Skip to contentSkip to conversation

ice: Fix queue config fail handling

PATCH In review Mateusz Palczewski 2 participants 2 messages Jun 2, 2022 – Jun 14, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 ice: Fix queue config fail handling

From: Przemyslaw Patynowski <[email protected]>

Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config.
In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured.

Fixes 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")

---
v2: Edit commit msg to have additional informations, add missing fixes tag
---

 drivers/net/ethernet/intel/ice/ice_virtchnl.c | 53 +++++++++----------
 1 file changed, 26 insertions(+), 27 deletions(-)
drivers/net/ethernet/intel/ice/ice_virtchnl.c +26 -27
index 1d9b84c..4547bc1 100644
@@ -1569,35 +1569,27 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg)
  */
 static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg)
 {
-	enum virtchnl_status_code v_ret = VIRTCHNL_STATUS_SUCCESS;
 	struct virtchnl_vsi_queue_config_info *qci =
 	    (struct virtchnl_vsi_queue_config_info *)msg;
 	struct virtchnl_queue_pair_info *qpi;
 	struct ice_pf *pf = vf->pf;
 	struct ice_vsi *vsi;
-	int i, q_idx;
+	int i = -1, q_idx;
 
-	if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states)) {
-		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+	if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states))
 		goto error_param;
-	}
 
-	if (!ice_vc_isvalid_vsi_id(vf, qci->vsi_id)) {
-		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+	if (!ice_vc_isvalid_vsi_id(vf, qci->vsi_id))
 		goto error_param;
-	}
 
 	vsi = ice_get_vf_vsi(vf);
-	if (!vsi) {
-		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+	if (!vsi)
 		goto error_param;
-	}
 
 	if (qci->num_queue_pairs > ICE_MAX_RSS_QS_PER_VF ||
 	    qci->num_queue_pairs > min_t(u16, vsi->alloc_txq, vsi->alloc_rxq)) {
 		dev_err(ice_pf_to_dev(pf), "VF-%d requesting more than supported number of queues: %d\n",
 			vf->vf_id, min_t(u16, vsi->alloc_txq, vsi->alloc_rxq));
-		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
 		goto error_param;
 	}
 
@@ -1610,7 +1602,6 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg)
 		    !ice_vc_isvalid_ring_len(qpi->txq.ring_len) ||
 		    !ice_vc_isvalid_ring_len(qpi->rxq.ring_len) ||
 		    !ice_vc_isvalid_q_id(vf, qci->vsi_id, qpi->txq.queue_id)) {
-			v_ret = VIRTCHNL_STATUS_ERR_PARAM;
 			goto error_param;
 		}
 
@@ -1620,7 +1611,6 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg)
 		 * for selected "vsi"
 		 */
 		if (q_idx >= vsi->alloc_txq || q_idx >= vsi->alloc_rxq) {
-			v_ret = VIRTCHNL_STATUS_ERR_PARAM;
 			goto error_param;
 		}
 
@@ -1630,14 +1620,13 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg)
 			vsi->tx_rings[i]->count = qpi->txq.ring_len;
 
 			/* Disable any existing queue first */
-			if (ice_vf_vsi_dis_single_txq(vf, vsi, q_idx)) {
-				v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+			if (ice_vf_vsi_dis_single_txq(vf, vsi, q_idx))
 				goto error_param;
-			}
 
 			/* Configure a queue with the requested settings */
 			if (ice_vsi_cfg_single_txq(vsi, vsi->tx_rings, q_idx)) {
-				v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+				dev_warn(ice_pf_to_dev(pf), "VF-%d failed to configure TX queue %d\n",
+					 vf->vf_id, i);
 				goto error_param;
 			}
 		}
@@ -1651,17 +1640,13 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg)
 
 			if (qpi->rxq.databuffer_size != 0 &&
 			    (qpi->rxq.databuffer_size > ((16 * 1024) - 128) ||
-			     qpi->rxq.databuffer_size < 1024)) {
-				v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+			     qpi->rxq.databuffer_size < 1024))
 				goto error_param;
-			}
 			vsi->rx_buf_len = qpi->rxq.databuffer_size;
 			vsi->rx_rings[i]->rx_buf_len = vsi->rx_buf_len;
 			if (qpi->rxq.max_pkt_size > max_frame_size ||
-			    qpi->rxq.max_pkt_size < 64) {
-				v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+			    qpi->rxq.max_pkt_size < 64)
 				goto error_param;
-			}
 
 			vsi->max_frame = qpi->rxq.max_pkt_size;
 			/* add space for the port VLAN since the VF driver is
@@ -1672,16 +1657,30 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg)
 				vsi->max_frame += VLAN_HLEN;
 
 			if (ice_vsi_cfg_single_rxq(vsi, q_idx)) {
-				v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+				dev_warn(ice_pf_to_dev(pf), "VF-%d failed to configure RX queue %d\n",
+					 vf->vf_id, i);
 				goto error_param;
 			}
 		}
 	}
 
+	/* send the response to the VF */
+	return ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_CONFIG_VSI_QUEUES,
+				     VIRTCHNL_STATUS_SUCCESS, NULL, 0);
 error_param:
+	/* disable whatever we can */
+	for (; i >= 0; i--) {
+		if (ice_vsi_ctrl_one_rx_ring(vsi, false, i, true))
+			dev_err(ice_pf_to_dev(pf), "VF-%d could not disable RX queue %d\n",
+				vf->vf_id, i);
+		if (ice_vf_vsi_dis_single_txq(vf, vsi, i))
+			dev_err(ice_pf_to_dev(pf), "VF-%d could not disable TX queue %d\n",
+				vf->vf_id, i);
+	}
+
 	/* send the response to the VF */
-	return ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_CONFIG_VSI_QUEUES, v_ret,
-				     NULL, 0);
+	return ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_CONFIG_VSI_QUEUES,
+				     VIRTCHNL_STATUS_ERR_PARAM, NULL, 0);
 }
 
 /**
Signature · 6 lines
2.27.0

_______________________________________________
Intel-wired-lan mailing list
[email protected]
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
Tested-by on v2 1/2
#1 lore raw
Quoted 41 lines

-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Mateusz Palczewski
Sent: Thursday, June 2, 2022 12:09 PM
To: [email protected]
Cc: Laba, SlawomirX <[email protected]>; Patynowski, PrzemyslawX <[email protected]>
Subject: [Intel-wired-lan] [PATCH net v2 1/2] ice: Fix queue config fail handling

From: Przemyslaw Patynowski <[email protected]>

Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config.
In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured.

Fixes 77ca27c41705 ("ice: add support for

virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Przemyslaw Patynowski
<[email protected]>

---
v2: Edit commit msg to have additional informations, add missing fixes tag

---
 drivers/net/ethernet/intel/ice/ice_virtchnl.c | 53 +++++++++----------
 1 file changed, 26 insertions(+), 27 deletions(-)
drivers/net/ethernet/intel/ice/ice_virtchnl.c +0 -0
index 1d9b84c..4547bc1 100644

drivers/net/ethernet/intel/ice/ice_virtchnl.c static int ice_vc_cfg_irq_map_msg(struct · line 1569

Quoted 1 line
drivers/net/ethernet/intel/ice/ice_virtchnl.c +0 -0
@@ -1569,35 +1569,27 @@ static int ice_vc_cfg_irq_map_msg(struct
 ice_vf *vf, u8 *msg)

_______________________________________________
Intel-wired-lan mailing list
[email protected]
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan