fpga: add initial KUnit test suite for the subsystem
cover fpga: add initial KUnit test suite for the subsystem
This patch set introduces a KUnit suite to test the core components of the FPGA subsystem. More specifically, the suite tests the core functions of the FPGA manager, FPGA bridge, and FPGA region.
These components are tested using "fake" modules that allow observing their internals without altering the source code.
The test suite can be run using
[user@localhost linux]$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/fpga/tests
Marco Pagani (4):
fpga: add initial KUnit test suite
fpga: add fake FPGA region
fpga: add fake FPGA manager
fpga: add fake FPGA bridge
drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fake-fpga-bridge.c | 214 +++++++++++++++ drivers/fpga/tests/fake-fpga-bridge.h | 36 +++ drivers/fpga/tests/fake-fpga-mgr.c | 365 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-mgr.h | 42 +++ drivers/fpga/tests/fake-fpga-region.c | 186 +++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++ drivers/fpga/tests/fpga-tests.c | 264 +++++++++++++++++++ 12 files changed, 1175 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fake-fpga-bridge.c create mode 100644 drivers/fpga/tests/fake-fpga-bridge.h create mode 100644 drivers/fpga/tests/fake-fpga-mgr.c create mode 100644 drivers/fpga/tests/fake-fpga-mgr.h create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.h create mode 100644 drivers/fpga/tests/fpga-tests.c
Signature · 1 line
2.39.1
RFC PATCH 1/4 fpga: add initial KUnit test suite
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.c
drivers/fpga/Kconfig +2 -0
@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGA
drivers/fpga/Makefile +3 -0
@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/
drivers/fpga/tests/.kunitconfig new file +5 -0
@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=y
drivers/fpga/tests/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".
drivers/fpga/tests/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.o
drivers/fpga/tests/fpga-tests.c new file +264 -0
264 lines not on this page · raw message
Signature · 1 line
2.39.1
Re: [RFC PATCH 1/4] fpga: add initial KUnit test suite
Hi Marco,
I've just started looking at this, but I have a couple of early comments below
Quoted 69 lines · Marco Pagani
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.cdrivers/fpga/Kconfig +2
-0@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGAdrivers/fpga/Makefile +3
-0@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=ydrivers/fpga/tests/Kconfig new file +0
-0
drivers/fpga/tests/Kconfig line 9
Quoted 9 lines
drivers/fpga/tests/Kconfig new file +9
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers.
These lines seem shorter than necessary. You can use up to 75 characters per line.
Quoted 278 lines
drivers/fpga/tests/Kconfig new file +6
-0+ + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".drivers/fpga/tests/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.odrivers/fpga/tests/fpga-tests.c new file +254
-0@@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Test suite for the FPGA subsystem +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <kunit/test.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> + +#include "fake-fpga-region.h" +#include "fake-fpga-bridge.h" +#include "fake-fpga-mgr.h" + +#define FAKE_BIT_BLOCKS 16 +#define FAKE_BIT_SIZE (FPGA_TEST_BIT_BLOCK * FAKE_BIT_BLOCKS) + +static u8 fake_bit[FAKE_BIT_SIZE ]; + +static int init_sgt_bit (struct sg_table *sgt,void *bit,size_t len) +{ +int ret; + + ret =sg_alloc_table (sgt,1 ,GFP_KERNEL ); +if (ret) +return ret; + +sg_init_one (sgt->sgl, bit, len); + +return ret; +} + +static void free_sgt_bit (struct sg_table *sgt) +{ +if (sgt) +sg_free_table (sgt); +} + +static void fpga_build_base_sys (struct kunit *test,struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +int ret; + + ret =fake_fpga_mgr_register (mgr_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (bridge_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (region_ctx, mgr_ctx->mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (region_ctx, bridge_ctx->bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); +} + +static void fpga_free_base_sys (struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +if (region_ctx) +fake_fpga_region_unregister (region_ctx); + +if (bridge_ctx) +fake_fpga_bridge_unregister (bridge_ctx); + +if (region_ctx) +fake_fpga_mgr_unregister (mgr_ctx); +} + +static int fpga_suite_init (struct kunit_suite *suite) +{ +fake_fpga_mgr_fill_header (fake_bit); + +return 0 ; +} + +static void fpga_base_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fpga_image_info *test_img_info; + +struct sg_table sgt_bit; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + test_img_info->buf = fake_bit; + test_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_img_info); + +/* Allocate another fake test image using a scatter list */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + ret =init_sgt_bit (&sgt_bit, fake_bit,FAKE_BIT_SIZE ); +KUNIT_ASSERT_EQ (test, ret,0 ); + + test_img_info->sgt = &sgt_bit; + +/* Re-program the fake FPGA using the image scatter list */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_sg (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +free_sgt_bit (&sgt_bit); +fpga_image_info_free (test_img_info); +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx); +} + +static void fpga_pr_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fake_fpga_bridge