Enable rk356x PCIe controller
PATCH v4 1/4 arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10
In reply to Peter GeisFrom: Michael Riesch <[email protected]>
The Rockchip RK3568 EVB1 features one USB 3.0 device-only (USB 2.0 OTG) port and one USB 3.0 host-only port. Activate the USB 3.0 controller nodes and phy nodes in the device tree.
--- .../boot/dts/rockchip/rk3568-evb1-v10.dts | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+)
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +46 -0
@@ -103,6 +103,18 @@ vcc5v0_usb_host: vcc5v0-usb-host { vin-supply = <&vcc5v0_usb>; }; + vcc5v0_usb_otg: vcc5v0-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n";
@@ -136,6 +148,14 @@ regulator-state-mem { }; }; +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; };
@@ -507,6 +527,9 @@ usb { vcc5v0_usb_host_en: vcc5v0_usb_host_en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; };
@@ -568,6 +591,11 @@ &usb_host0_ohci { status = "okay"; }; +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + &usb_host1_ehci { status = "okay"; };
@@ -576,6 +604,24 @@ &usb_host1_ohci { status = "okay"; }; +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + vbus-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + &usb2phy1 { status = "okay"; };
Signature · 1 line
2.25.1
v4 cover Enable rk356x PCIe controller
This series enables the DesignWare based PCIe controller on the rk356x series of chips.
We drop the fallback to the core driver due to compatibility issues. We add support for legacy interrupts for cards that lack MSI support (which is partially broken currently).
We then add the device tree nodes to enable PCIe on the Quartz64 Model A.
Patch 1 drops the snps,dw,pcie fallback from the dt-binding Patch 2 adds legacy interrupt support to the driver Patch 3 adds the device tree binding to the rk356x.dtsi Patch 4 enables the PCIe controller on the Quartz64-A
Changelog:
v4:
- drop the ITS modification, poor compatibility is better than completely broken
v3:
- drop select node from dt-binding
- convert to for_each_set_bit
- convert to generic_handle_domain_irq
- drop unncessary dev_err
- reorder irq_chip items
- change to level_irq
- install the handler after initializing the domain
v2:
- Define PCIE_CLIENT_INTR_STATUS_LEGACY
- Fix PCIE_LEGACY_INT_ENABLE to only enable the RC interrupts
- Add legacy interrupt enable/disable support
Michael Riesch (1):
arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10
Peter Geis (3):
dt-bindings: pci: remove fallback from Rockchip DesignWare binding
PCI: dwc: rockchip: add legacy interrupt support
arm64: dts: rockchip: add rk3568 pcie2x1 controller
.../bindings/pci/rockchip-dw-pcie.yaml | 12 +- .../boot/dts/rockchip/rk3568-evb1-v10.dts | 46 +++++++ arch/arm64/boot/dts/rockchip/rk356x.dtsi | 55 +++++++++ drivers/pci/controller/dwc/pcie-dw-rockchip.c | 112 +++++++++++++++++- 4 files changed, 212 insertions(+), 13 deletions(-)
Signature · 1 line
2.25.1
PATCH v4 2/4 dt-bindings: pci: remove fallback from Rockchip DesignWare binding
The snps,dw-pcie binds to a standalone driver.
It is not fully compatible with the Rockchip implementation and causes a hang if it binds to the device.
Remove this binding as a valid fallback.
--- .../devicetree/bindings/pci/rockchip-dw-pcie.yaml | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +1 -11
@@ -19,20 +19,10 @@ description: |+ allOf: - $ref: /schemas/pci/pci-bus.yaml# -# We need a select here so we don't match all nodes with 'snps,dw-pcie' -select: - properties: - compatible: - contains: - const: rockchip,rk3568-pcie - required: - - compatible - properties: compatible: items: - const: rockchip,rk3568-pcie - - const: snps,dw-pcie reg: items:
@@ -110,7 +100,7 @@ examples: #size-cells = <2>; pcie3x2: pcie@fe280000 { - compatible = "rockchip,rk3568-pcie", "snps,dw-pcie"; + compatible = "rockchip,rk3568-pcie"; reg = <0x3 0xc0800000 0x0 0x390000>, <0x0 0xfe280000 0x0 0x10000>, <0x3 0x80000000 0x0 0x100000>;
Signature · 1 line
2.25.1
PATCH v4 3/4 PCI: dwc: rockchip: add legacy interrupt support
In reply to Peter GeisThe legacy interrupts on the rk356x pcie controller are handled by a single muxed interrupt. Add irq domain support to the pcie-dw-rockchip driver to support the virtual domain.
--- drivers/pci/controller/dwc/pcie-dw-rockchip.c | 112 +++++++++++++++++- 1 file changed, 110 insertions(+), 2 deletions(-)
drivers/pci/controller/dwc/pcie-dw-rockchip.c +110 -2
@@ -10,9 +10,12 @@#include <linux/clk.h> #include <linux/gpio/consumer.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdomain.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regmap.h>
@@ -36,10 +39,13 @@#define PCIE_LINKUP (PCIE_SMLH_LINKUP | PCIE_RDLH_LINKUP)#define PCIE_L0S_ENTRY 0x11#define PCIE_CLIENT_GENERAL_CONTROL 0x0 +#define PCIE_CLIENT_INTR_STATUS_LEGACY 0x8 +#define PCIE_CLIENT_INTR_MASK_LEGACY 0x1c#define PCIE_CLIENT_GENERAL_DEBUG 0x104 -#define PCIE_CLIENT_HOT_RESET_CTRL 0x180 +#define PCIE_CLIENT_HOT_RESET_CTRL 0x180#define PCIE_CLIENT_LTSSM_STATUS 0x300 -#define PCIE_LTSSM_ENABLE_ENHANCE BIT(4) +#define PCIE_LEGACY_INT_ENABLE GENMASK(3, 0) +#define PCIE_LTSSM_ENABLE_ENHANCE BIT(4)#define PCIE_LTSSM_STATUS_MASK GENMASK(5, 0)struct rockchip_pcie {
@@ -51,6 +57,8 @@ struct rockchip_pcie {struct reset_control *rst;struct gpio_desc *rst_gpio;struct regulator *vpcie3v3; +struct irq_domain *irq_domain; +raw_spinlock_t irq_lock; }; static int rockchip_pcie_readl_apb(struct rockchip_pcie *rockchip,
@@ -65,6 +73,94 @@ static void rockchip_pcie_writel_apb(struct rockchip_pcie *rockchip,writel_relaxed (val, rockchip->apb_base + reg); } +static void rockchip_pcie_legacy_int_handler (struct irq_desc *desc) +{ +struct irq_chip *chip =irq_desc_get_chip (desc); +struct rockchip_pcie *rockchip =irq_desc_get_handler_data (desc); +unsigned long reg, hwirq; + +chained_irq_enter (chip, desc); + + reg =rockchip_pcie_readl_apb (rockchip,PCIE_CLIENT_INTR_STATUS_LEGACY ); + +for_each_set_bit (hwirq, ®,8 ) +generic_handle_domain_irq (rockchip->irq_domain, hwirq); + +chained_irq_exit (chip, desc); +} + +static void rockchip_intx_mask (struct irq_data *data) +{ +struct rockchip_pcie *rockchip =irq_data_get_irq_chip_data (data); +unsigned long flags; +u32 val; + +/* disable legacy interrupts */ +raw_spin_lock_irqsave (&rockchip->irq_lock, flags); + val =HIWORD_UPDATE_BIT (PCIE_LEGACY_INT_ENABLE ); + val |=PCIE_LEGACY_INT_ENABLE ; +rockchip_pcie_writel_apb (rockchip, val,PCIE_CLIENT_INTR_MASK_LEGACY ); +raw_spin_unlock_irqrestore (&rockchip->irq_lock, flags); +}; + +static void rockchip_intx_unmask (struct irq_data *data) +{ +struct rockchip_pcie *rockchip =irq_data_get_irq_chip_data (data); +unsigned long flags; +u32 val; + +/* enable legacy interrupts */ +raw_spin_lock_irqsave (&rockchip->irq_lock, flags); + val =HIWORD_UPDATE_BIT (PCIE_LEGACY_INT_ENABLE ); + val &= ~PCIE_LEGACY_INT_ENABLE ; +rockchip_pcie_writel_apb (rockchip, val,PCIE_CLIENT_INTR_MASK_LEGACY ); +raw_spin_unlock_irqrestore (&rockchip->irq_lock, flags); +}; + +static struct irq_chip rockchip_intx_irq_chip = { + .name ="INTx" , + .irq_mask = rockchip_intx_mask, + .irq_unmask = rockchip_intx_unmask, + .flags =IRQCHIP_SKIP_SET_WAKE |IRQCHIP_MASK_ON_SUSPEND , +}; + +static int rockchip_pcie_intx_map (struct irq_domain *domain,unsigned int irq, +irq_hw_number_t hwirq) +{ +irq_set_chip_and_handler (irq, &rockchip_intx_irq_chip, handle_level_irq); +irq_set_chip_data (irq, domain->host_data); + +return 0 ; +} + +static const