Skip to contentSkip to conversation

ARM: dts: imx6sl: Add a label for the cpu node

PATCH Applied Fabio Estevam 2 participants 2 messages Apr 22, 2022 – May 5, 2022

Subsystems (2)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx6sl: Add a label for the cpu node

Add a label for the cpu node, so that board devicetree files can reference to the CPU node.

This is useful for describing a PMIC voltage that supplies the CPU voltage.

For example:

&cpu0 {
	cpu-supply = <&sw1_reg>;
---
 arch/arm/boot/dts/imx6sl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx6sl.dtsi +1 -1
index c7d907c5c352..06a515121dfc 100644
@@ -50,7 +50,7 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0x0>;
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Applied
#1 lore raw
Quoted 6 lines · Fabio Estevam

Add a label for the cpu node, so that board devicetree files can reference to the CPU node.

This is useful for describing a PMIC voltage that supplies the CPU voltage.

Quoted 6 lines

For example:

&cpu0 {
	cpu-supply = <&sw1_reg>;

Applied, thanks!

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel