Skip to contentSkip to conversation

AIA draft v0.3.0 support for QEMU RISC-V

PATCH Applied Anup Patel 2 participants 6 messages Jun 16, 2022 – Jun 30, 2022 RISC-V

lore
Share & tools
lore

Anup Patel

author
#0 lore raw

cover AIA draft v0.3.0 support for QEMU RISC-V

The latest AIA draft v0.3.0 addresses comments from the architecture review committee.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)

There are primarily two changes:
1) Removing various [m|s|vs]seteienum, [m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clrei;num CSRs because these CSRs were mostly for software convienence.
2) Simplifying the default priority assignment for local interrupts

These patches can also be found in riscv_aia_update_v1 branch at:
https://github.com/avpatel/qemu.git

Corresponding changes in OpenSBI and Linux were small and these can be found at:
riscv_aia_update_v1 branch of https://github.com/avpatel/opensbi.git
riscv_aia_v1 branch of https://github.com/avpatel/linux.git

Anup Patel (2):
target/riscv: Remove CSRs that set/clear an IMSIC interrupt file bits target/riscv: Update default priority table for local interrupts

 target/riscv/cpu_bits.h   |  26 +------
 target/riscv/cpu_helper.c | 134 +++++++++++++++++-----------------
 target/riscv/csr.c        | 150 +-------------------------------------
 3 files changed, 72 insertions(+), 238 deletions(-)
Signature · 1 line
2.34.1
author
#3 lore raw

PATCH 2/2 target/riscv: Update default priority table for local interrupts

The latest AIA draft v0.3.0 defines a relatively simpler scheme for default priority assignments where:
1) local interrupts 24 to 31 and 48 to 63 are reserved for custom use and have implementation specific default priority.
2) remaining local interrupts 0 to 23 and 32 to 47 have a recommended (not mandatory) priority assignments.

We update the default priority table and hviprio mapping as-per above.

---
 target/riscv/cpu_bits.h   |   2 +-
 target/riscv/cpu_helper.c | 134 ++++++++++++++++++--------------------
 2 files changed, 66 insertions(+), 70 deletions(-)
target/riscv/cpu_bits.h +1 -1
index 01608f86e5..63ba867379 100644
@@ -773,7 +773,7 @@ typedef enum RISCVException {
 #define IPRIO_IRQ_BITS                     8
 #define IPRIO_MMAXIPRIO                    255
 #define IPRIO_DEFAULT_UPPER                4
-#define IPRIO_DEFAULT_MIDDLE               (IPRIO_DEFAULT_UPPER + 24)
+#define IPRIO_DEFAULT_MIDDLE               (IPRIO_DEFAULT_UPPER + 12)
 #define IPRIO_DEFAULT_M                    IPRIO_DEFAULT_MIDDLE
 #define IPRIO_DEFAULT_S                    (IPRIO_DEFAULT_M + 3)
 #define IPRIO_DEFAULT_SGEXT                (IPRIO_DEFAULT_S + 3)
target/riscv/cpu_helper.c +65 -69

165 lines not on this page · raw message

Signature · 1 line
2.34.1
author
#1 lore raw

PATCH 1/2 target/riscv: Remove CSRs that set/clear an IMSIC interrupt file bits

In reply to Anup Patel

Based on architecture review committee feedback, the [m|s|vs]seteienum, [m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are removed in the latest AIA draft v0.3.0 specification. (Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)

These CSRs were mostly for software convenience and software can always use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt file bits.

We update the IMSIC CSR emulation as-per above to match the latest AIA draft specification.

---
 target/riscv/cpu_bits.h |  24 +------
 target/riscv/csr.c      | 150 +---------------------------------------
 2 files changed, 6 insertions(+), 168 deletions(-)
target/riscv/cpu_bits.h +3 -21
index 4a55c6a709..01608f86e5 100644
@@ -177,14 +177,8 @@
 #define CSR_MIREG           0x351
 
 /* Machine-Level Interrupts (AIA) */
-#define CSR_MTOPI           0xfb0
-
-/* Machine-Level IMSIC Interface (AIA) */
-#define CSR_MSETEIPNUM      0x358
-#define CSR_MCLREIPNUM      0x359
-#define CSR_MSETEIENUM      0x35a
-#define CSR_MCLREIENUM      0x35b
 #define CSR_MTOPEI          0x35c
+#define CSR_MTOPI           0xfb0
 
