arm: socfpga: Add the terasic de10-standard board
Subsystems (3)
PATCH 1/1 arm: socfpga: Add the terasic de10-standard board
Used the de10-nano files as templates for the de10-standard board. Changed the iocsr_config.h and pinmux_config.h based on the handoff files generated by quartus. Finally, the pll_config.h was copied from the altera cyclone5-socdk board.
--- .../dts/socfpga_cyclone5_de10_standard.dts | 86 +++ arch/arm/mach-socfpga/Kconfig | 7 + board/terasic/de10-standard/MAINTAINERS | 5 + board/terasic/de10-standard/Makefile | 6 + .../terasic/de10-standard/qts/iocsr_config.h | 659 ++++++++++++++++++ .../terasic/de10-standard/qts/pinmux_config.h | 218 ++++++ board/terasic/de10-standard/qts/pll_config.h | 84 +++ .../terasic/de10-standard/qts/sdram_config.h | 343 +++++++++ board/terasic/de10-standard/socfpga.c | 5 + configs/socfpga_de10_standard_defconfig | 66 ++ include/configs/socfpga_de10_standard.h | 16 + 11 files changed, 1495 insertions(+) create mode 100644 arch/arm/dts/socfpga_cyclone5_de10_standard.dts create mode 100644 board/terasic/de10-standard/MAINTAINERS create mode 100644 board/terasic/de10-standard/Makefile create mode 100644 board/terasic/de10-standard/qts/iocsr_config.h create mode 100644 board/terasic/de10-standard/qts/pinmux_config.h create mode 100644 board/terasic/de10-standard/qts/pll_config.h create mode 100644 board/terasic/de10-standard/qts/sdram_config.h create mode 100644 board/terasic/de10-standard/socfpga.c create mode 100644 configs/socfpga_de10_standard_defconfig create mode 100644 include/configs/socfpga_de10_standard.h
arch/arm/dts/socfpga_cyclone5_de10_standard.dts new file +86 -0
@@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017, Intel Corporation + * + * based on socfpga_cyclone5_de10_nano.dts + */ + +#include "socfpga_cyclone5.dtsi" +#include "socfpga-common-u-boot.dtsi" + +/ { + model = "Terasic DE10-Standard"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &gmac1; + udc0 = &usb1; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + txen-skew-ps = <0>; + txc-skew-ps = <1860>; + rxdv-skew-ps = <420>; + rxc-skew-ps = <1680>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&porta { + bank-name = "porta"; +}; + +&portb { + bank-name = "portb"; +}; + +&portc { + bank-name = "portc"; +}; + +&mmc0 { + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&usb1 { + status = "okay"; +}; + +&uart0 { + clock-frequency = <100000000>; + u-boot,dm-pre-reloc; +}; + +&watchdog0 { + status = "disabled"; +};
arch/arm/mach-socfpga/Kconfig +7 -0
@@ -180,6 +180,10 @@ config TARGET_SOCFPGA_TERASIC_DE10_NANO bool "Terasic DE10-Nano (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5 +config TARGET_SOCFPGA_TERASIC_DE10_STANDARD + bool "Terasic DE10-Standard (Cyclone V)" + select TARGET_SOCFPGA_CYCLONE5 + config TARGET_SOCFPGA_TERASIC_DE1_SOC bool "Terasic DE1-SoC (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5
@@ -199,6 +203,7 @@ config SYS_BOARD default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO + default "de10-standard" if TARGET_SOCFPGA_TERASIC_DE10_STANDARD default "is1" if TARGET_SOCFPGA_IS1 default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK default "n5x-socdk" if TARGET_SOCFPGA_N5X_SOCDK
@@ -224,6 +229,7 @@ config SYS_VENDOR default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "terasic" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_NANO + default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_STANDARD default "terasic" if TARGET_SOCFPGA_TERASIC_SOCKIT config SYS_SOC
@@ -239,6 +245,7 @@ config SYS_CONFIG_NAME default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "socfpga_de10_nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO + default "socfpga_de10_standard" if TARGET_SOCFPGA_TERASIC_DE10_STANDARD default "socfpga_is1" if TARGET_SOCFPGA_IS1 default "socfpga_mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK default "socfpga_n5x_socdk" if TARGET_SOCFPGA_N5X_SOCDK
board/terasic/de10-standard/MAINTAINERS new file +5 -0
@@ -0,0 +1,5 @@ +DE10-STANDARD BOARD +M: Humberto Naves <[email protected]> +S: Maintained +F: include/configs/socfpga_de10_standard.h +F: configs/socfpga_de10_standard_defconfig
board/terasic/de10-standard/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2017, Intel Corporation +# +# + +obj-y := socfpga.o
board/terasic/de10-standard/qts/iocsr_config.h new file +659 -0
659 lines not on this page · raw message
board/terasic/de10-standard/qts/pinmux_config.h new file +218 -0
218 lines not on this page · raw message
board/terasic/de10-standard/qts/pll_config.h new file +84 -0
84 lines not on this page · raw message
board/terasic/de10-standard/qts/sdram_config.h new file +343 -0
343 lines not on this page · raw message
board/terasic/de10-standard/socfpga.c new file +5 -0
@@ -0,0 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2017, Intel Corporation +*/ +#include <common.h>
configs/socfpga_de10_standard_defconfig new file +66 -0
66 lines not on this page · raw message
include/configs/socfpga_de10_standard.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2017, Intel Corporation +*/ +#ifndef __CONFIG_TERASIC_DE10_STANDARD_H__ +#define __CONFIG_TERASIC_DE10_STANDARD_H__ + +#include <asm/arch/base_addr_ac5.h> + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000/* 1GiB */ + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_TERASIC_DE10_STANDARD_H__ */
Signature · 1 line
2.36.1
Quoted 4 lines · Humberto Naves
Used the de10-nano files as templates for the de10-standard board. Changed the
iocsr_config.handpinmux_config.hbased on the handoff files generated by quartus. Finally, thepll_config.hwas copied from the altera cyclone5-socdk board.
Doesn't the PLL config also come from quartus ? It should all come from it. See doc/README.socfpga
Quoted 2 lines
Signed-off-by Humberto Naves <[email protected]>Cc Marek Vasut <[email protected]>
I think a lot of those board/config-specific copyright messages could use an update, I think they should be assigned to you. Please do a quick V2 with that change. Besides that:
Quoted 1 line · Humberto Naves
Hi Marek,
Hi,
Quoted 7 lines
Thanks for the quick review!
Quoted 2 lines
Doesn't the PLL config also come from quartus ? It should all come from it. See doc/README.socfpga
My mistake, I will update the patch using all the files created by the bsp-create-settings.
Thanks
Quoted 7 lines
Quoted 3 lines
I think a lot of those board/config-specific copyright messages could use an update, I think they should be assigned to you. Please do a quick V2 with that change. Besides that:
Please advise what I should do there. For this particular board I adapted the code from the de10-nano board, which already had these copyright messages.
I'm not a lawyer. Maybe the most safe approach is to keep the original copyright and add your own in addition to it ?
Hi Marek,
Thanks for the quick review!
Quoted 2 lines
Doesn't the PLL config also come from quartus ? It should all come from it. See doc/README.socfpga
My mistake, I will update the patch using all the files created by the bsp-create-settings.
Quoted 3 lines
I think a lot of those board/config-specific copyright messages could use an update, I think they should be assigned to you. Please do a quick V2 with that change. Besides that:
Please advise what I should do there. For this particular board I adapted the code from the de10-nano board, which already had these copyright messages.
Best regards,
Quoted 18 lines · Marek Vasut
Quoted 4 lines · Humberto Naves
Used the de10-nano files as templates for the de10-standard board. Changed the
iocsr_config.handpinmux_config.hbased on the handoff files generated by quartus. Finally, thepll_config.hwas copied from the altera cyclone5-socdk board.Doesn't the PLL config also come from quartus ? It should all come from it. See doc/README.socfpga
Quoted 2 lines
Signed-off-by Humberto Naves <[email protected]>Cc Marek Vasut <[email protected]>I think a lot of those board/config-specific copyright messages could use an update, I think they should be assigned to you. Please do a quick V2 with that change. Besides that:
Reviewed-by Marek Vasut <[email protected]>
PATCH v2 1/1 arm: socfpga: Add the terasic de10-standard board
In reply to Marek VasutUse the de10-nano files as templates for the de10-standard board. The files in qts directory are generated by quartus from the GHRD design.