pr_bridge_0_ctx; +struct fake_fpga_bridge pr_bridge_1_ctx; +struct fake_fpga_region pr_region_ctx; + +struct fpga_image_info *test_static_img_info; +struct fpga_image_info *test_pr_img_info; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_static_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_static_img_info); + + test_static_img_info->buf = fake_bit; + test_static_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_static_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_static_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* The static image contains a reconfigurable sub-region with two soft bridges */ + ret =fake_fpga_bridge_register (&pr_bridge_0_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (&pr_bridge_1_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (&pr_region_ctx, mgr_ctx.mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_0_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_1_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + +/* Allocate a fake partial test image using a buffer */ + test_pr_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_pr_img_info); + + test_pr_img_info->buf = fake_bit; + test_pr_img_info->count =sizeof (fake_bit) /2 ; + test_pr_img_info->flags =FPGA_MGR_PARTIAL_RECONFIG ; + +kunit_info (test,"fake partial bitstream size: %zu\n" , test_pr_img_info->count); + +/* Program the reconfigurable sub-region */ + pr_region_ctx.region->info = test_pr_img_info; + ret =fpga_region_program_fpga (pr_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_0_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_0_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_1_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_1_ctx)); + +/* Check that the base bridge has not been disabled */ +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_pr_img_info); +fpga_image_info_free (test_static_img_info); + +fake_fpga_region_unregister (&pr_region_ctx); +fake_fpga_bridge_unregister (&pr_bridge_0_ctx); +fake_fpga_bridge_unregister (&pr_bridge_1_ctx); + +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx); +} + +static struct kunit_case fpga_test_cases[] = { +KUNIT_CASE (fpga_base_test), +KUNIT_CASE (fpga_pr_test),
drivers/fpga/tests/fpga-tests.c line 264
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+ {}, +}; + +static struct kunit_suite fpga_test_suite = { + .name ="fpga-tests" , + .suite_init = fpga_suite_init, + .test_cases = fpga_test_cases, +}; + +kunit_test_suite (fpga_test_suite);
When I try to build with these patches, I get this error:
Quoted 2 lines
ERROR: modpost: missing
MODULE_LICENSE()indrivers/fpga/tests/fpga-tests.o
I was able to fix it by adding this line at the bottom of the file:
Quoted 1 line
MODULE_LICENSE("GPL");
- Russ
Re: [RFC PATCH 1/4] fpga: add initial KUnit test suite
Quoted 4 lines · Russ Weight
Hi Marco,
I've just started looking at this, but I have a couple of early comments below
Thanks for looking into this.
[...]
Quoted 6 lines
Quoted 6 lines
drivers/fpga/tests/Kconfig new file +3
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT
Quoted 9 lines
drivers/fpga/tests/Kconfig line 9
Quoted 6 lines
drivers/fpga/tests/Kconfig new file +6
-0+ default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers.These lines seem shorter than necessary. You can use up to 75 characters per line.
I'll reflow the text in the next revision.
[...]
Quoted 16 lines
drivers/fpga/tests/Kconfig
Quoted 13 lines
drivers/fpga/tests/Kconfig new file +13
-0+static struct kunit_case fpga_test_cases[] = { + KUNIT_CASE(fpga_base_test), + KUNIT_CASE(fpga_pr_test), + {}, +}; + +static struct kunit_suite fpga_test_suite = { + .name = "fpga-tests", + .suite_init = fpga_suite_init, + .test_cases = fpga_test_cases, +}; + +kunit_test_suite(fpga_test_suite);When I try to build with these patches, I get this error:
Quoted 1 line
Quoted 8 lines
Quoted 1 line
ERROR: modpost: missing
MODULE_LICENSE()indrivers/fpga/tests/fpga-tests.oI was able to fix it by adding this line at the bottom of the file:
Quoted 1 line
MODULE_LICENSE("GPL");- Russ
Right, I forgot to add module info macros to the test suite module. I'll add MODULE_LICENSE() in the next revision.
Thanks for the feedback,
Marco
Re: [RFC PATCH 1/4] fpga: add initial KUnit test suite
In reply to Marco PaganiQuoted 117 lines · Marco Pagani
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.cdrivers/fpga/Kconfig +2
-0@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGAdrivers/fpga/Makefile +3
-0@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=ydrivers/fpga/tests/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".drivers/fpga/tests/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.odrivers/fpga/tests/fpga-tests.c new file +15
-0@@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Test suite for the FPGA subsystem +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <kunit/test.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h>
drivers/fpga/tests/fpga-tests.c line 25
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+#include <linux/fpga/fpga-bridge.h> + +#include "fake-fpga-region.h" +#include "fake-fpga-bridge.h" +#include "fake-fpga-mgr.h" + +#define FAKE_BIT_BLOCKS 16 +#define FAKE_BIT_SIZE (FPGA_TEST_BIT_BLOCK * FAKE_BIT_BLOCKS) + +static u8 fake_bit[FAKE_BIT_SIZE ];
I take it "bit" in fake_bit and sgt_bit is short for "bitstream". Initially, I found this confusing as I tend to think of a bit as a single bit. It might be better to expand that something like "fake_bitstream" or "fake_image".
- Russ
Quoted 239 lines
drivers/fpga/tests/fpga-tests.c new file +239
-0+ +static int init_sgt_bit (struct sg_table *sgt,void *bit,size_t len) +{ +int ret; + + ret =sg_alloc_table (sgt,1 ,GFP_KERNEL ); +if (ret) +return ret; + +sg_init_one (sgt->sgl, bit, len); + +return ret; +} + +static void free_sgt_bit (struct sg_table *sgt) +{ +if (sgt) +sg_free_table (sgt); +} + +static void fpga_build_base_sys (struct kunit *test,struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +int ret; + + ret =fake_fpga_mgr_register (mgr_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (bridge_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (region_ctx, mgr_ctx->mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (region_ctx, bridge_ctx->bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); +} + +static void fpga_free_base_sys (struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +if (region_ctx) +fake_fpga_region_unregister (region_ctx); + +if (bridge_ctx) +fake_fpga_bridge_unregister (bridge_ctx); + +if (region_ctx) +fake_fpga_mgr_unregister (mgr_ctx); +} + +static int fpga_suite_init (struct kunit_suite *suite) +{ +fake_fpga_mgr_fill_header (fake_bit); + +return 0 ; +} + +static void fpga_base_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fpga_image_info *test_img_info; + +struct sg_table sgt_bit; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + test_img_info->buf = fake_bit; + test_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_img_info); + +/* Allocate another fake test image using a scatter list */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + ret =init_sgt_bit (&sgt_bit, fake_bit,FAKE_BIT_SIZE ); +KUNIT_ASSERT_EQ (test, ret,0 ); + + test_img_info->sgt = &sgt_bit; + +/* Re-program the fake FPGA using the image scatter list */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_sg (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +free_sgt_bit (&sgt_bit); +fpga_image_info_free (test_img_info); +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx); +} + +static void fpga_pr_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fake_fpga_bridge pr_bridge_0_ctx; +struct fake_fpga_bridge pr_bridge_1_ctx; +struct fake_fpga_region pr_region_ctx; + +struct fpga_image_info *test_static_img_info; +struct fpga_image_info *test_pr_img_info; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_static_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_static_img_info); + + test_static_img_info->buf = fake_bit; + test_static_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_static_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_static_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* The static image contains a reconfigurable sub-region with two soft bridges */ + ret =fake_fpga_bridge_register (&pr_bridge_0_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (&pr_bridge_1_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (&pr_region_ctx, mgr_ctx.mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_0_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_1_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + +/* Allocate a fake partial test image using a buffer */ + test_pr_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_pr_img_info); + + test_pr_img_info->buf = fake_bit; + test_pr_img_info->count =sizeof (fake_bit) /2 ; + test_pr_img_info->flags =FPGA_MGR_PARTIAL_RECONFIG ; + +kunit_info (test,"fake partial bitstream size: %zu\n" , test_pr_img_info->count); + +/* Program the reconfigurable sub-region */ + pr_region_ctx.region->info = test_pr_img_info; + ret =fpga_region_program_fpga (pr_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_0_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_0_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_1_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_1_ctx)); + +/* Check that the base bridge has not been disabled */ +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_pr_img_info); +fpga_image_info_free (test_static_img_info); + +fake_fpga_region_unregister (&pr_region_ctx); +fake_fpga_bridge_unregister (&pr_bridge_0_ctx); +fake_fpga_bridge_unregister (&pr_bridge_1_ctx); + +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx); +} + +static struct kunit_case fpga_test_cases[] = { +KUNIT_CASE (fpga_base_test), +KUNIT_CASE (fpga_pr_test), + {}, +}; + +static struct kunit_suite fpga_test_suite = { + .name ="fpga-tests" , + .suite_init = fpga_suite_init, + .test_cases = fpga_test_cases, +}; + +kunit_test_suite (fpga_test_suite);
Re: [RFC PATCH 1/4] fpga: add initial KUnit test suite
Quoted 135 lines · Russ Weight
Quoted 117 lines · Marco Pagani
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.cdrivers/fpga/Kconfig +2
-0@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGAdrivers/fpga/Makefile +3
-0@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=ydrivers/fpga/tests/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".drivers/fpga/tests/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.odrivers/fpga/tests/fpga-tests.c new file +15
-0@@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Test suite for the FPGA subsystem +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <kunit/test.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> drivers/fpga/tests/fpga-tests.c line 25
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+#include <linux/fpga/fpga-bridge.h> + +#include "fake-fpga-region.h" +#include "fake-fpga-bridge.h" +#include "fake-fpga-mgr.h" + +#define FAKE_BIT_BLOCKS 16 +#define FAKE_BIT_SIZE (FPGA_TEST_BIT_BLOCK * FAKE_BIT_BLOCKS) + +static u8 fake_bit[FAKE_BIT_SIZE ];I take it "bit" in
fake_bitandsgt_bitis short for "bitstream". Initially, I found this confusing as I tend to think of a bit as a single bit. It might be better to expand that something like "fake_bitstream" or "fake_image".
Quoted 1 line
- Russ
You're right. Using "bit" in the name can be confusing. I'll change it to "fake_image" or maybe "fake_image_buf" to be consistent with the naming convention used in the subsystem. I'll also change "test_img_info" to "fake_img_info" to improve naming consistency.
Thanks,
Marco
Xu Yilun
maintainerRe: [RFC PATCH 1/4] fpga: add initial KUnit test suite
In reply to Marco PaganiQuoted 2 lines · Marco Pagani
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
I'm not familiar with kunit, and I spend some time to read the Documentation/dev-tools/kunit/, sorry for late response.
Quoted 88 lines
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.cdrivers/fpga/Kconfig +2
-0@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGAdrivers/fpga/Makefile +3
-0@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=ydrivers/fpga/tests/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".drivers/fpga/tests/Makefile new file +0
-0
drivers/fpga/tests/Makefile line 5
Quoted 5 lines
drivers/fpga/tests/Makefile new file +5
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.o
It is better the patches for fake components come first, otherwise may break the compilation. Also not friendly for review.
drivers/fpga/tests/Makefile line 6
Quoted 1 line
drivers/fpga/tests/Makefile new file +1
-0+obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.o
Maybe fpga-test.o?
And could they be built in a single module? I haven't find a reason these fake components been used alone.
Quoted 77 lines
drivers/fpga/tests/fpga-tests.c new file +71
-0@@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Test suite for the FPGA subsystem +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <kunit/test.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> + +#include "fake-fpga-region.h" +#include "fake-fpga-bridge.h" +#include "fake-fpga-mgr.h" + +#define FAKE_BIT_BLOCKS 16 +#define FAKE_BIT_SIZE (FPGA_TEST_BIT_BLOCK * FAKE_BIT_BLOCKS) + +static u8 fake_bit[FAKE_BIT_SIZE ]; + +static int init_sgt_bit (struct sg_table *sgt,void *bit,size_t len) +{ +int ret; + + ret =sg_alloc_table (sgt,1 ,GFP_KERNEL ); +if (ret) +return ret; + +sg_init_one (sgt->sgl, bit, len); + +return ret; +} + +static void free_sgt_bit (struct sg_table *sgt) +{ +if (sgt) +sg_free_table (sgt); +} + +static void fpga_build_base_sys (struct kunit *test,struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +int ret; + + ret =fake_fpga_mgr_register (mgr_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (bridge_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (region_ctx, mgr_ctx->mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (region_ctx, bridge_ctx->bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); +} + +static void fpga_free_base_sys (struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +if (region_ctx) +fake_fpga_region_unregister (region_ctx); +
drivers/fpga/tests/fpga-tests.c line 81
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+if (bridge_ctx) +fake_fpga_bridge_unregister (bridge_ctx); + +if (region_ctx) +fake_fpga_mgr_unregister (mgr_ctx); +} + +static int fpga_suite_init (struct kunit_suite *suite) +{ +fake_fpga_mgr_fill_header (fake_bit);
Do we need to run it before every case? Or just run once for all cases?
Quoted 42 lines
drivers/fpga/tests/fpga-tests.c new file +42
-0+ +return 0 ; +} + +static void fpga_base_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fpga_image_info *test_img_info; + +struct sg_table sgt_bit; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + test_img_info->buf = fake_bit; + test_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx));
drivers/fpga/tests/fpga-tests.c line 133
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_img_info); + +/* Allocate another fake test image using a scatter list */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + ret =init_sgt_bit (&sgt_bit, fake_bit,FAKE_BIT_SIZE ); +KUNIT_ASSERT_EQ (test, ret,0 );
This is not fpga function, do we need the ASSERT?
Quoted 26 lines
drivers/fpga/tests/fpga-tests.c new file +26
-0+ + test_img_info->sgt = &sgt_bit; + +/* Re-program the fake FPGA using the image scatter list */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_sg (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +free_sgt_bit (&sgt_bit); +fpga_image_info_free (test_img_info); +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx); +} + +static void fpga_pr_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx;
drivers/fpga/tests/fpga-tests.c line 169
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+struct fake_fpga_region base_region_ctx; + +struct fake_fpga_bridge pr_bridge_0_ctx; +struct fake_fpga_bridge pr_bridge_1_ctx; +struct fake_fpga_region pr_region_ctx; + +struct fpga_image_info *test_static_img_info; +struct fpga_image_info *test_pr_img_info; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx);
If we need the base region/bridge/mgr for each case, could we create global ones in .init(), or .suite_init()?
drivers/fpga/tests/fpga-tests.c line 176
Quoted 7 lines
drivers/fpga/tests/fpga-tests.c new file +7
-0+ +/* Allocate a fake test image using a buffer */ + test_static_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_static_img_info); + + test_static_img_info->buf = fake_bit; + test_static_img_info->count =sizeof (fake_bit);
Same concern, may remove the test image info initialization from each test case code.
Quoted 11 lines
drivers/fpga/tests/fpga-tests.c new file +11
-0+ +kunit_info (test,"fake bitstream size: %zu\n" , test_static_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_static_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region);
drivers/fpga/tests/fpga-tests.c line 197
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* The static image contains a reconfigurable sub-region with two soft bridges */
Till now I didn't find any difference with fpga_base_test. And I can't figure out how the "static parent region - sub pr region" topology is created?
Quoted 42 lines
drivers/fpga/tests/fpga-tests.c new file +42
-0+ ret =fake_fpga_bridge_register (&pr_bridge_0_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (&pr_bridge_1_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (&pr_region_ctx, mgr_ctx.mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_0_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_1_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + +/* Allocate a fake partial test image using a buffer */ + test_pr_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_pr_img_info); + + test_pr_img_info->buf = fake_bit; + test_pr_img_info->count =sizeof (fake_bit) /2 ; + test_pr_img_info->flags =FPGA_MGR_PARTIAL_RECONFIG ; + +kunit_info (test,"fake partial bitstream size: %zu\n" , test_pr_img_info->count); + +/* Program the reconfigurable sub-region */ + pr_region_ctx.region->info = test_pr_img_info; + ret =fpga_region_program_fpga (pr_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_0_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_0_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_1_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_1_ctx)); + +/* Check that the base bridge has not been disabled */ +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx));
drivers/fpga/tests/fpga-tests.c line 249
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_pr_img_info); +fpga_image_info_free (test_static_img_info); + +fake_fpga_region_unregister (&pr_region_ctx); +fake_fpga_bridge_unregister (&pr_bridge_0_ctx); +fake_fpga_bridge_unregister (&pr_bridge_1_ctx); + +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx);
Same concern, may put them in .exit() or suite_exit()?
drivers/fpga/tests/fpga-tests.c line 254
Quoted 5 lines
drivers/fpga/tests/fpga-tests.c new file +5
-0+} + +static struct kunit_case fpga_test_cases[] = { +KUNIT_CASE (fpga_base_test), +KUNIT_CASE (fpga_pr_test),
I feel there are too many tasks for each test case, and some duplicated routines.
Could we have a suite for the common routine test in each case, like region/bridge/mgr (un)register, fpga image alloc ... And another suite which have these common routines in .init() or .suite_init().
drivers/fpga/tests/fpga-tests.c line 259
Quoted 5 lines
drivers/fpga/tests/fpga-tests.c new file +5
-0+ {}, +}; + +static struct kunit_suite fpga_test_suite = { + .name ="fpga-tests" ,
I see from style.rst that:
"Names should use underscores, not dashes, to separate words"
and
"*Do not* include "test" or "kunit" directly in the subsystem name
unless we are actually testing other tests or the kunit framework itself"
So IIUC I assume the name should be "fpga"?
BTW: I do see some existing test cases that are not conform to the style, even the examples in doc itself.
Thanks,
Yilun
Quoted 8 lines
drivers/fpga/tests/fpga-tests.c new file +5
-0+ .suite_init = fpga_suite_init, + .test_cases = fpga_test_cases, +}; + +kunit_test_suite (fpga_test_suite);Signature · 1 line
2.39.1
Re: [RFC PATCH 1/4] fpga: add initial KUnit test suite
Quoted 6 lines · Xu Yilun
Quoted 2 lines · Marco Pagani
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
I'm not familiar with kunit, and I spend some time to read the
Documentation/dev-tools/kunit/, sorry for late response.
Thank you for reviewing.
Quoted 89 lines
Quoted 89 lines
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.cdrivers/fpga/Kconfig +2
-0@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGAdrivers/fpga/Makefile +3
-0@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=ydrivers/fpga/tests/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".drivers/fpga/tests/Makefile new file +0
-0@@ -0,0 +1,6 @@
Quoted 8 lines
drivers/fpga/tests/Makefile line 5
Quoted 5 lines
drivers/fpga/tests/Makefile new file +5
-0+# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.oIt is better the patches for fake components come first, otherwise may break the compilation. Also not friendly for review.
Sorry. I'll change the order in the next version.
Quoted 4 lines
drivers/fpga/tests/Makefile line 6
Quoted 2 lines
drivers/fpga/tests/Makefile new file +1
-0+obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.oMaybe fpga-test.o?
