsa/Makefile +1 -2
index 8da1569a34e6..e73838c12256 100644
@@ -9,8 +9,6 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
-obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
-realtek-smi-objs		:= realtek-smi-core.o rtl8366.o rtl8366rb.o rtl8365mb.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
@@ -23,5 +21,6 @@ obj-y				+= microchip/
 obj-y				+= mv88e6xxx/
 obj-y				+= ocelot/
 obj-y				+= qca/
+obj-y				+= realtek/
 obj-y				+= sja1105/
 obj-y				+= xrs700x/
drivers/net/dsa/realtek/Kconfig new file +20 -0
new file mode 100644
index 000000000000..1c62212fb0ec
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig NET_DSA_REALTEK
+	tristate "Realtek Ethernet switch family support"
+	depends on NET_DSA
+	select NET_DSA_TAG_RTL4_A
+	select NET_DSA_TAG_RTL8_4
+	select FIXED_PHY
+	select IRQ_DOMAIN
+	select REALTEK_PHY
+	select REGMAP
+	help
+	  Select to enable support for Realtek Ethernet switch chips.
+
+config NET_DSA_REALTEK_SMI
+	tristate "Realtek SMI connected switch driver"
+	depends on NET_DSA_REALTEK
+	default y
+	help
+	  Select to enable support for registering switches connected
+	  through SMI.
drivers/net/dsa/realtek/Makefile new file +3 -0
new file mode 100644
index 000000000000..323b921bfce0
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) 	+= realtek-smi.o
+realtek-smi-objs			:= realtek-smi-core.o rtl8366.o rtl8366rb.o rtl8365mb.o
drivers/net/dsa/realtek/realtek-smi-core.c renamed from drivers/net/dsa/realtek-smi-core.c +0 -0
similarity index 100%
rename from drivers/net/dsa/realtek-smi-core.c
rename to drivers/net/dsa/realtek/realtek-smi-core.c
drivers/net/dsa/realtek/realtek-smi-core.h renamed from drivers/net/dsa/realtek-smi-core.h +0 -0
similarity index 100%
rename from drivers/net/dsa/realtek-smi-core.h
rename to drivers/net/dsa/realtek/realtek-smi-core.h
drivers/net/dsa/realtek/rtl8365mb.c renamed from drivers/net/dsa/rtl8365mb.c +0 -0
similarity index 100%
rename from drivers/net/dsa/rtl8365mb.c
rename to drivers/net/dsa/realtek/rtl8365mb.c
drivers/net/dsa/realtek/rtl8366.c renamed from drivers/net/dsa/rtl8366.c +0 -0
similarity index 100%
rename from drivers/net/dsa/rtl8366.c
rename to drivers/net/dsa/realtek/rtl8366.c
drivers/net/dsa/realtek/rtl8366rb.c renamed from drivers/net/dsa/rtl8366rb.c +0 -0
similarity index 100%
rename from drivers/net/dsa/rtl8366rb.c
rename to drivers/net/dsa/realtek/rtl8366rb.c
Signature · 1 line
2.34.1
author maintainer
#598 lore raw

PATCH 598/1126 RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR

In reply to Greg Kroah-Hartman

From: Aharon Landau <[email protected]>

[ Upstream commit 2f0e60d5e9f96341a0c8a01be8878cdb3b29ff20 ]

When an ODP MR cache entry is empty and trying to allocate it, increment the ent->miss counter and call to queue_adjust_cache_locked() to verify the entry is balanced.

---
 drivers/infiniband/hw/mlx5/mr.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/hw/mlx5/mr.c +2 -0
index 157d862fb864..2910d7833313 100644
@@ -585,6 +585,8 @@ struct mlx5_ib_mr *mlx5_mr_cache_alloc(struct mlx5_ib_dev *dev,
 	ent = &cache->ent[entry];
 	spin_lock_irq(&ent->lock);
 	if (list_empty(&ent->head)) {
+		queue_adjust_cache_locked(ent);
+		ent->miss++;
 		spin_unlock_irq(&ent->lock);
 		mr = create_cache_mr(ent);
 		if (IS_ERR(mr))
Signature · 1 line
2.34.1
author maintainer
#599 lore raw

PATCH 599/1126 drm/amd/display: Remove vupdate_int_entry definition

In reply to Greg Kroah-Hartman

From: Maíra Canal <[email protected]>

[ Upstream commit 3679b8518cd213c25d555553ef212e233faf698c ]

Remove the vupdate_int_entry definition and utilization to avoid the following warning by Clang:

drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:410:2:
warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]

    vupdate_no_lock_int_entry(0),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:404:2:
note: previous initialization is here
    vupdate_int_entry(0),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:411:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(1),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:405:2:
note: previous initialization is here
    vupdate_int_entry(1),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:412:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(2),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:406:2:
note: previous initialization is here
    vupdate_int_entry(2),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:413:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(3),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:407:2:
note: previous initialization is here
    vupdate_int_entry(3),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:414:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(4),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:408:2:
note: previous initialization is here
    vupdate_int_entry(4),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:415:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(5),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:409:2:
note: previous initialization is here
    vupdate_int_entry(5),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
        [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
        ^~

6 warnings generated.

Fixes 688f97ed3f5e ("drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1")
---
 .../amd/display/dc/irq/dcn21/irq_service_dcn21.c   | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c +0 -14
index 0f15bcada4e9..717977aec6d0 100644
@@ -265,14 +265,6 @@ static const struct irq_source_info_funcs vline0_irq_info_funcs = {
 		.funcs = &pflip_irq_info_funcs\
 	}
 
-#define vupdate_int_entry(reg_num)\
-	[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
-		IRQ_REG_ENTRY(OTG, reg_num,\
-			OTG_GLOBAL_SYNC_STATUS, VUPDATE_INT_EN,\
-			OTG_GLOBAL_SYNC_STATUS, VUPDATE_EVENT_CLEAR),\
-		.funcs = &vblank_irq_info_funcs\
-	}
-
 /* vupdate_no_lock_int_entry maps to DC_IRQ_SOURCE_VUPDATEx, to match semantic
  * of DCE's DC_IRQ_SOURCE_VUPDATEx.
  */
@@ -401,12 +393,6 @@ irq_source_info_dcn21[DAL_IRQ_SOURCES_NUMBER] = {
 	dc_underflow_int_entry(6),
 	[DC_IRQ_SOURCE_DMCU_SCP] = dummy_irq_entry(),
 	[DC_IRQ_SOURCE_VBIOS_SW] = dummy_irq_entry(),
-	vupdate_int_entry(0),
-	vupdate_int_entry(1),
-	vupdate_int_entry(2),
-	vupdate_int_entry(3),
-	vupdate_int_entry(4),
-	vupdate_int_entry(5),
 	vupdate_no_lock_int_entry(0),
 	vupdate_no_lock_int_entry(1),
 	vupdate_no_lock_int_entry(2),
Signature · 1 line
2.34.1
author maintainer
#600 lore raw

PATCH 600/1126 TOMOYO: fix __setup handlers return values

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 39844b7e3084baecef52d1498b5fa81afa2cefa9 ]

__setup() handlers should return 1 if the parameter is handled. Returning 0 causes the entire string to be added to init's environment strings (limited to 32 strings), unnecessarily polluting it.

Using the documented strings "TOMOYO_loader=string1" and "TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.

and these strings are added to init's environment string space:
Run /sbin/init as init process

    with arguments:
     /sbin/init
    with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     TOMOYO_loader=string1
     TOMOYO_trigger=string2

With this change, these __setup handlers act as expected, and init's environment is not polluted with these strings.

Fixes 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.")
Cc James Morris <[email protected]>
Cc Kentaro Takeda <[email protected]>
Cc "Serge E. Hallyn" <[email protected]>
---
 security/tomoyo/load_policy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
security/tomoyo/load_policy.c +2 -2
index 3445ae6fd479..363b65be87ab 100644
@@ -24,7 +24,7 @@ static const char *tomoyo_loader;
 static int __init tomoyo_loader_setup(char *str)
 {
 	tomoyo_loader = str;
-	return 0;
+	return 1;
 }
 
 __setup("TOMOYO_loader=", tomoyo_loader_setup);
@@ -64,7 +64,7 @@ static const char *tomoyo_trigger;
 static int __init tomoyo_trigger_setup(char *str)
 {
 	tomoyo_trigger = str;
-	return 0;
+	return 1;
 }
 
 __setup("TOMOYO_trigger=", tomoyo_trigger_setup);
Signature · 1 line
2.34.1
author maintainer
#601 lore raw

PATCH 601/1126 power: supply: sbs-charger: Dont cancel work that is not initialized

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit de85193cff0d94d030a53656d8fcc41794807bef ]

This driver can use an interrupt or polling in order get the charger's status.

When using polling, a delayed work is used.

However, the remove() function unconditionally call cancel_delayed_work_sync(), even if the delayed work is not used and is not initialized.

In order to fix it, use devm_delayed_work_autocancel() and remove the now useless remove() function.

Fixes feb583e37f8a ("power: supply: add sbs-charger driver")
---
 drivers/power/supply/sbs-charger.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)
drivers/power/supply/sbs-charger.c +7 -11
index 6fa65d118ec1..b08f7d0c4181 100644
@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/regmap.h>
 #include <linux/bitops.h>
+#include <linux/devm-helpers.h>
 
 #define SBS_CHARGER_REG_SPEC_INFO		0x11
 #define SBS_CHARGER_REG_STATUS			0x13
@@ -209,7 +210,12 @@ static int sbs_probe(struct i2c_client *client,
 		if (ret)
 			return dev_err_probe(&client->dev, ret, "Failed to request irq\n");
 	} else {
-		INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+		ret = devm_delayed_work_autocancel(&client->dev, &chip->work,
+						   sbs_delayed_work);
+		if (ret)
+			return dev_err_probe(&client->dev, ret,
+					     "Failed to init work for polling\n");
+
 		schedule_delayed_work(&chip->work,
 				      msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
 	}
@@ -220,15 +226,6 @@ static int sbs_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int sbs_remove(struct i2c_client *client)
-{
-	struct sbs_info *chip = i2c_get_clientdata(client);
-
-	cancel_delayed_work_sync(&chip->work);
-
-	return 0;
-}
-
 #ifdef CONFIG_OF
 static const struct of_device_id sbs_dt_ids[] = {
 	{ .compatible = "sbs,sbs-charger" },
@@ -245,7 +242,6 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
 
 static struct i2c_driver sbs_driver = {
 	.probe		= sbs_probe,
-	.remove		= sbs_remove,
 	.id_table	= sbs_id,
 	.driver = {
 		.name	= "sbs-charger",
Signature · 1 line
2.34.1
author maintainer
#602 lore raw

PATCH 602/1126 mt76: mt7915: enlarge wcid size to 544

In reply to Greg Kroah-Hartman

From: Bo Jiao <[email protected]>

[ Upstream commit b37d0c9735bc1976f85636e06e07f1a7547d969d ]

The mt7916 can support up to 544 wcid entries. This is an intermediate patch to add mt7916 support.

---
 drivers/net/wireless/mediatek/mt76/mt76.h          | 2 +-
 drivers/net/wireless/mediatek/mt76/mt7915/init.c   | 2 +-
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c    | 2 +-
 drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h | 8 +++++++-
 4 files changed, 10 insertions(+), 4 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76.h +1 -1
index 404c3d1a70d6..1f6f7a44d3f0 100644
@@ -224,7 +224,7 @@ enum mt76_wcid_flags {
 	MT_WCID_FLAG_HDR_TRANS,
 };
 
-#define MT76_N_WCIDS 288
+#define MT76_N_WCIDS 544
 
 /* stored in ieee80211_tx_info::hw_queue */
 #define MT_TX_HW_QUEUE_EXT_PHY		BIT(3)
drivers/net/wireless/mediatek/mt76/mt7915/init.c +1 -1
index d054cdecd5f7..29517ca08de0 100644
@@ -399,7 +399,7 @@ static void mt7915_mac_init(struct mt7915_dev *dev)
 	/* enable hardware de-agg */
 	mt76_set(dev, MT_MDP_DCR0, MT_MDP_DCR0_DAMSDU_EN);
 
-	for (i = 0; i < MT7915_WTBL_SIZE; i++)
+	for (i = 0; i < mt7915_wtbl_size(dev); i++)
 		mt7915_mac_wtbl_update(dev, i,
 				       MT_WTBL_UPDATE_ADM_COUNT_CLEAR);
 	for (i = 0; i < 2; i++)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c +1 -1
index 12567b653607..db267642924d 100644
@@ -1598,7 +1598,7 @@ static void mt7915_mac_add_txs(struct mt7915_dev *dev, void *data)
 	if (pid < MT_PACKET_ID_FIRST)
 		return;
 
-	if (wcidx >= MT7915_WTBL_SIZE)
+	if (wcidx >= mt7915_wtbl_size(dev))
 		return;
 
 	rcu_read_lock();
drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h +7 -1
index 42d887383e8d..12ca54566461 100644
@@ -12,7 +12,8 @@
 #define MT7915_MAX_INTERFACES		19
 #define MT7915_MAX_WMM_SETS		4
 #define MT7915_WTBL_SIZE		288
-#define MT7915_WTBL_RESERVED		(MT7915_WTBL_SIZE - 1)
+#define MT7916_WTBL_SIZE		544
+#define MT7915_WTBL_RESERVED		(mt7915_wtbl_size(dev) - 1)
 #define MT7915_WTBL_STA			(MT7915_WTBL_RESERVED - \
 					 MT7915_MAX_INTERFACES)
 
@@ -449,6 +450,11 @@ static inline bool is_mt7915(struct mt76_dev *dev)
 	return mt76_chip(dev) == 0x7915;
 }
 
+static inline u16 mt7915_wtbl_size(struct mt7915_dev *dev)
+{
+	return is_mt7915(&dev->mt76) ? MT7915_WTBL_SIZE : MT7916_WTBL_SIZE;
+}
+
 void mt7915_dual_hif_set_irq_mask(struct mt7915_dev *dev, bool write_reg,
 				  u32 clear, u32 set);
 
Signature · 1 line
2.34.1
author maintainer
#603 lore raw

PATCH 603/1126 mt76: mt7915: fix the muru tlv issue

In reply to Greg Kroah-Hartman

From: MeiChia Chiu <[email protected]>

[ Upstream commit d98a72725bc96c98f68eac12e5a91ec349322c88 ]

The muru enable/disable are only set after the first station connection. Without this patch, the firmware couldn't enable muru
if the first connected station is non-HE type.

Fixes 16bff457dd33a ("mt76: mt7915: rework mt7915_mcu_sta_muru_tlv()")
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c +5 -7
index 8ff2402c4817..31634d7ed173 100644
@@ -1516,9 +1516,6 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 	    vif->type != NL80211_IFTYPE_AP)
 		return;
 
-	if (!sta->vht_cap.vht_supported)
-		return;
-
 	tlv = mt7915_mcu_add_tlv(skb, STA_REC_MURU, sizeof(*muru));
 
 	muru = (struct sta_rec_muru *)tlv;
@@ -1526,9 +1523,12 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 	muru->cfg.mimo_dl_en = mvif->cap.he_mu_ebfer ||
 			       mvif->cap.vht_mu_ebfer ||
 			       mvif->cap.vht_mu_ebfee;
+	muru->cfg.mimo_ul_en = true;
+	muru->cfg.ofdma_dl_en = true;
 
-	muru->mimo_dl.vht_mu_bfee =
-		!!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
+	if (sta->vht_cap.vht_supported)
+		muru->mimo_dl.vht_mu_bfee =
+			!!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
 
 	if (!sta->he_cap.has_he)
 		return;
@@ -1536,13 +1536,11 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 	muru->mimo_dl.partial_bw_dl_mimo =
 		HE_PHY(CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO, elem->phy_cap_info[6]);
 
-	muru->cfg.mimo_ul_en = true;
 	muru->mimo_ul.full_ul_mimo =
 		HE_PHY(CAP2_UL_MU_FULL_MU_MIMO, elem->phy_cap_info[2]);
 	muru->mimo_ul.partial_ul_mimo =
 		HE_PHY(CAP2_UL_MU_PARTIAL_MU_MIMO, elem->phy_cap_info[2]);
 
-	muru->cfg.ofdma_dl_en = true;
 	muru->ofdma_dl.punc_pream_rx =
 		HE_PHY(CAP1_PREAMBLE_PUNC_RX_MASK, elem->phy_cap_info[1]);
 	muru->ofdma_dl.he_20m_in_40m_2g =
Signature · 1 line
2.34.1
author maintainer
#604 lore raw

PATCH 604/1126 drm/dp: Fix OOB read when handling Post Cursor2 register

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

[ Upstream commit a2151490cc6c57b368d7974ffd447a8b36ade639 ]

The link_status array was not large enough to read the Adjust Request Post Cursor2 register, so remove the common helper function to avoid an OOB read, found with a -Warray-bounds build:

drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor':
drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds]

   59 |         return link_status[r - DP_LANE0_1_STATUS];
      |                ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status'
  147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE],
      |                                          ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Replace the only user of the helper with an open-coded fetch and decode, similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c.

Cc Daniel Vetter <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc Thomas Zimmermann <[email protected]>
Cc David Airlie <[email protected]>
Fixes 79465e0ffeb9 ("drm/dp: Add helper to get post-cursor adjustments")
---
 drivers/gpu/drm/drm_dp_helper.c | 10 ----------
 drivers/gpu/drm/tegra/dp.c      | 11 ++++++++++-
 include/drm/drm_dp_helper.h     |  2 --
 3 files changed, 10 insertions(+), 13 deletions(-)
drivers/gpu/drm/drm_dp_helper.c +0 -10
index 23f9073bc473..c9528aa62c9c 100644
@@ -144,16 +144,6 @@ u8 drm_dp_get_adjust_tx_ffe_preset(const u8 link_status[DP_LINK_STATUS_SIZE],
 }
 EXPORT_SYMBOL(drm_dp_get_adjust_tx_ffe_preset);
 
-u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE],
-					 unsigned int lane)
-{
-	unsigned int offset = DP_ADJUST_REQUEST_POST_CURSOR2;
-	u8 value = dp_link_status(link_status, offset);
-
-	return (value >> (lane << 1)) & 0x3;
-}
-EXPORT_SYMBOL(drm_dp_get_adjust_request_post_cursor);
-
 static int __8b10b_clock_recovery_delay_us(const struct drm_dp_aux *aux, u8 rd_interval)
 {
 	if (rd_interval > 4)
drivers/gpu/drm/tegra/dp.c +10 -1
index 70dfb7d1dec5..f5535eb04c6b 100644
@@ -549,6 +549,15 @@ static void drm_dp_link_get_adjustments(struct drm_dp_link *link,
 {
 	struct drm_dp_link_train_set *adjust = &link->train.adjust;
 	unsigned int i;
+	u8 post_cursor;
+	int err;
+
+	err = drm_dp_dpcd_read(link->aux, DP_ADJUST_REQUEST_POST_CURSOR2,
+			       &post_cursor, sizeof(post_cursor));
+	if (err < 0) {
+		DRM_ERROR("failed to read post_cursor2: %d\n", err);
+		post_cursor = 0;
+	}
 
 	for (i = 0; i < link->lanes; i++) {
 		adjust->voltage_swing[i] =
@@ -560,7 +569,7 @@ static void drm_dp_link_get_adjustments(struct drm_dp_link *link,
 				DP_TRAIN_PRE_EMPHASIS_SHIFT;
 
 		adjust->post_cursor[i] =
-			drm_dp_get_adjust_request_post_cursor(status, i);
+			(post_cursor >> (i << 1)) & 0x3;
 	}
 }
 
include/drm/drm_dp_helper.h +0 -2
index 30359e434c3f..28378db676c8 100644
@@ -1528,8 +1528,6 @@ u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SI
 					  int lane);
 u8 drm_dp_get_adjust_tx_ffe_preset(const u8 link_status[DP_LINK_STATUS_SIZE],
 				   int lane);
-u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE],
-					 unsigned int lane);
 
 #define DP_BRANCH_OUI_HEADER_SIZE	0xc
 #define DP_RECEIVER_CAP_SIZE		0xf
Signature · 1 line
2.34.1
author maintainer
#605 lore raw

PATCH 605/1126 ext2: correct max file size computing

In reply to Greg Kroah-Hartman

From: Zhang Yi <[email protected]>

[ Upstream commit 50b3a818991074177a56c87124c7a7bdf5fa4f67 ]

We need to calculate the max file size accurately if the total blocks that can address by block tree exceed the upper_limit. But this check is not correct now, it only compute the total data blocks but missing metadata blocks are needed. So in the case of "data blocks < upper_limit && total blocks > upper_limit", we will get wrong result. Fortunately, this case could not happen in reality, but it's confused and better to correct the computing.

bits data blocks metadatablocks upper_limit
10 16843020 66051 2147483647
11 134480396 263171 1073741823

  12      1074791436          1050627     536870911 (*)
  13      8594130956          4198403     268435455 (*)
  14     68736258060         16785411     134217727 (*)

15 549822930956 67125251 67108863 (*)
16 4398314962956 268468227 33554431 (*)

[*] Need to calculate in depth.

Fixes 1c2d14212b15 ("ext2: Fix underflow in ext2_max_size()")
---
 fs/ext2/super.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/ext2/super.c +5 -1
index 94f1fbd7d3ac..6d4f5ef74766 100644
@@ -753,8 +753,12 @@ static loff_t ext2_max_size(int bits)
 	res += 1LL << (bits-2);
 	res += 1LL << (2*(bits-2));
 	res += 1LL << (3*(bits-2));
+	/* Compute how many metadata blocks are needed */
+	meta_blocks = 1;
+	meta_blocks += 1 + ppb;
+	meta_blocks += 1 + ppb + ppb * ppb;
 	/* Does block tree limit file size? */
-	if (res < upper_limit)
+	if (res + meta_blocks <= upper_limit)
 		goto check_lfs;
 
 	res = upper_limit;
Signature · 1 line
2.34.1
author maintainer
#606 lore raw

PATCH 606/1126 drm/tegra: Fix reference leak in tegra_dsi_ganged_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 221e3638feb8bc42143833c9a704fa89b6c366bb ]

The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add put_device() call to fix this.

Fixes e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
---
 drivers/gpu/drm/tegra/dsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/tegra/dsi.c +3 -1
index f46d377f0c30..de1333dc0d86 100644
@@ -1538,8 +1538,10 @@ static int tegra_dsi_ganged_probe(struct tegra_dsi *dsi)
 		dsi->slave = platform_get_drvdata(gangster);
 		of_node_put(np);
 
-		if (!dsi->slave)
+		if (!dsi->slave) {
+			put_device(&gangster->dev);
 			return -EPROBE_DEFER;
+		}
 
 		dsi->slave->master = dsi;
 	}
Signature · 1 line
2.34.1
author maintainer
#607 lore raw

PATCH 607/1126 power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]

The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator) mode.

Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es uses 11 when enabling the regulator at boot.

