arm: dts: k3-am64-main: Add GPMC and ELM nodes
PATCH 1/1 arm: dts: k3-am64-main: Add GPMC and ELM nodes
The GPMC is a unified memory controller dedicated for interfacing with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devices
The ELM module is used for GPMC NAND accesses for detecting and correcting errors during reads due to NAND bitflips errors.
4-, 8-, and 16-bit error-correction levels are supported using the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.
--- arch/arm/dts/k3-am64-main.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
arch/arm/dts/k3-am64-main.dtsi +26 -0
@@ -877,4 +877,30 @@ assigned-clocks = <&k3_clks 126 0>; assigned-clock-parents = <&k3_clks 126 2>; }; + + gpmc0: memory-controller@3b000000 { + compatible = "ti,am64-gpmc"; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 80 0>; + clock-names = "fck"; + reg = <0x00 0x03b000000 0x00 0x400>, + <0x00 0x050000000 0x00 0x8000000>; + reg-names = "cfg", "data"; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <3>; + gpmc,num-waitpins = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + elm0: ecc@25010000 { + compatible = "ti,am64-elm"; + reg = <0x00 0x25010000 0x00 0x2000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 54 0>; + clock-names = "fck"; + }; };
Signature · 1 line
2.34.1
Quoted 10 lines · Roger Quadros
The GPMC is a unified memory controller dedicated for interfacing with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devicesThe ELM module is used for GPMC NAND accesses for detecting and correcting errors during reads due to NAND bitflips errors.
Quoted 7 lines
4-, 8-, and 16-bit error-correction levels are supported using the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.
Signed-off-by Roger Quadros <[email protected]>--- arch/arm/dts/k3-am64-main.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
Can we get these changes by re-syncing the k3 dts files with the kernel?
Signature · 1 line
Tom
Quoted 15 lines · Tom Rini
Quoted 13 lines · Roger Quadros
The GPMC is a unified memory controller dedicated for interfacing with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devicesThe ELM module is used for GPMC NAND accesses for detecting and correcting errors during reads due to NAND bitflips errors.
4-, 8-, and 16-bit error-correction levels are supported using the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.
Quoted 7 lines
Quoted 4 lines
Signed-off-by Roger Quadros <[email protected]>--- arch/arm/dts/k3-am64-main.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)Can we get these changes by re-syncing the k3 dts files with the kernel?
Sure, will send an update.
cheers,
-roger