 /* Virtual Interrupts for Supervisor Level (AIA) */
 #define CSR_MVIEN           0x308
@@ -224,14 +218,8 @@
 #define CSR_SIREG           0x151
 
 /* Supervisor-Level Interrupts (AIA) */
-#define CSR_STOPI           0xdb0
-
-/* Supervisor-Level IMSIC Interface (AIA) */
-#define CSR_SSETEIPNUM      0x158
-#define CSR_SCLREIPNUM      0x159
-#define CSR_SSETEIENUM      0x15a
-#define CSR_SCLREIENUM      0x15b
 #define CSR_STOPEI          0x15c
+#define CSR_STOPI           0xdb0
 
 /* Supervisor-Level High-Half CSRs (AIA) */
 #define CSR_SIEH            0x114
@@ -282,14 +270,8 @@
 #define CSR_VSIREG          0x251
 
 /* VS-Level Interrupts (H-extension with AIA) */
-#define CSR_VSTOPI          0xeb0
-
-/* VS-Level IMSIC Interface (H-extension with AIA) */
-#define CSR_VSSETEIPNUM     0x258
-#define CSR_VSCLREIPNUM     0x259
-#define CSR_VSSETEIENUM     0x25a
-#define CSR_VSCLREIENUM     0x25b
 #define CSR_VSTOPEI         0x25c
+#define CSR_VSTOPI          0xeb0
 
 /* Hypervisor and VS-Level High-Half CSRs (H-extension with AIA) */
 #define CSR_HIDELEGH        0x613
target/riscv/csr.c +3 -147

183 lines not on this page · raw message

Signature · 1 line
2.34.1
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] target/riscv: Remove CSRs that set/clear an IMSIC interrupt file bits

Quoted 6 lines · Anup Patel

Based on architecture review committee feedback, the [m|s|vs]seteienum, [m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are removed in the latest AIA draft v0.3.0 specification. (Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)

Quoted 8 lines

These CSRs were mostly for software convenience and software can always use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt file bits.

We update the IMSIC CSR emulation as-per above to match the latest AIA draft specification.

Alistair

Quoted 253 lines
---
 target/riscv/cpu_bits.h |  24 +------
 target/riscv/csr.c      | 150 +---------------------------------------
 2 files changed, 6 insertions(+), 168 deletions(-)
target/riscv/cpu_bits.h +3 -21
index 4a55c6a709..01608f86e5 100644
@@ -177,14 +177,8 @@
 #define CSR_MIREG           0x351
 
 /* Machine-Level Interrupts (AIA) */
-#define CSR_MTOPI           0xfb0
-
-/* Machine-Level IMSIC Interface (AIA) */
-#define CSR_MSETEIPNUM      0x358
-#define CSR_MCLREIPNUM      0x359
-#define CSR_MSETEIENUM      0x35a
-#define CSR_MCLREIENUM      0x35b
 #define CSR_MTOPEI          0x35c
+#define CSR_MTOPI           0xfb0
 
 /* Virtual Interrupts for Supervisor Level (AIA) */
 #define CSR_MVIEN           0x308
@@ -224,14 +218,8 @@
 #define CSR_SIREG           0x151
 
 /* Supervisor-Level Interrupts (AIA) */
-#define CSR_STOPI           0xdb0
-
-/* Supervisor-Level IMSIC Interface (AIA) */
-#define CSR_SSETEIPNUM      0x158
-#define CSR_SCLREIPNUM      0x159
-#define CSR_SSETEIENUM      0x15a
-#define CSR_SCLREIENUM      0x15b
 #define CSR_STOPEI          0x15c
+#define CSR_STOPI           0xdb0
 
 /* Supervisor-Level High-Half CSRs (AIA) */
 #define CSR_SIEH            0x114
@@ -282,14 +270,8 @@
 #define CSR_VSIREG          0x251
 
 /* VS-Level Interrupts (H-extension with AIA) */
-#define CSR_VSTOPI          0xeb0
-
-/* VS-Level IMSIC Interface (H-extension with AIA) */
-#define CSR_VSSETEIPNUM     0x258
-#define CSR_VSCLREIPNUM     0x259
-#define CSR_VSSETEIENUM     0x25a
-#define CSR_VSCLREIENUM     0x25b
 #define CSR_VSTOPEI         0x25c
+#define CSR_VSTOPI          0xeb0
 