struct irq_domain_ops intx_domain_ops = { + .map = rockchip_pcie_intx_map, +}; + +static int rockchip_pcie_init_irq_domain (struct rockchip_pcie *rockchip) +{ +struct device *dev = rockchip->pci.dev; +struct device_node *intc; + +raw_spin_lock_init (&rockchip->irq_lock); + + intc =of_get_child_by_name (dev->of_node,"legacy-interrupt-controller" ); +if (!intc) { +dev_err (dev,"missing child interrupt-controller node\n" ); +return -EINVAL ; + } + + rockchip->irq_domain =irq_domain_add_linear (intc,PCI_NUM_INTX , + &intx_domain_ops, rockchip); +of_node_put (intc); +if (!rockchip->irq_domain) { +dev_err (dev,"failed to get a INTx IRQ domain\n" ); +return -EINVAL ; + } + +return 0 ; +} +static void rockchip_pcie_enable_ltssm (struct rockchip_pcie *rockchip) { rockchip_pcie_writel_apb(rockchip, PCIE_CLIENT_ENABLE_LTSSM,
@@ -111,7 +207,19 @@ static int rockchip_pcie_host_init(struct pcie_port *pp) {struct dw_pcie *pci =to_dw_pcie_from_pp (pp);struct rockchip_pcie *rockchip =to_rockchip_pcie (pci); +struct device *dev = rockchip->pci.dev;u32 val =HIWORD_UPDATE_BIT (PCIE_LTSSM_ENABLE_ENHANCE ); +int irq, ret; + + irq =of_irq_get_byname (dev->of_node,"legacy" ); +if (irq <0 ) +return irq; + + ret =rockchip_pcie_init_irq_domain (rockchip); +if (ret <0 ) +dev_err (dev,"failed to init irq domain\n" ); + +irq_set_chained_handler_and_data (irq, rockchip_pcie_legacy_int_handler, rockchip);/* LTSSM enable control mode */ rockchip_pcie_writel_apb (rockchip, val,PCIE_CLIENT_HOT_RESET_CTRL );
Signature · 1 line
2.25.1
PATCH v4 4/4 arm64: dts: rockchip: add rk3568 pcie2x1 controller
In reply to Peter GeisThe pcie2x1 controller is common between the rk3568 and rk3566. It is a single lane pcie2 compliant controller.
--- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 55 ++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
arch/arm64/boot/dts/rockchip/rk356x.dtsi +55 -0
@@ -722,6 +722,61 @@ qos_vop_m1: qos@fe1a8100 { reg = <0x0 0xfe1a8100 0x0 0x20>; }; + pcie2x1: pcie@fe260000 { + compatible = "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + assigned-clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, + <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, + <&cru CLK_PCIE20_AUX_NDFT>; + clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, + <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, + <&cru CLK_PCIE20_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msi", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + linux,pci-domain = <0>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <2>; + msi-map = <0x0 &its 0x0 0x1000>; + num-lanes = <1>; + phys = <&combphy2 PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + reg = <0x3 0xc0000000 0x0 0x00400000>, + <0x0 0xfe260000 0x0 0x00010000>, + <0x3 0x00000000 0x0 0x01000000>; + ranges = <0x01000000 0x0 0x01000000 0x3 0x01000000 0x0 0x00100000 + 0x02000000 0x0 0x02000000 0x3 0x02000000 0x0 0x3e000000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE20_POWERUP>; + reset-names = "pipe"; + status = "disabled"; + + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; + + }; + sdmmc0: mmc@fe2b0000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe2b0000 0x0 0x4000>;
Signature · 1 line
2.25.1