I'll change the name in the next version.
Quoted 4 lines
And could they be built in a single module? I haven't find a reason these fake components been used alone.
My feeling is that they could also come in handy to do some general development or testing on the subsystem. For instance, I used the fake FPGA manager in isolation to experiment with the OF region.
Initially, the fake manager also had an of_device_id device matching struct. However, I later removed it because it was not used for the test setup, and I was not sure if adding an OF device matching struct was acceptable for a test driver.
Quoted 81 lines
Quoted 81 lines
drivers/fpga/tests/fpga-tests.c new file +75
-0@@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Test suite for the FPGA subsystem +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <kunit/test.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> + +#include "fake-fpga-region.h" +#include "fake-fpga-bridge.h" +#include "fake-fpga-mgr.h" + +#define FAKE_BIT_BLOCKS 16 +#define FAKE_BIT_SIZE (FPGA_TEST_BIT_BLOCK * FAKE_BIT_BLOCKS) + +static u8 fake_bit[FAKE_BIT_SIZE ]; + +static int init_sgt_bit (struct sg_table *sgt,void *bit,size_t len) +{ +int ret; + + ret =sg_alloc_table (sgt,1 ,GFP_KERNEL ); +if (ret) +return ret; + +sg_init_one (sgt->sgl, bit, len); + +return ret; +} + +static void free_sgt_bit (struct sg_table *sgt) +{ +if (sgt) +sg_free_table (sgt); +} + +static void fpga_build_base_sys (struct kunit *test,struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +int ret; + + ret =fake_fpga_mgr_register (mgr_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (bridge_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (region_ctx, mgr_ctx->mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (region_ctx, bridge_ctx->bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); +} + +static void fpga_free_base_sys (struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +if (region_ctx) +fake_fpga_region_unregister (region_ctx); + +if (bridge_ctx) +fake_fpga_bridge_unregister (bridge_ctx); + +if (region_ctx)
Quoted 9 lines
drivers/fpga/tests/fpga-tests.c line 81
Quoted 6 lines
drivers/fpga/tests/fpga-tests.c new file +6
-0+fake_fpga_mgr_unregister (mgr_ctx); +} + +static int fpga_suite_init (struct kunit_suite *suite) +{ +fake_fpga_mgr_fill_header (fake_bit);Do we need to run it before every case? Or just run once for all cases?
Just once for all cases. So I'm calling it from the suite_init function.
For the next version, I'm thinking of allocating the image buffer using kunit_kzalloc() instead of using a global static array.
Quoted 46 lines
Quoted 46 lines
drivers/fpga/tests/fpga-tests.c new file +46
-0+ +return 0 ; +} + +static void fpga_base_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fpga_image_info *test_img_info; + +struct sg_table sgt_bit; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + test_img_info->buf = fake_bit; + test_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_img_info); +
Quoted 9 lines
drivers/fpga/tests/fpga-tests.c line 133
Quoted 6 lines
drivers/fpga/tests/fpga-tests.c new file +6
-0+/* Allocate another fake test image using a scatter list */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + ret =init_sgt_bit (&sgt_bit, fake_bit,FAKE_BIT_SIZE ); +KUNIT_ASSERT_EQ (test, ret,0 );This is not fpga function, do we need the ASSERT?
You're right. I'll change it to EXPECT.
Quoted 31 lines
Quoted 31 lines
drivers/fpga/tests/fpga-tests.c new file +31
-0+ + test_img_info->sgt = &sgt_bit; + +/* Re-program the fake FPGA using the image scatter list */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_sg (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +free_sgt_bit (&sgt_bit); +fpga_image_info_free (test_img_info); +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx); +} + +static void fpga_pr_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fake_fpga_bridge pr_bridge_0_ctx; +struct fake_fpga_bridge pr_bridge_1_ctx; +struct fake_fpga_region pr_region_ctx;
Quoted 9 lines
drivers/fpga/tests/fpga-tests.c line 169
Quoted 5 lines
drivers/fpga/tests/fpga-tests.c new file +5
-0+ +struct fpga_image_info *test_static_img_info; +struct fpga_image_info *test_pr_img_info; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx);If we need the base region/bridge/mgr for each case, could we create global ones in .init(), or .suite_init()?
Ok, I'll reduce code duplication in the next version. My only concern is that I would not want to complicate the test code.
In my intentions, this is just an initial set of tests intended to lay the foundation for other test suites. At this stage, I'm not sure if other tests will need or use this kind of setup. So I would like to keep the test code as simple as possible.
Quoted 11 lines
drivers/fpga/tests/fpga-tests.c line 176
Quoted 7 lines
drivers/fpga/tests/fpga-tests.c new file +7
-0+ +/* Allocate a fake test image using a buffer */ + test_static_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_static_img_info); + + test_static_img_info->buf = fake_bit; + test_static_img_info->count =sizeof (fake_bit);Same concern, may remove the test image info initialization from each test case code.