 /* Hypervisor and VS-Level High-Half CSRs (H-extension with AIA) */
 #define CSR_HIDELEGH        0x613
target/riscv/csr.c +3 -148
index 409a209f14..a4890ebc70 100644
@@ -1040,14 +1040,6 @@ static int aia_xlate_vs_csrno(CPURISCVState *env, int csrno)
         return CSR_VSISELECT;
     case CSR_SIREG:
         return CSR_VSIREG;
-    case CSR_SSETEIPNUM:
-        return CSR_VSSETEIPNUM;
-    case CSR_SCLREIPNUM:
-        return CSR_VSCLREIPNUM;
-    case CSR_SSETEIENUM:
-        return CSR_VSSETEIENUM;
-    case CSR_SCLREIENUM:
-        return CSR_VSCLREIENUM;
     case CSR_STOPEI:
         return CSR_VSTOPEI;
     default:
@@ -1202,124 +1194,6 @@ done:
     return RISCV_EXCP_NONE;
 }
 
-static int rmw_xsetclreinum(CPURISCVState *env, int csrno, target_ulong *val,
-                            target_ulong new_val, target_ulong wr_mask)
-{
-    int ret = -EINVAL;
-    bool set, pend, virt;
-    target_ulong priv, isel, vgein, xlen, nval, wmask;
-
-    /* Translate CSR number for VS-mode */
-    csrno = aia_xlate_vs_csrno(env, csrno);
-
-    /* Decode register details from CSR number */
-    virt = set = pend = false;
-    switch (csrno) {
-    case CSR_MSETEIPNUM:
-        priv = PRV_M;
-        set = true;
-        pend = true;
-        break;
-    case CSR_MCLREIPNUM:
-        priv = PRV_M;
-        pend = true;
-        break;
-    case CSR_MSETEIENUM:
-        priv = PRV_M;
-        set = true;
-        break;
-    case CSR_MCLREIENUM:
-        priv = PRV_M;
-        break;
-    case CSR_SSETEIPNUM:
-        priv = PRV_S;
-        set = true;
-        pend = true;
-        break;
-    case CSR_SCLREIPNUM:
-        priv = PRV_S;
-        pend = true;
-        break;
-    case CSR_SSETEIENUM:
-        priv = PRV_S;
-        set = true;
-        break;
-    case CSR_SCLREIENUM:
-        priv = PRV_S;
-        break;
-    case CSR_VSSETEIPNUM:
-        priv = PRV_S;
-        virt = true;
-        set = true;
-        pend = true;
-        break;
-    case CSR_VSCLREIPNUM:
-        priv = PRV_S;
-        virt = true;
-        pend = true;
-        break;
-    case CSR_VSSETEIENUM:
-        priv = PRV_S;
-        virt = true;
-        set = true;
-        break;
-    case CSR_VSCLREIENUM:
-        priv = PRV_S;
-        virt = true;
-        break;
-    default:
-         goto done;
-    };
-
-    /* IMSIC CSRs only available when machine implements IMSIC. */
-    if (!env->aia_ireg_rmw_fn[priv]) {
-        goto done;
-    }
-
-    /* Find the selected guest interrupt file */
-    vgein = (virt) ? get_field(env->hstatus, HSTATUS_VGEIN) : 0;
-
-    /* Selected guest interrupt file should be valid */
-    if (virt && (!vgein || env->geilen < vgein)) {
-        goto done;
-    }
-
-    /* Set/Clear CSRs always read zero */
-    if (val) {
-        *val = 0;
-    }
-
-    if (wr_mask) {
-        /* Get interrupt number */
-        new_val &= wr_mask;
-
-        /* Find target interrupt pending/enable register */
-        xlen = riscv_cpu_mxl_bits(env);
-        isel = (new_val / xlen);
-        isel *= (xlen / IMSIC_EIPx_BITS);
-        isel += (pend) ? ISELECT_IMSIC_EIP0 : ISELECT_IMSIC_EIE0;
-
-        /* Find the interrupt bit to be set/clear */
-        wmask = ((target_ulong)1) << (new_val % xlen);
-        nval = (set) ? wmask : 0;
-
-        /* Call machine specific IMSIC register emulation */
-        ret = env->aia_ireg_rmw_fn[priv](env->aia_ireg_rmw_fn_arg[priv],
-                                         AIA_MAKE_IREG(isel, priv, virt,
-                                                       vgein, xlen),
-                                         NULL, nval, wmask);
-    } else {
-        ret = 0;
-    }
-
-done:
-    if (ret) {
-        return (riscv_cpu_virt_enabled(env) && virt) ?
-               RISCV_EXCP_VIRT_INSTRUCTION_FAULT : RISCV_EXCP_ILLEGAL_INST;
-    }
-    return RISCV_EXCP_NONE;
-}
-
 static int rmw_xtopei(CPURISCVState *env, int csrno, target_ulong *val,
                       target_ulong new_val, target_ulong wr_mask)
 {
@@ -3409,14 +3283,8 @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
     [CSR_MIREG]    = { "mireg",    aia_any,   NULL, NULL,    rmw_xireg },
 
