Skip to contentSkip to conversation

arm: bcmbca: add basic support for Broadcom BCA SoCs

PATCH Superseded William Zhang 2 participants 8 messages Jul 29, 2022 – Aug 1, 2022

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

William Zhang

author maintainer
#0 lore raw

cover arm: bcmbca: add basic support for Broadcom BCA SoCs

Broadcom BCA (Broadband Carrier Access origin) chipset family includes DSL, PON and WLAN access point and gateway SoC. Now that the ARCH_BCMBCA architecture and its first SoC BCM47622 are supported in u-boot 2022.07, this patch series add the basic support for following BCA chips under
ARCH_BCMBCA: BCM63178, BCM6846, BCM6878, BCM6756 and BCM63148.

We expect to send additional patches for more BCMBCA SoCs in the near future.

William Zhang (5):
arm: bcmbca: add bcm63178 SoC support
arm: bcmbca: add bcm6846 SoC support
arm: bcmbca: add bcm6878 SoC support
arm: bcmbca: add bcm6756 SoC support
arm: bcmbca: add bcm63148 SoC support

 MAINTAINERS                            |   9 +-
 arch/arm/dts/Makefile                  |  10 ++
 arch/arm/dts/bcm63148.dtsi             | 103 ++++++++++++++++++++
 arch/arm/dts/bcm63178.dtsi             | 120 +++++++++++++++++++++++
 arch/arm/dts/bcm6756.dtsi              | 130 +++++++++++++++++++++++++
 arch/arm/dts/bcm6846.dtsi              | 103 ++++++++++++++++++++
 arch/arm/dts/bcm6878.dtsi              | 111 +++++++++++++++++++++
 arch/arm/dts/bcm963148.dts             |  30 ++++++
 arch/arm/dts/bcm963178.dts             |  30 ++++++
 arch/arm/dts/bcm96756.dts              |  30 ++++++
 arch/arm/dts/bcm96846.dts              |  30 ++++++
 arch/arm/dts/bcm96878.dts              |  30 ++++++
 arch/arm/mach-bcmbca/Kconfig           |  42 +++++++-
 arch/arm/mach-bcmbca/Makefile          |   5 +
 arch/arm/mach-bcmbca/bcm63148/Kconfig  |  17 ++++
 arch/arm/mach-bcmbca/bcm63148/Makefile |   5 +
 arch/arm/mach-bcmbca/bcm63178/Kconfig  |  17 ++++
 arch/arm/mach-bcmbca/bcm63178/Makefile |   5 +
 arch/arm/mach-bcmbca/bcm6756/Kconfig   |  17 ++++
 arch/arm/mach-bcmbca/bcm6756/Makefile  |   5 +
 arch/arm/mach-bcmbca/bcm6846/Kconfig   |  17 ++++
 arch/arm/mach-bcmbca/bcm6846/Makefile  |   5 +
 arch/arm/mach-bcmbca/bcm6878/Kconfig   |  17 ++++
 arch/arm/mach-bcmbca/bcm6878/Makefile  |   5 +
 board/broadcom/bcmbca/Kconfig          |  35 +++++++
 configs/bcm963148_defconfig            |  22 +++++
 configs/bcm963178_defconfig            |  22 +++++
 configs/bcm96756_defconfig             |  22 +++++
 configs/bcm96846_defconfig             |  22 +++++
 configs/bcm96878_defconfig             |  22 +++++
 include/configs/bcm963148.h            |  12 +++
 include/configs/bcm963178.h            |  12 +++
 include/configs/bcm96756.h             |  12 +++
 include/configs/bcm96846.h             |  12 +++
 include/configs/bcm96878.h             |  12 +++
 35 files changed, 1095 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/bcm63148.dtsi
 create mode 100644 arch/arm/dts/bcm63178.dtsi
 create mode 100644 arch/arm/dts/bcm6756.dtsi
 create mode 100644 arch/arm/dts/bcm6846.dtsi
 create mode 100644 arch/arm/dts/bcm6878.dtsi
 create mode 100644 arch/arm/dts/bcm963148.dts
 create mode 100644 arch/arm/dts/bcm963178.dts
 create mode 100644 arch/arm/dts/bcm96756.dts
 create mode 100644 arch/arm/dts/bcm96846.dts
 create mode 100644 arch/arm/dts/bcm96878.dts
 create mode 100644 arch/arm/mach-bcmbca/bcm63148/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm63148/Makefile
 create mode 100644 arch/arm/mach-bcmbca/bcm63178/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm63178/Makefile
 create mode 100644 arch/arm/mach-bcmbca/bcm6756/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm6756/Makefile
 create mode 100644 arch/arm/mach-bcmbca/bcm6846/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm6846/Makefile
 create mode 100644 arch/arm/mach-bcmbca/bcm6878/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm6878/Makefile
 create mode 100644 configs/bcm963148_defconfig
 create mode 100644 configs/bcm963178_defconfig
 create mode 100644 configs/bcm96756_defconfig
 create mode 100644 configs/bcm96846_defconfig
 create mode 100644 configs/bcm96878_defconfig
 create mode 100644 include/configs/bcm963148.h
 create mode 100644 include/configs/bcm963178.h
 create mode 100644 include/configs/bcm96756.h
 create mode 100644 include/configs/bcm96846.h
 create mode 100644 include/configs/bcm96878.h
Signature · 1 line
2.37.1
author maintainer
#1 lore raw

PATCH 1/5 arm: bcmbca: add bcm63178 SoC support

BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.

---

 MAINTAINERS                            |   5 +-
 arch/arm/dts/Makefile                  |   2 +
 arch/arm/dts/bcm63178.dtsi             | 120 +++++++++++++++++++++++++
 arch/arm/dts/bcm963178.dts             |  30 +++++++
 arch/arm/mach-bcmbca/Kconfig           |  10 ++-
 arch/arm/mach-bcmbca/Makefile          |   1 +
 arch/arm/mach-bcmbca/bcm63178/Kconfig  |  17 ++++
 arch/arm/mach-bcmbca/bcm63178/Makefile |   5 ++
 board/broadcom/bcmbca/Kconfig          |   7 ++
 configs/bcm963178_defconfig            |  22 +++++
 include/configs/bcm963178.h            |  12 +++
 11 files changed, 228 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/bcm63178.dtsi
 create mode 100644 arch/arm/dts/bcm963178.dts
 create mode 100644 arch/arm/mach-bcmbca/bcm63178/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm63178/Makefile
 create mode 100644 configs/bcm963178_defconfig
 create mode 100644 include/configs/bcm963178.h
MAINTAINERS +3 -2
index 31291d34f353..a01d2b69b260 100644
@@ -216,8 +216,9 @@ M:	Joel Peshkin <[email protected]>
 S:	Maintained
 F:	arch/arm/mach-bcmbca/
 F:	board/broadcom/bcmbca/
-F:	configs/bcm947622_defconfig
-F:	include/configs/bcm947622.h
+N:	bcmbca
+N:	bcm[9]?47622
+N:	bcm[9]?63178
 
 ARM BROADCOM BCMSTB
 M:	Thomas Fitzsimmons <[email protected]>
arch/arm/dts/Makefile +2 -0
index 7fa275ea7cca..6628b1151fea 100644
@@ -1165,6 +1165,8 @@ dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
 
 dtb-$(CONFIG_BCM47622) += \
 	bcm947622.dtb
+dtb-$(CONFIG_BCM63178) += \
+	bcm963178.dtb
 
 dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
 dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
arch/arm/dts/bcm63178.dtsi new file +120 -0

120 lines not on this page · raw message

arch/arm/dts/bcm963178.dts new file +30 -0
new file mode 100644
index 000000000000..fa096e9cde23
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
arch/arm/mach-bcmbca/Kconfig +9 -1
index 2d49380f879b..99e26e4ab8c9 100644
@@ -12,6 +12,14 @@ config BCM47622
 	select DM_SERIAL
 	select PL01X_SERIAL
 
-endif
+config BCM63178
+	bool "Support for Broadcom 63178 Family"
+	select SYS_ARCH_TIMER
+	select CPU_V7A
+	select DM_SERIAL
+	select PL01X_SERIAL
 
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
+source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
+
+endif
arch/arm/mach-bcmbca/Makefile +1 -0
index 072d4ea7b5e6..fdcade6bfe1a 100644
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_BCM47622) += bcm47622/
+obj-$(CONFIG_BCM63178) += bcm63178/
arch/arm/mach-bcmbca/bcm63178/Kconfig new file +17 -0
new file mode 100644
index 000000000000..73ac46284b2c
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM63178
+
+config TARGET_BCM963178
+	bool "Broadcom 63178 Reference Board"
+	depends on ARCH_BCMBCA
+
+config SYS_SOC
+	default "bcm63178"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
arch/arm/mach-bcmbca/bcm63178/Makefile new file +5 -0
new file mode 100644
index 000000000000..beb979af7520
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
board/broadcom/bcmbca/Kconfig +7 -0
index 63d4252da620..53846761b664 100644
@@ -15,3 +15,10 @@ config SYS_CONFIG_NAME
 	default "bcm947622"
 
 endif
+
+if TARGET_BCM963178
+
+config SYS_CONFIG_NAME
+	default "bcm963178"
+
+endif
configs/bcm963178_defconfig new file +22 -0
new file mode 100644
index 000000000000..6e8668d68aec
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM63178=y
+CONFIG_TARGET_BCM963178=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm963178"
+CONFIG_IDENT_STRING=" Broadcom BCM63178"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
include/configs/bcm963178.h new file +12 -0
new file mode 100644
index 000000000000..3ee2011b3a2d
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963178_H
+#define __BCM963178_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define COUNTER_FREQUENCY		50000000
+
+#endif
Signature · 1 line
2.37.1
#2 lore raw

Re: [PATCH 1/5] arm: bcmbca: add bcm63178 SoC support

Quoted 13 lines · William Zhang

BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.

[snip]

Quoted 8 lines
include/configs/bcm963178.h new file +2 -0
new file mode 100644
index 000000000000..3ee2011b3a2d
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*

include/configs/bcm963178.h line 12

Quoted 10 lines
include/configs/bcm963178.h new file +10 -0
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963178_H
+#define __BCM963178_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define COUNTER_FREQUENCY		50000000
+
+#endif

The one problem I have is that we need to put COUNTER_FREQUENCY somewhere else, if it needs to be defined. I see the top-level README has outdated information about COUNTER_FREQUENCY, which is most often CONFIG_COUNTER_FREQUENCY instead, as well.

Signature · 1 line
Tom
author maintainer
#3 lore raw

Re: [PATCH 1/5] arm: bcmbca: add bcm63178 SoC support

Hi Tom,

Quoted 31 lines · Tom Rini
Quoted 13 lines · William Zhang

BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.

[snip]

Quoted 15 lines
include/configs/bcm963178.h new file +9 -0
new file mode 100644
index 000000000000..3ee2011b3a2d
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963178_H
+#define __BCM963178_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
Quoted 9 lines

include/configs/bcm963178.h line 12

Quoted 3 lines
include/configs/bcm963178.h new file +3 -0
+#define COUNTER_FREQUENCY		50000000
+
+#endif

The one problem I have is that we need to put COUNTER_FREQUENCY somewhere else, if it needs to be defined. I see the top-level README has outdated information about COUNTER_FREQUENCY, which is most often CONFIG_COUNTER_FREQUENCY instead, as well.

Sure I will move it to CONFIG_COUNTER_FREQUENCY in soc defconfig.

author maintainer
#4 lore raw

PATCH 2/5 arm: bcmbca: add bcm6846 SoC support

In reply to William Zhang

BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.

---

 MAINTAINERS                           |   1 +
 arch/arm/dts/Makefile                 |   2 +
 arch/arm/dts/bcm6846.dtsi             | 103 ++++++++++++++++++++++++++
 arch/arm/dts/bcm96846.dts             |  30 ++++++++
 arch/arm/mach-bcmbca/Kconfig          |   8 ++
 arch/arm/mach-bcmbca/Makefile         |   1 +
 arch/arm/mach-bcmbca/bcm6846/Kconfig  |  17 +++++
 arch/arm/mach-bcmbca/bcm6846/Makefile |   5 ++
 board/broadcom/bcmbca/Kconfig         |   7 ++
 configs/bcm96846_defconfig            |  22 ++++++
 include/configs/bcm96846.h            |  12 +++
 11 files changed, 208 insertions(+)
 create mode 100644 arch/arm/dts/bcm6846.dtsi
 create mode 100644 arch/arm/dts/bcm96846.dts
 create mode 100644 arch/arm/mach-bcmbca/bcm6846/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm6846/Makefile
 create mode 100644 configs/bcm96846_defconfig
 create mode 100644 include/configs/bcm96846.h
MAINTAINERS +1 -0
index a01d2b69b260..b0fde1cb7285 100644
@@ -219,6 +219,7 @@ F:	board/broadcom/bcmbca/
 N:	bcmbca
 N:	bcm[9]?47622
 N:	bcm[9]?63178
+N:	bcm[9]?6846
 
 ARM BROADCOM BCMSTB
 M:	Thomas Fitzsimmons <[email protected]>
arch/arm/dts/Makefile +2 -0
index 6628b1151fea..5300ae8b2a1c 100644
@@ -1167,6 +1167,8 @@ dtb-$(CONFIG_BCM47622) += \
 	bcm947622.dtb
 dtb-$(CONFIG_BCM63178) += \
 	bcm963178.dtb
+dtb-$(CONFIG_BCM6846) += \
+	bcm96846.dtb
 
 dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
 dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
arch/arm/dts/bcm6846.dtsi new file +103 -0

103 lines not on this page · raw message

arch/arm/dts/bcm96846.dts new file +30 -0
new file mode 100644
index 000000000000..c70ebccabc19
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
arch/arm/mach-bcmbca/Kconfig +8 -0
index 99e26e4ab8c9..891ac30dbdce 100644
@@ -19,7 +19,15 @@ config BCM63178
 	select DM_SERIAL
 	select PL01X_SERIAL
 
+config BCM6846
+	bool "Support for Broadcom 6846 Family"
+	select SYS_ARCH_TIMER
+	select CPU_V7A
+	select DM_SERIAL
+	select BCM6345_SERIAL
+
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
 source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
+source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
 
 endif
arch/arm/mach-bcmbca/Makefile +1 -0
index fdcade6bfe1a..308730407212 100644
@@ -5,3 +5,4 @@
 
 obj-$(CONFIG_BCM47622) += bcm47622/
 obj-$(CONFIG_BCM63178) += bcm63178/
+obj-$(CONFIG_BCM6846) += bcm6846/
arch/arm/mach-bcmbca/bcm6846/Kconfig new file +17 -0
new file mode 100644
index 000000000000..229ab88dbb0d
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM6846
+
+config TARGET_BCM96846
+	bool "Broadcom 6846 Reference Board"
+	depends on ARCH_BCMBCA
+
+config SYS_SOC
+	default "bcm6846"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
arch/arm/mach-bcmbca/bcm6846/Makefile new file +5 -0
new file mode 100644
index 000000000000..beb979af7520
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
board/broadcom/bcmbca/Kconfig +7 -0
index 53846761b664..70ca38099fcf 100644
@@ -22,3 +22,10 @@ config SYS_CONFIG_NAME
 	default "bcm963178"
 
 endif
+
+if TARGET_BCM96846
+
+config SYS_CONFIG_NAME
+	default "bcm96846"
+
+endif
configs/bcm96846_defconfig new file +22 -0
new file mode 100644
index 000000000000..364bb978c8f1
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM6846=y
+CONFIG_TARGET_BCM96846=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm96846"
+CONFIG_IDENT_STRING=" Broadcom BCM6846"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
include/configs/bcm96846.h new file +12 -0
new file mode 100644
index 000000000000..72c588cbe8fc
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM96846_H
+#define __BCM96846_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define COUNTER_FREQUENCY		50000000
+
+#endif
Signature · 1 line
2.37.1
author maintainer
#5 lore raw

PATCH 3/5 arm: bcmbca: add bcm6878 SoC support

In reply to William Zhang

BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux with minor fix-up that needs to be upstreamed to linux as well.

The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.

---

 MAINTAINERS                           |   1 +
 arch/arm/dts/Makefile                 |   2 +
 arch/arm/dts/bcm6878.dtsi             | 111 ++++++++++++++++++++++++++
 arch/arm/dts/bcm96878.dts             |  30 +++++++
 arch/arm/mach-bcmbca/Kconfig          |   8 ++
 arch/arm/mach-bcmbca/Makefile         |   1 +
 arch/arm/mach-bcmbca/bcm6878/Kconfig  |  17 ++++
 arch/arm/mach-bcmbca/bcm6878/Makefile |   5 ++
 board/broadcom/bcmbca/Kconfig         |   7 ++
 configs/bcm96878_defconfig            |  22 +++++
 include/configs/bcm96878.h            |  12 +++
 11 files changed, 216 insertions(+)
 create mode 100644 arch/arm/dts/bcm6878.dtsi
 create mode 100644 arch/arm/dts/bcm96878.dts
 create mode 100644 arch/arm/mach-bcmbca/bcm6878/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm6878/Makefile
 create mode 100644 configs/bcm96878_defconfig
 create mode 100644 include/configs/bcm96878.h
MAINTAINERS +1 -0
index b0fde1cb7285..db16d0211c52 100644
@@ -220,6 +220,7 @@ N:	bcmbca
 N:	bcm[9]?47622
 N:	bcm[9]?63178
 N:	bcm[9]?6846
+N:	bcm[9]?6878
 
 ARM BROADCOM BCMSTB
 M:	Thomas Fitzsimmons <[email protected]>
arch/arm/dts/Makefile +2 -0
index 5300ae8b2a1c..281f92c841c0 100644
@@ -1169,6 +1169,8 @@ dtb-$(CONFIG_BCM63178) += \
 	bcm963178.dtb
 dtb-$(CONFIG_BCM6846) += \
 	bcm96846.dtb
+dtb-$(CONFIG_BCM6878) += \
+	bcm96878.dtb
 
 dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
 dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
arch/arm/dts/bcm6878.dtsi new file +111 -0

111 lines not on this page · raw message

arch/arm/dts/bcm96878.dts new file +30 -0
new file mode 100644
index 000000000000..8fbc175cb452
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
arch/arm/mach-bcmbca/Kconfig +8 -0
index 891ac30dbdce..5b67975c4542 100644
@@ -26,8 +26,16 @@ config BCM6846
 	select DM_SERIAL
 	select BCM6345_SERIAL
 
+config BCM6878
+	bool "Support for Broadcom 6878 Family"
+	select SYS_ARCH_TIMER
+	select CPU_V7A
+	select DM_SERIAL
+	select PL01X_SERIAL
+
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
 source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
 source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
+source "arch/arm/mach-bcmbca/bcm6878/Kconfig"
 
 endif
arch/arm/mach-bcmbca/Makefile +1 -0
index 308730407212..87710c66f9b7 100644
@@ -6,3 +6,4 @@
 obj-$(CONFIG_BCM47622) += bcm47622/
 obj-$(CONFIG_BCM63178) += bcm63178/
 obj-$(CONFIG_BCM6846) += bcm6846/
+obj-$(CONFIG_BCM6878) += bcm6878/
arch/arm/mach-bcmbca/bcm6878/Kconfig new file +17 -0
new file mode 100644
index 000000000000..43f8942c9b1d
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM6878
+
+config TARGET_BCM96878
+	bool "Broadcom 6878 Reference Board"
+	depends on ARCH_BCMBCA
+
+config SYS_SOC
+	default "bcm6878"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
arch/arm/mach-bcmbca/bcm6878/Makefile new file +5 -0
new file mode 100644
index 000000000000..beb979af7520
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
board/broadcom/bcmbca/Kconfig +7 -0
index 70ca38099fcf..2d95deec6666 100644
@@ -16,6 +16,13 @@ config SYS_CONFIG_NAME
 
 endif
 
+if TARGET_BCM96878
+
+config SYS_CONFIG_NAME
+	default "bcm96878"
+
+endif
+
 if TARGET_BCM963178
 
 config SYS_CONFIG_NAME
configs/bcm96878_defconfig new file +22 -0
new file mode 100644
index 000000000000..b14200e59fd4
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM6878=y
+CONFIG_TARGET_BCM96878=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm96878"
+CONFIG_IDENT_STRING=" Broadcom BCM6878"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
include/configs/bcm96878.h new file +12 -0
new file mode 100644
index 000000000000..ed5b2483de0e
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM96878_H
+#define __BCM96878_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define COUNTER_FREQUENCY		50000000
+
+#endif
Signature · 1 line
2.37.1
author maintainer
#6 lore raw

PATCH 4/5 arm: bcmbca: add bcm6756 SoC support

In reply to William Zhang

BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC. It is part of the BCA(Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.

---

 MAINTAINERS                           |   1 +
 arch/arm/dts/Makefile                 |   2 +
 arch/arm/dts/bcm6756.dtsi             | 130 ++++++++++++++++++++++++++
 arch/arm/dts/bcm96756.dts             |  30 ++++++
 arch/arm/mach-bcmbca/Kconfig          |   8 ++
 arch/arm/mach-bcmbca/Makefile         |   1 +
 arch/arm/mach-bcmbca/bcm6756/Kconfig  |  17 ++++
 arch/arm/mach-bcmbca/bcm6756/Makefile |   5 +
 board/broadcom/bcmbca/Kconfig         |  15 ++-
 configs/bcm96756_defconfig            |  22 +++++
 include/configs/bcm96756.h            |  12 +++
 11 files changed, 239 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/bcm6756.dtsi
 create mode 100644 arch/arm/dts/bcm96756.dts
 create mode 100644 arch/arm/mach-bcmbca/bcm6756/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm6756/Makefile
 create mode 100644 configs/bcm96756_defconfig
 create mode 100644 include/configs/bcm96756.h
MAINTAINERS +1 -0
index db16d0211c52..4d4b2f2ebb94 100644
@@ -219,6 +219,7 @@ F:	board/broadcom/bcmbca/
 N:	bcmbca
 N:	bcm[9]?47622
 N:	bcm[9]?63178
+N:	bcm[9]?6756
 N:	bcm[9]?6846
 N:	bcm[9]?6878
 
arch/arm/dts/Makefile +2 -0
index 281f92c841c0..f00bdb19675b 100644
@@ -1167,6 +1167,8 @@ dtb-$(CONFIG_BCM47622) += \
 	bcm947622.dtb
 dtb-$(CONFIG_BCM63178) += \
 	bcm963178.dtb
+dtb-$(CONFIG_BCM6756) += \
+	bcm96756.dtb
 dtb-$(CONFIG_BCM6846) += \
 	bcm96846.dtb
 dtb-$(CONFIG_BCM6878) += \
arch/arm/dts/bcm6756.dtsi new file +130 -0

130 lines not on this page · raw message

arch/arm/dts/bcm96756.dts new file +30 -0
new file mode 100644
index 000000000000..9a4a87ba9c8a
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
arch/arm/mach-bcmbca/Kconfig +8 -0
index 5b67975c4542..f3104116b336 100644
@@ -19,6 +19,13 @@ config BCM63178
 	select DM_SERIAL
 	select PL01X_SERIAL
 