Same as above, I'll reduce code duplication in the next version.
Quoted 17 lines
Quoted 17 lines
drivers/fpga/tests/fpga-tests.c new file +17
-0+ +kunit_info (test,"fake bitstream size: %zu\n" , test_static_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_static_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); +
Quoted 9 lines
drivers/fpga/tests/fpga-tests.c line 197
Quoted 4 lines
drivers/fpga/tests/fpga-tests.c new file +4
-0+KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* The static image contains a reconfigurable sub-region with two soft bridges */ Till now I didn't find any difference with
fpga_base_test. And I can't figure out how the "static parent region - sub pr region" topology is created?
You're right, the topology is missing. I'm preparing a new version where regions are hierarchically organized according to the FPGA Region DT binding documentation. I.e., the static region is the parent device of the reconfigurable region.
Quoted 46 lines
Quoted 46 lines
drivers/fpga/tests/fpga-tests.c new file +46
-0+ ret =fake_fpga_bridge_register (&pr_bridge_0_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (&pr_bridge_1_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (&pr_region_ctx, mgr_ctx.mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_0_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (&pr_region_ctx, pr_bridge_1_ctx.bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); + +/* Allocate a fake partial test image using a buffer */ + test_pr_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_pr_img_info); + + test_pr_img_info->buf = fake_bit; + test_pr_img_info->count =sizeof (fake_bit) /2 ; + test_pr_img_info->flags =FPGA_MGR_PARTIAL_RECONFIG ; + +kunit_info (test,"fake partial bitstream size: %zu\n" , test_pr_img_info->count); + +/* Program the reconfigurable sub-region */ + pr_region_ctx.region->info = test_pr_img_info; + ret =fpga_region_program_fpga (pr_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,2 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_0_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_0_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&pr_bridge_1_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&pr_bridge_1_ctx)); + +/* Check that the base bridge has not been disabled */ +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_pr_img_info); +fpga_image_info_free (test_static_img_info);
Quoted 8 lines
drivers/fpga/tests/fpga-tests.c line 249
Quoted 6 lines
drivers/fpga/tests/fpga-tests.c new file +6
-0+ +fake_fpga_region_unregister (&pr_region_ctx); +fake_fpga_bridge_unregister (&pr_bridge_0_ctx); +fake_fpga_bridge_unregister (&pr_bridge_1_ctx); + +fpga_free_base_sys (&mgr_ctx, &base_bridge_ctx, &base_region_ctx);Same concern, may put them in .exit() or
suite_exit()?
Same as above, I'll reduce code duplication.
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c line 254
Quoted 6 lines
drivers/fpga/tests/fpga-tests.c new file +5
-0+} + +static struct kunit_case fpga_test_cases[] = { +KUNIT_CASE (fpga_base_test), +KUNIT_CASE (fpga_pr_test),I feel there are too many tasks for each test case, and some duplicated routines.
Quoted 4 lines
Could we have a suite for the common routine test in each case, like region/bridge/mgr (un)register, fpga image alloc ... And another suite which have these common routines in .init() or .suite_init().
Right, I'll reduce code duplication in the next version.
Quoted 12 lines
drivers/fpga/tests/fpga-tests.c line 259
Quoted 5 lines
drivers/fpga/tests/fpga-tests.c new file +5
-0+ {}, +}; + +static struct kunit_suite fpga_test_suite = { + .name ="fpga-tests" ,I see from
style.rstthat:"Names should use underscores, not dashes, to separate words"
and
Quoted 8 lines
"*Do not* include "test" or "kunit" directly in the subsystem name
unless we are actually testing other tests or the kunit framework itself"So IIUC I assume the name should be "fpga"?
BTW: I do see some existing test cases that are not conform to the style, even the examples in doc itself.
Thanks for noticing this. I'll change the name in the next version.
Quoted 4 lines
Thanks,
Yilun
Quoted 9 lines
Quoted 8 lines
drivers/fpga/tests/fpga-tests.c new file +5
-0+ .suite_init = fpga_suite_init, + .test_cases = fpga_test_cases, +}; + +kunit_test_suite (fpga_test_suite);Signature · 1 line
2.39.1
Thanks,
Marco
Xu Yilun
maintainerRe: [RFC PATCH 1/4] fpga: add initial KUnit test suite
Quoted 120 lines · Marco Pagani
Quoted 6 lines · Xu Yilun
Quoted 2 lines · Marco Pagani
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
I'm not familiar with kunit, and I spend some time to read the
Documentation/dev-tools/kunit/, sorry for late response.Thank you for reviewing.
