Skip to contentSkip to conversation

5.17.2-rc1 review

PATCH In review Greg Kroah-Hartman 16 participants 1,147 messages Apr 5, 2022 – Apr 6, 2022 Page 1 of 9

Subsystems (11)
Stable branch VFS MIPS Crypto API +7 more subsystems
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.17.2-rc1 review

This is the start of the stable review cycle for the 5.17.2 release. There are 1126 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.17.2-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.17.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.17.2-rc1

Eric W. Biederman <[email protected]>
coredump: Use the vma snapshot in fill_files_note

Eric W. Biederman <[email protected]>
coredump/elf: Pass coredump_params into fill_note_info

Eric W. Biederman <[email protected]>
coredump: Remove the WARN_ON in dump_vma_snapshot

Eric W. Biederman <[email protected]>
coredump: Snapshot the vmas in do_coredump

Ulf Hansson <[email protected]>
mmc: rtsx: Fix build errors/warnings for unused variable

Kai-Heng Feng <[email protected]>
mmc: rtsx: Let MMC core handle runtime PM

Jens Axboe <[email protected]>
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"

Jackie Liu <[email protected]>

    n64cart: convert bi_disk to bi_bdev->bd_disk fix build

Paul E. McKenney <[email protected]>
torture: Make torture.sh help message match reality

Martin Varghese <[email protected]>
openvswitch: Fixed nd target mask field in the flow dump.

Eli Cohen <[email protected]>
vdpa/mlx5: Avoid processing works if workqueue was destroyed

Maciej Fijalkowski <[email protected]>
ice: xsk: Fix indexing in ice_tx_xsk_pool()

Magnus Karlsson <[email protected]>
xsk: Do not write NULL in SW ring at allocation failure

Guilherme G. Piccoli <[email protected]>
docs: sysctl/kernel: add missing bit to panic_print

Anton Ivanov <[email protected]>
um: Fix uml_mconsole stop/go

Kuldeep Singh <[email protected]>
arm64: dts: ls1046a: Update i2c node dma properties

Kuldeep Singh <[email protected]>
arm64: dts: ls1043a: Update i2c dma properties

Kuldeep Singh <[email protected]>
ARM: dts: spear13xx: Update SPI dma properties

Kuldeep Singh <[email protected]>
ARM: dts: spear1340: Update serial node properties

Leilk Liu <[email protected]>
spi: mediatek: support tick_delay without enhance_timing

Guodong Liu <[email protected]>
pinctrl: canonical rsel resistance selection property

Janusz Krzysztofik <[email protected]>
media: ov6650: Fix crop rectangle affected by set format

Janusz Krzysztofik <[email protected]>
media: ov6650: Add try support to selection API operations

Ian Rogers <[email protected]>
perf vendor events: Update metrics for SkyLake Server

Amadeusz Sławiński <[email protected]>
ASoC: topology: Allow TLV control to be either read or write

Zheng Bin <[email protected]>
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV

Eric Dumazet <[email protected]>
net: preserve skb_end_offset() in skb_unclone_keeptruesize()

Zhihao Cheng <[email protected]>
ubi: fastmap: Return error code if memory allocation fails in add_aeb()

Horatiu Vultur <[email protected]>
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Fix example

Chen-Yu Tsai <[email protected]>
dt-bindings: pinctrl: mt8195: fix bias-pull-{up,down} checks

Yong Wu <[email protected]>
dt-bindings: memory: mtk-smi: Correct minItems to 2 for the gals clocks

Yong Wu <[email protected]>
dt-bindings: memory: mtk-smi: No need mediatek,larb-id for mt8167

Yong Wu <[email protected]>
dt-bindings: memory: mtk-smi: Rename clock to clocks

Martin Kepplinger <[email protected]>
media: dt-bindings: media: hynix,hi846: add link-frequencies description

Martin Kepplinger <[email protected]>
media: dt-binding: media: hynix,hi846: use $defs/port-base port description

Miquel Raynal <[email protected]>
dt-bindings: spi: mxic: The interrupt property is not mandatory

Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix a comment in the examples

Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix the reg property description

Kai-Heng Feng <[email protected]>
mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM

Zhang Wensheng <[email protected]>
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()

Hengqi Chen <[email protected]>
bpf: Fix comment for helper bpf_current_task_under_cgroup()

Namhyung Kim <[email protected]>
bpf: Adjust BPF stack helper functions to accommodate skip > 0

Toke Høiland-Jørgensen <[email protected]>
libbpf: Define BTF_KIND_* constants in btf.h to avoid compilation errors

Kuniyuki Iwashima <[email protected]>
af_unix: Support POLLPRI for OOB.

Randy Dunlap <[email protected]>
mm/usercopy: return 1 from hardened_usercopy __setup() handler

Randy Dunlap <[email protected]>
mm/memcontrol: return 1 from cgroup.memory __setup() handler

Randy Dunlap <[email protected]>
ARM: 9187/1: JIVE: fix return value of __setup handler

Randy Dunlap <[email protected]>
mm/mmap: return 1 from stack_guard_gap __setup() handler

Eric Dumazet <[email protected]>
net: add skb_set_end_offset() helper

Nemanja Rakovic <[email protected]>
mips: Enable KCSAN - take 2

Steven Rostedt (Google) <[email protected]>
tracing: Have type enum modifications copy the strings

Linus Torvalds <[email protected]>
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

Duoming Zhou <[email protected]>
ax25: fix UAF bug in ax25_send_control()

Maxim Levitsky <[email protected]>
KVM: x86: SVM: fix avic spec based definitions again

Jiasheng Jiang <[email protected]>
ASoC: soc-compress: Change the check for codec_dai

Will Deacon <[email protected]>
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition

Wan Jiabing <[email protected]>
docs: fix 'make htmldocs' warning in SCTP.rst

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl-0 items to be size-1 items on ethernet

Saurav Kashyap <[email protected]>
scsi: qla2xxx: Add qla2x00_async_done() for async routines

Maxime Ripard <[email protected]>
drm/connector: Fix typo in documentation

Joerg Roedel <[email protected]>
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO

Yang Zhong <[email protected]>
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Lv Ruyi <[email protected]>
proc: bootconfig: Add null pointer check

Oliver Hartkopp <[email protected]>
can: isotp: restore accidentally removed MSG_PEEK feature

Hans de Goede <[email protected]>
platform/x86: asus-wmi: Fix regression when probing for fan curve control

Prashant Malani <[email protected]>
platform/chrome: cros_ec_typec: Check for EC device

Jon Hunter <[email protected]>
spi: Fix Tegra QSPI example

Anirudh Rayabharam <[email protected]>
vhost: handle error while adding split ranges to iotlb

Rafael J. Wysocki <[email protected]>
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data

Fangrui Song <[email protected]>
riscv module: remove (NOLOAD)

Pavel Begunkov <[email protected]>
io_uring: fix memory leak of uid in files registration

Jens Axboe <[email protected]>
io_uring: bump poll refs to full 31-bits

Jens Axboe <[email protected]>
io_uring: remove poll entry from list when canceling all

Stefano Garzarella <[email protected]>
virtio: use virtio_device_ready() in virtio_device_restore()

Jason Wang <[email protected]>
Revert "virtio_pci: harden MSI-X interrupts"

Jason Wang <[email protected]>
Revert "virtio-pci: harden INTX interrupts"

Jiri Slaby <[email protected]>
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING

Christophe JAILLET <[email protected]>
block: Fix the maximum minor value is blk_alloc_ext_minor()

Arnd Bergmann <[email protected]>
ARM: iop32x: offset IRQ numbers by 1

Baokun Li <[email protected]>
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl

Jiaxin Yu <[email protected]>
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs

Meng Tang <[email protected]>
ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B

Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Use %zu printk format for ARRAY_SIZE()

Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Rename DS() macro to DSTR()

Randy Dunlap <[email protected]>
net: sparx5: uses, depends on BRIDGE or !BRIDGE

Miaoqian Lin <[email protected]>
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function

Chen-Yu Tsai <[email protected]>
pinctrl: pinconf-generic: Print arguments for bias-pull-*

Eric Dumazet <[email protected]>
watch_queue: Free the page array when watch_queue is dismantled

Herbert Xu <[email protected]>
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes

Peter Zijlstra <[email protected]>

    crypto: x86/poly1305 - Fixup SLS

Robin Gong <[email protected]>
mailbox: imx: fix wakeup failure from freeze mode

David Howells <[email protected]>
rxrpc: Fix call timer start racing with call destruction

Xiaolong Huang <[email protected]>
rxrpc: fix some null-ptr-deref bugs in server_key.c

Guangbin Huang <[email protected]>
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware

Yufeng Mo <[email protected]>
net: hns3: fix the concurrency between functions reading debugfs

Andrew Price <[email protected]>
gfs2: Make sure FITRIM minlen is rounded up to fs block size

Andreas Gruenbacher <[email protected]>
gfs2: Fix gfs2_file_buffered_write endless loop workaround

Andreas Gruenbacher <[email protected]>
gfs2: gfs2_setattr_size error path fix

Carlos Llamas <[email protected]>
loop: fix ioctl calls using compat_loop_info

Tom Rix <[email protected]>
rtc: check if __rtc_read_time was successful

Miaoqian Lin <[email protected]>
rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram

Masahiro Yamada <[email protected]>
modpost: restore the warning message for missing symbol versions

Matthew Wilcox (Oracle) <[email protected]>
XArray: Update the LRU list in xas_split()

Matthew Wilcox (Oracle) <[email protected]>
XArray: Include bitmap.h from xarray.h

Tom Rix <[email protected]>
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value

Pavel Skripkin <[email protected]>
can: mcba_usb: properly check endpoint type

Hangyu Hua <[email protected]>
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path

Matthew Wilcox (Oracle) <[email protected]>
XArray: Fix xas_create_range() when multi-order entry present

Jason A. Donenfeld <[email protected]>
wireguard: socket: ignore v6 endpoints when ipv6 is disabled

Wang Hai <[email protected]>
wireguard: socket: free skb in send6 when ipv6 is disabled

Jason A. Donenfeld <[email protected]>
wireguard: queueing: use CFI-safe ptr_ring cleanup function

Pankaj Raghav <[email protected]>
nvme: fix the read-only state for zoned namespaces with unsupposed features

Sungup Moon <[email protected]>
nvme: allow duplicate NSIDs for private namespaces

Baokun Li <[email protected]>
ubifs: rename_whiteout: correct old_dir size computing

Zhihao Cheng <[email protected]>
ubifs: Fix to add refcount once page is set private

Zhihao Cheng <[email protected]>
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()

Zhihao Cheng <[email protected]>
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned

Zhihao Cheng <[email protected]>
ubifs: Rectify space amount budget for mkdir/tmpfile operations

Zhihao Cheng <[email protected]>

    ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work

Zhihao Cheng <[email protected]>
ubifs: Rename whiteout atomically

Zhihao Cheng <[email protected]>
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout

Zhihao Cheng <[email protected]>
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback

Zhihao Cheng <[email protected]>

    ubifs: rename_whiteout: Fix double free for whiteout_ui->data

David Woodhouse <[email protected]>
KVM: avoid double put_page with gfn-to-pfn cache

Yi Wang <[email protected]>
KVM: SVM: fix panic on out-of-bounds guest IRQ

Li RongQing <[email protected]>
KVM: x86: fix sending PV IPI

David Matlack <[email protected]>
KVM: Prevent module exit until all VMs are freed

Paolo Bonzini <[email protected]>
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address

Vitaly Kuznetsov <[email protected]>
KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated

Vitaly Kuznetsov <[email protected]>
KVM: x86: Avoid theoretical NULL pointer dereference in kvm_irq_delivery_to_apic_fast()

Vitaly Kuznetsov <[email protected]>
KVM: x86: Check lapic_in_kernel() before attempting to set a SynIC irq

Paul Cercueil <[email protected]>
MIPS: crypto: Fix CRC32 code

Gwendal Grignou <[email protected]>
platform: chrome: Split trace include file

Manish Rangankar <[email protected]>
scsi: qla2xxx: Use correct feature type field during RFF_ID processing

Quinn Tran <[email protected]>
scsi: qla2xxx: Reduce false trigger to login

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stuck session of PRLI reject

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix N2N inconsistent PLOGI

Arun Easi <[email protected]>
scsi: qla2xxx: Fix crash during module load unload test

Arun Easi <[email protected]>
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix laggy FC remote port session recovery

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix hang due to session stuck

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix incorrect reporting of task management failure

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix disk failure to rediscover

Saurav Kashyap <[email protected]>
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()

Joe Carnuccio <[email protected]>
scsi: qla2xxx: Check for firmware dump already collected

Joe Carnuccio <[email protected]>
scsi: qla2xxx: Add devids and conditionals for 28xx

Joe Carnuccio <[email protected]>
scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix clang warning

Arun Easi <[email protected]>
scsi: qla2xxx: Fix device reconnect in loop topology

Nilesh Javali <[email protected]>
scsi: qla2xxx: Fix warning for missing error code

Bikash Hazarika <[email protected]>
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix premature hw access after PCI error

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix scheduling while atomic

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix warning message due to adisc being flushed

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stuck session in gpdb

Saurav Kashyap <[email protected]>
scsi: qla2xxx: Implement ref count for SRB

Daniel Wagner <[email protected]>
scsi: qla2xxx: Refactor asynchronous command initialization

Ville Syrjälä <[email protected]>
drm/i915: Reject unsupported TMDS rates on ICL+

Ville Syrjälä <[email protected]>
drm/i915: Fix PSF GV point mask when SAGV is not possible

Ville Syrjälä <[email protected]>
drm/i915: Treat SAGV block time 0 as SAGV disabled

Kees Cook <[email protected]>
drm/dp: Fix off-by-one in register cache size

Anders Roxell <[email protected]>
powerpc: Fix build errors with newer binutils

Christophe Leroy <[email protected]>
powerpc: Add set_memory_{p/np}() and remove set_memory_attr()

Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix build errors with newer binutils

Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix 'sthcx' instruction

Nicholas Piggin <[email protected]>
powerpc/tm: Fix more userspace r13 corruption

Chen Jingwen <[email protected]>
powerpc/kasan: Fix early region not updated correctly

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: HVCALL_SEND_IPI_EX is an XMM fast hypercall

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Fix the maximum number of sparse banks for XMM fast TLB flush hypercalls

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_flush_tlb()

Vitaly Kuznetsov <[email protected]>
KVM: x86: hyper-v: Drop redundant 'ex' parameter from kvm_hv_send_ipi()

Sean Christopherson <[email protected]>
KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU

Sean Christopherson <[email protected]>
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU

Sean Christopherson <[email protected]>
KVM: x86/mmu: Move "invalid" check out of kvm_tdp_mmu_get_root()

Sean Christopherson <[email protected]>
KVM: x86/mmu: Use common TDP MMU zap helper for MMU notifier unmap hook

Paolo Bonzini <[email protected]>
KVM: x86: Reinitialize context if host userspace toggles EFER.LME

Suravee Suthikulpanit <[email protected]>
KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255

Matt Kramer <[email protected]>
ALSA: hda/realtek: Add alc256-samsung-headphone fixup

Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix bad usage at error handling logic

Miaoqian Lin <[email protected]>

    ASoC: mediatek: Fix error handling in mt8183_da7219_max98357_dev_probe

Ulf Hansson <[email protected]>

    mmc: host: Return an error when ->enable_sdio_irq() ops is missing

Steven Rostedt (Google) <[email protected]>
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: sof_es8336: log all quirks

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: sof_es8336: use NHLT information to set dmic and SSP

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: Revert "ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021"

Pierre-Louis Bossart <[email protected]>
ALSA: intel-dspconfig: add ES8336 support for CNL

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: soc-acpi: add more ACPI HIDs for ES83x6 devices

Pierre-Louis Bossart <[email protected]>
ALSA: intel-dsp-config: add more ACPI HIDs for ES83x6 devices

Pierre-Louis Bossart <[email protected]>
ALSA: intel-nhlt: add helper to detect SSP link mask

Pierre-Louis Bossart <[email protected]>
ASoC: SOF: Intel: hda: retrieve DMIC number for I2S boards

Anthony I Gilea <[email protected]>
ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13"

Pierre-Louis Bossart <[email protected]>
ASoC: SOF: debug: clarify operator precedence

Dongliang Mu <[email protected]>

    media: hdpvr: initialize dev->worker at hdpvr_register_videodev

Pavel Skripkin <[email protected]>
media: Revert "media: em28xx: add missing em28xx_close_extension"

Hans de Goede <[email protected]>
media: i2c: ov5648: Fix lockdep error

Zheyu Ma <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_write()

Vijendar Mukunda <[email protected]>
ASoC: amd: vangogh: fix uninitialized symbol warning in machine driver

Vijendar Mukunda <[email protected]>
ASoC: amd: vg: fix for pm resume callback sequence

Uwe Kleine-König <[email protected]>
ARM: mmp: Fix failure to remove sram device

Richard Leitner <[email protected]>
ARM: tegra: tamonten: Fix I2C3 pad setting

Arnd Bergmann <[email protected]>
lib/test_lockup: fix kernel pointer check for separate address spaces

Arnd Bergmann <[email protected]>
uaccess: fix type mismatch warnings from access_ok()

Svyatoslav Ryhel <[email protected]>
ARM: tegra: transformer: Drop reg-shift for Tegra HS UART

Derek Fang <[email protected]>
ASoC: rt5682s: Fix the wrong jack type detected

Daniel González Cabanelas <[email protected]>
media: cx88-mpeg: clear interrupt status register before streaming video

Ming Qian <[email protected]>
media: imx-jpeg: fix a bug of accessing array out of bounds

Mauro Carvalho Chehab <[email protected]>

    ASoC: Intel: sof_es8336: add quirk for Huawei D15 2021

Shengjiu Wang <[email protected]>
ASoC: soc-core: skip zero num_dai component in searching dai name

Richard Schleich <[email protected]>
ARM: dts: bcm2711: Add the missing L1/L2 cache information

Jing Yao <[email protected]>
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit

Jing Yao <[email protected]>
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()

Jing Yao <[email protected]>
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()

Marcel Ziswiler <[email protected]>
arm64: defconfig: build imx-sdma as a module

Abel Vesa <[email protected]>
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk

Takashi Iwai <[email protected]>
ALSA: hda: Fix driver index handling at re-binding

Ard Biesheuvel <[email protected]>
ARM: ftrace: avoid redundant loads or clobbering IP

Tsuchiya Yuto <[email protected]>
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo

Hans de Goede <[email protected]>
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards

Charles Keepax <[email protected]>
ASoC: madera: Add dependencies on MFD

Richard Schleich <[email protected]>
ARM: dts: bcm2837: Add the missing L1/L2 cache information

David Heidelberg <[email protected]>
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960

Yang Guang <[email protected]>
video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit

George Kennedy <[email protected]>
video: fbdev: cirrusfb: check pixclock to avoid divide by zero

Evgeny Novikov <[email protected]>
video: fbdev: w100fb: Reset global state

Tim Gardner <[email protected]>
video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow

Yong Wu <[email protected]>
media: iommu/mediatek: Add device_link between the consumer and the larb devices

Yong Wu <[email protected]>
media: iommu/mediatek: Return ENODEV if the device is NULL

Yong Wu <[email protected]>
media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has

Ranjani Sridharan <[email protected]>
ASoC: SOF: Intel: hda: Remove link assignment limitation

Mirela Rabulea <[email protected]>
media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers

Bard Liao <[email protected]>
ASoC: SOF: Intel: match sdw version on link_slaves_found

Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Report full jack status when plug is detected

Lad Prabhakar <[email protected]>
ASoC: sh: rz-ssi: Make the data structures available before registering the handlers

Peiwei Hu <[email protected]>
media: ir_toy: free before error exiting

Eugen Hristev <[email protected]>
media: atmel: atmel-isc-base: report frame sizes as full supported range

Hans Verkuil <[email protected]>
media: staging: media: zoran: fix various V4L2 compliance errors

Corentin Labbe <[email protected]>
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com

Corentin Labbe <[email protected]>
media: staging: media: zoran: move videodev alloc

Dongliang Mu <[email protected]>
ntfs: add sanity check on allocation size

Rohith Surabattula <[email protected]>
Adjust cifssb maximum read size

Chao Yu <[email protected]>
f2fs: compress: fix to print raw data size in error path of lz4 decompression

Jaegeuk Kim <[email protected]>
f2fs: use spin_lock to avoid hang

Josef Bacik <[email protected]>
btrfs: do not clean up repair bio if submit fails

Josef Bacik <[email protected]>
btrfs: do not double complete bio on errors during compressed reads

Josef Bacik <[email protected]>
btrfs: handle csum lookup errors properly on reads

Josef Bacik <[email protected]>
btrfs: make search_csum_tree return 0 if we get -EFBIG

Anand Jain <[email protected]>
btrfs: harden identification of a stale device

Jaegeuk Kim <[email protected]>
f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fs

Chuck Lever <[email protected]>
NFSD: Fix nfsd_breaker_owns_lease() return values

Chao Yu <[email protected]>

    f2fs: fix to do sanity check on curseg->alloc_type

Theodore Ts'o <[email protected]>
ext4: don't BUG if someone dirty pages without asking ext4 first

Valentin Schneider <[email protected]>
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE

Valentin Schneider <[email protected]>

    sched/tracing: Don't re-read p->state when emitting sched_switch event

Ritesh Harjani <[email protected]>
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit

Ritesh Harjani <[email protected]>
ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bb

Waiman Long <[email protected]>
locking/lockdep: Iterate lock_classes directly when reading lockdep files

Mark Rutland <[email protected]>
atomics: Fix atomic64_{read_acquire,set_release} fallbacks

Eddie James <[email protected]>
spi: fsi: Implement a timeout for polling status

Minghao Chi <[email protected]>
spi: tegra20: Use of_device_get_match_data()

Chris Leech <[email protected]>
nvme-tcp: lockdep: annotate in-kernel sockets

John David Anglin <[email protected]>
parisc: Fix handling off probe non-access faults

John David Anglin <[email protected]>
parisc: Fix non-access data TLB cache flush faults

Dmitry Baryshkov <[email protected]>
PM: core: keep irq flags in device_pm_check_callbacks()

Darren Hart <[email protected]>
ACPI/APEI: Limit printable size of BERT table data

Paolo Valente <[email protected]>
Revert "Revert "block, bfq: honor already-setup queue merges""

Paul Menzel <[email protected]>

    lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3

Hans de Goede <[email protected]>
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L

Hans de Goede <[email protected]>
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8

Rafael J. Wysocki <[email protected]>
ACPICA: Avoid walking the ACPI Namespace if it is not there

Zhang Wensheng <[email protected]>
bfq: fix use-after-free in bfq_dispatch_request

Wan Jiabing <[email protected]>
hwrng: cavium - fix NULL but dereferenced coccicheck error

Akira Kawata <[email protected]>
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files

Souptick Joarder (HPE) <[email protected]>
irqchip/nvic: Release nvic_base upon failure

Marc Zyngier <[email protected]>
irqchip/qcom-pdc: Fix broken locking

Casey Schaufler <[email protected]>
Fix incorrect type in assignment of ipv6 port for audit

Chaitanya Kulkarni <[email protected]>
loop: use sysfs_emit() in the sysfs xxx show()

Richard Haines <[email protected]>
selinux: allow FIOCLEX and FIONCLEX with policy capability

Fangrui Song <[email protected]>
arm64: module: remove (NOLOAD) from linker script

Daniel Lezcano <[email protected]>
powercap/dtpm_cpu: Reset per_cpu variable in the release function

Christian Göttsche <[email protected]>
selinux: use correct type for context length

Yu Kuai <[email protected]>
block, bfq: don't move oom_bfqq

Kai Ye <[email protected]>
crypto: hisilicon/sec - not need to enable sm4 extra mode at HW V3

Herbert Xu <[email protected]>
crypto: xts - Add softdep on ecb

Yahu Gao <[email protected]>
block/bfq_wf2q: correct weight to ioprio

Christoph Hellwig <[email protected]>
memstick/mspro_block: fix handling of read-only devices

Ming Lei <[email protected]>
block: throttle split bio in case of iops limit

Paul E. McKenney <[email protected]>

    rcu: Mark writes to the rcu_segcblist structure's ->flags field

Marc Zyngier <[email protected]>

    pinctrl: npcm: Fix broken references to chip->parent_device

David Woodhouse <[email protected]>

    rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion

Kees Cook <[email protected]>
gcc-plugins/stackleak: Exactly match strings instead of prefixes

Srujana Challa <[email protected]>
crypto: octeontx2 - CN10K CPT to RNM workaround

Kai Ye <[email protected]>
crypto: hisilicon/qm - cleanup warning in qm_vf_read_qos

Dave Stevenson <[email protected]>
regulator: rpi-panel: Handle I2C errors/timing to the Atmel

Casey Schaufler <[email protected]>
LSM: general protection fault in legacy_parse_param

Linus Torvalds <[email protected]>
fs: fix fd table size alignment properly

Dan Carpenter <[email protected]>
lib/test: use after free in register_test_dev_kmod()

Linus Torvalds <[email protected]>
fs: fd tables have to be multiples of BITS_PER_LONG

Xiaomeng Tong <[email protected]>
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator

Trond Myklebust <[email protected]>
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head

Marcelo Ricardo Leitner <[email protected]>
net/sched: act_ct: fix ref leak when switching zones

Jakub Kicinski <[email protected]>
selftests: tls: skip cmsg_to_pipe tests with TLS=n

Tom Rix <[email protected]>
octeontx2-af: initialize action variable

Zheng Yongjun <[email protected]>
net: sparx5: switchdev: fix possible NULL pointer dereference

Duoming Zhou <[email protected]>
net/x25: Fix null-ptr-deref caused by x25_disconnect

Tom Rix <[email protected]>
qlcnic: dcb: default to returning -EOPNOTSUPP

Randy Dunlap <[email protected]>
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL

Guangbin Huang <[email protected]>
net: hns3: fix phy can not link up when autoneg off and reset

Hao Chen <[email protected]>
net: hns3: add NULL pointer check for hns3_set/get_ringparam()

Hao Chen <[email protected]>
net: hns3: add netdev reset check for hns3_set_tunable()

Peng Li <[email protected]>
net: hns3: clean residual vf config after disable sriov

Hao Chen <[email protected]>
net: hns3: add max order judgement for tx spare buffer

Hao Chen <[email protected]>
net: hns3: fix ethtool tx copybreak buf size indicating not aligned issue

Shunsuke Nakamura <[email protected]>
libperf tests: Fix typo in perf_evlist__open() failure error messages

Trond Myklebust <[email protected]>
NFS: Don't loop forever in nfs_do_recoalesce()

Ido Schimmel <[email protected]>
selftests: test_vxlan_under_vrf: Fix broken test case

Florian Fainelli <[email protected]>
net: phy: broadcom: Fix brcm_fet_config_init()

Jian Shen <[email protected]>
net: hns3: refine the process when PF set VF VLAN

Jian Shen <[email protected]>
net: hns3: add vlan list lock to protect vlan list

Jian Shen <[email protected]>
net: hns3: fix port base vlan add fail when concurrent with reset

Jian Shen <[email protected]>
net: hns3: fix bug when PF set the duplicate MAC address for VFs

Vladimir Oltean <[email protected]>
net: enetc: report software timestamping via SO_TIMESTAMPING

Juergen Gross <[email protected]>
xen: fix is_xen_pmu()

Maxime Ripard <[email protected]>
clk: Initialize orphan req_rate

Stefano Garzarella <[email protected]>
vsock/virtio: enable VQs early on probe

Stefano Garzarella <[email protected]>
vsock/virtio: read the negotiated features before using VQs

Stefano Garzarella <[email protected]>

    vsock/virtio: initialize vdev->priv before using VQs

Konrad Dybcio <[email protected]>
clk: qcom: gcc-msm8994: Fix gpll4 width

Bjorn Andersson <[email protected]>
net: stmmac: dwmac-qcom-ethqos: Enable RGMII functional clock on resume

Thomas Richter <[email protected]>
perf stat: Fix forked applications enablement of counters

Daniel Thompson <[email protected]>
kdb: Fix the putarea helper function

Olga Kornievskaia <[email protected]>
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error

Olga Kornievskaia <[email protected]>
SUNRPC don't resend a task on an offlined transport

Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options

Phil Sutter <[email protected]>
netfilter: egress: Report interface as outgoing

Ian Rogers <[email protected]>
perf parse-events: Move slots only with topdown

Trond Myklebust <[email protected]>
SUNRPC: Don't call connect() more than once on a TCP socket

NeilBrown <[email protected]>
SUNRPC: improve 'swap' handling: scheduling and PF_MEMALLOC

NeilBrown <[email protected]>
SUNRPC/call_alloc: async tasks mustn't block waiting for memory

Pavel Skripkin <[email protected]>
jfs: fix divide error in dbNextAG

German Gomez <[email protected]>
perf test arm64: Test unwinding using fame-pointer (fp) mode

Randy Dunlap <[email protected]>
driver core: dd: fix return value of __setup handler

David Gow <[email protected]>
firmware: google: Properly state IOMEM dependency

Randy Dunlap <[email protected]>
kgdbts: fix return value of __setup handler

Xiaolong Huang <[email protected]>
virt: acrn: fix a memory leak in acrn_dev_ioctl()

Yonghua Huang <[email protected]>
virt: acrn: obtain pa from VMA with PFNMAP flag

Ilpo Järvinen <[email protected]>
serial: 8250: fix XOFF/XON sending when DMA is used

Randy Dunlap <[email protected]>
kgdboc: fix return value of __setup handler

Randy Dunlap <[email protected]>
tty: hvc: fix return value of __setup handler

Dan Carpenter <[email protected]>
clk: visconti: prevent array overflow in visconti_clk_register_gates()

Miaoqian Lin <[email protected]>
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe

Miaoqian Lin <[email protected]>
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe

Michael Walle <[email protected]>
pinctrl: microchip-sgpio: lock RMW access

Horatiu Vultur <[email protected]>
pinctrl: ocelot: Fix interrupt parsing

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix pingroup pin config state readback

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()

Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback

Miaoqian Lin <[email protected]>
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init

Michael Walle <[email protected]>
pinctrl: ocelot: fix duplicate debugfs entry

Michael Walle <[email protected]>
pinctrl: ocelot: fix confops resource index

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix GB-PC2 devicetree

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl properties for ethernet

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix formatting

Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree

Alexey Khoroshilov <[email protected]>
NFS: remove unneeded check in decode_devicenotify_args()

Robin Gong <[email protected]>
mailbox: imx: fix crash in resume on i.mx8ulp

Miaoqian Lin <[email protected]>
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver

Maxime Ripard <[email protected]>
clk: Fix clk_hw_get_clk() when dev is NULL

Jonathan Neuschäfer <[email protected]>
clk: clps711x: Terminate clk_div_table with sentinel element

Jonathan Neuschäfer <[email protected]>
clk: hisilicon: Terminate clk_div_table with sentinel element

Jonathan Neuschäfer <[email protected]>
clk: loongson1: Terminate clk_div_table with sentinel element

Jonathan Neuschäfer <[email protected]>
clk: actions: Terminate clk_div_table with sentinel element

Dan Williams <[email protected]>
nvdimm/region: Fix default alignment for small regions

Miaoqian Lin <[email protected]>
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region

Miaoqian Lin <[email protected]>
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region

Miaoqian Lin <[email protected]>
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region

Jie Hai <[email protected]>
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma

Emil Renner Berthing <[email protected]>
clk: starfive: jh7100: Handle audio_div clock properly

Emil Renner Berthing <[email protected]>
clk: starfive: jh7100: Don't round divisor up twice

Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update the frac table for pixel clock

Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG

Codrin Ciubotariu <[email protected]>
clk: at91: sama7g5: fix parents of PDMCs' GCLK

Dan Carpenter <[email protected]>
clk: imx: off by one in imx_lpcg_parse_clks_from_dt()

Abel Vesa <[email protected]>
clk: imx7d: Remove audio_mclk_root_clk

Randy Dunlap <[email protected]>
dma-debug: fix return value of __setup handlers

Martin Kaiser <[email protected]>
staging: r8188eu: fix endless loop in recv_func

Trond Myklebust <[email protected]>
NFS: Return valid errors from nfs2/3_decode_dirent()

Jiasheng Jiang <[email protected]>
habanalabs: Add check for pci_enable_device

Jiasheng Jiang <[email protected]>
iio: adc: Add check for devm_request_threaded_irq

Uwe Kleine-König <[email protected]>
serial: 8250: Fix race condition in RTS-after-send handling

Trond Myklebust <[email protected]>
NFS: Use of mapping_set_error() results in spurious errors

Andy Shevchenko <[email protected]>
serial: 8250_lpss: Balance reference count for PCI DMA device

Andy Shevchenko <[email protected]>
serial: 8250_mid: Balance reference count for PCI DMA device

Rafał Miłecki <[email protected]>
phy: phy-brcm-usb: fixup BCM4908 support

Liu Ying <[email protected]>
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})

Dirk Buchwalder <[email protected]>
clk: qcom: ipq8074: Use floor ops for SDCC1 clock

Geert Uytterhoeven <[email protected]>
pinctrl: renesas: checker: Fix miscalculation of number of states

Geert Uytterhoeven <[email protected]>
pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel

Geert Uytterhoeven <[email protected]>
clk: renesas: r8a779f0: Fix RSW2 clock divider

Jonathan Cameron <[email protected]>
staging:iio:adc:ad7280a: Fix handing of device address bit reversing.

Zev Weiss <[email protected]>
serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type

Hangyu Hua <[email protected]>
staging: qlge: add unregister_netdev in qlge_probe

Hans de Goede <[email protected]>
iio: mma8452: Fix probe failing when an i2c_device_id is used

Dave Jiang <[email protected]>
dmaengine: idxd: restore traffic class defaults after wq reset

Robert Marko <[email protected]>
clk: qcom: ipq8074: fix PCI-E clock oops

Libin Yang <[email protected]>
soundwire: intel: fix wrong register name in intel_shim_wake

Luca Weiss <[email protected]>
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse

Christophe JAILLET <[email protected]>
misc: alcor_pci: Fix an error handling path

Christophe JAILLET <[email protected]>
fsi: Aspeed: Fix a potential double free

Robert Hancock <[email protected]>
pps: clients: gpio: Propagate return value from pps_gpio_probe

Uwe Kleine-König <[email protected]>
pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()

Joel Stanley <[email protected]>
fsi: scom: Remove retries in indirect scoms

Joel Stanley <[email protected]>
fsi: scom: Fix error handling

Jiri Slaby <[email protected]>

    mxser: fix xmit_buf leak in activate when LSR == 0xff

Michael Straube <[email protected]>
staging: r8188eu: release_firmware is not called if allocation fails

Lad Prabhakar <[email protected]>
clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3

Miaohe Lin <[email protected]>
kernel/resource: fix kfree() of bootmem memory again

Sondhauß, Jan <[email protected]>
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool

Alexander Lobakin <[email protected]>
ice: don't allow to run ice_send_event_to_aux() in atomic ctx

Alexander Lobakin <[email protected]>
ice: fix 'scheduling while atomic' on aux critical err interrupt

Miaoqian Lin <[email protected]>
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe

Hoang Le <[email protected]>
tipc: fix the timer expires after interval 100ms

Yang Yingliang <[email protected]>
net: wwan: qcom_bam_dmux: fix wrong pointer passed to IS_ERR()

Vladimir Oltean <[email protected]>
net: dsa: fix panic on shutdown if multi-chip tree failed to probe

Aaron Conole <[email protected]>
openvswitch: always update flow key after nat

Jakub Kicinski <[email protected]>
tcp: ensure PMTU updates are processed during fastopen

Jeremy Linton <[email protected]>
net: bcmgenet: Use stronger register read/writes to assure ordering

Bjorn Helgaas <[email protected]>
PCI: Avoid broken MSI on SB600 USB devices

Yafang Shao <[email protected]>
bpftool: Fix print error when show bpf map

Hangbin Liu <[email protected]>
selftests/bpf/test_lirc_mode2.sh: Exit with proper code

Lucas De Marchi <[email protected]>
drm/i915: Fix renamed struct field

Duoming Zhou <[email protected]>
ax25: Fix NULL pointer dereferences in ax25 timers

Duoming Zhou <[email protected]>
ax25: Fix refcount leaks caused by ax25_cb_del()

Michael Ellerman <[email protected]>
powerpc/pseries: Fix use after free in remove_phb_dynamic()

Peter Rosin <[email protected]>
i2c: mux: demux-pinctrl: do not deactivate a master that is not active

Phil Sutter <[email protected]>
netfilter: conntrack: Add and use nf_ct_set_auto_assign_helper_warned()

Lucas Tanure <[email protected]>
i2c: meson: Fix wrong speed use from probe

Petr Machata <[email protected]>
af_netlink: Fix shift out of bounds in group mask calculation

Yonglong Li <[email protected]>
mptcp: Fix crash due to tcp_tsorted_anchor was initialized before release skb

Guillaume Nault <[email protected]>
ipv4: Fix route lookups when handling ICMP redirects and PMTU updates

Dan Carpenter <[email protected]>
RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit()

Yake Yang <[email protected]>
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt

Niels Dossche <[email protected]>
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed

Pavel Skripkin <[email protected]>
Bluetooth: hci_uart: add missing NULL check in h5_enqueue

Jakub Sitnicki <[email protected]>
selftests/bpf: Fix error reporting from sock_fields programs

Kuniyuki Iwashima <[email protected]>

    af_unix: Fix some data-races around unix_sk(sk)->oob_skb.

Sukadev Bhattiprolu <[email protected]>
ibmvnic: fix race between xmit and reset

Richard Zhu <[email protected]>
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present

Richard Zhu <[email protected]>
PCI: imx6: Invoke the PHY exit function after PHY power off

Hangbin Liu <[email protected]>
bareudp: use ipv6_mod_enabled to check if IPv6 enabled

Oliver Hartkopp <[email protected]>
can: isotp: support MSG_TRUNC flag when reading from socket

Oliver Hartkopp <[email protected]>
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket

Lorenzo Bianconi <[email protected]>

    mt76: mt7921: fix mt7921_queues_acq implementation

Pablo Neira Ayuso <[email protected]>
netfilter: flowtable: Fix QinQ and pppoe support for inet table

José Roberto de Souza <[email protected]>
drm/i915/display: Do not re-enable PSR after it was marked as not reliable

José Roberto de Souza <[email protected]>
drm/i915/display: Fix HPD short pulse handling for eDP

Nicholas Piggin <[email protected]>
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range

Randy Dunlap <[email protected]>
powerpc/xive: fix return value of __setup handler

Bob Pearson <[email protected]>
RDMA/rxe: Fix ref error in rxe_av.c

Chengguang Xu <[email protected]>
RDMA/rxe: Change variable and function argument to proper type

Nicholas Kazlauskas <[email protected]>
drm/amd/display: Fix double free during GPU reset on DC streams

Dan Carpenter <[email protected]>
USB: storage: ums-realtek: fix error code in rts51x_read_mem()

Niklas Söderlund <[email protected]>
samples/bpf, xdpsock: Fix race when running for fix duration of time

Wang Yufen <[email protected]>
bpf, sockmap: Fix double uncharge the mem of sk_msg

Wang Yufen <[email protected]>
bpf, sockmap: Fix more uncharged while msg has more_data

Wang Yufen <[email protected]>
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full

Wang Yufen <[email protected]>
bpf, sockmap: Fix memleak in sk_psock_queue_msg

Yongzhi Liu <[email protected]>
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine

Leon Romanovsky <[email protected]>
Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error"

Dan Carpenter <[email protected]>
RDMA/irdma: Prevent some integer underflows

Linus Walleij <[email protected]>
power: ab8500_chargalg: Use CLOCK_MONOTONIC

Xin Xiong <[email protected]>
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init

Yaliang Wang <[email protected]>
MIPS: pgalloc: fix memory leak caused by pgd_free()

Randy Dunlap <[email protected]>
MIPS: RB532: fix return value of __setup handler

Miaoqian Lin <[email protected]>
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base

Miaoqian Lin <[email protected]>
ath10k: Fix error handling in ath10k_setup_msa_resources

Oliver Hartkopp <[email protected]>
vxcan: enable local echo for sent CAN frames

Johannes Berg <[email protected]>
iwlwifi: pcie: fix SW error MSI-X mapping

Max Filippov <[email protected]>
xtensa: add missing XCHAL_HAVE_WINDOWED check

Hangyu Hua <[email protected]>
powerpc: 8xx: fix a return value error in mpc8xx_pic_init

Sreekanth Reddy <[email protected]>
scsi: mpt3sas: Fix incorrect 4GB boundary check

Jia-Ju Bai <[email protected]>
platform/x86: huawei-wmi: check the return value of device_create_file()

Felix Maurer <[email protected]>
selftests/bpf: Make test_lwt_ip_encap more stable and faster

lic121 <[email protected]>
libbpf: Unmap rings when umem deleted

Jiasheng Jiang <[email protected]>
mfd: mc13xxx: Add check for mc13xxx_irq_request

Michael Ellerman <[email protected]>
powerpc/64s: Don't use DSISR for SLB faults

Jakob Koschel <[email protected]>
powerpc/sysdev: fix incorrect use to determine if list is empty

Maciej W. Rozycki <[email protected]>
MIPS: Sanitise Cavium switch cases in TLB handler synthesizers

Randy Dunlap <[email protected]>
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n

Rob Clark <[email protected]>
drm/msm/a6xx: Fix missing ARRAY_SIZE() check

Robert Hancock <[email protected]>
net: axienet: fix RX ring refill allocation failure handling

Mark Tomlinson <[email protected]>
PCI: Reduce warnings on possible RW1C corruption

Yajun Deng <[email protected]>
RDMA/core: Fix ib_qp_usecnt_dec() called when error

Mike Marciniszyn <[email protected]>
IB/hfi1: Allow larger MTU without AIP

Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Add missing free in free_charger_irq

Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Handle error for wm8350_register_irq

Radoslaw Biernacki <[email protected]>
Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()

Tom Rix <[email protected]>
Bluetooth: hci_sync: fix undefined return of hci_disconnect_all_sync()

Divya Koppera <[email protected]>
net: phy: micrel: Fix concurrent register access

Robert Hancock <[email protected]>
i2c: xiic: Make bus names unique

Mark Brown <[email protected]>

    KVM: arm64: Enable Cortex-A510 erratum 2077057 by default

Anssi Hannula <[email protected]>
hv_balloon: rate-limit "Unhandled message" warning

Sean Christopherson <[email protected]>
KVM: SVM: Exit to userspace on ENOMEM/EFAULT GHCB errors

Hou Wenlong <[email protected]>
KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()

Zhenzhong Duan <[email protected]>
KVM: x86: Fix emulation in writing cr8

Michael Ellerman <[email protected]>
powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit

Daniel Henrique Barboza <[email protected]>
powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()

Xu Kuohai <[email protected]>
libbpf: Skip forward declaration when counting duplicated type names

Christophe JAILLET <[email protected]>
gpu: host1x: Fix a memory leak in 'host1x_remove()'

Christophe JAILLET <[email protected]>
gpu: host1x: Fix an error handling path in 'host1x_probe()'

Stijn Tintel <[email protected]>
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning

Mustafa Ismail <[email protected]>
RDMA/irdma: Remove incorrect masking of PD

Mustafa Ismail <[email protected]>
RDMA/irdma: Fix Passthrough mode in VM

Mustafa Ismail <[email protected]>
RDMA/irdma: Fix netdev notifications for vlan's

Magnus Karlsson <[email protected]>
xsk: Fix race at socket teardown

Hou Tao <[email protected]>
bpf, arm64: Feed byte-offset into bpf line info

Hou Tao <[email protected]>
bpf, arm64: Call build_prologue() first in first JIT pass

Nishanth Menon <[email protected]>
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt

Xiang Chen <[email protected]>
scsi: hisi_sas: Change permission of parameter prot_mask

Hans de Goede <[email protected]>
power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return

Miaoqian Lin <[email protected]>
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe

Zhang Yi <[email protected]>
ext2: correct max file size computing

Kees Cook <[email protected]>
drm/dp: Fix OOB read when handling Post Cursor2 register

MeiChia Chiu <[email protected]>
mt76: mt7915: fix the muru tlv issue

Bo Jiao <[email protected]>

    mt76: mt7915: enlarge wcid size to 544

Christophe JAILLET <[email protected]>
power: supply: sbs-charger: Don't cancel work that is not initialized

Randy Dunlap <[email protected]>
TOMOYO: fix __setup handlers return values

Maíra Canal <[email protected]>
drm/amd/display: Remove vupdate_int_entry definition

Aharon Landau <[email protected]>
RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR

Luiz Angelo Daros de Luca <[email protected]>
net: dsa: realtek-smi: move to subdirectory

Luiz Angelo Daros de Luca <[email protected]>
net: dsa: realtek-smi: fix kdoc warnings

Deren Wu <[email protected]>

    mt76: mt7921s: fix missing fc type/sub-type for 802.11 pkts

Lorenzo Bianconi <[email protected]>
mt76: fix endianness errors in reverse_frag0_hdr_trans

Lorenzo Bianconi <[email protected]>
mt76: do not always copy ethhdr in reverse_frag0_hdr_trans

Damien Le Moal <[email protected]>
scsi: pm8001: Fix abort all task initialization

Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command completion handling

Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command task initialization

Damien Le Moal <[email protected]>

    scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()

Damien Le Moal <[email protected]>

    scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()

Damien Le Moal <[email protected]>

    scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()

Damien Le Moal <[email protected]>

    scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()

Damien Le Moal <[email protected]>

    scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()

Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm80XX_send_read_log()

Bart Van Assche <[email protected]>
scsi: fnic: Fix a tracing statement

Abhishek Sahu <[email protected]>
vfio/pci: wake-up devices around reset functions

Abhishek Sahu <[email protected]>
vfio/pci: fix memory leak during D3hot to D0 transition

Aashish Sharma <[email protected]>
dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS

Nemanja Rakovic <[email protected]>
mips: Enable KCSAN

Rameshkumar Sundaram <[email protected]>
ath11k: Invalidate cached reo ring entry before accessing it

Alexander Lobakin <[email protected]>
i40e: remove dead stores on XSK hotpath

Dmitry Baryshkov <[email protected]>
drm/msm/dp: fix panel bridge attachment

Dmitry Baryshkov <[email protected]>
drm/msm/dpu: remove msm_dp cached in dpu_encoder_virt

Dmitry Baryshkov <[email protected]>
drm/msm/dpu: fix dp audio condition

Dmitry Baryshkov <[email protected]>
drm/msm/dpu: add DSPP blocks teardown

Dmitry Baryshkov <[email protected]>
drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode

Marijn Suijten <[email protected]>
drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent

Kuogee Hsieh <[email protected]>
drm/msm/dp: always add fail-safe mode into connector mode list

Kuogee Hsieh <[email protected]>
drm/msm/dp: stop link training after link training 2 failed

Kuogee Hsieh <[email protected]>
drm/msm/dp: populate connector of struct dp_panel

Kuogee Hsieh <[email protected]>
drm/msm/dp: do not initialize phy until plugin interrupt received

Amit Kumar Mahapatra <[email protected]>
mtd: rawnand: pl353: Set the nand chip node as the flash node

Dan Carpenter <[email protected]>
iwlwifi: mvm: Fix an error code in iwl_mvm_up()

Colin Ian King <[email protected]>
iwlwifi: Fix -EIO error code that is never returned

Dan Carpenter <[email protected]>
iwlwifi: mvm: fix off by one in iwl_mvm_stat_iterator_all_macs()

Mukesh Sisodiya <[email protected]>
iwlwifi: yoyo: Avoid using dram data if allocation failed

Rotem Saado <[email protected]>
iwlwifi: yoyo: remove DBGI_SRAM address reset writing

Johannes Berg <[email protected]>
iwlwifi: mvm: align locking in D3 test debugfs

Luca Coelho <[email protected]>
iwlwifi: mvm: don't iterate unadded vifs when handling FW SMPS req

Takashi Iwai <[email protected]>
iwlwifi: mvm: Don't call iwl_mvm_sta_from_mac80211() with NULL sta

Geliang Tang <[email protected]>
selftests: mptcp: add csum mib check for mptcp_connect

Tong Zhang <[email protected]>
dax: make sure inodes are flushed before destroy cache

Dan Williams <[email protected]>
cxl/port: Hold port reference until decoder release

Dan Williams <[email protected]>
cxl/core/port: Rename bus.c to port.c

Håkon Bugge <[email protected]>
IB/cma: Allow XRC INI QPs to set their local ACK timeout

Andrii Nakryiko <[email protected]>
libbpf: Fix memleak in libbpf_netlink_recv()

Jiri Olsa <[email protected]>
bpftool: Fix pretty print dump for maps without BTF loaded

Roman Li <[email protected]>
drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug

Yiqing Yao <[email protected]>
drm/amd/pm: enable pm sysfs write for one VF mode

Yinjun Zhang <[email protected]>
bpftool: Fix the error when lookup in no-btf maps

Martin Povišer <[email protected]>
i2c: pasemi: Drop I2C classes from platform driver variant

Wen Gong <[email protected]>
ath11k: fix uninitialized rate_idx in ath11k_dp_tx_update_txcompl()

Pin-Yen Lin <[email protected]>
drm/bridge: anx7625: Fix overflow issue on reading EDID

Jiasheng Jiang <[email protected]>
iommu/ipmmu-vmsa: Check for error num after setting mask

Dmitry Torokhov <[email protected]>
HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports

Miaoqian Lin <[email protected]>
power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init

Toke Høiland-Jørgensen <[email protected]>
libbpf: Use dynamically allocated buffer when receiving netlink messages

Andrii Nakryiko <[email protected]>
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0

Linus Walleij <[email protected]>
power: supply: ab8500: Swap max and overvoltage

Neil Armstrong <[email protected]>
drm/bridge: dw-hdmi: use safe format when first in bridge chain

Dan Carpenter <[email protected]>
rtw88: fix use after free in rtw_hw_scan_update_probe_req()

Andrii Nakryiko <[email protected]>
libbpf: Fix compilation warning due to mismatched printf format

Po Liu <[email protected]>
net:enetc: allocate CBD ring data memory using DMA coherent methods

Tianyu Lan <[email protected]>
Netvsc: Call hv_unmap_memory() in the netvsc_device_remove()

Jonathan Cameron <[email protected]>
cxl/regs: Fix size of CXL Capability Header Register

Dan Williams <[email protected]>
tools/testing/cxl: Fix root port to host bridge assignment

Dan Williams <[email protected]>
cxl/core: Fix cxl_probe_component_regs() error message

Ilya Leoshkevich <[email protected]>
libbpf: Fix riscv register names

Dan Carpenter <[email protected]>
libbpf: Fix signedness bug in btf_dump_array_data()

Xiao Yang <[email protected]>
RDMA/rxe: Check the last packet by RXE_END_MASK

Pali Rohár <[email protected]>
PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge

Pali Rohár <[email protected]>
PCI: aardvark: Fix reading MSI interrupt number

Luben Tuikov <[email protected]>
drm/amdgpu: Don't offset by 2 in FRU EEPROM

Corinna Vinschen <[email protected]>
igb: refactor XDP registration

Corinna Vinschen <[email protected]>
igc: avoid kernel warning when changing RX ring parameters

Naveen N. Rao <[email protected]>
selftests/bpf: Use "__se_" prefix on architectures without syscall wrapper

Kenta Tada <[email protected]>
selftests/bpf: Extract syscall wrapper

Mark Brown <[email protected]>
mtd: mchp48l640: Add SPI ID table

Mark Brown <[email protected]>
mtd: mchp23k256: Add SPI ID table

Christophe JAILLET <[email protected]>

    i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()'

Pavel Skripkin <[email protected]>
net: asix: add proper error handling of usb read errors

Christophe Leroy <[email protected]>
livepatch: Fix build failure on 32 bits processors

Thomas Bracht Laumann Jespersen <[email protected]>
scripts/dtc: Call pkg-config POSIXly correct

Johannes Berg <[email protected]>
mac80211: limit bandwidth in HE capabilities

Yonghong Song <[email protected]>
bpf: Fix a btf decl_tag bug when tagging a function

Tobias Waldekranz <[email protected]>
net: dsa: mv88e6xxx: Enable port policy support on 6097

Miroslav Lichvar <[email protected]>
ptp: unregister virtual clocks when unregistering physical clock.

MeiChia Chiu <[email protected]>
mt76: mt7915: fix the nss setting in bitrates

Peter Chiu <[email protected]>

    mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs()

Lorenzo Bianconi <[email protected]>
mt76: mt7921s: fix a possible memory leak in mt7921_load_patch

Lorenzo Bianconi <[email protected]>
mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta

Lorenzo Bianconi <[email protected]>

    mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update

Lorenzo Bianconi <[email protected]>

    mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update

Sean Wang <[email protected]>
mt76: mt7921e: fix possible probe failure after reboot

Leon Yen <[email protected]>

    mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrl

Peter Chiu <[email protected]>

    mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb()

Peter Chiu <[email protected]>

    mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb()

Lorenzo Bianconi <[email protected]>
mt76: mt7615: fix a leftover race in runtime-pm

Lorenzo Bianconi <[email protected]>
mt76: mt7921: fix a leftover race in runtime-pm

Lorenzo Bianconi <[email protected]>
mt76: mt7921: do not always disable fw runtime-pm

Sean Wang <[email protected]>
mt76: mt7921: set EDCA parameters with the MCU CE command

Sean Wang <[email protected]>
mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error

Lorenzo Bianconi <[email protected]>

    mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv

Lorenzo Bianconi <[email protected]>
mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode

Lorenzo Bianconi <[email protected]>
mt76: connac: fix sta_rec_wtbl tag len

Athira Rajeev <[email protected]>
powerpc/perf: Don't use perf_hw_context for trace IMC PMU

Fabiano Rosas <[email protected]>
KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init

Maxim Kiselev <[email protected]>
powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

Jiasheng Jiang <[email protected]>
ray_cs: Check ioremap return value

Miaoqian Lin <[email protected]>
power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe

Alexander Lobakin <[email protected]>
ixgbe: respect metadata on XSK Rx to skb

Alexander Lobakin <[email protected]>
ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Alexander Lobakin <[email protected]>

    ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly

Alexander Lobakin <[email protected]>
igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Alexander Lobakin <[email protected]>
ice: respect metadata on XSK Rx to skb

Alexander Lobakin <[email protected]>
ice: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Alexander Lobakin <[email protected]>
i40e: respect metadata on XSK Rx to skb

Alexander Lobakin <[email protected]>
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

Christophe JAILLET <[email protected]>
drm/bridge: lt9611: Fix an error handling path in lt9611_probe()

Po-Hao Huang <[email protected]>
rtw88: fix memory overrun and memory leak during hw_scan

Po-Hao Huang <[email protected]>
rtw88: fix idle mode flow for hw scan

Muhammad Usama Anjum <[email protected]>
rtw88: check for validity before using a pointer

Gerhard Engleder <[email protected]>
selftests/net: timestamping: Fix bind_phc check

Fabiano Rosas <[email protected]>
KVM: PPC: Fix vmx/vsx mixup in mmio emulation

Maor Gottlieb <[email protected]>
RDMA/core: Set MR type in ib_reg_user_mr

Wen Gong <[email protected]>
ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz

Pavel Skripkin <[email protected]>
ath9k_htc: fix uninit value bugs

Hangbin Liu <[email protected]>
selftests/bpf/test_xdp_redirect_multi: use temp netns for testing

Robert Hancock <[email protected]>
net: phy: at803x: move page selection fix to config_init

Tom Rix <[email protected]>
drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function

Zhou Qingyang <[email protected]>
drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()

Nicholas Kazlauskas <[email protected]>
drm/amd/display: Call dc_stream_release for remove link enc assignment

Zhou Qingyang <[email protected]>
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()

Luiz Augusto von Dentz <[email protected]>
Bluetooth: hci_event: Fix HCI_EV_VENDOR max_len

Tobias Waldekranz <[email protected]>
net: dsa: Avoid cross-chip syncing of VLAN filtering

Tobias Waldekranz <[email protected]>
net: dsa: Move VLAN filtering syncing out of dsa_switch_bridge_leave

Brett Creeley <[email protected]>
ionic: Correctly print AQ errors if completions aren't received

Shannon Nelson <[email protected]>
ionic: fix up printing of timeout error

Brett Creeley <[email protected]>
ionic: Don't send reset commands if FW isn't running

Shannon Nelson <[email protected]>
ionic: start watchdog after all is setup

Shannon Nelson <[email protected]>
ionic: fix type complaint in ionic_dev_cmd_clean()

Maxime Ripard <[email protected]>
drm/edid: Split deep color modes between RGB and YUV444

Maxime Ripard <[email protected]>
drm/edid: Don't clear formats if using deep color

Magnus Karlsson <[email protected]>
selftests, xsk: Fix rx_full stats test

Dario Binacchi <[email protected]>
mtd: rawnand: gpmi: fix controller timings setting

Jiasheng Jiang <[email protected]>
mtd: onenand: Check for error irq

Sean Wang <[email protected]>
Bluetooth: btmtksdio: mask out interrupt status

Mark Chen <[email protected]>

    Bluetooth: mt7921s: fix btmtksdio_[drv|fw]_pmctrl()

Mark Chen <[email protected]>
Bluetooth: btmtksdio: refactor btmtksdio_runtime_[suspend|resume]()

Mark Chen <[email protected]>
Bluetooth: mt7921s: fix bus hang with wrong privilege

Mark Chen <[email protected]>
Bluetooth: mt7921s: fix firmware coredump retrieve

Pavel Skripkin <[email protected]>

    Bluetooth: hci_serdev: call init_rwsem() before p->open()

Tedd Ho-Jeong An <[email protected]>
Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products

Felix Maurer <[email protected]>
selftests: bpf: Fix bind on used port

Jani Nikula <[email protected]>
drm/locking: fix drm_modeset_acquire_ctx kernel-doc

José Expósito <[email protected]>
drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode

Kumar Kartikeya Dwivedi <[email protected]>
bpf: Fix UAF due to race between btf_try_get_module and load_module

Pavel Skripkin <[email protected]>

    udmabuf: validate ubuf->pagecount

Dan Carpenter <[email protected]>
ath11k: fix error code in ath11k_qmi_assign_target_mem_chunk()

Wei Fu <[email protected]>

    bpftool: Only set obj->skeleton on complete success

Yafang Shao <[email protected]>
libbpf: Fix possible NULL pointer dereference when destroying skeleton

Mauricio Vásquez <[email protected]>
bpftool: Fix error check when calling hashmap__new()

Jiasheng Jiang <[email protected]>
drm/panfrost: Check for error num after setting mask

Wen Gong <[email protected]>
ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855

Dan Carpenter <[email protected]>
Bluetooth: hci_sync: unlock on error in hci_inquiry_result_with_rssi_evt()

Jiasheng Jiang <[email protected]>
drm/v3d/v3d_drv: Check for error num after setting mask

Wen Gong <[email protected]>
ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern

Yang Yingliang <[email protected]>
ath11k: add missing of_node_put() to avoid leak

Jagan Teki <[email protected]>
drm: bridge: adv7511: Fix ADV7535 HPD enablement

Miaoqian Lin <[email protected]>
drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe

Miaoqian Lin <[email protected]>
drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe

Miaoqian Lin <[email protected]>
drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev

Martin Blumenstingl <[email protected]>

    drm/meson: Fix error handling when afbcd.ops->init fails

Martin Blumenstingl <[email protected]>
drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops

Christophe JAILLET <[email protected]>
drm/bridge: sn65dsi83: Fix an error handling path in sn65dsi83_probe()

Andre Przywara <[email protected]>
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx

Andre Przywara <[email protected]>
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS

Meng Tang <[email protected]>
ASoC: amd: Fix reference to PCM buffer address

Miaoqian Lin <[email protected]>
ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data

Miaoqian Lin <[email protected]>

    ASoC: mediatek: mt8195: Fix error handling in mt8195_mt6359_rt1019_rt5682_dev_probe

Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe

Miaoqian Lin <[email protected]>
ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe

zhangqilong <[email protected]>
ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume

Daniel Bristot de Oliveira <[email protected]>
rtla/osnoise: Fix osnoise hist stop tracing message

Jiasheng Jiang <[email protected]>
mmc: davinci_mmc: Handle error for clk_enable

Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe

Kai Vehmanen <[email protected]>
ASoC: SOF: Intel: enable DMI L1 for playback streams

Wang Wensheng <[email protected]>
ASoC: imx-es8328: Fix error return code in imx_es8328_probe()

Shengjiu Wang <[email protected]>
ASoC: fsl_spdif: Disable TX clock when stop

Miaoqian Lin <[email protected]>
ASoC: mxs: Fix error handling in mxs_sgtl5000_probe

Codrin Ciubotariu <[email protected]>
ASoC: dmaengine: do not use a NULL prepare_slave_config() callback

Miaoqian Lin <[email protected]>
ASoC: rk817: Fix missing clk_disable_unprepare() in rk817_platform_probe

Miaoqian Lin <[email protected]>

    ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe

Miaoqian Lin <[email protected]>
ASoC: SOF: Add missing of_node_put() in imx8m_probe

Miaoqian Lin <[email protected]>
ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe

Miaoqian Lin <[email protected]>
ASoC: atmel: Fix error handling in snd_proto_probe

Hans Verkuil <[email protected]>
ivtv: fix incorrect device_caps for ivtvfb

Jakob Koschel <[email protected]>
media: saa7134: fix incorrect use to determine if list is empty

Miaoqian Lin <[email protected]>
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of

Jiasheng Jiang <[email protected]>
ASoC: fsi: Add check for clk_enable

Jiasheng Jiang <[email protected]>
ASoC: wm8350: Handle error for wm8350_register_irq

Miaoqian Lin <[email protected]>
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe

Lucas Tanure <[email protected]>
ASoC: cs35l41: Fix max number of TX channels

David Rhodes <[email protected]>
ASoC: cs35l41: Fix GPIO2 configuration

Jiasheng Jiang <[email protected]>
media: vidtv: Check for null return of vzalloc

Dafna Hirschfeld <[email protected]>
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED

Randy Dunlap <[email protected]>
m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined

Rob Herring <[email protected]>
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly

Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction

Jia-Ju Bai <[email protected]>
memory: emif: check the pointer temp in get_device_details()

Jiasheng Jiang <[email protected]>
memory: emif: Add check for setup_interrupts

Daniel Scally <[email protected]>
media: i2c: Fix pixel array positions in ov8865

Jiasheng Jiang <[email protected]>
ASoC: soc-compress: prevent the potentially use of null pointer

Jiasheng Jiang <[email protected]>
ASoC: dwc-i2s: Handle errors for clk_enable

Jiasheng Jiang <[email protected]>
ASoC: atmel_ssc_dai: Handle errors for clk_enable

Jiasheng Jiang <[email protected]>
ASoC: mxs-saif: Handle errors for clk_enable

Randy Dunlap <[email protected]>
printk: fix return value of printk.devkmsg __setup handler

Frank Wunderlich <[email protected]>
arm64: dts: broadcom: Fix sata nodename

Kuldeep Singh <[email protected]>
arm64: dts: ns2: Fix spi-cpol and spi-cpha property

Jiasheng Jiang <[email protected]>
ALSA: spi: Add check for clk_enable()

Jiasheng Jiang <[email protected]>
ASoC: ti: davinci-i2s: Add check for clk_enable()

Aswath Govindraju <[email protected]>
mmc: sdhci_am654: Fix the driver data of AM64 SoC

Chun-Jie Chen <[email protected]>
soc: mediatek: pm-domains: Add wakeup capacity support in power domain

Jia-Ju Bai <[email protected]>
ASoC: acp: check the return value of devm_kzalloc() in acp_legacy_dai_links_create()

Jia-Ju Bai <[email protected]>
ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()

Arnd Bergmann <[email protected]>
uaccess: fix nios2 and microblaze get_user_8()

Christophe Leroy <[email protected]>

    vsprintf: Fix %pK with kptr_restrict == 0

Muhammad Usama Anjum <[email protected]>
selftests/lkdtm: Add UBSAN config

Muhammad Usama Anjum <[email protected]>
selftests: vm: remove dependecy from internal kernel macros

Mirela Rabulea <[email protected]>
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated

Jernej Skrabec <[email protected]>
media: hantro: sunxi: Fix VP9 steps

Nicolas Dufresne <[email protected]>
media: v4l2-core: Initialize h264 scaling matrix

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: fix return value of wcd934x_rx_hph_mode_put

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: fix kcontrol max values

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd938x: fix kcontrol max values

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wc938x: fix accessing array out of bounds for enum type

Srinivas Kandagatla <[email protected]>
ASoC: codecs: va-macro: fix accessing array out of bounds for enum type

Srinivas Kandagatla <[email protected]>
ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type

Srinivas Kandagatla <[email protected]>
ASoC: codecs: rx-macro: fix accessing compander for aux

Keerthy <[email protected]>
arm64: dts: ti: k3-j721s2-mcu-wakeup: Fix the interrupt-parent for wkup_gpioX instances

Jernej Skrabec <[email protected]>
media: cedrus: h264: Fix neighbour info buffer size

Jernej Skrabec <[email protected]>
media: cedrus: H265: Fix neighbour info buffer size

Dan Carpenter <[email protected]>

    media: usb: go7007: s2250-board: fix leak in probe()

Yunfei Dong <[email protected]>
media: uapi: Init VP9 stateless decode params

Dongliang Mu <[email protected]>
media: em28xx: initialize refcount before kref_get

Zhou Qingyang <[email protected]>
media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats()

Tom Rix <[email protected]>
media: video/hdmi: handle short reads of hdmi info frame.

Neil Armstrong <[email protected]>
media: mexon-ge2d: fixup frames size in registers

Marek Vasut <[email protected]>
ARM: dts: imx: Add missing LVDS decoder on M53Menlo

Manivannan Sadhasivam <[email protected]>
ARM: dts: qcom: sdx55: Fix the address used for PCIe EP local addr space

Andy Shevchenko <[email protected]>
vsprintf: Fix potential unaligned access

Ard Biesheuvel <[email protected]>
ARM: ftrace: ensure that ADR takes the Thumb bit into account

Olivier Moysan <[email protected]>
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15

Paul Kocialkowski <[email protected]>
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order

Stephan Gerhold <[email protected]>
cpuidle: qcom-spm: Check if any CPU is managed by SPM

Miaoqian Lin <[email protected]>
soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe

Christophe JAILLET <[email protected]>
firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined

Baruch Siach <[email protected]>
arm64: dts: qcom: ipq6018: fix usb reference period

Petr Vorel <[email protected]>
arm64: dts: qcom: msm8994: Provide missing "xo_board" and "sleep_clk" to GCC

Maulik Shah <[email protected]>
arm64: dts: qcom: sm8450: Update cpuidle states parameters

Maulik Shah <[email protected]>
arm64: dts: qcom: sm8350: Correct TCS configuration for apps rsc

Maulik Shah <[email protected]>
arm64: dts: qcom: sm8150: Correct TCS configuration for apps rsc

Rafał Miłecki <[email protected]>
arm64: dts: broadcom: bcm4908: use proper TWD binding

Petr Vorel <[email protected]>

    arm64: dts: qcom: msm8916-j5: Fix typo

Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: sm8250: fix PCIe bindings to follow schema

David Heidelberg <[email protected]>
arm64: dts: qcom: sdm845: fix microphone bias properties and values

Daniel Thompson <[email protected]>
soc: qcom: aoss: remove spurious IRQF_ONESHOT flags

Miaoqian Lin <[email protected]>
soc: qcom: aoss: Fix missing put_device call in qmp_get

Miaoqian Lin <[email protected]>
soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem

Jiasheng Jiang <[email protected]>
soc: qcom: rpmpd: Check for null return of devm_kcalloc

Pavel Kubelun <[email protected]>
ARM: dts: qcom: ipq4019: fix sleep clock

Marijn Suijten <[email protected]>
firmware: qcom: scm: Remove reassignment to desc following initializer

Douglas Anderson <[email protected]>
arm64: dts: qcom: sc7280: Fix gmu unit address

Randy Dunlap <[email protected]>
ASoC: max98927: add missing header file

Zev Weiss <[email protected]>
ARM: dts: Fix OpenBMC flash layout label addresses

Dan Carpenter <[email protected]>
video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()

Dan Carpenter <[email protected]>
video: fbdev: atmel_lcdfb: fix an error code in atmel_lcdfb_probe()

Wang Hai <[email protected]>
video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()

YueHaibing <[email protected]>
video: fbdev: controlfb: Fix COMPILE_TEST build

Z. Liu <[email protected]>
video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen

Jammy Huang <[email protected]>
media: aspeed: Correct value for h-total-pixels

Bingbu Cao <[email protected]>
media: ov2740: identify module after subdev initialisation

Sakari Ailus <[email protected]>
media: ov5648: Don't pack controls struct

Sakari Ailus <[email protected]>
media: v4l: Avoid unaligned access warnings when printing 4cc modifiers

Janusz Krzysztofik <[email protected]>
media: ov6650: Fix set format try processing path

Chen-Yu Tsai <[email protected]>
media: hantro: Fix overfill bottom register field name

Jiasheng Jiang <[email protected]>
media: meson: vdec: potential dereference of null pointer

Miaoqian Lin <[email protected]>
media: coda: Fix missing put_device() call in coda_get_vdoa_data

Dmitry Osipenko <[email protected]>
memory: tegra20-emc: Correct memory device mask

Robert Hancock <[email protected]>
ASoC: simple-card-utils: Set sysclk on all components

Robert Hancock <[email protected]>
ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting

Jiasheng Jiang <[email protected]>
ASoC: codecs: Check for error pointer after calling devm_regmap_init_mmio

Lad Prabhakar <[email protected]>
ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively

Eugen Hristev <[email protected]>
media: atmel: atmel-sama7g5-isc: fix ispck leftover

Ondrej Zary <[email protected]>
media: bttv: fix WARNING regression on tunerless devices

Martin Kepplinger <[email protected]>
media: imx: imx8mq-mipi_csi2: fix system resume

Martin Kepplinger <[email protected]>
media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation

Jiasheng Jiang <[email protected]>
media: mtk-vcodec: potential dereference of null pointer

Chen-Yu Tsai <[email protected]>
media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls

Laurent Pinchart <[email protected]>
media: staging: media: imx: imx7-mipi-csis: Make subdev name unique

Jonathan Marek <[email protected]>
media: camss: vfe-170: fix "VFE halt timeout" error

Jonathan Marek <[email protected]>
media: camss: csid-170: set the right HALT_CMD when disabled

Jonathan Marek <[email protected]>
media: camss: csid-170: don't enable unused irqs

Jonathan Marek <[email protected]>
media: camss: csid-170: fix non-10bit formats

Corentin Labbe <[email protected]>
media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size

Sam Protsenko <[email protected]>
pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios

Peng Liu <[email protected]>
kunit: make kunit_test_timeout compatible with comment

David Hildenbrand <[email protected]>
drivers/base/memory: add memory block to memory group after registration succeeded

Guillaume Tucker <[email protected]>
selftests, x86: fix how check_cc.sh is being invoked

Shyam Prasad N <[email protected]>
cifs: use a different reconnect helper for non-cifsd threads

Fengnan Chang <[email protected]>
f2fs: fix compressed file start atomic write may cause data corruption

Dongliang Mu <[email protected]>
fs: erofs: add sanity check for kobject in erofs_unregister_sysfs

Matthew Wilcox (Oracle) <[email protected]>
iomap: Fix iomap_invalidatepage tracepoint

Filipe Manana <[email protected]>
btrfs: fix unexpected error path when reflinking an inline extent

Chao Yu <[email protected]>
f2fs: fix to avoid potential deadlock

Valentin Schneider <[email protected]>
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race

Chengming Zhou <[email protected]>
sched/cpuacct: Fix charge percpu cpuusage

Amir Goldstein <[email protected]>
nfsd: more robust allocation failure handling in nfsd_file_cache_init

Lukas Czerner <[email protected]>
ext4: fix remount with 'abort' option

Jaegeuk Kim <[email protected]>
f2fs: fix missing free nid in f2fs_handle_failed_inode

Mel Gorman <[email protected]>
sched/fair: Improve consistency of allowed NUMA balance calculations

Adrian Hunter <[email protected]>
perf/x86/intel/pt: Fix address filter config for 32-bit kernel

Adrian Hunter <[email protected]>
perf/core: Fix address filter parser for multiple filters

Mathieu Desnoyers <[email protected]>
rseq: Remove broken uapi field layout on 32-bit little endian

Qais Yousef <[email protected]>
sched/uclamp: Fix iowait boost escaping uclamp restriction

Qais Yousef <[email protected]>
sched/sugov: Ignore 'busy' filter when rq is capped by uclamp_max

Qais Yousef <[email protected]>
sched/core: Export pelt_thermal_tp

Bharata B Rao <[email protected]>
sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa

Chao Yu <[email protected]>
f2fs: fix to enable ATGC correctly via gc_idle sysfs interface

David Howells <[email protected]>
watch_queue: Actually free the watch

David Howells <[email protected]>
watch_queue: Fix NULL dereference in error cleanup

Jens Axboe <[email protected]>
io_uring: terminate manual loop iterator loop correctly for non-vecs

Jens Axboe <[email protected]>

    io_uring: don't check unrelated req->open.how in accept request

Randy Dunlap <[email protected]>
clocksource: acpi_pm: fix return value of __setup handler

Brandon Wyman <[email protected]>
hwmon: (pmbus) Add Vin unit off handling

Miaoqian Lin <[email protected]>
hwrng: nomadik - Change clk_disable to clk_disable_unprepare

Giovanni Cabiddu <[email protected]>
crypto: qat - fix initialization of pfvf rts_map_msg structures

Giovanni Cabiddu <[email protected]>
crypto: qat - fix initialization of pfvf cap_msg structures

Jianglei Nie <[email protected]>
crypto: ccree - Fix use after free in cc_cipher_exit()

Dāvis Mosāns <[email protected]>
crypto: ccp - ccp_dmaengine_unregister release dma channels

Randy Dunlap <[email protected]>
ACPI: APEI: fix return value of __setup handlers

Dave Kleikamp <[email protected]>
KEYS: trusted: Avoid calling null function trusted_key_exit

Andreas Rammhold <[email protected]>
KEYS: trusted: Fix trusted key backends when building as module

Robin Murphy <[email protected]>
perf/arm-cmn: Update watchpoint format

Robin Murphy <[email protected]>
perf/arm-cmn: Hide XP PUB events for CMN-600

Mark Rutland <[email protected]>
arm64: prevent instrumentation of bp hardening callbacks

Guillaume Ranquet <[email protected]>
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()

Claudiu Beznea <[email protected]>
clocksource/drivers/timer-microchip-pit64b: Use notrace

Krzysztof Kozlowski <[email protected]>
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts

Drew Fustini <[email protected]>
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix

Petr Vorel <[email protected]>
crypto: vmx - add missing dependencies

Corentin Labbe <[email protected]>
crypto: gemini - call finalize with bh disabled

Corentin Labbe <[email protected]>
crypto: amlogic - call finalize with bh disabled

Corentin Labbe <[email protected]>
crypto: sun8i-ce - call finalize with bh disabled

Corentin Labbe <[email protected]>
crypto: sun8i-ss - call finalize with bh disabled

Claudiu Beznea <[email protected]>
hwrng: atmel - disable trng on failure path

Jiasheng Jiang <[email protected]>
spi: spi-zynqmp-gqspi: Handle error for dma_set_mask

Randy Dunlap <[email protected]>
PM: suspend: fix return value of __setup handler

Randy Dunlap <[email protected]>
PM: hibernate: fix __setup handler error handling

Eric Biggers <[email protected]>
block: don't delete queue kobject before its children

Christoph Hellwig <[email protected]>
nvme: fix the check for duplicate unique identifiers

Christoph Hellwig <[email protected]>
nvme: cleanup __nvme_check_ids

Armin Wolf <[email protected]>
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING

Patrick Rudolph <[email protected]>
hwmon: (pmbus) Add mutex to regulator ops

Andy Shevchenko <[email protected]>
spi: pxa2xx-pci: Balance reference count for PCI DMA device

Kai Ye <[email protected]>
crypto: hisilicon/sec - fix the aead software fallback for engine

Gilad Ben-Yossef <[email protected]>
crypto: ccree - don't attempt 0 len DMA mappings

Randy Dunlap <[email protected]>
EVM: fix the evm= __setup handler return value

Richard Guy Briggs <[email protected]>
audit: log AUDIT_TIME_* records only from rules

Zhang Wensheng <[email protected]>
block: update io_ticks when io hang

Corentin Labbe <[email protected]>
crypto: rockchip - ECB does not need IV

Muhammad Usama Anjum <[email protected]>
selftests/sgx: Treat CC as one argument

Muhammad Usama Anjum <[email protected]>
selftests/x86: Add validity check and allow field splitting

Chengming Zhou <[email protected]>
blk-cgroup: set blkg iostat after percpu stat aggregation

Ondrej Mosnacek <[email protected]>
security: implement sctp_assoc_established hook in selinux

Ondrej Mosnacek <[email protected]>
security: add sctp_assoc_established hook

Jianyong Wu <[email protected]>
arm64/mm: avoid fixmap race condition when create pud mapping

Marco Elver <[email protected]>
stack: Constrain and fix stack offset randomization with Clang builds

Reinette Chatre <[email protected]>
selftests/sgx: Ensure enclave data available during debug print

Reinette Chatre <[email protected]>
selftests/sgx: Do not attempt enclave build without valid enclave

Reinette Chatre <[email protected]>
selftests/sgx: Fix NULL-pointer-dereference upon early test failure

Geert Uytterhoeven <[email protected]>
perf: MARVELL_CN10K_TAD_PMU should depend on ARCH_THUNDER

Miaoqian Lin <[email protected]>
spi: tegra210-quad: Fix missin IRQ check in tegra_qspi_probe

Miaoqian Lin <[email protected]>
spi: tegra114: Add missing IRQ check in tegra_spi_probe

Shijith Thotton <[email protected]>
crypto: octeontx2 - remove CONFIG_DM_CRYPT check

Jiasheng Jiang <[email protected]>

    thermal: int340x: Check for NULL after calling kmemdup()

Scott Mayhew <[email protected]>
selinux: Fix selinux_sb_mnt_opts_compat()

Tomas Paukrt <[email protected]>
crypto: mxs-dcp - Fix scatterlist processing

Shijith Thotton <[email protected]>
crypto: octeontx2 - select CONFIG_NET_DEVLINK

Herbert Xu <[email protected]>
crypto: authenc - Fix sleep in atomic context in decrypt_tail

Giovanni Cabiddu <[email protected]>
crypto: qat - fix access to PFVF interrupt registers for GEN4

Herbert Xu <[email protected]>
crypto: kdf - Select hmac in addition to sha256

Corentin Labbe <[email protected]>
crypto: sun8i-ss - really disable hash on A80

Geert Uytterhoeven <[email protected]>
hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER

Dan Carpenter <[email protected]>
crypto: qat - fix a signedness bug in get_service_enabled()

Peter Gonda <[email protected]>
crypto: ccp - Ensure psp_ret is always init'd in __sev_platform_init_locked()

Christian Göttsche <[email protected]>
selinux: check return value of sel_make_avc_files

GONG, Ruiqi <[email protected]>
selinux: access superblock_security_struct in LSM blob way

kernel test robot <[email protected]>
regulator: qcom_smd: fix for_each_child.cocci warnings

Marc Zyngier <[email protected]>
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"

Marc Zyngier <[email protected]>
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"

Liguang Zhang <[email protected]>
PCI: pciehp: Clear cmd_busy bit in polling mode

Fabio Estevam <[email protected]>
PCI: imx6: Allow to probe when dw_pcie_wait_for_link() fails

Mastan Katragadda <[email protected]>
drm/i915/gem: add missing boundary check in vm_access

Jani Nikula <[email protected]>
drm/i915/opregion: check port number bounds for SWSCI display power state

Hector Martin <[email protected]>
brcmfmac: pcie: Fix crashes due to early IRQs

Hector Martin <[email protected]>
brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio

Hector Martin <[email protected]>
brcmfmac: pcie: Declare missing firmware files in pcie.c

Hector Martin <[email protected]>
brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path

Hector Martin <[email protected]>
brcmfmac: firmware: Allocate space for default boardrev in nvram

Thomas Zimmermann <[email protected]>
drm/fb-helper: Mark screen buffers in system memory with FBINFO_VIRTFB

Lyude Paul <[email protected]>
drm/nouveau/backlight: Just set all backlight types as RAW

Lyude Paul <[email protected]>
drm/nouveau/backlight: Fix LVDS backlight detection on some laptops

Christian König <[email protected]>
drm/syncobj: flatten dma_fence_chains on transfer

Claudio Imbrenda <[email protected]>

    KVM: s390x: fix SCK locking

Max Filippov <[email protected]>
xtensa: fix xtensa_wsr always writing 0

Max Filippov <[email protected]>
xtensa: fix stop_machine_cpuslocked call in patch_text

Max Filippov <[email protected]>
xtensa: define update_mmu_tlb function

Qu Wenruo <[email protected]>
btrfs: verify the tranisd of the to-be-written dirty extent buffer

Niels Dossche <[email protected]>
btrfs: extend locking to all space_info members accesses

Naohiro Aota <[email protected]>
btrfs: zoned: mark relocation as writing

Paul Cercueil <[email protected]>
mips: Always permit to build u-boot images

Johan Hovold <[email protected]>
media: davinci: vpif: fix use-after-free on driver unbind

Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM enable

Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM get

Stanimir Varbanov <[email protected]>
media: venus: venc: Fix h264 8x8 transform control

Stanimir Varbanov <[email protected]>
media: venus: hfi_cmds: List HDR10 property as unsupported for v1 and v3

Ameer Hamza <[email protected]>
media: venus: vdec: fixed possible memory leak issue

Kees Cook <[email protected]>
media: omap3isp: Use struct_group() for memcpy() region

Sean Young <[email protected]>
media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PC

Maciej W. Rozycki <[email protected]>
DEC: Limit PMAX memory probing to R3k systems

Shawn Guo <[email protected]>
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()

Mingzhe Zou <[email protected]>
bcache: fixup multiple threads crash

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - restore signature length check

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - correctly get hash from source scatterlist

Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - only allow with rsa

Kees Cook <[email protected]>
exec: Force single empty string when argv is empty

Dirk Müller <[email protected]>
lib/raid6/test: fix multiple definition linking error

Srinivas Pandruvada <[email protected]>

    thermal: int340x: Increase bitmap size

Jann Horn <[email protected]>
pstore: Don't use semaphores in always-atomic-context code

Colin Ian King <[email protected]>
carl9170: fix missing bit-wise or operator for tx_params

Jocelyn Falempe <[email protected]>
mgag200 fix memmapsl configuration in GCTL6 register

Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5420

Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5250

Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix UART3 pins configuration in Exynos5250

Tudor Ambarus <[email protected]>
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size

Tudor Ambarus <[email protected]>
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes

Johannes Berg <[email protected]>
rfkill: make new event layout opt-in

Michael Schmitz <[email protected]>
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix

Helge Deller <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_read()

Thomas Zimmermann <[email protected]>
fbdev: Hot-unplug firmware fb devices on forced removal

Cooper Chiou <[email protected]>
drm/edid: check basic audio support on CEA extension block

Tejun Heo <[email protected]>
block: don't merge across cgroup boundaries if blkcg is enabled

Shin'ichiro Kawasaki <[email protected]>
block: limit request dispatch loop duration

Tejun Heo <[email protected]>
block: fix rq-qos breakage from skipping rq_qos_done_bio()

Nikolay Borisov <[email protected]>
btrfs: zoned: put block group after final usage

Pekka Pessi <[email protected]>
mailbox: tegra-hsp: Flush whole channel

Christian Brauner <[email protected]>
landlock: Use square brackets around "landlock-ruleset"

Tom Rix <[email protected]>
samples/landlock: Fix path_list memory leak

Ojaswin Mujoo <[email protected]>
ext4: make mb_optimize_scan performance mount option work with extents

Ojaswin Mujoo <[email protected]>
ext4: make mb_optimize_scan option work with set/unset mount cmd

Ye Bin <[email protected]>
ext4: fix fs corruption when tring to remove a non-empty directory with IO error

Ritesh Harjani <[email protected]>
ext4: fix ext4_fc_stats trace point

Jann Horn <[email protected]>
coredump: Also dump first pages of non-executable ELF libraries

Sakari Ailus <[email protected]>
ACPI: properties: Consistently return -ENOENT if there are no more references

Rafael J. Wysocki <[email protected]>
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"

Sergey Shtylyov <[email protected]>
mmc: core: use sysfs_emit() instead of sprintf()

Ammar Faizi <[email protected]>
ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM

Nishanth Menon <[email protected]>

    arm64: dts: ti: k3-j721s2: Fix gic-v3 compatible regs

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs

Nishanth Menon <[email protected]>

    arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs

Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs

Manivannan Sadhasivam <[email protected]>
arm64: dts: qcom: sm8250: Fix MSI IRQ for PCIe1 and PCIe2

Vijay Balakrishna <[email protected]>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones

David Engraf <[email protected]>
arm64: signal: nofpsimd: Do not allocate fp/simd context when not available

Ben Dooks <[email protected]>
PCI: fu740: Force 2.5GT/s for initial device probe

Oliver Hartkopp <[email protected]>
can: isotp: sanitize CAN ID checks in isotp_bind()

Lars Ellenberg <[email protected]>
drbd: fix potential silent data corruption

Steven Rostedt (Google) <[email protected]>
tracing: Have trace event string test handle zero length strings

Mikulas Patocka <[email protected]>
dm integrity: set journal entry unused when shrinking device

Mike Snitzer <[email protected]>
dm: fix double accounting of flush with data

Mike Snitzer <[email protected]>
dm: interlock pending dm_io and dm_wait_for_bios_completion

Kirill Tkhai <[email protected]>
dm: fix use-after-free in dm_cleanup_zoned_dev()

Mike Snitzer <[email protected]>
dm stats: fix too short end duration_ns when using precise_timestamps

Kuan-Ying Lee <[email protected]>
mm/kmemleak: reset tag when compare object pointer

Oscar Salvador <[email protected]>
mm: only re-generate demotion targets when a numa node changes its N_CPU state

Rik van Riel <[email protected]>
mm,hwpoison: unmap poisoned page before invalidation

Charan Teja Kalla <[email protected]>
Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"

Charan Teja Kalla <[email protected]>
mm: madvise: return correct bytes advised with process_madvise

Charan Teja Kalla <[email protected]>
mm: madvise: skip unmapped vma holes passed to process_madvise

Hans de Goede <[email protected]>
drm/simpledrm: Add "panel orientation" property on non-upright mounted LCD panels

Joseph Qi <[email protected]>
ocfs2: fix crash when mount with quota enabled

Jens Axboe <[email protected]>
io_uring: ensure that fsnotify is always called

Ali Pouladi <[email protected]>
rtc: pl031: fix rtc features null pointer dereference

Mateusz Jończyk <[email protected]>

    rtc: mc146818-lib: fix locking in mc146818_set_time

Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020

Takashi Iwai <[email protected]>
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock

Mohan Kumar <[email protected]>
ALSA: hda: Avoid unsol event during RPM suspending

Xiaomeng Tong <[email protected]>
ALSA: cs4236: fix an incorrect NULL check on list iterator

Paulo Alcantara <[email protected]>
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()

Paulo Alcantara <[email protected]>
cifs: prevent bad output lengths in smb2_ioctl_query_info()

Xiaomeng Tong <[email protected]>
cifs: fix incorrect use of list iterator after the loop

Paulo Alcantara <[email protected]>
cifs: do not skip link targets when an I/O fails

José Expósito <[email protected]>
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"

Atish Patra <[email protected]>
RISC-V: Declare per cpu boot data as static

Dmitry Vyukov <[email protected]>
riscv: Increase stack size under KASAN

Nikita Shubin <[email protected]>
riscv: Fix fill_callchain return value

Niklas Cassel <[email protected]>
riscv: dts: canaan: Fix SPI3 bus width

Manish Chopra <[email protected]>
qed: validate and restrict untrusted VFs vlan promisc mode

Manish Chopra <[email protected]>
qed: display VF trust config

Damien Le Moal <[email protected]>
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands

James Smart <[email protected]>
scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters

Adrian Hunter <[email protected]>
scsi: ufs: Fix runtime PM messages never-ending cycle

Adrian Hunter <[email protected]>
scsi: core: sd: Add silence_suspend flag to suppress some PM messages

Hugh Dickins <[email protected]>
mempolicy: mbind_range() set_policy() after vma_merge()

Rik van Riel <[email protected]>
mm: invalidate hwpoison page cache page in fault path

Alistair Popple <[email protected]>
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node

Peter Xu <[email protected]>
mm: don't skip swap entry even if zap_details specified

Minchan Kim <[email protected]>
mm: fs: fix lru_cache_disabled race in bh_lru

Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_scan_medium

Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_do_mount_fs

Baokun Li <[email protected]>
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem

Hangyu Hua <[email protected]>
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path

Marc Kleine-Budde <[email protected]>
can: m_can: m_can_tx_handler(): fix use after free of skb

Hangyu Hua <[email protected]>
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path

Sean Nyekjaer <[email protected]>
mtd: rawnand: protect access to rawnand devices while in suspend

Tudor Ambarus <[email protected]>
mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

Miquel Raynal <[email protected]>
spi: mxic: Fix the transmit path

Damien Le Moal <[email protected]>
net: bnxt_ptp: fix compilation error

Krzysztof Kozlowski <[email protected]>
pinctrl: samsung: drop pin banks references on error paths

Aidan MacDonald <[email protected]>
pinctrl: ingenic: Fix regmap on X series SoCs

Miaohe Lin <[email protected]>
mm/mlock: fix two bugs in user_shm_lock()

Alistair Delva <[email protected]>
remoteproc: Fix count check in rproc_coredump_write()

Chao Yu <[email protected]>
f2fs: fix to do sanity check on .cp_pack_total_block_count

Juhyung Park <[email protected]>
f2fs: quota: fix loop condition at f2fs_quota_sync()

Chao Yu <[email protected]>
f2fs: fix to unlock page correctly in error path of is_alive()

Dan Carpenter <[email protected]>
NFSD: prevent integer overflow on 32 bit systems

Dan Carpenter <[email protected]>
NFSD: prevent underflow in nfssvc_decode_writeargs()

Trond Myklebust <[email protected]>
NFS: NFSv2/v3 clients should never be setting NFS_CAP_XATTR

Trond Myklebust <[email protected]>
SUNRPC: Do not dereference non-socket transports in sysfs

NeilBrown <[email protected]>
SUNRPC: avoid race between mod_timer() and del_timer_sync()

Gwendal Grignou <[email protected]>
HID: intel-ish-hid: Use dma_alloc_coherent for firmware update

Johan Hovold <[email protected]>
firmware: sysfb: fix platform-device leak in error path

Ang Tien Sung <[email protected]>
firmware: stratix10-svc: add missing callback parameter on RSU

Bagas Sanjaya <[email protected]>
Documentation: update stable tree link

Bagas Sanjaya <[email protected]>
Documentation: add link to stable release candidate tree

Eric Biggers <[email protected]>
KEYS: asymmetric: properly validate hash_algo and encoding

Eric Biggers <[email protected]>
KEYS: asymmetric: enforce that sig algo matches key algo

Eric Biggers <[email protected]>
KEYS: fix length validation in keyctl_pkey_params_get_2()

Ronnie Sahlberg <[email protected]>
cifs: we do not need a spinlock around the tree access during umount

Ronnie Sahlberg <[email protected]>
cifs: fix handlecache and multiuser

Ronnie Sahlberg <[email protected]>
cifs: truncate the inode and mapping when we simulate fcollapse

Jann Horn <[email protected]>
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE

Kunihiko Hayashi <[email protected]>
clk: uniphier: Fix fixed-rate initialization

Quentin Schulz <[email protected]>
clk: rockchip: re-add rational best approximation algorithm to the fractional divider

Dan Carpenter <[email protected]>
greybus: svc: fix an error handling bug in gb_svc_hello()

Liam Beguin <[email protected]>
iio: inkern: make a best effort on offset calculation

Liam Beguin <[email protected]>
iio: inkern: apply consumer scale when no channel scale is available

Liam Beguin <[email protected]>
iio: inkern: apply consumer scale on IIO_VAL_INT cases

Robert Hancock <[email protected]>
iio: adc: xilinx-ams: Fixed wrong sequencer register settings

Robert Hancock <[email protected]>
iio: adc: xilinx-ams: Fixed missing PS channels

Liam Beguin <[email protected]>
iio: afe: rescale: use s64 for temporary scale calculations

Haibo Chen <[email protected]>
iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct

Billy Tsai <[email protected]>
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.

Haibo Chen <[email protected]>
iio: accel: mma8452: use the correct logic to get mma8452_data

Robert Hancock <[email protected]>
iio: adc: xilinx-ams: Fix single channel switching sequence

Robert Hancock <[email protected]>
dt-bindings: iio: adc: zynqmp_ams: Add clock entry

Miaoqian Lin <[email protected]>
coresight: syscfg: Fix memleak on registration failure in cscfg_create_device

James Clark <[email protected]>
coresight: Fix TRCCONFIGR.QE sysfs interface

Akira Yokosawa <[email protected]>
docs: sphinx/requirements: Limit jinja2<3.1

Paul Davey <[email protected]>
bus: mhi: Fix MHI DMA structure endianness

Paul Davey <[email protected]>
bus: mhi: Fix pm_state conversion to string

Yonglin Tan <[email protected]>
bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series

Alexander Usyskin <[email protected]>
mei: avoid iterator usage outside of list_for_each_entry

Alexander Usyskin <[email protected]>
mei: me: add Alder Lake N device id.

Alexander Usyskin <[email protected]>
mei: me: disable driver on the ign firmware

Anssi Hannula <[email protected]>
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()

Mathias Nyman <[email protected]>
xhci: make xhci_handshake timeout for xhci_reset() adjustable

Henry Lin <[email protected]>
xhci: fix runtime PM imbalance in USB2 resume

Anssi Hannula <[email protected]>
xhci: fix garbage USBSTS being logged in some cases

Alan Stern <[email protected]>
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c

Sven Peter <[email protected]>
usb: typec: tipd: Forward plug orientation to typec subsystem

Jens Axboe <[email protected]>
block: ensure plug merging checks the correct queue at least once

Jens Axboe <[email protected]>
block: flush plug based on hardware and software queue order

Robin Murphy <[email protected]>
iommu/iova: Improve 32-bit free space estimate

Alex Deucher <[email protected]>
drm/amdgpu: only check for _PR3 on dGPUs

Alex Deucher <[email protected]>
drm/amdgpu: move PX checking into amdgpu_device_ip_early_init

Waiman Long <[email protected]>
locking/lockdep: Avoid potential access of invalid memory in lock_class

Muchun Song <[email protected]>
mm: kfence: fix missing objcg housekeeping for SLAB

Johan Hovold <[email protected]>
USB: serial: simple: add Nokia phone driver

Johan Hovold <[email protected]>
USB: serial: pl2303: fix GS type detection

Krzysztof Kozlowski <[email protected]>
dt-bindings: usb: hcd: correct usb-device path

Eddie James <[email protected]>
USB: serial: pl2303: add IBM device IDs

Linus Torvalds <[email protected]>
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

-------------

Diffstat:

 Documentation/ABI/testing/sysfs-fs-f2fs            |   1 +
 Documentation/admin-guide/kernel-parameters.txt    |   3 +-
 Documentation/admin-guide/sysctl/kernel.rst        |   1 +
 .../bindings/iio/adc/xlnx,zynqmp-ams.yaml          |   8 +
 .../devicetree/bindings/media/i2c/hynix,hi846.yaml |   6 +-
 .../memory-controllers/mediatek,smi-common.yaml    |  28 +-
 .../memory-controllers/mediatek,smi-larb.yaml      |  16 +-
 .../devicetree/bindings/mtd/nand-controller.yaml   |   4 +-
 .../bindings/pinctrl/microchip,sparx5-sgpio.yaml   |   2 +-
 .../bindings/pinctrl/pinctrl-mt8195.yaml           |  30 +-
 .../bindings/spi/nvidia,tegra210-quad.yaml         |   2 +-
 Documentation/devicetree/bindings/spi/spi-mxic.txt |   4 +-
 Documentation/devicetree/bindings/usb/usb-hcd.yaml |   2 +-
 Documentation/driver-api/cxl/memory-devices.rst    |   4 +-
 Documentation/process/stable-kernel-rules.rst      |  11 +-
 Documentation/security/SCTP.rst                    |  26 +-
 Documentation/sound/hd-audio/models.rst            |   4 +
 Documentation/sphinx/requirements.txt              |   2 +
 MAINTAINERS                                        |   3 +-
 Makefile                                           |   4 +-
 arch/Kconfig                                       |   1 +
 arch/arc/kernel/process.c                          |   2 +-
 arch/arm/boot/dts/bcm2711.dtsi                     |  50 +++
 arch/arm/boot/dts/bcm2837.dtsi                     |  49 +++
 arch/arm/boot/dts/dra7-l4.dtsi                     |   5 +-
 arch/arm/boot/dts/dra7.dtsi                        |   8 +-
 arch/arm/boot/dts/exynos5250-pinctrl.dtsi          |   2 +-
 arch/arm/boot/dts/exynos5250-smdk5250.dts          |   3 +
 arch/arm/boot/dts/exynos5420-smdk5420.dts          |   3 +
 arch/arm/boot/dts/imx53-m53menlo.dts               |  29 +-
 arch/arm/boot/dts/imx7-colibri.dtsi                |   4 +-
 arch/arm/boot/dts/imx7-mba7.dtsi                   |   2 +-
 arch/arm/boot/dts/imx7d-nitrogen7.dts              |   2 +-
 arch/arm/boot/dts/imx7d-pico-hobbit.dts            |   4 +-
 arch/arm/boot/dts/imx7d-pico-pi.dts                |   4 +-
 arch/arm/boot/dts/imx7d-sdb.dts                    |   4 +-
 arch/arm/boot/dts/imx7s-warp.dts                   |   4 +-
 arch/arm/boot/dts/openbmc-flash-layout-64.dtsi     |   2 +-
 arch/arm/boot/dts/openbmc-flash-layout.dtsi        |   2 +-
 arch/arm/boot/dts/qcom-ipq4019.dtsi                |   3 +-
 arch/arm/boot/dts/qcom-msm8960.dtsi                |   8 +-
 arch/arm/boot/dts/qcom-sdx55.dtsi                  |   2 +-
 arch/arm/boot/dts/sama5d2.dtsi                     |   2 +-
 arch/arm/boot/dts/sama7g5.dtsi                     |   6 -
 arch/arm/boot/dts/spear1340.dtsi                   |   6 +-
 arch/arm/boot/dts/spear13xx.dtsi                   |   6 +-
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi           |   2 +-
 arch/arm/boot/dts/sun8i-v3s.dtsi                   |  22 +-
 arch/arm/boot/dts/tegra20-asus-tf101.dts           |   2 +
 arch/arm/boot/dts/tegra20-tamonten.dtsi            |   6 +-
 .../boot/dts/tegra30-asus-transformer-common.dtsi  |   2 +
 arch/arm/boot/dts/tegra30-pegatron-chagall.dts     |   2 +
 arch/arm/configs/multi_v5_defconfig                |   2 +
 arch/arm/crypto/Kconfig                            |   2 +
 arch/arm/kernel/entry-ftrace.S                     |  53 +--
 arch/arm/kernel/swp_emulate.c                      |   2 +-
 arch/arm/kernel/traps.c                            |   2 +-
 arch/arm/mach-iop32x/include/mach/entry-macro.S    |   2 +-
 arch/arm/mach-iop32x/include/mach/irqs.h           |   2 +-
 arch/arm/mach-iop32x/irq.c                         |   6 +-
 arch/arm/mach-iop32x/irqs.h                        |  60 +--
 arch/arm/mach-mmp/sram.c                           |  22 +-
 arch/arm/mach-s3c/mach-jive.c                      |   6 +-
 arch/arm64/Kconfig                                 |   1 +
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi  |   8 +-
 .../arm64/boot/dts/broadcom/northstar2/ns2-svk.dts |   8 +-
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi   |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi     |   6 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |   6 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |   2 +-
 arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts    |   2 +-
 arch/arm64/boot/dts/qcom/msm8994.dtsi              |   3 +
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |   8 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |   6 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi               |  16 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |   2 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi               |  28 +-
 arch/arm64/boot/dts/rockchip/rk3399-firefly.dts    |   4 +-
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi           |   5 +-
 arch/arm64/boot/dts/ti/k3-am64.dtsi                |   1 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi           |   5 +-
 arch/arm64/boot/dts/ti/k3-am65.dtsi                |   1 +
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi          |   5 +-
 arch/arm64/boot/dts/ti/k3-j7200.dtsi               |   1 +
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi          |   5 +-
 arch/arm64/boot/dts/ti/k3-j721e.dtsi               |   1 +
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi         |   5 +-
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi   |   4 +-
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi              |   1 +
 arch/arm64/configs/defconfig                       |   2 +-
 arch/arm64/include/asm/module.lds.h                |   6 +-
 arch/arm64/include/asm/spectre.h                   |   3 +-
 arch/arm64/kernel/proton-pack.c                    |   9 +-
 arch/arm64/kernel/signal.c                         |  10 +-
 arch/arm64/mm/init.c                               |  36 +-
 arch/arm64/mm/mmu.c                                |  41 +-
 arch/arm64/net/bpf_jit_comp.c                      |  18 +-
 arch/csky/kernel/perf_callchain.c                  |   2 +-
 arch/csky/kernel/signal.c                          |   2 +-
 arch/m68k/coldfire/device.c                        |   6 +-
 arch/microblaze/include/asm/uaccess.h              |  18 +-
 arch/mips/Kconfig                                  |   1 +
 arch/mips/Makefile                                 |   4 -
 arch/mips/boot/compressed/Makefile                 |   1 +
 arch/mips/crypto/crc32-mips.c                      |  46 +-
 arch/mips/dec/int-handler.S                        |   6 +-
 arch/mips/dec/prom/Makefile                        |   2 +-
 arch/mips/dec/setup.c                              |   3 +-
 arch/mips/include/asm/dec/prom.h                   |  15 +-
 arch/mips/include/asm/pgalloc.h                    |   6 +
 arch/mips/mm/tlbex.c                               |  23 +-
 arch/mips/rb532/devices.c                          |   6 +-
 arch/mips/vdso/Makefile                            |   3 +
 arch/nios2/include/asm/uaccess.h                   |  26 +-
 arch/nios2/kernel/signal.c                         |  20 +-
 arch/parisc/include/asm/traps.h                    |   1 +
 arch/parisc/kernel/cache.c                         |  28 +-
 arch/parisc/kernel/traps.c                         |   2 +
 arch/parisc/mm/fault.c                             |  89 ++++
 arch/powerpc/Makefile                              |   2 +-
 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts       |  30 ++
 arch/powerpc/boot/dts/fsl/t1040rdb.dts             |   8 +-
 arch/powerpc/include/asm/io.h                      |  40 +-
 arch/powerpc/include/asm/set_memory.h              |  12 +-
 arch/powerpc/include/asm/uaccess.h                 |   3 +
 arch/powerpc/kernel/time.c                         |   5 +-
 arch/powerpc/kernel/tm.S                           |  25 +-
 arch/powerpc/kvm/book3s_hv.c                       |   5 +-
 arch/powerpc/kvm/powerpc.c                         |   4 +-
 arch/powerpc/lib/sstep.c                           |  12 +-
 arch/powerpc/mm/fault.c                            |  14 +-
 arch/powerpc/mm/kasan/kasan_init_32.c              |   3 +-
 arch/powerpc/mm/numa.c                             |   4 +-
 arch/powerpc/mm/pageattr.c                         |  39 +-
 arch/powerpc/mm/pgtable_32.c                       |  24 +-
 arch/powerpc/perf/imc-pmu.c                        |   6 +-
 arch/powerpc/platforms/8xx/pic.c                   |   1 +
 arch/powerpc/platforms/powernv/rng.c               |   6 +-
 arch/powerpc/platforms/pseries/pci_dlpar.c         |   4 +
 arch/powerpc/sysdev/fsl_gtm.c                      |   4 +-
 arch/powerpc/sysdev/xive/common.c                  |   6 +-
 arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts     |   2 +
 arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts    |   2 +
 arch/riscv/boot/dts/canaan/sipeed_maix_go.dts      |   2 +
 arch/riscv/boot/dts/canaan/sipeed_maixduino.dts    |   2 +
 arch/riscv/include/asm/module.lds.h                |   6 +-
 arch/riscv/include/asm/thread_info.h               |  10 +-
 arch/riscv/kernel/cpu_ops_sbi.c                    |   2 +-
 arch/riscv/kernel/perf_callchain.c                 |   6 +-
 arch/s390/kvm/kvm-s390.c                           |  19 +-
 arch/s390/kvm/kvm-s390.h                           |   4 +-
 arch/s390/kvm/priv.c                               |  15 +-
 arch/sparc/kernel/signal_32.c                      |   2 +-
 arch/um/drivers/mconsole_kern.c                    |   3 +-
 arch/x86/crypto/poly1305-x86_64-cryptogams.pl      |  38 +-
 arch/x86/events/intel/pt.c                         |   2 +-
 arch/x86/include/asm/svm.h                         |  10 +-
 arch/x86/kernel/fpu/xstate.c                       |   2 +-
 arch/x86/kernel/kvm.c                              |   2 +-
 arch/x86/kvm/emulate.c                             |  14 +-
 arch/x86/kvm/hyperv.c                              |  96 +++--
 arch/x86/kvm/lapic.c                               |   9 +-
 arch/x86/kvm/mmu.h                                 |   1 +
 arch/x86/kvm/mmu/paging_tmpl.h                     |  74 ++--
 arch/x86/kvm/mmu/tdp_mmu.c                         |  61 ++-
 arch/x86/kvm/mmu/tdp_mmu.h                         |   3 -
 arch/x86/kvm/svm/avic.c                            |  17 +-
 arch/x86/kvm/svm/sev.c                             |  36 +-
 arch/x86/kvm/x86.c                                 |   3 +-
 arch/x86/lib/iomem.c                               |  65 ++-
 arch/x86/xen/pmu.c                                 |  10 +-
 arch/x86/xen/pmu.h                                 |   3 +-
 arch/x86/xen/smp_pv.c                              |   2 +-
 arch/xtensa/include/asm/pgtable.h                  |   4 +
 arch/xtensa/include/asm/processor.h                |   4 +-
 arch/xtensa/kernel/jump_label.c                    |   2 +-
 arch/xtensa/kernel/mxhead.S                        |   2 +
 arch/xtensa/mm/tlb.c                               |   6 +
 block/bfq-cgroup.c                                 |   6 +
 block/bfq-iosched.c                                |  31 +-
 block/bfq-wf2q.c                                   |   2 +-
 block/bio.c                                        |   3 +-
 block/blk-cgroup.c                                 |  10 +-
 block/blk-ioc.c                                    |   3 +-
 block/blk-iolatency.c                              |   2 +-
 block/blk-merge.c                                  |  33 +-
 block/blk-mq-sched.c                               |   9 +-
 block/blk-mq.c                                     |  59 ++-
 block/blk-rq-qos.h                                 |  20 +-
 block/blk-sysfs.c                                  |   8 +-
 block/blk-throttle.c                               |  10 +-
 block/blk-throttle.h                               |   2 -
 block/genhd.c                                      |  16 +-
 crypto/Kconfig                                     |   1 +
 crypto/asymmetric_keys/pkcs7_verify.c              |   6 -
 crypto/asymmetric_keys/public_key.c                | 126 ++++--
 crypto/asymmetric_keys/x509_public_key.c           |   6 -
 crypto/authenc.c                                   |   2 +-
 crypto/rsa-pkcs1pad.c                              |  11 +-
 crypto/xts.c                                       |   1 +
 drivers/acpi/acpica/nswalk.c                       |   3 +
 drivers/acpi/apei/bert.c                           |  10 +-
 drivers/acpi/apei/erst.c                           |   2 +-
 drivers/acpi/apei/hest.c                           |   2 +-
 drivers/acpi/bus.c                                 |  27 +-
 drivers/acpi/cppc_acpi.c                           |   5 +
 drivers/acpi/property.c                            |   2 +-
 drivers/acpi/x86/utils.c                           |  21 +
 drivers/base/dd.c                                  |   2 +-
 drivers/base/memory.c                              |   8 +-
 drivers/base/power/domain.c                        |   2 +-
 drivers/base/power/main.c                          |   6 +-
 drivers/block/drbd/drbd_req.c                      |   3 +-
 drivers/block/loop.c                               |  11 +-
 drivers/block/n64cart.c                            |   2 +-
 drivers/bluetooth/btintel.c                        |  11 +-
 drivers/bluetooth/btintel.h                        |   1 +
 drivers/bluetooth/btmtksdio.c                      | 157 +++++--
 drivers/bluetooth/btusb.c                          |   6 +
 drivers/bluetooth/hci_h5.c                         |   8 +-
 drivers/bluetooth/hci_serdev.c                     |   3 +-
 drivers/bus/mhi/core/debugfs.c                     |  26 +-
 drivers/bus/mhi/core/init.c                        |  46 +-
 drivers/bus/mhi/core/internal.h                    | 121 +++---
 drivers/bus/mhi/core/main.c                        |  22 +-
 drivers/bus/mhi/core/pm.c                          |   4 +-
 drivers/bus/mhi/pci_generic.c                      |   1 +
 drivers/bus/mips_cdmm.c                            |   1 +
 drivers/char/hw_random/Kconfig                     |   2 +-
 drivers/char/hw_random/atmel-rng.c                 |   1 +
 drivers/char/hw_random/cavium-rng-vf.c             |   2 +-
 drivers/char/hw_random/nomadik-rng.c               |   4 +-
 drivers/clk/actions/owl-s700.c                     |   1 +
 drivers/clk/actions/owl-s900.c                     |   2 +-
 drivers/clk/at91/sama7g5.c                         |   8 +-
 drivers/clk/clk-clps711x.c                         |   2 +
 drivers/clk/clk.c                                  |  16 +-
 drivers/clk/hisilicon/clk-hi3559a.c                |   4 +-
 drivers/clk/imx/clk-imx7d.c                        |   1 -
 drivers/clk/imx/clk-imx8qxp-lpcg.c                 |   2 +-
 drivers/clk/loongson1/clk-loongson1c.c             |   1 +
 drivers/clk/qcom/clk-rcg2.c                        |  14 +-
 drivers/clk/qcom/gcc-ipq8074.c                     |  21 +-
 drivers/clk/qcom/gcc-msm8994.c                     |   1 +
 drivers/clk/renesas/r8a779f0-cpg-mssr.c            |   2 +-
 drivers/clk/renesas/r9a07g044-cpg.c                |   4 +-
 drivers/clk/rockchip/clk.c                         |   3 +
 drivers/clk/starfive/clk-starfive-jh7100.c         |  82 +++-
 drivers/clk/tegra/clk-tegra124-emc.c               |   1 +
 drivers/clk/uniphier/clk-uniphier-fixed-rate.c     |   1 +
 drivers/clk/visconti/clkc-tmpv770x.c               |   2 +-
 drivers/clk/visconti/clkc.c                        |   2 +-
 drivers/clk/visconti/clkc.h                        |   3 +
 drivers/clocksource/acpi_pm.c                      |   6 +-
 drivers/clocksource/exynos_mct.c                   |  10 +-
 drivers/clocksource/timer-microchip-pit64b.c       |   2 +-
 drivers/clocksource/timer-of.c                     |   6 +-
 drivers/clocksource/timer-ti-dm-systimer.c         |   4 +-
 drivers/cpufreq/qcom-cpufreq-nvmem.c               |   2 +-
 drivers/cpuidle/cpuidle-qcom-spm.c                 |  20 +
 .../crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c    |   3 +
 drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c  |   3 +
 .../crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c    |   3 +
 drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c  |   2 +
 drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c  |   3 +
 drivers/crypto/amlogic/amlogic-gxl-cipher.c        |   2 +
 drivers/crypto/ccp/ccp-dmaengine.c                 |  16 +
 drivers/crypto/ccp/sev-dev.c                       |   2 +-
 drivers/crypto/ccree/cc_buffer_mgr.c               |   7 +
 drivers/crypto/ccree/cc_cipher.c                   |   2 +-
 drivers/crypto/gemini/sl3516-ce-cipher.c           |   2 +
 drivers/crypto/hisilicon/qm.c                      |   2 +-
 drivers/crypto/hisilicon/sec2/sec_crypto.c         |  16 +-
 drivers/crypto/hisilicon/sec2/sec_main.c           |   8 +-
 drivers/crypto/marvell/Kconfig                     |   1 +
 .../crypto/marvell/octeontx2/otx2_cptpf_ucode.c    |  43 +-
 drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c |  17 +-
 drivers/crypto/mxs-dcp.c                           |   2 +-
 drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c     |   2 +-
 drivers/crypto/qat/qat_common/adf_gen4_pfvf.c      |  42 +-
 drivers/crypto/qat/qat_common/adf_pfvf_vf_msg.c    |   4 +-
 drivers/crypto/rockchip/rk3288_crypto_skcipher.c   |   1 -
 drivers/crypto/vmx/Kconfig                         |   4 +
 drivers/cxl/core/Makefile                          |   2 +-
 drivers/cxl/core/{bus.c => port.c}                 |   4 +
 drivers/cxl/core/regs.c                            |   6 +-
 drivers/dax/super.c                                |   1 +
 drivers/dma-buf/udmabuf.c                          |   4 +
 drivers/dma/hisi_dma.c                             |   2 +-
 drivers/dma/idxd/device.c                          |   9 +-
 drivers/firmware/efi/efi-pstore.c                  |   2 +-
 drivers/firmware/google/Kconfig                    |   2 +-
 drivers/firmware/qcom_scm.c                        |   6 -
 drivers/firmware/stratix10-svc.c                   |   2 +-
 drivers/firmware/sysfb_simplefb.c                  |  23 +-
 drivers/fsi/fsi-master-aspeed.c                    |  17 +-
 drivers/fsi/fsi-scom.c                             |  45 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c     |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  15 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c     |  13 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c            |  11 -
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  19 +-
 .../gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c  |   8 +
 drivers/gpu/drm/amd/display/dc/inc/link_enc_cfg.h  |   5 +
 .../amd/display/dc/irq/dcn21/irq_service_dcn21.c   |  14 -
 drivers/gpu/drm/amd/pm/amdgpu_pm.c                 |   4 +-
 drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c          |   2 +-
 drivers/gpu/drm/bridge/adv7511/adv7511.h           |   1 +
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c       |  29 +-
 drivers/gpu/drm/bridge/analogix/anx7625.c          |   3 +-
 drivers/gpu/drm/bridge/cdns-dsi.c                  |   1 +
 drivers/gpu/drm/bridge/lontium-lt9611.c            |   6 +-
 drivers/gpu/drm/bridge/nwl-dsi.c                   |   1 +
 drivers/gpu/drm/bridge/sil-sii8620.c               |   2 +-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c          |   5 +-
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c      |   1 +
 drivers/gpu/drm/bridge/ti-sn65dsi83.c              |  32 +-
 drivers/gpu/drm/drm_dp_helper.c                    |  10 -
 drivers/gpu/drm/drm_edid.c                         |  18 +-
 drivers/gpu/drm/drm_fb_helper.c                    |   9 +-
 drivers/gpu/drm/drm_syncobj.c                      |  61 ++-
 drivers/gpu/drm/i915/display/intel_bw.c            |   3 +-
 drivers/gpu/drm/i915/display/intel_dp.c            |   2 +-
 drivers/gpu/drm/i915/display/intel_hdmi.c          |  13 +-
 drivers/gpu/drm/i915/display/intel_opregion.c      |  15 +
 drivers/gpu/drm/i915/display/intel_pps.c           |   6 +-
 drivers/gpu/drm/i915/display/intel_pps.h           |   2 +-
 drivers/gpu/drm/i915/display/intel_psr.c           |   4 +
 drivers/gpu/drm/i915/gem/i915_gem_mman.c           |   2 +-
 drivers/gpu/drm/i915/i915_drv.h                    |   2 +-
 drivers/gpu/drm/i915/intel_pm.c                    |  10 +-
 drivers/gpu/drm/meson/meson_drv.c                  |  25 +-
 drivers/gpu/drm/meson/meson_osd_afbcd.c            |  41 +-
 drivers/gpu/drm/meson/meson_osd_afbcd.h            |   1 +
 drivers/gpu/drm/mgag200/mgag200_mode.c             |   5 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              |  12 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        |   7 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c             |   8 +
 drivers/gpu/drm/msm/dp/dp_ctrl.c                   |  83 ++--
 drivers/gpu/drm/msm/dp/dp_ctrl.h                   |   8 +-
 drivers/gpu/drm/msm/dp/dp_display.c                | 116 +++---
 drivers/gpu/drm/msm/dp/dp_drm.c                    |  21 +-
 drivers/gpu/drm/msm/dp/dp_panel.c                  |   5 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c         |   4 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c         |   4 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c         |   4 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c    |   4 +-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c          |  26 +-
 drivers/gpu/drm/nouveau/nouveau_backlight.c        |   6 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c     |   9 +-
 drivers/gpu/drm/panfrost/panfrost_gpu.c            |   5 +-
 drivers/gpu/drm/radeon/radeon_connectors.c         |   2 +-
 drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c |   4 +-
 drivers/gpu/drm/tegra/dp.c                         |  11 +-
 drivers/gpu/drm/tegra/dsi.c                        |   4 +-
 drivers/gpu/drm/tiny/simpledrm.c                   |   3 +
 drivers/gpu/drm/v3d/v3d_drv.c                      |   8 +-
 drivers/gpu/host1x/dev.c                           |   8 +-
 drivers/greybus/svc.c                              |   8 +-
 drivers/hid/i2c-hid/i2c-hid-core.c                 |  32 +-
 drivers/hid/intel-ish-hid/ishtp-fw-loader.c        |  29 +-
 drivers/hv/hv_balloon.c                            |   2 +-
 drivers/hwmon/pmbus/pmbus.h                        |   1 +
 drivers/hwmon/pmbus/pmbus_core.c                   |  18 +-
 drivers/hwmon/sch56xx-common.c                     |   2 +-
 .../hwtracing/coresight/coresight-etm4x-sysfs.c    |   8 +-
 drivers/hwtracing/coresight/coresight-syscfg.c     |   2 +-
 drivers/i2c/busses/i2c-bcm2835.c                   |  21 +-
 drivers/i2c/busses/i2c-meson.c                     |  12 +-
 drivers/i2c/busses/i2c-pasemi-core.c               |   1 -
 drivers/i2c/busses/i2c-pasemi-pci.c                |   1 +
 drivers/i2c/busses/i2c-xiic.c                      |   3 +-
 drivers/i2c/muxes/i2c-demux-pinctrl.c              |   5 +-
 drivers/iio/accel/mma8452.c                        |  33 +-
 drivers/iio/adc/aspeed_adc.c                       |   4 +-
 drivers/iio/adc/twl6030-gpadc.c                    |   2 +
 drivers/iio/adc/xilinx-ams.c                       |  15 +-
 drivers/iio/afe/iio-rescale.c                      |   8 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c       |   4 +-
 drivers/iio/inkern.c                               |  40 +-
 drivers/infiniband/core/cma.c                      |   2 +-
 drivers/infiniband/core/nldev.c                    |   3 +-
 drivers/infiniband/core/verbs.c                    |   1 +
 drivers/infiniband/hw/hfi1/verbs.c                 |   3 +-
 drivers/infiniband/hw/irdma/ctrl.c                 |  10 +-
 drivers/infiniband/hw/irdma/hw.c                   |   2 +-
 drivers/infiniband/hw/irdma/i40iw_if.c             |   1 +
 drivers/infiniband/hw/irdma/main.c                 |   1 +
 drivers/infiniband/hw/irdma/main.h                 |   1 +
 drivers/infiniband/hw/irdma/utils.c                |  48 ++-
 drivers/infiniband/hw/irdma/verbs.c                |   4 +-
 drivers/infiniband/hw/mlx5/devx.c                  |   4 +-
 drivers/infiniband/hw/mlx5/mr.c                    |   2 +
 drivers/infiniband/sw/rxe/rxe_av.c                 |  19 +-
 drivers/infiniband/sw/rxe/rxe_loc.h                |   5 +-
 drivers/infiniband/sw/rxe/rxe_net.c                |  17 +-
 drivers/infiniband/sw/rxe/rxe_req.c                |  63 +--
 drivers/infiniband/sw/rxe/rxe_resp.c               |  12 +-
 drivers/input/input.c                              |   6 -
 drivers/iommu/iova.c                               |   5 +-
 drivers/iommu/ipmmu-vmsa.c                         |   4 +-
 drivers/iommu/mtk_iommu.c                          |  32 +-
 drivers/iommu/mtk_iommu_v1.c                       |  40 +-
 drivers/irqchip/irq-nvic.c                         |   2 +
 drivers/irqchip/qcom-pdc.c                         |   5 +-
 drivers/mailbox/imx-mailbox.c                      |  11 +-
 drivers/mailbox/tegra-hsp.c                        |   5 +
 drivers/md/bcache/btree.c                          |   6 +-
 drivers/md/bcache/writeback.c                      |   6 +-
 drivers/md/dm-core.h                               |   2 +
 drivers/md/dm-crypt.c                              |   2 +-
 drivers/md/dm-integrity.c                          |   6 +-
 drivers/md/dm-stats.c                              |  34 +-
 drivers/md/dm-stats.h                              |  11 +-
 drivers/md/dm.c                                    |  86 ++--
 drivers/media/i2c/adv7511-v4l2.c                   |   2 +-
 drivers/media/i2c/adv7604.c                        |   2 +-
 drivers/media/i2c/adv7842.c                        |   2 +-
 drivers/media/i2c/ov2740.c                         |   8 +-
 drivers/media/i2c/ov5640.c                         |  14 +-
 drivers/media/i2c/ov5648.c                         |  12 +-
 drivers/media/i2c/ov6650.c                         | 115 +++--
 drivers/media/i2c/ov8865.c                         |   4 +-
 drivers/media/pci/bt8xx/bttv-driver.c              |   4 +-
 drivers/media/pci/cx88/cx88-mpeg.c                 |   3 +
 drivers/media/pci/ivtv/ivtv-driver.h               |   1 -
 drivers/media/pci/ivtv/ivtv-ioctl.c                |  10 +-
 drivers/media/pci/ivtv/ivtv-streams.c              |  11 +-
 drivers/media/pci/saa7134/saa7134-alsa.c           |   4 +-
 drivers/media/platform/aspeed-video.c              |   9 +-
 drivers/media/platform/atmel/atmel-isc-base.c      |  22 +-
 drivers/media/platform/atmel/atmel-sama7g5-isc.c   |   6 -
 drivers/media/platform/coda/coda-common.c          |   1 +
 drivers/media/platform/davinci/vpif.c              | 109 +++--
 drivers/media/platform/imx-jpeg/mxc-jpeg.c         |   7 +-
 drivers/media/platform/meson/ge2d/ge2d.c           |  24 +-
 .../media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c  |   2 +
 drivers/media/platform/omap3isp/ispstat.c          |   5 +-
 drivers/media/platform/qcom/camss/camss-csid-170.c |  19 +-
 drivers/media/platform/qcom/camss/camss-vfe-170.c  |  12 +-
 drivers/media/platform/qcom/venus/helpers.c        |   2 +-
 drivers/media/platform/qcom/venus/hfi_cmds.c       |   2 +
 drivers/media/platform/qcom/venus/venc.c           |   4 +-
 drivers/media/platform/qcom/venus/venc_ctrls.c     |   6 +-
 drivers/media/platform/ti-vpe/cal-video.c          |   3 +
 drivers/media/rc/gpio-ir-tx.c                      |  28 +-
 drivers/media/rc/ir_toy.c                          |   2 +-
 drivers/media/test-drivers/vidtv/vidtv_s302m.c     |  17 +-
 drivers/media/usb/em28xx/em28xx-cards.c            |  13 +-
 drivers/media/usb/go7007/s2250-board.c             |  10 +-
 drivers/media/usb/hdpvr/hdpvr-video.c              |   4 +-
 drivers/media/usb/stk1160/stk1160-core.c           |   2 +-
 drivers/media/usb/stk1160/stk1160-v4l.c            |  10 +-
 drivers/media/usb/stk1160/stk1160.h                |   2 +-
 drivers/media/v4l2-core/v4l2-ctrls-core.c          |  18 +
 drivers/media/v4l2-core/v4l2-ioctl.c               |  12 +-
 drivers/media/v4l2-core/v4l2-mem2mem.c             |  53 ++-
 drivers/memory/emif.c                              |   8 +-
 drivers/memory/tegra/tegra20-emc.c                 |   2 +-
 drivers/memstick/core/mspro_block.c                |  10 +-
 drivers/mfd/asic3.c                                |  10 +-
 drivers/mfd/mc13xxx-core.c                         |   4 +-
 drivers/misc/cardreader/alcor_pci.c                |   9 +-
 drivers/misc/habanalabs/common/debugfs.c           |   2 +
 drivers/misc/kgdbts.c                              |   4 +-
 drivers/misc/mei/hw-me-regs.h                      |   2 +
 drivers/misc/mei/hw-me.c                           |  23 +-
 drivers/misc/mei/interrupt.c                       |  35 +-
 drivers/misc/mei/pci-me.c                          |   1 +
 drivers/mmc/core/bus.c                             |   9 +-
 drivers/mmc/core/bus.h                             |   3 +-
 drivers/mmc/core/host.c                            |  15 +-
 drivers/mmc/core/mmc.c                             |  16 +-
 drivers/mmc/core/sd.c                              |  25 +-
 drivers/mmc/core/sdio.c                            |   5 +-
 drivers/mmc/core/sdio_bus.c                        |   7 +-
 drivers/mmc/host/davinci_mmc.c                     |   6 +-
 drivers/mmc/host/rtsx_pci_sdmmc.c                  |  20 +-
 drivers/mmc/host/sdhci_am654.c                     |  24 +-
 drivers/mtd/devices/mchp23k256.c                   |  14 +
 drivers/mtd/devices/mchp48l640.c                   |  10 +
 drivers/mtd/nand/onenand/generic.c                 |   7 +-
 drivers/mtd/nand/raw/atmel/nand-controller.c       |  14 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c         |   3 +
 drivers/mtd/nand/raw/nand_base.c                   |  44 +-
 drivers/mtd/nand/raw/pl35x-nand-controller.c       |   2 +-
 drivers/mtd/spi-nor/core.c                         |   3 +-
 drivers/mtd/ubi/build.c                            |   9 +-
 drivers/mtd/ubi/fastmap.c                          |  28 +-
 drivers/mtd/ubi/vmt.c                              |   8 +-
 drivers/net/bareudp.c                              |  19 +-
 drivers/net/can/m_can/m_can.c                      |   5 +-
 drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c     |   2 +-
 drivers/net/can/usb/ems_usb.c                      |   1 -
 drivers/net/can/usb/mcba_usb.c                     |  27 +-
 drivers/net/can/usb/usb_8dev.c                     |  30 +-
 drivers/net/can/vxcan.c                            |   2 +-
 drivers/net/dsa/Kconfig                            |  12 +-
 drivers/net/dsa/Makefile                           |   3 +-
 drivers/net/dsa/bcm_sf2_cfp.c                      |   6 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |   1 +
 drivers/net/dsa/realtek/Kconfig                    |  20 +
 drivers/net/dsa/realtek/Makefile                   |   3 +
 drivers/net/dsa/{ => realtek}/realtek-smi-core.c   |   0
 drivers/net/dsa/{ => realtek}/realtek-smi-core.h   |   4 +-
 drivers/net/dsa/{ => realtek}/rtl8365mb.c          |   0
 drivers/net/dsa/{ => realtek}/rtl8366.c            |   0
 drivers/net/dsa/{ => realtek}/rtl8366rb.c          |   2 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c      |   6 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h      |   2 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   4 +-
 .../net/ethernet/freescale/enetc/enetc_ethtool.c   |   5 +-
 drivers/net/ethernet/freescale/enetc/enetc_qos.c   | 128 +++---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h        |   4 +
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c |  15 +-
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.h |   1 -
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    |  44 +-
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |  23 +-
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 179 ++++++--
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |   4 +
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c    |   4 +-
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |   5 +
 drivers/net/ethernet/ibm/ibmvnic.c                 |  63 ++-
 drivers/net/ethernet/ibm/ibmvnic.h                 |   7 +-
 drivers/net/ethernet/intel/i40e/i40e_xsk.c         |  19 +-
 drivers/net/ethernet/intel/ice/ice.h               |   4 +-
 drivers/net/ethernet/intel/ice/ice_idc.c           |   3 +
 drivers/net/ethernet/intel/ice/ice_main.c          |  25 +-
 drivers/net/ethernet/intel/ice/ice_xsk.c           |  16 +-
 drivers/net/ethernet/intel/igb/igb_ethtool.c       |   4 -
 drivers/net/ethernet/intel/igb/igb_main.c          |  19 +-
 drivers/net/ethernet/intel/igc/igc_main.c          |  16 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c       |  27 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_npc.c    |  15 +-
 drivers/net/ethernet/microchip/sparx5/Kconfig      |   2 +
 .../net/ethernet/microchip/sparx5/sparx5_fdma.c    |   2 +
 .../net/ethernet/pensando/ionic/ionic_bus_pci.c    |   4 +-
 drivers/net/ethernet/pensando/ionic/ionic_dev.c    |  20 +-
 drivers/net/ethernet/pensando/ionic/ionic_dev.h    |   1 +
 drivers/net/ethernet/pensando/ionic/ionic_main.c   |  34 +-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c        |  29 +-
 drivers/net/ethernet/qlogic/qed/qed_sriov.h        |   1 +
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h    |  10 +-
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    |   7 +
 drivers/net/ethernet/ti/cpsw_ethtool.c             |   6 +-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c  |  72 ++--
 drivers/net/hyperv/netvsc.c                        |  24 +-
 drivers/net/phy/at803x.c                           |  40 +-
 drivers/net/phy/broadcom.c                         |  21 +
 drivers/net/phy/micrel.c                           |  30 +-
 drivers/net/usb/asix.h                             |   4 +-
 drivers/net/usb/asix_common.c                      |  19 +-
 drivers/net/usb/asix_devices.c                     |  21 +-
 drivers/net/wireguard/queueing.c                   |   3 +-
 drivers/net/wireguard/socket.c                     |   5 +-
 drivers/net/wireless/ath/ath10k/snoc.c             |   2 +-
 drivers/net/wireless/ath/ath10k/wow.c              |   7 +-
 drivers/net/wireless/ath/ath11k/dp_rx.c            |   2 +-
 drivers/net/wireless/ath/ath11k/dp_tx.c            |   2 +-
 drivers/net/wireless/ath/ath11k/mac.c              |  34 +-
 drivers/net/wireless/ath/ath11k/mhi.c              |   1 +
 drivers/net/wireless/ath/ath11k/qmi.c              |   3 +-
 drivers/net/wireless/ath/ath9k/htc_hst.c           |   5 +
 drivers/net/wireless/ath/carl9170/main.c           |   2 +-
 .../broadcom/brcm80211/brcmfmac/firmware.c         |   2 +
 .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    |  73 ++--
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |   1 -
 drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c  |   2 +-
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c        |   2 -
 drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c   |  13 +-
 drivers/net/wireless/intel/iwlwifi/iwl-prph.h      |   2 -
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c        |   4 +
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c        |   4 +-
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c       |   3 +-
 drivers/net/wireless/intel/iwlwifi/mvm/rx.c        |   2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c        |   5 +-
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c    |   2 +-
 drivers/net/wireless/mediatek/mt76/mt76.h          |   2 +-
 drivers/net/wireless/mediatek/mt76/mt7603/main.c   |   3 +
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c    |  56 ++-
 drivers/net/wireless/mediatek/mt76/mt7615/main.c   |   3 +
 .../net/wireless/mediatek/mt76/mt76_connac_mcu.c   |   2 +-
 .../net/wireless/mediatek/mt76/mt76_connac_mcu.h   |   3 +-
 drivers/net/wireless/mediatek/mt76/mt7915/init.c   |   2 +-
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c    |  50 ++-
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c    |  67 ++-
 drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h |   8 +-
 .../net/wireless/mediatek/mt76/mt7921/debugfs.c    |  16 +-
 drivers/net/wireless/mediatek/mt76/mt7921/dma.c    | 119 ------
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c    |  68 +--
 drivers/net/wireless/mediatek/mt76/mt7921/mac.h    |   3 +
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c    |  57 +--
 drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h |   1 +
 drivers/net/wireless/mediatek/mt76/mt7921/pci.c    | 124 ++++++
 .../net/wireless/mediatek/mt76/mt7921/pci_mcu.c    |  18 +-
 drivers/net/wireless/mediatek/mt76/mt7921/regs.h   |  11 +-
 .../net/wireless/mediatek/mt76/mt7921/sdio_mcu.c   |  38 ++
 drivers/net/wireless/mediatek/mt76/sdio.h          |   2 +
 drivers/net/wireless/ray_cs.c                      |   6 +
 drivers/net/wireless/realtek/rtw88/fw.c            |  42 +-
 drivers/net/wireless/realtek/rtw88/mac80211.c      |   5 +-
 drivers/net/wireless/realtek/rtw88/main.c          |  16 +-
 drivers/net/wireless/realtek/rtw88/main.h          |   4 +-
 drivers/net/wwan/qcom_bam_dmux.c                   |   2 +-
 drivers/nvdimm/region_devs.c                       |   3 +
 drivers/nvme/host/core.c                           |  48 ++-
 drivers/nvme/host/multipath.c                      |   7 +-
 drivers/nvme/host/nvme.h                           |  19 +
 drivers/nvme/host/tcp.c                            |  40 ++
 drivers/pci/access.c                               |   9 +-
 drivers/pci/controller/dwc/pci-imx6.c              |  15 +-
 drivers/pci/controller/dwc/pcie-fu740.c            |  51 ++-
 drivers/pci/controller/pci-aardvark.c              |  13 +-
 drivers/pci/controller/pci-xgene.c                 |  35 +-
 drivers/pci/hotplug/pciehp_hpc.c                   |   2 +
 drivers/pci/quirks.c                               |  12 +
 drivers/perf/Kconfig                               |   2 +-
 drivers/perf/arm-cmn.c                             |  21 +-
 drivers/phy/broadcom/phy-brcm-usb-init.c           |  36 ++
 drivers/phy/broadcom/phy-brcm-usb-init.h           |   1 +
 drivers/phy/broadcom/phy-brcm-usb.c                |  11 +-
 drivers/phy/phy-core-mipi-dphy.c                   |   4 +-
 drivers/pinctrl/mediatek/pinctrl-mtk-common.c      |   2 +
 drivers/pinctrl/mediatek/pinctrl-paris.c           |  32 +-
 drivers/pinctrl/nomadik/pinctrl-nomadik.c          |   4 +-
 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c          | 185 ++++-----
 drivers/pinctrl/pinconf-generic.c                  |   6 +-
 drivers/pinctrl/pinctrl-ingenic.c                  |  46 +-
 drivers/pinctrl/pinctrl-microchip-sgpio.c          |  15 +
 drivers/pinctrl/pinctrl-ocelot.c                   |   7 +-
 drivers/pinctrl/pinctrl-rockchip.c                 |   2 +
 drivers/pinctrl/renesas/core.c                     |   5 +-
 drivers/pinctrl/renesas/pfc-r8a77470.c             |   4 +-
 drivers/pinctrl/samsung/pinctrl-exynos-arm64.c     |   2 -
 drivers/pinctrl/samsung/pinctrl-samsung.c          |  30 +-
 drivers/platform/chrome/Makefile                   |   3 +-
 drivers/platform/chrome/cros_ec_sensorhub_ring.c   |   3 +-
 drivers/platform/chrome/cros_ec_sensorhub_trace.h  | 123 ++++++
 drivers/platform/chrome/cros_ec_trace.h            |  95 -----
 drivers/platform/chrome/cros_ec_typec.c            |   6 +
 drivers/platform/x86/asus-wmi.c                    |   2 +-
 drivers/platform/x86/huawei-wmi.c                  |  13 +-
 drivers/power/reset/gemini-poweroff.c              |   4 +-
 drivers/power/supply/ab8500_bmdata.c               |   8 +-
 drivers/power/supply/ab8500_chargalg.c             |   6 +-
 drivers/power/supply/ab8500_fg.c                   |  12 +-
 drivers/power/supply/bq24190_charger.c             |   7 +-
 drivers/power/supply/sbs-charger.c                 |  18 +-
 drivers/power/supply/wm8350_power.c                |  97 ++++-
 drivers/powercap/dtpm_cpu.c                        |   7 +
 drivers/pps/clients/pps-gpio.c                     |   2 +-
 drivers/ptp/ptp_clock.c                            |  11 +-
 drivers/pwm/pwm-lpc18xx-sct.c                      |  20 +-
 drivers/regulator/qcom_smd-regulator.c             |   4 +-
 drivers/regulator/rpi-panel-attiny-regulator.c     |  56 ++-
 drivers/remoteproc/qcom_q6v5_adsp.c                |   1 +
 drivers/remoteproc/qcom_q6v5_mss.c                 |  11 +-
 drivers/remoteproc/qcom_wcnss.c                    |   1 +
 drivers/remoteproc/remoteproc_debugfs.c            |   2 +-
 drivers/rtc/interface.c                            |   7 +-
 drivers/rtc/rtc-gamecube.c                         |   1 +
 drivers/rtc/rtc-mc146818-lib.c                     |   6 +-
 drivers/rtc/rtc-pl031.c                            |   6 +-
 drivers/scsi/fnic/fnic_scsi.c                      |   2 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c             |   2 +-
 drivers/scsi/libsas/sas_ata.c                      |   2 +-
 drivers/scsi/mpt3sas/mpt3sas_base.c                |  25 +-
 drivers/scsi/pm8001/pm8001_hwi.c                   |  23 +-
 drivers/scsi/pm8001/pm80xx_hwi.c                   | 209 +++++-----
 drivers/scsi/qla2xxx/qla_attr.c                    |   7 +-
 drivers/scsi/qla2xxx/qla_bsg.c                     |   6 +-
 drivers/scsi/qla2xxx/qla_def.h                     |  22 +-
 drivers/scsi/qla2xxx/qla_edif.c                    |  25 +-
 drivers/scsi/qla2xxx/qla_gbl.h                     |   4 +-
 drivers/scsi/qla2xxx/qla_gs.c                      | 160 +++----
 drivers/scsi/qla2xxx/qla_init.c                    | 233 ++++++-----
 drivers/scsi/qla2xxx/qla_inline.h                  |   2 +
 drivers/scsi/qla2xxx/qla_iocb.c                    |  93 +++--
 drivers/scsi/qla2xxx/qla_isr.c                     |   1 +
 drivers/scsi/qla2xxx/qla_mbx.c                     |  29 +-
 drivers/scsi/qla2xxx/qla_mid.c                     |   9 +-
 drivers/scsi/qla2xxx/qla_mr.c                      |  11 +-
 drivers/scsi/qla2xxx/qla_nvme.c                    |  22 +
 drivers/scsi/qla2xxx/qla_os.c                      |  54 ++-
 drivers/scsi/qla2xxx/qla_sup.c                     |   4 +-
 drivers/scsi/qla2xxx/qla_target.c                  |  14 +-
 drivers/scsi/qla2xxx/qla_tmpl.c                    |   9 +-
 drivers/scsi/scsi_error.c                          |   9 +-
 drivers/scsi/scsi_transport_fc.c                   |  39 +-
 drivers/scsi/sd.c                                  |   6 +-
 drivers/scsi/ufs/ufshcd.c                          |  21 +-
 drivers/soc/mediatek/mtk-pm-domains.c              |   3 +
 drivers/soc/qcom/ocmem.c                           |   1 +
 drivers/soc/qcom/qcom_aoss.c                       |   8 +-
 drivers/soc/qcom/rpmpd.c                           |   3 +
 drivers/soc/ti/wkup_m3_ipc.c                       |   4 +-
 drivers/soundwire/dmi-quirks.c                     |   2 +-
 drivers/soundwire/intel.c                          |   4 +-
 drivers/spi/spi-fsi.c                              |  10 +
 drivers/spi/spi-mt65xx.c                           |  15 +-
 drivers/spi/spi-mxic.c                             |  28 +-
 drivers/spi/spi-pxa2xx-pci.c                       |  17 +-
 drivers/spi/spi-tegra114.c                         |   4 +
 drivers/spi/spi-tegra20-slink.c                    |   8 +-
 drivers/spi/spi-tegra210-quad.c                    |   2 +
 drivers/spi/spi-zynqmp-gqspi.c                     |   5 +-
 drivers/staging/iio/adc/ad7280a.c                  |   4 +-
 drivers/staging/media/atomisp/pci/atomisp_acc.c    |  28 +-
 .../media/atomisp/pci/atomisp_gmin_platform.c      |  18 +
 drivers/staging/media/atomisp/pci/hmm/hmm.c        |   7 +-
 drivers/staging/media/hantro/hantro_h1_jpeg_enc.c  |   2 +-
 drivers/staging/media/hantro/hantro_h1_regs.h      |   2 +-
 drivers/staging/media/hantro/sunxi_vpu_hw.c        |   4 +-
 drivers/staging/media/imx/imx7-mipi-csis.c         |   6 +-
 drivers/staging/media/imx/imx8mq-mipi-csi2.c       |  74 ++--
 drivers/staging/media/meson/vdec/esparser.c        |   7 +-
 drivers/staging/media/meson/vdec/vdec_helpers.c    |   8 +-
 drivers/staging/media/meson/vdec/vdec_helpers.h    |   4 +-
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c   |   2 +-
 drivers/staging/media/sunxi/cedrus/cedrus_h265.c   |   2 +-
 drivers/staging/media/zoran/zoran.h                |   2 +-
 drivers/staging/media/zoran/zoran_card.c           |  86 ++--
 drivers/staging/media/zoran/zoran_device.c         |   7 +-
 drivers/staging/media/zoran/zoran_driver.c         |  18 +-
 drivers/staging/mt7621-dts/gbpc1.dts               |  40 +-
 drivers/staging/mt7621-dts/gbpc2.dts               | 116 +++++-
 drivers/staging/mt7621-dts/mt7621.dtsi             |  26 +-
 drivers/staging/qlge/qlge_main.c                   |  11 +-
 drivers/staging/r8188eu/core/rtw_recv.c            |   3 +-
 drivers/staging/r8188eu/hal/rtl8188e_hal_init.c    |   2 +-
 .../intel/int340x_thermal/int3400_thermal.c        |   7 +-
 drivers/tty/hvc/hvc_iucv.c                         |   4 +-
 drivers/tty/mxser.c                                |  15 +-
 drivers/tty/serial/8250/8250_aspeed_vuart.c        |   2 +-
 drivers/tty/serial/8250/8250_dma.c                 |  11 +-
 drivers/tty/serial/8250/8250_lpss.c                |  28 +-
 drivers/tty/serial/8250/8250_mid.c                 |  19 +-
 drivers/tty/serial/8250/8250_port.c                |  24 +-
 drivers/tty/serial/kgdboc.c                        |   6 +-
 drivers/tty/serial/serial_core.c                   |  14 +
 drivers/usb/host/xhci-hub.c                        |   5 +-
 drivers/usb/host/xhci-mem.c                        |   2 +-
 drivers/usb/host/xhci.c                            |  20 +-
 drivers/usb/host/xhci.h                            |  14 +-
 drivers/usb/serial/Kconfig                         |   1 +
 drivers/usb/serial/pl2303.c                        |   2 +
 drivers/usb/serial/pl2303.h                        |   3 +
 drivers/usb/serial/usb-serial-simple.c             |   7 +
 drivers/usb/storage/ene_ub6250.c                   | 155 ++++---
 drivers/usb/storage/realtek_cr.c                   |   2 +-
 drivers/usb/typec/tipd/core.c                      |   5 +
 drivers/usb/typec/tipd/tps6598x.h                  |   1 +
 drivers/vdpa/mlx5/net/mlx5_vnet.c                  |   7 +-
 drivers/vfio/pci/vfio_pci_core.c                   |  61 +++
 drivers/vhost/iotlb.c                              |   6 +-
 drivers/video/fbdev/atafb.c                        |  12 +-
 drivers/video/fbdev/atmel_lcdfb.c                  |  11 +-
 drivers/video/fbdev/cirrusfb.c                     |  16 +-
 drivers/video/fbdev/controlfb.c                    |   2 +
 drivers/video/fbdev/core/fbcvt.c                   |  53 +--
 drivers/video/fbdev/core/fbmem.c                   |  29 +-
 drivers/video/fbdev/matrox/matroxfb_base.c         |   2 +-
 drivers/video/fbdev/nvidia/nv_i2c.c                |   2 +-
 .../fbdev/omap2/omapfb/displays/connector-dvi.c    |   1 +
 .../fbdev/omap2/omapfb/displays/panel-dsi-cm.c     |   8 +-
 .../omap2/omapfb/displays/panel-sony-acx565akm.c   |   2 +-
 .../omap2/omapfb/displays/panel-tpo-td043mtea1.c   |   4 +-
 drivers/video/fbdev/sm712fb.c                      |  46 +-
 drivers/video/fbdev/smscufx.c                      |   3 +-
 drivers/video/fbdev/udlfb.c                        |   8 +-
 drivers/video/fbdev/w100fb.c                       |  15 +-
 drivers/virt/acrn/hsm.c                            |  20 +-
 drivers/virt/acrn/mm.c                             |  24 ++
 drivers/virtio/virtio.c                            |   5 +-
 drivers/virtio/virtio_pci_common.c                 |  48 +--
 drivers/virtio/virtio_pci_common.h                 |   7 +-
 drivers/virtio/virtio_pci_legacy.c                 |   5 +-
 drivers/virtio/virtio_pci_modern.c                 |   6 +-
 drivers/watchdog/rti_wdt.c                         |   1 +
 fs/binfmt_elf.c                                    |  90 ++--
 fs/binfmt_elf_fdpic.c                              |  18 +-
 fs/btrfs/block-group.c                             |   8 +-
 fs/btrfs/compression.c                             |  20 +-
 fs/btrfs/disk-io.c                                 |  26 +-
 fs/btrfs/extent_io.c                               |  22 +-
 fs/btrfs/file-item.c                               |  38 +-
 fs/btrfs/inode.c                                   |   8 +-
 fs/btrfs/reflink.c                                 |   7 +-
 fs/btrfs/space-info.c                              |   3 +-
 fs/btrfs/volumes.c                                 |  48 ++-
 fs/buffer.c                                        |   8 +-
 fs/cifs/cifs_swn.c                                 |   6 +-
 fs/cifs/cifsfs.c                                   |  14 +-
 fs/cifs/cifsproto.h                                |   3 +
 fs/cifs/connect.c                                  |  56 ++-
 fs/cifs/dfs_cache.c                                |   2 +-
 fs/cifs/file.c                                     |  10 +
 fs/cifs/smb1ops.c                                  |   2 +-
 fs/cifs/smb2ops.c                                  | 148 ++++---
 fs/cifs/smb2pdu.c                                  |   6 +-
 fs/cifs/transport.c                                |   2 +-
 fs/coredump.c                                      |  86 +++-
 fs/erofs/sysfs.c                                   |   8 +-
 fs/exec.c                                          |  26 +-
 fs/ext2/super.c                                    |   6 +-
 fs/ext4/inline.c                                   |   9 +-
 fs/ext4/inode.c                                    |  25 ++
 fs/ext4/mballoc.c                                  | 128 +++---
 fs/ext4/namei.c                                    |  10 +-
 fs/ext4/super.c                                    |  53 ++-
 fs/f2fs/checkpoint.c                               |   8 +-
 fs/f2fs/compress.c                                 |   5 +-
 fs/f2fs/data.c                                     |   8 +-
 fs/f2fs/debug.c                                    |  18 +-
 fs/f2fs/f2fs.h                                     |   1 +
 fs/f2fs/file.c                                     |   5 +-
 fs/f2fs/gc.c                                       |   4 +-
 fs/f2fs/inode.c                                    |   7 +-
 fs/f2fs/node.c                                     |   6 +-
 fs/f2fs/segment.c                                  |   7 +
 fs/f2fs/super.c                                    |  10 +-
 fs/f2fs/sysfs.c                                    |   2 +-
 fs/file.c                                          |  31 +-
 fs/gfs2/bmap.c                                     |   2 +-
 fs/gfs2/file.c                                     |   3 +-
 fs/gfs2/inode.c                                    |   2 +-
 fs/gfs2/rgrp.c                                     |  10 +-
 fs/gfs2/rgrp.h                                     |   2 +-
 fs/gfs2/super.c                                    |   2 +-
 fs/io_uring.c                                      |  21 +-
 fs/iomap/buffered-io.c                             |   3 +-
 fs/jffs2/build.c                                   |   4 +-
 fs/jffs2/fs.c                                      |   2 +-
 fs/jffs2/scan.c                                    |   6 +-
 fs/jfs/jfs_dmap.c                                  |   7 +
 fs/nfs/callback_proc.c                             |  27 +-
 fs/nfs/callback_xdr.c                              |   4 -
 fs/nfs/nfs2xdr.c                                   |   2 +-
 fs/nfs/nfs3xdr.c                                   |  22 +-
 fs/nfs/nfs4proc.c                                  |   1 +
 fs/nfs/pagelist.c                                  |   1 +
 fs/nfs/pnfs.c                                      |  11 +
 fs/nfs/pnfs.h                                      |   2 +
 fs/nfs/proc.c                                      |   1 +
 fs/nfs/write.c                                     |   7 +-
 fs/nfsd/filecache.c                                |   6 +-
 fs/nfsd/nfs4state.c                                |  12 +-
 fs/nfsd/nfsproc.c                                  |   2 +-
 fs/nfsd/xdr.h                                      |   2 +-
 fs/ntfs/inode.c                                    |   4 +
 fs/ocfs2/quota_global.c                            |  23 +-
 fs/ocfs2/quota_local.c                             |   2 -
 fs/proc/bootconfig.c                               |   2 +
 fs/pstore/platform.c                               |  38 +-
 fs/ubifs/dir.c                                     | 238 ++++++-----
 fs/ubifs/file.c                                    |  14 +-
 fs/ubifs/io.c                                      |  34 +-
 fs/ubifs/ioctl.c                                   |   2 +-
 fs/ubifs/journal.c                                 |  52 ++-
 include/drm/drm_connector.h                        |  12 +-
 include/drm/drm_dp_helper.h                        |   4 +-
 include/drm/drm_modeset_lock.h                     |   1 +
 include/linux/atomic/atomic-arch-fallback.h        |  38 +-
 include/linux/binfmts.h                            |   3 +
 include/linux/blk-cgroup.h                         |  17 +
 include/linux/blk_types.h                          |   3 +-
 include/linux/coredump.h                           |   5 +-
 include/linux/fb.h                                 |   1 +
 include/linux/lsm_hook_defs.h                      |   2 +
 include/linux/lsm_hooks.h                          |   5 +
 include/linux/migrate.h                            |   8 +
 include/linux/mtd/rawnand.h                        |   2 +
 include/linux/netfilter_netdev.h                   |   2 +-
 include/linux/nvme.h                               |   1 +
 include/linux/pci.h                                |   1 +
 include/linux/pstore.h                             |   6 +-
 include/linux/randomize_kstack.h                   |  16 +-
 include/linux/sched.h                              |  19 +-
 include/linux/security.h                           |   8 +
 include/linux/serial_core.h                        |   2 +
 include/linux/skbuff.h                             |  28 +-
 include/linux/skmsg.h                              |  13 +-
 include/linux/soc/ti/ti_sci_protocol.h             |   2 +-
 include/linux/sunrpc/xdr.h                         |   2 +
 include/linux/sunrpc/xprt.h                        |   3 +
 include/linux/sunrpc/xprtsock.h                    |   2 +-
 include/linux/xarray.h                             |   1 +
 include/net/netfilter/nf_conntrack_helper.h        |   1 +
 include/net/netfilter/nf_flow_table.h              |  18 +
 include/scsi/scsi_device.h                         |   1 +
 include/sound/intel-nhlt.h                         |  22 +-
 include/sound/pcm.h                                |   1 +
 include/trace/events/ext4.h                        |  78 ++--
 include/trace/events/rxrpc.h                       |   8 +-
 include/trace/events/sched.h                       |  11 +-
 include/uapi/linux/bpf.h                           |  12 +-
 include/uapi/linux/loop.h                          |   4 +-
 include/uapi/linux/omap3isp.h                      |  21 +-
 include/uapi/linux/rfkill.h                        |  14 +-
 include/uapi/linux/rseq.h                          |  20 +-
 include/uapi/linux/serial_core.h                   |   3 +
 kernel/audit.h                                     |   4 +
 kernel/auditsc.c                                   |  87 +++-
 kernel/bpf/btf.c                                   |  55 ++-
 kernel/bpf/stackmap.c                              |  56 ++-
 kernel/debug/kdb/kdb_support.c                     |   2 +-
 kernel/dma/debug.c                                 |   4 +-
 kernel/dma/swiotlb.c                               |  11 +-
 kernel/events/core.c                               |   3 +
 kernel/livepatch/core.c                            |   4 +-
 kernel/locking/lockdep.c                           |  38 +-
 kernel/locking/lockdep_internals.h                 |   6 +-
 kernel/locking/lockdep_proc.c                      |  51 ++-
 kernel/power/hibernate.c                           |   2 +-
 kernel/power/suspend_test.c                        |   8 +-
 kernel/printk/printk.c                             |   6 +-
 kernel/ptrace.c                                    |  47 ++-
 kernel/rcu/rcu_segcblist.h                         |   4 +-
 kernel/rcu/tree.c                                  |  71 ++--
 kernel/rcu/tree.h                                  |   4 +-
 kernel/resource.c                                  |  41 +-
 kernel/rseq.c                                      |   8 +-
 kernel/sched/core.c                                |   5 +-
 kernel/sched/cpuacct.c                             |   3 +-
 kernel/sched/cpufreq_schedutil.c                   |  11 +-
 kernel/sched/deadline.c                            |  12 +-
 kernel/sched/debug.c                               |  10 -
 kernel/sched/fair.c                                |  18 +-
 kernel/sched/rt.c                                  |  32 +-
 kernel/sched/sched.h                               | 181 ++++----
 kernel/trace/fgraph.c                              |   4 +-
 kernel/trace/ftrace.c                              |   4 +-
 kernel/trace/trace.c                               |   9 +-
 kernel/trace/trace_events.c                        |  96 ++++-
 kernel/trace/trace_osnoise.c                       |   4 +-
 kernel/trace/trace_sched_switch.c                  |   1 +
 kernel/trace/trace_sched_wakeup.c                  |   1 +
 kernel/watch_queue.c                               |   4 +-
 lib/kunit/try-catch.c                              |   2 +-
 lib/raid6/test/Makefile                            |   4 +-
 lib/raid6/test/test.c                              |   1 -
 lib/test_kmod.c                                    |   1 +
 lib/test_lockup.c                                  |  11 +-
 lib/test_xarray.c                                  |  22 +
 lib/vsprintf.c                                     |  48 ++-
 lib/xarray.c                                       |   4 +
 mm/kmemleak.c                                      |   9 +-
 mm/madvise.c                                       |   3 +-
 mm/memcontrol.c                                    |   2 +-
 mm/memory.c                                        |  57 ++-
 mm/mempolicy.c                                     |   8 +-
 mm/migrate.c                                       |  47 +--
 mm/mlock.c                                         |   7 +-
 mm/mmap.c                                          |   2 +-
 mm/page_alloc.c                                    |   9 +-
 mm/slab.c                                          |   1 +
 mm/usercopy.c                                      |   5 +-
 mm/vmstat.c                                        |  13 +-
 net/ax25/af_ax25.c                                 |  18 +-
 net/ax25/ax25_subr.c                               |  20 +-
 net/bluetooth/eir.h                                |   5 +
 net/bluetooth/hci_conn.c                           |   2 +
 net/bluetooth/hci_event.c                          |  13 +-
 net/bluetooth/hci_sync.c                           |   2 +-
 net/bluetooth/mgmt.c                               |  18 +-
 net/can/isotp.c                                    |  69 +--
 net/core/skbuff.c                                  |  51 ++-
 net/core/skmsg.c                                   |  17 +-
 net/dsa/dsa2.c                                     |   5 +
 net/dsa/switch.c                                   |  40 +-
 net/ipv4/route.c                                   |  18 +-
 net/ipv4/tcp_bpf.c                                 |  14 +-
 net/ipv4/tcp_output.c                              |   5 +-
 net/mac80211/ieee80211_i.h                         |   2 +-
 net/mac80211/mesh.c                                |   2 +-
 net/mac80211/mlme.c                                |  11 +-
 net/mac80211/util.c                                |  27 +-
 net/mptcp/protocol.c                               |   1 +
 net/netfilter/nf_conntrack_helper.c                |   6 +
 net/netfilter/nf_conntrack_proto_tcp.c             |  17 +-
 net/netfilter/nf_flow_table_inet.c                 |  17 +
 net/netfilter/nf_flow_table_ip.c                   |  18 -
 net/netfilter/nft_ct.c                             |   3 +
 net/netlink/af_netlink.c                           |   2 +
 net/openvswitch/conntrack.c                        | 118 +++---
 net/openvswitch/flow_netlink.c                     |   4 +-
 net/rfkill/core.c                                  |  48 ++-
 net/rxrpc/ar-internal.h                            |  15 +-
 net/rxrpc/call_event.c                             |   2 +-
 net/rxrpc/call_object.c                            |  40 +-
 net/rxrpc/server_key.c                             |   7 +-
 net/sched/act_ct.c                                 |  15 +-
 net/sctp/sm_statefuns.c                            |   8 +-
 net/sunrpc/clnt.c                                  |   6 +-
 net/sunrpc/sched.c                                 |  22 +-
 net/sunrpc/sysfs.c                                 |  55 ++-
 net/sunrpc/xprt.c                                  |  10 +
 net/sunrpc/xprtrdma/transport.c                    |   8 +-
 net/sunrpc/xprtsock.c                              |  56 ++-
 net/tipc/socket.c                                  |   3 +-
 net/unix/af_unix.c                                 |  16 +-
 net/vmw_vsock/virtio_transport.c                   |  11 +-
 net/x25/af_x25.c                                   |  11 +-
 net/xdp/xsk.c                                      |  69 ++-
 net/xdp/xsk_buff_pool.c                            |   8 +-
 samples/bpf/xdpsock_user.c                         |   6 +-
 samples/landlock/sandboxer.c                       |   1 +
 scripts/atomic/fallbacks/read_acquire              |  11 +-
 scripts/atomic/fallbacks/set_release               |   7 +-
 scripts/dtc/Makefile                               |   2 +-
 scripts/gcc-plugins/stackleak_plugin.c             |  25 +-
 scripts/mod/modpost.c                              |   2 +-
 security/integrity/evm/evm_main.c                  |   2 +-
 security/keys/keyctl_pkey.c                        |  14 +-
 security/keys/trusted-keys/trusted_core.c          |   6 +-
 security/landlock/syscalls.c                       |   2 +-
 security/security.c                                |  24 +-
 security/selinux/hooks.c                           | 180 +++++---
 security/selinux/include/policycap.h               |   1 +
 security/selinux/include/policycap_names.h         |   3 +-
 security/selinux/include/security.h                |   7 +
 security/selinux/selinuxfs.c                       |   2 +
 security/selinux/xfrm.c                            |   2 +-
 security/smack/smack_lsm.c                         |   2 +-
 security/tomoyo/load_policy.c                      |   4 +-
 sound/core/pcm.c                                   |   1 +
 sound/core/pcm_lib.c                               |   9 +-
 sound/core/pcm_native.c                            |  39 +-
 sound/firewire/fcp.c                               |   4 +-
 sound/hda/intel-dsp-config.c                       |  36 +-
 sound/hda/intel-nhlt.c                             |  22 +
 sound/isa/cs423x/cs4236.c                          |   8 +-
 sound/pci/hda/hda_intel.c                          |  10 +-
 sound/pci/hda/patch_hdmi.c                         |   8 +-
 sound/pci/hda/patch_realtek.c                      |  15 +-
 sound/soc/amd/acp/acp-mach-common.c                |   2 +
 sound/soc/amd/vangogh/acp5x-mach.c                 |   1 +
 sound/soc/amd/vangogh/acp5x-pcm-dma.c              |  68 +--
 sound/soc/atmel/atmel_ssc_dai.c                    |   5 +-
 sound/soc/atmel/mikroe-proto.c                     |  20 +-
 sound/soc/atmel/sam9g20_wm8731.c                   |   1 +
 sound/soc/atmel/sam9x5_wm8731.c                    |  13 +-
 sound/soc/codecs/Kconfig                           |   5 +
 sound/soc/codecs/cs35l41.c                         |   6 +-
 sound/soc/codecs/cs42l42.c                         |  14 +-
 sound/soc/codecs/lpass-rx-macro.c                  |  14 +-
 sound/soc/codecs/lpass-tx-macro.c                  |   2 +
 sound/soc/codecs/lpass-va-macro.c                  |   4 +-
 sound/soc/codecs/lpass-wsa-macro.c                 |   2 +
 sound/soc/codecs/max98927.c                        |   1 +
 sound/soc/codecs/msm8916-wcd-analog.c              |  22 +-
 sound/soc/codecs/msm8916-wcd-digital.c             |   5 +-
 sound/soc/codecs/mt6358.c                          |   4 +
 sound/soc/codecs/rk817_codec.c                     |   6 +-
 sound/soc/codecs/rt5663.c                          |   2 +
 sound/soc/codecs/rt5682s.c                         |  26 +-
 sound/soc/codecs/rt5682s.h                         |   1 -
 sound/soc/codecs/wcd934x.c                         |  12 +-
 sound/soc/codecs/wcd938x.c                         |  10 +-
 sound/soc/codecs/wm8350.c                          |  28 +-
 sound/soc/dwc/dwc-i2s.c                            |  17 +-
 sound/soc/fsl/fsl_spdif.c                          |   2 +
 sound/soc/fsl/imx-es8328.c                         |   1 +
 sound/soc/generic/simple-card-utils.c              |  15 +
 sound/soc/intel/boards/sof_es8336.c                |  63 ++-
 sound/soc/intel/boards/sof_sdw.c                   |   2 +-
 sound/soc/intel/common/soc-acpi-intel-bxt-match.c  |   7 +-
 sound/soc/intel/common/soc-acpi-intel-cml-match.c  |   7 +-
 sound/soc/intel/common/soc-acpi-intel-glk-match.c  |   7 +-
 sound/soc/intel/common/soc-acpi-intel-jsl-match.c  |   7 +-
 sound/soc/intel/common/soc-acpi-intel-tgl-match.c  |   7 +-
 sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c |  23 +-
 .../mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c  |  18 +-
 .../mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c  |   4 +-
 sound/soc/mxs/mxs-saif.c                           |   5 +-
 sound/soc/mxs/mxs-sgtl5000.c                       |   3 +
 sound/soc/rockchip/rockchip_i2s.c                  |  15 +-
 sound/soc/rockchip/rockchip_i2s_tdm.c              |  12 +-
 sound/soc/sh/fsi.c                                 |  19 +-
 sound/soc/sh/rz-ssi.c                              |  73 ++--
 sound/soc/soc-compress.c                           |   5 +
 sound/soc/soc-core.c                               |   2 +-
 sound/soc/soc-generic-dmaengine-pcm.c              |   6 +-
 sound/soc/soc-topology.c                           |   3 +-
 sound/soc/sof/debug.c                              |   2 +-
 sound/soc/sof/imx/imx8m.c                          |   1 +
 sound/soc/sof/intel/Kconfig                        |   1 +
 sound/soc/sof/intel/hda-dai.c                      |  13 +
 sound/soc/sof/intel/hda-loader.c                   |  11 +-
 sound/soc/sof/intel/hda-pcm.c                      |   1 +
 sound/soc/sof/intel/hda.c                          |  61 +--
 sound/soc/ti/davinci-i2s.c                         |   5 +-
 sound/soc/xilinx/xlnx_formatter_pcm.c              |  25 ++
 sound/spi/at73c213.c                               |  27 +-
 tools/bpf/bpftool/btf.c                            |   2 +-
 tools/bpf/bpftool/gen.c                            |   2 +-
 tools/bpf/bpftool/link.c                           |   3 +-
 tools/bpf/bpftool/map.c                            |  42 +-
 tools/bpf/bpftool/pids.c                           |   3 +-
 tools/bpf/bpftool/prog.c                           |   2 +-
 tools/include/uapi/linux/bpf.h                     |   4 +-
 tools/lib/bpf/bpf_tracing.h                        |   4 +-
 tools/lib/bpf/btf.h                                |  22 +-
 tools/lib/bpf/btf_dump.c                           |  11 +-
 tools/lib/bpf/libbpf.c                             |  47 ++-
 tools/lib/bpf/libbpf.map                           |   2 +-
 tools/lib/bpf/netlink.c                            |  63 ++-
 tools/lib/bpf/xsk.c                                |  11 +
 tools/lib/perf/tests/test-evlist.c                 |   8 +-
 tools/perf/arch/x86/util/evlist.c                  |  18 +-
 tools/perf/builtin-stat.c                          |   2 +-
 tools/perf/pmu-events/arch/x86/skylakex/cache.json | 111 ++---
 .../arch/x86/skylakex/floating-point.json          |  24 +-
 .../pmu-events/arch/x86/skylakex/frontend.json     |  18 +-
 .../perf/pmu-events/arch/x86/skylakex/memory.json  |  96 ++---
 .../pmu-events/arch/x86/skylakex/pipeline.json     |  11 +
 .../pmu-events/arch/x86/skylakex/skx-metrics.json  | 461 ++++++++++++++++++---
 .../pmu-events/arch/x86/skylakex/uncore-other.json |  23 +
 tools/perf/tests/shell/test_arm_callgraph_fp.sh    |  68 +++
 tools/testing/cxl/Kbuild                           |   2 +-
 tools/testing/cxl/test/cxl.c                       |   2 +-
 tools/testing/selftests/bpf/prog_tests/bind_perm.c |  20 +-
 tools/testing/selftests/bpf/progs/bpf_misc.h       |  19 +
 .../testing/selftests/bpf/progs/test_probe_user.c  |  15 +-
 .../testing/selftests/bpf/progs/test_sock_fields.c |   2 +-
 tools/testing/selftests/bpf/test_lirc_mode2.sh     |   5 +-
 tools/testing/selftests/bpf/test_lwt_ip_encap.sh   |  10 +-
 .../selftests/bpf/test_xdp_redirect_multi.sh       |  60 +--
 tools/testing/selftests/bpf/xdpxceiver.c           |   5 +-
 tools/testing/selftests/lkdtm/config               |   1 +
 .../testing/selftests/net/af_unix/test_unix_oob.c  |   6 +-
 tools/testing/selftests/net/mptcp/mptcp_connect.sh |  19 +
 .../testing/selftests/net/test_vxlan_under_vrf.sh  |   8 +-
 tools/testing/selftests/net/timestamping.c         |   4 +-
 tools/testing/selftests/net/tls.c                  |   6 +
 tools/testing/selftests/rcutorture/bin/torture.sh  |   4 +-
 tools/testing/selftests/sgx/Makefile               |   2 +-
 tools/testing/selftests/sgx/load.c                 |   9 +-
 tools/testing/selftests/sgx/main.c                 |   5 +-
 tools/testing/selftests/vm/Makefile                |   6 +-
 tools/testing/selftests/vm/userfaultfd.c           |   3 +
 tools/testing/selftests/x86/Makefile               |   6 +-
 tools/testing/selftests/x86/check_cc.sh            |   2 +-
 tools/tracing/rtla/src/osnoise_hist.c              |   2 +-
 virt/kvm/kvm_main.c                                |  13 +
 virt/kvm/pfncache.c                                |   1 +
 1147 files changed, 11879 insertions(+), 6157 deletions(-)
author maintainer
#1 lore raw

PATCH 1/1126 Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

From: Linus Torvalds <[email protected]>

commit bddac7c1e02ba47f0570e494c9289acea3062cc1 upstream.

This reverts commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13.

It turns out this breaks at least the ath9k wireless driver, and possibly others.

What the ath9k driver does on packet receive is to set up the DMA transfer with:

int ath_rx_init(..)
..

                bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
                                                 common->rx_bufsize,
                                                 DMA_FROM_DEVICE);

and then the receive logic (through ath_rx_tasklet()) will fetch incoming packets

static bool ath_edma_get_buffers(..)
..

        dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
                                common->rx_bufsize, DMA_FROM_DEVICE);

        ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
        if (ret == -EINPROGRESS) {
                /*let device gain the buffer again*/
                dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
                                common->rx_bufsize, DMA_FROM_DEVICE);
                return false;
        }

and it's worth noting how that first DMA sync:

    dma_sync_single_for_cpu(..DMA_FROM_DEVICE);

is there to make sure the CPU can read the DMA buffer (possibly by copying it from the bounce buffer area, or by doing some cache flush). The iommu correctly turns that into a "copy from bounce bufer" so that the driver can look at the state of the packets.

In the meantime, the device may continue to write to the DMA buffer, but we at least have a snapshot of the state due to that first DMA sync.

But that _second_ DMA sync:

    dma_sync_single_for_device(..DMA_FROM_DEVICE);

is telling the DMA mapping that the CPU wasn't interested in the area because the packet wasn't there. In the case of a DMA bounce buffer, that is a no-op.

Note how it's not a sync for the CPU (the "for_device()" part), and it's not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part).

Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab47
broke: it made the code bounce the buffer unconditionally, and changed the DMA_FROM_DEVICE to just unconditionally and illogically be DMA_TO_DEVICE.

[ Side note: purely within the confines of the swiotlb driver it wasn't
entirely illogical: The reason it did that odd DMA_FROM_DEVICE -> DMA_TO_DEVICE conversion thing is because inside the swiotlb driver, it uses just a swiotlb_bounce() helper that doesn't care about the whole distinction of who the sync is for - only which direction to bounce.

So it took the "sync for device" to mean that the CPU must have been the one writing, and thought it meant DMA_TO_DEVICE. ]

Also note how the commentary in that commit was wrong, probably due to that whole confusion, claiming that the commit makes the swiotlb code

"bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer"

which is nonsensical for two reasons:

- that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was exactly when it always did - and should do - the bounce.

- since this is a sync for the device (not for the CPU), we're clearly fundamentally not coping back stale data from the bounce buffers at all, because we'd be copying *to* the bounce buffers.

So that commit was just very confused. It confused the direction of the synchronization (to the device, not the cpu) with the direction of the DMA (from the device).

Cc Halil Pasic <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Kalle Valo <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Toke Høiland-Jørgensen <[email protected]>
Cc Maxime Bizon <[email protected]>
Cc Johannes Berg <[email protected]>
---
 Documentation/core-api/dma-attributes.rst |    8 ++++++++
 include/linux/dma-mapping.h               |    8 ++++++++
 kernel/dma/swiotlb.c                      |   23 ++++++++---------------
 3 files changed, 24 insertions(+), 15 deletions(-)
Documentation/core-api/dma-attributes.rst +8 -0
@@ -130,3 +130,11 @@ accesses to DMA buffers in both privileg
 subsystem that the buffer is fully accessible at the elevated privilege
 level (and ideally inaccessible or at least read-only at the
 lesser-privileged levels).
+
+DMA_ATTR_OVERWRITE
+------------------
+
+This is a hint to the DMA-mapping subsystem that the device is expected to
+overwrite the entire mapped size, thus the caller does not require any of the
+previous buffer contents to be preserved. This allows bounce-buffering
+implementations to optimise DMA_FROM_DEVICE transfers.
include/linux/dma-mapping.h +8 -0
@@ -62,6 +62,14 @@
 #define DMA_ATTR_PRIVILEGED		(1UL << 9)
 
 /*
+ * This is a hint to the DMA-mapping subsystem that the device is expected
+ * to overwrite the entire mapped size, thus the caller does not require any
+ * of the previous buffer contents to be preserved. This allows
+ * bounce-buffering implementations to optimise DMA_FROM_DEVICE transfers.
+ */
+#define DMA_ATTR_OVERWRITE		(1UL << 10)
+
+/*
  * A dma_addr_t can hold any valid DMA or bus address for the platform.  It can
  * be given to a device to use as a DMA source or target.  It is specific to a
  * given device and there may be a translation between the CPU physical address
kernel/dma/swiotlb.c +8 -15
@@ -627,14 +627,10 @@ phys_addr_t swiotlb_tbl_map_single(struc
 	for (i = 0; i < nr_slots(alloc_size + offset); i++)
 		mem->slots[index + i].orig_addr = slot_addr(orig_addr, i);
 	tlb_addr = slot_addr(mem->start, index) + offset;
-	/*
-	 * When dir == DMA_FROM_DEVICE we could omit the copy from the orig
-	 * to the tlb buffer, if we knew for sure the device will
-	 * overwirte the entire current content. But we don't. Thus
-	 * unconditional bounce may prevent leaking swiotlb content (i.e.
-	 * kernel memory) to user-space.
-	 */
-	swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
+	    (!(attrs & DMA_ATTR_OVERWRITE) || dir == DMA_TO_DEVICE ||
+	    dir == DMA_BIDIRECTIONAL))
+		swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
 	return tlb_addr;
 }
 
@@ -701,13 +697,10 @@ void swiotlb_tbl_unmap_single(struct dev
 void swiotlb_sync_single_for_device(struct device *dev, phys_addr_t tlb_addr,
 		size_t size, enum dma_data_direction dir)
 {
-	/*
-	 * Unconditional bounce is necessary to avoid corruption on
-	 * sync_*_for_cpu or dma_ummap_* when the device didn't overwrite
-	 * the whole lengt of the bounce buffer.
-	 */
-	swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE);
-	BUG_ON(!valid_dma_direction(dir));
+	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
+		swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE);
+	else
+		BUG_ON(dir != DMA_FROM_DEVICE);
 }
 
 void swiotlb_sync_single_for_cpu(struct device *dev, phys_addr_t tlb_addr,
author maintainer
#2 lore raw

PATCH 2/1126 USB: serial: pl2303: add IBM device IDs

In reply to Greg Kroah-Hartman

From: Eddie James <[email protected]>

commit e1d15646565b284e9ef2433234d6cfdaf66695f1 upstream.

IBM manufactures a PL2303 device for UPS communications. Add the vendor and product IDs so that the PL2303 driver binds to the device.

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    3 +++
 2 files changed, 4 insertions(+)
drivers/usb/serial/pl2303.c +1 -0
@@ -116,6 +116,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
drivers/usb/serial/pl2303.h +3 -0
@@ -35,6 +35,9 @@
 #define ATEN_PRODUCT_UC232B	0x2022
 #define ATEN_PRODUCT_ID2	0x2118
 
+#define IBM_VENDOR_ID		0x04b3
+#define IBM_PRODUCT_ID		0x4016
+
 #define IODATA_VENDOR_ID	0x04bb
 #define IODATA_PRODUCT_ID	0x0a03
 #define IODATA_PRODUCT_ID_RSAQ5	0x0a0e
author maintainer
#3 lore raw

PATCH 3/1126 dt-bindings: usb: hcd: correct usb-device path

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

commit 801109b1a37ad99784e6370cc7e462596f505ea3 upstream.

The usb-device.yaml reference is absolute so it should use /schemas part in path.

---
 Documentation/devicetree/bindings/usb/usb-hcd.yaml |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/usb/usb-hcd.yaml +1 -1
@@ -33,7 +33,7 @@ patternProperties:
   "^.*@[0-9a-f]{1,2}$":
     description: The hard wired USB devices
     type: object
-    $ref: /usb/usb-device.yaml
+    $ref: /schemas/usb/usb-device.yaml
 
 additionalProperties: true
 
author maintainer
#4 lore raw

PATCH 4/1126 USB: serial: pl2303: fix GS type detection

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 5b6ab28d06780c87320ceade61698bb6719c85db upstream.

At least some PL2303GS have a bcdDevice of 0x605 instead of 0x100 as the datasheet claims. Add it to the list of known release numbers for the HXN (G) type.

Fixes 894758d0571d ("USB: serial: pl2303: tighten type HXN (G) detection")
---
 drivers/usb/serial/pl2303.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/serial/pl2303.c +1 -0
@@ -436,6 +436,7 @@ static int pl2303_detect_type(struct usb
 		case 0x105:
 		case 0x305:
 		case 0x405:
+		case 0x605:
 			/*
 			 * Assume it's an HXN-type if the device doesn't
 			 * support the old read request value.
author maintainer
#5 lore raw

PATCH 5/1126 USB: serial: simple: add Nokia phone driver

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit c4b9c570965f75d0d55e639747f1e5ccdad2fae0 upstream.

Add a new "simple" driver for certain Nokia phones, including Nokia 130 (RM-1035) which exposes two serial ports in "charging only" mode:

Bus 001 Device 009: ID 0421:069a Nokia Mobile Phones 130 [RM-1035] (Charging only) Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0421 Nokia Mobile Phones
  idProduct          0x069a 130 [RM-1035] (Charging only)
  bcdDevice            1.00
  iManufacturer           1 Nokia
  iProduct                2 Nokia 130 (RM-1035)
  iSerial                 0
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0037
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

---
 drivers/usb/serial/Kconfig             |    1 +
 drivers/usb/serial/usb-serial-simple.c |    7 +++++++
 2 files changed, 8 insertions(+)
drivers/usb/serial/Kconfig +1 -0
@@ -66,6 +66,7 @@ config USB_SERIAL_SIMPLE
 		- Libtransistor USB console
 		- a number of Motorola phones
 		- Motorola Tetra devices
+		- Nokia mobile phones
 		- Novatel Wireless GPS receivers
 		- Siemens USB/MPI adapter.
 		- ViVOtech ViVOpay USB device.
drivers/usb/serial/usb-serial-simple.c +7 -0
@@ -91,6 +91,11 @@ DEVICE(moto_modem, MOTO_IDS);
 	{ USB_DEVICE(0x0cad, 0x9016) }	/* TPG2200 */
 DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
 
+/* Nokia mobile phone driver */
+#define NOKIA_IDS()			\
+	{ USB_DEVICE(0x0421, 0x069a) }	/* Nokia 130 (RM-1035) */
+DEVICE(nokia, NOKIA_IDS);
+
 /* Novatel Wireless GPS driver */
 #define NOVATEL_IDS()			\
 	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
@@ -123,6 +128,7 @@ static struct usb_serial_driver * const
 	&vivopay_device,
 	&moto_modem_device,
 	&motorola_tetra_device,
+	&nokia_device,
 	&novatel_gps_device,
 	&hp4x_device,
 	&suunto_device,
@@ -140,6 +146,7 @@ static const struct usb_device_id id_tab
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
 	MOTOROLA_TETRA_IDS(),
+	NOKIA_IDS(),
 	NOVATEL_IDS(),
 	HP4X_IDS(),
 	SUUNTO_IDS(),
author maintainer
#6 lore raw

PATCH 6/1126 mm: kfence: fix missing objcg housekeeping for SLAB

In reply to Greg Kroah-Hartman

From: Muchun Song <[email protected]>

commit ae085d7f9365de7da27ab5c0d16b12d51ea7fca9 upstream.

The objcg is not cleared and put for kfence object when it is freed, which could lead to memory leak for struct obj_cgroup and wrong statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B.

Since the last freed object's objcg is not cleared, mem_cgroup_from_obj() could return the wrong memcg when this kfence object, which is not charged to any objcgs, is reallocated to other users.

A real word issue [1] is caused by this bug.

Reported-by [email protected]
Fixes d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB")
Cc Dmitry Vyukov <[email protected]>
Cc Marco Elver <[email protected]>
Cc Andrew Morton <[email protected]>
---
 mm/slab.c |    1 +
 1 file changed, 1 insertion(+)
mm/slab.c +1 -0
@@ -3421,6 +3421,7 @@ static __always_inline void __cache_free
 
 	if (is_kfence_address(objp)) {
 		kmemleak_free_recursive(objp, cachep->flags);
+		memcg_slab_free_hook(cachep, &objp, 1);
 		__kfence_free(objp);
 		return;
 	}
author maintainer
#7 lore raw

PATCH 7/1126 locking/lockdep: Avoid potential access of invalid memory in lock_class

In reply to Greg Kroah-Hartman

From: Waiman Long <[email protected]>

commit 61cc4534b6550997c97a03759ab46b29d44c0017 upstream.

It was found that reading /proc/lockdep after a lockdep splat may potentially cause an access to freed memory if lockdep_unregister_key() is called after the splat but before access to /proc/lockdep [1]. This is due to the fact that graph_lock() call in lockdep_unregister_key() fails after the clearing of debug_locks by the splat process.

After lockdep_unregister_key() is called, the lock_name may be freed but the corresponding lock_class structure still have a reference to it. That invalid memory pointer will then be accessed when /proc/lockdep is read by a user and a use-after-free (UAF) error will be reported if KASAN is enabled.

To fix this problem, lockdep_unregister_key() is now modified to always search for a matching key irrespective of the debug_locks state and zap the corresponding lock class if a matching one is found.

[1] https://lore.kernel.org/lkml/[email protected]/

Fixes 8b39adbee805 ("locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again")
Cc Cheng-Jui Wang <[email protected]>
---
 kernel/locking/lockdep.c |   24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
kernel/locking/lockdep.c +15 -9
@@ -6290,7 +6290,13 @@ void lockdep_reset_lock(struct lockdep_m
 		lockdep_reset_lock_reg(lock);
 }
 
-/* Unregister a dynamically allocated key. */
+/*
+ * Unregister a dynamically allocated key.
+ *
+ * Unlike lockdep_register_key(), a search is always done to find a matching
+ * key irrespective of debug_locks to avoid potential invalid access to freed
+ * memory in lock_class entry.
+ */
 void lockdep_unregister_key(struct lock_class_key *key)
 {
 	struct hlist_head *hash_head = keyhashentry(key);
@@ -6305,10 +6311,8 @@ void lockdep_unregister_key(struct lock_
 		return;
 
 	raw_local_irq_save(flags);
-	if (!graph_lock())
-		goto out_irq;
+	lockdep_lock();
 
-	pf = get_pending_free();
 	hlist_for_each_entry_rcu(k, hash_head, hash_entry) {
 		if (k == key) {
 			hlist_del_rcu(&k->hash_entry);
@@ -6316,11 +6320,13 @@ void lockdep_unregister_key(struct lock_
 			break;
 		}
 	}
-	WARN_ON_ONCE(!found);
-	__lockdep_free_key_range(pf, key, 1);
-	call_rcu_zapped(pf);
-	graph_unlock();
-out_irq:
+	WARN_ON_ONCE(!found && debug_locks);
+	if (found) {
+		pf = get_pending_free();
+		__lockdep_free_key_range(pf, key, 1);
+		call_rcu_zapped(pf);
+	}
+	lockdep_unlock();
 	raw_local_irq_restore(flags);
 
 	/* Wait until is_dynamic_key() has finished accessing k->hash_entry. */
author maintainer
#8 lore raw

PATCH 8/1126 drm/amdgpu: move PX checking into amdgpu_device_ip_early_init

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

commit 901e2be20dc55079997ea1885ea77fc72e6826e7 upstream.

We need to set the APU flag from IP discovery before we evaluate this code.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |   13 +++++++++++++
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c    |   11 -----------
 2 files changed, 13 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +13 -0
@@ -31,6 +31,7 @@
 #include <linux/console.h>
 #include <linux/slab.h>
 #include <linux/iommu.h>
+#include <linux/pci.h>
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_probe_helper.h>
@@ -2073,6 +2074,8 @@ out:
  */
 static int amdgpu_device_ip_early_init(struct amdgpu_device *adev)
 {
+	struct drm_device *dev = adev_to_drm(adev);
+	struct pci_dev *parent;
 	int i, r;
 
 	amdgpu_device_enable_virtual_display(adev);
@@ -2137,6 +2140,16 @@ static int amdgpu_device_ip_early_init(s
 		break;
 	}
 
+	if (amdgpu_has_atpx() &&
+	    (amdgpu_is_atpx_hybrid() ||
+	     amdgpu_has_atpx_dgpu_power_cntl()) &&
+	    ((adev->flags & AMD_IS_APU) == 0) &&
+	    !pci_is_thunderbolt_attached(to_pci_dev(dev->dev)))
+		adev->flags |= AMD_IS_PX;
+
+	parent = pci_upstream_bridge(adev->pdev);
+	adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
+
 	amdgpu_amdkfd_device_probe(adev);
 
 	adev->pm.pp_feature = amdgpu_pp_feature_mask;
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +0 -11
@@ -152,21 +152,10 @@ static void amdgpu_get_audio_func(struct
 int amdgpu_driver_load_kms(struct amdgpu_device *adev, unsigned long flags)
 {
 	struct drm_device *dev;
-	struct pci_dev *parent;
 	int r, acpi_status;
 
 	dev = adev_to_drm(adev);
 
-	if (amdgpu_has_atpx() &&
-	    (amdgpu_is_atpx_hybrid() ||
-	     amdgpu_has_atpx_dgpu_power_cntl()) &&
-	    ((flags & AMD_IS_APU) == 0) &&
-	    !pci_is_thunderbolt_attached(to_pci_dev(dev->dev)))
-		flags |= AMD_IS_PX;
-
-	parent = pci_upstream_bridge(adev->pdev);
-	adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
-
 	/* amdgpu_device_init should report only fatal error
 	 * like memory allocation failure or iomapping failure,
 	 * or memory manager initialization failure, it must
author maintainer
#9 lore raw

PATCH 9/1126 drm/amdgpu: only check for _PR3 on dGPUs

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

commit 85ac2021fe3ace59cc0afd6edf005abad35625b0 upstream.

We don't support runtime pm on APUs. They support more dynamic power savings using clock and powergating.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +4 -2
@@ -2147,8 +2147,10 @@ static int amdgpu_device_ip_early_init(s
 	    !pci_is_thunderbolt_attached(to_pci_dev(dev->dev)))
 		adev->flags |= AMD_IS_PX;
 
-	parent = pci_upstream_bridge(adev->pdev);
-	adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
+	if (!(adev->flags & AMD_IS_APU)) {
+		parent = pci_upstream_bridge(adev->pdev);
+		adev->has_pr3 = parent ? pci_pr3_present(parent) : false;
+	}
 
 	amdgpu_amdkfd_device_probe(adev);
 
author maintainer
#10 lore raw

PATCH 10/1126 iommu/iova: Improve 32-bit free space estimate

In reply to Greg Kroah-Hartman

From: Robin Murphy <[email protected]>

commit 5b61343b50590fb04a3f6be2cdc4868091757262 upstream.

For various reasons based on the allocator behaviour and typical use-cases at the time, when the max32_alloc_size optimisation was introduced it seemed reasonable to couple the reset of the tracked size to the update of cached32_node upon freeing a relevant IOVA. However, since subsequent optimisations focused on helping genuine 32-bit devices make best use of even more limited address spaces, it is now a lot more likely for cached32_node to be anywhere in a "full" 32-bit address space, and as such more likely for space to become available from IOVAs below that node being freed.

At this point, the short-cut in __cached_rbnode_delete_update() really doesn't hold up any more, and we need to fix the logic to reliably provide the expected behaviour. We still want cached32_node to only move upwards, but we should reset the allocation size if *any* 32-bit space has become available.

---
 drivers/iommu/iova.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/iommu/iova.c +3 -2
@@ -95,10 +95,11 @@ __cached_rbnode_delete_update(struct iov
 	cached_iova = to_iova(iovad->cached32_node);
 	if (free == cached_iova ||
 	    (free->pfn_hi < iovad->dma_32bit_pfn &&
-	     free->pfn_lo >= cached_iova->pfn_lo)) {
+	     free->pfn_lo >= cached_iova->pfn_lo))
 		iovad->cached32_node = rb_next(&free->node);
+
+	if (free->pfn_lo < iovad->dma_32bit_pfn)
 		iovad->max32_alloc_size = iovad->dma_32bit_pfn;
-	}
 
 	cached_iova = to_iova(iovad->cached_node);
 	if (free->pfn_lo >= cached_iova->pfn_lo)
author maintainer
#11 lore raw

PATCH 11/1126 block: flush plug based on hardware and software queue order

In reply to Greg Kroah-Hartman

From: Jens Axboe <[email protected]>

commit 26fed4ac4eab09c27fbae1859696cc38f0536407 upstream.

We used to sort the plug list if we had multiple queues before dispatching requests to the IO scheduler. This usually isn't needed, but for certain workloads that interleave requests to disks, it's a less efficient to process the plug list one-by-one if everything is interleaved.

Don't sort the list, but skip through it and flush out entries that have the same target at the same time.

Fixes df87eb0fce8f ("block: get rid of plug list sorting")
Reported-and-tested-by Song Liu <[email protected]>
---
 block/blk-mq.c |   59 +++++++++++++++++++++++++++------------------------------
 1 file changed, 28 insertions(+), 31 deletions(-)
block/blk-mq.c +28 -31
@@ -2561,13 +2561,36 @@ static void __blk_mq_flush_plug_list(str
 	q->mq_ops->queue_rqs(&plug->mq_list);
 }
 
+static void blk_mq_dispatch_plug_list(struct blk_plug *plug, bool from_sched)
+{
+	struct blk_mq_hw_ctx *this_hctx = NULL;
+	struct blk_mq_ctx *this_ctx = NULL;
+	struct request *requeue_list = NULL;
+	unsigned int depth = 0;
+	LIST_HEAD(list);
+
+	do {
+		struct request *rq = rq_list_pop(&plug->mq_list);
+
+		if (!this_hctx) {
+			this_hctx = rq->mq_hctx;
+			this_ctx = rq->mq_ctx;
+		} else if (this_hctx != rq->mq_hctx || this_ctx != rq->mq_ctx) {
+			rq_list_add(&requeue_list, rq);
+			continue;
+		}
+		list_add_tail(&rq->queuelist, &list);
+		depth++;
+	} while (!rq_list_empty(plug->mq_list));
+
+	plug->mq_list = requeue_list;
+	trace_block_unplug(this_hctx->queue, depth, !from_sched);
+	blk_mq_sched_insert_requests(this_hctx, this_ctx, &list, from_sched);
+}
+
 void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule)
 {
-	struct blk_mq_hw_ctx *this_hctx;
-	struct blk_mq_ctx *this_ctx;
 	struct request *rq;
-	unsigned int depth;
-	LIST_HEAD(list);
 
 	if (rq_list_empty(plug->mq_list))
 		return;
@@ -2603,35 +2626,9 @@ void blk_mq_flush_plug_list(struct blk_p
 			return;
 	}
 
-	this_hctx = NULL;
-	this_ctx = NULL;
-	depth = 0;
 	do {
-		rq = rq_list_pop(&plug->mq_list);
-
-		if (!this_hctx) {
-			this_hctx = rq->mq_hctx;
-			this_ctx = rq->mq_ctx;
-		} else if (this_hctx != rq->mq_hctx || this_ctx != rq->mq_ctx) {
-			trace_block_unplug(this_hctx->queue, depth,
-						!from_schedule);
-			blk_mq_sched_insert_requests(this_hctx, this_ctx,
-						&list, from_schedule);
-			depth = 0;
-			this_hctx = rq->mq_hctx;
-			this_ctx = rq->mq_ctx;
-
-		}
-
-		list_add(&rq->queuelist, &list);
-		depth++;
+		blk_mq_dispatch_plug_list(plug, from_schedule);
 	} while (!rq_list_empty(plug->mq_list));
-
-	if (!list_empty(&list)) {
-		trace_block_unplug(this_hctx->queue, depth, !from_schedule);
-		blk_mq_sched_insert_requests(this_hctx, this_ctx, &list,
-						from_schedule);
-	}
 }
 
 void blk_mq_try_issue_list_directly(struct blk_mq_hw_ctx *hctx,
author maintainer
#12 lore raw

PATCH 12/1126 block: ensure plug merging checks the correct queue at least once

In reply to Greg Kroah-Hartman

From: Jens Axboe <[email protected]>

commit 5b2050718d095cd3242d1f42aaaea3a2fec8e6f0 upstream.

Song reports that a RAID rebuild workload runs much slower recently, and it is seeing a lot less merging than it did previously. The reason is that a previous commit reduced the amount of work we do for plug merging. RAID rebuild interleaves requests between disks, so a last-entry check in plug merging always misses a merge opportunity since we always find a different disk than what we are looking for.

Modify the logic such that it's still a one-hit cache, but ensure that we check enough to find the right target before giving up.

Fixes d38a9c04c0d5 ("block: only check previous entry for plug merge attempt")
Reported-and-tested-by Song Liu <[email protected]>
---
 block/blk-merge.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
block/blk-merge.c +14 -6
@@ -1089,12 +1089,20 @@ bool blk_attempt_plug_merge(struct reque
 	if (!plug || rq_list_empty(plug->mq_list))
 		return false;
 
-	/* check the previously added entry for a quick merge attempt */
-	rq = rq_list_peek(&plug->mq_list);
-	if (rq->q == q) {
-		if (blk_attempt_bio_merge(q, rq, bio, nr_segs, false) ==
-				BIO_MERGE_OK)
-			return true;
+	rq_list_for_each(&plug->mq_list, rq) {
+		if (rq->q == q) {
+			if (blk_attempt_bio_merge(q, rq, bio, nr_segs, false) ==
+			    BIO_MERGE_OK)
+				return true;
+			break;
+		}
+
+		/*
+		 * Only keep iterating plug list for merges if we have multiple
+		 * queues
+		 */
+		if (!plug->multiple_queues)
+			break;
 	}
 	return false;
 }
author maintainer
#13 lore raw

PATCH 13/1126 usb: typec: tipd: Forward plug orientation to typec subsystem

In reply to Greg Kroah-Hartman

From: Sven Peter <[email protected]>

commit 676748389f5db74e7d28f9d630eebd75cb8a11b4 upstream.

In order to bring up the USB3 PHY on the Apple M1 we need to know the orientation of the Type-C cable. Extract it from the status register and forward it to the typec subsystem.

---
 drivers/usb/typec/tipd/core.c     |    5 +++++
 drivers/usb/typec/tipd/tps6598x.h |    1 +
 2 files changed, 6 insertions(+)
drivers/usb/typec/tipd/core.c +5 -0
@@ -256,6 +256,10 @@ static int tps6598x_connect(struct tps65
 	typec_set_pwr_opmode(tps->port, mode);
 	typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status));
 	typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status));
+	if (TPS_STATUS_TO_UPSIDE_DOWN(status))
+		typec_set_orientation(tps->port, TYPEC_ORIENTATION_REVERSE);
+	else
+		typec_set_orientation(tps->port, TYPEC_ORIENTATION_NORMAL);
 	tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), true);
 
 	tps->partner = typec_register_partner(tps->port, &desc);
@@ -278,6 +282,7 @@ static void tps6598x_disconnect(struct t
 	typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB);
 	typec_set_pwr_role(tps->port, TPS_STATUS_TO_TYPEC_PORTROLE(status));
 	typec_set_vconn_role(tps->port, TPS_STATUS_TO_TYPEC_VCONN(status));
+	typec_set_orientation(tps->port, TYPEC_ORIENTATION_NONE);
 	tps6598x_set_data_role(tps, TPS_STATUS_TO_TYPEC_DATAROLE(status), false);
 
 	power_supply_changed(tps->psy);
drivers/usb/typec/tipd/tps6598x.h +1 -0
@@ -17,6 +17,7 @@
 /* TPS_REG_STATUS bits */
 #define TPS_STATUS_PLUG_PRESENT		BIT(0)
 #define TPS_STATUS_PLUG_UPSIDE_DOWN	BIT(4)
+#define TPS_STATUS_TO_UPSIDE_DOWN(s)	(!!((s) & TPS_STATUS_PLUG_UPSIDE_DOWN))
 #define TPS_STATUS_PORTROLE		BIT(5)
 #define TPS_STATUS_TO_TYPEC_PORTROLE(s) (!!((s) & TPS_STATUS_PORTROLE))
 #define TPS_STATUS_DATAROLE		BIT(6)
author maintainer
#14 lore raw

PATCH 14/1126 USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 1892bf90677abcad7f06e897e308f5c3e3618dd4 upstream.

The kernel test robot found a problem with the ene_ub6250 subdriver in
usb-storage: It uses structures containing bitfields to represent hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This is not safe; it presumes a particular bit ordering and it assumes the compiler will not insert padding, neither of which is guaranteed.

This patch fixes the problem by changing the structures to simple u8 values, with the bitfields replaced by bitmask constants.

---
 drivers/usb/storage/ene_ub6250.c |  153 +++++++++++++++++++--------------------
 1 file changed, 75 insertions(+), 78 deletions(-)
drivers/usb/storage/ene_ub6250.c +75 -78
@@ -237,36 +237,33 @@ static struct us_unusual_dev ene_ub6250_
 #define memstick_logaddr(logadr1, logadr0) ((((u16)(logadr1)) << 8) | (logadr0))
 
 
-struct SD_STATUS {
-	u8    Insert:1;
-	u8    Ready:1;
-	u8    MediaChange:1;
-	u8    IsMMC:1;
-	u8    HiCapacity:1;
-	u8    HiSpeed:1;
-	u8    WtP:1;
-	u8    Reserved:1;
-};
-
-struct MS_STATUS {
-	u8    Insert:1;
-	u8    Ready:1;
-	u8    MediaChange:1;
-	u8    IsMSPro:1;
-	u8    IsMSPHG:1;
-	u8    Reserved1:1;
-	u8    WtP:1;
-	u8    Reserved2:1;
-};
-
-struct SM_STATUS {
-	u8    Insert:1;
-	u8    Ready:1;
-	u8    MediaChange:1;
-	u8    Reserved:3;
-	u8    WtP:1;
-	u8    IsMS:1;
-};
+/* SD_STATUS bits */
+#define SD_Insert	BIT(0)
+#define SD_Ready	BIT(1)
+#define SD_MediaChange	BIT(2)
+#define SD_IsMMC	BIT(3)
+#define SD_HiCapacity	BIT(4)
+#define SD_HiSpeed	BIT(5)
+#define SD_WtP		BIT(6)
+			/* Bit 7 reserved */
+
+/* MS_STATUS bits */
+#define MS_Insert	BIT(0)
+#define MS_Ready	BIT(1)
+#define MS_MediaChange	BIT(2)
+#define MS_IsMSPro	BIT(3)
+#define MS_IsMSPHG	BIT(4)
+			/* Bit 5 reserved */
+#define MS_WtP		BIT(6)
+			/* Bit 7 reserved */
+
+/* SM_STATUS bits */
+#define SM_Insert	BIT(0)
+#define SM_Ready	BIT(1)
+#define SM_MediaChange	BIT(2)
+			/* Bits 3-5 reserved */
+#define SM_WtP		BIT(6)
+#define SM_IsMS		BIT(7)
 
 struct ms_bootblock_cis {
 	u8 bCistplDEVICE[6];    /* 0 */
@@ -437,9 +434,9 @@ struct ene_ub6250_info {
 	u8		*bbuf;
 
 	/* for 6250 code */
-	struct SD_STATUS	SD_Status;
-	struct MS_STATUS	MS_Status;
-	struct SM_STATUS	SM_Status;
+	u8		SD_Status;
+	u8		MS_Status;
+	u8		SM_Status;
 
 	/* ----- SD Control Data ---------------- */
 	/*SD_REGISTER SD_Regs; */
@@ -602,7 +599,7 @@ static int sd_scsi_test_unit_ready(struc
 {
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
 
-	if (info->SD_Status.Insert && info->SD_Status.Ready)
+	if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready))
 		return USB_STOR_TRANSPORT_GOOD;
 	else {
 		ene_sd_init(us);
@@ -622,7 +619,7 @@ static int sd_scsi_mode_sense(struct us_
 		0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
 		0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
 
-	if (info->SD_Status.WtP)
+	if (info->SD_Status & SD_WtP)
 		usb_stor_set_xfer_buf(mediaWP, 12, srb);
 	else
 		usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
@@ -641,9 +638,9 @@ static int sd_scsi_read_capacity(struct
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
 
 	usb_stor_dbg(us, "sd_scsi_read_capacity\n");
-	if (info->SD_Status.HiCapacity) {
+	if (info->SD_Status & SD_HiCapacity) {
 		bl_len = 0x200;
-		if (info->SD_Status.IsMMC)
+		if (info->SD_Status & SD_IsMMC)
 			bl_num = info->HC_C_SIZE-1;
 		else
 			bl_num = (info->HC_C_SIZE + 1) * 1024 - 1;
@@ -693,7 +690,7 @@ static int sd_scsi_read(struct us_data *
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	if (info->SD_Status.HiCapacity)
+	if (info->SD_Status & SD_HiCapacity)
 		bnByte = bn;
 
 	/* set up the command wrapper */
@@ -733,7 +730,7 @@ static int sd_scsi_write(struct us_data
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	if (info->SD_Status.HiCapacity)
+	if (info->SD_Status & SD_HiCapacity)
 		bnByte = bn;
 
 	/* set up the command wrapper */
@@ -1456,7 +1453,7 @@ static int ms_scsi_test_unit_ready(struc
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
 
 	/* pr_info("MS_SCSI_Test_Unit_Ready\n"); */
-	if (info->MS_Status.Insert && info->MS_Status.Ready) {
+	if ((info->MS_Status & MS_Insert) && (info->MS_Status & MS_Ready)) {
 		return USB_STOR_TRANSPORT_GOOD;
 	} else {
 		ene_ms_init(us);
@@ -1476,7 +1473,7 @@ static int ms_scsi_mode_sense(struct us_
 		0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
 		0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
 
-	if (info->MS_Status.WtP)
+	if (info->MS_Status & MS_WtP)
 		usb_stor_set_xfer_buf(mediaWP, 12, srb);
 	else
 		usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
@@ -1495,7 +1492,7 @@ static int ms_scsi_read_capacity(struct
 
 	usb_stor_dbg(us, "ms_scsi_read_capacity\n");
 	bl_len = 0x200;
-	if (info->MS_Status.IsMSPro)
+	if (info->MS_Status & MS_IsMSPro)
 		bl_num = info->MSP_TotalBlock - 1;
 	else
 		bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1;
@@ -1650,7 +1647,7 @@ static int ms_scsi_read(struct us_data *
 	if (bn > info->bl_num)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	if (info->MS_Status.IsMSPro) {
+	if (info->MS_Status & MS_IsMSPro) {
 		result = ene_load_bincode(us, MSP_RW_PATTERN);
 		if (result != USB_STOR_XFER_GOOD) {
 			usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n");
@@ -1751,7 +1748,7 @@ static int ms_scsi_write(struct us_data
 	if (bn > info->bl_num)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	if (info->MS_Status.IsMSPro) {
+	if (info->MS_Status & MS_IsMSPro) {
 		result = ene_load_bincode(us, MSP_RW_PATTERN);
 		if (result != USB_STOR_XFER_GOOD) {
 			pr_info("Load MSP RW pattern Fail !!\n");
@@ -1859,12 +1856,12 @@ static int ene_get_card_status(struct us
 
 	tmpreg = (u16) reg4b;
 	reg4b = *(u32 *)(&buf[0x14]);
-	if (info->SD_Status.HiCapacity && !info->SD_Status.IsMMC)
+	if ((info->SD_Status & SD_HiCapacity) && !(info->SD_Status & SD_IsMMC))
 		info->HC_C_SIZE = (reg4b >> 8) & 0x3fffff;
 
 	info->SD_C_SIZE = ((tmpreg & 0x03) << 10) | (u16)(reg4b >> 22);
 	info->SD_C_SIZE_MULT = (u8)(reg4b >> 7)  & 0x07;
-	if (info->SD_Status.HiCapacity && info->SD_Status.IsMMC)
+	if ((info->SD_Status & SD_HiCapacity) && (info->SD_Status & SD_IsMMC))
 		info->HC_C_SIZE = *(u32 *)(&buf[0x100]);
 
 	if (info->SD_READ_BL_LEN > SD_BLOCK_LEN) {
@@ -2076,6 +2073,7 @@ static int ene_ms_init(struct us_data *u
 	u16 MSP_BlockSize, MSP_UserAreaBlocks;
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
 	u8 *bbuf = info->bbuf;
+	unsigned int s;
 
 	printk(KERN_INFO "transport --- ENE_MSInit\n");
 
@@ -2100,15 +2098,16 @@ static int ene_ms_init(struct us_data *u
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 	/* the same part to test ENE */
-	info->MS_Status = *(struct MS_STATUS *) bbuf;
+	info->MS_Status = bbuf[0];
 
-	if (info->MS_Status.Insert && info->MS_Status.Ready) {
-		printk(KERN_INFO "Insert     = %x\n", info->MS_Status.Insert);
-		printk(KERN_INFO "Ready      = %x\n", info->MS_Status.Ready);
-		printk(KERN_INFO "IsMSPro    = %x\n", info->MS_Status.IsMSPro);
-		printk(KERN_INFO "IsMSPHG    = %x\n", info->MS_Status.IsMSPHG);
-		printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
-		if (info->MS_Status.IsMSPro) {
+	s = info->MS_Status;
+	if ((s & MS_Insert) && (s & MS_Ready)) {
+		printk(KERN_INFO "Insert     = %x\n", !!(s & MS_Insert));
+		printk(KERN_INFO "Ready      = %x\n", !!(s & MS_Ready));
+		printk(KERN_INFO "IsMSPro    = %x\n", !!(s & MS_IsMSPro));
+		printk(KERN_INFO "IsMSPHG    = %x\n", !!(s & MS_IsMSPHG));
+		printk(KERN_INFO "WtP= %x\n", !!(s & MS_WtP));
+		if (s & MS_IsMSPro) {
 			MSP_BlockSize      = (bbuf[6] << 8) | bbuf[7];
 			MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
 			info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
@@ -2169,17 +2168,17 @@ static int ene_sd_init(struct us_data *u
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	info->SD_Status =  *(struct SD_STATUS *) bbuf;
-	if (info->SD_Status.Insert && info->SD_Status.Ready) {
-		struct SD_STATUS *s = &info->SD_Status;
+	info->SD_Status = bbuf[0];
+	if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready)) {
+		unsigned int s = info->SD_Status;
 
 		ene_get_card_status(us, bbuf);
-		usb_stor_dbg(us, "Insert     = %x\n", s->Insert);
-		usb_stor_dbg(us, "Ready      = %x\n", s->Ready);
-		usb_stor_dbg(us, "IsMMC      = %x\n", s->IsMMC);
-		usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity);
-		usb_stor_dbg(us, "HiSpeed    = %x\n", s->HiSpeed);
-		usb_stor_dbg(us, "WtP        = %x\n", s->WtP);
+		usb_stor_dbg(us, "Insert     = %x\n", !!(s & SD_Insert));
+		usb_stor_dbg(us, "Ready      = %x\n", !!(s & SD_Ready));
+		usb_stor_dbg(us, "IsMMC      = %x\n", !!(s & SD_IsMMC));
+		usb_stor_dbg(us, "HiCapacity = %x\n", !!(s & SD_HiCapacity));
+		usb_stor_dbg(us, "HiSpeed    = %x\n", !!(s & SD_HiSpeed));
+		usb_stor_dbg(us, "WtP        = %x\n", !!(s & SD_WtP));
 	} else {
 		usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
 		return USB_STOR_TRANSPORT_ERROR;
@@ -2201,14 +2200,14 @@ static int ene_init(struct us_data *us)
 
 	misc_reg03 = bbuf[0];
 	if (misc_reg03 & 0x01) {
-		if (!info->SD_Status.Ready) {
+		if (!(info->SD_Status & SD_Ready)) {
 			result = ene_sd_init(us);
 			if (result != USB_STOR_XFER_GOOD)
 				return USB_STOR_TRANSPORT_ERROR;
 		}
 	}
 	if (misc_reg03 & 0x02) {
-		if (!info->MS_Status.Ready) {
+		if (!(info->MS_Status & MS_Ready)) {
 			result = ene_ms_init(us);
 			if (result != USB_STOR_XFER_GOOD)
 				return USB_STOR_TRANSPORT_ERROR;
@@ -2307,14 +2306,14 @@ static int ene_transport(struct scsi_cmn
 
 	/*US_DEBUG(usb_stor_show_command(us, srb)); */
 	scsi_set_resid(srb, 0);
-	if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready)))
+	if (unlikely(!(info->SD_Status & SD_Ready) || (info->MS_Status & MS_Ready)))
 		result = ene_init(us);
 	if (result == USB_STOR_XFER_GOOD) {
 		result = USB_STOR_TRANSPORT_ERROR;
-		if (info->SD_Status.Ready)
+		if (info->SD_Status & SD_Ready)
 			result = sd_scsi_irp(us, srb);
 
-		if (info->MS_Status.Ready)
+		if (info->MS_Status & MS_Ready)
 			result = ms_scsi_irp(us, srb);
 	}
 	return result;
@@ -2378,7 +2377,6 @@ static int ene_ub6250_probe(struct usb_i
 
 static int ene_ub6250_resume(struct usb_interface *iface)
 {
-	u8 tmp = 0;
 	struct us_data *us = usb_get_intfdata(iface);
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
 
@@ -2390,17 +2388,16 @@ static int ene_ub6250_resume(struct usb_
 	mutex_unlock(&us->dev_mutex);
 
 	info->Power_IsResum = true;
-	/*info->SD_Status.Ready = 0; */
-	info->SD_Status = *(struct SD_STATUS *)&tmp;
-	info->MS_Status = *(struct MS_STATUS *)&tmp;
-	info->SM_Status = *(struct SM_STATUS *)&tmp;
+	/* info->SD_Status &= ~SD_Ready; */
+	info->SD_Status = 0;
+	info->MS_Status = 0;
+	info->SM_Status = 0;
 
 	return 0;
 }
 
 static int ene_ub6250_reset_resume(struct usb_interface *iface)
 {
-	u8 tmp = 0;
 	struct us_data *us = usb_get_intfdata(iface);
 	struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
 
@@ -2412,10 +2409,10 @@ static int ene_ub6250_reset_resume(struc
 	 * the device
 	 */
 	info->Power_IsResum = true;
-	/*info->SD_Status.Ready = 0; */
-	info->SD_Status = *(struct SD_STATUS *)&tmp;
-	info->MS_Status = *(struct MS_STATUS *)&tmp;
-	info->SM_Status = *(struct SM_STATUS *)&tmp;
+	/* info->SD_Status &= ~SD_Ready; */
+	info->SD_Status = 0;
+	info->MS_Status = 0;
+	info->SM_Status = 0;
 
 	return 0;
 }
author maintainer
#15 lore raw

PATCH 15/1126 xhci: fix garbage USBSTS being logged in some cases

In reply to Greg Kroah-Hartman

From: Anssi Hannula <[email protected]>

commit 3105bc977d7cbf2edc35e24cc7e009686f6e4a56 upstream.

xhci_decode_usbsts() is expected to return a zero-terminated string by its only caller, xhci_stop_endpoint_command_watchdog(), which directly logs the return value:

  xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));

However, if no recognized bits are set in usbsts, the function will return without having called any sprintf() and therefore return an untouched non-zero-terminated caller-provided buffer, causing garbage to be output to log.

Fix that by always including the raw value in the output.

Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing") the result effect in the failure case was different as a static buffer was used here, but the code still worked incorrectly.

Fixes 9c1aa36efdae ("xhci: Show host status when watchdog triggers and host is assumed dead.")
---
 drivers/usb/host/xhci.h |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/usb/host/xhci.h +4 -1
@@ -2624,8 +2624,11 @@ static inline const char *xhci_decode_us
 {
 	int ret = 0;
 
+	ret = sprintf(str, " 0x%08x", usbsts);
+
 	if (usbsts == ~(u32)0)
-		return " 0xffffffff";
+		return str;
+
 	if (usbsts & STS_HALT)
 		ret += sprintf(str + ret, " HCHalted");
 	if (usbsts & STS_FATAL)
author maintainer
#16 lore raw

PATCH 16/1126 xhci: fix runtime PM imbalance in USB2 resume

In reply to Greg Kroah-Hartman

From: Henry Lin <[email protected]>

commit 70c05e4cf63054cd755ca66c1819327b22cb085f upstream.

A race between system resume and device-initiated resume may result in runtime PM imbalance on USB2 root hub. If a device-initiated resume starts and system resume xhci_bus_resume() directs U0 before hub driver sees the resuming device in RESUME state, device-initiated resume will not be finished in xhci_handle_usb2_port_link_resume(). In this case, usb_hcd_end_port_resume() call is missing.

This changes calls usb_hcd_end_port_resume() if resuming device reaches U0 to keep runtime PM balance.

Fixes a231ec41e6f6 ("xhci: refactor U0 link state handling in get_port_status")
---
 drivers/usb/host/xhci-hub.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/host/xhci-hub.c +3 -0
@@ -1088,6 +1088,9 @@ static void xhci_get_usb2_port_status(st
 		if (link_state == XDEV_U2)
 			*status |= USB_PORT_STAT_L1;
 		if (link_state == XDEV_U0) {
+			if (bus_state->resume_done[portnum])
+				usb_hcd_end_port_resume(&port->rhub->hcd->self,
+							portnum);
 			bus_state->resume_done[portnum] = 0;
 			clear_bit(portnum, &bus_state->resuming_ports);
 			if (bus_state->suspended_ports & (1 << portnum)) {
author maintainer
#17 lore raw

PATCH 17/1126 xhci: make xhci_handshake timeout for xhci_reset() adjustable

In reply to Greg Kroah-Hartman

From: Mathias Nyman <[email protected]>

commit 14073ce951b5919da450022c050772902f24f054 upstream.

xhci_reset() timeout was increased from 250ms to 10 seconds in order to give Renesas 720201 xHC enough time to get ready in probe.

xhci_reset() is called with interrupts disabled in other places, and waiting for 10 seconds there is not acceptable.

Add a timeout parameter to xhci_reset(), and adjust it back to 250ms when called from xhci_stop() or xhci_shutdown() where interrupts are disabled, and successful reset isn't that critical.
This solves issues when deactivating host mode on platforms like SM8450.

For now don't change the timeout if xHC is reset in xhci_resume(). No issues are reported for it, and we need the reset to succeed. Locking around that reset needs to be revisited later.

Additionally change the signed integer timeout parameter in xhci_handshake() to a u64 to match the timeout value we pass to readl_poll_timeout_atomic()

---
 drivers/usb/host/xhci-hub.c |    2 +-
 drivers/usb/host/xhci-mem.c |    2 +-
 drivers/usb/host/xhci.c     |   20 +++++++++-----------
 drivers/usb/host/xhci.h     |    7 +++++--
 4 files changed, 16 insertions(+), 15 deletions(-)
drivers/usb/host/xhci-hub.c +1 -1
@@ -762,7 +762,7 @@ static int xhci_exit_test_mode(struct xh
 	}
 	pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
 	xhci->test_mode = 0;
-	return xhci_reset(xhci);
+	return xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
 }
 
 void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
drivers/usb/host/xhci-mem.c +1 -1
@@ -2583,7 +2583,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
 
 fail:
 	xhci_halt(xhci);
-	xhci_reset(xhci);
+	xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
 	xhci_mem_cleanup(xhci);
 	return -ENOMEM;
 }
drivers/usb/host/xhci.c +9 -11
@@ -65,7 +65,7 @@ static bool td_on_ring(struct xhci_td *t
  * handshake done).  There are two failure modes:  "usec" have passed (major
  * hardware flakeout), or the register reads as all-ones (hardware removed).
  */
-int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us)
 {
 	u32	result;
 	int	ret;
@@ -73,7 +73,7 @@ int xhci_handshake(void __iomem *ptr, u3
 	ret = readl_poll_timeout_atomic(ptr, result,
 					(result & mask) == done ||
 					result == U32_MAX,
-					1, usec);
+					1, timeout_us);
 	if (result == U32_MAX)		/* card removed */
 		return -ENODEV;
 
@@ -162,7 +162,7 @@ int xhci_start(struct xhci_hcd *xhci)
  * Transactions will be terminated immediately, and operational registers
  * will be set to their defaults.
  */
-int xhci_reset(struct xhci_hcd *xhci)
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us)
 {
 	u32 command;
 	u32 state;
@@ -195,8 +195,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	if (xhci->quirks & XHCI_INTEL_HOST)
 		udelay(1000);
 
-	ret = xhci_handshake(&xhci->op_regs->command,
-			CMD_RESET, 0, 10 * 1000 * 1000);
+	ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us);
 	if (ret)
 		return ret;
 
@@ -209,8 +208,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * xHCI cannot write to any doorbells or operational registers other
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
-	ret = xhci_handshake(&xhci->op_regs->status,
-			STS_CNR, 0, 10 * 1000 * 1000);
+	ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, timeout_us);
 
 	xhci->usb2_rhub.bus_state.port_c_suspend = 0;
 	xhci->usb2_rhub.bus_state.suspended_ports = 0;
@@ -731,7 +729,7 @@ static void xhci_stop(struct usb_hcd *hc
 	xhci->xhc_state |= XHCI_STATE_HALTED;
 	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
 	xhci_halt(xhci);
-	xhci_reset(xhci);
+	xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
 	spin_unlock_irq(&xhci->lock);
 
 	xhci_cleanup_msix(xhci);
@@ -784,7 +782,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
 	xhci_halt(xhci);
 	/* Workaround for spurious wakeups at shutdown with HSW */
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
-		xhci_reset(xhci);
+		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
 	spin_unlock_irq(&xhci->lock);
 
 	xhci_cleanup_msix(xhci);
@@ -1170,7 +1168,7 @@ int xhci_resume(struct xhci_hcd *xhci, b
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
 		xhci_zero_64b_regs(xhci);
-		retval = xhci_reset(xhci);
+		retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
 		spin_unlock_irq(&xhci->lock);
 		if (retval)
 			return retval;
@@ -5316,7 +5314,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 
 	xhci_dbg(xhci, "Resetting HCD\n");
 	/* Reset the internal HC memory state and registers. */
-	retval = xhci_reset(xhci);
+	retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
 	if (retval)
 		return retval;
 	xhci_dbg(xhci, "Reset complete\n");
drivers/usb/host/xhci.h +5 -2
@@ -229,6 +229,9 @@ struct xhci_op_regs {
 #define CMD_ETE		(1 << 14)
 /* bits 15:31 are reserved (and should be preserved on writes). */
 
+#define XHCI_RESET_LONG_USEC		(10 * 1000 * 1000)
+#define XHCI_RESET_SHORT_USEC		(250 * 1000)
+
 /* IMAN - Interrupt Management Register */
 #define IMAN_IE		(1 << 1)
 #define IMAN_IP		(1 << 0)
@@ -2083,11 +2086,11 @@ void xhci_free_container_ctx(struct xhci
 
 /* xHCI host controller glue */
 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
-int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us);
 void xhci_quiesce(struct xhci_hcd *xhci);
 int xhci_halt(struct xhci_hcd *xhci);
 int xhci_start(struct xhci_hcd *xhci);
-int xhci_reset(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us);
 int xhci_run(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
 void xhci_shutdown(struct usb_hcd *hcd);
author maintainer
#18 lore raw

PATCH 18/1126 xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()

In reply to Greg Kroah-Hartman

From: Anssi Hannula <[email protected]>

commit 05519b8589a679edb8fa781259893d20bece04ad upstream.

xhci_decode_ctrl_ctx() returns the untouched buffer as-is if both "drop" and "add" parameters are zero.

Fix the function to return an empty string in that case.

It was not immediately clear from the possible call chains whether this issue is currently actually triggerable or not.

Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing") the result effect in the failure case was different as a static buffer was used here, but the code still worked incorrectly.

Fixes 90d6d5731da7 ("xhci: Add tracing for input control context")

commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing")

---
 drivers/usb/host/xhci.h |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/host/xhci.h +2 -0
@@ -2470,6 +2470,8 @@ static inline const char *xhci_decode_ct
 	unsigned int	bit;
 	int		ret = 0;
 
+	str[0] = '\0';
+
 	if (drop) {
 		ret = sprintf(str, "Drop:");
 		for_each_set_bit(bit, &drop, 32)
author maintainer
#19 lore raw

PATCH 19/1126 mei: me: disable driver on the ign firmware

In reply to Greg Kroah-Hartman

From: Alexander Usyskin <[email protected]>

commit ccdf6f806fbf559f7c29ed9302a7c1b4da7fd37f upstream.

Add a quirk to disable MEI interface on Intel PCH Ignition (IGN) as the IGN firmware doesn't support the protocol.

---
 drivers/misc/mei/hw-me-regs.h |    1 +
 drivers/misc/mei/hw-me.c      |   23 ++++++++++++-----------
 2 files changed, 13 insertions(+), 11 deletions(-)
drivers/misc/mei/hw-me-regs.h +1 -0
@@ -120,6 +120,7 @@
 #define PCI_CFG_HFS_2         0x48
 #define PCI_CFG_HFS_3         0x60
 #  define PCI_CFG_HFS_3_FW_SKU_MSK   0x00000070
+#  define PCI_CFG_HFS_3_FW_SKU_IGN   0x00000000
 #  define PCI_CFG_HFS_3_FW_SKU_SPS   0x00000060
 #define PCI_CFG_HFS_4         0x64
 #define PCI_CFG_HFS_5         0x68
drivers/misc/mei/hw-me.c +12 -11
@@ -1405,16 +1405,16 @@ static bool mei_me_fw_type_sps_4(const s
 	.quirk_probe = mei_me_fw_type_sps_4
 
 /**
- * mei_me_fw_type_sps() - check for sps sku
+ * mei_me_fw_type_sps_ign() - check for sps or ign sku
  *
- * Read ME FW Status register to check for SPS Firmware.
- * The SPS FW is only signaled in pci function 0
+ * Read ME FW Status register to check for SPS or IGN Firmware.
+ * The SPS/IGN FW is only signaled in pci function 0
  *
  * @pdev: pci device
  *
- * Return: true in case of SPS firmware
+ * Return: true in case of SPS/IGN firmware
  */
-static bool mei_me_fw_type_sps(const struct pci_dev *pdev)
+static bool mei_me_fw_type_sps_ign(const struct pci_dev *pdev)
 {
 	u32 reg;
 	u32 fw_type;
@@ -1427,14 +1427,15 @@ static bool mei_me_fw_type_sps(const str
 
 	dev_dbg(&pdev->dev, "fw type is %d\n", fw_type);
 
-	return fw_type == PCI_CFG_HFS_3_FW_SKU_SPS;
+	return fw_type == PCI_CFG_HFS_3_FW_SKU_IGN ||
+	       fw_type == PCI_CFG_HFS_3_FW_SKU_SPS;
 }
 
 #define MEI_CFG_KIND_ITOUCH                     \
 	.kind = "itouch"
 
-#define MEI_CFG_FW_SPS                          \
-	.quirk_probe = mei_me_fw_type_sps
+#define MEI_CFG_FW_SPS_IGN                      \
+	.quirk_probe = mei_me_fw_type_sps_ign
 
 #define MEI_CFG_FW_VER_SUPP                     \
 	.fw_ver_supported = 1
@@ -1535,7 +1536,7 @@ static const struct mei_cfg mei_me_pch12
 	MEI_CFG_PCH8_HFS,
 	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_DMA_128,
-	MEI_CFG_FW_SPS,
+	MEI_CFG_FW_SPS_IGN,
 };
 
 /* Cannon Lake itouch with quirk for SPS 5.0 and newer Firmware exclusion
@@ -1545,7 +1546,7 @@ static const struct mei_cfg mei_me_pch12
 	MEI_CFG_KIND_ITOUCH,
 	MEI_CFG_PCH8_HFS,
 	MEI_CFG_FW_VER_SUPP,
-	MEI_CFG_FW_SPS,
+	MEI_CFG_FW_SPS_IGN,
 };
 
 /* Tiger Lake and newer devices */
@@ -1562,7 +1563,7 @@ static const struct mei_cfg mei_me_pch15
 	MEI_CFG_FW_VER_SUPP,
 	MEI_CFG_DMA_128,
 	MEI_CFG_TRC,
-	MEI_CFG_FW_SPS,
+	MEI_CFG_FW_SPS_IGN,
 };
 
 /*
author maintainer
#20 lore raw

PATCH 20/1126 mei: me: add Alder Lake N device id.

In reply to Greg Kroah-Hartman

From: Alexander Usyskin <[email protected]>

commit 7bbbd0845818cffa9fa8ccfe52fa1cad58e7e4f2 upstream.

Add Alder Lake N device ID.

---
 drivers/misc/mei/hw-me-regs.h |    1 +
 drivers/misc/mei/pci-me.c     |    1 +
 2 files changed, 2 insertions(+)
drivers/misc/mei/hw-me-regs.h +1 -0
@@ -107,6 +107,7 @@
 #define MEI_DEV_ID_ADP_S      0x7AE8  /* Alder Lake Point S */
 #define MEI_DEV_ID_ADP_LP     0x7A60  /* Alder Lake Point LP */
 #define MEI_DEV_ID_ADP_P      0x51E0  /* Alder Lake Point P */
+#define MEI_DEV_ID_ADP_N      0x54E0  /* Alder Lake Point N */
 
 /*
  * MEI HW Section
drivers/misc/mei/pci-me.c +1 -0
@@ -113,6 +113,7 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_S, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_LP, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)},
 
 	/* required last entry */
 	{0, }
author maintainer
#21 lore raw

PATCH 21/1126 mei: avoid iterator usage outside of list_for_each_entry

In reply to Greg Kroah-Hartman

From: Alexander Usyskin <[email protected]>

commit c10187b1c5ebb8681ca467ab7b0ded5ea415d258 upstream.

Usage of the iterator outside of the list_for_each_entry is considered harmful. https://lkml.org/lkml/2022/2/17/1032

Do not reference the loop variable outside of the loop, by rearranging the orders of execution.
Instead of performing search loop and checking outside the loop if the end of the list was hit and no matching element was found, the execution is performed inside the loop upon a successful match followed by a goto statement to the next step,
therefore no condition has to be performed after the loop has ended.

---
 drivers/misc/mei/interrupt.c |   35 +++++++++++++++--------------------
 1 file changed, 15 insertions(+), 20 deletions(-)
drivers/misc/mei/interrupt.c +15 -20
@@ -424,31 +424,26 @@ int mei_irq_read_handler(struct mei_devi
 	list_for_each_entry(cl, &dev->file_list, link) {
 		if (mei_cl_hbm_equal(cl, mei_hdr)) {
 			cl_dbg(dev, cl, "got a message\n");
-			break;
+			ret = mei_cl_irq_read_msg(cl, mei_hdr, meta_hdr, cmpl_list);
+			goto reset_slots;
 		}
 	}
 
 	/* if no recipient cl was found we assume corrupted header */
-	if (&cl->link == &dev->file_list) {
-		/* A message for not connected fixed address clients
-		 * should be silently discarded
-		 * On power down client may be force cleaned,
-		 * silently discard such messages
-		 */
-		if (hdr_is_fixed(mei_hdr) ||
-		    dev->dev_state == MEI_DEV_POWER_DOWN) {
-			mei_irq_discard_msg(dev, mei_hdr, mei_hdr->length);
-			ret = 0;
-			goto reset_slots;
-		}
-		dev_err(dev->dev, "no destination client found 0x%08X\n",
-				dev->rd_msg_hdr[0]);
-		ret = -EBADMSG;
-		goto end;
+	/* A message for not connected fixed address clients
+	 * should be silently discarded
+	 * On power down client may be force cleaned,
+	 * silently discard such messages
+	 */
+	if (hdr_is_fixed(mei_hdr) ||
+	    dev->dev_state == MEI_DEV_POWER_DOWN) {
+		mei_irq_discard_msg(dev, mei_hdr, mei_hdr->length);
+		ret = 0;
+		goto reset_slots;
 	}
-
-	ret = mei_cl_irq_read_msg(cl, mei_hdr, meta_hdr, cmpl_list);
-
+	dev_err(dev->dev, "no destination client found 0x%08X\n", dev->rd_msg_hdr[0]);
+	ret = -EBADMSG;
+	goto end;
 
 reset_slots:
 	/* reset the number of slots and header */
author maintainer
#22 lore raw

PATCH 22/1126 bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series

In reply to Greg Kroah-Hartman

From: Yonglin Tan <[email protected]>

commit 2413ffbf19a95cfcd7adf63135c5a9343a66d0a2 upstream.

For default mechanism, the driver uses default MRU 3500 if mru_default is not initialized. The Qualcomm configured the MRU size to 32768 in the WWAN device FW. So, we align the driver setting with Qualcomm FW setting.

---
 drivers/bus/mhi/pci_generic.c |    1 +
 1 file changed, 1 insertion(+)
drivers/bus/mhi/pci_generic.c +1 -0
@@ -327,6 +327,7 @@ static const struct mhi_pci_dev_info mhi
 	.config = &modem_quectel_em1xx_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
+	.mru_default = 32768,
 	.sideband_wake = true,
 };
 
author maintainer
#23 lore raw

PATCH 23/1126 bus: mhi: Fix pm_state conversion to string

In reply to Greg Kroah-Hartman

From: Paul Davey <[email protected]>

commit 64f93a9a27c1970fa8ee5ffc5a6ae2bda477ec5b upstream.

On big endian architectures the mhi debugfs files which report pm state give "Invalid State" for all states. This is caused by using find_last_bit which takes an unsigned long* while the state is passed in as an enum mhi_pm_state which will be of int size.

Fix by using __fls to pass the value of state instead of find_last_bit.

Also the current API expects "mhi_pm_state" enumerator as the function argument but the function only works with bitmasks. So as Alex suggested, let's change the argument to u32 to avoid confusion.

Fixes a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions")
[mani: changed the function argument to u32]
---
 drivers/bus/mhi/core/init.c     |   10 ++++++----
 drivers/bus/mhi/core/internal.h |    2 +-
 2 files changed, 7 insertions(+), 5 deletions(-)
drivers/bus/mhi/core/init.c +6 -4
@@ -77,12 +77,14 @@ static const char * const mhi_pm_state_s
 	[MHI_PM_STATE_LD_ERR_FATAL_DETECT] = "Linkdown or Error Fatal Detect",
 };
 
-const char *to_mhi_pm_state_str(enum mhi_pm_state state)
+const char *to_mhi_pm_state_str(u32 state)
 {
-	unsigned long pm_state = state;
-	int index = find_last_bit(&pm_state, 32);
+	int index;
 
-	if (index >= ARRAY_SIZE(mhi_pm_state_str))
+	if (state)
+		index = __fls(state);
+
+	if (!state || index >= ARRAY_SIZE(mhi_pm_state_str))
 		return "Invalid State";
 
 	return mhi_pm_state_str[index];
drivers/bus/mhi/core/internal.h +1 -1
@@ -622,7 +622,7 @@ void mhi_free_bhie_table(struct mhi_cont
 enum mhi_pm_state __must_check mhi_tryset_pm_state(
 					struct mhi_controller *mhi_cntrl,
 					enum mhi_pm_state state);
-const char *to_mhi_pm_state_str(enum mhi_pm_state state);
+const char *to_mhi_pm_state_str(u32 state);
 int mhi_queue_state_transition(struct mhi_controller *mhi_cntrl,
 			       enum dev_st_transition state);
 void mhi_pm_st_worker(struct work_struct *work);
author maintainer
#24 lore raw

PATCH 24/1126 bus: mhi: Fix MHI DMA structure endianness

In reply to Greg Kroah-Hartman

From: Paul Davey <[email protected]>

commit ed2d980503235829aa3e0c7ae3b82374c30a081c upstream.

The MHI driver does not work on big endian architectures. The controller never transitions into mission mode. This appears to be due to the modem device expecting the various contexts and transfer rings to have fields in little endian order in memory, but the driver constructs them in native endianness.

Fix MHI event, channel and command contexts and TRE handling macros to use explicit conversion to little endian. Mark fields in relevant structures as little endian to document this requirement.

Fixes a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions")
Fixes 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
---
 drivers/bus/mhi/core/debugfs.c  |   26 ++++----
 drivers/bus/mhi/core/init.c     |   36 ++++++------
 drivers/bus/mhi/core/internal.h |  119 ++++++++++++++++++++--------------------
 drivers/bus/mhi/core/main.c     |   22 +++----
 drivers/bus/mhi/core/pm.c       |    4 -
 5 files changed, 104 insertions(+), 103 deletions(-)
drivers/bus/mhi/core/debugfs.c +13 -13
@@ -60,16 +60,16 @@ static int mhi_debugfs_events_show(struc
 		}
 
 		seq_printf(m, "Index: %d intmod count: %lu time: %lu",
-			   i, (er_ctxt->intmod & EV_CTX_INTMODC_MASK) >>
+			   i, (le32_to_cpu(er_ctxt->intmod) & EV_CTX_INTMODC_MASK) >>
 			   EV_CTX_INTMODC_SHIFT,
-			   (er_ctxt->intmod & EV_CTX_INTMODT_MASK) >>
+			   (le32_to_cpu(er_ctxt->intmod) & EV_CTX_INTMODT_MASK) >>
 			   EV_CTX_INTMODT_SHIFT);
 
-		seq_printf(m, " base: 0x%0llx len: 0x%llx", er_ctxt->rbase,
-			   er_ctxt->rlen);
+		seq_printf(m, " base: 0x%0llx len: 0x%llx", le64_to_cpu(er_ctxt->rbase),
+			   le64_to_cpu(er_ctxt->rlen));
 
-		seq_printf(m, " rp: 0x%llx wp: 0x%llx", er_ctxt->rp,
-			   er_ctxt->wp);
+		seq_printf(m, " rp: 0x%llx wp: 0x%llx", le64_to_cpu(er_ctxt->rp),
+			   le64_to_cpu(er_ctxt->wp));
 
 		seq_printf(m, " local rp: 0x%pK db: 0x%pad\n", ring->rp,
 			   &mhi_event->db_cfg.db_val);
@@ -106,18 +106,18 @@ static int mhi_debugfs_channels_show(str
 
 		seq_printf(m,
 			   "%s(%u) state: 0x%lx brstmode: 0x%lx pollcfg: 0x%lx",
-			   mhi_chan->name, mhi_chan->chan, (chan_ctxt->chcfg &
+			   mhi_chan->name, mhi_chan->chan, (le32_to_cpu(chan_ctxt->chcfg) &
 			   CHAN_CTX_CHSTATE_MASK) >> CHAN_CTX_CHSTATE_SHIFT,
-			   (chan_ctxt->chcfg & CHAN_CTX_BRSTMODE_MASK) >>
-			   CHAN_CTX_BRSTMODE_SHIFT, (chan_ctxt->chcfg &
+			   (le32_to_cpu(chan_ctxt->chcfg) & CHAN_CTX_BRSTMODE_MASK) >>
+			   CHAN_CTX_BRSTMODE_SHIFT, (le32_to_cpu(chan_ctxt->chcfg) &
 			   CHAN_CTX_POLLCFG_MASK) >> CHAN_CTX_POLLCFG_SHIFT);
 
-		seq_printf(m, " type: 0x%x event ring: %u", chan_ctxt->chtype,
-			   chan_ctxt->erindex);
+		seq_printf(m, " type: 0x%x event ring: %u", le32_to_cpu(chan_ctxt->chtype),
+			   le32_to_cpu(chan_ctxt->erindex));
 
 		seq_printf(m, " base: 0x%llx len: 0x%llx rp: 0x%llx wp: 0x%llx",
-			   chan_ctxt->rbase, chan_ctxt->rlen, chan_ctxt->rp,
-			   chan_ctxt->wp);
+			   le64_to_cpu(chan_ctxt->rbase), le64_to_cpu(chan_ctxt->rlen),
+			   le64_to_cpu(chan_ctxt->rp), le64_to_cpu(chan_ctxt->wp));
 
 		seq_printf(m, " local rp: 0x%pK local wp: 0x%pK db: 0x%pad\n",
 			   ring->rp, ring->wp,
drivers/bus/mhi/core/init.c +18 -18
@@ -293,17 +293,17 @@ int mhi_init_dev_ctxt(struct mhi_control
 		if (mhi_chan->offload_ch)
 			continue;
 
-		tmp = chan_ctxt->chcfg;
+		tmp = le32_to_cpu(chan_ctxt->chcfg);
 		tmp &= ~CHAN_CTX_CHSTATE_MASK;
 		tmp |= (MHI_CH_STATE_DISABLED << CHAN_CTX_CHSTATE_SHIFT);
 		tmp &= ~CHAN_CTX_BRSTMODE_MASK;
 		tmp |= (mhi_chan->db_cfg.brstmode << CHAN_CTX_BRSTMODE_SHIFT);
 		tmp &= ~CHAN_CTX_POLLCFG_MASK;
 		tmp |= (mhi_chan->db_cfg.pollcfg << CHAN_CTX_POLLCFG_SHIFT);
-		chan_ctxt->chcfg = tmp;
+		chan_ctxt->chcfg = cpu_to_le32(tmp);
 
-		chan_ctxt->chtype = mhi_chan->type;
-		chan_ctxt->erindex = mhi_chan->er_index;
+		chan_ctxt->chtype = cpu_to_le32(mhi_chan->type);
+		chan_ctxt->erindex = cpu_to_le32(mhi_chan->er_index);
 
 		mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
 		mhi_chan->tre_ring.db_addr = (void __iomem *)&chan_ctxt->wp;
@@ -328,14 +328,14 @@ int mhi_init_dev_ctxt(struct mhi_control
 		if (mhi_event->offload_ev)
 			continue;
 
-		tmp = er_ctxt->intmod;
+		tmp = le32_to_cpu(er_ctxt->intmod);
 		tmp &= ~EV_CTX_INTMODC_MASK;
 		tmp &= ~EV_CTX_INTMODT_MASK;
 		tmp |= (mhi_event->intmod << EV_CTX_INTMODT_SHIFT);
-		er_ctxt->intmod = tmp;
+		er_ctxt->intmod = cpu_to_le32(tmp);
 
-		er_ctxt->ertype = MHI_ER_TYPE_VALID;
-		er_ctxt->msivec = mhi_event->irq;
+		er_ctxt->ertype = cpu_to_le32(MHI_ER_TYPE_VALID);
+		er_ctxt->msivec = cpu_to_le32(mhi_event->irq);
 		mhi_event->db_cfg.db_mode = true;
 
 		ring->el_size = sizeof(struct mhi_tre);
@@ -349,9 +349,9 @@ int mhi_init_dev_ctxt(struct mhi_control
 		 * ring is empty
 		 */
 		ring->rp = ring->wp = ring->base;
-		er_ctxt->rbase = ring->iommu_base;
+		er_ctxt->rbase = cpu_to_le64(ring->iommu_base);
 		er_ctxt->rp = er_ctxt->wp = er_ctxt->rbase;
-		er_ctxt->rlen = ring->len;
+		er_ctxt->rlen = cpu_to_le64(ring->len);
 		ring->ctxt_wp = &er_ctxt->wp;
 	}
 
@@ -378,9 +378,9 @@ int mhi_init_dev_ctxt(struct mhi_control
 			goto error_alloc_cmd;
 
 		ring->rp = ring->wp = ring->base;
-		cmd_ctxt->rbase = ring->iommu_base;
+		cmd_ctxt->rbase = cpu_to_le64(ring->iommu_base);
 		cmd_ctxt->rp = cmd_ctxt->wp = cmd_ctxt->rbase;
-		cmd_ctxt->rlen = ring->len;
+		cmd_ctxt->rlen = cpu_to_le64(ring->len);
 		ring->ctxt_wp = &cmd_ctxt->wp;
 	}
 
@@ -581,10 +581,10 @@ void mhi_deinit_chan_ctxt(struct mhi_con
 	chan_ctxt->rp = 0;
 	chan_ctxt->wp = 0;
 
-	tmp = chan_ctxt->chcfg;
+	tmp = le32_to_cpu(chan_ctxt->chcfg);
 	tmp &= ~CHAN_CTX_CHSTATE_MASK;
 	tmp |= (MHI_CH_STATE_DISABLED << CHAN_CTX_CHSTATE_SHIFT);
-	chan_ctxt->chcfg = tmp;
+	chan_ctxt->chcfg = cpu_to_le32(tmp);
 
 	/* Update to all cores */
 	smp_wmb();
@@ -618,14 +618,14 @@ int mhi_init_chan_ctxt(struct mhi_contro
 		return -ENOMEM;
 	}
 
-	tmp = chan_ctxt->chcfg;
+	tmp = le32_to_cpu(chan_ctxt->chcfg);
 	tmp &= ~CHAN_CTX_CHSTATE_MASK;
 	tmp |= (MHI_CH_STATE_ENABLED << CHAN_CTX_CHSTATE_SHIFT);
-	chan_ctxt->chcfg = tmp;
+	chan_ctxt->chcfg = cpu_to_le32(tmp);
 
-	chan_ctxt->rbase = tre_ring->iommu_base;
+	chan_ctxt->rbase = cpu_to_le64(tre_ring->iommu_base);
 	chan_ctxt->rp = chan_ctxt->wp = chan_ctxt->rbase;
-	chan_ctxt->rlen = tre_ring->len;
+	chan_ctxt->rlen = cpu_to_le64(tre_ring->len);
 	tre_ring->ctxt_wp = &chan_ctxt->wp;
 
 	tre_ring->rp = tre_ring->wp = tre_ring->base;
drivers/bus/mhi/core/internal.h +60 -59

171 lines not on this page · raw message

drivers/bus/mhi/core/main.c +11 -11
@@ -114,7 +114,7 @@ void mhi_ring_er_db(struct mhi_event *mh
 	struct mhi_ring *ring = &mhi_event->ring;
 
 	mhi_event->db_cfg.process_db(mhi_event->mhi_cntrl, &mhi_event->db_cfg,
-				     ring->db_addr, *ring->ctxt_wp);
+				     ring->db_addr, le64_to_cpu(*ring->ctxt_wp));
 }
 
 void mhi_ring_cmd_db(struct mhi_controller *mhi_cntrl, struct mhi_cmd *mhi_cmd)
@@ -123,7 +123,7 @@ void mhi_ring_cmd_db(struct mhi_controll
 	struct mhi_ring *ring = &mhi_cmd->ring;
 
 	db = ring->iommu_base + (ring->wp - ring->base);
-	*ring->ctxt_wp = db;
+	*ring->ctxt_wp = cpu_to_le64(db);
 	mhi_write_db(mhi_cntrl, ring->db_addr, db);
 }
 
@@ -140,7 +140,7 @@ void mhi_ring_chan_db(struct mhi_control
 	 * before letting h/w know there is new element to fetch.
 	 */
 	dma_wmb();
-	*ring->ctxt_wp = db;
+	*ring->ctxt_wp = cpu_to_le64(db);
 
 	mhi_chan->db_cfg.process_db(mhi_cntrl, &mhi_chan->db_cfg,
 				    ring->db_addr, db);
@@ -432,7 +432,7 @@ irqreturn_t mhi_irq_handler(int irq_numb
 	struct mhi_event_ctxt *er_ctxt =
 		&mhi_cntrl->mhi_ctxt->er_ctxt[mhi_event->er_index];
 	struct mhi_ring *ev_ring = &mhi_event->ring;
-	dma_addr_t ptr = er_ctxt->rp;
+	dma_addr_t ptr = le64_to_cpu(er_ctxt->rp);
 	void *dev_rp;
 
 	if (!is_valid_ring_ptr(ev_ring, ptr)) {
@@ -537,14 +537,14 @@ static void mhi_recycle_ev_ring_element(
 
 	/* Update the WP */
 	ring->wp += ring->el_size;
-	ctxt_wp = *ring->ctxt_wp + ring->el_size;
+	ctxt_wp = le64_to_cpu(*ring->ctxt_wp) + ring->el_size;
 
 	if (ring->wp >= (ring->base + ring->len)) {
 		ring->wp = ring->base;
 		ctxt_wp = ring->iommu_base;
 	}
 
-	*ring->ctxt_wp = ctxt_wp;
+	*ring->ctxt_wp = cpu_to_le64(ctxt_wp);
 
 	/* Update the RP */
 	ring->rp += ring->el_size;
@@ -801,7 +801,7 @@ int mhi_process_ctrl_ev_ring(struct mhi_
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	u32 chan;
 	int count = 0;
-	dma_addr_t ptr = er_ctxt->rp;
+	dma_addr_t ptr = le64_to_cpu(er_ctxt->rp);
 
 	/*
 	 * This is a quick check to avoid unnecessary event processing
@@ -940,7 +940,7 @@ int mhi_process_ctrl_ev_ring(struct mhi_
 		mhi_recycle_ev_ring_element(mhi_cntrl, ev_ring);
 		local_rp = ev_ring->rp;
 
-		ptr = er_ctxt->rp;
+		ptr = le64_to_cpu(er_ctxt->rp);
 		if (!is_valid_ring_ptr(ev_ring, ptr)) {
 			dev_err(&mhi_cntrl->mhi_dev->dev,
 				"Event ring rp points outside of the event ring\n");
@@ -970,7 +970,7 @@ int mhi_process_data_event_ring(struct m
 	int count = 0;
 	u32 chan;
 	struct mhi_chan *mhi_chan;
-	dma_addr_t ptr = er_ctxt->rp;
+	dma_addr_t ptr = le64_to_cpu(er_ctxt->rp);
 
 	if (unlikely(MHI_EVENT_ACCESS_INVALID(mhi_cntrl->pm_state)))
 		return -EIO;
@@ -1011,7 +1011,7 @@ int mhi_process_data_event_ring(struct m
 		mhi_recycle_ev_ring_element(mhi_cntrl, ev_ring);
 		local_rp = ev_ring->rp;
 
-		ptr = er_ctxt->rp;
+		ptr = le64_to_cpu(er_ctxt->rp);
 		if (!is_valid_ring_ptr(ev_ring, ptr)) {
 			dev_err(&mhi_cntrl->mhi_dev->dev,
 				"Event ring rp points outside of the event ring\n");
@@ -1533,7 +1533,7 @@ static void mhi_mark_stale_events(struct
 	/* mark all stale events related to channel as STALE event */
 	spin_lock_irqsave(&mhi_event->lock, flags);
 
-	ptr = er_ctxt->rp;
+	ptr = le64_to_cpu(er_ctxt->rp);
 	if (!is_valid_ring_ptr(ev_ring, ptr)) {
 		dev_err(&mhi_cntrl->mhi_dev->dev,
 			"Event ring rp points outside of the event ring\n");
drivers/bus/mhi/core/pm.c +2 -2
@@ -218,7 +218,7 @@ int mhi_ready_state_transition(struct mh
 			continue;
 
 		ring->wp = ring->base + ring->len - ring->el_size;
-		*ring->ctxt_wp = ring->iommu_base + ring->len - ring->el_size;
+		*ring->ctxt_wp = cpu_to_le64(ring->iommu_base + ring->len - ring->el_size);
 		/* Update all cores */
 		smp_wmb();
 
@@ -420,7 +420,7 @@ static int mhi_pm_mission_mode_transitio
 			continue;
 
 		ring->wp = ring->base + ring->len - ring->el_size;
-		*ring->ctxt_wp = ring->iommu_base + ring->len - ring->el_size;
+		*ring->ctxt_wp = cpu_to_le64(ring->iommu_base + ring->len - ring->el_size);
 		/* Update to all cores */
 		smp_wmb();
 
author maintainer
#25 lore raw

PATCH 25/1126 docs: sphinx/requirements: Limit jinja2<3.1

In reply to Greg Kroah-Hartman

From: Akira Yokosawa <[email protected]>

commit be78837ca3c88eebd405103a7a2ce891c466b0db upstream.

jinja2 release 3.1.0 (March 24, 2022) broke Sphinx<4.0. This looks like the result of deprecating Python 3.6. It has been tested against Sphinx 4.3.0 and later.

Setting an upper limit of <3.1 to junja2 can unbreak Sphinx<4.0 including Sphinx 2.4.4.

---
 Documentation/sphinx/requirements.txt |    2 ++
 1 file changed, 2 insertions(+)
Documentation/sphinx/requirements.txt +2 -0
@@ -1,2 +1,4 @@
+# jinja2>=3.1 is not compatible with Sphinx<4.0
+jinja2<3.1
 sphinx_rtd_theme
 Sphinx==2.4.4
author maintainer
#26 lore raw

PATCH 26/1126 coresight: Fix TRCCONFIGR.QE sysfs interface

In reply to Greg Kroah-Hartman

From: James Clark <[email protected]>

commit ea75a342aed5ed72c87f38fbe0df2f5df7eae374 upstream.

It's impossible to program a valid value for TRCCONFIGR.QE when TRCIDR0.QSUPP==0b10. In that case the following is true:

Q element support is implemented, and only supports Q elements without instruction counts. TRCCONFIGR.QE can only take the values 0b00 or 0b11.

Currently the low bit of QSUPP is checked to see if the low bit of QE can be written to, but as you can see when QSUPP==0b10 the low bit is cleared making it impossible to ever write the only valid value of 0b11 to QE. 0b10 would be written instead, which is a reserved QE value even for all values of QSUPP.

The fix is to allow writing the low bit of QE for any non zero value of QSUPP.

This change also ensures that the low bit is always set, even when the user attempts to only set the high bit.

Fixes d8c66962084f ("coresight-etm4x: Controls pertaining to the reset, mode, pe and events")
---
 drivers/hwtracing/coresight/coresight-etm4x-sysfs.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +6 -2
@@ -367,8 +367,12 @@ static ssize_t mode_store(struct device
 	mode = ETM_MODE_QELEM(config->mode);
 	/* start by clearing QE bits */
 	config->cfg &= ~(BIT(13) | BIT(14));
-	/* if supported, Q elements with instruction counts are enabled */
-	if ((mode & BIT(0)) && (drvdata->q_support & BIT(0)))
+	/*
+	 * if supported, Q elements with instruction counts are enabled.
+	 * Always set the low bit for any requested mode. Valid combos are
+	 * 0b00, 0b01 and 0b11.
+	 */
+	if (mode && drvdata->q_support)
 		config->cfg |= BIT(13);
 	/*
 	 * if supported, Q elements with and without instruction
author maintainer
#27 lore raw

PATCH 27/1126 coresight: syscfg: Fix memleak on registration failure in cscfg_create_device

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

commit cfa5dbcdd7aece76f3415284569f2f384aff0253 upstream.

device_register() calls device_initialize(),
according to doc of device_initialize:

Use put_device() to give up your reference instead of freeing
* @dev directly once you have called this function.

To prevent potential memleak, use put_device() for error handling.

Fixes 85e2414c518a ("coresight: syscfg: Initial coresight system configuration")
---
 drivers/hwtracing/coresight/coresight-syscfg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwtracing/coresight/coresight-syscfg.c +1 -1
@@ -1049,7 +1049,7 @@ static int cscfg_create_device(void)
 
 	err = device_register(dev);
 	if (err)
-		cscfg_dev_release(dev);
+		put_device(dev);
 
 create_dev_exit_unlock:
 	mutex_unlock(&cscfg_mutex);
author maintainer
#28 lore raw

PATCH 28/1126 dt-bindings: iio: adc: zynqmp_ams: Add clock entry

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

commit 5165102efa41c2aedc77441612f4506a8a8671db upstream.

The AMS driver DT binding was missing the clock entry, which is actually mandatory according to the driver implementation. Add this in.

---
 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml |    8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml +8 -0
@@ -92,6 +92,10 @@ properties:
     description: AMS Controller register space
     maxItems: 1
 
+  clocks:
+    items:
+      - description: AMS reference clock
+
   ranges:
     description:
       Maps the child address space for PS and/or PL.
@@ -181,12 +185,15 @@ properties:
 required:
   - compatible
   - reg
+  - clocks
   - ranges
 
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
     bus {
         #address-cells = <2>;
         #size-cells = <2>;
@@ -196,6 +203,7 @@ examples:
             interrupt-parent = <&gic>;
             interrupts = <0 56 4>;
             reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk AMS_REF>;
             #address-cells = <1>;
             #size-cells = <1>;
             #io-channel-cells = <1>;
author maintainer
#29 lore raw

PATCH 29/1126 iio: adc: xilinx-ams: Fix single channel switching sequence

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

commit 0bf126163c3e7e6d722622073046aed567a5551e upstream.

Some of the AMS channels need to be read by switching into single-channel mode from the normal polling sequence. There was a logic issue in this switching code that could cause the first read of these channels to read back as zero.

It appears that the sequencer should be set back to default mode before changing the channel selection, and the channel should be set before switching the sequencer back into single-channel mode.

Also, write 1 to the EOC bit in the status register to clear it before waiting for it to become set, so that we actually wait for a new conversion to complete, and don't proceed based on a previous conversion completing.

---
 drivers/iio/adc/xilinx-ams.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/iio/adc/xilinx-ams.c +8 -2
@@ -530,14 +530,18 @@ static int ams_enable_single_channel(str
 		return -EINVAL;
 	}
 
-	/* set single channel, sequencer off mode */
+	/* put sysmon in a soft reset to change the sequence */
 	ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
-			  AMS_CONF1_SEQ_SINGLE_CHANNEL);
+			  AMS_CONF1_SEQ_DEFAULT);
 
 	/* write the channel number */
 	ams_ps_update_reg(ams, AMS_REG_CONFIG0, AMS_CONF0_CHANNEL_NUM_MASK,
 			  channel_num);
 
+	/* set single channel, sequencer off mode */
+	ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+			  AMS_CONF1_SEQ_SINGLE_CHANNEL);
+
 	return 0;
 }
 
@@ -551,6 +555,8 @@ static int ams_read_vcc_reg(struct ams *
 	if (ret)
 		return ret;
 
+	/* clear end-of-conversion flag, wait for next conversion to complete */
+	writel(expect, ams->base + AMS_ISR_1);
 	ret = readl_poll_timeout(ams->base + AMS_ISR_1, reg, (reg & expect),
 				 AMS_INIT_POLL_TIME_US, AMS_INIT_TIMEOUT_US);
 	if (ret)
author maintainer
#30 lore raw

PATCH 30/1126 iio: accel: mma8452: use the correct logic to get mma8452_data

In reply to Greg Kroah-Hartman

From: Haibo Chen <[email protected]>

commit c87b7b12f48db86ac9909894f4dc0107d7df6375 upstream.

The original logic to get mma8452_data is wrong, the *dev point to the device belong to iio_dev. we can't use this dev to find the correct i2c_client. The original logic happen to work because it finally use dev->driver_data to get iio_dev. Here use the API to_i2c_client() is wrong and make reader confuse. To correct the logic, it should be like this

  struct mma8452_data *data = iio_priv(dev_get_drvdata(dev));

But after commit 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata"), the upper logic also can't work. When try to show the avialable scale in userspace, will meet kernel dump, kernel handle NULL pointer dereference.

So use dev_to_iio_dev() to correct the logic.

Dual fixes tags as the second reflects when the bug was exposed, whilst the first reflects when the original bug was introduced.

Fixes c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data")
Fixes 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata")
---
 drivers/iio/accel/mma8452.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/accel/mma8452.c +2 -2
@@ -379,8 +379,8 @@ static ssize_t mma8452_show_scale_avail(
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct mma8452_data *data = iio_priv(i2c_get_clientdata(
-					     to_i2c_client(dev)));
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct mma8452_data *data = iio_priv(indio_dev);
 
 	return mma8452_show_int_plus_micros(buf, data->chip_info->mma_scales,
 		ARRAY_SIZE(data->chip_info->mma_scales));
author maintainer
#31 lore raw

PATCH 31/1126 iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.

In reply to Greg Kroah-Hartman

From: Billy Tsai <[email protected]>

commit 571426631acf46e2999c7ecd1e9d048172969a43 upstream.

The formula for the ADC sampling period in ast2400/ast2500 is:
ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0]) When ADC0C[9:0] is set to 0 the sampling voltage will be lower than expected, because the hardware may not have enough time to charge/discharge to a stable voltage. This patch use the flag CLK_DIVIDER_ONE_BASED which will use the raw value read from the register, with the value of zero considered invalid to conform to the corrected formula.

---
 drivers/iio/adc/aspeed_adc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/iio/adc/aspeed_adc.c +3 -1
@@ -539,7 +539,9 @@ static int aspeed_adc_probe(struct platf
 	data->clk_scaler = devm_clk_hw_register_divider(
 		&pdev->dev, clk_name, clk_parent_name, scaler_flags,
 		data->base + ASPEED_REG_CLOCK_CONTROL, 0,
-		data->model_data->scaler_bit_width, 0, &data->clk_lock);
+		data->model_data->scaler_bit_width,
+		data->model_data->need_prescaler ? CLK_DIVIDER_ONE_BASED : 0,
+		&data->clk_lock);
 	if (IS_ERR(data->clk_scaler))
 		return PTR_ERR(data->clk_scaler);
 
author maintainer
#32 lore raw

PATCH 32/1126 iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct

In reply to Greg Kroah-Hartman

From: Haibo Chen <[email protected]>

commit 6270bf1f0197739a9cddaf0a40699a99b7357cb5 upstream.

dev_get_drvdata() on iio_dev->dev no longer returns the iio_dev. Use dev_to_iio_dev() to get iio_dev struct.

Fixes 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata")
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +2 -2
@@ -1633,7 +1633,7 @@ st_lsm6dsx_sysfs_sampling_frequency_avai
 					  struct device_attribute *attr,
 					  char *buf)
 {
-	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_to_iio_dev(dev));
 	const struct st_lsm6dsx_odr_table_entry *odr_table;
 	int i, len = 0;
 
@@ -1651,7 +1651,7 @@ static ssize_t st_lsm6dsx_sysfs_scale_av
 					    struct device_attribute *attr,
 					    char *buf)
 {
-	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_to_iio_dev(dev));
 	const struct st_lsm6dsx_fs_table_entry *fs_table;
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int i, len = 0;
author maintainer
#33 lore raw

PATCH 33/1126 iio: afe: rescale: use s64 for temporary scale calculations

In reply to Greg Kroah-Hartman

From: Liam Beguin <[email protected]>

commit 51593106b608ae4247cc8da928813347da16d025 upstream.

All four scaling coefficients can take signed values. Make tmp a signed 64-bit integer and switch to div_s64() to preserve signs during 64-bit divisions.

---
 drivers/iio/afe/iio-rescale.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/afe/iio-rescale.c +4 -4
@@ -39,7 +39,7 @@ static int rescale_read_raw(struct iio_d
 			    int *val, int *val2, long mask)
 {
 	struct rescale *rescale = iio_priv(indio_dev);
-	unsigned long long tmp;
+	s64 tmp;
 	int ret;
 
 	switch (mask) {
@@ -77,10 +77,10 @@ static int rescale_read_raw(struct iio_d
 			*val2 = rescale->denominator;
 			return IIO_VAL_FRACTIONAL;
 		case IIO_VAL_FRACTIONAL_LOG2:
-			tmp = *val * 1000000000LL;
-			do_div(tmp, rescale->denominator);
+			tmp = (s64)*val * 1000000000LL;
+			tmp = div_s64(tmp, rescale->denominator);
 			tmp *= rescale->numerator;
-			do_div(tmp, 1000000000LL);
+			tmp = div_s64(tmp, 1000000000LL);
 			*val = tmp;
 			return ret;
 		default:
author maintainer
#34 lore raw

PATCH 34/1126 iio: adc: xilinx-ams: Fixed missing PS channels

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

commit 1f21a41578062d439cc485bce2d8b664f9a6170e upstream.

The code forgot to increment num_channels for the PS channel inputs, resulting in them not being enabled as they should.

---
 drivers/iio/adc/xilinx-ams.c |    1 +
 1 file changed, 1 insertion(+)
drivers/iio/adc/xilinx-ams.c +1 -0
@@ -1230,6 +1230,7 @@ static int ams_init_module(struct iio_de
 
 		/* add PS channels to iio device channels */
 		memcpy(channels, ams_ps_channels, sizeof(ams_ps_channels));
+		num_channels = ARRAY_SIZE(ams_ps_channels);
 	} else if (fwnode_property_match_string(fwnode, "compatible",
 						"xlnx,zynqmp-ams-pl") == 0) {
 		ams->pl_base = fwnode_iomap(fwnode, 0);
author maintainer
#35 lore raw

PATCH 35/1126 iio: adc: xilinx-ams: Fixed wrong sequencer register settings

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

commit d5d786fb531697be74c567b3844c6897ddf1ffdd upstream.

Register settings used for the sequencer configuration register were incorrect, causing some inputs to not be read properly.

---
 drivers/iio/adc/xilinx-ams.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/adc/xilinx-ams.c +2 -2
@@ -91,8 +91,8 @@
 
 #define AMS_CONF1_SEQ_MASK		GENMASK(15, 12)
 #define AMS_CONF1_SEQ_DEFAULT		FIELD_PREP(AMS_CONF1_SEQ_MASK, 0)
-#define AMS_CONF1_SEQ_CONTINUOUS	FIELD_PREP(AMS_CONF1_SEQ_MASK, 1)
-#define AMS_CONF1_SEQ_SINGLE_CHANNEL	FIELD_PREP(AMS_CONF1_SEQ_MASK, 2)
+#define AMS_CONF1_SEQ_CONTINUOUS	FIELD_PREP(AMS_CONF1_SEQ_MASK, 2)
+#define AMS_CONF1_SEQ_SINGLE_CHANNEL	FIELD_PREP(AMS_CONF1_SEQ_MASK, 3)
 
 #define AMS_REG_SEQ0_MASK		GENMASK(15, 0)
 #define AMS_REG_SEQ2_MASK		GENMASK(21, 16)
author maintainer
#36 lore raw

PATCH 36/1126 iio: inkern: apply consumer scale on IIO_VAL_INT cases

In reply to Greg Kroah-Hartman

From: Liam Beguin <[email protected]>

commit 1bca97ff95c732a516ebb68da72814194980e0a5 upstream.

When a consumer calls iio_read_channel_processed() and the channel has an integer scale, the scale channel scale is applied and the processed value is returned as expected.

On the other hand, if the consumer calls iio_convert_raw_to_processed() the scaling factor requested by the consumer is not applied.

This for example causes the consumer to process mV when expecting uV. Make sure to always apply the scaling factor requested by the consumer.

---
 drivers/iio/inkern.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/inkern.c +1 -1
@@ -616,7 +616,7 @@ static int iio_convert_raw_to_processed_
 
 	switch (scale_type) {
 	case IIO_VAL_INT:
-		*processed = raw64 * scale_val;
+		*processed = raw64 * scale_val * scale;
 		break;
 	case IIO_VAL_INT_PLUS_MICRO:
 		if (scale_val2 < 0)
author maintainer
#37 lore raw

PATCH 37/1126 iio: inkern: apply consumer scale when no channel scale is available

In reply to Greg Kroah-Hartman

From: Liam Beguin <[email protected]>

commit 14b457fdde38de594a4bc4bd9075019319d978da upstream.

When a consumer calls iio_read_channel_processed() and no channel scale is available, it's assumed that the scale is one and the raw value is returned as expected.

On the other hand, if the consumer calls iio_convert_raw_to_processed() the scaling factor requested by the consumer is not applied.

This for example causes the consumer to process mV when expecting uV. Make sure to always apply the scaling factor requested by the consumer.

---
 drivers/iio/inkern.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iio/inkern.c +3 -3
@@ -607,10 +607,10 @@ static int iio_convert_raw_to_processed_
 					IIO_CHAN_INFO_SCALE);
 	if (scale_type < 0) {
 		/*
-		 * Just pass raw values as processed if no scaling is
-		 * available.
+		 * If no channel scaling is available apply consumer scale to
+		 * raw value and return.
 		 */
-		*processed = raw;
+		*processed = raw * scale;
 		return 0;
 	}
 
author maintainer
#38 lore raw

PATCH 38/1126 iio: inkern: make a best effort on offset calculation

In reply to Greg Kroah-Hartman

From: Liam Beguin <[email protected]>

commit ca85123354e1a65a22170286387b4791997fe864 upstream.

iio_convert_raw_to_processed_unlocked() assumes the offset is an integer. Make a best effort to get a valid offset value for fractional cases without breaking implicit truncations.

---
 drivers/iio/inkern.c |   32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)
drivers/iio/inkern.c +27 -5
@@ -595,13 +595,35 @@ EXPORT_SYMBOL_GPL(iio_read_channel_avera
 static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 	int raw, int *processed, unsigned int scale)
 {
-	int scale_type, scale_val, scale_val2, offset;
+	int scale_type, scale_val, scale_val2;
+	int offset_type, offset_val, offset_val2;
 	s64 raw64 = raw;
-	int ret;
 
-	ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET);
-	if (ret >= 0)
-		raw64 += offset;
+	offset_type = iio_channel_read(chan, &offset_val, &offset_val2,
+				       IIO_CHAN_INFO_OFFSET);
+	if (offset_type >= 0) {
+		switch (offset_type) {
+		case IIO_VAL_INT:
+			break;
+		case IIO_VAL_INT_PLUS_MICRO:
+		case IIO_VAL_INT_PLUS_NANO:
+			/*
+			 * Both IIO_VAL_INT_PLUS_MICRO and IIO_VAL_INT_PLUS_NANO
+			 * implicitely truncate the offset to it's integer form.
+			 */
+			break;
+		case IIO_VAL_FRACTIONAL:
+			offset_val /= offset_val2;
+			break;
+		case IIO_VAL_FRACTIONAL_LOG2:
+			offset_val >>= offset_val2;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		raw64 += offset_val;
+	}
 
 	scale_type = iio_channel_read(chan, &scale_val, &scale_val2,
 					IIO_CHAN_INFO_SCALE);
author maintainer
#39 lore raw

PATCH 39/1126 greybus: svc: fix an error handling bug in gb_svc_hello()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 5f8583a3b7552092582a92e7bbd2153319929ad7 upstream.