Make bq24190_vbus_is_enabled() also check for 11 so that it does not wrongly returns false when the bits are set to 11.

Fixes 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc Bastien Nocera <[email protected]>
---
 drivers/power/supply/bq24190_charger.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/power/supply/bq24190_charger.c +6 -1
index 06c34b09349c..8ad1b3b02490 100644
@@ -39,6 +39,7 @@
 #define BQ24190_REG_POC_CHG_CONFIG_DISABLE		0x0
 #define BQ24190_REG_POC_CHG_CONFIG_CHARGE		0x1
 #define BQ24190_REG_POC_CHG_CONFIG_OTG			0x2
+#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT		0x3
 #define BQ24190_REG_POC_SYS_MIN_MASK		(BIT(3) | BIT(2) | BIT(1))
 #define BQ24190_REG_POC_SYS_MIN_SHIFT		1
 #define BQ24190_REG_POC_SYS_MIN_MIN			3000
@@ -550,7 +551,11 @@ static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
 	pm_runtime_mark_last_busy(bdi->dev);
 	pm_runtime_put_autosuspend(bdi->dev);
 
-	return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+	if (ret)
+		return ret;
+
+	return (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
+		val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
 }
 
 static const struct regulator_ops bq24190_vbus_ops = {
Signature · 1 line
2.34.1
author maintainer
#608 lore raw

PATCH 608/1126 scsi: hisi_sas: Change permission of parameter prot_mask

In reply to Greg Kroah-Hartman

From: Xiang Chen <[email protected]>

[ Upstream commit c4e070457a93705e56ed06b3910d9e5fe56d3be3 ]

Currently the permission of parameter prot_mask is 0x0, which means that the member does not appear in sysfs. Change it as other module parameters to 0444 for world-readable.

[mkp: s/v3/v2/]

Fixes d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +1 -1
index a01a3a7b706b..70173389f6eb 100644
@@ -530,7 +530,7 @@ MODULE_PARM_DESC(intr_conv, "interrupt converge enable (0-1)");
 
 /* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
 static int prot_mask;
-module_param(prot_mask, int, 0);
+module_param(prot_mask, int, 0444);
 MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=0x0 ");
 
 static void debugfs_work_handler_v3_hw(struct work_struct *work);
Signature · 1 line
2.34.1
author maintainer
#609 lore raw

PATCH 609/1126 drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt

In reply to Greg Kroah-Hartman

From: Nishanth Menon <[email protected]>

[ Upstream commit ffb5c099aaa13ab7f73c29ea6ae26bce8d7575ae ]

Add MODULE_DEVICE_TABLE to the device tree table to create required aliases needed for module to be loaded with device tree based platform.

---
 drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/bridge/cdns-dsi.c +1 -0
index d8a15c459b42..829e1a144656 100644
@@ -1284,6 +1284,7 @@ static const struct of_device_id cdns_dsi_of_match[] = {
 	{ .compatible = "cdns,dsi" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, cdns_dsi_of_match);
 
 static struct platform_driver cdns_dsi_platform_driver = {
 	.probe  = cdns_dsi_drm_probe,
Signature · 1 line
2.34.1
author maintainer
#610 lore raw

PATCH 610/1126 bpf, arm64: Call build_prologue() first in first JIT pass

In reply to Greg Kroah-Hartman

From: Hou Tao <[email protected]>

[ Upstream commit 68e4f238b0e9d3670a1612ad900a6e98b2b3f7dd ]

BPF line info needs ctx->offset to be the instruction offset in the whole JITed image instead of the body itself, so also call build_prologue() first in first JIT pass.

Fixes 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
---
 arch/arm64/net/bpf_jit_comp.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
arch/arm64/net/bpf_jit_comp.c +8 -5
index e96d4d87291f..6a83f3070985 100644
@@ -1049,15 +1049,18 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		goto out_off;
 	}
 
-	/* 1. Initial fake pass to compute ctx->idx. */
-
-	/* Fake pass to fill in ctx->offset. */
-	if (build_body(&ctx, extra_pass)) {
+	/*
+	 * 1. Initial fake pass to compute ctx->idx and ctx->offset.
+	 *
+	 * BPF line info needs ctx->offset[i] to be the offset of
+	 * instruction[i] in jited image, so build prologue first.
+	 */
+	if (build_prologue(&ctx, was_classic)) {
 		prog = orig_prog;
 		goto out_off;
 	}
 
-	if (build_prologue(&ctx, was_classic)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
Signature · 1 line
2.34.1
author maintainer
#611 lore raw

PATCH 611/1126 bpf, arm64: Feed byte-offset into bpf line info

In reply to Greg Kroah-Hartman

From: Hou Tao <[email protected]>

[ Upstream commit dda7596c109fc382876118627e29db7607cde35d ]

insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in instruction granularity instead of bytes granularity, but BPF line info requires byte offset.

bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before it is freed, so convert the offset into byte-offset before calling into bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64.

Fixes 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
---
 arch/arm64/net/bpf_jit_comp.c | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm64/net/bpf_jit_comp.c +5 -0
index 6a83f3070985..cbc41e261f1e 100644
@@ -1133,6 +1133,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	prog->jited_len = prog_size;
 
 	if (!prog->is_func || extra_pass) {
+		int i;
+
+		/* offset[prog->len] is the size of program */
+		for (i = 0; i <= prog->len; i++)
+			ctx.offset[i] *= AARCH64_INSN_SIZE;
 		bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
 out_off:
 		kfree(ctx.offset);
Signature · 1 line
2.34.1
author maintainer
#612 lore raw

PATCH 612/1126 xsk: Fix race at socket teardown

In reply to Greg Kroah-Hartman

From: Magnus Karlsson <[email protected]>

[ Upstream commit 18b1ab7aa76bde181bdb1ab19a87fa9523c32f21 ]

Fix a race in the xsk socket teardown code that can lead to a NULL pointer dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any NAPI processing to terminate using synchronize_net(). After that, the release code starts to tear down the socket state and free allocated memory.

  BUG: kernel NULL pointer dereference, address: 00000000000000c0
  PGD 8000000932469067 P4D 8000000932469067 PUD 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G          I       5.16.0+ #2
  Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015
  RIP: 0010:__xsk_sendmsg+0x2c/0x690
  [...]
  RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258
  RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800
  RBP: ffffa2348bd13db0 R08: 0000000000000000 R09: 00007ffffffff000
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d5fc5489800
  R13: ffff8d5fcb0f5140 R14: ffff8d5fcb0f5140 R15: 0000000000000000
  FS:  00007f991cff9400(0000) GS:ffff8d6f1f700000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000c0 CR3: 0000000114888005 CR4: 00000000001706e0
  Call Trace:
  <TASK>
  ? aa_sk_perm+0x43/0x1b0
  xsk_sendmsg+0xf0/0x110
  sock_sendmsg+0x65/0x70
  __sys_sendto+0x113/0x190
  ? debug_smp_processor_id+0x17/0x20
  ? fpregs_assert_state_consistent+0x23/0x50
  ? exit_to_user_mode_prepare+0xa5/0x1d0
  __x64_sys_sendto+0x29/0x30
  do_syscall_64+0x3b/0xc0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

There are two problems with the current code. First, setting xs->dev to NULL before waiting for all users to stop using the socket is not correct. The entry to the data plane functions xsk_poll(), xsk_sendmsg(), and xsk_recvmsg() are all guarded by a test that xs->state is in the state XSK_BOUND and if not, it returns right away. But one process might have passed this test but still have not gotten to the point in which it uses xs->dev in the code. In this interim, a second process executing xsk_unbind_dev() might have set xs->dev to NULL which will lead to a crash for the first process. The solution here is just to get rid of this NULL assignment since it is not used anymore. Before commit 42fddcc7c64b ("xsk: use state member for socket synchronization"), xs->dev was the gatekeeper to admit processes into the data plane functions, but it was replaced with the state variable xs->state in the aforementioned commit.

The second problem is that synchronize_net() does not wait for any process in xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() to complete, which means that the state they rely on might be cleaned up prematurely. This can happen when the notifier gets called (at driver unload for example) as it uses xsk_unbind_dev(). Solve this by extending the RCU critical region from just the ndo_xsk_wakeup to the whole functions mentioned above, so that both the test of xs->state == XSK_BOUND and the last use of any member of xs is covered by the RCU critical section. This will guarantee that when synchronize_net() completes, there will be no processes left executing xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() and state can be cleaned up safely. Note that we need to drop the RCU lock for the skb xmit path as it uses functions that might sleep. Due to this, we have to retest the xs->state after we grab the mutex that protects the skb xmit code from, among a number of things, an xsk_unbind_dev() being executed from the notifier at the same time.

---
 net/xdp/xsk.c | 69 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 50 insertions(+), 19 deletions(-)
net/xdp/xsk.c +50 -19
index 28ef3f4465ae..ac343cd8ff3f 100644
@@ -403,18 +403,8 @@ EXPORT_SYMBOL(xsk_tx_peek_release_desc_batch);
 static int xsk_wakeup(struct xdp_sock *xs, u8 flags)
 {
 	struct net_device *dev = xs->dev;
-	int err;
-
-	rcu_read_lock();
-	err = dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id, flags);
-	rcu_read_unlock();
-
-	return err;
-}
 
-static int xsk_zc_xmit(struct xdp_sock *xs)
-{
-	return xsk_wakeup(xs, XDP_WAKEUP_TX);
+	return dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id, flags);
 }
 
 static void xsk_destruct_skb(struct sk_buff *skb)
@@ -533,6 +523,12 @@ static int xsk_generic_xmit(struct sock *sk)
 
 	mutex_lock(&xs->mutex);
 
+	/* Since we dropped the RCU read lock, the socket state might have changed. */
+	if (unlikely(!xsk_is_bound(xs))) {
+		err = -ENXIO;
+		goto out;
+	}
+
 	if (xs->queue_id >= xs->dev->real_num_tx_queues)
 		goto out;
 
@@ -596,16 +592,26 @@ static int xsk_generic_xmit(struct sock *sk)
 	return err;
 }
 
-static int __xsk_sendmsg(struct sock *sk)
+static int xsk_xmit(struct sock *sk)
 {
 	struct xdp_sock *xs = xdp_sk(sk);
+	int ret;
 
 	if (unlikely(!(xs->dev->flags & IFF_UP)))
 		return -ENETDOWN;
 	if (unlikely(!xs->tx))
 		return -ENOBUFS;
 
-	return xs->zc ? xsk_zc_xmit(xs) : xsk_generic_xmit(sk);
+	if (xs->zc)
+		return xsk_wakeup(xs, XDP_WAKEUP_TX);
+
+	/* Drop the RCU lock since the SKB path might sleep. */
+	rcu_read_unlock();
+	ret = xsk_generic_xmit(sk);
+	/* Reaquire RCU lock before going into common code. */
+	rcu_read_lock();
+
+	return ret;
 }
 
 static bool xsk_no_wakeup(struct sock *sk)
@@ -619,7 +625,7 @@ static bool xsk_no_wakeup(struct sock *sk)
 #endif
 }
 
-static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
+static int __xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
 {
 	bool need_wait = !(m->msg_flags & MSG_DONTWAIT);
 	struct sock *sk = sock->sk;
@@ -639,11 +645,22 @@ static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
 
 	pool = xs->pool;
 	if (pool->cached_need_wakeup & XDP_WAKEUP_TX)
-		return __xsk_sendmsg(sk);
+		return xsk_xmit(sk);
 	return 0;
 }
 
-static int xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int flags)
+static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
+{
+	int ret;
+
+	rcu_read_lock();
+	ret = __xsk_sendmsg(sock, m, total_len);
+	rcu_read_unlock();
+
+	return ret;
+}
+
+static int __xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int flags)
 {
 	bool need_wait = !(flags & MSG_DONTWAIT);
 	struct sock *sk = sock->sk;
@@ -669,6 +686,17 @@ static int xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int fl
 	return 0;
 }
 
+static int xsk_recvmsg(struct socket *sock, struct msghdr *m, size_t len, int flags)
+{
+	int ret;
+
+	rcu_read_lock();
+	ret = __xsk_recvmsg(sock, m, len, flags);
+	rcu_read_unlock();
+
+	return ret;
+}
+
 static __poll_t xsk_poll(struct file *file, struct socket *sock,
 			     struct poll_table_struct *wait)
 {
@@ -679,8 +707,11 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
 
 	sock_poll_wait(file, sock, wait);
 
-	if (unlikely(!xsk_is_bound(xs)))
+	rcu_read_lock();
+	if (unlikely(!xsk_is_bound(xs))) {
+		rcu_read_unlock();
 		return mask;
+	}
 
 	pool = xs->pool;
 
@@ -689,7 +720,7 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
 			xsk_wakeup(xs, pool->cached_need_wakeup);
 		else
 			/* Poll needs to drive Tx also in copy mode */
-			__xsk_sendmsg(sk);
+			xsk_xmit(sk);
 	}
 
 	if (xs->rx && !xskq_prod_is_empty(xs->rx))
@@ -697,6 +728,7 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock,
 	if (xs->tx && xsk_tx_writeable(xs))
 		mask |= EPOLLOUT | EPOLLWRNORM;
 
+	rcu_read_unlock();
 	return mask;
 }
 
@@ -728,7 +760,6 @@ static void xsk_unbind_dev(struct xdp_sock *xs)
 
 	/* Wait for driver to stop using the xdp socket. */
 	xp_del_xsk(xs->pool, xs);
-	xs->dev = NULL;
 	synchronize_net();
 	dev_put(dev);
 }
Signature · 1 line
2.34.1
author maintainer
#613 lore raw

PATCH 613/1126 RDMA/irdma: Fix netdev notifications for vlans

In reply to Greg Kroah-Hartman

From: Mustafa Ismail <[email protected]>

[ Upstream commit 6702bc14744847842a87fed21a795b6e8bab6965 ]

Currently, events on vlan netdevs are being ignored. Fix this by finding the real netdev and processing the notifications for vlan netdevs.

---
 drivers/infiniband/hw/irdma/utils.c | 48 ++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 18 deletions(-)
drivers/infiniband/hw/irdma/utils.c +30 -18
index 398736d8c78a..e81b74a518dd 100644
@@ -150,31 +150,35 @@ int irdma_inetaddr_event(struct notifier_block *notifier, unsigned long event,
 			 void *ptr)
 {
 	struct in_ifaddr *ifa = ptr;
-	struct net_device *netdev = ifa->ifa_dev->dev;
+	struct net_device *real_dev, *netdev = ifa->ifa_dev->dev;
 	struct irdma_device *iwdev;
 	struct ib_device *ibdev;
 	u32 local_ipaddr;
 
-	ibdev = ib_device_get_by_netdev(netdev, RDMA_DRIVER_IRDMA);
+	real_dev = rdma_vlan_dev_real_dev(netdev);
+	if (!real_dev)
+		real_dev = netdev;
+
+	ibdev = ib_device_get_by_netdev(real_dev, RDMA_DRIVER_IRDMA);
 	if (!ibdev)
 		return NOTIFY_DONE;
 
 	iwdev = to_iwdev(ibdev);
 	local_ipaddr = ntohl(ifa->ifa_address);
 	ibdev_dbg(&iwdev->ibdev,
-		  "DEV: netdev %p event %lu local_ip=%pI4 MAC=%pM\n", netdev,
-		  event, &local_ipaddr, netdev->dev_addr);
+		  "DEV: netdev %p event %lu local_ip=%pI4 MAC=%pM\n", real_dev,
+		  event, &local_ipaddr, real_dev->dev_addr);
 	switch (event) {
 	case NETDEV_DOWN:
-		irdma_manage_arp_cache(iwdev->rf, netdev->dev_addr,
+		irdma_manage_arp_cache(iwdev->rf, real_dev->dev_addr,
 				       &local_ipaddr, true, IRDMA_ARP_DELETE);
-		irdma_if_notify(iwdev, netdev, &local_ipaddr, true, false);
+		irdma_if_notify(iwdev, real_dev, &local_ipaddr, true, false);
 		irdma_gid_change_event(&iwdev->ibdev);
 		break;
 	case NETDEV_UP:
 	case NETDEV_CHANGEADDR:
-		irdma_add_arp(iwdev->rf, &local_ipaddr, true, netdev->dev_addr);
-		irdma_if_notify(iwdev, netdev, &local_ipaddr, true, true);
+		irdma_add_arp(iwdev->rf, &local_ipaddr, true, real_dev->dev_addr);
+		irdma_if_notify(iwdev, real_dev, &local_ipaddr, true, true);
 		irdma_gid_change_event(&iwdev->ibdev);
 		break;
 	default:
@@ -196,32 +200,36 @@ int irdma_inet6addr_event(struct notifier_block *notifier, unsigned long event,
 			  void *ptr)
 {
 	struct inet6_ifaddr *ifa = ptr;
-	struct net_device *netdev = ifa->idev->dev;
+	struct net_device *real_dev, *netdev = ifa->idev->dev;
 	struct irdma_device *iwdev;
 	struct ib_device *ibdev;
 	u32 local_ipaddr6[4];
 
-	ibdev = ib_device_get_by_netdev(netdev, RDMA_DRIVER_IRDMA);
+	real_dev = rdma_vlan_dev_real_dev(netdev);
+	if (!real_dev)
+		real_dev = netdev;
+
+	ibdev = ib_device_get_by_netdev(real_dev, RDMA_DRIVER_IRDMA);
 	if (!ibdev)
 		return NOTIFY_DONE;
 
 	iwdev = to_iwdev(ibdev);
 	irdma_copy_ip_ntohl(local_ipaddr6, ifa->addr.in6_u.u6_addr32);
 	ibdev_dbg(&iwdev->ibdev,
-		  "DEV: netdev %p event %lu local_ip=%pI6 MAC=%pM\n", netdev,
-		  event, local_ipaddr6, netdev->dev_addr);
+		  "DEV: netdev %p event %lu local_ip=%pI6 MAC=%pM\n", real_dev,
+		  event, local_ipaddr6, real_dev->dev_addr);
 	switch (event) {
 	case NETDEV_DOWN:
-		irdma_manage_arp_cache(iwdev->rf, netdev->dev_addr,
+		irdma_manage_arp_cache(iwdev->rf, real_dev->dev_addr,
 				       local_ipaddr6, false, IRDMA_ARP_DELETE);
-		irdma_if_notify(iwdev, netdev, local_ipaddr6, false, false);
+		irdma_if_notify(iwdev, real_dev, local_ipaddr6, false, false);
 		irdma_gid_change_event(&iwdev->ibdev);
 		break;
 	case NETDEV_UP:
 	case NETDEV_CHANGEADDR:
 		irdma_add_arp(iwdev->rf, local_ipaddr6, false,
-			      netdev->dev_addr);
-		irdma_if_notify(iwdev, netdev, local_ipaddr6, false, true);
+			      real_dev->dev_addr);
+		irdma_if_notify(iwdev, real_dev, local_ipaddr6, false, true);
 		irdma_gid_change_event(&iwdev->ibdev);
 		break;
 	default:
@@ -243,14 +251,18 @@ int irdma_net_event(struct notifier_block *notifier, unsigned long event,
 		    void *ptr)
 {
 	struct neighbour *neigh = ptr;
+	struct net_device *real_dev, *netdev = (struct net_device *)neigh->dev;
 	struct irdma_device *iwdev;
 	struct ib_device *ibdev;
 	__be32 *p;
 	u32 local_ipaddr[4] = {};
 	bool ipv4 = true;
 
-	ibdev = ib_device_get_by_netdev((struct net_device *)neigh->dev,
-					RDMA_DRIVER_IRDMA);
+	real_dev = rdma_vlan_dev_real_dev(netdev);
+	if (!real_dev)
+		real_dev = netdev;
+
+	ibdev = ib_device_get_by_netdev(real_dev, RDMA_DRIVER_IRDMA);
 	if (!ibdev)
 		return NOTIFY_DONE;
 
Signature · 1 line
2.34.1
author maintainer
#614 lore raw

PATCH 614/1126 RDMA/irdma: Fix Passthrough mode in VM

In reply to Greg Kroah-Hartman

From: Mustafa Ismail <[email protected]>

[ Upstream commit b200189626b5cefbaf8be9cadd7a28215e065bb9 ]

Using PCI_FUNC macro in a VM, when the device is in passthrough mode does not provide the real function instance. This means that currently, devices will not probe unless the instance in the VM matches the instance in the host.

Fix this by getting the pf_id from the LAN during the probe.

Fixes 8498a30e1b94 ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
---
 drivers/infiniband/hw/irdma/hw.c       | 2 +-
 drivers/infiniband/hw/irdma/i40iw_if.c | 1 +
 drivers/infiniband/hw/irdma/main.c     | 1 +
 drivers/infiniband/hw/irdma/main.h     | 1 +
 4 files changed, 4 insertions(+), 1 deletion(-)
drivers/infiniband/hw/irdma/hw.c +1 -1
index 89234d04cc65..e46e3240cc9f 100644
@@ -1608,7 +1608,7 @@ static enum irdma_status_code irdma_initialize_dev(struct irdma_pci_f *rf)
 	info.fpm_commit_buf = mem.va;
 
 	info.bar0 = rf->hw.hw_addr;
-	info.hmc_fn_id = PCI_FUNC(rf->pcidev->devfn);
+	info.hmc_fn_id = rf->pf_id;
 	info.hw = &rf->hw;
 	status = irdma_sc_dev_init(rf->rdma_ver, &rf->sc_dev, &info);
 	if (status)
drivers/infiniband/hw/irdma/i40iw_if.c +1 -0
index 43e962b97d6a..0886783db647 100644
@@ -77,6 +77,7 @@ static void i40iw_fill_device_info(struct irdma_device *iwdev, struct i40e_info
 	rf->rdma_ver = IRDMA_GEN_1;
 	rf->gen_ops.request_reset = i40iw_request_reset;
 	rf->pcidev = cdev_info->pcidev;
+	rf->pf_id = cdev_info->fid;
 	rf->hw.hw_addr = cdev_info->hw_addr;
 	rf->cdev = cdev_info;
 	rf->msix_count = cdev_info->msix_count;
drivers/infiniband/hw/irdma/main.c +1 -0
index 9fab29039f1c..5e8e8860686d 100644
@@ -226,6 +226,7 @@ static void irdma_fill_device_info(struct irdma_device *iwdev, struct ice_pf *pf
 	rf->hw.hw_addr = pf->hw.hw_addr;
 	rf->pcidev = pf->pdev;
 	rf->msix_count =  pf->num_rdma_msix;
+	rf->pf_id = pf->hw.pf_id;
 	rf->msix_entries = &pf->msix_entries[pf->rdma_base_vector];
 	rf->default_vsi.vsi_idx = vsi->vsi_num;
 	rf->protocol_used = pf->rdma_mode & IIDC_RDMA_PROTOCOL_ROCEV2 ?
drivers/infiniband/hw/irdma/main.h +1 -0
index cb218cab79ac..fb7faa85e4c9 100644
@@ -257,6 +257,7 @@ struct irdma_pci_f {
 	u8 *mem_rsrc;
 	u8 rdma_ver;
 	u8 rst_to;
+	u8 pf_id;
 	enum irdma_protocol_used protocol_used;
 	u32 sd_type;
 	u32 msix_count;
Signature · 1 line
2.34.1
author maintainer
#615 lore raw

PATCH 615/1126 RDMA/irdma: Remove incorrect masking of PD

In reply to Greg Kroah-Hartman

From: Mustafa Ismail <[email protected]>

[ Upstream commit 17850f2b0b4b806e47cc44df94186bfc2cdd490b ]

The PD id is masked with 0x7fff, while PD can be 18 bits for GEN2 HW. Remove the masking as it should not be needed and can cause incorrect PD id to be used.

Fixes b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
---
 drivers/infiniband/hw/irdma/verbs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/irdma/verbs.c +2 -2
index 460e757d3fe6..1bf6404ec834 100644
@@ -2509,7 +2509,7 @@ static int irdma_dealloc_mw(struct ib_mw *ibmw)
 	cqp_info = &cqp_request->info;
 	info = &cqp_info->in.u.dealloc_stag.info;
 	memset(info, 0, sizeof(*info));
-	info->pd_id = iwpd->sc_pd.pd_id & 0x00007fff;
+	info->pd_id = iwpd->sc_pd.pd_id;
 	info->stag_idx = ibmw->rkey >> IRDMA_CQPSQ_STAG_IDX_S;
 	info->mr = false;
 	cqp_info->cqp_cmd = IRDMA_OP_DEALLOC_STAG;
@@ -3021,7 +3021,7 @@ static int irdma_dereg_mr(struct ib_mr *ib_mr, struct ib_udata *udata)
 	cqp_info = &cqp_request->info;
 	info = &cqp_info->in.u.dealloc_stag.info;
 	memset(info, 0, sizeof(*info));
-	info->pd_id = iwpd->sc_pd.pd_id & 0x00007fff;
+	info->pd_id = iwpd->sc_pd.pd_id;
 	info->stag_idx = ib_mr->rkey >> IRDMA_CQPSQ_STAG_IDX_S;
 	info->mr = true;
 	if (iwpbl->pbl_allocated)
Signature · 1 line
2.34.1
author maintainer
#616 lore raw

PATCH 616/1126 libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning

In reply to Greg Kroah-Hartman

From: Stijn Tintel <[email protected]>

[ Upstream commit a4fbfdd7a160eccaafc093eb5b34f838b1ca0bf0 ]

When a BPF map of type BPF_MAP_TYPE_PERF_EVENT_ARRAY doesn't have the max_entries parameter set, the map will be created with max_entries set to the number of available CPUs. When we try to reuse such a pinned map, map_is_reuse_compat will return false, as max_entries in the map definition differs from max_entries of the existing map, causing the following error:

libbpf: couldn't reuse pinned map at '/sys/fs/bpf/m_logging': parameter mismatch

Fix this by overwriting max_entries in the map definition. For this to work, we need to do this in bpf_object__create_maps, before calling bpf_object__reuse_map.

Fixes 57a00f41644f ("libbpf: Add auto-pinning of maps when loading BPF objects")
---
 tools/lib/bpf/libbpf.c | 44 ++++++++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 19 deletions(-)
tools/lib/bpf/libbpf.c +25 -19
index fdb3536afa7d..94a6a8543cbc 100644
@@ -4854,7 +4854,6 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map, b
 	LIBBPF_OPTS(bpf_map_create_opts, create_attr);
 	struct bpf_map_def *def = &map->def;
 	const char *map_name = NULL;
-	__u32 max_entries;
 	int err = 0;
 
 	if (kernel_supports(obj, FEAT_PROG_NAME))
@@ -4864,21 +4863,6 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map, b
 	create_attr.numa_node = map->numa_node;
 	create_attr.map_extra = map->map_extra;
 
-	if (def->type == BPF_MAP_TYPE_PERF_EVENT_ARRAY && !def->max_entries) {
-		int nr_cpus;
-
-		nr_cpus = libbpf_num_possible_cpus();
-		if (nr_cpus < 0) {
-			pr_warn("map '%s': failed to determine number of system CPUs: %d\n",
-				map->name, nr_cpus);
-			return nr_cpus;
-		}
-		pr_debug("map '%s': setting size to %d\n", map->name, nr_cpus);
-		max_entries = nr_cpus;
-	} else {
-		max_entries = def->max_entries;
-	}
-
 	if (bpf_map__is_struct_ops(map))
 		create_attr.btf_vmlinux_value_type_id = map->btf_vmlinux_value_type_id;
 
@@ -4928,7 +4912,7 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map, b
 
 	if (obj->gen_loader) {
 		bpf_gen__map_create(obj->gen_loader, def->type, map_name,
-				    def->key_size, def->value_size, max_entries,
+				    def->key_size, def->value_size, def->max_entries,
 				    &create_attr, is_inner ? -1 : map - obj->maps);
 		/* Pretend to have valid FD to pass various fd >= 0 checks.
 		 * This fd == 0 will not be used with any syscall and will be reset to -1 eventually.
@@ -4937,7 +4921,7 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map, b
 	} else {
 		map->fd = bpf_map_create(def->type, map_name,
 					 def->key_size, def->value_size,
-					 max_entries, &create_attr);
+					 def->max_entries, &create_attr);
 	}
 	if (map->fd < 0 && (create_attr.btf_key_type_id ||
 			    create_attr.btf_value_type_id)) {
@@ -4954,7 +4938,7 @@ static int bpf_object__create_map(struct bpf_object *obj, struct bpf_map *map, b
 		map->btf_value_type_id = 0;
 		map->fd = bpf_map_create(def->type, map_name,
 					 def->key_size, def->value_size,
-					 max_entries, &create_attr);
+					 def->max_entries, &create_attr);
 	}
 
 	err = map->fd < 0 ? -errno : 0;
@@ -5058,6 +5042,24 @@ static int bpf_object_init_prog_arrays(struct bpf_object *obj)
 	return 0;
 }
 
+static int map_set_def_max_entries(struct bpf_map *map)
+{
+	if (map->def.type == BPF_MAP_TYPE_PERF_EVENT_ARRAY && !map->def.max_entries) {
+		int nr_cpus;
+
+		nr_cpus = libbpf_num_possible_cpus();
+		if (nr_cpus < 0) {
+			pr_warn("map '%s': failed to determine number of system CPUs: %d\n",
+				map->name, nr_cpus);
+			return nr_cpus;
+		}
+		pr_debug("map '%s': setting size to %d\n", map->name, nr_cpus);
+		map->def.max_entries = nr_cpus;
+	}
+
+	return 0;
+}
+
 static int
 bpf_object__create_maps(struct bpf_object *obj)
 {
@@ -5090,6 +5092,10 @@ bpf_object__create_maps(struct bpf_object *obj)
 			continue;
 		}
 
+		err = map_set_def_max_entries(map);
+		if (err)
+			goto err_out;
+
 		retried = false;
 retry:
 		if (map->pin_path) {
Signature · 1 line
2.34.1
author maintainer
#617 lore raw

PATCH 617/1126 gpu: host1x: Fix an error handling path in host1x_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit e5d5db1a79a5929b9ced99472f9a748a243d6a69 ]

Add the missing 'host1x_bo_cache_destroy()' call in the error handling path of the probe, as already done in the remove function.

In order to simplify the error handling, move the 'host1x_bo_cache_init()' call after all the devm_ function.

Fixes 1f39b1dfa53c ("drm/tegra: Implement buffer object cache")
---
 drivers/gpu/host1x/dev.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/gpu/host1x/dev.c +5 -2
index 6994f8c0e02e..9605495f001a 100644
@@ -447,7 +447,6 @@ static int host1x_probe(struct platform_device *pdev)
 	if (syncpt_irq < 0)
 		return syncpt_irq;
 
-	host1x_bo_cache_init(&host->cache);
 	mutex_init(&host->devices_lock);
 	INIT_LIST_HEAD(&host->devices);
 	INIT_LIST_HEAD(&host->list);
@@ -489,10 +488,12 @@ static int host1x_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	host1x_bo_cache_init(&host->cache);
+
 	err = host1x_iommu_init(host);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to setup IOMMU: %d\n", err);
-		return err;
+		goto destroy_cache;
 	}
 
 	err = host1x_channel_list_init(&host->channel_list,
@@ -553,6 +554,8 @@ static int host1x_probe(struct platform_device *pdev)
 	host1x_channel_list_free(&host->channel_list);
 iommu_exit:
 	host1x_iommu_exit(host);
+destroy_cache:
+	host1x_bo_cache_destroy(&host->cache);
 
 	return err;
 }
Signature · 1 line
2.34.1
author maintainer
#618 lore raw

PATCH 618/1126 gpu: host1x: Fix a memory leak in host1x_remove()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 025c6643a81564f066d8381b9e2f4603e0f8438f ]

Add a missing 'host1x_channel_list_free()' call in the remove function, as already done in the error handling path of the probe function.

Fixes 8474b02531c4 ("gpu: host1x: Refactor channel allocation code")
---
 drivers/gpu/host1x/dev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/host1x/dev.c +1 -0
index 9605495f001a..80c685ab3e30 100644
@@ -571,6 +571,7 @@ static int host1x_remove(struct platform_device *pdev)
 
 	host1x_intr_deinit(host);
 	host1x_syncpt_deinit(host);
+	host1x_channel_list_free(&host->channel_list);
 	host1x_iommu_exit(host);
 	host1x_bo_cache_destroy(&host->cache);
 
Signature · 1 line
2.34.1
author maintainer
#619 lore raw

PATCH 619/1126 libbpf: Skip forward declaration when counting duplicated type names

In reply to Greg Kroah-Hartman

From: Xu Kuohai <[email protected]>

[ Upstream commit 4226961b0019b2e1612029e8950a9e911affc995 ]

Currently if a declaration appears in the BTF before the definition, the definition is dumped as a conflicting name, e.g.:

    $ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
    [81287] FWD 'unix_sock' fwd_kind=struct
    [89336] STRUCT 'unix_sock' size=1024 vlen=14
    $ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
    struct unix_sock;
    struct unix_sock___2 {	<--- conflict, the "___2" is unexpected
		    struct unix_sock___2 *unix_sk;

This causes a compilation error if the dump output is used as a header file.

Fix it by skipping declaration when counting duplicated type names.

Fixes 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
---
 tools/lib/bpf/btf_dump.c | 5 +++++
 1 file changed, 5 insertions(+)
tools/lib/bpf/btf_dump.c +5 -0
index 07ebe70d3a30..6b1bc1f43728 100644
@@ -1505,6 +1505,11 @@ static const char *btf_dump_resolve_name(struct btf_dump *d, __u32 id,
 	if (s->name_resolved)
 		return *cached_name ? *cached_name : orig_name;
 
+	if (btf_is_fwd(t) || (btf_is_enum(t) && btf_vlen(t) == 0)) {
+		s->name_resolved = 1;
+		return orig_name;
+	}
+
 	dup_cnt = btf_dump_name_dups(d, name_map, orig_name);
 	if (dup_cnt > 1) {
 		const size_t max_len = 256;
Signature · 1 line
2.34.1
author maintainer
#620 lore raw

PATCH 620/1126 powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()

In reply to Greg Kroah-Hartman

From: Daniel Henrique Barboza <[email protected]>

[ Upstream commit 749ed4a20657bcea66a6e082ca3dc0d228cbec80 ]

Executing node_set_online() when nid = NUMA_NO_NODE results in an undefined behavior. node_set_online() will call node_set_state(), into __node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up doing a negative shift operation inside arch/powerpc/include/asm/bitops.h. This potential UB was detected running a kernel with CONFIG_UBSAN.

The behavior was introduced by commit 10f78fd0dabb ("powerpc/numa: Fix a regression on memoryless node 0"), where the check for nid > 0 was removed to fix a problem that was happening with nid = 0, but the result is that now we're trying to online NUMA_NO_NODE nids as well.

Checking for nid >= 0 will allow node 0 to be onlined while avoiding this UB with NUMA_NO_NODE.

Fixes 10f78fd0dabb ("powerpc/numa: Fix a regression on memoryless node 0")
---
 arch/powerpc/mm/numa.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/powerpc/mm/numa.c +3 -1
index 9d5f710d2c20..b9b7fefbb64b 100644
@@ -956,7 +956,9 @@ static int __init parse_numa_properties(void)
 			of_node_put(cpu);
 		}
 
-		node_set_online(nid);
+		/* node_set_online() is an UB if 'nid' is negative */
+		if (likely(nid >= 0))
+			node_set_online(nid);
 	}
 
 	get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
Signature · 1 line
2.34.1
author maintainer
#621 lore raw

PATCH 621/1126 powerpc/Makefile: Dont pass -mcpu=powerpc64 when building 32-bit

In reply to Greg Kroah-Hartman

From: Michael Ellerman <[email protected]>

[ Upstream commit 2863dd2db23e0407f6c50b8ba5c0e55abef894f1 ]

When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass -mcpu=powerpc64 to the compiler, even when we're building a 32-bit kernel.

This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in the Makefile that was written before 32-bit supported GENERIC_CPU. Prior to that the else block only applied to 64-bit Book3E.

The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big endian PowerPC ... architecture machine [type], with an appropriate, generic processor model assumed for scheduling purposes."

It's unclear how that interacts with -m32, which we are also passing, although obviously -m32 is taking precedence in some sense, as the 32-bit kernel only contains 32-bit instructions.

This was noticed by inspection, not via any bug reports, but it does affect code generation. Comparing before/after code generation, there are some changes to instruction scheduling, and the after case (with -mcpu=powerpc64 removed) the compiler seems more keen to use r8.

Fix it by making the else case only apply to Book3E 64, which excludes 32-bit.

Fixes 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32")
---
 arch/powerpc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/Makefile +1 -1
index 5f16ac1583c5..887efa31f60a 100644
@@ -171,7 +171,7 @@ else
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
 endif
-else
+else ifdef CONFIG_PPC_BOOK3E_64
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
 endif
 
Signature · 1 line
2.34.1
author maintainer
#622 lore raw

PATCH 622/1126 KVM: x86: Fix emulation in writing cr8

In reply to Greg Kroah-Hartman

From: Zhenzhong Duan <[email protected]>

[ Upstream commit f66af9f222f08d5b11ea41c1bd6c07a0f12daa07 ]

In emulation of writing to cr8, one of the lowest four bits in TPR[3:0] is kept.

According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";

and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are cleared.";

and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the current sub-priority to be used when arbitrating lowest-priority messages. This field is written with zero when TPR is written using the architectural CR8 register.";

so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior as in other scenarios.

This doesn't impact evaluation and delivery of pending virtual interrupts because processor does not use the processor-priority sub-class to determine which interrupts to delivery and which to inhibit.

Sub-class is used by hardware to arbitrate lowest priority interrupts, but KVM just does a round-robin style delivery.

Fixes b93463aa59d6 ("KVM: Accelerated apic support")

Message-Id: <[email protected]>

---
 arch/x86/kvm/lapic.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
arch/x86/kvm/lapic.c +1 -4
index 9322e6340a74..7a93ad2593c7 100644
@@ -2242,10 +2242,7 @@ void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
 
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
 {
-	struct kvm_lapic *apic = vcpu->arch.apic;
-
-	apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
-		     | (kvm_lapic_get_reg(apic, APIC_TASKPRI) & 4));
+	apic_set_tpr(vcpu->arch.apic, (cr8 & 0x0f) << 4);
 }
 
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
Signature · 1 line
2.34.1
author maintainer
#623 lore raw

PATCH 623/1126 KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()

In reply to Greg Kroah-Hartman

From: Hou Wenlong <[email protected]>

[ Upstream commit ca85f002258fdac3762c57d12d5e6e401b6a41af ]

Per Intel's SDM on the "Instruction Set Reference", when loading segment descriptor, not-present segment check should be after all type and privilege checks. But the emulator checks it first, then #NP is triggered instead of #GP if privilege fails and segment is not present. Put not-present segment check after type and privilege checks in __load_segment_descriptor().

Fixes 38ba30ba51a00 (KVM: x86 emulator: Emulate task switch in emulator.c)

Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>

---
 arch/x86/kvm/emulate.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
arch/x86/kvm/emulate.c +9 -5
index e86d610dc6b7..02d061a06aa1 100644
@@ -1623,11 +1623,6 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 		goto exception;
 	}
 
-	if (!seg_desc.p) {
-		err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
-		goto exception;
-	}
-
 	dpl = seg_desc.dpl;
 
 	switch (seg) {
@@ -1667,6 +1662,10 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 	case VCPU_SREG_TR:
 		if (seg_desc.s || (seg_desc.type != 1 && seg_desc.type != 9))
 			goto exception;
+		if (!seg_desc.p) {
+			err_vec = NP_VECTOR;
+			goto exception;
+		}
 		old_desc = seg_desc;
 		seg_desc.type |= 2; /* busy */
 		ret = ctxt->ops->cmpxchg_emulated(ctxt, desc_addr, &old_desc, &seg_desc,
@@ -1691,6 +1690,11 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 		break;
 	}
 
+	if (!seg_desc.p) {
+		err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
+		goto exception;
+	}
+
 	if (seg_desc.s) {
 		/* mark segment as accessed */
 		if (!(seg_desc.type & 1)) {
Signature · 1 line
2.34.1
author maintainer
#624 lore raw

PATCH 624/1126 KVM: SVM: Exit to userspace on ENOMEM/EFAULT GHCB errors

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

[ Upstream commit aa9f58415a8e45598bf44befa90b9d5babe09601 ]

Exit to userspace if setup_vmgexit_scratch() fails due to OOM or because copying data from guest (userspace) memory failed/faulted. The OOM scenario is clearcut, it's userspace's decision as to whether it should terminate the guest, free memory, etc...

As for -EFAULT, arguably, any guest issue is a violation of the guest's contract with userspace, and thus userspace needs to decide how to proceed. E.g. userspace defines what is RAM vs. MMIO and communicates that directly to the guest, KVM is not involved in deciding what is/isn't RAM nor in communicating that information to the guest. If the scratch GPA doesn't resolve to a memslot, then the guest is not honoring the memory configuration as defined by userspace.

And if userspace unmaps an hva for whatever reason, then exiting to userspace with -EFAULT is absolutely the right thing to do. KVM's ABI currently sucks and doesn't provide enough information to act on the -EFAULT, but that will hopefully be remedied in the future as there are multiple use cases, e.g. uffd and virtiofs truncation, that shouldn't require any work in KVM beyond returning -EFAULT with a small amount of metadata.

KVM could define its ABI such that failure to access the scratch area is reflected into the guest, i.e. establish a contract with userspace, but that's undesirable as it limits KVM's options in the future, e.g. in the potential uffd case any failure on a uaccess needs to kick out to userspace. KVM does have several cases where it reflects these errors into the guest, e.g. kvm_pv_clock_pairing() and Hyper-V emulation, but KVM would preferably "fix" those instead of propagating the falsehood that any memory failure is the guest's fault.

Lastly, returning a boolean as an "error" for that a helper that isn't named accordingly never works out well.

Fixes ad5b353240c8 ("KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure")
Cc Alper Gun <[email protected]>
Cc Peter Gonda <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/svm/sev.c | 36 +++++++++++++++++++++---------------
 1 file changed, 21 insertions(+), 15 deletions(-)
arch/x86/kvm/svm/sev.c +21 -15
index 17b53457d866..fef975852582 100644
@@ -2358,7 +2358,7 @@ static void sev_es_sync_from_ghcb(struct vcpu_svm *svm)
 	memset(ghcb->save.valid_bitmap, 0, sizeof(ghcb->save.valid_bitmap));
 }
 
-static bool sev_es_validate_vmgexit(struct vcpu_svm *svm)
+static int sev_es_validate_vmgexit(struct vcpu_svm *svm)
 {
 	struct kvm_vcpu *vcpu;
 	struct ghcb *ghcb;
@@ -2463,7 +2463,7 @@ static bool sev_es_validate_vmgexit(struct vcpu_svm *svm)
 		goto vmgexit_err;
 	}
 
-	return true;
+	return 0;
 
 vmgexit_err:
 	vcpu = &svm->vcpu;
@@ -2486,7 +2486,8 @@ static bool sev_es_validate_vmgexit(struct vcpu_svm *svm)
 	ghcb_set_sw_exit_info_1(ghcb, 2);
 	ghcb_set_sw_exit_info_2(ghcb, reason);
 
-	return false;
+	/* Resume the guest to "return" the error code. */
+	return 1;
 }
 
 void sev_es_unmap_ghcb(struct vcpu_svm *svm)
@@ -2545,7 +2546,7 @@ void pre_sev_run(struct vcpu_svm *svm, int cpu)
 }
 
 #define GHCB_SCRATCH_AREA_LIMIT		(16ULL * PAGE_SIZE)
-static bool setup_vmgexit_scratch(struct vcpu_svm *svm, bool sync, u64 len)
+static int setup_vmgexit_scratch(struct vcpu_svm *svm, bool sync, u64 len)
 {
 	struct vmcb_control_area *control = &svm->vmcb->control;
 	struct ghcb *ghcb = svm->sev_es.ghcb;
@@ -2598,14 +2599,14 @@ static bool setup_vmgexit_scratch(struct vcpu_svm *svm, bool sync, u64 len)
 		}
 		scratch_va = kvzalloc(len, GFP_KERNEL_ACCOUNT);
 		if (!scratch_va)
-			goto e_scratch;
+			return -ENOMEM;
 
 		if (kvm_read_guest(svm->vcpu.kvm, scratch_gpa_beg, scratch_va, len)) {
 			/* Unable to copy scratch area from guest */
 			pr_err("vmgexit: kvm_read_guest for scratch area failed\n");
 
 			kvfree(scratch_va);
-			goto e_scratch;
+			return -EFAULT;
 		}
 
 		/*
@@ -2621,13 +2622,13 @@ static bool setup_vmgexit_scratch(struct vcpu_svm *svm, bool sync, u64 len)
 	svm->sev_es.ghcb_sa = scratch_va;
 	svm->sev_es.ghcb_sa_len = len;
 
-	return true;
+	return 0;
 
 e_scratch:
 	ghcb_set_sw_exit_info_1(ghcb, 2);
 	ghcb_set_sw_exit_info_2(ghcb, GHCB_ERR_INVALID_SCRATCH_AREA);
 
-	return false;
+	return 1;
 }
 
 static void set_ghcb_msr_bits(struct vcpu_svm *svm, u64 value, u64 mask,
@@ -2765,17 +2766,18 @@ int sev_handle_vmgexit(struct kvm_vcpu *vcpu)
 
 	exit_code = ghcb_get_sw_exit_code(ghcb);
 
-	if (!sev_es_validate_vmgexit(svm))
-		return 1;
+	ret = sev_es_validate_vmgexit(svm);
+	if (ret)
+		return ret;
 
 	sev_es_sync_from_ghcb(svm);
 	ghcb_set_sw_exit_info_1(ghcb, 0);
 	ghcb_set_sw_exit_info_2(ghcb, 0);
 
-	ret = 1;
 	switch (exit_code) {
 	case SVM_VMGEXIT_MMIO_READ:
-		if (!setup_vmgexit_scratch(svm, true, control->exit_info_2))
+		ret = setup_vmgexit_scratch(svm, true, control->exit_info_2);
+		if (ret)
 			break;
 
 		ret = kvm_sev_es_mmio_read(vcpu,
@@ -2784,7 +2786,8 @@ int sev_handle_vmgexit(struct kvm_vcpu *vcpu)
 					   svm->sev_es.ghcb_sa);
 		break;
 	case SVM_VMGEXIT_MMIO_WRITE:
-		if (!setup_vmgexit_scratch(svm, false, control->exit_info_2))
+		ret = setup_vmgexit_scratch(svm, false, control->exit_info_2);
+		if (ret)
 			break;
 
 		ret = kvm_sev_es_mmio_write(vcpu,
@@ -2817,6 +2820,7 @@ int sev_handle_vmgexit(struct kvm_vcpu *vcpu)
 			ghcb_set_sw_exit_info_2(ghcb, GHCB_ERR_INVALID_INPUT);
 		}
 
+		ret = 1;
 		break;
 	}
 	case SVM_VMGEXIT_UNSUPPORTED_EVENT:
@@ -2836,6 +2840,7 @@ int sev_es_string_io(struct vcpu_svm *svm, int size, unsigned int port, int in)
 {
 	int count;
 	int bytes;
+	int r;
 
 	if (svm->vmcb->control.exit_info_2 > INT_MAX)
 		return -EINVAL;
@@ -2844,8 +2849,9 @@ int sev_es_string_io(struct vcpu_svm *svm, int size, unsigned int port, int in)
 	if (unlikely(check_mul_overflow(count, size, &bytes)))
 		return -EINVAL;
 
-	if (!setup_vmgexit_scratch(svm, in, bytes))
-		return 1;
+	r = setup_vmgexit_scratch(svm, in, bytes);
+	if (r)
+		return r;
 
 	return kvm_sev_es_string_io(&svm->vcpu, size, port, svm->sev_es.ghcb_sa,
 				    count, in);
Signature · 1 line
2.34.1
author maintainer
#625 lore raw

PATCH 625/1126 hv_balloon: rate-limit "Unhandled message" warning

In reply to Greg Kroah-Hartman

From: Anssi Hannula <[email protected]>

[ Upstream commit 1d7286729aa616772be334eb908e11f527e1e291 ]

For a couple of times I have encountered a situation where

hv_balloon: Unhandled message: type: 12447

is being flooded over 1 million times per second with various values, filling the log and consuming cycles, making debugging difficult.

Add rate limiting to the message.

Most other Hyper-V drivers already have similar rate limiting in their message callbacks.

The cause of the floods in my case was probably fixed by 96d9d1fa5cd5 ("Drivers: hv: balloon: account for vmbus packet header in max_pkt_size").

Fixes 9aa8b50b2b3d ("Drivers: hv: Add Hyper-V balloon driver")
---
 drivers/hv/hv_balloon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hv/hv_balloon.c +1 -1
index f2d05bff4245..439f99b8b5de 100644
@@ -1563,7 +1563,7 @@ static void balloon_onchannelcallback(void *context)
 			break;
 
 		default:
-			pr_warn("Unhandled message: type: %d\n", dm_hdr->type);
+			pr_warn_ratelimited("Unhandled message: type: %d\n", dm_hdr->type);
 
 		}
 	}
Signature · 1 line
2.34.1
author maintainer
#626 lore raw

PATCH 626/1126 KVM: arm64: Enable Cortex-A510 erratum 2077057 by default

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

[ Upstream commit 4c11113c1a3d10f5b617e5d2b9acd8d1d715450f ]

The recently added configuration option for Cortex A510 erratum 2077057 does not have a "default y" unlike other errata fixes. This appears to simply be an oversight since the help text suggests enabling the option if unsure and there's nothing in the commit log to suggest it is intentional.

Fixes 1dd498e5e26ad ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
---
 arch/arm64/Kconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/Kconfig +1 -0
index c842878f8133..baa0e9bbe754 100644
@@ -683,6 +683,7 @@ config ARM64_ERRATUM_2051678
 
 config ARM64_ERRATUM_2077057
 	bool "Cortex-A510: 2077057: workaround software-step corrupting SPSR_EL2"
+	default y
 	help
 	  This option adds the workaround for ARM Cortex-A510 erratum 2077057.
 	  Affected Cortex-A510 may corrupt SPSR_EL2 when the a step exception is
Signature · 1 line
2.34.1
author maintainer
#627 lore raw

PATCH 627/1126 i2c: xiic: Make bus names unique

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

[ Upstream commit 1d366c2f9df8279df2adbb60471f86fc40a1c39e ]

This driver is for an FPGA logic core, so there can be arbitrarily many instances of the bus on a given system. Previously all of the I2C bus names were "xiic-i2c" which caused issues with lm_sensors when trying to map human-readable names to sensor inputs because it could not properly distinguish the busses, for example. Append the platform device name to the I2C bus name so it is unique between different instances.

Fixes e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
---
 drivers/i2c/busses/i2c-xiic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-xiic.c +2 -1
index eb789cfb9973..ffefe3c482e9 100644
@@ -734,7 +734,6 @@ static const struct i2c_adapter_quirks xiic_quirks = {
 
 static const struct i2c_adapter xiic_adapter = {
 	.owner = THIS_MODULE,
-	.name = DRIVER_NAME,
 	.class = I2C_CLASS_DEPRECATED,
 	.algo = &xiic_algorithm,
 	.quirks = &xiic_quirks,
@@ -771,6 +770,8 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 DRIVER_NAME " %s", pdev->name);
 
 	mutex_init(&i2c->lock);
 
Signature · 1 line
2.34.1
author maintainer
#628 lore raw

PATCH 628/1126 net: phy: micrel: Fix concurrent register access

In reply to Greg Kroah-Hartman

From: Divya Koppera <[email protected]>

[ Upstream commit 4488f6b6148045424459ef1d5b153c6895ee1dbb ]

Make Extended page register accessing atomic,
to overcome unexpected output from register
reads/writes.

Fixes 7c2dcfa295b1 ("net: phy: micrel: Add support for LAN8804 PHY")
---
 drivers/net/phy/micrel.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
drivers/net/phy/micrel.c +16 -14
index a7ebcdab415b..281cebc3d00c 100644
@@ -1596,11 +1596,13 @@ static int lanphy_read_page_reg(struct phy_device *phydev, int page, u32 addr)
 {
 	u32 data;
 
-	phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
-	phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
-	phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
-		  (page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC));
-	data = phy_read(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA);
+	phy_lock_mdio_bus(phydev);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
+		    (page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC));
+	data = __phy_read(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA);
+	phy_unlock_mdio_bus(phydev);
 
 	return data;
 }
@@ -1608,18 +1610,18 @@ static int lanphy_read_page_reg(struct phy_device *phydev, int page, u32 addr)
 static int lanphy_write_page_reg(struct phy_device *phydev, int page, u16 addr,
 				 u16 val)
 {
-	phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
-	phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
-	phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
-		  (page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC));
+	phy_lock_mdio_bus(phydev);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
+	__phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
+		    page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC);
 
-	val = phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, val);
-	if (val) {
+	val = __phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, val);
+	if (val != 0)
 		phydev_err(phydev, "Error: phy_write has returned error %d\n",
 			   val);
-		return val;
-	}
-	return 0;
+	phy_unlock_mdio_bus(phydev);
+	return val;
 }
 
 static int lan8814_config_init(struct phy_device *phydev)
Signature · 1 line
2.34.1
author maintainer
#629 lore raw

PATCH 629/1126 Bluetooth: hci_sync: fix undefined return of hci_disconnect_all_sync()

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 8cd3c55c629efd91e5f2b3e89d850575c5b90d47 ]

clang static analysis reports this problem hci_sync.c:4428:2: warning: Undefined or garbage value
returned to caller

        return err;
        ^~~~~~~~~~

If there are no connections this function is a noop but err is never set and a false error could be reported. Return 0 as other hci_* functions do.

Fixes 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
---
 net/bluetooth/hci_sync.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/hci_sync.c +1 -1
index 5e93f37c2e04..405d48c3e63e 100644
@@ -4432,7 +4432,7 @@ static int hci_disconnect_all_sync(struct hci_dev *hdev, u8 reason)
 			return err;
 	}
 
-	return err;
+	return 0;
 }
 
 /* This function perform power off HCI command sequence as follows:
Signature · 1 line
2.34.1
author maintainer
#630 lore raw

PATCH 630/1126 Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()

In reply to Greg Kroah-Hartman

From: Radoslaw Biernacki <[email protected]>

[ Upstream commit ba17bb62ce415950753c19d16bb43b2bd3701158 ]

This patch fixes skb allocation, as lack of space for ev might push skb tail beyond its end.
Also introduce eir_precalc_len() that can be used instead of magic numbers for similar eir operations on skb.

Fixes cf1bce1de7eeb ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND")
Fixes e96741437ef0a ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED")
---
 net/bluetooth/eir.h  |  5 +++++
 net/bluetooth/mgmt.c | 18 ++++++++----------
 2 files changed, 13 insertions(+), 10 deletions(-)
net/bluetooth/eir.h +5 -0
index 05e2e917fc25..e5876751f07e 100644
@@ -15,6 +15,11 @@ u8 eir_create_scan_rsp(struct hci_dev *hdev, u8 instance, u8 *ptr);
 u8 eir_append_local_name(struct hci_dev *hdev, u8 *eir, u8 ad_len);
 u8 eir_append_appearance(struct hci_dev *hdev, u8 *ptr, u8 ad_len);
 
+static inline u16 eir_precalc_len(u8 data_len)
+{
+	return sizeof(u8) * 2 + data_len;
+}
+
 static inline u16 eir_append_data(u8 *eir, u16 eir_len, u8 type,
 				  u8 *data, u8 data_len)
 {
net/bluetooth/mgmt.c +8 -10
index 230a7a8196c0..15eab8b968ce 100644
@@ -9086,12 +9086,14 @@ void mgmt_device_connected(struct hci_dev *hdev, struct hci_conn *conn,
 	u16 eir_len = 0;
 	u32 flags = 0;
 
+	/* allocate buff for LE or BR/EDR adv */
 	if (conn->le_adv_data_len > 0)
 		skb = mgmt_alloc_skb(hdev, MGMT_EV_DEVICE_CONNECTED,
-				     conn->le_adv_data_len);
+				     sizeof(*ev) + conn->le_adv_data_len);
 	else
 		skb = mgmt_alloc_skb(hdev, MGMT_EV_DEVICE_CONNECTED,
-				     2 + name_len + 5);
+				     sizeof(*ev) + (name ? eir_precalc_len(name_len) : 0) +
+				     eir_precalc_len(sizeof(conn->dev_class)));
 
 	ev = skb_put(skb, sizeof(*ev));
 	bacpy(&ev->addr.bdaddr, &conn->dst);
@@ -9707,13 +9709,11 @@ void mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
 {
 	struct sk_buff *skb;
 	struct mgmt_ev_device_found *ev;
-	u16 eir_len;
-	u32 flags;
+	u16 eir_len = 0;
+	u32 flags = 0;
 
-	if (name_len)
-		skb = mgmt_alloc_skb(hdev, MGMT_EV_DEVICE_FOUND, 2 + name_len);
-	else
-		skb = mgmt_alloc_skb(hdev, MGMT_EV_DEVICE_FOUND, 0);
+	skb = mgmt_alloc_skb(hdev, MGMT_EV_DEVICE_FOUND,
+			     sizeof(*ev) + (name ? eir_precalc_len(name_len) : 0));
 
 	ev = skb_put(skb, sizeof(*ev));
 	bacpy(&ev->addr.bdaddr, bdaddr);
@@ -9723,10 +9723,8 @@ void mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
 	if (name) {
 		eir_len = eir_append_data(ev->eir, 0, EIR_NAME_COMPLETE, name,
 					  name_len);
-		flags = 0;
 		skb_put(skb, eir_len);
 	} else {
-		eir_len = 0;
 		flags = MGMT_DEV_FOUND_NAME_REQUEST_FAILED;
 	}
 
Signature · 1 line
2.34.1
author maintainer
#631 lore raw

PATCH 631/1126 power: supply: wm8350-power: Handle error for wm8350_register_irq

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit b0b14b5ba11bec56fad344a4a0b2e16449cc8b94 ]

As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, use 'free_' in order to avoid same code.

Fixes 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
---
 drivers/power/supply/wm8350_power.c | 96 ++++++++++++++++++++++++-----
 1 file changed, 82 insertions(+), 14 deletions(-)
drivers/power/supply/wm8350_power.c +82 -14
index e05cee457471..9c46c48dccb1 100644
@@ -408,44 +408,112 @@ static const struct power_supply_desc wm8350_usb_desc = {
  *		Initialisation
  *********************************************************************/
 
-static void wm8350_init_charger(struct wm8350 *wm8350)
+static int wm8350_init_charger(struct wm8350 *wm8350)
 {
+	int ret;
+
 	/* register our interest in charger events */
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
 			    wm8350_charger_handler, 0, "Battery hot", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
+	if (ret)
+		goto err;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
 			    wm8350_charger_handler, 0, "Battery cold", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
+	if (ret)
+		goto free_chg_bat_hot;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
 			    wm8350_charger_handler, 0, "Battery fail", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
+	if (ret)
+		goto free_chg_bat_cold;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
 			    wm8350_charger_handler, 0,
 			    "Charger timeout", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
+	if (ret)
+		goto free_chg_bat_fail;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
 			    wm8350_charger_handler, 0,
 			    "Charge end", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
+	if (ret)
+		goto free_chg_to;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
 			    wm8350_charger_handler, 0,
 			    "Charge start", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
+	if (ret)
+		goto free_chg_end;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
 			    wm8350_charger_handler, 0,
 			    "Fast charge ready", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
+	if (ret)
+		goto free_chg_start;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
 			    wm8350_charger_handler, 0,
 			    "Battery <3.9V", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
+	if (ret)
+		goto free_chg_fast_rdy;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
 			    wm8350_charger_handler, 0,
 			    "Battery <3.1V", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
+	if (ret)
+		goto free_chg_vbatt_lt_3p9;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
 			    wm8350_charger_handler, 0,
 			    "Battery <2.85V", wm8350);
+	if (ret)
+		goto free_chg_vbatt_lt_3p1;
 
 	/* and supply change events */
-	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
 			    wm8350_charger_handler, 0, "USB", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
+	if (ret)
+		goto free_chg_vbatt_lt_2p85;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
 			    wm8350_charger_handler, 0, "Wall", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
+	if (ret)
+		goto free_ext_usb_fb;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
 			    wm8350_charger_handler, 0, "Battery", wm8350);
+	if (ret)
+		goto free_ext_wall_fb;
+
+	return 0;
+
+free_ext_wall_fb:
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+free_ext_usb_fb:
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+free_chg_vbatt_lt_2p85:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+free_chg_vbatt_lt_3p1:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+free_chg_vbatt_lt_3p9:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+free_chg_fast_rdy:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+free_chg_start:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+free_chg_end:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+free_chg_to:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+free_chg_bat_fail:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+free_chg_bat_cold:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+free_chg_bat_hot:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+err:
+	return ret;
 }
 
 static void free_charger_irq(struct wm8350 *wm8350)
Signature · 1 line
2.34.1
author maintainer
#632 lore raw

PATCH 632/1126 power: supply: wm8350-power: Add missing free in free_charger_irq

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 6dee930f6f6776d1e5a7edf542c6863b47d9f078 ]

In free_charger_irq(), there is no free for 'WM8350_IRQ_CHG_FAST_RDY'. Therefore, it should be better to add it in order to avoid the memory leak.

Fixes 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
---
 drivers/power/supply/wm8350_power.c | 1 +
 1 file changed, 1 insertion(+)
drivers/power/supply/wm8350_power.c +1 -0
index 9c46c48dccb1..908cfd45d262 100644
@@ -524,6 +524,7 @@ static void free_charger_irq(struct wm8350 *wm8350)
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
Signature · 1 line
2.34.1
author maintainer
#633 lore raw

PATCH 633/1126 IB/hfi1: Allow larger MTU without AIP

In reply to Greg Kroah-Hartman

From: Mike Marciniszyn <[email protected]>

[ Upstream commit b135e324d7a2e7fa0a7ef925076136e799b79f44 ]

The AIP code signals the phys_mtu in the following query_port() fragment:

	props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
				ib_mtu_enum_to_int(props->max_mtu);

Using the largest MTU possible should not depend on AIP.

Fix by unconditionally using the hfi1_max_mtu value.

---
 drivers/infiniband/hw/hfi1/verbs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/infiniband/hw/hfi1/verbs.c +1 -2
index dc9211f3a009..99d0743133ca 100644
@@ -1397,8 +1397,7 @@ static int query_port(struct rvt_dev_info *rdi, u32 port_num,
 				      4096 : hfi1_max_mtu), IB_MTU_4096);
 	props->active_mtu = !valid_ib_mtu(ppd->ibmtu) ? props->max_mtu :
 		mtu_to_enum(ppd->ibmtu, IB_MTU_4096);
-	props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
-				ib_mtu_enum_to_int(props->max_mtu);
+	props->phys_mtu = hfi1_max_mtu;
 
 	return 0;
 }
Signature · 1 line
2.34.1
author maintainer
#634 lore raw

PATCH 634/1126 RDMA/core: Fix ib_qp_usecnt_dec() called when error

In reply to Greg Kroah-Hartman

From: Yajun Deng <[email protected]>

[ Upstream commit 7c4a539ec38f4ce400a0f3fcb5ff6c940fcd67bb ]

ib_destroy_qp() would called by ib_create_qp_user() if error, the former contains ib_qp_usecnt_dec(), but ib_qp_usecnt_inc() was not called before.

So move ib_qp_usecnt_inc() into create_qp().

Fixes d2b10794fc13 ("RDMA/core: Create clean QP creations interface for uverbs")
---
 drivers/infiniband/core/uverbs_cmd.c          | 1 -
 drivers/infiniband/core/uverbs_std_types_qp.c | 1 -
 drivers/infiniband/core/verbs.c               | 3 +--
 3 files changed, 1 insertion(+), 4 deletions(-)
drivers/infiniband/core/uverbs_cmd.c +0 -1
index 6b6393176b3c..4437f834c0a7 100644
@@ -1437,7 +1437,6 @@ static int create_qp(struct uverbs_attr_bundle *attrs,
 		ret = PTR_ERR(qp);
 		goto err_put;
 	}
-	ib_qp_usecnt_inc(qp);
 
 	obj->uevent.uobject.object = qp;
 	obj->uevent.event_file = READ_ONCE(attrs->ufile->default_async_file);
drivers/infiniband/core/uverbs_std_types_qp.c +0 -1
index dd1075466f61..75353e09c6fe 100644
@@ -254,7 +254,6 @@ static int UVERBS_HANDLER(UVERBS_METHOD_QP_CREATE)(
 		ret = PTR_ERR(qp);
 		goto err_put;
 	}
-	ib_qp_usecnt_inc(qp);
 
 	if (attr.qp_type == IB_QPT_XRC_TGT) {
 		obj->uxrcd = container_of(xrcd_uobj, struct ib_uxrcd_object,
drivers/infiniband/core/verbs.c +1 -2
index e821dc94a43e..961055eb330d 100644
@@ -1253,6 +1253,7 @@ static struct ib_qp *create_qp(struct ib_device *dev, struct ib_pd *pd,
 	if (ret)
 		goto err_security;
 
+	ib_qp_usecnt_inc(qp);
 	rdma_restrack_add(&qp->res);
 	return qp;
 
@@ -1353,8 +1354,6 @@ struct ib_qp *ib_create_qp_kernel(struct ib_pd *pd,
 	if (IS_ERR(qp))
 		return qp;
 
-	ib_qp_usecnt_inc(qp);
-
 	if (qp_init_attr->cap.max_rdma_ctxs) {
 		ret = rdma_rw_init_mrs(qp, qp_init_attr);
 		if (ret)
Signature · 1 line
2.34.1
author maintainer
#635 lore raw

PATCH 635/1126 PCI: Reduce warnings on possible RW1C corruption

In reply to Greg Kroah-Hartman

From: Mark Tomlinson <[email protected]>

[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ]

For hardware that only supports 32-bit writes to PCI there is the possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited messages was introduced by fb2659230120, but rate-limiting is not the best choice here. Some devices may not show the warnings they should if another device has just produced a bunch of warnings. Also, the number of messages can be a nuisance on devices which are otherwise working fine.

Change the ratelimit to a single warning per bus. This ensures no bus is 'starved' of emitting a warning and also that there isn't a continuous stream of warnings. It would be preferable to have a warning per device, but the pci_dev structure is not available here, and a lookup from devfn would be far too slow.

---
 drivers/pci/access.c | 9 ++++++---
 include/linux/pci.h  | 1 +
 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/pci/access.c +6 -3
index 0d9f6b21babb..708c7529647f 100644
@@ -159,9 +159,12 @@ int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn,
 	 * write happen to have any RW1C (write-one-to-clear) bits set, we
 	 * just inadvertently cleared something we shouldn't have.
 	 */
-	dev_warn_ratelimited(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
-			     size, pci_domain_nr(bus), bus->number,
-			     PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+	if (!bus->unsafe_warn) {
+		dev_warn(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
+			 size, pci_domain_nr(bus), bus->number,
+			 PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+		bus->unsafe_warn = 1;
+	}
 
 	mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
 	tmp = readl(addr) & mask;
include/linux/pci.h +1 -0
index 8253a5413d7c..678fecdf6b81 100644
@@ -668,6 +668,7 @@ struct pci_bus {
 	struct bin_attribute	*legacy_io;	/* Legacy I/O for this bus */
 	struct bin_attribute	*legacy_mem;	/* Legacy mem */
 	unsigned int		is_added:1;
+	unsigned int		unsafe_warn:1;	/* warned about RW1C config write */
 };
 
 #define to_pci_bus(n)	container_of(n, struct pci_bus, dev)
Signature · 1 line
2.34.1
author maintainer
#636 lore raw

PATCH 636/1126 net: axienet: fix RX ring refill allocation failure handling

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

[ Upstream commit 7a7d340ba4d9351e4c8847b898a2b996727a922a ]

If a memory allocation error occurred during an attempt to refill a slot in the RX ring after the packet was received, the hardware tail pointer would still have been updated to point to or past the slot which remained marked as previously completed. This would likely result in the DMA engine raising an error when it eventually tried to use that slot again.

If a slot cannot be refilled, then just stop processing and do not move the tail pointer past it. On the next attempt, we should skip receiving the packet from the empty slot and just try to refill it again.

This failure mode has not actually been observed, but was found as part of other driver updates.

Fixes 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 72 +++++++++++--------
 1 file changed, 42 insertions(+), 30 deletions(-)
drivers/net/ethernet/xilinx/xilinx_axienet_main.c +42 -30
index 377c94ec2486..90d96eb79984 100644
@@ -857,46 +857,53 @@ static void axienet_recv(struct net_device *ndev)
 	while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
 		dma_addr_t phys;
 
-		tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
-
 		/* Ensure we see complete descriptor update */
 		dma_rmb();
-		phys = desc_get_phys_addr(lp, cur_p);
-		dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
-				 DMA_FROM_DEVICE);
 
 		skb = cur_p->skb;
 		cur_p->skb = NULL;
-		length = cur_p->app4 & 0x0000FFFF;
-
-		skb_put(skb, length);
-		skb->protocol = eth_type_trans(skb, ndev);
-		/*skb_checksum_none_assert(skb);*/
-		skb->ip_summed = CHECKSUM_NONE;
-
-		/* if we're doing Rx csum offload, set it up */
-		if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
-			csumstatus = (cur_p->app2 &
-				      XAE_FULL_CSUM_STATUS_MASK) >> 3;
-			if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) ||
-			    (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) {
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		/* skb could be NULL if a previous pass already received the
+		 * packet for this slot in the ring, but failed to refill it
+		 * with a newly allocated buffer. In this case, don't try to
+		 * receive it again.
+		 */
+		if (likely(skb)) {
+			length = cur_p->app4 & 0x0000FFFF;
+
+			phys = desc_get_phys_addr(lp, cur_p);
+			dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
+					 DMA_FROM_DEVICE);
+
+			skb_put(skb, length);
+			skb->protocol = eth_type_trans(skb, ndev);
+			/*skb_checksum_none_assert(skb);*/
+			skb->ip_summed = CHECKSUM_NONE;
+
+			/* if we're doing Rx csum offload, set it up */
+			if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
+				csumstatus = (cur_p->app2 &
+					      XAE_FULL_CSUM_STATUS_MASK) >> 3;
+				if (csumstatus == XAE_IP_TCP_CSUM_VALIDATED ||
+				    csumstatus == XAE_IP_UDP_CSUM_VALIDATED) {
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+				}
+			} else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
+				   skb->protocol == htons(ETH_P_IP) &&
+				   skb->len > 64) {
+				skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
+				skb->ip_summed = CHECKSUM_COMPLETE;
 			}
-		} else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
-			   skb->protocol == htons(ETH_P_IP) &&
-			   skb->len > 64) {
-			skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
-			skb->ip_summed = CHECKSUM_COMPLETE;
-		}
 
-		netif_rx(skb);
+			netif_rx(skb);
 
-		size += length;
-		packets++;
+			size += length;
+			packets++;
+		}
 
 		new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size);
 		if (!new_skb)
-			return;
+			break;
 
 		phys = dma_map_single(ndev->dev.parent, new_skb->data,
 				      lp->max_frm_size,
@@ -905,7 +912,7 @@ static void axienet_recv(struct net_device *ndev)
 			if (net_ratelimit())
 				netdev_err(ndev, "RX DMA mapping error\n");
 			dev_kfree_skb(new_skb);
-			return;
+			break;
 		}
 		desc_set_phys_addr(lp, phys, cur_p);
 
@@ -913,6 +920,11 @@ static void axienet_recv(struct net_device *ndev)
 		cur_p->status = 0;
 		cur_p->skb = new_skb;
 
+		/* Only update tail_p to mark this slot as usable after it has
+		 * been successfully refilled.
+		 */
+		tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+
 		if (++lp->rx_bd_ci >= lp->rx_bd_num)
 			lp->rx_bd_ci = 0;
 		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
Signature · 1 line
2.34.1
author maintainer
#637 lore raw

PATCH 637/1126 drm/msm/a6xx: Fix missing ARRAY_SIZE() check

In reply to Greg Kroah-Hartman

From: Rob Clark <[email protected]>

[ Upstream commit cca96584b35765bf9eb5f38ca55a144ea2ba0de4 ]

Fixes f6d62d091cfd ("drm/msm/a6xx: add support for Adreno 660 GPU")
---
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/msm/adreno/a6xx_gpu.c +8 -4
index 17cfad6424db..616be7265da4 100644
@@ -655,19 +655,23 @@ static void a6xx_set_cp_protect(struct msm_gpu *gpu)
 {
 	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
 	const u32 *regs = a6xx_protect;
-	unsigned i, count = ARRAY_SIZE(a6xx_protect), count_max = 32;
-
-	BUILD_BUG_ON(ARRAY_SIZE(a6xx_protect) > 32);
-	BUILD_BUG_ON(ARRAY_SIZE(a650_protect) > 48);
+	unsigned i, count, count_max;
 
 	if (adreno_is_a650(adreno_gpu)) {
 		regs = a650_protect;
 		count = ARRAY_SIZE(a650_protect);
 		count_max = 48;
+		BUILD_BUG_ON(ARRAY_SIZE(a650_protect) > 48);
 	} else if (adreno_is_a660_family(adreno_gpu)) {
 		regs = a660_protect;
 		count = ARRAY_SIZE(a660_protect);
 		count_max = 48;
+		BUILD_BUG_ON(ARRAY_SIZE(a660_protect) > 48);
+	} else {
+		regs = a6xx_protect;
+		count = ARRAY_SIZE(a6xx_protect);
+		count_max = 32;
+		BUILD_BUG_ON(ARRAY_SIZE(a6xx_protect) > 32);
 	}
 
 	/*
Signature · 1 line
2.34.1
author maintainer
#638 lore raw

PATCH 638/1126 mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 97bf0395c226907e1a9b908511a35192bf1e09bb ]

Include the DECstation interrupt handler in opting out of FPU support.

Fixes a linker error:

mips-linux-ld: arch/mips/dec/int-handler.o: in function `fpu':
(.text+0x148): undefined reference to `handle_fpe_int'

Fixes 183b40f992c8 ("MIPS: Allow FP support to be disabled")
Cc Paul Burton <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Maciej W. Rozycki <[email protected]>
---
 arch/mips/dec/int-handler.S | 6 +++---
 arch/mips/dec/setup.c       | 3 ++-
 2 files changed, 5 insertions(+), 4 deletions(-)
arch/mips/dec/int-handler.S +3 -3
index ea5b5a83f1e1..011d1d678840 100644
@@ -131,7 +131,7 @@
 		 */
 		mfc0	t0,CP0_CAUSE		# get pending interrupts
 		mfc0	t1,CP0_STATUS
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 		lw	t2,cpu_fpu_mask
 #endif
 		andi	t0,ST0_IM		# CAUSE.CE may be non-zero!
@@ -139,7 +139,7 @@
 
 		beqz	t0,spurious
 
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 		 and	t2,t0
 		bnez	t2,fpu			# handle FPU immediately
 #endif
@@ -280,7 +280,7 @@ handle_it:
 		j	dec_irq_dispatch
 		 nop
 
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 fpu:
 		lw	t0,fpu_kstat_irq
 		nop
arch/mips/dec/setup.c +2 -1
index a8a30bb1dee8..82b00e45ce50 100644
@@ -746,7 +746,8 @@ void __init arch_init_irq(void)
 		dec_interrupt[DEC_IRQ_HALT] = -1;
 
 	/* Register board interrupts: FPU and cascade. */
-	if (dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT) &&
+	    dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
 		struct irq_desc *desc_fpu;
 		int irq_fpu;
 
Signature · 1 line
2.34.1
author maintainer
#639 lore raw

PATCH 639/1126 MIPS: Sanitise Cavium switch cases in TLB handler synthesizers

In reply to Greg Kroah-Hartman

From: Maciej W. Rozycki <[email protected]>

[ Upstream commit 6ddcba9d480b6bcced4223a729794dfa6becb7eb ]

It makes no sense to fall through to `break'. Therefore reorder the switch statements so as to have the Cavium cases first, followed by the default case, which improves readability and pacifies code analysis tools. No change in semantics, assembly produced is exactly the same.

Fixes bc431d2153cc ("MIPS: Fix fall-through warnings for Clang")
---
 arch/mips/mm/tlbex.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)
arch/mips/mm/tlbex.c +10 -13
index b131e6a77383..5cda07688f67 100644
@@ -2160,16 +2160,14 @@ static void build_r4000_tlb_load_handler(void)
 		uasm_i_tlbr(&p);
 
 		switch (current_cpu_type()) {
-		default:
-			if (cpu_has_mips_r2_exec_hazard) {
-				uasm_i_ehb(&p);
-			fallthrough;
-
 		case CPU_CAVIUM_OCTEON:
 		case CPU_CAVIUM_OCTEON_PLUS:
 		case CPU_CAVIUM_OCTEON2:
-				break;
-			}
+			break;
+		default:
+			if (cpu_has_mips_r2_exec_hazard)
+				uasm_i_ehb(&p);
+			break;
 		}
 
 		/* Examine  entrylo 0 or 1 based on ptr. */
@@ -2236,15 +2234,14 @@ static void build_r4000_tlb_load_handler(void)
 		uasm_i_tlbr(&p);
 
 		switch (current_cpu_type()) {
-		default:
-			if (cpu_has_mips_r2_exec_hazard) {
-				uasm_i_ehb(&p);
-
 		case CPU_CAVIUM_OCTEON:
 		case CPU_CAVIUM_OCTEON_PLUS:
 		case CPU_CAVIUM_OCTEON2:
-				break;
-			}
+			break;
+		default:
+			if (cpu_has_mips_r2_exec_hazard)
+				uasm_i_ehb(&p);
+			break;
 		}
 
 		/* Examine  entrylo 0 or 1 based on ptr. */
Signature · 1 line
2.34.1
author maintainer
#640 lore raw

PATCH 640/1126 powerpc/sysdev: fix incorrect use to determine if list is empty

In reply to Greg Kroah-Hartman

From: Jakob Koschel <[email protected]>

[ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ]

'gtm' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the list is empty.

Instead of checking the pointer it should be checked if the list is empty.

Fixes 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support")
---
 arch/powerpc/sysdev/fsl_gtm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/sysdev/fsl_gtm.c +2 -2
index 8963eaffb1b7..39186ad6b3c3 100644
@@ -86,7 +86,7 @@ static LIST_HEAD(gtms);
  */
 struct gtm_timer *gtm_get_timer16(void)
 {
-	struct gtm *gtm = NULL;
+	struct gtm *gtm;
 	int i;
 
 	list_for_each_entry(gtm, &gtms, list_node) {
@@ -103,7 +103,7 @@ struct gtm_timer *gtm_get_timer16(void)
 		spin_unlock_irq(&gtm->lock);
 	}
 
-	if (gtm)
+	if (!list_empty(&gtms))
 		return ERR_PTR(-EBUSY);
 	return ERR_PTR(-ENODEV);
 }
Signature · 1 line
2.34.1
author maintainer
#641 lore raw

PATCH 641/1126 powerpc/64s: Dont use DSISR for SLB faults

In reply to Greg Kroah-Hartman

From: Michael Ellerman <[email protected]>

[ Upstream commit d4679ac8ea2e5078704aa1c026db36580cc1bf9a ]

Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly.

But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either.

This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command:

0:mon> d 0x5deadbeef0000000
5deadbeef0000000

  [359526.415354][    C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000
  [359526.415611][    C6] Faulting instruction address: 0xc00000000010a300
  cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400]
      pc: c00000000010a300: mread+0x90/0x190

If we disassemble the PC, we see a load instruction:

0:mon> di c00000000010a300
c00000000010a300 89490000 lbz r10,0(r9)

We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault.

Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it.

The result looks like eg:

0:mon> d 0x5deadbeef0000000
5deadbeef0000000

  [  721.779525][    C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000
  [  721.779697][    C6] Faulting instruction address: 0xc00000000014cbe0
  cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]

0:mon> d 0
0000000000000000

  [  742.793242][    C6] BUG: Kernel NULL pointer dereference at 0x00000000
  [  742.793316][    C6] Faulting instruction address: 0xc00000000014cbe0
  cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]
Fixes 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.")
---
 arch/powerpc/mm/fault.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
arch/powerpc/mm/fault.c +10 -4
index eb8ecd7343a9..7ba6d3eff636 100644
@@ -567,18 +567,24 @@ NOKPROBE_SYMBOL(hash__do_page_fault);
 static void __bad_page_fault(struct pt_regs *regs, int sig)
 {
 	int is_write = page_fault_is_write(regs->dsisr);
+	const char *msg;
 
 	/* kernel has accessed a bad area */
 
+	if (regs->dar < PAGE_SIZE)
+		msg = "Kernel NULL pointer dereference";
+	else
+		msg = "Unable to handle kernel data access";
+
 	switch (TRAP(regs)) {
 	case INTERRUPT_DATA_STORAGE:
-	case INTERRUPT_DATA_SEGMENT:
 	case INTERRUPT_H_DATA_STORAGE:
-		pr_alert("BUG: %s on %s at 0x%08lx\n",
-			 regs->dar < PAGE_SIZE ? "Kernel NULL pointer dereference" :
-			 "Unable to handle kernel data access",
+		pr_alert("BUG: %s on %s at 0x%08lx\n", msg,
 			 is_write ? "write" : "read", regs->dar);
 		break;
+	case INTERRUPT_DATA_SEGMENT:
+		pr_alert("BUG: %s at 0x%08lx\n", msg, regs->dar);
+		break;
 	case INTERRUPT_INST_STORAGE:
 	case INTERRUPT_INST_SEGMENT:
 		pr_alert("BUG: Unable to handle kernel instruction fetch%s",
Signature · 1 line
2.34.1
author maintainer
#642 lore raw

PATCH 642/1126 mfd: mc13xxx: Add check for mc13xxx_irq_request

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit e477e51a41cb5d6034f3c5ea85a71ad4613996b9 ]

As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value of the mc13xxx_irq_request() and return error if fails.

Fixes 8e00593557c3 ("mfd: Add mc13892 support to mc13xxx")
---
 drivers/mfd/mc13xxx-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mfd/mc13xxx-core.c +3 -1
index 8a4f1d90dcfd..1000572761a8 100644
@@ -323,8 +323,10 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 		adc1 |= MC13783_ADC1_ATOX;
 
 	dev_dbg(mc13xxx->dev, "%s: request irq\n", __func__);
-	mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+	ret = mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
 			mc13xxx_handler_adcdone, __func__, &adcdone_data);
+	if (ret)
+		goto out;
 
 	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
 	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
Signature · 1 line
2.34.1
author maintainer
#643 lore raw

PATCH 643/1126 libbpf: Unmap rings when umem deleted

In reply to Greg Kroah-Hartman

From: lic121 <[email protected]>

[ Upstream commit 9c6e6a80ee741adf6cb3cfd8eef7d1554f91fceb ]

xsk_umem__create() does mmap for fill/comp rings, but xsk_umem__delete() doesn't do the unmap. This works fine for regular cases, because xsk_socket__delete() does unmap for the rings. But for the case that xsk_socket__create_shared() fails, umem rings are not unmapped.

fill_save/comp_save are checked to determine if rings have already be unmapped by xsk. If fill_save and comp_save are NULL, it means that the rings have already been used by xsk. Then they are supposed to be unmapped by xsk_socket__delete(). Otherwise, xsk_umem__delete() does the unmap.

Fixes 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
---
 tools/lib/bpf/xsk.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
tools/lib/bpf/xsk.c +11 -0
index edafe56664f3..32a2f5749c71 100644
@@ -1193,12 +1193,23 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
 
 int xsk_umem__delete(struct xsk_umem *umem)
 {
+	struct xdp_mmap_offsets off;
+	int err;
+
 	if (!umem)
 		return 0;
 
 	if (umem->refcount)
 		return -EBUSY;
 
+	err = xsk_get_mmap_offsets(umem->fd, &off);
+	if (!err && umem->fill_save && umem->comp_save) {
+		munmap(umem->fill_save->ring - off.fr.desc,
+		       off.fr.desc + umem->config.fill_size * sizeof(__u64));
+		munmap(umem->comp_save->ring - off.cr.desc,
+		       off.cr.desc + umem->config.comp_size * sizeof(__u64));
+	}
+
 	close(umem->fd);
 	free(umem);
 
Signature · 1 line
2.34.1
author maintainer
#644 lore raw

PATCH 644/1126 selftests/bpf: Make test_lwt_ip_encap more stable and faster

In reply to Greg Kroah-Hartman

From: Felix Maurer <[email protected]>

[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ]

In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to time. The failure occured when an IPv4 ping through the IPv6 GRE encapsulation did not receive a reply within the timeout. The IPv4 ping and the IPv6 ping in the test used different timeouts (1 sec for IPv4 and 6 sec for IPv6), probably taking into account that IPv6 might need longer to successfully complete. However, when IPv4 pings (with the short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6 apply.

The actual reason for the long delays with IPv6 was that the IPv6 neighbor discovery sometimes did not complete in time. This was caused by the outgoing interface only having a tentative link local address, i.e., not having completed DAD for that lladdr. The ND was successfully retried after 1 sec but that was too late for the ping timeout.

The IPv6 addresses for the test were already added with nodad. However, for the lladdrs, DAD was still performed. We now disable DAD in the test netns completely and just assume that the two lladdrs on each veth pair do not collide. This removes all the delays for IPv6 traffic in the test.

Without the delays, we can now also reduce the delay of the IPv6 ping to 1 sec. This makes the whole test complete faster because we don't need to wait for the excessive timeout for each IPv6 ping that is supposed to fail.

---
 tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
tools/testing/selftests/bpf/test_lwt_ip_encap.sh +9 -1
index b497bb85b667..6c69c42b1d60 100755
@@ -120,6 +120,14 @@ setup()
 	ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0
 	ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0
 
+	# disable IPv6 DAD because it sometimes takes too long and fails tests
+	ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0
+	ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0
+	ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
 	ip link add veth1 type veth peer name veth2
 	ip link add veth3 type veth peer name veth4
 	ip link add veth5 type veth peer name veth6
@@ -289,7 +297,7 @@ test_ping()
 		ip netns exec ${NS1} ping  -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null
 		RET=$?
 	elif [ "${PROTO}" == "IPv6" ] ; then
-		ip netns exec ${NS1} ping6 -c 1 -W 6 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
+		ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
 		RET=$?
 	else
 		echo "    test_ping: unknown PROTO: ${PROTO}"
Signature · 1 line
2.34.1
author maintainer
#645 lore raw

PATCH 645/1126 platform/x86: huawei-wmi: check the return value of device_create_file()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit c91a5b1c221a58d008485cf7d02ccce73108b119 ]

The function device_create_file() in huawei_wmi_battery_add() can fail, so its return value should be checked.

Fixes 355a070b09ab ("platform/x86: huawei-wmi: Add battery charging thresholds")
---
 drivers/platform/x86/huawei-wmi.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/platform/x86/huawei-wmi.c +10 -3
index a2d846c4a7ee..eac3e6b4ea11 100644
@@ -470,10 +470,17 @@ static DEVICE_ATTR_RW(charge_control_thresholds);
 
 static int huawei_wmi_battery_add(struct power_supply *battery)
 {
-	device_create_file(&battery->dev, &dev_attr_charge_control_start_threshold);
-	device_create_file(&battery->dev, &dev_attr_charge_control_end_threshold);
+	int err = 0;
 
-	return 0;
+	err = device_create_file(&battery->dev, &dev_attr_charge_control_start_threshold);
+	if (err)
+		return err;
+
+	err = device_create_file(&battery->dev, &dev_attr_charge_control_end_threshold);
+	if (err)
+		device_remove_file(&battery->dev, &dev_attr_charge_control_start_threshold);
+
+	return err;
 }
 
 static int huawei_wmi_battery_remove(struct power_supply *battery)
Signature · 1 line
2.34.1
author maintainer
#646 lore raw

PATCH 646/1126 scsi: mpt3sas: Fix incorrect 4GB boundary check

In reply to Greg Kroah-Hartman

From: Sreekanth Reddy <[email protected]>

[ Upstream commit 208cc9fe6f21112b5cc6cb87065fb8ab66e79316 ]

The driver must perform its 4GB boundary check using the pool's DMA address instead of using the virtual address.

Fixes d6adc251dd2f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region")
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)
drivers/scsi/mpt3sas/mpt3sas_base.c +12 -13
index 76229b839560..fb5a3a348dbe 100644
@@ -5736,14 +5736,13 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
  */
 
 static int
-mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz)
+mpt3sas_check_same_4gb_region(dma_addr_t start_address, u32 pool_sz)
 {
-	long reply_pool_end_address;
+	dma_addr_t end_address;
 
-	reply_pool_end_address = reply_pool_start_address + pool_sz;
+	end_address = start_address + pool_sz - 1;
 
-	if (upper_32_bits(reply_pool_start_address) ==
-		upper_32_bits(reply_pool_end_address))
+	if (upper_32_bits(start_address) == upper_32_bits(end_address))
 		return 1;
 	else
 		return 0;
@@ -5804,7 +5803,7 @@ _base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
 		}
 
 		if (!mpt3sas_check_same_4gb_region(
-		    (long)ioc->pcie_sg_lookup[i].pcie_sgl, sz)) {
+		    ioc->pcie_sg_lookup[i].pcie_sgl_dma, sz)) {
 			ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n",
 			    ioc->pcie_sg_lookup[i].pcie_sgl,
 			    (unsigned long long)
@@ -5859,8 +5858,8 @@ _base_allocate_chain_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
 			    GFP_KERNEL, &ctr->chain_buffer_dma);
 			if (!ctr->chain_buffer)
 				return -EAGAIN;
-			if (!mpt3sas_check_same_4gb_region((long)
-			    ctr->chain_buffer, ioc->chain_segment_sz)) {
+			if (!mpt3sas_check_same_4gb_region(
+			    ctr->chain_buffer_dma, ioc->chain_segment_sz)) {
 				ioc_err(ioc,
 				    "Chain buffers are not in same 4G !!! Chain buff (0x%p) dma = (0x%llx)\n",
 				    ctr->chain_buffer,
@@ -5896,7 +5895,7 @@ _base_allocate_sense_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
 	    GFP_KERNEL, &ioc->sense_dma);
 	if (!ioc->sense)
 		return -EAGAIN;
-	if (!mpt3sas_check_same_4gb_region((long)ioc->sense, sz)) {
+	if (!mpt3sas_check_same_4gb_region(ioc->sense_dma, sz)) {
 		dinitprintk(ioc, pr_err(
 		    "Bad Sense Pool! sense (0x%p) sense_dma = (0x%llx)\n",
 		    ioc->sense, (unsigned long long) ioc->sense_dma));
@@ -5929,7 +5928,7 @@ _base_allocate_reply_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
 	    &ioc->reply_dma);
 	if (!ioc->reply)
 		return -EAGAIN;
-	if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) {
+	if (!mpt3sas_check_same_4gb_region(ioc->reply_dma, sz)) {
 		dinitprintk(ioc, pr_err(
 		    "Bad Reply Pool! Reply (0x%p) Reply dma = (0x%llx)\n",
 		    ioc->reply, (unsigned long long) ioc->reply_dma));
@@ -5964,7 +5963,7 @@ _base_allocate_reply_free_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
 	    GFP_KERNEL, &ioc->reply_free_dma);
 	if (!ioc->reply_free)
 		return -EAGAIN;
-	if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) {
+	if (!mpt3sas_check_same_4gb_region(ioc->reply_free_dma, sz)) {
 		dinitprintk(ioc,
 		    pr_err("Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n",
 		    ioc->reply_free, (unsigned long long) ioc->reply_free_dma));
@@ -6003,7 +6002,7 @@ _base_allocate_reply_post_free_array(struct MPT3SAS_ADAPTER *ioc,
 	    GFP_KERNEL, &ioc->reply_post_free_array_dma);
 	if (!ioc->reply_post_free_array)
 		return -EAGAIN;
-	if (!mpt3sas_check_same_4gb_region((long)ioc->reply_post_free_array,
+	if (!mpt3sas_check_same_4gb_region(ioc->reply_post_free_array_dma,
 	    reply_post_free_array_sz)) {
 		dinitprintk(ioc, pr_err(
 		    "Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n",
@@ -6068,7 +6067,7 @@ base_alloc_rdpq_dma_pool(struct MPT3SAS_ADAPTER *ioc, int sz)
 			 * resources and set DMA mask to 32 and allocate.
 			 */
 			if (!mpt3sas_check_same_4gb_region(
-				(long)ioc->reply_post[i].reply_post_free, sz)) {
+				ioc->reply_post[i].reply_post_free_dma, sz)) {
 				dinitprintk(ioc,
 				    ioc_err(ioc, "bad Replypost free pool(0x%p)"
 				    "reply_post_free_dma = (0x%llx)\n",
Signature · 1 line
2.34.1
author maintainer
#647 lore raw

PATCH 647/1126 powerpc: 8xx: fix a return value error in mpc8xx_pic_init

In reply to Greg Kroah-Hartman

From: Hangyu Hua <[email protected]>

[ Upstream commit 3fd46e551f67f4303c3276a0d6cd20baf2d192c4 ]

mpc8xx_pic_init() should return -ENOMEM instead of 0 when irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue executing even if mpc8xx_pic_host is NULL.