     /* Machine-Level Interrupts (AIA) */
-    [CSR_MTOPI]    = { "mtopi",    aia_any,   read_mtopi },
-
-    /* Machine-Level IMSIC Interface (AIA) */
-    [CSR_MSETEIPNUM] = { "mseteipnum", aia_any, NULL, NULL, rmw_xsetclreinum },
-    [CSR_MCLREIPNUM] = { "mclreipnum", aia_any, NULL, NULL, rmw_xsetclreinum },
-    [CSR_MSETEIENUM] = { "mseteienum", aia_any, NULL, NULL, rmw_xsetclreinum },
-    [CSR_MCLREIENUM] = { "mclreienum", aia_any, NULL, NULL, rmw_xsetclreinum },
     [CSR_MTOPEI]     = { "mtopei",     aia_any, NULL, NULL, rmw_xtopei },
+    [CSR_MTOPI]    = { "mtopi",    aia_any,   read_mtopi },
 
     /* Virtual Interrupts for Supervisor Level (AIA) */
     [CSR_MVIEN]      = { "mvien", aia_any, read_zero, write_ignore },
@@ -3464,14 +3332,8 @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
     [CSR_SIREG]      = { "sireg",      aia_smode, NULL, NULL, rmw_xireg },
 
     /* Supervisor-Level Interrupts (AIA) */
-    [CSR_STOPI]      = { "stopi",      aia_smode, read_stopi },
-
-    /* Supervisor-Level IMSIC Interface (AIA) */
-    [CSR_SSETEIPNUM] = { "sseteipnum", aia_smode, NULL, NULL, rmw_xsetclreinum },
-    [CSR_SCLREIPNUM] = { "sclreipnum", aia_smode, NULL, NULL, rmw_xsetclreinum },
-    [CSR_SSETEIENUM] = { "sseteienum", aia_smode, NULL, NULL, rmw_xsetclreinum },
-    [CSR_SCLREIENUM] = { "sclreienum", aia_smode, NULL, NULL, rmw_xsetclreinum },
     [CSR_STOPEI]     = { "stopei",     aia_smode, NULL, NULL, rmw_xtopei },
+    [CSR_STOPI]      = { "stopi",      aia_smode, read_stopi },
 
     /* Supervisor-Level High-Half CSRs (AIA) */
     [CSR_SIEH]       = { "sieh",   aia_smode32, NULL, NULL, rmw_sieh },
@@ -3543,14 +3405,8 @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
     [CSR_VSIREG]      = { "vsireg",      aia_hmode, NULL, NULL,      rmw_xireg },
 
     /* VS-Level Interrupts (H-extension with AIA) */
-    [CSR_VSTOPI]      = { "vstopi",      aia_hmode, read_vstopi },
-
-    /* VS-Level IMSIC Interface (H-extension with AIA) */
-    [CSR_VSSETEIPNUM] = { "vsseteipnum", aia_hmode, NULL, NULL, rmw_xsetclreinum },
-    [CSR_VSCLREIPNUM] = { "vsclreipnum", aia_hmode, NULL, NULL, rmw_xsetclreinum },
-    [CSR_VSSETEIENUM] = { "vsseteienum", aia_hmode, NULL, NULL, rmw_xsetclreinum },
-    [CSR_VSCLREIENUM] = { "vsclreienum", aia_hmode, NULL, NULL, rmw_xsetclreinum },
     [CSR_VSTOPEI]     = { "vstopei",     aia_hmode, NULL, NULL, rmw_xtopei },
+    [CSR_VSTOPI]      = { "vstopi",      aia_hmode, read_vstopi },
 
     /* Hypervisor and VS-Level High-Half CSRs (H-extension with AIA) */
     [CSR_HIDELEGH]    = { "hidelegh",    aia_hmode32, NULL, NULL, rmw_hidelegh },
--

2.34.1

Reviewed-by on v1 2/2
#4 lore raw

Re: [PATCH 2/2] target/riscv: Update default priority table for local interrupts

In reply to Anup Patel
Quoted 11 lines · Anup Patel

The latest AIA draft v0.3.0 defines a relatively simpler scheme for default priority assignments where:
1) local interrupts 24 to 31 and 48 to 63 are reserved for custom use and have implementation specific default priority.
2) remaining local interrupts 0 to 23 and 32 to 47 have a recommended (not mandatory) priority assignments.

We update the default priority table and hviprio mapping as-per above.

Alistair

Quoted 194 lines
---
 target/riscv/cpu_bits.h   |   2 +-
 target/riscv/cpu_helper.c | 134 ++++++++++++++++++--------------------
 2 files changed, 66 insertions(+), 70 deletions(-)
target/riscv/cpu_bits.h +1 -1
index 01608f86e5..63ba867379 100644
@@ -773,7 +773,7 @@ typedef enum RISCVException {
 #define IPRIO_IRQ_BITS                     8
 #define IPRIO_MMAXIPRIO                    255
 #define IPRIO_DEFAULT_UPPER                4
-#define IPRIO_DEFAULT_MIDDLE               (IPRIO_DEFAULT_UPPER + 24)
+#define IPRIO_DEFAULT_MIDDLE               (IPRIO_DEFAULT_UPPER + 12)
 #define IPRIO_DEFAULT_M                    IPRIO_DEFAULT_MIDDLE
 #define IPRIO_DEFAULT_S                    (IPRIO_DEFAULT_M + 3)
 #define IPRIO_DEFAULT_SGEXT                (IPRIO_DEFAULT_S + 3)
target/riscv/cpu_helper.c +65 -70
index 3c8ebecf84..063a1403db 100644
@@ -169,17 +169,17 @@ void riscv_cpu_update_mask(CPURISCVState *env)
  * 14 "
  * 15 "
  * 16 "
- * 18 Debug/trace interrupt
- * 20 (Reserved interrupt)
+ * 17 "
+ * 18 "
+ * 19 "
+ * 20 "
+ * 21 "
  * 22 "
- * 24 "
- * 26 "
- * 28 "
- * 30 (Reserved for standard reporting of bus or system errors)
+ * 23 "
  */
 
 static const int hviprio_index2irq[] = {
-    0, 1, 4, 5, 8, 13, 14, 15, 16, 18, 20, 22, 24, 26, 28, 30 };
+    0, 1, 4, 5, 8, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 };
 static const int hviprio_index2rdzero[] = {
     1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
 
@@ -208,50 +208,60 @@ int riscv_cpu_hviprio_index2irq(int index, int *out_irq, int *out_rdzero)
  *  Default  |
  *  Priority | Major Interrupt Numbers
  * ----------------------------------------------------------------
- *  Highest  | 63 (3f), 62 (3e), 31 (1f), 30 (1e), 61 (3d), 60 (3c),
- *           | 59 (3b), 58 (3a), 29 (1d), 28 (1c), 57 (39), 56 (38),
- *           | 55 (37), 54 (36), 27 (1b), 26 (1a), 53 (35), 52 (34),
- *           | 51 (33), 50 (32), 25 (19), 24 (18), 49 (31), 48 (30)
+ *  Highest  | 47, 23, 46, 45, 22, 44,
+ *           | 43, 21, 42, 41, 20, 40
  *           |
  *           | 11 (0b),  3 (03),  7 (07)
  *           |  9 (09),  1 (01),  5 (05)
  *           | 12 (0c)
  *           | 10 (0a),  2 (02),  6 (06)
  *           |
- *           | 47 (2f), 46 (2e), 23 (17), 22 (16), 45 (2d), 44 (2c),
- *           | 43 (2b), 42 (2a), 21 (15), 20 (14), 41 (29), 40 (28),
- *           | 39 (27), 38 (26), 19 (13), 18 (12), 37 (25), 36 (24),
- *  Lowest   | 35 (23), 34 (22), 17 (11), 16 (10), 33 (21), 32 (20)
+ *           | 39, 19, 38, 37, 18, 36,
+ *  Lowest   | 35, 17, 34, 33, 16, 32
  * ----------------------------------------------------------------
  */
 static const uint8_t default_iprio[64] = {
- [63] = IPRIO_DEFAULT_UPPER,
- [62] = IPRIO_DEFAULT_UPPER + 1,
- [31] = IPRIO_DEFAULT_UPPER + 2,
- [30] = IPRIO_DEFAULT_UPPER + 3,
- [61] = IPRIO_DEFAULT_UPPER + 4,
- [60] = IPRIO_DEFAULT_UPPER + 5,
-
- [59] = IPRIO_DEFAULT_UPPER + 6,
- [58] = IPRIO_DEFAULT_UPPER + 7,
- [29] = IPRIO_DEFAULT_UPPER + 8,
- [28] = IPRIO_DEFAULT_UPPER + 9,
- [57] = IPRIO_DEFAULT_UPPER + 10,
- [56] = IPRIO_DEFAULT_UPPER + 11,
-
- [55] = IPRIO_DEFAULT_UPPER + 12,
- [54] = IPRIO_DEFAULT_UPPER + 13,
- [27] = IPRIO_DEFAULT_UPPER + 14,
- [26] = IPRIO_DEFAULT_UPPER + 15,
- [53] = IPRIO_DEFAULT_UPPER + 16,
- [52] = IPRIO_DEFAULT_UPPER + 17,
-
- [51] = IPRIO_DEFAULT_UPPER + 18,
- [50] = IPRIO_DEFAULT_UPPER + 19,
- [25] = IPRIO_DEFAULT_UPPER + 20,
- [24] = IPRIO_DEFAULT_UPPER + 21,
- [49] = IPRIO_DEFAULT_UPPER + 22,
- [48] = IPRIO_DEFAULT_UPPER + 23,
+ /* Custom interrupts 48 to 63 */
+ [63] = IPRIO_MMAXIPRIO,
+ [62] = IPRIO_MMAXIPRIO,
+ [61] = IPRIO_MMAXIPRIO,
+ [60] = IPRIO_MMAXIPRIO,
+ [59] = IPRIO_MMAXIPRIO,
+ [58] = IPRIO_MMAXIPRIO,
+ [57] = IPRIO_MMAXIPRIO,
+ [56] = IPRIO_MMAXIPRIO,
+ [55] = IPRIO_MMAXIPRIO,
+ [54] = IPRIO_MMAXIPRIO,
+ [53] = IPRIO_MMAXIPRIO,
+ [52] = IPRIO_MMAXIPRIO,
+ [51] = IPRIO_MMAXIPRIO,
+ [50] = IPRIO_MMAXIPRIO,
+ [49] = IPRIO_MMAXIPRIO,
+ [48] = IPRIO_MMAXIPRIO,
+
+ /* Custom interrupts 24 to 31 */
+ [31] = IPRIO_MMAXIPRIO,
+ [30] = IPRIO_MMAXIPRIO,
+ [29] = IPRIO_MMAXIPRIO,
+ [28] = IPRIO_MMAXIPRIO,
+ [27] = IPRIO_MMAXIPRIO,
+ [26] = IPRIO_MMAXIPRIO,
+ [25] = IPRIO_MMAXIPRIO,
+ [24] = IPRIO_MMAXIPRIO,
+
+ [47] = IPRIO_DEFAULT_UPPER,
+ [23] = IPRIO_DEFAULT_UPPER + 1,
+ [46] = IPRIO_DEFAULT_UPPER + 2,
+ [45] = IPRIO_DEFAULT_UPPER + 3,
+ [22] = IPRIO_DEFAULT_UPPER + 4,
+ [44] = IPRIO_DEFAULT_UPPER + 5,
+
+ [43] = IPRIO_DEFAULT_UPPER + 6,
+ [21] = IPRIO_DEFAULT_UPPER + 7,
+ [42] = IPRIO_DEFAULT_UPPER + 8,
+ [41] = IPRIO_DEFAULT_UPPER + 9,
+ [20] = IPRIO_DEFAULT_UPPER + 10,
+ [40] = IPRIO_DEFAULT_UPPER + 11,
 
  [11] = IPRIO_DEFAULT_M,
  [3]  = IPRIO_DEFAULT_M + 1,
@@ -267,33 +277,19 @@ static const uint8_t default_iprio[64] = {
  [2]  = IPRIO_DEFAULT_VS + 1,
  [6]  = IPRIO_DEFAULT_VS + 2,
 
- [47] = IPRIO_DEFAULT_LOWER,
- [46] = IPRIO_DEFAULT_LOWER + 1,
- [23] = IPRIO_DEFAULT_LOWER + 2,
- [22] = IPRIO_DEFAULT_LOWER + 3,
- [45] = IPRIO_DEFAULT_LOWER + 4,
- [44] = IPRIO_DEFAULT_LOWER + 5,
-
- [43] = IPRIO_DEFAULT_LOWER + 6,
- [42] = IPRIO_DEFAULT_LOWER + 7,
- [21] = IPRIO_DEFAULT_LOWER + 8,
- [20] = IPRIO_DEFAULT_LOWER + 9,
- [41] = IPRIO_DEFAULT_LOWER + 10,
- [40] = IPRIO_DEFAULT_LOWER + 11,
-
- [39] = IPRIO_DEFAULT_LOWER + 12,
- [38] = IPRIO_DEFAULT_LOWER + 13,
- [19] = IPRIO_DEFAULT_LOWER + 14,
- [18] = IPRIO_DEFAULT_LOWER + 15,
- [37] = IPRIO_DEFAULT_LOWER + 16,
- [36] = IPRIO_DEFAULT_LOWER + 17,
-
- [35] = IPRIO_DEFAULT_LOWER + 18,
- [34] = IPRIO_DEFAULT_LOWER + 19,
- [17] = IPRIO_DEFAULT_LOWER + 20,
- [16] = IPRIO_DEFAULT_LOWER + 21,
- [33] = IPRIO_DEFAULT_LOWER + 22,
- [32] = IPRIO_DEFAULT_LOWER + 23,
+ [39] = IPRIO_DEFAULT_LOWER,
+ [19] = IPRIO_DEFAULT_LOWER + 1,
+ [38] = IPRIO_DEFAULT_LOWER + 2,
+ [37] = IPRIO_DEFAULT_LOWER + 3,
+ [18] = IPRIO_DEFAULT_LOWER + 4,
+ [36] = IPRIO_DEFAULT_LOWER + 5,
+
+ [35] = IPRIO_DEFAULT_LOWER + 6,
+ [17] = IPRIO_DEFAULT_LOWER + 7,
+ [34] = IPRIO_DEFAULT_LOWER + 8,
+ [33] = IPRIO_DEFAULT_LOWER + 9,
+ [16] = IPRIO_DEFAULT_LOWER + 10,
+ [32] = IPRIO_DEFAULT_LOWER + 11,
 };
 
 uint8_t riscv_cpu_default_priority(int irq)
--

2.34.1

#5 lore raw
In reply to Anup Patel
Quoted 14 lines · Anup Patel

The latest AIA draft v0.3.0 addresses comments from the architecture review committee.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)

There are primarily two changes:
1) Removing various [m|s|vs]seteienum, [m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clrei;num CSRs because these CSRs were mostly for software convienence.
2) Simplifying the default priority assignment for local interrupts

These patches can also be found in riscv_aia_update_v1 branch at:
https://github.com/avpatel/qemu.git

Quoted 8 lines

Corresponding changes in OpenSBI and Linux were small and these can be found at:
riscv_aia_update_v1 branch of https://github.com/avpatel/opensbi.git
riscv_aia_v1 branch of https://github.com/avpatel/linux.git

Anup Patel (2):
target/riscv: Remove CSRs that set/clear an IMSIC interrupt file bits target/riscv: Update default priority table for local interrupts

Thanks!

Applied to riscv-to-apply.next

Alistair

Quoted 10 lines
 target/riscv/cpu_bits.h   |  26 +------
 target/riscv/cpu_helper.c | 134 +++++++++++++++++-----------------
 target/riscv/csr.c        | 150 +-------------------------------------
 3 files changed, 72 insertions(+), 238 deletions(-)

--
2.34.1