Cleanup if gb_svc_queue_deferred_request() fails.

Fixes ee2f2074fdb2 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load")
[johan: fix commit summary prefix and rename label ]
---
 drivers/greybus/svc.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/greybus/svc.c +7 -1
@@ -866,8 +866,14 @@ static int gb_svc_hello(struct gb_operat
 
 	gb_svc_debugfs_init(svc);
 
-	return gb_svc_queue_deferred_request(op);
+	ret = gb_svc_queue_deferred_request(op);
+	if (ret)
+		goto err_remove_debugfs;
 
+	return 0;
+
+err_remove_debugfs:
+	gb_svc_debugfs_exit(svc);
 err_unregister_device:
 	gb_svc_watchdog_destroy(svc);
 	device_del(&svc->dev);
author maintainer
#40 lore raw

PATCH 40/1126 clk: rockchip: re-add rational best approximation algorithm to the fractional divider

In reply to Greg Kroah-Hartman

From: Quentin Schulz <[email protected]>

commit 10b74af310735860510a533433b1d3ab2e05a138 upstream.

In commit 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation algorithm to the CCF users"), the code handling the rational best approximation algorithm was replaced by a call to the core clk_fractional_divider_general_approximation function which did the same thing back then.

However, in commit 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag"), this common code was made conditional on CLK_FRAC_DIVIDER_POWER_OF_TWO_PS flag which was not added back to the rockchip clock driver.

This broke the ltk050h3146w-a2 MIPI DSI display present on a PX30-based downstream board.

Let's add the flag to the fractional divider flags so that the original and intended behavior is brought back to the rockchip clock drivers.

Fixes 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag")
Cc Quentin Schulz <[email protected]>
---
 drivers/clk/rockchip/clk.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/clk/rockchip/clk.c +3 -0
@@ -180,6 +180,7 @@ static void rockchip_fractional_approxim
 		unsigned long rate, unsigned long *parent_rate,
 		unsigned long *m, unsigned long *n)
 {
+	struct clk_fractional_divider *fd = to_clk_fd(hw);
 	unsigned long p_rate, p_parent_rate;
 	struct clk_hw *p_parent;
 
@@ -190,6 +191,8 @@ static void rockchip_fractional_approxim
 		*parent_rate = p_parent_rate;
 	}
 
+	fd->flags |= CLK_FRAC_DIVIDER_POWER_OF_TWO_PS;
+
 	clk_fractional_divider_general_approximation(hw, rate, parent_rate, m, n);
 }
 
author maintainer
#41 lore raw

PATCH 41/1126 clk: uniphier: Fix fixed-rate initialization

In reply to Greg Kroah-Hartman

From: Kunihiko Hayashi <[email protected]>

commit ca85a66710a8a1f6b0719397225c3e9ee0abb692 upstream.

Fixed-rate clocks in UniPhier don't have any parent clocks, however, initial data "init.flags" isn't initialized, so it might be determined that there is a parent clock for fixed-rate clock.

This sets init.flags to zero as initialization.

Fixes 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
---
 drivers/clk/uniphier/clk-uniphier-fixed-rate.c |    1 +
 1 file changed, 1 insertion(+)
drivers/clk/uniphier/clk-uniphier-fixed-rate.c +1 -0
@@ -24,6 +24,7 @@ struct clk_hw *uniphier_clk_register_fix
 
 	init.name = name;
 	init.ops = &clk_fixed_rate_ops;
+	init.flags = 0;
 	init.parent_names = NULL;
 	init.num_parents = 0;
 
author maintainer
#42 lore raw

PATCH 42/1126 ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE

In reply to Greg Kroah-Hartman

From: Jann Horn <[email protected]>

commit ee1fee900537b5d9560e9f937402de5ddc8412f3 upstream.

Setting PTRACE_O_SUSPEND_SECCOMP is supposed to be a highly privileged operation because it allows the tracee to completely bypass all seccomp filters on kernels with CONFIG_CHECKPOINT_RESTORE=y. It is only supposed to be settable by a process with global CAP_SYS_ADMIN, and only if that process is not subject to any seccomp filters at all.

However, while these permission checks were done on the PTRACE_SETOPTIONS path, they were missing on the PTRACE_SEIZE path, which also sets user-specified ptrace flags.

Move the permissions checks out into a helper function and let both ptrace_attach() and ptrace_setoptions() call it.

Fixes 13c4a90119d2 ("seccomp: add ptrace options for suspend/resume")
---
 kernel/ptrace.c |   47 ++++++++++++++++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 15 deletions(-)
kernel/ptrace.c +32 -15
@@ -371,6 +371,26 @@ bool ptrace_may_access(struct task_struc
 	return !err;
 }
 
+static int check_ptrace_options(unsigned long data)
+{
+	if (data & ~(unsigned long)PTRACE_O_MASK)
+		return -EINVAL;
+
+	if (unlikely(data & PTRACE_O_SUSPEND_SECCOMP)) {
+		if (!IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) ||
+		    !IS_ENABLED(CONFIG_SECCOMP))
+			return -EINVAL;
+
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		if (seccomp_mode(&current->seccomp) != SECCOMP_MODE_DISABLED ||
+		    current->ptrace & PT_SUSPEND_SECCOMP)
+			return -EPERM;
+	}
+	return 0;
+}
+
 static int ptrace_attach(struct task_struct *task, long request,
 			 unsigned long addr,
 			 unsigned long flags)
@@ -382,8 +402,16 @@ static int ptrace_attach(struct task_str
 	if (seize) {
 		if (addr != 0)
 			goto out;
+		/*
+		 * This duplicates the check in check_ptrace_options() because
+		 * ptrace_attach() and ptrace_setoptions() have historically
+		 * used different error codes for unknown ptrace options.
+		 */
 		if (flags & ~(unsigned long)PTRACE_O_MASK)
 			goto out;
+		retval = check_ptrace_options(flags);
+		if (retval)
+			return retval;
 		flags = PT_PTRACED | PT_SEIZED | (flags << PT_OPT_FLAG_SHIFT);
 	} else {
 		flags = PT_PTRACED;
@@ -654,22 +682,11 @@ int ptrace_writedata(struct task_struct
 static int ptrace_setoptions(struct task_struct *child, unsigned long data)
 {
 	unsigned flags;
+	int ret;
 
-	if (data & ~(unsigned long)PTRACE_O_MASK)
-		return -EINVAL;
-
-	if (unlikely(data & PTRACE_O_SUSPEND_SECCOMP)) {
-		if (!IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) ||
-		    !IS_ENABLED(CONFIG_SECCOMP))
-			return -EINVAL;
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EPERM;
-
-		if (seccomp_mode(&current->seccomp) != SECCOMP_MODE_DISABLED ||
-		    current->ptrace & PT_SUSPEND_SECCOMP)
-			return -EPERM;
-	}
+	ret = check_ptrace_options(data);
+	if (ret)
+		return ret;
 
 	/* Avoid intermediate state when all opts are cleared */
 	flags = child->ptrace;
author maintainer
#43 lore raw

PATCH 43/1126 cifs: truncate the inode and mapping when we simulate fcollapse

In reply to Greg Kroah-Hartman

From: Ronnie Sahlberg <[email protected]>

commit 84330d41efb12bc227899e54dbdbe7d9590cb2b7 upstream.

RHBZ:1997367

When we collapse a range in smb3_collapse_range() we must make sure we update the inode size and pagecache accordingly.

If not, both inode size and pagecahce may be stale until it is refreshed.

This can be demonstrated for the inode size by running :

xfs_io -i -f -c "truncate 320k" -c "fcollapse 64k 128k" -c "fiemap -v" \
/mnt/testfile

where we can see the result of stale data in the fiemap output. The third line of the output is wrong, all this data should be truncated.

 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..127]:        hole               128
   1: [128..383]:      128..383           256   0x1
   2: [384..639]:      hole               256

And the correct output, when the inode size has been updated correctly should look like this:

 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..127]:        hole               128
   1: [128..383]:      128..383           256   0x1
---
 fs/cifs/smb2ops.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
fs/cifs/smb2ops.c +14 -4
@@ -25,6 +25,7 @@
 #include "smb2glob.h"
 #include "cifs_ioctl.h"
 #include "smbdirect.h"
+#include "fscache.h"
 #include "fs_context.h"
 
 /* Change credits for different ops and return the total number of credits */
@@ -3887,29 +3888,38 @@ static long smb3_collapse_range(struct f
 {
 	int rc;
 	unsigned int xid;
+	struct inode *inode;
 	struct cifsFileInfo *cfile = file->private_data;
+	struct cifsInodeInfo *cifsi;
 	__le64 eof;
 
 	xid = get_xid();
 
-	if (off >= i_size_read(file->f_inode) ||
-	    off + len >= i_size_read(file->f_inode)) {
+	inode = d_inode(cfile->dentry);
+	cifsi = CIFS_I(inode);
+
+	if (off >= i_size_read(inode) ||
+	    off + len >= i_size_read(inode)) {
 		rc = -EINVAL;
 		goto out;
 	}
 
 	rc = smb2_copychunk_range(xid, cfile, cfile, off + len,
-				  i_size_read(file->f_inode) - off - len, off);
+				  i_size_read(inode) - off - len, off);
 	if (rc < 0)
 		goto out;
 
-	eof = cpu_to_le64(i_size_read(file->f_inode) - len);
+	eof = cpu_to_le64(i_size_read(inode) - len);
 	rc = SMB2_set_eof(xid, tcon, cfile->fid.persistent_fid,
 			  cfile->fid.volatile_fid, cfile->pid, &eof);
 	if (rc < 0)
 		goto out;
 
 	rc = 0;
+
+	cifsi->server_eof = i_size_read(inode) - len;
+	truncate_setsize(inode, cifsi->server_eof);
+	fscache_resize_cookie(cifs_inode_cookie(inode), cifsi->server_eof);
  out:
 	free_xid(xid);
 	return rc;
author maintainer
#44 lore raw

PATCH 44/1126 cifs: fix handlecache and multiuser

In reply to Greg Kroah-Hartman

From: Ronnie Sahlberg <[email protected]>

commit 47178c7722ac528ea08aa82c3ef9ffa178962d7a upstream.

In multiuser each individual user has their own tcon structure for the share and thus their own handle for a cached directory.
When we umount such a share we much make sure to release the pinned down dentry for each such tcon and not just the master tcon.

Otherwise we will get nasty warnings on umount that dentries are still in use:

[ 3459.590047] BUG: Dentry 00000000115c6f41{i=12000000019d95,n=/}  still in use\
 (2) [unmount of cifs cifs]
...
[ 3459.590492] Call Trace:
[ 3459.590500]  d_walk+0x61/0x2a0
[ 3459.590518]  ? shrink_lock_dentry.part.0+0xe0/0xe0
[ 3459.590526]  shrink_dcache_for_umount+0x49/0x110
[ 3459.590535]  generic_shutdown_super+0x1a/0x110
[ 3459.590542]  kill_anon_super+0x14/0x30
[ 3459.590549]  cifs_kill_sb+0xf5/0x104 [cifs]
[ 3459.590773]  deactivate_locked_super+0x36/0xa0
[ 3459.590782]  cleanup_mnt+0x131/0x190
[ 3459.590789]  task_work_run+0x5c/0x90
[ 3459.590798]  exit_to_user_mode_loop+0x151/0x160
[ 3459.590809]  exit_to_user_mode_prepare+0x83/0xd0
[ 3459.590818]  syscall_exit_to_user_mode+0x12/0x30
[ 3459.590828]  do_syscall_64+0x48/0x90
[ 3459.590833]  entry_SYSCALL_64_after_hwframe+0x44/0xae
---
 fs/cifs/cifsfs.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
fs/cifs/cifsfs.c +10 -3
@@ -254,6 +254,9 @@ static void cifs_kill_sb(struct super_bl
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
 	struct cifs_tcon *tcon;
 	struct cached_fid *cfid;
+	struct rb_root *root = &cifs_sb->tlink_tree;
+	struct rb_node *node;
+	struct tcon_link *tlink;
 
 	/*
 	 * We ned to release all dentries for the cached directories
@@ -263,17 +266,21 @@ static void cifs_kill_sb(struct super_bl
 		dput(cifs_sb->root);
 		cifs_sb->root = NULL;
 	}
-	tcon = cifs_sb_master_tcon(cifs_sb);
-	if (tcon) {
+	spin_lock(&cifs_sb->tlink_tree_lock);
+	node = rb_first(root);
+	while (node != NULL) {
+		tlink = rb_entry(node, struct tcon_link, tl_rbnode);
+		tcon = tlink_tcon(tlink);
 		cfid = &tcon->crfid;
 		mutex_lock(&cfid->fid_mutex);
 		if (cfid->dentry) {
-
 			dput(cfid->dentry);
 			cfid->dentry = NULL;
 		}
 		mutex_unlock(&cfid->fid_mutex);
+		node = rb_next(node);
 	}
+	spin_unlock(&cifs_sb->tlink_tree_lock);
 
 	kill_anon_super(sb);
 	cifs_umount(cifs_sb);
author maintainer
#45 lore raw

PATCH 45/1126 cifs: we do not need a spinlock around the tree access during umount

In reply to Greg Kroah-Hartman

From: Ronnie Sahlberg <[email protected]>

commit 9a14b65d590105d393b63f5320e1594edda7c672 upstream.

Remove the spinlock around the tree traversal as we are calling possibly sleeping functions.
We do not need a spinlock here as there will be no modifications to this tree at this point.

This prevents warnings like this to occur in dmesg:

[  653.774996] BUG: sleeping function called from invalid context at kernel/loc\
king/mutex.c:280
[  653.775088] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1827, nam\
e: umount
[  653.775152] preempt_count: 1, expected: 0
[  653.775191] CPU: 0 PID: 1827 Comm: umount Tainted: G        W  OE     5.17.0\
-rc7-00006-g4eb628dd74df #135
[  653.775195] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-\
1.fc33 04/01/2014
[  653.775197] Call Trace:
[  653.775199]  <TASK>
[  653.775202]  dump_stack_lvl+0x34/0x44
[  653.775209]  __might_resched.cold+0x13f/0x172
[  653.775213]  mutex_lock+0x75/0xf0
[  653.775217]  ? __mutex_lock_slowpath+0x10/0x10
[  653.775220]  ? _raw_write_lock_irq+0xd0/0xd0
[  653.775224]  ? dput+0x6b/0x360
[  653.775228]  cifs_kill_sb+0xff/0x1d0 [cifs]
[  653.775285]  deactivate_locked_super+0x85/0x130
[  653.775289]  cleanup_mnt+0x32c/0x4d0
[  653.775292]  ? path_umount+0x228/0x380
[  653.775296]  task_work_run+0xd8/0x180
[  653.775301]  exit_to_user_mode_loop+0x152/0x160
[  653.775306]  exit_to_user_mode_prepare+0x89/0xd0
[  653.775315]  syscall_exit_to_user_mode+0x12/0x30
[  653.775322]  do_syscall_64+0x48/0x90
[  653.775326]  entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes 187af6e98b44e5d8f25e1d41a92db138eb54416f ("cifs: fix handlecache and multiuser")
---
 fs/cifs/cifsfs.c |    2 --
 1 file changed, 2 deletions(-)
fs/cifs/cifsfs.c +0 -2
@@ -266,7 +266,6 @@ static void cifs_kill_sb(struct super_bl
 		dput(cifs_sb->root);
 		cifs_sb->root = NULL;
 	}
-	spin_lock(&cifs_sb->tlink_tree_lock);
 	node = rb_first(root);
 	while (node != NULL) {
 		tlink = rb_entry(node, struct tcon_link, tl_rbnode);
@@ -280,7 +279,6 @@ static void cifs_kill_sb(struct super_bl
 		mutex_unlock(&cfid->fid_mutex);
 		node = rb_next(node);
 	}
-	spin_unlock(&cifs_sb->tlink_tree_lock);
 
 	kill_anon_super(sb);
 	cifs_umount(cifs_sb);
author maintainer
#46 lore raw

PATCH 46/1126 KEYS: fix length validation in keyctl_pkey_params_get_2()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit c51abd96837f600d8fd940b6ab8e2da578575504 upstream.

In many cases, keyctl_pkey_params_get_2() is validating the user buffer lengths against the wrong algorithm properties. Fix it to check against the correct properties.

Probably this wasn't noticed before because for all asymmetric keys of the "public_key" subtype, max_data_size == max_sig_size == max_enc_size == max_dec_size. However, this isn't necessarily true for the "asym_tpm" subtype (it should be, but it's not strictly validated). Of course, future key types could have different values as well.

Fixes 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc <[email protected]> # v4.20+
---
 security/keys/keyctl_pkey.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
security/keys/keyctl_pkey.c +11 -3
@@ -135,15 +135,23 @@ static int keyctl_pkey_params_get_2(cons
 
 	switch (op) {
 	case KEYCTL_PKEY_ENCRYPT:
+		if (uparams.in_len  > info.max_dec_size ||
+		    uparams.out_len > info.max_enc_size)
+			return -EINVAL;
+		break;
 	case KEYCTL_PKEY_DECRYPT:
 		if (uparams.in_len  > info.max_enc_size ||
 		    uparams.out_len > info.max_dec_size)
 			return -EINVAL;
 		break;
 	case KEYCTL_PKEY_SIGN:
+		if (uparams.in_len  > info.max_data_size ||
+		    uparams.out_len > info.max_sig_size)
+			return -EINVAL;
+		break;
 	case KEYCTL_PKEY_VERIFY:
-		if (uparams.in_len  > info.max_sig_size ||
-		    uparams.out_len > info.max_data_size)
+		if (uparams.in_len  > info.max_data_size ||
+		    uparams.in2_len > info.max_sig_size)
 			return -EINVAL;
 		break;
 	default:
@@ -151,7 +159,7 @@ static int keyctl_pkey_params_get_2(cons
 	}
 
 	params->in_len  = uparams.in_len;
-	params->out_len = uparams.out_len;
+	params->out_len = uparams.out_len; /* Note: same as in2_len */
 	return 0;
 }
 
author maintainer
#47 lore raw

PATCH 47/1126 KEYS: asymmetric: enforce that sig algo matches key algo

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 2abc9c246e0548e52985b10440c9ea3e9f65f793 upstream.

Most callers of public_key_verify_signature(), including most indirect callers via verify_signature() as well as pkcs7_verify_sig_chain(), don't check that public_key_signature::pkey_algo matches public_key::pkey_algo. These should always match. However, a malicious signature could intentionally declare an unintended algorithm. It is essential that such signatures be rejected outright, or that the algorithm of the *key* be used -- not the algorithm of the signature as that would allow attackers to choose the algorithm used.

Currently, public_key_verify_signature() correctly uses the key's algorithm when deciding which akcipher to allocate. That's good. However, it uses the signature's algorithm when deciding whether to do the first step of SM2, which is incorrect. Also, v4.19 and older kernels used the signature's algorithm for the entire process.

Prevent such errors by making public_key_verify_signature() enforce that the signature's algorithm (if given) matches the key's algorithm.

Also remove two checks of this done by callers, which are now redundant.

---
 crypto/asymmetric_keys/pkcs7_verify.c    |    6 ------
 crypto/asymmetric_keys/public_key.c      |   15 +++++++++++++++
 crypto/asymmetric_keys/x509_public_key.c |    6 ------
 3 files changed, 15 insertions(+), 12 deletions(-)
crypto/asymmetric_keys/pkcs7_verify.c +0 -6
@@ -174,12 +174,6 @@ static int pkcs7_find_key(struct pkcs7_m
 		pr_devel("Sig %u: Found cert serial match X.509[%u]\n",
 			 sinfo->index, certix);
 
-		if (strcmp(x509->pub->pkey_algo, sinfo->sig->pkey_algo) != 0) {
-			pr_warn("Sig %u: X.509 algo and PKCS#7 sig algo don't match\n",
-				sinfo->index);
-			continue;
-		}
-
 		sinfo->signer = x509;
 		return 0;
 	}
crypto/asymmetric_keys/public_key.c +15 -0
@@ -325,6 +325,21 @@ int public_key_verify_signature(const st
 	BUG_ON(!sig);
 	BUG_ON(!sig->s);
 
+	/*
+	 * If the signature specifies a public key algorithm, it *must* match
+	 * the key's actual public key algorithm.
+	 *
+	 * Small exception: ECDSA signatures don't specify the curve, but ECDSA
+	 * keys do.  So the strings can mismatch slightly in that case:
+	 * "ecdsa-nist-*" for the key, but "ecdsa" for the signature.
+	 */
+	if (sig->pkey_algo) {
+		if (strcmp(pkey->pkey_algo, sig->pkey_algo) != 0 &&
+		    (strncmp(pkey->pkey_algo, "ecdsa-", 6) != 0 ||
+		     strcmp(sig->pkey_algo, "ecdsa") != 0))
+			return -EKEYREJECTED;
+	}
+
 	ret = software_key_determine_akcipher(sig->encoding,
 					      sig->hash_algo,
 					      pkey, alg_name);
crypto/asymmetric_keys/x509_public_key.c +0 -6
@@ -128,12 +128,6 @@ int x509_check_for_self_signed(struct x5
 			goto out;
 	}
 
-	ret = -EKEYREJECTED;
-	if (strcmp(cert->pub->pkey_algo, cert->sig->pkey_algo) != 0 &&
-	    (strncmp(cert->pub->pkey_algo, "ecdsa-", 6) != 0 ||
-	     strcmp(cert->sig->pkey_algo, "ecdsa") != 0))
-		goto out;
-
 	ret = public_key_verify_signature(cert->pub, cert->sig);
 	if (ret < 0) {
 		if (ret == -ENOPKG) {
author maintainer
#48 lore raw

PATCH 48/1126 KEYS: asymmetric: properly validate hash_algo and encoding

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 590bfb57b2328951d5833979e7ca1d5fde2e609a upstream.

It is insecure to allow arbitrary hash algorithms and signature encodings to be used with arbitrary signature algorithms. Notably, ECDSA, ECRDSA, and SM2 all sign/verify raw hash values and don't disambiguate between different hash algorithms like RSA PKCS#1 v1.5 padding does. Therefore, they need to be restricted to certain sets of hash algorithms (ideally just one, but in practice small sets are used). Additionally, the encoding is an integral part of modern signature algorithms, and is not supposed to vary.

Therefore, tighten the checks of hash_algo and encoding done by software_key_determine_akcipher().

Also rearrange the parameters to software_key_determine_akcipher() to put the public_key first, as this is the most important parameter and it often determines everything else.

Fixes 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys")
Fixes 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Fixes 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
---
 crypto/asymmetric_keys/public_key.c |  111 ++++++++++++++++++++++++------------
 1 file changed, 76 insertions(+), 35 deletions(-)
crypto/asymmetric_keys/public_key.c +76 -35
@@ -60,39 +60,83 @@ static void public_key_destroy(void *pay
 }
 
 /*
- * Determine the crypto algorithm name.
+ * Given a public_key, and an encoding and hash_algo to be used for signing
+ * and/or verification with that key, determine the name of the corresponding
+ * akcipher algorithm.  Also check that encoding and hash_algo are allowed.
  */
-static
-int software_key_determine_akcipher(const char *encoding,
-				    const char *hash_algo,
-				    const struct public_key *pkey,
-				    char alg_name[CRYPTO_MAX_ALG_NAME])
+static int
+software_key_determine_akcipher(const struct public_key *pkey,
+				const char *encoding, const char *hash_algo,
+				char alg_name[CRYPTO_MAX_ALG_NAME])
 {
 	int n;
 
-	if (strcmp(encoding, "pkcs1") == 0) {
-		/* The data wangled by the RSA algorithm is typically padded
-		 * and encoded in some manner, such as EMSA-PKCS1-1_5 [RFC3447
-		 * sec 8.2].
+	if (!encoding)
+		return -EINVAL;
+
+	if (strcmp(pkey->pkey_algo, "rsa") == 0) {
+		/*
+		 * RSA signatures usually use EMSA-PKCS1-1_5 [RFC3447 sec 8.2].
+		 */
+		if (strcmp(encoding, "pkcs1") == 0) {
+			if (!hash_algo)
+				n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
+					     "pkcs1pad(%s)",
+					     pkey->pkey_algo);
+			else
+				n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
+					     "pkcs1pad(%s,%s)",
+					     pkey->pkey_algo, hash_algo);
+			return n >= CRYPTO_MAX_ALG_NAME ? -EINVAL : 0;
+		}
+		if (strcmp(encoding, "raw") != 0)
+			return -EINVAL;
+		/*
+		 * Raw RSA cannot differentiate between different hash
+		 * algorithms.
+		 */
+		if (hash_algo)
+			return -EINVAL;
+	} else if (strncmp(pkey->pkey_algo, "ecdsa", 5) == 0) {
+		if (strcmp(encoding, "x962") != 0)
+			return -EINVAL;
+		/*
+		 * ECDSA signatures are taken over a raw hash, so they don't
+		 * differentiate between different hash algorithms.  That means
+		 * that the verifier should hard-code a specific hash algorithm.
+		 * Unfortunately, in practice ECDSA is used with multiple SHAs,
+		 * so we have to allow all of them and not just one.
 		 */
 		if (!hash_algo)
-			n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
-				     "pkcs1pad(%s)",
-				     pkey->pkey_algo);
-		else
-			n = snprintf(alg_name, CRYPTO_MAX_ALG_NAME,
-				     "pkcs1pad(%s,%s)",
-				     pkey->pkey_algo, hash_algo);
-		return n >= CRYPTO_MAX_ALG_NAME ? -EINVAL : 0;
-	}
-
-	if (strcmp(encoding, "raw") == 0 ||
-	    strcmp(encoding, "x962") == 0) {
-		strcpy(alg_name, pkey->pkey_algo);
-		return 0;
+			return -EINVAL;
+		if (strcmp(hash_algo, "sha1") != 0 &&
+		    strcmp(hash_algo, "sha224") != 0 &&
+		    strcmp(hash_algo, "sha256") != 0 &&
+		    strcmp(hash_algo, "sha384") != 0 &&
+		    strcmp(hash_algo, "sha512") != 0)
+			return -EINVAL;
+	} else if (strcmp(pkey->pkey_algo, "sm2") == 0) {
+		if (strcmp(encoding, "raw") != 0)
+			return -EINVAL;
+		if (!hash_algo)
+			return -EINVAL;
+		if (strcmp(hash_algo, "sm3") != 0)
+			return -EINVAL;
+	} else if (strcmp(pkey->pkey_algo, "ecrdsa") == 0) {
+		if (strcmp(encoding, "raw") != 0)
+			return -EINVAL;
+		if (!hash_algo)
+			return -EINVAL;
+		if (strcmp(hash_algo, "streebog256") != 0 &&
+		    strcmp(hash_algo, "streebog512") != 0)
+			return -EINVAL;
+	} else {
+		/* Unknown public key algorithm */
+		return -ENOPKG;
 	}
-
-	return -ENOPKG;
+	if (strscpy(alg_name, pkey->pkey_algo, CRYPTO_MAX_ALG_NAME) < 0)
+		return -EINVAL;
+	return 0;
 }
 
 static u8 *pkey_pack_u32(u8 *dst, u32 val)
@@ -113,9 +157,8 @@ static int software_key_query(const stru
 	u8 *key, *ptr;
 	int ret, len;
 
-	ret = software_key_determine_akcipher(params->encoding,
-					      params->hash_algo,
-					      pkey, alg_name);
+	ret = software_key_determine_akcipher(pkey, params->encoding,
+					      params->hash_algo, alg_name);
 	if (ret < 0)
 		return ret;
 
@@ -179,9 +222,8 @@ static int software_key_eds_op(struct ke
 
 	pr_devel("==>%s()\n", __func__);
 
-	ret = software_key_determine_akcipher(params->encoding,
-					      params->hash_algo,
-					      pkey, alg_name);
+	ret = software_key_determine_akcipher(pkey, params->encoding,
+					      params->hash_algo, alg_name);
 	if (ret < 0)
 		return ret;
 
@@ -340,9 +382,8 @@ int public_key_verify_signature(const st
 			return -EKEYREJECTED;
 	}
 
-	ret = software_key_determine_akcipher(sig->encoding,
-					      sig->hash_algo,
-					      pkey, alg_name);
+	ret = software_key_determine_akcipher(pkey, sig->encoding,
+					      sig->hash_algo, alg_name);
 	if (ret < 0)
 		return ret;
 
author maintainer
#49 lore raw

PATCH 49/1126 Documentation: add link to stable release candidate tree

In reply to Greg Kroah-Hartman

From: Bagas Sanjaya <[email protected]>

commit 587d39b260c4d090166314d64be70b1f6a26b0b5 upstream.

There is also stable release candidate tree. Mention it, however with a warning that the tree is for testing purposes.

---
 Documentation/process/stable-kernel-rules.rst |    9 +++++++++
 1 file changed, 9 insertions(+)
Documentation/process/stable-kernel-rules.rst +9 -0
@@ -170,6 +170,15 @@ Trees
 
 	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
 
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
+
 
 Review committee
 ----------------
author maintainer
#50 lore raw

PATCH 50/1126 Documentation: update stable tree link

In reply to Greg Kroah-Hartman

From: Bagas Sanjaya <[email protected]>

commit 555d44932c67e617d89bc13c81c7efac5b51fcfa upstream.

The link to stable tree is redirected to
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git. Update accordingly.

---
 Documentation/process/stable-kernel-rules.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/process/stable-kernel-rules.rst +1 -1
@@ -168,7 +168,7 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
 
  - The release candidate of all stable kernel versions can be found at:
 
author maintainer
#51 lore raw

PATCH 51/1126 firmware: stratix10-svc: add missing callback parameter on RSU

In reply to Greg Kroah-Hartman

From: Ang Tien Sung <[email protected]>

commit b850b7a8b369322adf699ef48ceff4d902525c8c upstream.

Fix a bug whereby, the return response of parameter a1 from an SMC call is not properly set to the callback data during an INTEL_SIP_SMC_RSU_ERROR command.

---
 drivers/firmware/stratix10-svc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/firmware/stratix10-svc.c +1 -1
@@ -477,7 +477,7 @@ static int svc_normal_to_secure_thread(v
 		case INTEL_SIP_SMC_RSU_ERROR:
 			pr_err("%s: STATUS_ERROR\n", __func__);
 			cbdata->status = BIT(SVC_STATUS_ERROR);
-			cbdata->kaddr1 = NULL;
+			cbdata->kaddr1 = &res.a1;
 			cbdata->kaddr2 = NULL;
 			cbdata->kaddr3 = NULL;
 			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
author maintainer
#52 lore raw

PATCH 52/1126 firmware: sysfb: fix platform-device leak in error path

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 202c08914ba50dd324e42d5ad99535a89f242560 upstream.

Make sure to free the platform device also in the unlikely event that registration fails.

Fixes 0589e8889dce ("drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb")
Fixes 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc Miaoqian Lin <[email protected]>
Cc Javier Martinez Canillas <[email protected]>
---
 drivers/firmware/sysfb_simplefb.c |   23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)
drivers/firmware/sysfb_simplefb.c +14 -9
@@ -113,16 +113,21 @@ __init int sysfb_create_simplefb(const s
 	sysfb_apply_efi_quirks(pd);
 
 	ret = platform_device_add_resources(pd, &res, 1);
-	if (ret) {
-		platform_device_put(pd);
-		return ret;
-	}
+	if (ret)
+		goto err_put_device;
 
 	ret = platform_device_add_data(pd, mode, sizeof(*mode));
-	if (ret) {
-		platform_device_put(pd);
-		return ret;
-	}
+	if (ret)
+		goto err_put_device;
 
-	return platform_device_add(pd);
+	ret = platform_device_add(pd);
+	if (ret)
+		goto err_put_device;
+
+	return 0;
+
+err_put_device:
+	platform_device_put(pd);
+
+	return ret;
 }
author maintainer
#53 lore raw

PATCH 53/1126 HID: intel-ish-hid: Use dma_alloc_coherent for firmware update

In reply to Greg Kroah-Hartman

From: Gwendal Grignou <[email protected]>

commit f97ec5d75e9261a5da78dc28a8955b7cc0c4468b upstream.

Allocating memory with kmalloc and GPF_DMA32 is not allowed, the allocator will ignore the attribute.

Instead, use dma_alloc_coherent() API as we allocate a small amount of memory to transfer firmware fragment to the ISH.

On Arcada chromebook, after the patch the warning:
"Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xcc0 (GFP_KERNEL). Fix your code!" is gone. The ISH firmware is loaded properly and we can interact with
the ISH:

Quoted 1 line

ectool --name cros_ish version

...

Build info:    arcada_ish_v2.0.3661+3c1a1c1ae0 2022-02-08 05:37:47 @localhost
Tool version:  v2.0.12300-900b03ec7f 2022-02-08 10:01:48 @localhost
Fixes commit 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
---
 drivers/hid/intel-ish-hid/ishtp-fw-loader.c |   29 ++--------------------------
 1 file changed, 3 insertions(+), 26 deletions(-)
drivers/hid/intel-ish-hid/ishtp-fw-loader.c +3 -26
@@ -661,21 +661,12 @@ static int ish_fw_xfer_direct_dma(struct
 	 */
 	payload_max_size &= ~(L1_CACHE_BYTES - 1);
 
-	dma_buf = kmalloc(payload_max_size, GFP_KERNEL | GFP_DMA32);
+	dma_buf = dma_alloc_coherent(devc, payload_max_size, &dma_buf_phy, GFP_KERNEL);
 	if (!dma_buf) {
 		client_data->flag_retry = true;
 		return -ENOMEM;
 	}
 
-	dma_buf_phy = dma_map_single(devc, dma_buf, payload_max_size,
-				     DMA_TO_DEVICE);
-	if (dma_mapping_error(devc, dma_buf_phy)) {
-		dev_err(cl_data_to_dev(client_data), "DMA map failed\n");
-		client_data->flag_retry = true;
-		rv = -ENOMEM;
-		goto end_err_dma_buf_release;
-	}
-
 	ldr_xfer_dma_frag.fragment.hdr.command = LOADER_CMD_XFER_FRAGMENT;
 	ldr_xfer_dma_frag.fragment.xfer_mode = LOADER_XFER_MODE_DIRECT_DMA;
 	ldr_xfer_dma_frag.ddr_phys_addr = (u64)dma_buf_phy;
@@ -695,14 +686,7 @@ static int ish_fw_xfer_direct_dma(struct
 		ldr_xfer_dma_frag.fragment.size = fragment_size;
 		memcpy(dma_buf, &fw->data[fragment_offset], fragment_size);
 
-		dma_sync_single_for_device(devc, dma_buf_phy,
-					   payload_max_size,
-					   DMA_TO_DEVICE);
-
-		/*
-		 * Flush cache here because the dma_sync_single_for_device()
-		 * does not do for x86.
-		 */
+		/* Flush cache to be sure the data is in main memory. */
 		clflush_cache_range(dma_buf, payload_max_size);
 
 		dev_dbg(cl_data_to_dev(client_data),
@@ -725,15 +709,8 @@ static int ish_fw_xfer_direct_dma(struct
 		fragment_offset += fragment_size;
 	}
 
-	dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
-	kfree(dma_buf);
-	return 0;
-
 end_err_resp_buf_release:
-	/* Free ISH buffer if not done already, in error case */
-	dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
-end_err_dma_buf_release:
-	kfree(dma_buf);
+	dma_free_coherent(devc, payload_max_size, dma_buf, dma_buf_phy);
 	return rv;
 }
 
author maintainer
#54 lore raw

PATCH 54/1126 SUNRPC: avoid race between mod_timer() and del_timer_sync()

In reply to Greg Kroah-Hartman

From: NeilBrown <[email protected]>

commit 3848e96edf4788f772d83990022fa7023a233d83 upstream.

xprt_destory() claims XPRT_LOCKED and then calls del_timer_sync(). Both xprt_unlock_connect() and xprt_release() call
->release_xprt()
which drops XPRT_LOCKED and *then* xprt_schedule_autodisconnect() which calls mod_timer().

This may result in mod_timer() being called *after* del_timer_sync(). When this happens, the timer may fire long after the xprt has been freed, and run_timer_softirq() will probably crash.

The pairing of ->release_xprt() and xprt_schedule_autodisconnect() is always called under ->transport_lock. So if we take ->transport_lock to call del_timer_sync(), we can be sure that mod_timer() will run first (if it runs at all).

---
 net/sunrpc/xprt.c |    7 +++++++
 1 file changed, 7 insertions(+)
net/sunrpc/xprt.c +7 -0
@@ -2112,7 +2112,14 @@ static void xprt_destroy(struct rpc_xprt
 	 */
 	wait_on_bit_lock(&xprt->state, XPRT_LOCKED, TASK_UNINTERRUPTIBLE);
 
+	/*
+	 * xprt_schedule_autodisconnect() can run after XPRT_LOCKED
+	 * is cleared.  We use ->transport_lock to ensure the mod_timer()
+	 * can only run *before* del_time_sync(), never after.
+	 */
+	spin_lock(&xprt->transport_lock);
 	del_timer_sync(&xprt->timer);
+	spin_unlock(&xprt->transport_lock);
 
 	/*
 	 * Destroy sockets etc from the system workqueue so they can
author maintainer
#55 lore raw

PATCH 55/1126 SUNRPC: Do not dereference non-socket transports in sysfs

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

commit 421ab1be43bd015ffe744f4ea25df4f19d1ce6fe upstream.

Do not cast the struct xprt to a sock_xprt unless we know it is a UDP or TCP transport. Otherwise the call to lock the mutex will scribble over whatever structure is actually there. This has been seen to cause hard system lockups when the underlying transport was RDMA.

Fixes b49ea673e119 ("SUNRPC: lock against ->sock changing during sysfs read")
---
 include/linux/sunrpc/xprt.h     |    3 ++
 include/linux/sunrpc/xprtsock.h |    1 
 net/sunrpc/sysfs.c              |   55 +++++++++++++++++++---------------------
 net/sunrpc/xprtsock.c           |   26 +++++++++++++++++-
 4 files changed, 54 insertions(+), 31 deletions(-)
include/linux/sunrpc/xprt.h +3 -0
@@ -139,6 +139,9 @@ struct rpc_xprt_ops {
 	void		(*rpcbind)(struct rpc_task *task);
 	void		(*set_port)(struct rpc_xprt *xprt, unsigned short port);
 	void		(*connect)(struct rpc_xprt *xprt, struct rpc_task *task);
+	int		(*get_srcaddr)(struct rpc_xprt *xprt, char *buf,
+				       size_t buflen);
+	unsigned short	(*get_srcport)(struct rpc_xprt *xprt);
 	int		(*buf_alloc)(struct rpc_task *task);
 	void		(*buf_free)(struct rpc_task *task);
 	void		(*prepare_request)(struct rpc_rqst *req);
include/linux/sunrpc/xprtsock.h +0 -1
@@ -10,7 +10,6 @@
 
 int		init_socket_xprt(void);
 void		cleanup_socket_xprt(void);
-unsigned short	get_srcport(struct rpc_xprt *);
 
 #define RPC_MIN_RESVPORT	(1U)
 #define RPC_MAX_RESVPORT	(65535U)
net/sunrpc/sysfs.c +27 -28

102 lines not on this page · raw message

net/sunrpc/xprtsock.c +24 -2
@@ -1638,7 +1638,7 @@ static int xs_get_srcport(struct sock_xp
 	return port;
 }
 
-unsigned short get_srcport(struct rpc_xprt *xprt)
+static unsigned short xs_sock_srcport(struct rpc_xprt *xprt)
 {
 	struct sock_xprt *sock = container_of(xprt, struct sock_xprt, xprt);
 	unsigned short ret = 0;
@@ -1648,7 +1648,25 @@ unsigned short get_srcport(struct rpc_xp
 	mutex_unlock(&sock->recv_mutex);
 	return ret;
 }
-EXPORT_SYMBOL(get_srcport);
+
+static int xs_sock_srcaddr(struct rpc_xprt *xprt, char *buf, size_t buflen)
+{
+	struct sock_xprt *sock = container_of(xprt, struct sock_xprt, xprt);
+	union {
+		struct sockaddr sa;
+		struct sockaddr_storage st;
+	} saddr;
+	int ret = -ENOTCONN;
+
+	mutex_lock(&sock->recv_mutex);
+	if (sock->sock) {
+		ret = kernel_getsockname(sock->sock, &saddr.sa);
+		if (ret >= 0)
+			ret = snprintf(buf, buflen, "%pISc", &saddr.sa);
+	}
+	mutex_unlock(&sock->recv_mutex);
+	return ret;
+}
 
 static unsigned short xs_next_srcport(struct sock_xprt *transport, unsigned short port)
 {
@@ -2621,6 +2639,8 @@ static const struct rpc_xprt_ops xs_udp_
 	.rpcbind		= rpcb_getport_async,
 	.set_port		= xs_set_port,
 	.connect		= xs_connect,
+	.get_srcaddr		= xs_sock_srcaddr,
+	.get_srcport		= xs_sock_srcport,
 	.buf_alloc		= rpc_malloc,
 	.buf_free		= rpc_free,
 	.send_request		= xs_udp_send_request,
@@ -2643,6 +2663,8 @@ static const struct rpc_xprt_ops xs_tcp_
 	.rpcbind		= rpcb_getport_async,
 	.set_port		= xs_set_port,
 	.connect		= xs_connect,
+	.get_srcaddr		= xs_sock_srcaddr,
+	.get_srcport		= xs_sock_srcport,
 	.buf_alloc		= rpc_malloc,
 	.buf_free		= rpc_free,
 	.prepare_request	= xs_stream_prepare_request,
author maintainer
#56 lore raw

PATCH 56/1126 NFS: NFSv2/v3 clients should never be setting NFS_CAP_XATTR

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

commit b622ffe1d9ecbac71f0cddb52ff0831efdf8fb83 upstream.

Ensure that we always initialise the 'xattr_support' field in struct nfs_fsinfo, so that nfs_server_set_fsinfo() doesn't declare our NFSv2/v3 client to be capable of supporting the NFSv4.2 xattr protocol by setting the NFS_CAP_XATTR capability.

This configuration can cause nfs_do_access() to set access mode bits that are unsupported by the NFSv3 ACCESS call, which may confuse spec-compliant servers.

Fixes b78ef845c35d ("NFSv4.2: query the server for extended attribute support")
---
 fs/nfs/nfs3xdr.c |    1 +
 fs/nfs/proc.c    |    1 +
 2 files changed, 2 insertions(+)
fs/nfs/nfs3xdr.c +1 -0
@@ -2228,6 +2228,7 @@ static int decode_fsinfo3resok(struct xd
 	/* ignore properties */
 	result->lease_time = 0;
 	result->change_attr_type = NFS4_CHANGE_TYPE_IS_UNDEFINED;
+	result->xattr_support = 0;
 	return 0;
 }
 
fs/nfs/proc.c +1 -0
@@ -92,6 +92,7 @@ nfs_proc_get_root(struct nfs_server *ser
 	info->maxfilesize = 0x7FFFFFFF;
 	info->lease_time = 0;
 	info->change_attr_type = NFS4_CHANGE_TYPE_IS_UNDEFINED;
+	info->xattr_support = 0;
 	return 0;
 }
 
author maintainer
#57 lore raw

PATCH 57/1126 NFSD: prevent underflow in nfssvc_decode_writeargs()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 184416d4b98509fb4c3d8fc3d6dc1437896cc159 upstream.

Smatch complains:

	fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs()
	warn: no lower bound on 'args->len'

Change the type to unsigned to prevent this issue.

---
 fs/nfsd/nfsproc.c |    2 +-
 fs/nfsd/xdr.h     |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
fs/nfsd/nfsproc.c +1 -1
@@ -230,7 +230,7 @@ nfsd_proc_write(struct svc_rqst *rqstp)
 	unsigned long cnt = argp->len;
 	unsigned int nvecs;
 
-	dprintk("nfsd: WRITE    %s %d bytes at %d\n",
+	dprintk("nfsd: WRITE    %s %u bytes at %d\n",
 		SVCFH_fmt(&argp->fh),
 		argp->len, argp->offset);
 
fs/nfsd/xdr.h +1 -1
@@ -32,7 +32,7 @@ struct nfsd_readargs {
 struct nfsd_writeargs {
 	svc_fh			fh;
 	__u32			offset;
-	int			len;
+	__u32			len;
 	struct xdr_buf		payload;
 };
 
author maintainer
#58 lore raw

PATCH 58/1126 NFSD: prevent integer overflow on 32 bit systems

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit 23a9dbbe0faf124fc4c139615633b9d12a3a89ef upstream.

On a 32 bit system, the "len * sizeof(*p)" operation can have an integer overflow.

---
 include/linux/sunrpc/xdr.h |    2 ++
 1 file changed, 2 insertions(+)
include/linux/sunrpc/xdr.h +2 -0
@@ -731,6 +731,8 @@ xdr_stream_decode_uint32_array(struct xd
 
 	if (unlikely(xdr_stream_decode_u32(xdr, &len) < 0))
 		return -EBADMSG;
+	if (len > SIZE_MAX / sizeof(*p))
+		return -EBADMSG;
 	p = xdr_inline_decode(xdr, len * sizeof(*p));
 	if (unlikely(!p))
 		return -EBADMSG;
author maintainer
#59 lore raw

PATCH 59/1126 f2fs: fix to unlock page correctly in error path of is_alive()

In reply to Greg Kroah-Hartman

From: Chao Yu <[email protected]>

commit 6d18762ed5cd549fde74fd0e05d4d87bac5a3beb upstream.

As Pavel Machek reported in below link [1]:

After commit 77900c45ee5c ("f2fs: fix to do sanity check in is_alive()"), node page should be unlock via calling f2fs_put_page() in the error path of is_alive(), otherwise, f2fs may hang when it tries to lock the node page, fix it.

[1] https://lore.kernel.org/stable/[email protected]/

Fixes 77900c45ee5c ("f2fs: fix to do sanity check in is_alive()")
---
 fs/f2fs/gc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/f2fs/gc.c +3 -1
@@ -1038,8 +1038,10 @@ static bool is_alive(struct f2fs_sb_info
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
 	}
 
-	if (f2fs_check_nid_range(sbi, dni->ino))
+	if (f2fs_check_nid_range(sbi, dni->ino)) {
+		f2fs_put_page(node_page, 1);
 		return false;
+	}
 
 	*nofs = ofs_of_node(node_page);
 	source_blkaddr = data_blkaddr(NULL, node_page, ofs_in_node);
author maintainer
#60 lore raw

PATCH 60/1126 f2fs: quota: fix loop condition at f2fs_quota_sync()

In reply to Greg Kroah-Hartman

From: Juhyung Park <[email protected]>

commit 680af5b824a52faa819167628665804a14f0e0df upstream.

cnt should be passed to sb_has_quota_active() instead of type to check active quota properly.

Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]):

[    2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[    2.796024] Mem abort info:
[    2.796025]   ESR = 0x96000005
[    2.796028]   EC = 0x25: DABT (current EL), IL = 32 bits
[    2.796029]   SET = 0, FnV = 0
[    2.796031]   EA = 0, S1PTW = 0
[    2.796032] Data abort info:
[    2.796034]   ISV = 0, ISS = 0x00000005
[    2.796035]   CM = 0, WnR = 0
[    2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000
[    2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000
[    2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[    2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S                5.4.179-arter97-r8-64666-g2f16e087f9d8 #1
[    2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT)
[    2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO)
[    2.796065] pc : down_write+0x28/0x70
[    2.796070] lr : f2fs_quota_sync+0x100/0x294
[    2.796071] sp : ffffffa3f48ffc30
[    2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000
[    2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80
[    2.796077] x25: ffffffa3f7290048 x24: 0000000000000001
[    2.796078] x23: 0000000000000000 x22: ffffffa3f7290000
[    2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110
[    2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038
[    2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0
[    2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0
[    2.796086] x13: 00000000000004f6 x12: 00162c44ff493000
[    2.796088] x11: 0000000000000400 x10: ffffffa40e38c948
[    2.796090] x9 : 0000000000000000 x8 : 00000000000000a0
[    2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a
[    2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d
[    2.796094] x3 : 00000000060c0000 x2 : 0000000000000001
[    2.796096] x1 : 0000000000000000 x0 : 00000000000000a0
[    2.796098] Call trace:
[    2.796100]  down_write+0x28/0x70
[    2.796102]  f2fs_quota_sync+0x100/0x294
[    2.796104]  block_operations+0x120/0x204
[    2.796106]  f2fs_write_checkpoint+0x11c/0x520
[    2.796107]  __checkpoint_and_complete_reqs+0x7c/0xd34
[    2.796109]  issue_checkpoint_thread+0x6c/0xb8
[    2.796112]  kthread+0x138/0x414
[    2.796114]  ret_from_fork+0x10/0x18
[    2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02)
[    2.796120] ---[ end trace 96e942e8eb6a0b53 ]---
[    2.800116] Kernel panic - not syncing: Fatal exception
[    2.800120] SMP: stopping secondary CPUs
Fixes 9de71ede81e6 ("f2fs: quota: fix potential deadlock")
Cc <[email protected]> # v5.15+
---
 fs/f2fs/super.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
fs/f2fs/super.c +3 -3
@@ -2688,7 +2688,7 @@ int f2fs_quota_sync(struct super_block *
 	struct f2fs_sb_info *sbi = F2FS_SB(sb);
 	struct quota_info *dqopt = sb_dqopt(sb);
 	int cnt;
-	int ret;
+	int ret = 0;
 
 	/*
 	 * Now when everything is written we can discard the pagecache so
@@ -2699,8 +2699,8 @@ int f2fs_quota_sync(struct super_block *
 		if (type != -1 && cnt != type)
 			continue;
 
-		if (!sb_has_quota_active(sb, type))
-			return 0;
+		if (!sb_has_quota_active(sb, cnt))
+			continue;
 
 		inode_lock(dqopt->files[cnt]);
 
author maintainer
#61 lore raw

PATCH 61/1126 f2fs: fix to do sanity check on .cp_pack_total_block_count

In reply to Greg Kroah-Hartman

From: Chao Yu <[email protected]>

commit 5b5b4f85b01604389f7a0f11ef180a725bf0e2d4 upstream.

As bughunter reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=215709

f2fs may hang when mounting a fuzzed image, the dmesg shows as below:

__filemap_get_folio+0x3a9/0x590
pagecache_get_page+0x18/0x60
__get_meta_page+0x95/0x460 [f2fs]
get_checkpoint_version+0x2a/0x1e0 [f2fs]
validate_checkpoint+0x8e/0x2a0 [f2fs]
f2fs_get_valid_checkpoint+0xd0/0x620 [f2fs]
f2fs_fill_super+0xc01/0x1d40 [f2fs]
mount_bdev+0x18a/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
legacy_get_tree+0x28/0x50
vfs_get_tree+0x27/0xc0
path_mount+0x480/0xaa0
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae

The root cause is cp_pack_total_block_count field in checkpoint was fuzzed to one, as calcuated, two cp pack block locates in the same block address, so then read latter cp pack block, it will block on the page lock due to the lock has already held when reading previous cp pack block, fix it by adding sanity check for cp_pack_total_block_count.

---
 fs/f2fs/checkpoint.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
fs/f2fs/checkpoint.c +5 -3
@@ -864,6 +864,7 @@ static struct page *validate_checkpoint(
 	struct page *cp_page_1 = NULL, *cp_page_2 = NULL;
 	struct f2fs_checkpoint *cp_block = NULL;
 	unsigned long long cur_version = 0, pre_version = 0;
+	unsigned int cp_blocks;
 	int err;
 
 	err = get_checkpoint_version(sbi, cp_addr, &cp_block,
@@ -871,15 +872,16 @@ static struct page *validate_checkpoint(
 	if (err)
 		return NULL;
 
-	if (le32_to_cpu(cp_block->cp_pack_total_block_count) >
-					sbi->blocks_per_seg) {
+	cp_blocks = le32_to_cpu(cp_block->cp_pack_total_block_count);
+
+	if (cp_blocks > sbi->blocks_per_seg || cp_blocks <= F2FS_CP_PACKS) {
 		f2fs_warn(sbi, "invalid cp_pack_total_block_count:%u",
 			  le32_to_cpu(cp_block->cp_pack_total_block_count));
 		goto invalid_cp;
 	}
 	pre_version = *version;
 
-	cp_addr += le32_to_cpu(cp_block->cp_pack_total_block_count) - 1;
+	cp_addr += cp_blocks - 1;
 	err = get_checkpoint_version(sbi, cp_addr, &cp_block,
 					&cp_page_2, version);
 	if (err)
author maintainer
#62 lore raw

PATCH 62/1126 remoteproc: Fix count check in rproc_coredump_write()

In reply to Greg Kroah-Hartman

From: Alistair Delva <[email protected]>

commit f89672cc3681952f2d06314981a6b45f8b0045d1 upstream.

Check count for 0, to avoid a potential underflow. Make the check the same as the one in rproc_recovery_write().