---
Changes for v2:
- Also use generated sdram_config.h from bsp-create-settings
- Update the copyright messages (for substantial changes)
--- .../dts/socfpga_cyclone5_de10_standard.dts | 86 +++ arch/arm/mach-socfpga/Kconfig | 7 + board/terasic/de10-standard/MAINTAINERS | 5 + board/terasic/de10-standard/Makefile | 6 + .../terasic/de10-standard/qts/iocsr_config.h | 659 ++++++++++++++++++ .../terasic/de10-standard/qts/pinmux_config.h | 218 ++++++ board/terasic/de10-standard/qts/pll_config.h | 84 +++ .../terasic/de10-standard/qts/sdram_config.h | 344 +++++++++ board/terasic/de10-standard/socfpga.c | 5 + configs/socfpga_de10_standard_defconfig | 66 ++ include/configs/socfpga_de10_standard.h | 18 + 11 files changed, 1498 insertions(+) create mode 100644 arch/arm/dts/socfpga_cyclone5_de10_standard.dts create mode 100644 board/terasic/de10-standard/MAINTAINERS create mode 100644 board/terasic/de10-standard/Makefile create mode 100644 board/terasic/de10-standard/qts/iocsr_config.h create mode 100644 board/terasic/de10-standard/qts/pinmux_config.h create mode 100644 board/terasic/de10-standard/qts/pll_config.h create mode 100644 board/terasic/de10-standard/qts/sdram_config.h create mode 100644 board/terasic/de10-standard/socfpga.c create mode 100644 configs/socfpga_de10_standard_defconfig create mode 100644 include/configs/socfpga_de10_standard.h
arch/arm/dts/socfpga_cyclone5_de10_standard.dts new file +86 -0
@@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017, Intel Corporation + * + * Adapted from socfpga_cyclone5_de10_nano.dts + */ + +#include "socfpga_cyclone5.dtsi" +#include "socfpga-common-u-boot.dtsi" + +/ { + model = "Terasic DE10-Standard"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &gmac1; + udc0 = &usb1; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + txen-skew-ps = <0>; + txc-skew-ps = <1860>; + rxdv-skew-ps = <420>; + rxc-skew-ps = <1680>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&porta { + bank-name = "porta"; +}; + +&portb { + bank-name = "portb"; +}; + +&portc { + bank-name = "portc"; +}; + +&mmc0 { + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&usb1 { + status = "okay"; +}; + +&uart0 { + clock-frequency = <100000000>; + u-boot,dm-pre-reloc; +}; + +&watchdog0 { + status = "disabled"; +};
arch/arm/mach-socfpga/Kconfig +7 -0
@@ -180,6 +180,10 @@ config TARGET_SOCFPGA_TERASIC_DE10_NANO bool "Terasic DE10-Nano (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5 +config TARGET_SOCFPGA_TERASIC_DE10_STANDARD + bool "Terasic DE10-Standard (Cyclone V)" + select TARGET_SOCFPGA_CYCLONE5 + config TARGET_SOCFPGA_TERASIC_DE1_SOC bool "Terasic DE1-SoC (Cyclone V)" select TARGET_SOCFPGA_CYCLONE5
@@ -199,6 +203,7 @@ config SYS_BOARD default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO + default "de10-standard" if TARGET_SOCFPGA_TERASIC_DE10_STANDARD default "is1" if TARGET_SOCFPGA_IS1 default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK default "n5x-socdk" if TARGET_SOCFPGA_N5X_SOCDK
@@ -224,6 +229,7 @@ config SYS_VENDOR default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "terasic" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_NANO + default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_STANDARD default "terasic" if TARGET_SOCFPGA_TERASIC_SOCKIT config SYS_SOC
@@ -239,6 +245,7 @@ config SYS_CONFIG_NAME default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC default "socfpga_de10_nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO + default "socfpga_de10_standard" if TARGET_SOCFPGA_TERASIC_DE10_STANDARD default "socfpga_is1" if TARGET_SOCFPGA_IS1 default "socfpga_mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK default "socfpga_n5x_socdk" if TARGET_SOCFPGA_N5X_SOCDK
board/terasic/de10-standard/MAINTAINERS new file +5 -0
@@ -0,0 +1,5 @@ +DE10-STANDARD BOARD +M: Humberto Naves <[email protected]> +S: Maintained +F: include/configs/socfpga_de10_standard.h +F: configs/socfpga_de10_standard_defconfig
board/terasic/de10-standard/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (C) 2017, Intel Corporation +# +# + +obj-y := socfpga.o
board/terasic/de10-standard/qts/iocsr_config.h new file +659 -0
659 lines not on this page · raw message
board/terasic/de10-standard/qts/pinmux_config.h new file +218 -0
218 lines not on this page · raw message
board/terasic/de10-standard/qts/pll_config.h new file +84 -0
84 lines not on this page · raw message
board/terasic/de10-standard/qts/sdram_config.h new file +344 -0
344 lines not on this page · raw message
board/terasic/de10-standard/socfpga.c new file +5 -0
@@ -0,0 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2017, Intel Corporation +*/ +#include <common.h>
configs/socfpga_de10_standard_defconfig new file +66 -0
66 lines not on this page · raw message
include/configs/socfpga_de10_standard.h new file +18 -0
@@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2022, Humberto Naves <[email protected]> +* +* Adapted from socfpga_de0_nano_soc.h +*/ +#ifndef __CONFIG_TERASIC_DE10_STANDARD_H__ +#define __CONFIG_TERASIC_DE10_STANDARD_H__ + +#include <asm/arch/base_addr_ac5.h> + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000/* 1GiB */ + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_TERASIC_DE10_STANDARD_H__ */
Signature · 1 line
2.36.1
Marek Vasut
AppliedQuoted 3 lines · Humberto Naves
Use the de10-nano files as templates for the de10-standard board. The files in qts directory are generated by quartus from the GHRD design.
Applied, thanks.
Thank you!
Quoted 7 lines · Marek Vasut
Quoted 3 lines · Humberto Naves
Use the de10-nano files as templates for the de10-standard board. The files in qts directory are generated by quartus from the GHRD design.
Applied, thanks.