Skip to contentSkip to conversation

arm: dts: k3-am64-main: Add GPMC and ELM nodes

PATCH In review Roger Quadros 2 participants 3 messages Jan 4, 2023 – Jan 10, 2023 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: dts: k3-am64-main: Add GPMC and ELM nodes

The GPMC is a unified memory controller dedicated for interfacing with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devices

The ELM module is used for GPMC NAND accesses for detecting and correcting errors during reads due to NAND bitflips errors.

4-, 8-, and 16-bit error-correction levels are supported using the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.

---
 arch/arm/dts/k3-am64-main.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
arch/arm/dts/k3-am64-main.dtsi +26 -0
index 57b0f53ac96..43b0219f247 100644
@@ -877,4 +877,30 @@
 		assigned-clocks = <&k3_clks 126 0>;
 		assigned-clock-parents = <&k3_clks 126 2>;
 	};
+
+	gpmc0: memory-controller@3b000000 {
+		compatible = "ti,am64-gpmc";
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 80 0>;
+		clock-names = "fck";
+		reg = <0x00 0x03b000000 0x00 0x400>,
+		      <0x00 0x050000000 0x00 0x8000000>;
+		reg-names = "cfg", "data";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		gpmc,num-cs = <3>;
+		gpmc,num-waitpins = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	elm0: ecc@25010000 {
+		compatible = "ti,am64-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+	};
 };
Signature · 1 line
2.34.1
#1 lore raw
Quoted 10 lines · Roger Quadros

The GPMC is a unified memory controller dedicated for interfacing with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devices

The ELM module is used for GPMC NAND accesses for detecting and correcting errors during reads due to NAND bitflips errors.

Quoted 7 lines

4-, 8-, and 16-bit error-correction levels are supported using the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.

---
 arch/arm/dts/k3-am64-main.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Can we get these changes by re-syncing the k3 dts files with the kernel?

Signature · 1 line
Tom
#2 lore raw
Quoted 15 lines · Tom Rini
Quoted 13 lines · Roger Quadros

The GPMC is a unified memory controller dedicated for interfacing with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devices

The ELM module is used for GPMC NAND accesses for detecting and correcting errors during reads due to NAND bitflips errors.

4-, 8-, and 16-bit error-correction levels are supported using the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.

Quoted 7 lines
Quoted 4 lines
---
 arch/arm/dts/k3-am64-main.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Can we get these changes by re-syncing the k3 dts files with the kernel?

Sure, will send an update.

cheers,
-roger