Fixes cc76404feaed ("powerpc/8xx: Fix possible device node reference leak")
---
 arch/powerpc/platforms/8xx/pic.c | 1 +
 1 file changed, 1 insertion(+)
arch/powerpc/platforms/8xx/pic.c +1 -0
index f2ba837249d6..04a6abf14c29 100644
@@ -153,6 +153,7 @@ int __init mpc8xx_pic_init(void)
 	if (mpc8xx_pic_host == NULL) {
 		printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
 		ret = -ENOMEM;
+		goto out;
 	}
 
 	ret = 0;
Signature · 1 line
2.34.1
author maintainer
#648 lore raw

PATCH 648/1126 xtensa: add missing XCHAL_HAVE_WINDOWED check

In reply to Greg Kroah-Hartman

From: Max Filippov <[email protected]>

[ Upstream commit 8c9ab55c0fbdc76cb876140c2dad75a610bb23ef ]

Add missing preprocessor conditions to secondary reset vector code.

Fixes 09af39f649da ("xtensa: use register window specific opcodes only when present")
---
 arch/xtensa/kernel/mxhead.S | 2 ++
 1 file changed, 2 insertions(+)
arch/xtensa/kernel/mxhead.S +2 -0
index 9f3843742726..b702c0908b1f 100644
@@ -37,11 +37,13 @@ _SetupOCD:
 	 * xt-gdb to single step via DEBUG exceptions received directly
 	 * by ocd.
 	 */
+#if XCHAL_HAVE_WINDOWED
 	movi	a1, 1
 	movi	a0, 0
 	wsr	a1, windowstart
 	wsr	a0, windowbase
 	rsync
+#endif
 
 	movi	a1, LOCKLEVEL
 	wsr	a1, ps
Signature · 1 line
2.34.1
author maintainer
#649 lore raw

PATCH 649/1126 iwlwifi: pcie: fix SW error MSI-X mapping

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit 7b9f485091a5755f6e0a7dd3725f3b312768ecd0 ]

We need to also update the IVAR location, since we've shifted the bit.

---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/pcie/trans.c +1 -1
index ef14584fc0a1..4b08eb46617c 100644
@@ -1112,7 +1112,7 @@ static const struct iwl_causes_list causes_list_pre_bz[] = {
 };
 
 static const struct iwl_causes_list causes_list_bz[] = {
-	{MSIX_HW_INT_CAUSES_REG_SW_ERR_BZ,	CSR_MSIX_HW_INT_MASK_AD, 0x29},
+	{MSIX_HW_INT_CAUSES_REG_SW_ERR_BZ,	CSR_MSIX_HW_INT_MASK_AD, 0x15},
 };
 
 static void iwl_pcie_map_list(struct iwl_trans *trans,
Signature · 1 line
2.34.1
author maintainer
#650 lore raw

PATCH 650/1126 vxcan: enable local echo for sent CAN frames

In reply to Greg Kroah-Hartman

From: Oliver Hartkopp <[email protected]>

[ Upstream commit 259bdba27e32368b4404f69d613b1c1014c07cbf ]

The vxcan driver provides a pair of virtual CAN interfaces to exchange CAN traffic between different namespaces - analogue to veth.

In opposite to the vcan driver the local sent CAN traffic on this interface is not echo'ed back but only sent to the remote peer. This is unusual and can be easily fixed by removing IFF_ECHO from the netdevice flags that are set for vxcan interfaces by default at startup.

Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed in af_can.c in can_send(). This patch makes vxcan interfaces adopt the same local echo behavior and procedures as known from the vcan interfaces.

Fixes a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
---
 drivers/net/can/vxcan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/can/vxcan.c +1 -1
index 47ccc15a3486..191ffa7776e8 100644
@@ -148,7 +148,7 @@ static void vxcan_setup(struct net_device *dev)
 	dev->hard_header_len	= 0;
 	dev->addr_len		= 0;
 	dev->tx_queue_len	= 0;
-	dev->flags		= (IFF_NOARP|IFF_ECHO);
+	dev->flags		= IFF_NOARP;
 	dev->netdev_ops		= &vxcan_netdev_ops;
 	dev->needs_free_netdev	= true;
 
Signature · 1 line
2.34.1
author maintainer
#651 lore raw

PATCH 651/1126 ath10k: Fix error handling in ath10k_setup_msa_resources

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 9747a78d5f758a5284751a10aee13c30d02bd5f1 ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done.

This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

Fixes 727fec790ead ("ath10k: Setup the msa resources before qmi init")
---
 drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/snoc.c +1 -1
index 9513ab696fff..f79dd9a71690 100644
@@ -1556,11 +1556,11 @@ static int ath10k_setup_msa_resources(struct ath10k *ar, u32 msa_size)
 	node = of_parse_phandle(dev->of_node, "memory-region", 0);
 	if (node) {
 		ret = of_address_to_resource(node, 0, &r);
+		of_node_put(node);
 		if (ret) {
 			dev_err(dev, "failed to resolve msa fixed region\n");
 			return ret;
 		}
-		of_node_put(node);
 
 		ar->msa.paddr = r.start;
 		ar->msa.mem_size = resource_size(&r);
Signature · 1 line
2.34.1
author maintainer
#652 lore raw

PATCH 652/1126 mips: cdmm: Fix refcount leak in mips_cdmm_phys_base

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 4528668ca331f7ce5999b7746657b46db5b3b785 ]

The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount.

Fixes 2121aa3e2312 ("mips: cdmm: Add mti,mips-cdmm dtb node support")
---
 drivers/bus/mips_cdmm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/bus/mips_cdmm.c +1 -0
index 626dedd110cb..fca0d0669aa9 100644
@@ -351,6 +351,7 @@ phys_addr_t __weak mips_cdmm_phys_base(void)
 	np = of_find_compatible_node(NULL, NULL, "mti,mips-cdmm");
 	if (np) {
 		err = of_address_to_resource(np, 0, &res);
+		of_node_put(np);
 		if (!err)
 			return res.start;
 	}
Signature · 1 line
2.34.1
author maintainer
#653 lore raw

PATCH 653/1126 MIPS: RB532: fix return value of __setup handler

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 8755d57ba1ff910666572fab9e32890e8cc6ed3b ]

__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from setup_kmac().

Fixes 9e21c7e40b7e ("MIPS: RB532: Replace parse_mac_addr() with mac_pton().")
Fixes 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")

From: Igor Zhbanov <[email protected]>

Link lore.kernel.org/r/[email protected]
Cc Thomas Bogendoerfer <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc Phil Sutter <[email protected]>
Cc Florian Fainelli <[email protected]>
Cc Ralf Baechle <[email protected]>
Cc Daniel Walter <[email protected]>
---
 arch/mips/rb532/devices.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
arch/mips/rb532/devices.c +2 -4
index 04684990e28e..b7f6f782d9a1 100644
@@ -301,11 +301,9 @@ static int __init plat_setup_devices(void)
 static int __init setup_kmac(char *s)
 {
 	printk(KERN_INFO "korina mac = %s\n", s);
-	if (!mac_pton(s, korina_dev0_data.mac)) {
+	if (!mac_pton(s, korina_dev0_data.mac))
 		printk(KERN_ERR "Invalid mac\n");
-		return -EINVAL;
-	}
-	return 0;
+	return 1;
 }
 
 __setup("kmac=", setup_kmac);
Signature · 1 line
2.34.1
author maintainer
#654 lore raw

PATCH 654/1126 MIPS: pgalloc: fix memory leak caused by pgd_free()

In reply to Greg Kroah-Hartman

From: Yaliang Wang <[email protected]>

[ Upstream commit 2bc5bab9a763d520937e4f3fe8df51c6a1eceb97 ]

pgd page is freed by generic implementation pgd_free() since commit f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"), however, there are scenarios that the system uses more than one page as the pgd table, in such cases the generic implementation pgd_free() won't be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER" will be set as "1", which will cause allocating two pages as the pgd table. Well, at the same time, the generic implementation pgd_free() just free one pgd page, which will result in the memory leak.

The memory leak can be easily detected by executing shell command:
"while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"

Fixes f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()")
---
 arch/mips/include/asm/pgalloc.h | 6 ++++++
 1 file changed, 6 insertions(+)
arch/mips/include/asm/pgalloc.h +6 -0
index c7925d0e9874..867e9c3db76e 100644
@@ -15,6 +15,7 @@
 
 #define __HAVE_ARCH_PMD_ALLOC_ONE
 #define __HAVE_ARCH_PUD_ALLOC_ONE
+#define __HAVE_ARCH_PGD_FREE
 #include <asm-generic/pgalloc.h>
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
@@ -48,6 +49,11 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 extern void pgd_init(unsigned long page);
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
 #define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_pte_page_dtor(pte);			\
Signature · 1 line
2.34.1
author maintainer
#655 lore raw

PATCH 655/1126 mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init

In reply to Greg Kroah-Hartman

From: Xin Xiong <[email protected]>

[ Upstream commit fecbd4a317c95d73c849648c406bcf1b6a0ec1cf ]

The reference counting issue happens in several error handling paths on a refcounted object "nc->dmac". In these paths, the function simply returns the error code, forgetting to balance the reference count of "nc->dmac", increased earlier by dma_request_channel(), which may cause refcount leaks.

Fix it by decrementing the refcount of specific object in those error paths.

---
 drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/mtd/nand/raw/atmel/nand-controller.c +11 -3
index f3276ee9e4fe..ddd93bc38ea6 100644
@@ -2060,13 +2060,15 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
 	nc->mck = of_clk_get(dev->parent->of_node, 0);
 	if (IS_ERR(nc->mck)) {
 		dev_err(dev, "Failed to retrieve MCK clk\n");
-		return PTR_ERR(nc->mck);
+		ret = PTR_ERR(nc->mck);
+		goto out_release_dma;
 	}
 
 	np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0);
 	if (!np) {
 		dev_err(dev, "Missing or invalid atmel,smc property\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_release_dma;
 	}
 
 	nc->smc = syscon_node_to_regmap(np);
@@ -2074,10 +2076,16 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
 	if (IS_ERR(nc->smc)) {
 		ret = PTR_ERR(nc->smc);
 		dev_err(dev, "Could not get SMC regmap (err = %d)\n", ret);
-		return ret;
+		goto out_release_dma;
 	}
 
 	return 0;
+
+out_release_dma:
+	if (nc->dmac)
+		dma_release_channel(nc->dmac);
+
+	return ret;
 }
 
 static int
Signature · 1 line
2.34.1
author maintainer
#656 lore raw

PATCH 656/1126 power: ab8500_chargalg: Use CLOCK_MONOTONIC

In reply to Greg Kroah-Hartman

From: Linus Walleij <[email protected]>

[ Upstream commit c22fca40522e2be8af168f3087d87d85e404ea72 ]

The HRTimer in the AB8500 charging code is using CLOCK_REALTIME to set an alarm some hours forward in time +/- 5 min for a safety timer.

I have observed that this will sometimes fire sporadically early when charging a battery with the result that charging stops.

As CLOCK_REALTIME can be subject to adjustments of time from sources such as NTP, this cannot be trusted and will likely for example fire events if the clock is set forward some hours by say NTP.

Use CLOCK_MONOTONIC as indicated in other instances and the problem goes away. Also initialize the timer to REL mode as this is what will be used later.

Fixes 257107ae6b9b ("ab8500-chargalg: Use hrtimer")
Cc Lee Jones <[email protected]>
---
 drivers/power/supply/ab8500_chargalg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/power/supply/ab8500_chargalg.c +2 -2
index bcf85ae6828e..da490e090ce4 100644
@@ -2020,11 +2020,11 @@ static int ab8500_chargalg_probe(struct platform_device *pdev)
 	psy_cfg.drv_data = di;
 
 	/* Initilialize safety timer */
-	hrtimer_init(&di->safety_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	hrtimer_init(&di->safety_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	di->safety_timer.function = ab8500_chargalg_safety_timer_expired;
 
 	/* Initilialize maintenance timer */
-	hrtimer_init(&di->maintenance_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	hrtimer_init(&di->maintenance_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	di->maintenance_timer.function =
 		ab8500_chargalg_maintenance_timer_expired;
 
Signature · 1 line
2.34.1
author maintainer
#657 lore raw

PATCH 657/1126 RDMA/irdma: Prevent some integer underflows

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 6f6dbb819dfc1a35bcb8b709b5c83a3ea8beff75 ]

My static checker complains that:

    drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init()
    warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'?

It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could be zero. Even if we trust the firmware, it's easy enough to change the condition just as a hardenning measure.

---
 drivers/infiniband/hw/irdma/ctrl.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/infiniband/hw/irdma/ctrl.c +5 -5
index 3141a9c85de5..e7554b6043e4 100644
@@ -433,7 +433,7 @@ enum irdma_status_code irdma_sc_qp_create(struct irdma_sc_qp *qp, struct irdma_c
 
 	cqp = qp->dev->cqp;
 	if (qp->qp_uk.qp_id < cqp->dev->hw_attrs.min_hw_qp_id ||
-	    qp->qp_uk.qp_id > (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_QP].max_cnt - 1))
+	    qp->qp_uk.qp_id >= (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_QP].max_cnt))
 		return IRDMA_ERR_INVALID_QP_ID;
 
 	wqe = irdma_sc_cqp_get_next_send_wqe(cqp, scratch);
@@ -2512,10 +2512,10 @@ static enum irdma_status_code irdma_sc_cq_create(struct irdma_sc_cq *cq,
 	enum irdma_status_code ret_code = 0;
 
 	cqp = cq->dev->cqp;
-	if (cq->cq_uk.cq_id > (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_CQ].max_cnt - 1))
+	if (cq->cq_uk.cq_id >= (cqp->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_CQ].max_cnt))
 		return IRDMA_ERR_INVALID_CQ_ID;
 
-	if (cq->ceq_id > (cq->dev->hmc_fpm_misc.max_ceqs - 1))
+	if (cq->ceq_id >= (cq->dev->hmc_fpm_misc.max_ceqs))
 		return IRDMA_ERR_INVALID_CEQ_ID;
 
 	ceq = cq->dev->ceq[cq->ceq_id];
@@ -3617,7 +3617,7 @@ enum irdma_status_code irdma_sc_ceq_init(struct irdma_sc_ceq *ceq,
 	    info->elem_cnt > info->dev->hw_attrs.max_hw_ceq_size)
 		return IRDMA_ERR_INVALID_SIZE;
 
-	if (info->ceq_id > (info->dev->hmc_fpm_misc.max_ceqs - 1))
+	if (info->ceq_id >= (info->dev->hmc_fpm_misc.max_ceqs))
 		return IRDMA_ERR_INVALID_CEQ_ID;
 	pble_obj_cnt = info->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_PBLE].cnt;
 
@@ -4166,7 +4166,7 @@ enum irdma_status_code irdma_sc_ccq_init(struct irdma_sc_cq *cq,
 	    info->num_elem > info->dev->hw_attrs.uk_attrs.max_hw_cq_size)
 		return IRDMA_ERR_INVALID_SIZE;
 
-	if (info->ceq_id > (info->dev->hmc_fpm_misc.max_ceqs - 1))
+	if (info->ceq_id >= (info->dev->hmc_fpm_misc.max_ceqs ))
 		return IRDMA_ERR_INVALID_CEQ_ID;
 
 	pble_obj_cnt = info->dev->hmc_info->hmc_obj[IRDMA_HMC_IW_PBLE].cnt;
Signature · 1 line
2.34.1
author maintainer
#658 lore raw

PATCH 658/1126 Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit 7922d3de4d270a9aedb71212fc0d5ae697ced516 ]

This reverts commit 7c4a539ec38f4ce400a0f3fcb5ff6c940fcd67bb. which causes to the following error in mlx4.

Destroy of kernel CQ shouldn't fail

  WARNING: CPU: 4 PID: 18064 at include/rdma/ib_verbs.h:3936 mlx4_ib_dealloc_xrcd+0x12e/0x1b0 [mlx4_ib]
  Modules linked in: bonding ib_ipoib ip_gre ipip tunnel4 geneve rdma_ucm nf_tables ib_umad mlx4_en mlx4_ib ib_uverbs mlx4_core ip6_gre gre ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay fuse [last unloaded: mlx4_core]
  CPU: 4 PID: 18064 Comm: ibv_xsrq_pingpo Not tainted 5.17.0-rc7_master_62c6ecb #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  RIP: 0010:mlx4_ib_dealloc_xrcd+0x12e/0x1b0 [mlx4_ib]
  Code: 1e 93 08 00 40 80 fd 01 0f 87 fa f1 04 00 83 e5 01 0f 85 2b ff ff ff 48 c7 c7 20 4f b6 a0 c6 05 fd 92 08 00 01 e8 47 c9 82 e2 <0f> 0b e9 11 ff ff ff 0f b6 2d eb 92 08 00 40 80 fd 01 0f 87 b1 f1
  RSP: 0018:ffff8881a4957750 EFLAGS: 00010286
  RAX: 0000000000000000 RBX: ffff8881ac4b6800 RCX: 0000000000000000
  RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed103492aedc
  RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2e378eb
  R10: ffffed109a5c6f1d R11: 0000000000000001 R12: ffff888132620000
  R13: ffff8881a4957a90 R14: ffff8881aa2d4000 R15: ffff8881a4957ad0
  FS:  00007f0401747740(0000) GS:ffff8884d2e00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000055f8ae036118 CR3: 000000012fe94005 CR4: 0000000000370ea0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <TASK>
   ib_dealloc_xrcd_user+0xce/0x120 [ib_core]
   ib_uverbs_dealloc_xrcd+0xad/0x210 [ib_uverbs]
   uverbs_free_xrcd+0xe8/0x190 [ib_uverbs]
   destroy_hw_idr_uobject+0x7a/0x130 [ib_uverbs]
   uverbs_destroy_uobject+0x164/0x730 [ib_uverbs]
   uobj_destroy+0x72/0xf0 [ib_uverbs]
   ib_uverbs_cmd_verbs+0x19fb/0x3110 [ib_uverbs]
   ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
   __x64_sys_ioctl+0x856/0x1550
   do_syscall_64+0x3d/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae
---
 drivers/infiniband/core/uverbs_cmd.c          | 1 +
 drivers/infiniband/core/uverbs_std_types_qp.c | 1 +
 drivers/infiniband/core/verbs.c               | 3 ++-
 3 files changed, 4 insertions(+), 1 deletion(-)
drivers/infiniband/core/uverbs_cmd.c +1 -0
index 4437f834c0a7..6b6393176b3c 100644
@@ -1437,6 +1437,7 @@ static int create_qp(struct uverbs_attr_bundle *attrs,
 		ret = PTR_ERR(qp);
 		goto err_put;
 	}
+	ib_qp_usecnt_inc(qp);
 
 	obj->uevent.uobject.object = qp;
 	obj->uevent.event_file = READ_ONCE(attrs->ufile->default_async_file);
drivers/infiniband/core/uverbs_std_types_qp.c +1 -0
index 75353e09c6fe..dd1075466f61 100644
@@ -254,6 +254,7 @@ static int UVERBS_HANDLER(UVERBS_METHOD_QP_CREATE)(
 		ret = PTR_ERR(qp);
 		goto err_put;
 	}
+	ib_qp_usecnt_inc(qp);
 
 	if (attr.qp_type == IB_QPT_XRC_TGT) {
 		obj->uxrcd = container_of(xrcd_uobj, struct ib_uxrcd_object,
drivers/infiniband/core/verbs.c +2 -1
index 961055eb330d..e821dc94a43e 100644
@@ -1253,7 +1253,6 @@ static struct ib_qp *create_qp(struct ib_device *dev, struct ib_pd *pd,
 	if (ret)
 		goto err_security;
 
-	ib_qp_usecnt_inc(qp);
 	rdma_restrack_add(&qp->res);
 	return qp;
 
@@ -1354,6 +1353,8 @@ struct ib_qp *ib_create_qp_kernel(struct ib_pd *pd,
 	if (IS_ERR(qp))
 		return qp;
 
+	ib_qp_usecnt_inc(qp);
+
 	if (qp_init_attr->cap.max_rdma_ctxs) {
 		ret = rdma_rw_init_mrs(qp, qp_init_attr);
 		if (ret)
Signature · 1 line
2.34.1
author maintainer
#659 lore raw

PATCH 659/1126 RDMA/mlx5: Fix memory leak in error flow for subscribe event routine

In reply to Greg Kroah-Hartman

From: Yongzhi Liu <[email protected]>

[ Upstream commit 087f9c3f2309ed183f7e4b85ae57121d8663224d ]

In case the second xa_insert() fails, the obj_event is not released. Fix the error unwind flow to free that memory to avoid a memory leak.

Fixes 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX")
---
 drivers/infiniband/hw/mlx5/devx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/infiniband/hw/mlx5/devx.c +3 -1
index 08b7f6bc56c3..15c0884d1f49 100644
@@ -1886,8 +1886,10 @@ subscribe_event_xa_alloc(struct mlx5_devx_event_table *devx_event_table,
 				key_level2,
 				obj_event,
 				GFP_KERNEL);
-		if (err)
+		if (err) {
+			kfree(obj_event);
 			return err;
+		}
 		INIT_LIST_HEAD(&obj_event->obj_sub_list);
 	}
 
Signature · 1 line
2.34.1
author maintainer
#660 lore raw

PATCH 660/1126 bpf, sockmap: Fix memleak in sk_psock_queue_msg

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 938d3480b92fa5e454b7734294f12a7b75126f09 ]

If tcp_bpf_sendmsg is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it.

sk1 (redirect sk2) sk2
------------------- ---------------
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
tcp_bpf_sendmsg_redir()
bpf_tcp_ingress()

                                          sock_map_close()
                                           lock_sock()
    lock_sock() ... blocking
                                           sk_psock_stop
                                            sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
                                           release_sock(sk);
    lock_sock()
    sk_mem_charge()
    get_page()
    sk_psock_queue_msg()
     sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED);
      drop_sk_msg()
    release_sock()

While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge and has sg pages need to put. To fix we use sk_msg_free() and then kfee() msg.

This issue can cause the following info:

WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0
Call Trace:
 <IRQ>
 inet_csk_destroy_sock+0x55/0x110
 tcp_rcv_state_process+0xe5f/0xe90
 ? sk_filter_trim_cap+0x10d/0x230
 ? tcp_v4_do_rcv+0x161/0x250
 tcp_v4_do_rcv+0x161/0x250
 tcp_v4_rcv+0xc3a/0xce0
 ip_protocol_deliver_rcu+0x3d/0x230
 ip_local_deliver_finish+0x54/0x60
 ip_local_deliver+0xfd/0x110
 ? ip_protocol_deliver_rcu+0x230/0x230
 ip_rcv+0xd6/0x100
 ? ip_local_deliver+0x110/0x110
 __netif_receive_skb_one_core+0x85/0xa0
 process_backlog+0xa4/0x160
 __napi_poll+0x29/0x1b0
 net_rx_action+0x287/0x300
 __do_softirq+0xff/0x2fc
 do_softirq+0x79/0x90
 </IRQ>

WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 ? process_one_work+0x3c0/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>
Fixes 9635720b7c88 ("bpf, sockmap: Fix memleak on ingress msg enqueue")
---
 include/linux/skmsg.h | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
include/linux/skmsg.h +4 -9
index 18a717fe62eb..7f32dd59e751 100644
@@ -310,21 +310,16 @@ static inline void sock_drop(struct sock *sk, struct sk_buff *skb)
 	kfree_skb(skb);
 }
 
-static inline void drop_sk_msg(struct sk_psock *psock, struct sk_msg *msg)
-{
-	if (msg->skb)
-		sock_drop(psock->sk, msg->skb);
-	kfree(msg);
-}
-
 static inline void sk_psock_queue_msg(struct sk_psock *psock,
 				      struct sk_msg *msg)
 {
 	spin_lock_bh(&psock->ingress_lock);
 	if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))
 		list_add_tail(&msg->list, &psock->ingress_msg);
-	else
-		drop_sk_msg(psock, msg);
+	else {
+		sk_msg_free(psock->sk, msg);
+		kfree(msg);
+	}
 	spin_unlock_bh(&psock->ingress_lock);
 }
 
Signature · 1 line
2.34.1
author maintainer
#661 lore raw

PATCH 661/1126 bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 9c34e38c4a870eb30b13f42f5b44f42e9d19ccb8 ]

If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc() returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is greater than osize after sk_msg_alloc(), memleak occurs. To fix we use sk_msg_trim() to release the allocated memory, then goto wait for memory.

Other call paths of sk_msg_alloc() have the similar issue, such as tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(), as Cong Wang suggested.

This issue can cause the following info:

WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 kthread+0xe6/0x110
 ret_from_fork+0x22/0x30
 </TASK>
Fixes 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
---
 net/core/skmsg.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
net/core/skmsg.c +13 -4
index 929a2b096b04..cc381165ea08 100644
@@ -27,6 +27,7 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
 		 int elem_first_coalesce)
 {
 	struct page_frag *pfrag = sk_page_frag(sk);
+	u32 osize = msg->sg.size;
 	int ret = 0;
 
 	len -= msg->sg.size;
@@ -35,13 +36,17 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
 		u32 orig_offset;
 		int use, i;
 
-		if (!sk_page_frag_refill(sk, pfrag))
-			return -ENOMEM;
+		if (!sk_page_frag_refill(sk, pfrag)) {
+			ret = -ENOMEM;
+			goto msg_trim;
+		}
 
 		orig_offset = pfrag->offset;
 		use = min_t(int, len, pfrag->size - orig_offset);
-		if (!sk_wmem_schedule(sk, use))
-			return -ENOMEM;
+		if (!sk_wmem_schedule(sk, use)) {
+			ret = -ENOMEM;
+			goto msg_trim;
+		}
 
 		i = msg->sg.end;
 		sk_msg_iter_var_prev(i);
@@ -71,6 +76,10 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
 	}
 
 	return ret;
+
+msg_trim:
+	sk_msg_trim(sk, msg, osize);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(sk_msg_alloc);
 
Signature · 1 line
2.34.1
author maintainer
#662 lore raw

PATCH 662/1126 bpf, sockmap: Fix more uncharged while msg has more_data

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 84472b436e760ba439e1969a9e3c5ae7c86de39d ]

In tcp_bpf_send_verdict(), if msg has more data after tcp_bpf_sendmsg_redir():

tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc

The msg->sg.size(11000) has been uncharged twice, to fix we can charge the remaining msg->sg.size before goto more data.

This issue can cause the following info:

WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 ? vfs_write+0x237/0x290
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>
Fixes 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
---
 net/ipv4/tcp_bpf.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/ipv4/tcp_bpf.c +5 -2
index 9b9b02052fd3..304800c60427 100644
@@ -335,7 +335,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
 			cork = true;
 			psock->cork = NULL;
 		}
-		sk_msg_return(sk, msg, tosend);
+		sk_msg_return(sk, msg, msg->sg.size);
 		release_sock(sk);
 
 		ret = tcp_bpf_sendmsg_redir(sk_redir, msg, tosend, flags);
@@ -375,8 +375,11 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
 		}
 		if (msg &&
 		    msg->sg.data[msg->sg.start].page_link &&
-		    msg->sg.data[msg->sg.start].length)
+		    msg->sg.data[msg->sg.start].length) {
+			if (eval == __SK_REDIRECT)
+				sk_mem_charge(sk, msg->sg.size);
 			goto more_data;
+		}
 	}
 	return ret;
 }
Signature · 1 line
2.34.1
author maintainer
#663 lore raw

PATCH 663/1126 bpf, sockmap: Fix double uncharge the mem of sk_msg

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 2486ab434b2c2a14e9237296db00b1e1b7ae3273 ]

If tcp_bpf_sendmsg is running during a tear down operation, psock may be freed.

tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
sk_msg_return()
tcp_bpf_sendmsg_redir()
unlikely(!psock))

     sk_msg_free()

The mem of msg has been uncharged in tcp_bpf_send_verdict() by sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock is null, we can simply returning an error code, this would then trigger the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have the side effect of throwing an error up to user space. This would be a slight change in behavior from user side but would look the same as an error if the redirect on the socket threw an error.

This issue can cause the following info:

WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>
Fixes 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
---
 net/ipv4/tcp_bpf.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
net/ipv4/tcp_bpf.c +3 -4
index 304800c60427..1cdcb4df0eb7 100644
@@ -138,10 +138,9 @@ int tcp_bpf_sendmsg_redir(struct sock *sk, struct sk_msg *msg,
 	struct sk_psock *psock = sk_psock_get(sk);
 	int ret;
 
-	if (unlikely(!psock)) {
-		sk_msg_free(sk, msg);
-		return 0;
-	}
+	if (unlikely(!psock))
+		return -EPIPE;
+
 	ret = ingress ? bpf_tcp_ingress(sk, psock, msg, bytes, flags) :
 			tcp_bpf_push_locked(sk, msg, bytes, flags, false);
 	sk_psock_put(sk, psock);
Signature · 1 line
2.34.1
author maintainer
#664 lore raw

PATCH 664/1126 samples/bpf, xdpsock: Fix race when running for fix duration of time

In reply to Greg Kroah-Hartman

From: Niklas Söderlund <[email protected]>

[ Upstream commit 8fa42d78f6354bb96ad3a079dcbef528ca9fa9e0 ]

When running xdpsock for a fix duration of time before terminating using --duration=<n>, there is a race condition that may cause xdpsock to terminate immediately.

When running for a fixed duration of time the check to determine when to terminate execution is in is_benchmark_done() and is being executed in the context of the poller thread,

    if (opt_duration > 0) {
            unsigned long dt = (get_nsecs() - start_time);

            if (dt >= opt_duration)
                    benchmark_done = true;
    }

However start_time is only set after the poller thread have been created. This leaves a small window when the poller thread is starting and calls is_benchmark_done() for the first time that start_time is not yet set. In that case start_time have its initial value of 0 and the duration check fails as it do not correlate correctly for the applications start time and immediately sets benchmark_done which in turn terminates the xdpsock application.

Fix this by setting start_time before creating the poller thread.

Fixes d3f11b018f6c ("samples/bpf: xdpsock: Add duration option to specify how long to run")
---
 samples/bpf/xdpsock_user.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
samples/bpf/xdpsock_user.c +3 -3
index aa50864e4415..9f3446af50ce 100644
@@ -1984,15 +1984,15 @@ int main(int argc, char **argv)
 
 	setlocale(LC_ALL, "");
 
+	prev_time = get_nsecs();
+	start_time = prev_time;
+
 	if (!opt_quiet) {
 		ret = pthread_create(&pt, NULL, poller, NULL);
 		if (ret)
 			exit_with_error(ret);
 	}
 
-	prev_time = get_nsecs();
-	start_time = prev_time;
-
 	/* Configure sched priority for better wake-up accuracy */
 	memset(&schparam, 0, sizeof(schparam));
 	schparam.sched_priority = opt_schprio;
Signature · 1 line
2.34.1
author maintainer
#665 lore raw

PATCH 665/1126 USB: storage: ums-realtek: fix error code in rts51x_read_mem()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit b07cabb8361dc692522538205552b1b9dab134be ]

The rts51x_read_mem() function should return negative error codes. Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3) which is treated as success by the callers.

---
 drivers/usb/storage/realtek_cr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/storage/realtek_cr.c +1 -1
index 3789698d9d3c..0c423916d7bf 100644
@@ -365,7 +365,7 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 
 	buf = kmalloc(len, GFP_NOIO);
 	if (buf == NULL)
-		return USB_STOR_TRANSPORT_ERROR;
+		return -ENOMEM;
 
 	usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
 
Signature · 1 line
2.34.1
author maintainer
#666 lore raw

PATCH 666/1126 drm/amd/display: Fix double free during GPU reset on DC streams

In reply to Greg Kroah-Hartman

From: Nicholas Kazlauskas <[email protected]>

[ Upstream commit 32685b32d825ca08c5dec826477332df886c4743 ]

[Why]
The issue only occurs during the GPU reset code path.

We first backup the current state prior to commiting 0 streams internally from DM to DC. This state backup contains valid link encoder assignments.

DC will clear the link encoder assignments as part of current state (but not the backup, since it was a copied before the commit) and free the extra stream reference it held.

DC requires that the link encoder assignments remain cleared/invalid prior to commiting. Since the backup still has valid assignments we call the interface post reset to clear them. This routine also releases the extra reference that the link encoder interface held - resulting in a double free (and eventually a NULL pointer dereference).

[How]
We'll have to do a full DC commit anyway after GPU reset because the stream count previously went to 0.

We don't need to retain the assignment that we had backed up, so just copy off of the now clean current state assignment after the reset has occcurred with the new link_enc_cfg_copy() interface.

Fixes 6d63fcc2a334 ("drm/amd/display: Reset link encoder assignments for GPU reset")
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c     | 9 ++++++---
 drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c | 7 +++++++
 drivers/gpu/drm/amd/display/dc/inc/link_enc_cfg.h     | 5 +++++
 3 files changed, 18 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +6 -3
index eae9f9e26f0e..b28b5c490860 100644
@@ -2613,10 +2613,13 @@ static int dm_resume(void *handle)
 		 * before the 0 streams commit.
 		 *
 		 * DC expects that link encoder assignments are *not* valid
-		 * when committing a state, so as a workaround it needs to be
-		 * cleared here.
+		 * when committing a state, so as a workaround we can copy
+		 * off of the current state.
+		 *
+		 * We lose the previous assignments, but we had already
+		 * commit 0 streams anyway.
 		 */
-		link_enc_cfg_init(dm->dc, dc_state);
+		link_enc_cfg_copy(adev->dm.dc->current_state, dc_state);
 
 		if (dc_enable_dmub_notifications(adev->dm.dc))
 			amdgpu_dm_outbox_init(adev);
drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c +7 -0
index 00f72f66a7ef..72a3fded7142 100644
@@ -272,6 +272,13 @@ void link_enc_cfg_init(
 	state->res_ctx.link_enc_cfg_ctx.mode = LINK_ENC_CFG_STEADY;
 }
 
+void link_enc_cfg_copy(const struct dc_state *src_ctx, struct dc_state *dst_ctx)
+{
+	memcpy(&dst_ctx->res_ctx.link_enc_cfg_ctx,
+	       &src_ctx->res_ctx.link_enc_cfg_ctx,
+	       sizeof(dst_ctx->res_ctx.link_enc_cfg_ctx));
+}
+
 void link_enc_cfg_link_encs_assign(
 		struct dc *dc,
 		struct dc_state *state,
drivers/gpu/drm/amd/display/dc/inc/link_enc_cfg.h +5 -0
index a4e43b4826e0..59ceb9ed385d 100644
@@ -39,6 +39,11 @@ void link_enc_cfg_init(
 		const struct dc *dc,
 		struct dc_state *state);
 
+/*
+ * Copies a link encoder assignment from another state.
+ */
+void link_enc_cfg_copy(const struct dc_state *src_ctx, struct dc_state *dst_ctx);
+
 /*
  * Algorithm for assigning available DIG link encoders to streams.
  *
Signature · 1 line
2.34.1
author maintainer
#667 lore raw

PATCH 667/1126 RDMA/rxe: Change variable and function argument to proper type

In reply to Greg Kroah-Hartman

From: Chengguang Xu <[email protected]>

[ Upstream commit 7e8e611d6a0ff228577b1167335ffefb0f44d5d8 ]

The type of wqe length is u32 so in order to avoid overflow and shadow casting change variable and relevant function argument to proper type.

---
 drivers/infiniband/sw/rxe/rxe_req.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/infiniband/sw/rxe/rxe_req.c +5 -5
index 5eb89052dd66..b28036a7a3b8 100644
@@ -359,7 +359,7 @@ static inline int get_mtu(struct rxe_qp *qp)
 
 static struct sk_buff *init_req_packet(struct rxe_qp *qp,
 				       struct rxe_send_wqe *wqe,
-				       int opcode, int payload,
+				       int opcode, u32 payload,
 				       struct rxe_pkt_info *pkt)
 {
 	struct rxe_dev		*rxe = to_rdev(qp->ibqp.device);
@@ -449,7 +449,7 @@ static struct sk_buff *init_req_packet(struct rxe_qp *qp,
 
 static int finish_packet(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
 		       struct rxe_pkt_info *pkt, struct sk_buff *skb,
-		       int paylen)
+		       u32 paylen)
 {
 	int err;
 
@@ -497,7 +497,7 @@ static void update_wqe_state(struct rxe_qp *qp,
 static void update_wqe_psn(struct rxe_qp *qp,
 			   struct rxe_send_wqe *wqe,
 			   struct rxe_pkt_info *pkt,
-			   int payload)
+			   u32 payload)
 {
 	/* number of packets left to send including current one */
 	int num_pkt = (wqe->dma.resid + payload + qp->mtu - 1) / qp->mtu;
@@ -540,7 +540,7 @@ static void rollback_state(struct rxe_send_wqe *wqe,
 }
 
 static void update_state(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
-			 struct rxe_pkt_info *pkt, int payload)
+			 struct rxe_pkt_info *pkt, u32 payload)
 {
 	qp->req.opcode = pkt->opcode;
 
@@ -612,7 +612,7 @@ int rxe_requester(void *arg)
 	struct sk_buff *skb;
 	struct rxe_send_wqe *wqe;
 	enum rxe_hdr_mask mask;
-	int payload;
+	u32 payload;
 	int mtu;
 	int opcode;
 	int ret;
Signature · 1 line
2.34.1
author maintainer
#668 lore raw

PATCH 668/1126 RDMA/rxe: Fix ref error in rxe_av.c

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit 63221acb0c63141cc7650f8eefb148337061e6db ]

The commit referenced below can take a reference to the AH which is never dropped. This only happens in the UD request path. This patch optionally passes that AH back to the caller so that it can hold the reference while the AV is being accessed and then drop it. Code to do this is added to rxe_req.c. The AV is also passed to rxe_prepare in rxe_net.c as an optimization.

Fixes e2fe06c90806 ("RDMA/rxe: Lookup kernel AH from ah index in UD WQEs")
---
 drivers/infiniband/sw/rxe/rxe_av.c   | 19 +++++++++-
 drivers/infiniband/sw/rxe/rxe_loc.h  |  5 ++-
 drivers/infiniband/sw/rxe/rxe_net.c  | 17 +++++----
 drivers/infiniband/sw/rxe/rxe_req.c  | 55 +++++++++++++++++-----------
 drivers/infiniband/sw/rxe/rxe_resp.c |  2 +-
 5 files changed, 63 insertions(+), 35 deletions(-)
drivers/infiniband/sw/rxe/rxe_av.c +17 -2
index 38c7b6fb39d7..360a567159fe 100644
@@ -99,11 +99,14 @@ void rxe_av_fill_ip_info(struct rxe_av *av, struct rdma_ah_attr *attr)
 	av->network_type = type;
 }
 
-struct rxe_av *rxe_get_av(struct rxe_pkt_info *pkt)
+struct rxe_av *rxe_get_av(struct rxe_pkt_info *pkt, struct rxe_ah **ahp)
 {
 	struct rxe_ah *ah;
 	u32 ah_num;
 
+	if (ahp)
+		*ahp = NULL;
+
 	if (!pkt || !pkt->qp)
 		return NULL;
 
@@ -117,10 +120,22 @@ struct rxe_av *rxe_get_av(struct rxe_pkt_info *pkt)
 	if (ah_num) {
 		/* only new user provider or kernel client */
 		ah = rxe_pool_get_index(&pkt->rxe->ah_pool, ah_num);
-		if (!ah || ah->ah_num != ah_num || rxe_ah_pd(ah) != pkt->qp->pd) {
+		if (!ah) {
 			pr_warn("Unable to find AH matching ah_num\n");
 			return NULL;
 		}
+
+		if (rxe_ah_pd(ah) != pkt->qp->pd) {
+			pr_warn("PDs don't match for AH and QP\n");
+			rxe_drop_ref(ah);
+			return NULL;
+		}
+
+		if (ahp)
+			*ahp = ah;
+		else
+			rxe_drop_ref(ah);
+
 		return &ah->av;
 	}
 
drivers/infiniband/sw/rxe/rxe_loc.h +3 -2
index b1e174afb1d4..b92bb7a15290 100644
@@ -19,7 +19,7 @@ void rxe_av_to_attr(struct rxe_av *av, struct rdma_ah_attr *attr);
 
 void rxe_av_fill_ip_info(struct rxe_av *av, struct rdma_ah_attr *attr);
 
-struct rxe_av *rxe_get_av(struct rxe_pkt_info *pkt);
+struct rxe_av *rxe_get_av(struct rxe_pkt_info *pkt, struct rxe_ah **ahp);
 
 /* rxe_cq.c */
 int rxe_cq_chk_attr(struct rxe_dev *rxe, struct rxe_cq *cq,
@@ -102,7 +102,8 @@ void rxe_mw_cleanup(struct rxe_pool_elem *arg);
 /* rxe_net.c */
 struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,
 				int paylen, struct rxe_pkt_info *pkt);
-int rxe_prepare(struct rxe_pkt_info *pkt, struct sk_buff *skb);
+int rxe_prepare(struct rxe_av *av, struct rxe_pkt_info *pkt,
+		struct sk_buff *skb);
 int rxe_xmit_packet(struct rxe_qp *qp, struct rxe_pkt_info *pkt,
 		    struct sk_buff *skb);
 const char *rxe_parent_name(struct rxe_dev *rxe, unsigned int port_num);
drivers/infiniband/sw/rxe/rxe_net.c +9 -8
index be72bdbfb4ba..580cfd742dd2 100644
@@ -289,13 +289,13 @@ static void prepare_ipv6_hdr(struct dst_entry *dst, struct sk_buff *skb,
 	ip6h->payload_len = htons(skb->len - sizeof(*ip6h));
 }
 
-static int prepare4(struct rxe_pkt_info *pkt, struct sk_buff *skb)
+static int prepare4(struct rxe_av *av, struct rxe_pkt_info *pkt,
+		    struct sk_buff *skb)
 {
 	struct rxe_qp *qp = pkt->qp;
 	struct dst_entry *dst;
 	bool xnet = false;
 	__be16 df = htons(IP_DF);
-	struct rxe_av *av = rxe_get_av(pkt);
 	struct in_addr *saddr = &av->sgid_addr._sockaddr_in.sin_addr;
 	struct in_addr *daddr = &av->dgid_addr._sockaddr_in.sin_addr;
 
@@ -315,11 +315,11 @@ static int prepare4(struct rxe_pkt_info *pkt, struct sk_buff *skb)
 	return 0;
 }
 
-static int prepare6(struct rxe_pkt_info *pkt, struct sk_buff *skb)
+static int prepare6(struct rxe_av *av, struct rxe_pkt_info *pkt,
+		    struct sk_buff *skb)
 {
 	struct rxe_qp *qp = pkt->qp;
 	struct dst_entry *dst;
-	struct rxe_av *av = rxe_get_av(pkt);
 	struct in6_addr *saddr = &av->sgid_addr._sockaddr_in6.sin6_addr;
 	struct in6_addr *daddr = &av->dgid_addr._sockaddr_in6.sin6_addr;
 
@@ -340,16 +340,17 @@ static int prepare6(struct rxe_pkt_info *pkt, struct sk_buff *skb)
 	return 0;
 }
 
-int rxe_prepare(struct rxe_pkt_info *pkt, struct sk_buff *skb)
+int rxe_prepare(struct rxe_av *av, struct rxe_pkt_info *pkt,
+		struct sk_buff *skb)
 {
 	int err = 0;
 
 	if (skb->protocol == htons(ETH_P_IP))
-		err = prepare4(pkt, skb);
+		err = prepare4(av, pkt, skb);
 	else if (skb->protocol == htons(ETH_P_IPV6))
-		err = prepare6(pkt, skb);
+		err = prepare6(av, pkt, skb);
 
-	if (ether_addr_equal(skb->dev->dev_addr, rxe_get_av(pkt)->dmac))
+	if (ether_addr_equal(skb->dev->dev_addr, av->dmac))
 		pkt->mask |= RXE_LOOPBACK_MASK;
 
 	return err;
drivers/infiniband/sw/rxe/rxe_req.c +33 -22

121 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_resp.c +1 -1
index 380934e38923..192cb9a096a1 100644
@@ -632,7 +632,7 @@ static struct sk_buff *prepare_ack_packet(struct rxe_qp *qp,
 	if (ack->mask & RXE_ATMACK_MASK)
 		atmack_set_orig(ack, qp->resp.atomic_orig);
 
-	err = rxe_prepare(ack, skb);
+	err = rxe_prepare(&qp->pri_av, ack, skb);
 	if (err) {
 		kfree_skb(skb);
 		return NULL;
Signature · 1 line
2.34.1
author maintainer
#669 lore raw

PATCH 669/1126 powerpc/xive: fix return value of __setup handler

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit d64e3eab75a8e1e900c0fda2410a2df8893d8f85 ]

__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled.

A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings.

Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from xive_off() and xive_store_eoi_cmdline().

Fixes 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Fixes c21ee04f11ae ("powerpc/xive: Add a kernel parameter for StoreEOI")
[lore.kernel.org/r/[email protected]]
---
 arch/powerpc/sysdev/xive/common.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/sysdev/xive/common.c +3 -3
index 1ca5564bda9d..89c86f32aff8 100644
@@ -1708,20 +1708,20 @@ __be32 *xive_queue_page_alloc(unsigned int cpu, u32 queue_shift)
 static int __init xive_off(char *arg)
 {
 	xive_cmdline_disabled = true;
-	return 0;
+	return 1;
 }
 __setup("xive=off", xive_off);
 
 static int __init xive_store_eoi_cmdline(char *arg)
 {
 	if (!arg)
-		return -EINVAL;
+		return 1;
 
 	if (strncmp(arg, "off", 3) == 0) {
 		pr_info("StoreEOI disabled on kernel command line\n");
 		xive_store_eoi = false;
 	}
-	return 0;
+	return 1;
 }
 __setup("xive.store-eoi=", xive_store_eoi_cmdline);
 
Signature · 1 line
2.34.1
author maintainer
#670 lore raw

PATCH 670/1126 powerpc/time: Fix KVM host re-arming a timer beyond decrementer range

In reply to Greg Kroah-Hartman

From: Nicholas Piggin <[email protected]>

[ Upstream commit cf74ff52e352112be78c4c4c3637a37ec36a6608 ]

If the next host timer is beyond decrementer range, timer_rearm_host_dec will leave decrementer not programmed. This will not cause a problem for the host it will just set the decrementer correctly when the decrementer interrupt hits, it seems safer not to leave the next host decrementer interrupt timing able to be influenced by a guest.

This code is only used in the P9 KVM paths so it's unlikely to be hit practically unless large decrementer is force disabled in the host.

Fixes 25aa145856cd ("powerpc/time: add API for KVM to re-arm the host timer/decrementer")
---
 arch/powerpc/kernel/time.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/powerpc/kernel/time.c +3 -2
index cd0b8b71ecdd..384f58a3f373 100644
@@ -582,8 +582,9 @@ void timer_rearm_host_dec(u64 now)
 		local_paca->irq_happened |= PACA_IRQ_DEC;
 	} else {
 		now = *next_tb - now;
-		if (now <= decrementer_max)
-			set_dec_or_work(now);
+		if (now > decrementer_max)
+			now = decrementer_max;
+		set_dec_or_work(now);
 	}
 }
 EXPORT_SYMBOL_GPL(timer_rearm_host_dec);
Signature · 1 line
2.34.1
author maintainer
#671 lore raw

PATCH 671/1126 drm/i915/display: Fix HPD short pulse handling for eDP

In reply to Greg Kroah-Hartman

From: José Roberto de Souza <[email protected]>

[ Upstream commit 3a84fd1ed53582b31e843a152ee3219e9e4ccb8c ]

Commit 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off") completely broke short pulse handling for eDP as it is usually generated by sink when it is displaying image and there is some error or status that source needs to handle.

When power panel is enabled, this state is enough to power aux transactions and VDD override is disabled, so intel_pps_have_power() is always returning false causing short pulses to be ignored.

So here better naming this function that intends to check if aux lines are powered to avoid the endless cycle mentioned in the commit being fixed and fixing the check for what it is intended.

v2:
- renamed to intel_pps_have_panel_power_or_vdd()
- fixed indentation

Fixes 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off")
Cc Anshuman Gupta <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Uma Shankar <[email protected]>
Cc Ville Syrjälä <[email protected]>
(cherry picked from commit 8f0c1c0949b609acfad62b8d5f742a3b5e7b05ab)
---
 drivers/gpu/drm/i915/display/intel_dp.c  | 2 +-
 drivers/gpu/drm/i915/display/intel_pps.c | 6 +++---
 drivers/gpu/drm/i915/display/intel_pps.h | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +1 -1
index b5e2508db1cf..62e763faf0aa 100644
@@ -4831,7 +4831,7 @@ intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd)
 	struct intel_dp *intel_dp = &dig_port->dp;
 
 	if (dig_port->base.type == INTEL_OUTPUT_EDP &&
-	    (long_hpd || !intel_pps_have_power(intel_dp))) {
+	    (long_hpd || !intel_pps_have_panel_power_or_vdd(intel_dp))) {
 		/*
 		 * vdd off can generate a long/short pulse on eDP which
 		 * would require vdd on to handle it, and thus we
drivers/gpu/drm/i915/display/intel_pps.c +3 -3
index e9c679bb1b2e..5edd188d9747 100644
@@ -1075,14 +1075,14 @@ static void intel_pps_vdd_sanitize(struct intel_dp *intel_dp)
 	edp_panel_vdd_schedule_off(intel_dp);
 }
 
-bool intel_pps_have_power(struct intel_dp *intel_dp)
+bool intel_pps_have_panel_power_or_vdd(struct intel_dp *intel_dp)
 {
 	intel_wakeref_t wakeref;
 	bool have_power = false;
 
 	with_intel_pps_lock(intel_dp, wakeref) {
-		have_power = edp_have_panel_power(intel_dp) &&
-						  edp_have_panel_vdd(intel_dp);
+		have_power = edp_have_panel_power(intel_dp) ||
+			     edp_have_panel_vdd(intel_dp);
 	}
 
 	return have_power;
drivers/gpu/drm/i915/display/intel_pps.h +1 -1
index fbb47f6f453e..e64144659d31 100644
@@ -37,7 +37,7 @@ void intel_pps_vdd_on(struct intel_dp *intel_dp);
 void intel_pps_on(struct intel_dp *intel_dp);
 void intel_pps_off(struct intel_dp *intel_dp);
 void intel_pps_vdd_off_sync(struct intel_dp *intel_dp);
-bool intel_pps_have_power(struct intel_dp *intel_dp);
+bool intel_pps_have_panel_power_or_vdd(struct intel_dp *intel_dp);
 void intel_pps_wait_power_cycle(struct intel_dp *intel_dp);
 
 void intel_pps_init(struct intel_dp *intel_dp);
Signature · 1 line
2.34.1
author maintainer
#672 lore raw

PATCH 672/1126 drm/i915/display: Do not re-enable PSR after it was marked as not reliable

In reply to Greg Kroah-Hartman

From: José Roberto de Souza <[email protected]>

[ Upstream commit 278da06c03655c2bb9bc36ebdf45b90a079b3bfd ]

If a error happens and sink_not_reliable is set, PSR should be disabled for good but that is not happening.
It would be disabled by the function handling the PSR error but then on the next fastset it would be enabled again in _intel_psr_post_plane_update().
It would only be disabled for good in the next modeset where has_psr will be set false.

v2:
- release psr lock before continue

Fixes 9ce5884e5139 ("drm/i915/display: Only keep PSR enabled if there is active planes")
Cc Jouni Högander <[email protected]>
(cherry picked from commit 15f26bdc81f7f03561aaea5a10d87bd6638e1459)
---
 drivers/gpu/drm/i915/display/intel_psr.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/display/intel_psr.c +4 -0
index 00279e8c2775..b00de57cc957 100644
@@ -1816,6 +1816,9 @@ static void _intel_psr_post_plane_update(const struct intel_atomic_state *state,
 
 		mutex_lock(&psr->lock);
 
+		if (psr->sink_not_reliable)
+			goto exit;
+
 		drm_WARN_ON(&dev_priv->drm, psr->enabled && !crtc_state->active_planes);
 
 		/* Only enable if there is active planes */
@@ -1826,6 +1829,7 @@ static void _intel_psr_post_plane_update(const struct intel_atomic_state *state,
 		if (crtc_state->crc_enabled && psr->enabled)
 			psr_force_hw_tracking_exit(intel_dp);
 
+exit:
 		mutex_unlock(&psr->lock);
 	}
 }
Signature · 1 line
2.34.1
author maintainer
#673 lore raw

PATCH 673/1126 netfilter: flowtable: Fix QinQ and pppoe support for inet table

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 0492d857636e1c52cd71594a723c4b26a7b31978 ]

nf_flow_offload_inet_hook() does not check for 802.1q and PPPoE. Fetch inner ethertype from these encapsulation protocols.

Fixes 72efd585f714 ("netfilter: flowtable: add pppoe support")
Fixes 4cd91f7c290f ("netfilter: flowtable: add vlan support")
---
 include/net/netfilter/nf_flow_table.h | 18 ++++++++++++++++++
 net/netfilter/nf_flow_table_inet.c    | 17 +++++++++++++++++
 net/netfilter/nf_flow_table_ip.c      | 18 ------------------
 3 files changed, 35 insertions(+), 18 deletions(-)
include/net/netfilter/nf_flow_table.h +18 -0
index bd59e950f4d6..64daafd1fc41 100644
@@ -10,6 +10,8 @@
 #include <linux/netfilter/nf_conntrack_tuple_common.h>
 #include <net/flow_offload.h>
 #include <net/dst.h>
+#include <linux/if_pppox.h>
+#include <linux/ppp_defs.h>
 
 struct nf_flowtable;
 struct nf_flow_rule;
@@ -317,4 +319,20 @@ int nf_flow_rule_route_ipv6(struct net *net, const struct flow_offload *flow,
 int nf_flow_table_offload_init(void);
 void nf_flow_table_offload_exit(void);
 
+static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
+{
+	__be16 proto;
+
+	proto = *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
+			     sizeof(struct pppoe_hdr)));
+	switch (proto) {
+	case htons(PPP_IP):
+		return htons(ETH_P_IP);
+	case htons(PPP_IPV6):
+		return htons(ETH_P_IPV6);
+	}
+
+	return 0;
+}
+
 #endif /* _NF_FLOW_TABLE_H */
net/netfilter/nf_flow_table_inet.c +17 -0
index 5c57ade6bd05..0ccabf3fa6aa 100644
@@ -6,12 +6,29 @@
 #include <linux/rhashtable.h>
 #include <net/netfilter/nf_flow_table.h>
 #include <net/netfilter/nf_tables.h>
+#include <linux/if_vlan.h>
 
 static unsigned int
 nf_flow_offload_inet_hook(void *priv, struct sk_buff *skb,
 			  const struct nf_hook_state *state)
 {
+	struct vlan_ethhdr *veth;
+	__be16 proto;
+
 	switch (skb->protocol) {
+	case htons(ETH_P_8021Q):
+		veth = (struct vlan_ethhdr *)skb_mac_header(skb);
+		proto = veth->h_vlan_encapsulated_proto;
+		break;
+	case htons(ETH_P_PPP_SES):
+		proto = nf_flow_pppoe_proto(skb);
+		break;
+	default:
+		proto = skb->protocol;
+		break;
+	}
+
+	switch (proto) {
 	case htons(ETH_P_IP):
 		return nf_flow_offload_ip_hook(priv, skb, state);
 	case htons(ETH_P_IPV6):
net/netfilter/nf_flow_table_ip.c +0 -18
index 889cf88d3dba..6257d87c3a56 100644
@@ -8,8 +8,6 @@
 #include <linux/ipv6.h>
 #include <linux/netdevice.h>
 #include <linux/if_ether.h>
-#include <linux/if_pppox.h>
-#include <linux/ppp_defs.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
 #include <net/ip6_route.h>
@@ -239,22 +237,6 @@ static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb,
 	return NF_STOLEN;
 }
 
-static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
-{
-	__be16 proto;
-
-	proto = *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
-			     sizeof(struct pppoe_hdr)));
-	switch (proto) {
-	case htons(PPP_IP):
-		return htons(ETH_P_IP);
-	case htons(PPP_IPV6):
-		return htons(ETH_P_IPV6);
-	}
-
-	return 0;
-}
-
 static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
 				       u32 *offset)
 {
Signature · 1 line
2.34.1
author maintainer
#674 lore raw

PATCH 674/1126 mt76: mt7921: fix mt7921_queues_acq implementation

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit 849ee6ac9dd3efd0a57cbc98b9a9d6ae87374aff ]

Fix mt7921_queues_acq implementation according to the vendor sdk.

Fixes 474a9f21e2e20 ("mt76: mt7921: add debugfs support")
---
 drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c | 13 ++++++-------
 drivers/net/wireless/mediatek/mt76/mt7921/regs.h    | 11 +++++------
 2 files changed, 11 insertions(+), 13 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c +6 -7
index 45a393070e46..196b50e616fe 100644
@@ -129,23 +129,22 @@ mt7921_queues_acq(struct seq_file *s, void *data)
 
 	mt7921_mutex_acquire(dev);
 
-	for (i = 0; i < 16; i++) {
-		int j, acs = i / 4, index = i % 4;
+	for (i = 0; i < 4; i++) {
 		u32 ctrl, val, qlen = 0;
+		int j;
 
-		val = mt76_rr(dev, MT_PLE_AC_QEMPTY(acs, index));
-		ctrl = BIT(31) | BIT(15) | (acs << 8);
+		val = mt76_rr(dev, MT_PLE_AC_QEMPTY(i));
+		ctrl = BIT(31) | BIT(11) | (i << 24);
 
 		for (j = 0; j < 32; j++) {
 			if (val & BIT(j))
 				continue;
 
-			mt76_wr(dev, MT_PLE_FL_Q0_CTRL,
-				ctrl | (j + (index << 5)));
+			mt76_wr(dev, MT_PLE_FL_Q0_CTRL, ctrl | j);
 			qlen += mt76_get_field(dev, MT_PLE_FL_Q3_CTRL,
 					       GENMASK(11, 0));
 		}
-		seq_printf(s, "AC%d%d: queued=%d\n", acs, index, qlen);
+		seq_printf(s, "AC%d: queued=%d\n", i, qlen);
 	}
 
 	mt7921_mutex_release(dev);
drivers/net/wireless/mediatek/mt76/mt7921/regs.h +5 -6
index cbd38122c510..c8c92faa4624 100644
@@ -17,13 +17,12 @@
 #define MT_PLE_BASE			0x820c0000
 #define MT_PLE(ofs)			(MT_PLE_BASE + (ofs))
 
-#define MT_PLE_FL_Q0_CTRL		MT_PLE(0x1b0)
-#define MT_PLE_FL_Q1_CTRL		MT_PLE(0x1b4)
-#define MT_PLE_FL_Q2_CTRL		MT_PLE(0x1b8)
-#define MT_PLE_FL_Q3_CTRL		MT_PLE(0x1bc)
+#define MT_PLE_FL_Q0_CTRL		MT_PLE(0x3e0)
+#define MT_PLE_FL_Q1_CTRL		MT_PLE(0x3e4)
+#define MT_PLE_FL_Q2_CTRL		MT_PLE(0x3e8)
+#define MT_PLE_FL_Q3_CTRL		MT_PLE(0x3ec)
 
-#define MT_PLE_AC_QEMPTY(ac, n)		MT_PLE(0x300 + 0x10 * (ac) + \
-					       ((n) << 2))
+#define MT_PLE_AC_QEMPTY(_n)		MT_PLE(0x500 + 0x40 * (_n))
 #define MT_PLE_AMSDU_PACK_MSDU_CNT(n)	MT_PLE(0x10e0 + ((n) << 2))
 
 #define MT_MDP_BASE			0x820cd000
Signature · 1 line
2.34.1
author maintainer
#675 lore raw

PATCH 675/1126 can: isotp: return -EADDRNOTAVAIL when reading from unbound socket

In reply to Greg Kroah-Hartman

From: Oliver Hartkopp <[email protected]>

[ Upstream commit 30ffd5332e06316bd69a654c06aa033872979b7c ]

When reading from an unbound can-isotp socket the syscall blocked indefinitely. As unbound sockets (without given CAN address information) do not make sense anyway we directly return -EADDRNOTAVAIL on read() analogue to the known behavior from sendmsg().

---
 net/can/isotp.c | 4 ++++
 1 file changed, 4 insertions(+)
net/can/isotp.c +4 -0
index f8e3aeb79e3f..8966f06e0660 100644
@@ -1005,12 +1005,16 @@ static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 {
 	struct sock *sk = sock->sk;
 	struct sk_buff *skb;
+	struct isotp_sock *so = isotp_sk(sk);
 	int err = 0;
 	int noblock;
 
 	noblock = flags & MSG_DONTWAIT;
 	flags &= ~MSG_DONTWAIT;
 
+	if (!so->bound)
+		return -EADDRNOTAVAIL;
+
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
 	if (!skb)
 		return err;
Signature · 1 line
2.34.1
author maintainer
#676 lore raw

PATCH 676/1126 can: isotp: support MSG_TRUNC flag when reading from socket

In reply to Greg Kroah-Hartman

From: Oliver Hartkopp <[email protected]>

[ Upstream commit 42bf50a1795a1854d48717b7361dbdbce496b16b ]

When providing the MSG_TRUNC flag via recvmsg() syscall the return value provides the real length of the packet or datagram, even when it was longer than the passed buffer.

---
 net/can/isotp.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)
net/can/isotp.c +15 -12
index 8966f06e0660..ad61342d2e16 100644
@@ -1006,29 +1006,28 @@ static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 	struct sock *sk = sock->sk;
 	struct sk_buff *skb;
 	struct isotp_sock *so = isotp_sk(sk);
-	int err = 0;
-	int noblock;
+	int noblock = flags & MSG_DONTWAIT;
+	int ret = 0;
 
-	noblock = flags & MSG_DONTWAIT;
-	flags &= ~MSG_DONTWAIT;
+	if (flags & ~(MSG_DONTWAIT | MSG_TRUNC))
+		return -EINVAL;
 
 	if (!so->bound)
 		return -EADDRNOTAVAIL;
 
-	skb = skb_recv_datagram(sk, flags, noblock, &err);
+	flags &= ~MSG_DONTWAIT;
+	skb = skb_recv_datagram(sk, flags, noblock, &ret);
 	if (!skb)
-		return err;
+		return ret;
 
 	if (size < skb->len)
 		msg->msg_flags |= MSG_TRUNC;
 	else
 		size = skb->len;
 
-	err = memcpy_to_msg(msg, skb->data, size);
-	if (err < 0) {
-		skb_free_datagram(sk, skb);
-		return err;
-	}
+	ret = memcpy_to_msg(msg, skb->data, size);
+	if (ret < 0)
+		goto out_err;
 
 	sock_recv_timestamp(msg, sk, skb);
 
@@ -1038,9 +1037,13 @@ static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
 		memcpy(msg->msg_name, skb->cb, msg->msg_namelen);
 	}
 
+	/* set length of return value */
+	ret = (flags & MSG_TRUNC) ? skb->len : size;
+
+out_err:
 	skb_free_datagram(sk, skb);
 
-	return size;
+	return ret;
 }
 
 static int isotp_release(struct socket *sock)
Signature · 1 line
2.34.1
author maintainer
#677 lore raw

PATCH 677/1126 bareudp: use ipv6_mod_enabled to check if IPv6 enabled

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit e077ed58c243afc197bc2a2ba0e1ff61135e4ec2 ]

bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled. But if user start kernel with ipv6.disable=1, the bareudp sock will created failed, which cause the interface open failed even with ethertype ip. e.g.

 # ip link add bareudp1 type bareudp dstport 2 ethertype ip
 # ip link set bareudp1 up
 RTNETLINK answers: Address family not supported by protocol

Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h.

Fixes 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
---
 drivers/net/bareudp.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
drivers/net/bareudp.c +10 -9
index ba587e5fc24f..683203f87ae2 100644
@@ -148,14 +148,14 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 	skb_reset_network_header(skb);
 	skb_reset_mac_header(skb);
 
-	if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+	if (!ipv6_mod_enabled() || family == AF_INET)
 		err = IP_ECN_decapsulate(oiph, skb);
 	else
 		err = IP6_ECN_decapsulate(oiph, skb);
 
 	if (unlikely(err)) {
 		if (log_ecn_error) {
-			if  (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+			if  (!ipv6_mod_enabled() || family == AF_INET)
 				net_info_ratelimited("non-ECT from %pI4 "
 						     "with TOS=%#x\n",
 						     &((struct iphdr *)oiph)->saddr,
@@ -221,11 +221,12 @@ static struct socket *bareudp_create_sock(struct net *net, __be16 port)
 	int err;
 
 	memset(&udp_conf, 0, sizeof(udp_conf));
-#if IS_ENABLED(CONFIG_IPV6)
-	udp_conf.family = AF_INET6;
-#else
-	udp_conf.family = AF_INET;
-#endif
+
+	if (ipv6_mod_enabled())
+		udp_conf.family = AF_INET6;
+	else
+		udp_conf.family = AF_INET;
+
 	udp_conf.local_udp_port = port;
 	/* Open UDP socket */
 	err = udp_sock_create(net, &udp_conf, &sock);
@@ -448,7 +449,7 @@ static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	rcu_read_lock();
-	if (IS_ENABLED(CONFIG_IPV6) && info->mode & IP_TUNNEL_INFO_IPV6)
+	if (ipv6_mod_enabled() && info->mode & IP_TUNNEL_INFO_IPV6)
 		err = bareudp6_xmit_skb(skb, dev, bareudp, info);
 	else
 		err = bareudp_xmit_skb(skb, dev, bareudp, info);
@@ -478,7 +479,7 @@ static int bareudp_fill_metadata_dst(struct net_device *dev,
 
 	use_cache = ip_tunnel_dst_cache_usable(skb, info);
 
-	if (!IS_ENABLED(CONFIG_IPV6) || ip_tunnel_info_af(info) == AF_INET) {
+	if (!ipv6_mod_enabled() || ip_tunnel_info_af(info) == AF_INET) {
 		struct rtable *rt;
 		__be32 saddr;
 
Signature · 1 line
2.34.1