Fixes 3afdc59e4390 ("remoteproc: Add coredump debugfs entry")
Cc Rishabh Bhatnagar <[email protected]>
Cc Ohad Ben-Cohen <[email protected]>
Cc Bjorn Andersson <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Sibi Sankar <[email protected]>
---
 drivers/remoteproc/remoteproc_debugfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/remoteproc/remoteproc_debugfs.c +1 -1
@@ -76,7 +76,7 @@ static ssize_t rproc_coredump_write(stru
 	int ret, err = 0;
 	char buf[20];
 
-	if (count > sizeof(buf))
+	if (count < 1 || count > sizeof(buf))
 		return -EINVAL;
 
 	ret = copy_from_user(buf, user_buf, count);
author maintainer
#63 lore raw

PATCH 63/1126 mm/mlock: fix two bugs in user_shm_lock()

In reply to Greg Kroah-Hartman

From: Miaohe Lin <[email protected]>

commit e97824ff663ce3509fe040431c713182c2f058b1 upstream.

user_shm_lock forgets to set allowed to 0 when get_ucounts fails. So the later user_shm_unlock might do the extra dec_rlimit_ucounts. Also in the RLIM_INFINITY case, user_shm_lock will success regardless of the value of memlock where memblock == LONG_MAX && !capable(CAP_IPC_LOCK) should fail. Fix all of these by changing the code to leave lock_limit at ULONG_MAX aka RLIM_INFINITY, leave "allowed" initialized to 0 and remove the special case of RLIM_INFINITY as nothing can be greater than ULONG_MAX.

Credit goes to Eric W. Biederman for proposing simplifying the code and thus catching the later bug.

Fixes d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts")

v1: https://lkml.kernel.org/r/[email protected]
v2: https://lkml.kernel.org/r/[email protected]

---
 mm/mlock.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
mm/mlock.c +3 -4
@@ -827,13 +827,12 @@ int user_shm_lock(size_t size, struct uc
 
 	locked = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	lock_limit = rlimit(RLIMIT_MEMLOCK);
-	if (lock_limit == RLIM_INFINITY)
-		allowed = 1;
-	lock_limit >>= PAGE_SHIFT;
+	if (lock_limit != RLIM_INFINITY)
+		lock_limit >>= PAGE_SHIFT;
 	spin_lock(&shmlock_user_lock);
 	memlock = inc_rlimit_ucounts(ucounts, UCOUNT_RLIMIT_MEMLOCK, locked);
 
-	if (!allowed && (memlock == LONG_MAX || memlock > lock_limit) && !capable(CAP_IPC_LOCK)) {
+	if ((memlock == LONG_MAX || memlock > lock_limit) && !capable(CAP_IPC_LOCK)) {
 		dec_rlimit_ucounts(ucounts, UCOUNT_RLIMIT_MEMLOCK, locked);
 		goto out;
 	}
author maintainer
#64 lore raw

PATCH 64/1126 pinctrl: ingenic: Fix regmap on X series SoCs

In reply to Greg Kroah-Hartman

From: Aidan MacDonald <[email protected]>

commit 9279c00fa40250e5cb23a8423dce7dbc6516a0ea upstream.

The X series Ingenic SoCs have a shadow GPIO group which is at a higher offset than the other groups, and is used for all GPIO configuration. The regmap did not take this offset into account and set max_register too low, so the regmap API blocked writes to the shadow group, which made the pinctrl driver unable to configure any pins.

Fix this by adding regmap access tables to the chip info. The way that max_register was computed was also off by one, since max_register is an inclusive bound, not an exclusive bound; this has been fixed.

---
 drivers/pinctrl/pinctrl-ingenic.c |   46 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)
drivers/pinctrl/pinctrl-ingenic.c +45 -1
@@ -119,6 +119,8 @@ struct ingenic_chip_info {
 	unsigned int num_functions;
 
 	const u32 *pull_ups, *pull_downs;
+
+	const struct regmap_access_table *access_table;
 };
 
 struct ingenic_pinctrl {
@@ -2179,6 +2181,17 @@ static const struct function_desc x1000_
 	{ "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
 };
 
+static const struct regmap_range x1000_access_ranges[] = {
+	regmap_reg_range(0x000, 0x400 - 4),
+	regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X1500 */
+static const struct regmap_access_table x1000_access_table = {
+	.yes_ranges = x1000_access_ranges,
+	.n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
+};
+
 static const struct ingenic_chip_info x1000_chip_info = {
 	.num_chips = 4,
 	.reg_offset = 0x100,
@@ -2189,6 +2202,7 @@ static const struct ingenic_chip_info x1
 	.num_functions = ARRAY_SIZE(x1000_functions),
 	.pull_ups = x1000_pull_ups,
 	.pull_downs = x1000_pull_downs,
+	.access_table = &x1000_access_table,
 };
 
 static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
@@ -2300,6 +2314,7 @@ static const struct ingenic_chip_info x1
 	.num_functions = ARRAY_SIZE(x1500_functions),
 	.pull_ups = x1000_pull_ups,
 	.pull_downs = x1000_pull_downs,
+	.access_table = &x1000_access_table,
 };
 
 static const u32 x1830_pull_ups[4] = {
@@ -2506,6 +2521,16 @@ static const struct function_desc x1830_
 	{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
 };
 
+static const struct regmap_range x1830_access_ranges[] = {
+	regmap_reg_range(0x0000, 0x4000 - 4),
+	regmap_reg_range(0x7000, 0x8000 - 4),
+};
+
+static const struct regmap_access_table x1830_access_table = {
+	.yes_ranges = x1830_access_ranges,
+	.n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
+};
+
 static const struct ingenic_chip_info x1830_chip_info = {
 	.num_chips = 4,
 	.reg_offset = 0x1000,
@@ -2516,6 +2541,7 @@ static const struct ingenic_chip_info x1
 	.num_functions = ARRAY_SIZE(x1830_functions),
 	.pull_ups = x1830_pull_ups,
 	.pull_downs = x1830_pull_downs,
+	.access_table = &x1830_access_table,
 };
 
 static const u32 x2000_pull_ups[5] = {
@@ -2969,6 +2995,17 @@ static const struct function_desc x2000_
 	{ "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
 };
 
+static const struct regmap_range x2000_access_ranges[] = {
+	regmap_reg_range(0x000, 0x500 - 4),
+	regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X2100 */
+static const struct regmap_access_table x2000_access_table = {
+	.yes_ranges = x2000_access_ranges,
+	.n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
+};
+
 static const struct ingenic_chip_info x2000_chip_info = {
 	.num_chips = 5,
 	.reg_offset = 0x100,
@@ -2979,6 +3016,7 @@ static const struct ingenic_chip_info x2
 	.num_functions = ARRAY_SIZE(x2000_functions),
 	.pull_ups = x2000_pull_ups,
 	.pull_downs = x2000_pull_downs,
+	.access_table = &x2000_access_table,
 };
 
 static const u32 x2100_pull_ups[5] = {
@@ -3189,6 +3227,7 @@ static const struct ingenic_chip_info x2
 	.num_functions = ARRAY_SIZE(x2100_functions),
 	.pull_ups = x2100_pull_ups,
 	.pull_downs = x2100_pull_downs,
+	.access_table = &x2000_access_table,
 };
 
 static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
@@ -4168,7 +4207,12 @@ static int __init ingenic_pinctrl_probe(
 		return PTR_ERR(base);
 
 	regmap_config = ingenic_pinctrl_regmap_config;
-	regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
+	if (chip_info->access_table) {
+		regmap_config.rd_table = chip_info->access_table;
+		regmap_config.wr_table = chip_info->access_table;
+	} else {
+		regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset - 4;
+	}
 
 	jzpc->map = devm_regmap_init_mmio(dev, base, &regmap_config);
 	if (IS_ERR(jzpc->map)) {
author maintainer
#65 lore raw

PATCH 65/1126 pinctrl: samsung: drop pin banks references on error paths

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

commit 50ebd19e3585b9792e994cfa8cbee8947fe06371 upstream.

The driver iterates over its devicetree children with for_each_child_of_node() and stores for later found node pointer. This has to be put in error paths to avoid leak during re-probing.

---
 drivers/pinctrl/samsung/pinctrl-samsung.c |   30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)
drivers/pinctrl/samsung/pinctrl-samsung.c +23 -7
@@ -1002,6 +1002,16 @@ samsung_pinctrl_get_soc_data_for_of_alia
 	return &(of_data->ctrl[id]);
 }
 
+static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
+{
+	struct samsung_pin_bank *bank;
+	unsigned int i;
+
+	bank = d->pin_banks;
+	for (i = 0; i < d->nr_banks; ++i, ++bank)
+		of_node_put(bank->of_node);
+}
+
 /* retrieve the soc specific data */
 static const struct samsung_pin_ctrl *
 samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
@@ -1117,19 +1127,19 @@ static int samsung_pinctrl_probe(struct
 	if (ctrl->retention_data) {
 		drvdata->retention_ctrl = ctrl->retention_data->init(drvdata,
 							  ctrl->retention_data);
-		if (IS_ERR(drvdata->retention_ctrl))
-			return PTR_ERR(drvdata->retention_ctrl);
+		if (IS_ERR(drvdata->retention_ctrl)) {
+			ret = PTR_ERR(drvdata->retention_ctrl);
+			goto err_put_banks;
+		}
 	}
 
 	ret = samsung_pinctrl_register(pdev, drvdata);
 	if (ret)
-		return ret;
+		goto err_put_banks;
 
 	ret = samsung_gpiolib_register(pdev, drvdata);
-	if (ret) {
-		samsung_pinctrl_unregister(pdev, drvdata);
-		return ret;
-	}
+	if (ret)
+		goto err_unregister;
 
 	if (ctrl->eint_gpio_init)
 		ctrl->eint_gpio_init(drvdata);
@@ -1139,6 +1149,12 @@ static int samsung_pinctrl_probe(struct
 	platform_set_drvdata(pdev, drvdata);
 
 	return 0;
+
+err_unregister:
+	samsung_pinctrl_unregister(pdev, drvdata);
+err_put_banks:
+	samsung_banks_of_node_put(drvdata);
+	return ret;
 }
 
 /*
author maintainer
#66 lore raw

PATCH 66/1126 net: bnxt_ptp: fix compilation error

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

commit dcf500065fabe27676dfe7b4ba521a4f1e0fc8ac upstream.

The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when CONFIG_WERROR is enabled. The following error is generated:

drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array subscript 255 is above array bounds of ‘struct pps_pin[4]’ [-Werror=array-bounds]

  400 |  ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL;
      |  ~~~~~~~~~~~~~~~~~~^~~~~~~~

In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while referencing ‘pins’
75 | struct pps_pin pins[BNXT_MAX_TSIO_PINS];
| ^~~~
cc1: all warnings being treated as errors

This is due to the function ptp_find_pin() returning a pin ID of -1 when a valid pin is not found and this error never being checked. Change the TSIO_PIN_VALID() function to also check that a pin ID is not negative and use this macro in bnxt_ptp_enable() to check the result of the calls to ptp_find_pin() to return an error early for invalid pins. This fixes the compilation error.

---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c |    6 +++++-
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h |    2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c +5 -1
@@ -329,7 +329,7 @@ static int bnxt_ptp_enable(struct ptp_cl
 	struct bnxt_ptp_cfg *ptp = container_of(ptp_info, struct bnxt_ptp_cfg,
 						ptp_info);
 	struct bnxt *bp = ptp->bp;
-	u8 pin_id;
+	int pin_id;
 	int rc;
 
 	switch (rq->type) {
@@ -337,6 +337,8 @@ static int bnxt_ptp_enable(struct ptp_cl
 		/* Configure an External PPS IN */
 		pin_id = ptp_find_pin(ptp->ptp_clock, PTP_PF_EXTTS,
 				      rq->extts.index);
+		if (!TSIO_PIN_VALID(pin_id))
+			return -EOPNOTSUPP;
 		if (!on)
 			break;
 		rc = bnxt_ptp_cfg_pin(bp, pin_id, BNXT_PPS_PIN_PPS_IN);
@@ -350,6 +352,8 @@ static int bnxt_ptp_enable(struct ptp_cl
 		/* Configure a Periodic PPS OUT */
 		pin_id = ptp_find_pin(ptp->ptp_clock, PTP_PF_PEROUT,
 				      rq->perout.index);
+		if (!TSIO_PIN_VALID(pin_id))
+			return -EOPNOTSUPP;
 		if (!on)
 			break;
 
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h +1 -1
@@ -31,7 +31,7 @@ struct pps_pin {
 	u8 state;
 };
 
-#define TSIO_PIN_VALID(pin) ((pin) < (BNXT_MAX_TSIO_PINS))
+#define TSIO_PIN_VALID(pin) ((pin) >= 0 && (pin) < (BNXT_MAX_TSIO_PINS))
 
 #define EVENT_DATA2_PPS_EVENT_TYPE(data2)				\
 	((data2) & ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE)
author maintainer
#67 lore raw

PATCH 67/1126 spi: mxic: Fix the transmit path

In reply to Greg Kroah-Hartman

From: Miquel Raynal <[email protected]>

commit 5fd6739e0df7e320bcac103dfb95fe75941fea17 upstream.

By working with external hardware ECC engines, we figured out that Under certain circumstances, it is needed for the SPI controller to check INT_TX_EMPTY and INT_RX_NOT_EMPTY in both receive and transmit path (not only in the receive path). The delay penalty being negligible, move this code in the common path.

---
 drivers/spi/spi-mxic.c |   26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)
drivers/spi/spi-mxic.c +11 -15
@@ -304,25 +304,21 @@ static int mxic_spi_data_xfer(struct mxi
 
 		writel(data, mxic->regs + TXD(nbytes % 4));
 
-		if (rxbuf) {
-			ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
-						 sts & INT_TX_EMPTY, 0,
-						 USEC_PER_SEC);
-			if (ret)
-				return ret;
+		ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+					 sts & INT_TX_EMPTY, 0, USEC_PER_SEC);
+		if (ret)
+			return ret;
 
-			ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
-						 sts & INT_RX_NOT_EMPTY, 0,
-						 USEC_PER_SEC);
-			if (ret)
-				return ret;
+		ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+					 sts & INT_RX_NOT_EMPTY, 0,
+					 USEC_PER_SEC);
+		if (ret)
+			return ret;
 
-			data = readl(mxic->regs + RXD);
+		data = readl(mxic->regs + RXD);
+		if (rxbuf) {
 			data >>= (8 * (4 - nbytes));
 			memcpy(rxbuf + pos, &data, nbytes);
-			WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
-		} else {
-			readl(mxic->regs + RXD);
 		}
 		WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
 
author maintainer
#68 lore raw

PATCH 68/1126 mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

In reply to Greg Kroah-Hartman

From: Tudor Ambarus <[email protected]>

commit 151c6b49d679872d6fc0b50e0ad96303091694a2 upstream.

Even if SPI_NOR_NO_ERASE was set, one could still send erase opcodes to the flash. It is not recommended to send unsupported opcodes to flashes. Fix the logic and do not set mtd->_erase when SPI_NOR_NO_ERASE is specified. With this users will not be able to issue erase opcodes to flashes and instead they will recive an -ENOTSUPP error.

---
 drivers/mtd/spi-nor/core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mtd/spi-nor/core.c +2 -1
@@ -3181,10 +3181,11 @@ static void spi_nor_set_mtd_info(struct
 	mtd->flags = MTD_CAP_NORFLASH;
 	if (nor->info->flags & SPI_NOR_NO_ERASE)
 		mtd->flags |= MTD_NO_ERASE;
+	else
+		mtd->_erase = spi_nor_erase;
 	mtd->writesize = nor->params->writesize;
 	mtd->writebufsize = nor->params->page_size;
 	mtd->size = nor->params->size;
-	mtd->_erase = spi_nor_erase;
 	mtd->_read = spi_nor_read;
 	/* Might be already set by some SST flashes. */
 	if (!mtd->_write)
author maintainer
#69 lore raw

PATCH 69/1126 mtd: rawnand: protect access to rawnand devices while in suspend

In reply to Greg Kroah-Hartman

From: Sean Nyekjaer <[email protected]>

commit 8cba323437a49a45756d661f500b324fc2d486fe upstream.

Prevent rawnand access while in a suspended state.

Commit 013e6292aaf5 ("mtd: rawnand: Simplify the locking") allows the rawnand layer to return errors rather than waiting in a blocking wait.

Tested on a iMX6ULL.

---
 drivers/mtd/nand/raw/nand_base.c |   44 +++++++++++++++++----------------------
 include/linux/mtd/rawnand.h      |    2 +
 2 files changed, 22 insertions(+), 24 deletions(-)
drivers/mtd/nand/raw/nand_base.c +20 -24
@@ -338,16 +338,19 @@ static int nand_isbad_bbm(struct nand_ch
  *
  * Return: -EBUSY if the chip has been suspended, 0 otherwise
  */
-static int nand_get_device(struct nand_chip *chip)
+static void nand_get_device(struct nand_chip *chip)
 {
-	mutex_lock(&chip->lock);
-	if (chip->suspended) {
+	/* Wait until the device is resumed. */
+	while (1) {
+		mutex_lock(&chip->lock);
+		if (!chip->suspended) {
+			mutex_lock(&chip->controller->lock);
+			return;
+		}
 		mutex_unlock(&chip->lock);
-		return -EBUSY;
-	}
-	mutex_lock(&chip->controller->lock);
 
-	return 0;
+		wait_event(chip->resume_wq, !chip->suspended);
+	}
 }
 
 /**
@@ -576,9 +579,7 @@ static int nand_block_markbad_lowlevel(s
 		nand_erase_nand(chip, &einfo, 0);
 
 		/* Write bad block marker to OOB */
-		ret = nand_get_device(chip);
-		if (ret)
-			return ret;
+		nand_get_device(chip);
 
 		ret = nand_markbad_bbm(chip, ofs);
 		nand_release_device(chip);
@@ -3826,9 +3827,7 @@ static int nand_read_oob(struct mtd_info
 	    ops->mode != MTD_OPS_RAW)
 		return -ENOTSUPP;
 
-	ret = nand_get_device(chip);
-	if (ret)
-		return ret;
+	nand_get_device(chip);
 
 	if (!ops->datbuf)
 		ret = nand_do_read_oob(chip, from, ops);
@@ -4415,13 +4414,11 @@ static int nand_write_oob(struct mtd_inf
 			  struct mtd_oob_ops *ops)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
-	int ret;
+	int ret = 0;
 
 	ops->retlen = 0;
 
-	ret = nand_get_device(chip);
-	if (ret)
-		return ret;
+	nand_get_device(chip);
 
 	switch (ops->mode) {
 	case MTD_OPS_PLACE_OOB:
@@ -4481,9 +4478,7 @@ int nand_erase_nand(struct nand_chip *ch
 		return -EIO;
 
 	/* Grab the lock and see if the device is available */
-	ret = nand_get_device(chip);
-	if (ret)
-		return ret;
+	nand_get_device(chip);
 
 	/* Shift to get first page */
 	page = (int)(instr->addr >> chip->page_shift);
@@ -4570,7 +4565,7 @@ static void nand_sync(struct mtd_info *m
 	pr_debug("%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
-	WARN_ON(nand_get_device(chip));
+	nand_get_device(chip);
 	/* Release it and go back */
 	nand_release_device(chip);
 }
@@ -4587,9 +4582,7 @@ static int nand_block_isbad(struct mtd_i
 	int ret;
 
 	/* Select the NAND device */
-	ret = nand_get_device(chip);
-	if (ret)
-		return ret;
+	nand_get_device(chip);
 
 	nand_select_target(chip, chipnr);
 
@@ -4660,6 +4653,8 @@ static void nand_resume(struct mtd_info
 			__func__);
 	}
 	mutex_unlock(&chip->lock);
+
+	wake_up_all(&chip->resume_wq);
 }
 
 /**
@@ -5437,6 +5432,7 @@ static int nand_scan_ident(struct nand_c
 	chip->cur_cs = -1;
 
 	mutex_init(&chip->lock);
+	init_waitqueue_head(&chip->resume_wq);
 
 	/* Enforce the right timings for reset/detection */
 	chip->current_interface_config = nand_get_reset_interface_config();
include/linux/mtd/rawnand.h +2 -0
@@ -1240,6 +1240,7 @@ struct nand_secure_region {
  * @lock: Lock protecting the suspended field. Also used to serialize accesses
  *        to the NAND device
  * @suspended: Set to 1 when the device is suspended, 0 when it's not
+ * @resume_wq: wait queue to sleep if rawnand is in suspended state.
  * @cur_cs: Currently selected target. -1 means no target selected, otherwise we
  *          should always have cur_cs >= 0 && cur_cs < nanddev_ntargets().
  *          NAND Controller drivers should not modify this value, but they're
@@ -1294,6 +1295,7 @@ struct nand_chip {
 	/* Internals */
 	struct mutex lock;
 	unsigned int suspended : 1;
+	wait_queue_head_t resume_wq;
 	int cur_cs;
 	int read_retries;
 	struct nand_secure_region *secure_regions;
author maintainer
#70 lore raw

PATCH 70/1126 can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path

In reply to Greg Kroah-Hartman

From: Hangyu Hua <[email protected]>

commit c70222752228a62135cee3409dccefd494a24646 upstream.

There is no need to call dev_kfree_skb() when usb_submit_urb() fails beacause can_put_echo_skb() deletes the original skb and can_free_echo_skb() deletes the cloned skb.

Fixes 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc Sebastian Haas <[email protected]>
---
 drivers/net/can/usb/ems_usb.c |    1 -
 1 file changed, 1 deletion(-)
drivers/net/can/usb/ems_usb.c +0 -1
@@ -819,7 +819,6 @@ static netdev_tx_t ems_usb_start_xmit(st
 
 		usb_unanchor_urb(urb);
 		usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
-		dev_kfree_skb(skb);
 
 		atomic_dec(&dev->active_tx_urbs);
 
author maintainer
#71 lore raw

PATCH 71/1126 can: m_can: m_can_tx_handler(): fix use after free of skb

In reply to Greg Kroah-Hartman

From: Marc Kleine-Budde <[email protected]>

commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream.

can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

---
 drivers/net/can/m_can/m_can.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/can/m_can/m_can.c +3 -2
@@ -1637,8 +1637,6 @@ static netdev_tx_t m_can_tx_handler(stru
 		if (err)
 			goto out_fail;
 
-		can_put_echo_skb(skb, dev, 0, 0);
-
 		if (cdev->can.ctrlmode & CAN_CTRLMODE_FD) {
 			cccr = m_can_read(cdev, M_CAN_CCCR);
 			cccr &= ~CCCR_CMR_MASK;
@@ -1655,6 +1653,9 @@ static netdev_tx_t m_can_tx_handler(stru
 			m_can_write(cdev, M_CAN_CCCR, cccr);
 		}
 		m_can_write(cdev, M_CAN_TXBTIE, 0x1);
+
+		can_put_echo_skb(skb, dev, 0, 0);
+
 		m_can_write(cdev, M_CAN_TXBAR, 0x1);
 		/* End of xmit function for version 3.0.x */
 	} else {
author maintainer
#72 lore raw

PATCH 72/1126 can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path

In reply to Greg Kroah-Hartman

From: Hangyu Hua <[email protected]>

commit 3d3925ff6433f98992685a9679613a2cc97f3ce2 upstream.

There is no need to call dev_kfree_skb() when usb_submit_urb() fails because can_put_echo_skb() deletes original skb and can_free_echo_skb() deletes the cloned skb.

Fixes 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
---
 drivers/net/can/usb/usb_8dev.c |   30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)
drivers/net/can/usb/usb_8dev.c +14 -16
@@ -663,9 +663,20 @@ static netdev_tx_t usb_8dev_start_xmit(s
 	atomic_inc(&priv->active_tx_urbs);
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (unlikely(err))
-		goto failed;
-	else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
+	if (unlikely(err)) {
+		can_free_echo_skb(netdev, context->echo_index, NULL);
+
+		usb_unanchor_urb(urb);
+		usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
+
+		atomic_dec(&priv->active_tx_urbs);
+
+		if (err == -ENODEV)
+			netif_device_detach(netdev);
+		else
+			netdev_warn(netdev, "failed tx_urb %d\n", err);
+		stats->tx_dropped++;
+	} else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
 		/* Slow down tx path */
 		netif_stop_queue(netdev);
 
@@ -684,19 +695,6 @@ nofreecontext:
 
 	return NETDEV_TX_BUSY;
 
-failed:
-	can_free_echo_skb(netdev, context->echo_index, NULL);
-
-	usb_unanchor_urb(urb);
-	usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
-
-	atomic_dec(&priv->active_tx_urbs);
-
-	if (err == -ENODEV)
-		netif_device_detach(netdev);
-	else
-		netdev_warn(netdev, "failed tx_urb %d\n", err);
-
 nomembuf:
 	usb_free_urb(urb);
 
author maintainer
#73 lore raw

PATCH 73/1126 jffs2: fix use-after-free in jffs2_clear_xattr_subsystem

In reply to Greg Kroah-Hartman

From: Baokun Li <[email protected]>

commit 4c7c44ee1650677fbe89d86edbad9497b7679b5c upstream.

When we mount a jffs2 image, assume that the first few blocks of the image are normal and contain at least one xattr-related inode, but the next block is abnormal. As a result, an error is returned in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then called in jffs2_build_filesystem() and then again in jffs2_do_fill_super().

Finally we can observe the following report:
==================================================================

 BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac
 Read of size 8 at addr ffff8881243384e0 by task mount/719

 Call Trace:
  dump_stack+0x115/0x16b
  jffs2_clear_xattr_subsystem+0x95/0x6ac
  jffs2_do_fill_super+0x84f/0xc30
  jffs2_fill_super+0x2ea/0x4c0
  mtd_get_sb+0x254/0x400
  mtd_get_sb_by_nr+0x4f/0xd0
  get_tree_mtd+0x498/0x840
  jffs2_get_tree+0x25/0x30
  vfs_get_tree+0x8d/0x2e0
  path_mount+0x50f/0x1e50
  do_mount+0x107/0x130
  __se_sys_mount+0x1c5/0x2f0
  __x64_sys_mount+0xc7/0x160
  do_syscall_64+0x45/0x70
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

 Allocated by task 719:
  kasan_save_stack+0x23/0x60
  __kasan_kmalloc.constprop.0+0x10b/0x120
  kasan_slab_alloc+0x12/0x20
  kmem_cache_alloc+0x1c0/0x870
  jffs2_alloc_xattr_ref+0x2f/0xa0
  jffs2_scan_medium.cold+0x3713/0x4794
  jffs2_do_mount_fs.cold+0xa7/0x2253
  jffs2_do_fill_super+0x383/0xc30
  jffs2_fill_super+0x2ea/0x4c0
 [...]

 Freed by task 719:
  kmem_cache_free+0xcc/0x7b0
  jffs2_free_xattr_ref+0x78/0x98
  jffs2_clear_xattr_subsystem+0xa1/0x6ac
  jffs2_do_mount_fs.cold+0x5e6/0x2253
  jffs2_do_fill_super+0x383/0xc30
  jffs2_fill_super+0x2ea/0x4c0
 [...]

 The buggy address belongs to the object at ffff8881243384b8
  which belongs to the cache jffs2_xattr_ref of size 48
 The buggy address is located 40 bytes inside of
  48-byte region [ffff8881243384b8, ffff8881243384e8)
 [...]
 ==================================================================

The triggering of the BUG is shown in the following stack:
-----------------------------------------------------------
jffs2_fill_super
jffs2_do_fill_super
jffs2_do_mount_fs
jffs2_build_filesystem
jffs2_scan_medium
jffs2_scan_eraseblock <--- ERROR
jffs2_clear_xattr_subsystem <--- free
jffs2_clear_xattr_subsystem <--- free again
-----------------------------------------------------------

An error is returned in jffs2_do_mount_fs(). If the error is returned by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to be executed. If the error is returned by jffs2_build_filesystem(), the jffs2_clear_xattr_subsystem() also does not need to be executed again. So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root' to fix this UAF problem.

Fixes aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
---
 fs/jffs2/fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/jffs2/fs.c +1 -1
@@ -603,8 +603,8 @@ out_root:
 	jffs2_free_ino_caches(c);
 	jffs2_free_raw_node_refs(c);
 	kvfree(c->blocks);
- out_inohash:
 	jffs2_clear_xattr_subsystem(c);
+ out_inohash:
 	kfree(c->inocache_list);
  out_wbuf:
 	jffs2_flash_cleanup(c);
author maintainer
#74 lore raw

PATCH 74/1126 jffs2: fix memory leak in jffs2_do_mount_fs

In reply to Greg Kroah-Hartman

From: Baokun Li <[email protected]>

commit d051cef784de4d54835f6b6836d98a8f6935772c upstream.

If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error, we can observe the following kmemleak report:

--------------------------------------------
unreferenced object 0xffff88811b25a640 (size 64):
comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880
    [<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130
    [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
    [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
    [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
    [...]

unreferenced object 0xffff88812c760000 (size 65536):
comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes):
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
backtrace:

    [<ffffffffa493a449>] __kmalloc+0x6b9/0x910
    [<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130
    [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
    [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
    [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
    [...]
--------------------------------------------

This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem.

Fixes e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
---
 fs/jffs2/build.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/jffs2/build.c +3 -1
@@ -415,13 +415,15 @@ int jffs2_do_mount_fs(struct jffs2_sb_in
 		jffs2_free_ino_caches(c);
 		jffs2_free_raw_node_refs(c);
 		ret = -EIO;
-		goto out_free;
+		goto out_sum_exit;
 	}
 
 	jffs2_calc_trigger_levels(c);
 
 	return 0;
 
+ out_sum_exit:
+	jffs2_sum_exit(c);
  out_free:
 	kvfree(c->blocks);
 
author maintainer
#75 lore raw

PATCH 75/1126 jffs2: fix memory leak in jffs2_scan_medium

In reply to Greg Kroah-Hartman

From: Baokun Li <[email protected]>

commit 9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream.

If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report:

--------------------------------------------
unreferenced object 0xffff88812b889c40 (size 64):
comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes):

    40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00  @H........1...P.
    00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08  ................
  backtrace:
    [<ffffffffae93a3a3>] __kmalloc+0x613/0x910
    [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0
    [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794
    [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267
    [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30
    [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0
    [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400
    [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0
    [<ffffffffb0316478>] get_tree_mtd+0x498/0x840
    [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30
    [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0
    [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50
    [<ffffffffaea7c3d7>] do_mount+0x107/0x130
    [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0
    [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160
    [<ffffffffb10142f5>] do_syscall_64+0x45/0x70
unreferenced object 0xffff888114b54840 (size 32):
  comm "mount", pid 692, jiffies 4294838325 (age 34.288s)
  hex dump (first 32 bytes):
    c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00  .u..............
    00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5  ......D...kkkkk.
  backtrace:
    [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
    [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90
    [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794
    [...]
unreferenced object 0xffff888114b57280 (size 32):
  comm "mount", pid 692, jiffies 4294838393 (age 34.357s)
  hex dump (first 32 bytes):
    10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00  ..l.............
    00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5  ..8...(...kkkkk.
  backtrace:
    [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
    [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90
    [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794
    [...]
unreferenced object 0xffff8881116cd510 (size 16):
  comm "mount", pid 692, jiffies 4294838395 (age 34.355s)
  hex dump (first 16 bytes):
    00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5  ..........`...k.
  backtrace:
    [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
    [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90
    [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794
    [...]
--------------------------------------------

Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis)

Fixes e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")

Co-developed-with: Zhihao Cheng <[email protected]>

---
 fs/jffs2/scan.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
fs/jffs2/scan.c +4 -2
@@ -136,7 +136,7 @@ int jffs2_scan_medium(struct jffs2_sb_in
 		if (!s) {
 			JFFS2_WARNING("Can't allocate memory for summary\n");
 			ret = -ENOMEM;
-			goto out;
+			goto out_buf;
 		}
 	}
 
@@ -275,13 +275,15 @@ int jffs2_scan_medium(struct jffs2_sb_in
 	}
 	ret = 0;
  out:
+	jffs2_sum_reset_collected(s);
+	kfree(s);
+ out_buf:
 	if (buf_size)
 		kfree(flashbuf);
 #ifndef __ECOS
 	else
 		mtd_unpoint(c->mtd, 0, c->mtd->size);
 #endif
-	kfree(s);
 	return ret;
 }
 
author maintainer
#76 lore raw

PATCH 76/1126 mm: fs: fix lru_cache_disabled race in bh_lru

In reply to Greg Kroah-Hartman

From: Minchan Kim <[email protected]>

commit c0226eb8bde854e016a594a16f5c0d98aca426fa upstream.

Check lru_cache_disabled under bh_lru_lock. Otherwise, it could introduce race below and it fails to migrate pages containing buffer_head.

CPU 0 CPU 1

bh_lru_install
lru_cache_disable
lru_cache_disabled = false
atomic_inc(&lru_disable_count); invalidate_bh_lrus_cpu of CPU 0 bh_lru_lock __invalidate_bh_lrus bh_lru_unlock
bh_lru_lock
install the bh
bh_lru_unlock

WHen this race happens a CMA allocation fails, which is critical for the workload which depends on CMA.

Fixes 8cc621d2f45d ("mm: fs: invalidate BH LRU during page migration")
Cc Chris Goldsworthy <[email protected]>
Cc Marcelo Tosatti <[email protected]>
Cc John Dias <[email protected]>
---
 fs/buffer.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
fs/buffer.c +5 -3
@@ -1235,16 +1235,18 @@ static void bh_lru_install(struct buffer
 	int i;
 
 	check_irqs_on();
+	bh_lru_lock();
+
 	/*
 	 * the refcount of buffer_head in bh_lru prevents dropping the
 	 * attached page(i.e., try_to_free_buffers) so it could cause
 	 * failing page migration.
 	 * Skip putting upcoming bh into bh_lru until migration is done.
 	 */
-	if (lru_cache_disabled())
+	if (lru_cache_disabled()) {
+		bh_lru_unlock();
 		return;
-
-	bh_lru_lock();
+	}
 
 	b = this_cpu_ptr(&bh_lrus);
 	for (i = 0; i < BH_LRU_SIZE; i++) {
author maintainer
#77 lore raw

PATCH 77/1126 mm: dont skip swap entry even if zap_details specified

In reply to Greg Kroah-Hartman

From: Peter Xu <[email protected]>

commit 5abfd71d936a8aefd9f9ccd299dea7a164a5d455 upstream.

Patch series "mm: Rework zap ptes on swap entries", v5.

Patch 1 should fix a long standing bug for zap_pte_range() on zap_details usage. The risk is we could have some swap entries skipped while we should have zapped them.

Migration entries are not the major concern because file backed memory always zap in the pattern that "first time without page lock, then re-zap with page lock" hence the 2nd zap will always make sure all migration entries are already recovered.

However there can be issues with real swap entries got skipped errornoously. There's a reproducer provided in commit message of patch 1 for that.

Patch 2-4 are cleanups that are based on patch 1. After the whole patchset applied, we should have a very clean view of zap_pte_range().

Only patch 1 needs to be backported to stable if necessary.

This patch (of 4):

The "details" pointer shouldn't be the token to decide whether we should skip swap entries.

For example, when the callers specified details->zap_mapping==NULL, it means the user wants to zap all the pages (including COWed pages), then we need to look into swap entries because there can be private COWed pages that was swapped out.

Skipping some swap entries when details is non-NULL may lead to wrongly leaving some of the swap entries while we should have zapped them.

A reproducer of the problem:

===8<===

        #define _GNU_SOURCE         /* See feature_test_macros(7) */
        #include <stdio.h>
        #include <assert.h>
        #include <unistd.h>
        #include <sys/mman.h>
        #include <sys/types.h>

        int page_size;
        int shmem_fd;
        char *buffer;

        void main(void)
        {
                int ret;
                char val;

                page_size = getpagesize();
                shmem_fd = memfd_create("test", 0);
                assert(shmem_fd >= 0);

                ret = ftruncate(shmem_fd, page_size * 2);
                assert(ret == 0);

                buffer = mmap(NULL, page_size * 2, PROT_READ | PROT_WRITE,
                                MAP_PRIVATE, shmem_fd, 0);
                assert(buffer != MAP_FAILED);

                /* Write private page, swap it out */
                buffer[page_size] = 1;
                madvise(buffer, page_size * 2, MADV_PAGEOUT);

                /* This should drop private buffer[page_size] already */
                ret = ftruncate(shmem_fd, page_size);
                assert(ret == 0);
                /* Recover the size */
                ret = ftruncate(shmem_fd, page_size * 2);
                assert(ret == 0);

                /* Re-read the data, it should be all zero */
                val = buffer[page_size];
                if (val == 0)
                        printf("Good\n");
                else
                        printf("BUG\n");
        }

===8<===

We don't need to touch up the pmd path, because pmd never had a issue with swap entries. For example, shmem pmd migration will always be split into pte level, and same to swapping on anonymous.

Add another helper should_zap_cows() so that we can also check whether we should zap private mappings when there's no page pointer specified.

This patch drops that trick, so we handle swap ptes coherently. Meanwhile we should do the same check upon migration entry, hwpoison entry and genuine swap entries too.

To be explicit, we should still remember to keep the private entries if even_cows==false, and always zap them when even_cows==true.

The issue seems to exist starting from the initial commit of git.

---
 mm/memory.c |   40 +++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)
mm/memory.c +31 -9
@@ -1313,6 +1313,17 @@ struct zap_details {
 	struct folio *single_folio;	/* Locked folio to be unmapped */
 };
 
+/* Whether we should zap all COWed (private) pages too */
+static inline bool should_zap_cows(struct zap_details *details)
+{
+	/* By default, zap all pages */
+	if (!details)
+		return true;
+
+	/* Or, we zap COWed pages only if the caller wants to */
+	return !details->zap_mapping;
+}
+
 /*
  * We set details->zap_mapping when we want to unmap shared but keep private
  * pages. Return true if skip zapping this page, false otherwise.
@@ -1320,11 +1331,15 @@ struct zap_details {
 static inline bool
 zap_skip_check_mapping(struct zap_details *details, struct page *page)
 {
-	if (!details || !page)
+	/* If we can make a decision without *page.. */
+	if (should_zap_cows(details))
+		return false;
+
+	/* E.g. the caller passes NULL for the case of a zero page */
+	if (!page)
 		return false;
 
-	return details->zap_mapping &&
-		(details->zap_mapping != page_rmapping(page));
+	return details->zap_mapping != page_rmapping(page);
 }
 
 static unsigned long zap_pte_range(struct mmu_gather *tlb,
@@ -1405,17 +1420,24 @@ again:
 			continue;
 		}
 
-		/* If details->check_mapping, we leave swap entries. */
-		if (unlikely(details))
-			continue;
-
-		if (!non_swap_entry(entry))
+		if (!non_swap_entry(entry)) {
+			/* Genuine swap entry, hence a private anon page */
+			if (!should_zap_cows(details))
+				continue;
 			rss[MM_SWAPENTS]--;
-		else if (is_migration_entry(entry)) {
+		} else if (is_migration_entry(entry)) {
 			struct page *page;
 
 			page = pfn_swap_entry_to_page(entry);
+			if (zap_skip_check_mapping(details, page))
+				continue;
 			rss[mm_counter(page)]--;
+		} else if (is_hwpoison_entry(entry)) {
+			if (!should_zap_cows(details))
+				continue;
+		} else {
+			/* We should have covered all the swap entry types */
+			WARN_ON_ONCE(1);
 		}
 		if (unlikely(!free_swap_and_cache(entry)))
 			print_bad_pte(vma, addr, ptent, NULL);
author maintainer
#78 lore raw

PATCH 78/1126 mm/pages_alloc.c: dont create ZONE_MOVABLE beyond the end of a node

In reply to Greg Kroah-Hartman

From: Alistair Popple <[email protected]>

commit ddbc84f3f595cf1fc8234a191193b5d20ad43938 upstream.

ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not enough room for ZONE_MOVABLE on that node.

Unfortunately this condition is not checked for. This leads to zone_movable_pfn[] getting set to a pfn greater than the last pfn in a node.

calculate_node_totalpages() then sets zone->present_pages to be greater than zone->spanned_pages which is invalid, as spanned_pages represents the maximum number of pages in a zone assuming no holes.

Subsequently it is possible free_area_init_core() will observe a zone of size zero with present pages. In this case it will skip setting up the zone, including the initialisation of free_lists[].

However populated_zone() checks zone->present_pages to see if a zone has memory available. This is used by iterators such as walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the free_list of each zone in each node, which are assumed to be initialised due to the zone not being empty.

As free_area_init_core() never initialised the free_lists[] this results in the following kernel crash when trying to read /proc/pagetypeinfo:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
  CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
  RIP: 0010:pagetypeinfo_show+0x163/0x460
  Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82
  RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003
  RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001
  RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b
  RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e
  R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00
  R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000
  FS:  00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0
  Call Trace:
   seq_read_iter+0x128/0x460
   proc_reg_read_iter+0x51/0x80
   new_sync_read+0x113/0x1a0
   vfs_read+0x136/0x1d0
   ksys_read+0x70/0xf0
   __x64_sys_read+0x1a/0x20
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix this by checking that the aligned zone_movable_pfn[] does not exceed the end of the node, and if it does skip creating a movable zone on this node.

---
 mm/page_alloc.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
mm/page_alloc.c +8 -1
@@ -7972,10 +7972,17 @@ restart:
 
 out2:
 	/* Align start of ZONE_MOVABLE on all nids to MAX_ORDER_NR_PAGES */
-	for (nid = 0; nid < MAX_NUMNODES; nid++)
+	for (nid = 0; nid < MAX_NUMNODES; nid++) {
+		unsigned long start_pfn, end_pfn;
+
 		zone_movable_pfn[nid] =
 			roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
 
+		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+		if (zone_movable_pfn[nid] >= end_pfn)
+			zone_movable_pfn[nid] = 0;
+	}
+
 out:
 	/* restore the node_state */
 	node_states[N_MEMORY] = saved_node_state;
author maintainer
#79 lore raw

PATCH 79/1126 mm: invalidate hwpoison page cache page in fault path

In reply to Greg Kroah-Hartman

From: Rik van Riel <[email protected]>

commit e53ac7374e64dede04d745ff0e70ff5048378d1f upstream.

Sometimes the page offlining code can leave behind a hwpoisoned clean page cache page. This can lead to programs being killed over and over and over again as they fault in the hwpoisoned page, get killed, and then get re-spawned by whatever wanted to run them.

This is particularly embarrassing when the page was offlined due to having too many corrected memory errors. Now we are killing tasks due to them trying to access memory that probably isn't even corrupted.

This problem can be avoided by invalidating the page from the page fault handler, which already has a branch for dealing with these kinds of pages. With this patch we simply pretend the page fault was successful if the page was invalidated, return to userspace, incur another page fault, read in the file from disk (to a new memory page), and then everything works again.

---
 mm/memory.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
mm/memory.c +7 -2
@@ -3893,11 +3893,16 @@ static vm_fault_t __do_fault(struct vm_f
 		return ret;
 
 	if (unlikely(PageHWPoison(vmf->page))) {
-		if (ret & VM_FAULT_LOCKED)
+		vm_fault_t poisonret = VM_FAULT_HWPOISON;
+		if (ret & VM_FAULT_LOCKED) {
+			/* Retry if a clean page was removed from the cache. */
+			if (invalidate_inode_page(vmf->page))
+				poisonret = 0;
 			unlock_page(vmf->page);
+		}
 		put_page(vmf->page);
 		vmf->page = NULL;
-		return VM_FAULT_HWPOISON;
+		return poisonret;
 	}
 
 	if (unlikely(!(ret & VM_FAULT_LOCKED)))
author maintainer
#80 lore raw

PATCH 80/1126 mempolicy: mbind_range() set_policy() after vma_merge()

In reply to Greg Kroah-Hartman

From: Hugh Dickins <[email protected]>

commit 4e0906008cdb56381638aa17d9c32734eae6d37a upstream.

v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced vma_merge() to mbind_range(); but unlike madvise, mlock and mprotect, it put a "continue" to next vma where its precedents go to update flags on current vma before advancing: that left vma with the wrong setting in the infamous vma_merge() case 8.

v3.10 commit 1444f92c8498 ("mm: merging memory blocks resets mempolicy") tried to fix that in vma_adjust(), without fully understanding the issue.

v3.11 commit 3964acd0dbec ("mm: mempolicy: fix mbind_range() && vma_adjust() interaction") reverted that, and went about the fix in the right way, but chose to optimize out an unnecessary mpol_dup() with a prior mpol_equal() test. But on tmpfs, that also pessimized out the vital call to its ->set_policy(), leaving the new mbind unenforced.

The user visible effect was that the pages got allocated on the local node (happened to be 0), after the mbind() caller had specifically asked for them to be allocated on node 1. There was not any page migration involved in the case reported: the pages simply got allocated on the wrong node.

Just delete that optimization now (though it could be made conditional on vma not having a set_policy). Also remove the "next" variable: it turned out to be blameless, but also pointless.

---
 mm/mempolicy.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
mm/mempolicy.c +1 -7
@@ -786,7 +786,6 @@ static int vma_replace_policy(struct vm_
 static int mbind_range(struct mm_struct *mm, unsigned long start,
 		       unsigned long end, struct mempolicy *new_pol)
 {
-	struct vm_area_struct *next;
 	struct vm_area_struct *prev;
 	struct vm_area_struct *vma;
 	int err = 0;
@@ -801,8 +800,7 @@ static int mbind_range(struct mm_struct
 	if (start > vma->vm_start)
 		prev = vma;
 
-	for (; vma && vma->vm_start < end; prev = vma, vma = next) {
-		next = vma->vm_next;
+	for (; vma && vma->vm_start < end; prev = vma, vma = vma->vm_next) {
 		vmstart = max(start, vma->vm_start);
 		vmend   = min(end, vma->vm_end);
 
@@ -817,10 +815,6 @@ static int mbind_range(struct mm_struct
 				 anon_vma_name(vma));
 		if (prev) {
 			vma = prev;
-			next = vma->vm_next;
-			if (mpol_equal(vma_policy(vma), new_pol))
-				continue;
-			/* vma_merge() joined vma && vma->next, case 8 */
 			goto replace;
 		}
 		if (vma->vm_start != vmstart) {
author maintainer
#81 lore raw

PATCH 81/1126 scsi: core: sd: Add silence_suspend flag to suppress some PM messages

In reply to Greg Kroah-Hartman

From: Adrian Hunter <[email protected]>

commit af4edb1d50c6d1044cb34bc43621411b7ba2cffe upstream.

Kernel messages produced during runtime PM can cause a never-ending cycle because user space utilities (e.g. journald or rsyslog) write the messages back to storage, causing runtime resume, more messages, and so on.

Messages that tell of things that are expected to happen are arguably unnecessary, so add a flag to suppress them. This flag is used by the UFS driver.

---
 drivers/scsi/scsi_error.c  |    9 +++++++--
 drivers/scsi/sd.c          |    6 ++++--
 include/scsi/scsi_device.h |    1 +
 3 files changed, 12 insertions(+), 4 deletions(-)
drivers/scsi/scsi_error.c +7 -2
@@ -484,8 +484,13 @@ static void scsi_report_sense(struct scs
 
 		if (sshdr->asc == 0x29) {
 			evt_type = SDEV_EVT_POWER_ON_RESET_OCCURRED;
-			sdev_printk(KERN_WARNING, sdev,
-				    "Power-on or device reset occurred\n");
+			/*
+			 * Do not print message if it is an expected side-effect
+			 * of runtime PM.
+			 */
+			if (!sdev->silence_suspend)
+				sdev_printk(KERN_WARNING, sdev,
+					    "Power-on or device reset occurred\n");
 		}
 
 		if (sshdr->asc == 0x2a && sshdr->ascq == 0x01) {
drivers/scsi/sd.c +4 -2
@@ -3752,7 +3752,8 @@ static int sd_suspend_common(struct devi
 		return 0;
 
 	if (sdkp->WCE && sdkp->media_present) {
-		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+		if (!sdkp->device->silence_suspend)
+			sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
 		ret = sd_sync_cache(sdkp, &sshdr);
 
 		if (ret) {
@@ -3774,7 +3775,8 @@ static int sd_suspend_common(struct devi
 	}
 
 	if (sdkp->device->manage_start_stop) {
-		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+		if (!sdkp->device->silence_suspend)
+			sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
 		/* an error is not worth aborting a system sleep */
 		ret = sd_start_stop_device(sdkp, 0);
 		if (ignore_stop_errors)
include/scsi/scsi_device.h +1 -0
@@ -206,6 +206,7 @@ struct scsi_device {
 	unsigned rpm_autosuspend:1;	/* Enable runtime autosuspend at device
 					 * creation time */
 	unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
+	unsigned silence_suspend:1;	/* Do not print runtime PM related messages */
 
 	unsigned int queue_stopped;	/* request queue is quiesced */
 	bool offline_already;		/* Device offline message logged */
author maintainer
#82 lore raw

PATCH 82/1126 scsi: ufs: Fix runtime PM messages never-ending cycle

In reply to Greg Kroah-Hartman

From: Adrian Hunter <[email protected]>

commit 71bb9ab6e3511b7bb98678a19eb8cf1ccbf3ca2f upstream.

Kernel messages produced during runtime PM can cause a never-ending cycle because user space utilities (e.g. journald or rsyslog) write the messages back to storage, causing runtime resume, more messages, and so on.

Messages that tell of things that are expected to happen, are arguably unnecessary, so suppress them.

UFS driver messages are changes to from dev_err() to dev_dbg() which means they will not display unless activated by dynamic debug of building with -DDEBUG.

sdev->silence_suspend is set to skip messages from sd_suspend_common() "Synchronizing SCSI cache", "Stopping disk" and scsi_report_sense() "Power-on or device reset occurred" message (Note, that message appears when the LUN is accessed after runtime PM, not during runtime PM)

Example messages from Ubuntu 21.10:

 $ dmesg | tail
 [ 1620.380071] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
 [ 1620.408825] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
 [ 1620.409020] ufshcd 0000:00:12.5: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
 [ 1620.409524] sd 0:0:0:0: Power-on or device reset occurred
 [ 1622.938794] sd 0:0:0:0: [sda] Synchronizing SCSI cache
 [ 1622.939184] ufs_device_wlun 0:0:0:49488: Power-on or device reset occurred
 [ 1625.183175] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
 [ 1625.208041] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
 [ 1625.208311] ufshcd 0000:00:12.5: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
 [ 1625.209035] sd 0:0:0:0: Power-on or device reset occurred

Note for stable: depends on patch "scsi: core: sd: Add silence_suspend flag to suppress some PM messages".

---
 drivers/scsi/ufs/ufshcd.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)
drivers/scsi/ufs/ufshcd.c +19 -2
@@ -585,7 +585,12 @@ static void ufshcd_print_pwr_info(struct
 		"INVALID MODE",
 	};
 
-	dev_err(hba->dev, "%s:[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n",
+	/*
+	 * Using dev_dbg to avoid messages during runtime PM to avoid
+	 * never-ending cycles of messages written back to storage by user space
+	 * causing runtime resume, causing more messages and so on.
+	 */
+	dev_dbg(hba->dev, "%s:[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n",
 		 __func__,
 		 hba->pwr_info.gear_rx, hba->pwr_info.gear_tx,
 		 hba->pwr_info.lane_rx, hba->pwr_info.lane_tx,
@@ -5024,6 +5029,12 @@ static int ufshcd_slave_configure(struct
 		pm_runtime_get_noresume(&sdev->sdev_gendev);
 	else if (ufshcd_is_rpm_autosuspend_allowed(hba))
 		sdev->rpm_autosuspend = 1;
+	/*
+	 * Do not print messages during runtime PM to avoid never-ending cycles
+	 * of messages written back to storage by user space causing runtime
+	 * resume, causing more messages and so on.
+	 */
+	sdev->silence_suspend = 1;
 
 	ufshcd_crypto_register(hba, q);
 
@@ -7339,7 +7350,13 @@ static u32 ufshcd_find_max_sup_active_ic
 
 	if (!hba->vreg_info.vcc || !hba->vreg_info.vccq ||
 						!hba->vreg_info.vccq2) {
-		dev_err(hba->dev,
+		/*
+		 * Using dev_dbg to avoid messages during runtime PM to avoid
+		 * never-ending cycles of messages written back to storage by
+		 * user space causing runtime resume, causing more messages and
+		 * so on.
+		 */
+		dev_dbg(hba->dev,
 			"%s: Regulator capability was not set, actvIccLevel=%d",
 							__func__, icc_level);
 		goto out;
author maintainer
#83 lore raw

PATCH 83/1126 scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters

In reply to Greg Kroah-Hartman

From: James Smart <[email protected]>

commit 07e0984b96ec1ba8c6de1c092b986b00ea0c114c upstream.

In the original FPIN commit, stats were incremented by the event_count. Event_count is the minimum # of events that must occur before an FPIN is sent. Thus, its not the actual number of events, and could be significantly off (too low) as it doesn't reflect anything not reported. Rather than attempt to count events, have the statistic count how many FPINS cross the threshold and were reported.