+config BCM6756
+	bool "Support for Broadcom 6756 Family"
+	select SYS_ARCH_TIMER
+	select CPU_V7A
+	select DM_SERIAL
+	select PL01X_SERIAL
+
 config BCM6846
 	bool "Support for Broadcom 6846 Family"
 	select SYS_ARCH_TIMER
@@ -35,6 +42,7 @@ config BCM6878
 
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
 source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
+source "arch/arm/mach-bcmbca/bcm6756/Kconfig"
 source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
 source "arch/arm/mach-bcmbca/bcm6878/Kconfig"
 
arch/arm/mach-bcmbca/Makefile +1 -0
index 87710c66f9b7..5eb483c1671c 100644
@@ -5,5 +5,6 @@
 
 obj-$(CONFIG_BCM47622) += bcm47622/
 obj-$(CONFIG_BCM63178) += bcm63178/
+obj-$(CONFIG_BCM6756) += bcm6756/
 obj-$(CONFIG_BCM6846) += bcm6846/
 obj-$(CONFIG_BCM6878) += bcm6878/
arch/arm/mach-bcmbca/bcm6756/Kconfig new file +17 -0
new file mode 100644
index 000000000000..c83dcd0f3e2b
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM6756
+
+config TARGET_BCM96756
+	bool "Broadcom 6756 Reference Board"
+	depends on ARCH_BCMBCA
+
+config SYS_SOC
+	default "bcm6756"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
arch/arm/mach-bcmbca/bcm6756/Makefile new file +5 -0
new file mode 100644
index 000000000000..beb979af7520
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
board/broadcom/bcmbca/Kconfig +11 -4
index 2d95deec6666..89c02cf05418 100644
@@ -16,17 +16,17 @@ config SYS_CONFIG_NAME
 
 endif
 
-if TARGET_BCM96878
+if TARGET_BCM963178
 
 config SYS_CONFIG_NAME
-	default "bcm96878"
+	default "bcm963178"
 
 endif
 
-if TARGET_BCM963178
+if TARGET_BCM96756
 
 config SYS_CONFIG_NAME
-	default "bcm963178"
+	default "bcm96756"
 
 endif
 
@@ -36,3 +36,10 @@ config SYS_CONFIG_NAME
 	default "bcm96846"
 
 endif
+
+if TARGET_BCM96878
+
+config SYS_CONFIG_NAME
+	default "bcm96878"
+
+endif
configs/bcm96756_defconfig new file +22 -0
new file mode 100644
index 000000000000..95fcf4c51548
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM6756=y
+CONFIG_TARGET_BCM96756=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm96756"
+CONFIG_IDENT_STRING=" Broadcom BCM6756"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
include/configs/bcm96756.h new file +12 -0
new file mode 100644
index 000000000000..084333fedab9
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM96756_H
+#define __BCM96756_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define COUNTER_FREQUENCY		50000000
+
+#endif
Signature · 1 line
2.37.1
author maintainer
#7 lore raw

PATCH 5/5 arm: bcmbca: add bcm63148 SoC support

In reply to William Zhang

BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.

---

 MAINTAINERS                            |   1 +
 arch/arm/dts/Makefile                  |   2 +
 arch/arm/dts/bcm63148.dtsi             | 103 +++++++++++++++++++++++++
 arch/arm/dts/bcm963148.dts             |  30 +++++++
 arch/arm/mach-bcmbca/Kconfig           |   8 ++
 arch/arm/mach-bcmbca/Makefile          |   1 +
 arch/arm/mach-bcmbca/bcm63148/Kconfig  |  17 ++++
 arch/arm/mach-bcmbca/bcm63148/Makefile |   5 ++
 board/broadcom/bcmbca/Kconfig          |   7 ++
 configs/bcm963148_defconfig            |  22 ++++++
 include/configs/bcm963148.h            |  12 +++
 11 files changed, 208 insertions(+)
 create mode 100644 arch/arm/dts/bcm63148.dtsi
 create mode 100644 arch/arm/dts/bcm963148.dts
 create mode 100644 arch/arm/mach-bcmbca/bcm63148/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm63148/Makefile
 create mode 100644 configs/bcm963148_defconfig
 create mode 100644 include/configs/bcm963148.h
MAINTAINERS +1 -0
index 4d4b2f2ebb94..d1d13c733db4 100644
@@ -218,6 +218,7 @@ F:	arch/arm/mach-bcmbca/
 F:	board/broadcom/bcmbca/
 N:	bcmbca
 N:	bcm[9]?47622
+N:	bcm[9]?63148
 N:	bcm[9]?63178
 N:	bcm[9]?6756
 N:	bcm[9]?6846
arch/arm/dts/Makefile +2 -0
index f00bdb19675b..b8d136bd129b 100644
@@ -1165,6 +1165,8 @@ dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
 
 dtb-$(CONFIG_BCM47622) += \
 	bcm947622.dtb
+dtb-$(CONFIG_BCM63148) += \
+	bcm963148.dtb
 dtb-$(CONFIG_BCM63178) += \
 	bcm963178.dtb
 dtb-$(CONFIG_BCM6756) += \
arch/arm/dts/bcm63148.dtsi new file +103 -0

103 lines not on this page · raw message

arch/arm/dts/bcm963148.dts new file +30 -0
new file mode 100644
index 000000000000..98f6a6d09f50
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
arch/arm/mach-bcmbca/Kconfig +8 -0
index f3104116b336..9a29c4186bf0 100644
@@ -12,6 +12,13 @@ config BCM47622
 	select DM_SERIAL
 	select PL01X_SERIAL
 
+config BCM63148
+	bool "Support for Broadcom 63148 Family"
+	select SYS_ARCH_TIMER
+	select CPU_V7A
+	select DM_SERIAL
+	select BCM6345_SERIAL
+
 config BCM63178
 	bool "Support for Broadcom 63178 Family"
 	select SYS_ARCH_TIMER
@@ -41,6 +48,7 @@ config BCM6878
 	select PL01X_SERIAL
 
 source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
+source "arch/arm/mach-bcmbca/bcm63148/Kconfig"
 source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
 source "arch/arm/mach-bcmbca/bcm6756/Kconfig"
 source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
arch/arm/mach-bcmbca/Makefile +1 -0
index 5eb483c1671c..8a22f9ad975d 100644
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_BCM47622) += bcm47622/
+obj-$(CONFIG_BCM63148) += bcm63148/
 obj-$(CONFIG_BCM63178) += bcm63178/
 obj-$(CONFIG_BCM6756) += bcm6756/
 obj-$(CONFIG_BCM6846) += bcm6846/
arch/arm/mach-bcmbca/bcm63148/Kconfig new file +17 -0
new file mode 100644
index 000000000000..f81504c25cbb
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM63148
+
+config TARGET_BCM963148
+	bool "Broadcom 63148 Reference Board"
+	depends on ARCH_BCMBCA
+
+config SYS_SOC
+	default "bcm63148"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
arch/arm/mach-bcmbca/bcm63148/Makefile new file +5 -0
new file mode 100644
index 000000000000..beb979af7520
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
board/broadcom/bcmbca/Kconfig +7 -0
index 89c02cf05418..d070ebab707e 100644
@@ -16,6 +16,13 @@ config SYS_CONFIG_NAME
 
 endif
 
+if TARGET_BCM963148
+
+config SYS_CONFIG_NAME
+	default "bcm963148"
+
+endif
+
 if TARGET_BCM963178
 
 config SYS_CONFIG_NAME
configs/bcm963148_defconfig new file +22 -0
new file mode 100644
index 000000000000..7654b32117c1
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM63148=y
+CONFIG_TARGET_BCM963148=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm963148"
+CONFIG_IDENT_STRING=" Broadcom BCM63148"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
include/configs/bcm963148.h new file +12 -0
new file mode 100644
index 000000000000..8c1ef627b53a
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963148_H
+#define __BCM963148_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define COUNTER_FREQUENCY		50000000
+
+#endif
Signature · 1 line
2.37.1