Skip to contentSkip to conversation

serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()

PATCH New Sasha Levin 1 participant 5 messages Nov 23, 2022

Subsystems (6)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 2/5 xen/platform-pci: add missing free_irq() in error path

In reply to Sasha Levin

From: ruanjinjie <[email protected]>

[ Upstream commit c53717e1e3f0d0f9129b2e0dbc6dcc5e0a8132e9 ]

free_irq() is missing in case of error in platform_pci_probe(), fix that.

---
 drivers/xen/platform-pci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/xen/platform-pci.c +5 -2
index cf9666680c8c..20365b01c36b 100644
@@ -149,7 +149,7 @@ static int platform_pci_probe(struct pci_dev *pdev,
 		if (ret) {
 			dev_warn(&pdev->dev, "Unable to set the evtchn callback "
 					 "err=%d\n", ret);
-			goto out;
+			goto irq_out;
 		}
 	}
 
@@ -157,7 +157,7 @@ static int platform_pci_probe(struct pci_dev *pdev,
 	grant_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes);
 	ret = gnttab_setup_auto_xlat_frames(grant_frames);
 	if (ret)
-		goto out;
+		goto irq_out;
 	ret = gnttab_init();
 	if (ret)
 		goto grant_out;
@@ -165,6 +165,9 @@ static int platform_pci_probe(struct pci_dev *pdev,
 	return 0;
 grant_out:
 	gnttab_free_auto_xlat_frames();
+irq_out:
+	if (!xen_have_vector_callback)
+		free_irq(pdev->irq, pdev);
 out:
 	pci_release_region(pdev, 0);
 mem_out:
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/5 net: usb: qmi_wwan: add Telit 0x103a composition

In reply to Sasha Levin

From: Enrico Sau <[email protected]>

[ Upstream commit e103ba33998d0f25653cc8ebe745b68d1ee10cda ]

Add the following Telit LE910C4-WWX composition:

0x103a: rmnet

---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
index 547693118606..62eb45a819e7 100644
@@ -926,6 +926,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
 	{QMI_FIXED_INTF(0x2357, 0x9000, 4)},	/* TP-LINK MA260 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x103a, 0)}, /* Telit LE910C4-WWX */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)},	/* Telit LE922A */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)},	/* Telit FN980 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)},	/* Telit LN920 */
Signature · 1 line
2.35.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/5 serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()

From: Lukas Wunner <[email protected]>

[ Upstream commit 038ee49fef18710bedd38b531d173ccd746b2d8d ]

RS485-enabled UART ports on TI Sitara SoCs with active-low polarity exhibit a Transmit Enable glitch on ->set_termios():

omap8250_restore_regs(), which is called from omap_8250_set_termios(), sets the TCRTLR bit in the MCR register and clears all other bits, including RTS. If RTS uses active-low polarity, it is now asserted for no reason.

The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR register. That variable is always zero, so the RTS bit is still cleared (incorrectly so if RTS is active-high).

(up->mcr is not, as one might think, a cache of the MCR register's current value. Rather, it only caches a single bit of that register, the AFE bit. And it only does so if the UART supports the AFE bit, which OMAP does not. For details see serial8250_do_set_termios() and serial8250_do_set_mctrl().)

Finally at the end of omap8250_restore_regs(), the MCR register is restored (and RTS deasserted) by a call to up->port.ops->set_mctrl() (which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().

So there's an RTS glitch between setting TCRTLR and calling serial8250_em485_stop_tx(). Avoid by using a read-modify-write when setting TCRTLR.

While at it, drop a redundant initialization of up->mcr. As explained above, the variable isn't used by the driver and it is already initialized to zero because it is part of the static struct serial8250_ports[] declared in 8250_core.c. (Static structs are initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)

---
 drivers/tty/serial/8250/8250_omap.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/tty/serial/8250/8250_omap.c +4 -3
index c551407bee07..7795e6401a93 100644
@@ -259,6 +259,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 {
 	struct omap8250_priv *priv = up->port.private_data;
 	struct uart_8250_dma	*dma = up->dma;
+	u8 mcr = serial8250_in_MCR(up);
 
 	if (dma && dma->tx_running) {
 		/*
@@ -275,7 +276,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_EFR, UART_EFR_ECB);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
-	serial8250_out_MCR(up, UART_MCR_TCRTLR);
+	serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR);
 	serial_out(up, UART_FCR, up->fcr);
 
 	omap8250_update_scr(up, priv);
@@ -291,7 +292,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	/* drop TCR + TLR access, we setup XON/XOFF later */
-	serial8250_out_MCR(up, up->mcr);
+	serial8250_out_MCR(up, mcr);
+
 	serial_out(up, UART_IER, up->ier);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -600,7 +602,6 @@ static int omap_8250_startup(struct uart_port *port)
 
 	pm_runtime_get_sync(port->dev);
 
-	up->mcr = 0;
 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 
 	serial_out(up, UART_LCR, UART_LCR_WLEN8);
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/5 platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()

From: Xiongfeng Wang <[email protected]>

[ Upstream commit d0cdd85046b15089df71a50548617ac1025300d0 ]

pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before asus_wmi_set_xusb2pr() returns.

---
 drivers/platform/x86/asus-wmi.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/platform/x86/asus-wmi.c +2 -0
index 4ae758c3d8ba..9f6e462c57fe 100644
@@ -1111,6 +1111,8 @@ static void asus_wmi_set_xusb2pr(struct asus_wmi *asus)
 	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
 				cpu_to_le32(ports_available));
 
+	pci_dev_put(xhci_pdev);
+
 	pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n",
 			orig_ports_available, ports_available);
 }
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/5 tcp: configurable source port perturb table size

In reply to Sasha Levin

From: Gleb Mazovetskiy <[email protected]>

[ Upstream commit aeac4ec8f46d610a10adbaeff5e2edf6a88ffc62 ]

On embedded systems with little memory and no relevant security concerns, it is beneficial to reduce the size of the table.

Reducing the size from 2^16 to 2^8 saves 255 KiB of kernel RAM.

Makes the table size configurable as an expert option.

The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16").

---
 net/ipv4/Kconfig           | 10 ++++++++++
 net/ipv4/inet_hashtables.c | 10 +++++-----
 2 files changed, 15 insertions(+), 5 deletions(-)
net/ipv4/Kconfig +10 -0
index 4d265d4a0dbe..29be5bcbe7ac 100644
@@ -371,6 +371,16 @@ config INET_IPCOMP
 
 	  If unsure, say Y.
 
+config INET_TABLE_PERTURB_ORDER
+	int "INET: Source port perturbation table size (as power of 2)" if EXPERT
+	default 16
+	help
+	  Source port perturbation table size (as power of 2) for
+	  RFC 6056 3.3.4.  Algorithm 4: Double-Hash Port Selection Algorithm.
+
+	  The default is almost always what you want.
+	  Only change this if you know what you are doing.
+
 config INET_XFRM_TUNNEL
 	tristate
 	select INET_TUNNEL
net/ipv4/inet_hashtables.c +5 -5
index db47e1c407d9..9958850b6cee 100644
@@ -541,13 +541,13 @@ EXPORT_SYMBOL_GPL(inet_unhash);
  * Note that we use 32bit integers (vs RFC 'short integers')
  * because 2^16 is not a multiple of num_ephemeral and this
  * property might be used by clever attacker.
+ *
  * RFC claims using TABLE_LENGTH=10 buckets gives an improvement, though
- * attacks were since demonstrated, thus we use 65536 instead to really
- * give more isolation and privacy, at the expense of 256kB of kernel
- * memory.
+ * attacks were since demonstrated, thus we use 65536 by default instead
+ * to really give more isolation and privacy, at the expense of 256kB
+ * of kernel memory.
  */
-#define INET_TABLE_PERTURB_SHIFT 16
-#define INET_TABLE_PERTURB_SIZE (1 << INET_TABLE_PERTURB_SHIFT)
+#define INET_TABLE_PERTURB_SIZE (1 << CONFIG_INET_TABLE_PERTURB_ORDER)
 static u32 *table_perturb;
 
 int __inet_hash_connect(struct inet_timewait_death_row *death_row,
Signature · 1 line
2.35.1