Fixes 3dcfe0de5a97 ("scsi: fc: Parse FPIN packets and update statistics")
Cc <[email protected]> # v5.11+
Cc Shyam Sundar <[email protected]>
Cc Nilesh Javali <[email protected]>
---
 drivers/scsi/scsi_transport_fc.c |   39 ++++++++++++++++-----------------------
 1 file changed, 16 insertions(+), 23 deletions(-)
drivers/scsi/scsi_transport_fc.c +16 -23
@@ -34,7 +34,7 @@ static int fc_bsg_hostadd(struct Scsi_Ho
 static int fc_bsg_rportadd(struct Scsi_Host *, struct fc_rport *);
 static void fc_bsg_remove(struct request_queue *);
 static void fc_bsg_goose_queue(struct fc_rport *);
-static void fc_li_stats_update(struct fc_fn_li_desc *li_desc,
+static void fc_li_stats_update(u16 event_type,
 			       struct fc_fpin_stats *stats);
 static void fc_delivery_stats_update(u32 reason_code,
 				     struct fc_fpin_stats *stats);
@@ -670,42 +670,34 @@ fc_find_rport_by_wwpn(struct Scsi_Host *
 EXPORT_SYMBOL(fc_find_rport_by_wwpn);
 
 static void
-fc_li_stats_update(struct fc_fn_li_desc *li_desc,
+fc_li_stats_update(u16 event_type,
 		   struct fc_fpin_stats *stats)
 {
-	stats->li += be32_to_cpu(li_desc->event_count);
-	switch (be16_to_cpu(li_desc->event_type)) {
+	stats->li++;
+	switch (event_type) {
 	case FPIN_LI_UNKNOWN:
-		stats->li_failure_unknown +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_failure_unknown++;
 		break;
 	case FPIN_LI_LINK_FAILURE:
-		stats->li_link_failure_count +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_link_failure_count++;
 		break;
 	case FPIN_LI_LOSS_OF_SYNC:
-		stats->li_loss_of_sync_count +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_loss_of_sync_count++;
 		break;
 	case FPIN_LI_LOSS_OF_SIG:
-		stats->li_loss_of_signals_count +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_loss_of_signals_count++;
 		break;
 	case FPIN_LI_PRIM_SEQ_ERR:
-		stats->li_prim_seq_err_count +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_prim_seq_err_count++;
 		break;
 	case FPIN_LI_INVALID_TX_WD:
-		stats->li_invalid_tx_word_count +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_invalid_tx_word_count++;
 		break;
 	case FPIN_LI_INVALID_CRC:
-		stats->li_invalid_crc_count +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_invalid_crc_count++;
 		break;
 	case FPIN_LI_DEVICE_SPEC:
-		stats->li_device_specific +=
-		    be32_to_cpu(li_desc->event_count);
+		stats->li_device_specific++;
 		break;
 	}
 }
@@ -767,6 +759,7 @@ fc_fpin_li_stats_update(struct Scsi_Host
 	struct fc_rport *attach_rport = NULL;
 	struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
 	struct fc_fn_li_desc *li_desc = (struct fc_fn_li_desc *)tlv;
+	u16 event_type = be16_to_cpu(li_desc->event_type);
 	u64 wwpn;
 
 	rport = fc_find_rport_by_wwpn(shost,
@@ -775,7 +768,7 @@ fc_fpin_li_stats_update(struct Scsi_Host
 	    (rport->roles & FC_PORT_ROLE_FCP_TARGET ||
 	     rport->roles & FC_PORT_ROLE_NVME_TARGET)) {
 		attach_rport = rport;
-		fc_li_stats_update(li_desc, &attach_rport->fpin_stats);
+		fc_li_stats_update(event_type, &attach_rport->fpin_stats);
 	}
 
 	if (be32_to_cpu(li_desc->pname_count) > 0) {
@@ -789,14 +782,14 @@ fc_fpin_li_stats_update(struct Scsi_Host
 			    rport->roles & FC_PORT_ROLE_NVME_TARGET)) {
 				if (rport == attach_rport)
 					continue;
-				fc_li_stats_update(li_desc,
+				fc_li_stats_update(event_type,
 						   &rport->fpin_stats);
 			}
 		}
 	}
 
 	if (fc_host->port_name == be64_to_cpu(li_desc->attached_wwpn))
-		fc_li_stats_update(li_desc, &fc_host->fpin_stats);
+		fc_li_stats_update(event_type, &fc_host->fpin_stats);
 }
 
 /*
author maintainer
#84 lore raw

PATCH 84/1126 scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

commit 8454563e4c2aafbfb81a383ab423ea8b9b430a25 upstream.

To detect for the DMA_NONE (no data transfer) DMA direction, sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This test does not include the ATA_CMD_NCQ_NON_DATA command as this command protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and not as ATA_PROT_NODATA.

To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA direction, use "!ata_is_data()".

---
 drivers/scsi/libsas/sas_ata.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/libsas/sas_ata.c +1 -1
@@ -197,7 +197,7 @@ static unsigned int sas_ata_qc_issue(str
 		task->total_xfer_len = qc->nbytes;
 		task->num_scatter = qc->n_elem;
 		task->data_dir = qc->dma_dir;
-	} else if (qc->tf.protocol == ATA_PROT_NODATA) {
+	} else if (!ata_is_data(qc->tf.protocol)) {
 		task->data_dir = DMA_NONE;
 	} else {
 		for_each_sg(qc->sg, sg, qc->n_elem, si)
author maintainer
#85 lore raw

PATCH 85/1126 qed: display VF trust config

In reply to Greg Kroah-Hartman

From: Manish Chopra <[email protected]>

commit 4e6e6bec7440b9b76f312f28b1f4e944eebb3abc upstream.

Driver does support SR-IOV VFs trust configuration but it does not display it when queried via ip link utility.

Fixes f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/qlogic/qed/qed_sriov.c +1 -0
@@ -4719,6 +4719,7 @@ static int qed_get_vf_config(struct qed_
 	tx_rate = vf_info->tx_rate;
 	ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
 	ivi->min_tx_rate = qed_iov_get_vf_min_rate(hwfn, vf_id);
+	ivi->trusted = vf_info->is_trusted_request;
 
 	return 0;
 }
author maintainer
#86 lore raw

PATCH 86/1126 qed: validate and restrict untrusted VFs vlan promisc mode

In reply to Greg Kroah-Hartman

From: Manish Chopra <[email protected]>

commit cbcc44db2cf7b836896733acc0e5ea966136ed22 upstream.

Today when VFs are put in promiscuous mode, they can request PF to configure device for them to receive all VLANs traffic regardless of what vlan is configured by the PF (via ip link) and PF allows this config request regardless of whether VF is trusted or not.

Quoted 1 line

From security POV, when VLAN is configured for VF through PF (via ip link),

honour such config requests from VF only when they are configured to be trusted, otherwise restrict such VFs vlan promisc mode config.

Fixes f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c |   28 ++++++++++++++++++++++++++--
 drivers/net/ethernet/qlogic/qed/qed_sriov.h |    1 +
 2 files changed, 27 insertions(+), 2 deletions(-)
drivers/net/ethernet/qlogic/qed/qed_sriov.c +26 -2
@@ -2984,12 +2984,16 @@ static int qed_iov_pre_update_vport(stru
 	u8 mask = QED_ACCEPT_UCAST_UNMATCHED | QED_ACCEPT_MCAST_UNMATCHED;
 	struct qed_filter_accept_flags *flags = &params->accept_flags;
 	struct qed_public_vf_info *vf_info;
+	u16 tlv_mask;
+
+	tlv_mask = BIT(QED_IOV_VP_UPDATE_ACCEPT_PARAM) |
+		   BIT(QED_IOV_VP_UPDATE_ACCEPT_ANY_VLAN);
 
 	/* Untrusted VFs can't even be trusted to know that fact.
 	 * Simply indicate everything is configured fine, and trace
 	 * configuration 'behind their back'.
 	 */
-	if (!(*tlvs & BIT(QED_IOV_VP_UPDATE_ACCEPT_PARAM)))
+	if (!(*tlvs & tlv_mask))
 		return 0;
 
 	vf_info = qed_iov_get_public_vf_info(hwfn, vfid, true);
@@ -3006,6 +3010,13 @@ static int qed_iov_pre_update_vport(stru
 			flags->tx_accept_filter &= ~mask;
 	}
 
+	if (params->update_accept_any_vlan_flg) {
+		vf_info->accept_any_vlan = params->accept_any_vlan;
+
+		if (vf_info->forced_vlan && !vf_info->is_trusted_configured)
+			params->accept_any_vlan = false;
+	}
+
 	return 0;
 }
 
@@ -5150,6 +5161,12 @@ static void qed_iov_handle_trust_change(
 
 		params.update_ctl_frame_check = 1;
 		params.mac_chk_en = !vf_info->is_trusted_configured;
+		params.update_accept_any_vlan_flg = 0;
+
+		if (vf_info->accept_any_vlan && vf_info->forced_vlan) {
+			params.update_accept_any_vlan_flg = 1;
+			params.accept_any_vlan = vf_info->accept_any_vlan;
+		}
 
 		if (vf_info->rx_accept_mode & mask) {
 			flags->update_rx_mode_config = 1;
@@ -5165,13 +5182,20 @@ static void qed_iov_handle_trust_change(
 		if (!vf_info->is_trusted_configured) {
 			flags->rx_accept_filter &= ~mask;
 			flags->tx_accept_filter &= ~mask;
+			params.accept_any_vlan = false;
 		}
 
 		if (flags->update_rx_mode_config ||
 		    flags->update_tx_mode_config ||
-		    params.update_ctl_frame_check)
+		    params.update_ctl_frame_check ||
+		    params.update_accept_any_vlan_flg) {
+			DP_VERBOSE(hwfn, QED_MSG_IOV,
+				   "vport update config for %s VF[abs 0x%x rel 0x%x]\n",
+				   vf_info->is_trusted_configured ? "trusted" : "untrusted",
+				   vf->abs_vf_id, vf->relative_vf_id);
 			qed_sp_vport_update(hwfn, &params,
 					    QED_SPQ_MODE_EBLOCK, NULL);
+		}
 	}
 }
 
drivers/net/ethernet/qlogic/qed/qed_sriov.h +1 -0
@@ -62,6 +62,7 @@ struct qed_public_vf_info {
 	bool is_trusted_request;
 	u8 rx_accept_mode;
 	u8 tx_accept_mode;
+	bool accept_any_vlan;
 };
 
 struct qed_iov_vf_init_params {
author maintainer
#87 lore raw

PATCH 87/1126 riscv: dts: canaan: Fix SPI3 bus width

In reply to Greg Kroah-Hartman

From: Niklas Cassel <[email protected]>

commit 6846d656106add3aeefcd6eda0dc885787deaa6e upstream.

According to the K210 Standalone SDK Programming guide:
https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf

Section 15.4.3.3:
SPI0 and SPI1 supports: standard, dual, quad and octal transfers. SPI3 supports: standard, dual and quad transfers (octal is not supported).

In order to support quad transfers (Quad SPI), SPI3 must have four IO wires connected to the SPI flash.

Update the device tree to specify the correct bus width.

Tested on maix bit, maix dock and maixduino, which all have the same SPI flash (gd25lq128d) connected to SPI3. maix go is untested, but it would not make sense for this k210 board to be designed differently.

Fixes 8f5b0e79f3e5 ("riscv: Add SiPeed MAIXDUINO board device tree")
Fixes 8194f08bda18 ("riscv: Add SiPeed MAIX GO board device tree")
Fixes a40f920964c4 ("riscv: Add SiPeed MAIX DOCK board device tree")
Fixes 97c279bcf813 ("riscv: Add SiPeed MAIX BiT board device tree")
---
 arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts  |    2 ++
 arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts |    2 ++
 arch/riscv/boot/dts/canaan/sipeed_maix_go.dts   |    2 ++
 arch/riscv/boot/dts/canaan/sipeed_maixduino.dts |    2 ++
 4 files changed, 8 insertions(+)
arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts +2 -0
@@ -203,6 +203,8 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		broken-flash-reset;
 	};
arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts +2 -0
@@ -205,6 +205,8 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		broken-flash-reset;
 	};
arch/riscv/boot/dts/canaan/sipeed_maix_go.dts +2 -0
@@ -213,6 +213,8 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		broken-flash-reset;
 	};
arch/riscv/boot/dts/canaan/sipeed_maixduino.dts +2 -0
@@ -178,6 +178,8 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		broken-flash-reset;
 	};
author maintainer
#88 lore raw

PATCH 88/1126 riscv: Fix fill_callchain return value

In reply to Greg Kroah-Hartman

From: Nikita Shubin <[email protected]>

commit 2b2b574ac587ec5bd7716a356492a85ab8b0ce9f upstream.

perf_callchain_store return 0 on success, -1 otherwise, fix fill_callchain to return correct bool value.

Fixes dbeb90b0c1eb ("riscv: Add perf callchain support")
---
 arch/riscv/kernel/perf_callchain.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/perf_callchain.c +1 -1
@@ -68,7 +68,7 @@ void perf_callchain_user(struct perf_cal
 
 static bool fill_callchain(void *entry, unsigned long pc)
 {
-	return perf_callchain_store(entry, pc);
+	return perf_callchain_store(entry, pc) == 0;
 }
 
 void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
author maintainer
#89 lore raw

PATCH 89/1126 riscv: Increase stack size under KASAN

In reply to Greg Kroah-Hartman

From: Dmitry Vyukov <[email protected]>

commit b81d591386c3a50b96dddcf663628ea0df0bf2b3 upstream.

KASAN requires more stack space because of compiler instrumentation. Increase stack size as other arches do.

Reported-by [email protected]
Fixes 8ad8b72721d0 ("riscv: Add KASAN support")
---
 arch/riscv/include/asm/thread_info.h |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
arch/riscv/include/asm/thread_info.h +8 -2
@@ -11,11 +11,17 @@
 #include <asm/page.h>
 #include <linux/const.h>
 
+#ifdef CONFIG_KASAN
+#define KASAN_STACK_ORDER 1
+#else
+#define KASAN_STACK_ORDER 0
+#endif
+
 /* thread information allocation */
 #ifdef CONFIG_64BIT
-#define THREAD_SIZE_ORDER	(2)
+#define THREAD_SIZE_ORDER	(2 + KASAN_STACK_ORDER)
 #else
-#define THREAD_SIZE_ORDER	(1)
+#define THREAD_SIZE_ORDER	(1 + KASAN_STACK_ORDER)
 #endif
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 
author maintainer
#90 lore raw

PATCH 90/1126 RISC-V: Declare per cpu boot data as static

In reply to Greg Kroah-Hartman

From: Atish Patra <[email protected]>

commit f1de125766d6f377a4b5d5821bc12928f929a4eb upstream.

The per cpu boot data is only used within the cpu_ops_sbi.c. It can be delcared as static.

Fixes 9a2451f18663 ("RISC-V: Avoid using per cpu array for ordered booting")
---
 arch/riscv/kernel/cpu_ops_sbi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/cpu_ops_sbi.c +1 -1
@@ -21,7 +21,7 @@ const struct cpu_operations cpu_ops_sbi;
  * be invoked from multiple threads in parallel. Define a per cpu data
  * to handle that.
  */
-DEFINE_PER_CPU(struct sbi_hart_boot_data, boot_data);
+static DEFINE_PER_CPU(struct sbi_hart_boot_data, boot_data);
 
 static int sbi_hsm_hart_start(unsigned long hartid, unsigned long saddr,
 			      unsigned long priv)
author maintainer
#91 lore raw

PATCH 91/1126 Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"

In reply to Greg Kroah-Hartman

From: José Expósito <[email protected]>

commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream.

This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40.

The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons.

In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:

[Precision 7x50 Touchpad]
MatchBus=i2c
MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD

However, because of the change introduced in 37ef4c19b4 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space.

In order to avoid breakage on other present or future devices, revert the patch causing the issue.

---
 drivers/input/input.c |    6 ------
 1 file changed, 6 deletions(-)
drivers/input/input.c +0 -6
@@ -2285,12 +2285,6 @@ int input_register_device(struct input_d
 	/* KEY_RESERVED is not supposed to be transmitted to userspace. */
 	__clear_bit(KEY_RESERVED, dev->keybit);
 
-	/* Buttonpads should not map BTN_RIGHT and/or BTN_MIDDLE. */
-	if (test_bit(INPUT_PROP_BUTTONPAD, dev->propbit)) {
-		__clear_bit(BTN_RIGHT, dev->keybit);
-		__clear_bit(BTN_MIDDLE, dev->keybit);
-	}
-
 	/* Make sure that bitmasks not mentioned in dev->evbit are clean. */
 	input_cleanse_bitmasks(dev);
 
author maintainer
#92 lore raw

PATCH 92/1126 cifs: do not skip link targets when an I/O fails

In reply to Greg Kroah-Hartman

From: Paulo Alcantara <[email protected]>

commit 5d7e282541fc91b831a5c4477c5d72881c623df9 upstream.

When I/O fails in one of the currently connected DFS targets, retry it from other targets as specified in MS-DFSC "3.1.5.2 I/O Operation to +Target Fails with an Error Other Than STATUS_PATH_NOT_COVERED."

---
 fs/cifs/connect.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
fs/cifs/connect.c +11 -3
@@ -3473,6 +3473,9 @@ static int connect_dfs_target(struct mou
 	struct cifs_sb_info *cifs_sb = mnt_ctx->cifs_sb;
 	char *oldmnt = cifs_sb->ctx->mount_options;
 
+	cifs_dbg(FYI, "%s: full_path=%s ref_path=%s target=%s\n", __func__, full_path, ref_path,
+		 dfs_cache_get_tgt_name(tit));
+
 	rc = dfs_cache_get_tgt_referral(ref_path, tit, &ref);
 	if (rc)
 		goto out;
@@ -3571,13 +3574,18 @@ static int __follow_dfs_link(struct moun
 	if (rc)
 		goto out;
 
-	/* Try all dfs link targets */
+	/* Try all dfs link targets.  If an I/O fails from currently connected DFS target with an
+	 * error other than STATUS_PATH_NOT_COVERED (-EREMOTE), then retry it from other targets as
+	 * specified in MS-DFSC "3.1.5.2 I/O Operation to Target Fails with an Error Other Than
+	 * STATUS_PATH_NOT_COVERED."
+	 */
 	for (rc = -ENOENT, tit = dfs_cache_get_tgt_iterator(&tl);
 	     tit; tit = dfs_cache_get_next_tgt(&tl, tit)) {
 		rc = connect_dfs_target(mnt_ctx, full_path, mnt_ctx->leaf_fullpath + 1, tit);
 		if (!rc) {
 			rc = is_path_remote(mnt_ctx);
-			break;
+			if (!rc || rc == -EREMOTE)
+				break;
 		}
 	}
 
@@ -3651,7 +3659,7 @@ int cifs_mount(struct cifs_sb_info *cifs
 		goto error;
 
 	rc = is_path_remote(&mnt_ctx);
-	if (rc == -EREMOTE)
+	if (rc)
 		rc = follow_dfs_link(&mnt_ctx);
 	if (rc)
 		goto error;
author maintainer
#93 lore raw

PATCH 93/1126 cifs: fix incorrect use of list iterator after the loop

In reply to Greg Kroah-Hartman

From: Xiaomeng Tong <[email protected]>

commit a96c94481f5993eac2271f9fb4d009b7dc076c24 upstream.

The bug is here:

if (!tcon) {
	resched = true;
	list_del_init(&ses->rlist);
	cifs_put_smb_ses(ses);

Because the list_for_each_entry() never exits early (without any break/goto/return inside the loop), the iterator 'ses' after the loop will always be an pointer to a invalid struct containing the HEAD (&pserver->smb_ses_list). As a result, the uses of 'ses' above will lead to a invalid memory access.

The original intention should have been to walk each entry 'ses' in '&tmp_ses_list', delete '&ses->rlist' and put 'ses'. So fix it with a list_for_each_entry_safe().

Fixes 3663c9045f51a ("cifs: check reconnects for channels of active tcons too")
---
 fs/cifs/smb2pdu.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
fs/cifs/smb2pdu.c +4 -2
@@ -3858,8 +3858,10 @@ void smb2_reconnect_server(struct work_s
 	tcon = kzalloc(sizeof(struct cifs_tcon), GFP_KERNEL);
 	if (!tcon) {
 		resched = true;
-		list_del_init(&ses->rlist);
-		cifs_put_smb_ses(ses);
+		list_for_each_entry_safe(ses, ses2, &tmp_ses_list, rlist) {
+			list_del_init(&ses->rlist);
+			cifs_put_smb_ses(ses);
+		}
 		goto done;
 	}
 
author maintainer
#94 lore raw

PATCH 94/1126 cifs: prevent bad output lengths in smb2_ioctl_query_info()

In reply to Greg Kroah-Hartman

From: Paulo Alcantara <[email protected]>

commit b92e358757b91c2827af112cae9af513f26a3f34 upstream.

When calling smb2_ioctl_query_info() with smb_query_info::flags=PASSTHRU_FSCTL and smb_query_info::output_buffer_length=0, the following would return 0x10

	buffer = memdup_user(arg + sizeof(struct smb_query_info),
			     qi.output_buffer_length);
	if (IS_ERR(buffer)) {
		kfree(vars);
		return PTR_ERR(buffer);
	}

rather than a valid pointer thus making IS_ERR() check fail. This would then cause a NULL ptr deference in @buffer when accessing it later in smb2_ioctl_query_ioctl(). While at it, prevent having a @buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO FileEndOfFileInformation requests when smb_query_info::flags=PASSTHRU_SET_INFO.

Here is a small C reproducer which triggers a NULL ptr in @buffer when passing an invalid smb_query_info::flags

	#include <stdio.h>
	#include <stdlib.h>
	#include <stdint.h>
	#include <unistd.h>
	#include <fcntl.h>
	#include <sys/ioctl.h>

	#define die(s) perror(s), exit(1)
	#define QUERY_INFO 0xc018cf07

	int main(int argc, char *argv[])
	{
		int fd;

		if (argc < 2)
			exit(1);
		fd = open(argv[1], O_RDONLY);
		if (fd == -1)
			die("open");
		if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
			die("ioctl");
		close(fd);
		return 0;
	}

	mount.cifs //srv/share /mnt -o ...
	gcc repro.c && ./a.out /mnt/f0

	[  114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
	[  114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
	[  114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1
	[  114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
	[  114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
	[  114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
	[  114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
	[  114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
	[  114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
	[  114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
	[  114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
	[  114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
	[  114.144852] FS:  00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
	[  114.145338] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	[  114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
	[  114.146131] Call Trace:
	[  114.146291]  <TASK>
	[  114.146432]  ? smb2_query_reparse_tag+0x890/0x890 [cifs]
	[  114.146800]  ? cifs_mapchar+0x460/0x460 [cifs]
	[  114.147121]  ? rcu_read_lock_sched_held+0x3f/0x70
	[  114.147412]  ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
	[  114.147775]  ? dentry_path_raw+0xa6/0xf0
	[  114.148024]  ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
	[  114.148413]  ? smb2_check_message+0x1080/0x1080 [cifs]
	[  114.148766]  ? rcu_read_lock_sched_held+0x3f/0x70
	[  114.149065]  cifs_ioctl+0x1577/0x3320 [cifs]
	[  114.149371]  ? lock_downgrade+0x6f0/0x6f0
	[  114.149631]  ? cifs_readdir+0x2e60/0x2e60 [cifs]
	[  114.149956]  ? rcu_read_lock_sched_held+0x3f/0x70
	[  114.150250]  ? __rseq_handle_notify_resume+0x80b/0xbe0
	[  114.150562]  ? __up_read+0x192/0x710
	[  114.150791]  ? __ia32_sys_rseq+0xf0/0xf0
	[  114.151025]  ? __x64_sys_openat+0x11f/0x1d0
	[  114.151296]  __x64_sys_ioctl+0x127/0x190
	[  114.151549]  do_syscall_64+0x3b/0x90
	[  114.151768]  entry_SYSCALL_64_after_hwframe+0x44/0xae
	[  114.152079] RIP: 0033:0x7f7aead043df
	[  114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
	[  114.153431] RSP: 002b:00007ffc2e0c1f80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
	[  114.153890] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7aead043df
	[  114.154315] RDX: 00007ffc2e0c1ff0 RSI: 00000000c018cf07 RDI: 0000000000000003
	[  114.154747] RBP: 00007ffc2e0c2010 R08: 00007f7aeae03db0 R09: 00007f7aeae24c4e
	[  114.155192] R10: 00007f7aeabf7d40 R11: 0000000000000246 R12: 00007ffc2e0c2128
	[  114.155642] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007f7aeae57000
	[  114.156071]  </TASK>
	[  114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
	[  114.156608] ---[ end trace 0000000000000000 ]---
	[  114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
	[  114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
	[  114.159293] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
	[  114.159641] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
	[  114.160093] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
	[  114.160699] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
	[  114.161196] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
	[  114.155642] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007f7aeae57000
	[  114.156071]  </TASK>
	[  114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
	[  114.156608] ---[ end trace 0000000000000000 ]---
	[  114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
	[  114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
	[  114.159293] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
	[  114.159641] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
	[  114.160093] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
	[  114.160699] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
	[  114.161196] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
	[  114.161823] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
	[  114.162274] FS:  00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
	[  114.162853] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	[  114.163218] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
	[  114.163691] Kernel panic - not syncing: Fatal exception
	[  114.164087] Kernel Offset: disabled
	[  114.164316] ---[ end Kernel panic - not syncing: Fatal exception ]---
---
 fs/cifs/smb2ops.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
fs/cifs/smb2ops.c +10 -6
@@ -1668,11 +1668,12 @@ smb2_ioctl_query_info(const unsigned int
 	if (smb3_encryption_required(tcon))
 		flags |= CIFS_TRANSFORM_REQ;
 
-	buffer = memdup_user(arg + sizeof(struct smb_query_info),
-			     qi.output_buffer_length);
-	if (IS_ERR(buffer)) {
-		kfree(vars);
-		return PTR_ERR(buffer);
+	if (qi.output_buffer_length) {
+		buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length);
+		if (IS_ERR(buffer)) {
+			kfree(vars);
+			return PTR_ERR(buffer);
+		}
 	}
 
 	/* Open */
@@ -1735,10 +1736,13 @@ smb2_ioctl_query_info(const unsigned int
 		/* Can eventually relax perm check since server enforces too */
 		if (!capable(CAP_SYS_ADMIN))
 			rc = -EPERM;
-		else  {
+		else if (qi.output_buffer_length < 8)
+			rc = -EINVAL;
+		else {
 			rqst[1].rq_iov = &vars->si_iov[0];
 			rqst[1].rq_nvec = 1;
 
+			/* MS-FSCC 2.4.13 FileEndOfFileInformation */
 			size[0] = 8;
 			data[0] = buffer;
 
author maintainer
#95 lore raw

PATCH 95/1126 cifs: fix NULL ptr dereference in smb2_ioctl_query_info()

In reply to Greg Kroah-Hartman

From: Paulo Alcantara <[email protected]>

commit d6f5e358452479fa8a773b5c6ccc9e4ec5a20880 upstream.

When calling smb2_ioctl_query_info() with invalid smb_query_info::flags, a NULL ptr dereference is triggered when trying to kfree() uninitialised rqst[n].rq_iov array.

This also fixes leaked paths that are created in SMB2_open_init() which required SMB2_open_free() to properly free them.

Here is a small C reproducer that triggers it

	#include <stdio.h>
	#include <stdlib.h>
	#include <stdint.h>
	#include <unistd.h>
	#include <fcntl.h>
	#include <sys/ioctl.h>

	#define die(s) perror(s), exit(1)
	#define QUERY_INFO 0xc018cf07

	int main(int argc, char *argv[])
	{
		int fd;

		if (argc < 2)
			exit(1);
		fd = open(argv[1], O_RDONLY);
		if (fd == -1)
			die("open");
		if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
			die("ioctl");
		close(fd);
		return 0;
	}

	mount.cifs //srv/share /mnt -o ...
	gcc repro.c && ./a.out /mnt/f0

	[ 1832.124468] CIFS: VFS: \\w22-dc.zelda.test\test Invalid passthru query flags: 0x4
	[ 1832.125043] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
	[ 1832.125764] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
	[ 1832.126241] CPU: 3 PID: 1133 Comm: a.out Not tainted 5.17.0-rc8 #2
	[ 1832.126630] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
	[ 1832.127322] RIP: 0010:smb2_ioctl_query_info+0x7a3/0xe30 [cifs]
	[ 1832.127749] Code: 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 6c 05 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 74 24 28 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 cb 04 00 00 49 8b 3e e8 bb fc fa ff 48 89 da 48
	[ 1832.128911] RSP: 0018:ffffc90000957b08 EFLAGS: 00010256
	[ 1832.129243] RAX: dffffc0000000000 RBX: ffff888117e9b850 RCX: ffffffffa020580d
	[ 1832.129691] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a2c0
	[ 1832.130137] RBP: ffff888117e9b878 R08: 0000000000000001 R09: 0000000000000003
	[ 1832.130585] R10: fffffbfff4087458 R11: 0000000000000001 R12: ffff888117e9b800
	[ 1832.131037] R13: 00000000ffffffea R14: 0000000000000000 R15: ffff888117e9b8a8
	[ 1832.131485] FS:  00007fcee9900740(0000) GS:ffff888151a00000(0000) knlGS:0000000000000000
	[ 1832.131993] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	[ 1832.132354] CR2: 00007fcee9a1ef5e CR3: 0000000114cd2000 CR4: 0000000000350ee0
	[ 1832.132801] Call Trace:
	[ 1832.132962]  <TASK>
	[ 1832.133104]  ? smb2_query_reparse_tag+0x890/0x890 [cifs]
	[ 1832.133489]  ? cifs_mapchar+0x460/0x460 [cifs]
	[ 1832.133822]  ? rcu_read_lock_sched_held+0x3f/0x70
	[ 1832.134125]  ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
	[ 1832.134502]  ? lock_downgrade+0x6f0/0x6f0
	[ 1832.134760]  ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
	[ 1832.135170]  ? smb2_check_message+0x1080/0x1080 [cifs]
	[ 1832.135545]  cifs_ioctl+0x1577/0x3320 [cifs]
	[ 1832.135864]  ? lock_downgrade+0x6f0/0x6f0
	[ 1832.136125]  ? cifs_readdir+0x2e60/0x2e60 [cifs]
	[ 1832.136468]  ? rcu_read_lock_sched_held+0x3f/0x70
	[ 1832.136769]  ? __rseq_handle_notify_resume+0x80b/0xbe0
	[ 1832.137096]  ? __up_read+0x192/0x710
	[ 1832.137327]  ? __ia32_sys_rseq+0xf0/0xf0
	[ 1832.137578]  ? __x64_sys_openat+0x11f/0x1d0
	[ 1832.137850]  __x64_sys_ioctl+0x127/0x190
	[ 1832.138103]  do_syscall_64+0x3b/0x90
	[ 1832.138378]  entry_SYSCALL_64_after_hwframe+0x44/0xae
	[ 1832.138702] RIP: 0033:0x7fcee9a253df
	[ 1832.138937] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
	[ 1832.140107] RSP: 002b:00007ffeba94a8a0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
	[ 1832.140606] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcee9a253df
	[ 1832.141058] RDX: 00007ffeba94a910 RSI: 00000000c018cf07 RDI: 0000000000000003
	[ 1832.141503] RBP: 00007ffeba94a930 R08: 00007fcee9b24db0 R09: 00007fcee9b45c4e
	[ 1832.141948] R10: 00007fcee9918d40 R11: 0000000000000246 R12: 00007ffeba94aa48
	[ 1832.142396] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007fcee9b78000
	[ 1832.142851]  </TASK>
	[ 1832.142994] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload [last unloaded: cifs]
---
 fs/cifs/smb2ops.c |  124 ++++++++++++++++++++++++++++--------------------------
 1 file changed, 65 insertions(+), 59 deletions(-)
fs/cifs/smb2ops.c +65 -59
@@ -1643,6 +1643,7 @@ smb2_ioctl_query_info(const unsigned int
 	unsigned int size[2];
 	void *data[2];
 	int create_options = is_dir ? CREATE_NOT_FILE : CREATE_NOT_DIR;
+	void (*free_req1_func)(struct smb_rqst *r);
 
 	vars = kzalloc(sizeof(*vars), GFP_ATOMIC);
 	if (vars == NULL)
@@ -1652,17 +1653,18 @@ smb2_ioctl_query_info(const unsigned int
 
 	resp_buftype[0] = resp_buftype[1] = resp_buftype[2] = CIFS_NO_BUFFER;
 
-	if (copy_from_user(&qi, arg, sizeof(struct smb_query_info)))
-		goto e_fault;
-
+	if (copy_from_user(&qi, arg, sizeof(struct smb_query_info))) {
+		rc = -EFAULT;
+		goto free_vars;
+	}
 	if (qi.output_buffer_length > 1024) {
-		kfree(vars);
-		return -EINVAL;
+		rc = -EINVAL;
+		goto free_vars;
 	}
 
 	if (!ses || !server) {
-		kfree(vars);
-		return -EIO;
+		rc = -EIO;
+		goto free_vars;
 	}
 
 	if (smb3_encryption_required(tcon))
@@ -1671,8 +1673,8 @@ smb2_ioctl_query_info(const unsigned int
 	if (qi.output_buffer_length) {
 		buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length);
 		if (IS_ERR(buffer)) {
-			kfree(vars);
-			return PTR_ERR(buffer);
+			rc = PTR_ERR(buffer);
+			goto free_vars;
 		}
 	}
 
@@ -1711,48 +1713,45 @@ smb2_ioctl_query_info(const unsigned int
 	rc = SMB2_open_init(tcon, server,
 			    &rqst[0], &oplock, &oparms, path);
 	if (rc)
-		goto iqinf_exit;
+		goto free_output_buffer;
 	smb2_set_next_command(tcon, &rqst[0]);
 
 	/* Query */
 	if (qi.flags & PASSTHRU_FSCTL) {
 		/* Can eventually relax perm check since server enforces too */
-		if (!capable(CAP_SYS_ADMIN))
+		if (!capable(CAP_SYS_ADMIN)) {
 			rc = -EPERM;
-		else  {
-			rqst[1].rq_iov = &vars->io_iov[0];
-			rqst[1].rq_nvec = SMB2_IOCTL_IOV_SIZE;
-
-			rc = SMB2_ioctl_init(tcon, server,
-					     &rqst[1],
-					     COMPOUND_FID, COMPOUND_FID,
-					     qi.info_type, true, buffer,
-					     qi.output_buffer_length,
-					     CIFSMaxBufSize -
-					     MAX_SMB2_CREATE_RESPONSE_SIZE -
-					     MAX_SMB2_CLOSE_RESPONSE_SIZE);
+			goto free_open_req;
 		}
+		rqst[1].rq_iov = &vars->io_iov[0];
+		rqst[1].rq_nvec = SMB2_IOCTL_IOV_SIZE;
+
+		rc = SMB2_ioctl_init(tcon, server, &rqst[1], COMPOUND_FID, COMPOUND_FID,
+				     qi.info_type, true, buffer, qi.output_buffer_length,
+				     CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE -
+				     MAX_SMB2_CLOSE_RESPONSE_SIZE);
+		free_req1_func = SMB2_ioctl_free;
 	} else if (qi.flags == PASSTHRU_SET_INFO) {
 		/* Can eventually relax perm check since server enforces too */
-		if (!capable(CAP_SYS_ADMIN))
+		if (!capable(CAP_SYS_ADMIN)) {
 			rc = -EPERM;
-		else if (qi.output_buffer_length < 8)
+			goto free_open_req;
+		}
+		if (qi.output_buffer_length < 8) {
 			rc = -EINVAL;
-		else {
-			rqst[1].rq_iov = &vars->si_iov[0];
-			rqst[1].rq_nvec = 1;
-
-			/* MS-FSCC 2.4.13 FileEndOfFileInformation */
-			size[0] = 8;
-			data[0] = buffer;
-
-			rc = SMB2_set_info_init(tcon, server,
-					&rqst[1],
-					COMPOUND_FID, COMPOUND_FID,
-					current->tgid,
-					FILE_END_OF_FILE_INFORMATION,
-					SMB2_O_INFO_FILE, 0, data, size);
+			goto free_open_req;
 		}
+		rqst[1].rq_iov = &vars->si_iov[0];
+		rqst[1].rq_nvec = 1;
+
+		/* MS-FSCC 2.4.13 FileEndOfFileInformation */
+		size[0] = 8;
+		data[0] = buffer;
+
+		rc = SMB2_set_info_init(tcon, server, &rqst[1], COMPOUND_FID, COMPOUND_FID,
+					current->tgid, FILE_END_OF_FILE_INFORMATION,
+					SMB2_O_INFO_FILE, 0, data, size);
+		free_req1_func = SMB2_set_info_free;
 	} else if (qi.flags == PASSTHRU_QUERY_INFO) {
 		rqst[1].rq_iov = &vars->qi_iov[0];
 		rqst[1].rq_nvec = 1;
@@ -1763,6 +1762,7 @@ smb2_ioctl_query_info(const unsigned int
 				  qi.info_type, qi.additional_information,
 				  qi.input_buffer_length,
 				  qi.output_buffer_length, buffer);
+		free_req1_func = SMB2_query_info_free;
 	} else { /* unknown flags */
 		cifs_tcon_dbg(VFS, "Invalid passthru query flags: 0x%x\n",
 			      qi.flags);
@@ -1770,7 +1770,7 @@ smb2_ioctl_query_info(const unsigned int
 	}
 
 	if (rc)
-		goto iqinf_exit;
+		goto free_open_req;
 	smb2_set_next_command(tcon, &rqst[1]);
 	smb2_set_related(&rqst[1]);
 
@@ -1781,14 +1781,14 @@ smb2_ioctl_query_info(const unsigned int
 	rc = SMB2_close_init(tcon, server,
 			     &rqst[2], COMPOUND_FID, COMPOUND_FID, false);
 	if (rc)
-		goto iqinf_exit;
+		goto free_req_1;
 	smb2_set_related(&rqst[2]);
 
 	rc = compound_send_recv(xid, ses, server,
 				flags, 3, rqst,
 				resp_buftype, rsp_iov);
 	if (rc)
-		goto iqinf_exit;
+		goto out;
 
 	/* No need to bump num_remote_opens since handle immediately closed */
 	if (qi.flags & PASSTHRU_FSCTL) {
@@ -1798,18 +1798,22 @@ smb2_ioctl_query_info(const unsigned int
 			qi.input_buffer_length = le32_to_cpu(io_rsp->OutputCount);
 		if (qi.input_buffer_length > 0 &&
 		    le32_to_cpu(io_rsp->OutputOffset) + qi.input_buffer_length
-		    > rsp_iov[1].iov_len)
-			goto e_fault;
+		    > rsp_iov[1].iov_len) {
+			rc = -EFAULT;
+			goto out;
+		}
 
 		if (copy_to_user(&pqi->input_buffer_length,
 				 &qi.input_buffer_length,
-				 sizeof(qi.input_buffer_length)))
-			goto e_fault;
+				 sizeof(qi.input_buffer_length))) {
+			rc = -EFAULT;
+			goto out;
+		}
 
 		if (copy_to_user((void __user *)pqi + sizeof(struct smb_query_info),
 				 (const void *)io_rsp + le32_to_cpu(io_rsp->OutputOffset),
 				 qi.input_buffer_length))
-			goto e_fault;
+			rc = -EFAULT;
 	} else {
 		pqi = (struct smb_query_info __user *)arg;
 		qi_rsp = (struct smb2_query_info_rsp *)rsp_iov[1].iov_base;
@@ -1817,28 +1821,30 @@ smb2_ioctl_query_info(const unsigned int
 			qi.input_buffer_length = le32_to_cpu(qi_rsp->OutputBufferLength);
 		if (copy_to_user(&pqi->input_buffer_length,
 				 &qi.input_buffer_length,
-				 sizeof(qi.input_buffer_length)))
-			goto e_fault;
+				 sizeof(qi.input_buffer_length))) {
+			rc = -EFAULT;
+			goto out;
+		}
 
 		if (copy_to_user(pqi + 1, qi_rsp->Buffer,
 				 qi.input_buffer_length))
-			goto e_fault;
+			rc = -EFAULT;
 	}
 
- iqinf_exit:
-	cifs_small_buf_release(rqst[0].rq_iov[0].iov_base);
-	cifs_small_buf_release(rqst[1].rq_iov[0].iov_base);
-	cifs_small_buf_release(rqst[2].rq_iov[0].iov_base);
+out:
 	free_rsp_buf(resp_buftype[0], rsp_iov[0].iov_base);
 	free_rsp_buf(resp_buftype[1], rsp_iov[1].iov_base);
 	free_rsp_buf(resp_buftype[2], rsp_iov[2].iov_base);
-	kfree(vars);
+	SMB2_close_free(&rqst[2]);
+free_req_1:
+	free_req1_func(&rqst[1]);
+free_open_req:
+	SMB2_open_free(&rqst[0]);
+free_output_buffer:
 	kfree(buffer);
+free_vars:
+	kfree(vars);
 	return rc;
-
-e_fault:
-	rc = -EFAULT;
-	goto iqinf_exit;
 }
 
 static ssize_t
author maintainer
#96 lore raw

PATCH 96/1126 ALSA: cs4236: fix an incorrect NULL check on list iterator

In reply to Greg Kroah-Hartman

From: Xiaomeng Tong <[email protected]>

commit 0112f822f8a6d8039c94e0bc9b264d7ffc5d4704 upstream.

The bug is here:

	err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);

The list iterator value 'cdev' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found.

To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'cdev' as a dedicated pointer to point to the found element. And snd_card_cs423x_pnp() itself has NULL check for cdev.

Fixes c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection")
---
 sound/isa/cs423x/cs4236.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
sound/isa/cs423x/cs4236.c +5 -3
@@ -494,7 +494,7 @@ static int snd_cs423x_pnpbios_detect(str
 	static int dev;
 	int err;
 	struct snd_card *card;
-	struct pnp_dev *cdev;
+	struct pnp_dev *cdev, *iter;
 	char cid[PNP_ID_LEN];
 
 	if (pnp_device_is_isapnp(pdev))
@@ -510,9 +510,11 @@ static int snd_cs423x_pnpbios_detect(str
 	strcpy(cid, pdev->id[0].id);
 	cid[5] = '1';
 	cdev = NULL;
-	list_for_each_entry(cdev, &(pdev->protocol->devices), protocol_list) {
-		if (!strcmp(cdev->id[0].id, cid))
+	list_for_each_entry(iter, &(pdev->protocol->devices), protocol_list) {
+		if (!strcmp(iter->id[0].id, cid)) {
+			cdev = iter;
 			break;
+		}
 	}
 	err = snd_cs423x_card_new(&pdev->dev, dev, &card);
 	if (err < 0)
author maintainer
#97 lore raw

PATCH 97/1126 ALSA: hda: Avoid unsol event during RPM suspending

In reply to Greg Kroah-Hartman

From: Mohan Kumar <[email protected]>

commit 6ddc2f749621d5d45ca03edc9f0616bcda136d29 upstream.

There is a corner case with unsol event handling during codec runtime suspending state. When the codec runtime suspend call initiated, the codec->in_pm atomic variable would be 0, currently the codec runtime suspend function calls snd_hdac_enter_pm() which will just increments the codec->in_pm atomic variable. Consider unsol event happened just after this step and before snd_hdac_leave_pm() in the codec runtime suspend function. The snd_hdac_power_up_pm() in the unsol event flow in hdmi_present_sense_via_verbs() function would just increment the codec->in_pm atomic variable without calling pm_runtime_get_sync function.

As codec runtime suspend flow is already in progress and in parallel unsol event is also accessing the codec verbs, as soon as codec suspend flow completes and clocks are switched off before completing the unsol event handling as both functions doesn't wait for each other. This will result in below errors

[  589.428020] tegra-hda 3510000.hda: azx_get_response timeout, switching
to polling mode: last cmd=0x505f2f57
[  589.428344] tegra-hda 3510000.hda: spurious response 0x80000074:0x5,
last cmd=0x505f2f57
[  589.428547] tegra-hda 3510000.hda: spurious response 0x80000065:0x5,

last cmd=0x505f2f57

To avoid this, the unsol event flow should not perform any codec verb related operations during RPM_SUSPENDING state.

---
 sound/pci/hda/patch_hdmi.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/pci/hda/patch_hdmi.c +7 -1
@@ -1617,6 +1617,7 @@ static void hdmi_present_sense_via_verbs
 	struct hda_codec *codec = per_pin->codec;
 	struct hdmi_spec *spec = codec->spec;
 	struct hdmi_eld *eld = &spec->temp_eld;
+	struct device *dev = hda_codec_dev(codec);
 	hda_nid_t pin_nid = per_pin->pin_nid;
 	int dev_id = per_pin->dev_id;
 	/*
@@ -1630,8 +1631,13 @@ static void hdmi_present_sense_via_verbs
 	int present;
 	int ret;
 
+#ifdef	CONFIG_PM
+	if (dev->power.runtime_status == RPM_SUSPENDING)
+		return;
+#endif
+
 	ret = snd_hda_power_up_pm(codec);
-	if (ret < 0 && pm_runtime_suspended(hda_codec_dev(codec)))
+	if (ret < 0 && pm_runtime_suspended(dev))
 		goto out;
 
 	present = snd_hda_jack_pin_sense(codec, pin_nid, dev_id);
author maintainer
#98 lore raw

PATCH 98/1126 ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit bc55cfd5718c7c23e5524582e9fa70b4d10f2433 upstream.

syzbot caught a potential deadlock between the PCM runtime->buffer_mutex and the mm->mmap_lock. It was brought by the recent fix to cover the racy read/write and other ioctls, and in that commit, I overlooked a (hopefully only) corner case that may take the revert lock, namely, the OSS mmap. The OSS mmap operation exceptionally allows to re-configure the parameters inside the OSS mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the copy_from/to_user calls at read/write operations also take the mm->mmap_lock internally, hence it may lead to a AB/BA deadlock.

A similar problem was already seen in the past and we fixed it with a refcount (in commit b248371628aa). The former fix covered only the call paths with OSS read/write and OSS ioctls, while we need to cover the concurrent access via both ALSA and OSS APIs now.

This patch addresses the problem above by replacing the buffer_mutex lock in the read/write operations with a refcount similar as we've used for OSS. The new field, runtime->buffer_accessing, keeps the number of concurrent read/write operations. Unlike the former buffer_mutex protection, this protects only around the copy_from/to_user() calls; the other codes are basically protected by the PCM stream lock. The refcount can be a negative, meaning blocked by the ioctls. If a negative value is seen, the read/write aborts with -EBUSY. In the ioctl side, OTOH, they check this refcount, too, and set to a negative value for blocking unless it's already being accessed.

Reported-by [email protected]
Fixes dca947d4d26d ("ALSA: pcm: Fix races among concurrent read/write and buffer changes")
---
 include/sound/pcm.h     |    1 +
 sound/core/pcm.c        |    1 +
 sound/core/pcm_lib.c    |    9 +++++----
 sound/core/pcm_native.c |   39 ++++++++++++++++++++++++++++++++-------
 4 files changed, 39 insertions(+), 11 deletions(-)
include/sound/pcm.h +1 -0
@@ -402,6 +402,7 @@ struct snd_pcm_runtime {
 	struct fasync_struct *fasync;
 	bool stop_operating;		/* sync_stop will be called */
 	struct mutex buffer_mutex;	/* protect for buffer changes */
+	atomic_t buffer_accessing;	/* >0: in r/w operation, <0: blocked */
 
 	/* -- private section -- */
 	void *private_data;
sound/core/pcm.c +1 -0
@@ -970,6 +970,7 @@ int snd_pcm_attach_substream(struct snd_
 
 	runtime->status->state = SNDRV_PCM_STATE_OPEN;
 	mutex_init(&runtime->buffer_mutex);
+	atomic_set(&runtime->buffer_accessing, 0);
 
 	substream->runtime = runtime;
 	substream->private_data = pcm->private_data;
sound/core/pcm_lib.c +5 -4
@@ -1906,11 +1906,9 @@ static int wait_for_avail(struct snd_pcm
 		if (avail >= runtime->twake)
 			break;
 		snd_pcm_stream_unlock_irq(substream);
-		mutex_unlock(&runtime->buffer_mutex);
 
 		tout = schedule_timeout(wait_time);
 
-		mutex_lock(&runtime->buffer_mutex);
 		snd_pcm_stream_lock_irq(substream);
 		set_current_state(TASK_INTERRUPTIBLE);
 		switch (runtime->status->state) {
@@ -2221,7 +2219,6 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 
 	nonblock = !!(substream->f_flags & O_NONBLOCK);
 
-	mutex_lock(&runtime->buffer_mutex);
 	snd_pcm_stream_lock_irq(substream);
 	err = pcm_accessible_state(runtime);
 	if (err < 0)
@@ -2276,6 +2273,10 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 			err = -EINVAL;
 			goto _end_unlock;
 		}
+		if (!atomic_inc_unless_negative(&runtime->buffer_accessing)) {
+			err = -EBUSY;
+			goto _end_unlock;
+		}
 		snd_pcm_stream_unlock_irq(substream);
 		if (!is_playback)
 			snd_pcm_dma_buffer_sync(substream, SNDRV_DMA_SYNC_CPU);
@@ -2284,6 +2285,7 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 		if (is_playback)
 			snd_pcm_dma_buffer_sync(substream, SNDRV_DMA_SYNC_DEVICE);
 		snd_pcm_stream_lock_irq(substream);
+		atomic_dec(&runtime->buffer_accessing);
 		if (err < 0)
 			goto _end_unlock;
 		err = pcm_accessible_state(runtime);
@@ -2313,7 +2315,6 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
 	if (xfer > 0 && err >= 0)
 		snd_pcm_update_state(substream, runtime);
 	snd_pcm_stream_unlock_irq(substream);
-	mutex_unlock(&runtime->buffer_mutex);
 	return xfer > 0 ? (snd_pcm_sframes_t)xfer : err;
 }
 EXPORT_SYMBOL(__snd_pcm_lib_xfer);
sound/core/pcm_native.c +32 -7
@@ -685,6 +685,24 @@ static int snd_pcm_hw_params_choose(stru
 	return 0;
 }
 
+/* acquire buffer_mutex; if it's in r/w operation, return -EBUSY, otherwise
+ * block the further r/w operations
+ */
+static int snd_pcm_buffer_access_lock(struct snd_pcm_runtime *runtime)
+{
+	if (!atomic_dec_unless_positive(&runtime->buffer_accessing))
+		return -EBUSY;
+	mutex_lock(&runtime->buffer_mutex);
+	return 0; /* keep buffer_mutex, unlocked by below */
+}
+
+/* release buffer_mutex and clear r/w access flag */
+static void snd_pcm_buffer_access_unlock(struct snd_pcm_runtime *runtime)
+{
+	mutex_unlock(&runtime->buffer_mutex);
+	atomic_inc(&runtime->buffer_accessing);
+}
+
 #if IS_ENABLED(CONFIG_SND_PCM_OSS)
 #define is_oss_stream(substream)	((substream)->oss.oss)
 #else
@@ -695,14 +713,16 @@ static int snd_pcm_hw_params(struct snd_
 			     struct snd_pcm_hw_params *params)
 {
 	struct snd_pcm_runtime *runtime;
-	int err = 0, usecs;
+	int err, usecs;
 	unsigned int bits;
 	snd_pcm_uframes_t frames;
 
 	if (PCM_RUNTIME_CHECK(substream))
 		return -ENXIO;
 	runtime = substream->runtime;
-	mutex_lock(&runtime->buffer_mutex);
+	err = snd_pcm_buffer_access_lock(runtime);
+	if (err < 0)
+		return err;
 	snd_pcm_stream_lock_irq(substream);
 	switch (runtime->status->state) {
 	case SNDRV_PCM_STATE_OPEN:
@@ -820,7 +840,7 @@ static int snd_pcm_hw_params(struct snd_
 			snd_pcm_lib_free_pages(substream);
 	}
  unlock:
-	mutex_unlock(&runtime->buffer_mutex);
+	snd_pcm_buffer_access_unlock(runtime);
 	return err;
 }
 
@@ -865,7 +885,9 @@ static int snd_pcm_hw_free(struct snd_pc
 	if (PCM_RUNTIME_CHECK(substream))
 		return -ENXIO;
 	runtime = substream->runtime;
-	mutex_lock(&runtime->buffer_mutex);
+	result = snd_pcm_buffer_access_lock(runtime);
+	if (result < 0)
+		return result;
 	snd_pcm_stream_lock_irq(substream);
 	switch (runtime->status->state) {
 	case SNDRV_PCM_STATE_SETUP:
@@ -884,7 +906,7 @@ static int snd_pcm_hw_free(struct snd_pc
 	snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
 	cpu_latency_qos_remove_request(&substream->latency_pm_qos_req);
  unlock:
-	mutex_unlock(&runtime->buffer_mutex);
+	snd_pcm_buffer_access_unlock(runtime);
 	return result;
 }
 
@@ -1369,12 +1391,15 @@ static int snd_pcm_action_nonatomic(cons
 
 	/* Guarantee the group members won't change during non-atomic action */
 	down_read(&snd_pcm_link_rwsem);
-	mutex_lock(&substream->runtime->buffer_mutex);
+	res = snd_pcm_buffer_access_lock(substream->runtime);
+	if (res < 0)
+		goto unlock;
 	if (snd_pcm_stream_linked(substream))
 		res = snd_pcm_action_group(ops, substream, state, false);
 	else
 		res = snd_pcm_action_single(ops, substream, state);
-	mutex_unlock(&substream->runtime->buffer_mutex);
+	snd_pcm_buffer_access_unlock(substream->runtime);
+ unlock:
 	up_read(&snd_pcm_link_rwsem);
 	return res;
 }