Quoted 89 lines
Quoted 89 lines
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.cdrivers/fpga/Kconfig +2
-0@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGAdrivers/fpga/Makefile +3
-0@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=ydrivers/fpga/tests/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".drivers/fpga/tests/Makefile new file +0
-0@@ -0,0 +1,6 @@Quoted 8 lines
drivers/fpga/tests/Makefile line 5
Quoted 5 lines
drivers/fpga/tests/Makefile new file +5
-0+# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.oIt is better the patches for fake components come first, otherwise may break the compilation. Also not friendly for review.
Sorry. I'll change the order in the next version.
Quoted 4 lines
drivers/fpga/tests/Makefile line 6
Quoted 2 lines
drivers/fpga/tests/Makefile new file +1
-0+obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.oMaybe fpga-test.o?
I'll change the name in the next version.
Quoted 1 line
Quoted 7 lines
Quoted 3 lines
And could they be built in a single module? I haven't find a reason these fake components been used alone.
My feeling is that they could also come in handy to do some general development or testing on the subsystem. For instance, I used the fake FPGA manager in isolation to experiment with the OF region.
That's fine.
Quoted 158 lines
Initially, the fake manager also had an
of_device_iddevice matching struct. However, I later removed it because it was not used for the test setup, and I was not sure if adding an OF device matching struct was acceptable for a test driver.Quoted 81 lines
Quoted 81 lines
drivers/fpga/tests/fpga-tests.c new file +75
-0@@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Test suite for the FPGA subsystem +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <kunit/test.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> + +#include "fake-fpga-region.h" +#include "fake-fpga-bridge.h" +#include "fake-fpga-mgr.h" + +#define FAKE_BIT_BLOCKS 16 +#define FAKE_BIT_SIZE (FPGA_TEST_BIT_BLOCK * FAKE_BIT_BLOCKS) + +static u8 fake_bit[FAKE_BIT_SIZE ]; + +static int init_sgt_bit (struct sg_table *sgt,void *bit,size_t len) +{ +int ret; + + ret =sg_alloc_table (sgt,1 ,GFP_KERNEL ); +if (ret) +return ret; + +sg_init_one (sgt->sgl, bit, len); + +return ret; +} + +static void free_sgt_bit (struct sg_table *sgt) +{ +if (sgt) +sg_free_table (sgt); +} + +static void fpga_build_base_sys (struct kunit *test,struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +int ret; + + ret =fake_fpga_mgr_register (mgr_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (bridge_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (region_ctx, mgr_ctx->mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (region_ctx, bridge_ctx->bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); +} + +static void fpga_free_base_sys (struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +if (region_ctx) +fake_fpga_region_unregister (region_ctx); + +if (bridge_ctx) +fake_fpga_bridge_unregister (bridge_ctx); + +if (region_ctx)Quoted 9 lines
drivers/fpga/tests/fpga-tests.c line 81
Quoted 6 lines
drivers/fpga/tests/fpga-tests.c new file +6
-0+fake_fpga_mgr_unregister (mgr_ctx); +} + +static int fpga_suite_init (struct kunit_suite *suite) +{ +fake_fpga_mgr_fill_header (fake_bit);Do we need to run it before every case? Or just run once for all cases?
Just once for all cases. So I'm calling it from the
suite_initfunction.For the next version, I'm thinking of allocating the image buffer using
kunit_kzalloc()instead of using a global static array.Quoted 46 lines
Quoted 46 lines
drivers/fpga/tests/fpga-tests.c new file +46
-0+ +return 0 ; +} + +static void fpga_base_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fpga_image_info *test_img_info; + +struct sg_table sgt_bit; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + test_img_info->buf = fake_bit; + test_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_img_info); +Quoted 9 lines
drivers/fpga/tests/fpga-tests.c line 133
Quoted 6 lines
drivers/fpga/tests/fpga-tests.c new file +6
-0+/* Allocate another fake test image using a scatter list */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + ret =init_sgt_bit (&sgt_bit, fake_bit,FAKE_BIT_SIZE ); +KUNIT_ASSERT_EQ (test, ret,0 );This is not fpga function, do we need the ASSERT?
Quoted 1 line
You're right. I'll change it to EXPECT.
Mm.. I think we may move the sgt initialization in .suite_init, and just return ERROR for failure. Does it help to quickly find out this is an ENV error, not a test case failure?
Thanks,
Yilun
Re: [RFC PATCH 1/4] fpga: add initial KUnit test suite
Quoted 289 lines · Xu Yilun
Quoted 120 lines · Marco Pagani
Quoted 6 lines · Xu Yilun
Quoted 2 lines · Marco Pagani
Introduce an initial KUnit suite to test the core components of the FPGA subsystem.
I'm not familiar with kunit, and I spend some time to read the
Documentation/dev-tools/kunit/, sorry for late response.Thank you for reviewing.
Quoted 89 lines
Quoted 89 lines
The test suite consists of two test cases. The first test case checks the programming of a static image on a fake FPGA with a single hardware bridge. The FPGA is first programmed using a test image stored in a buffer, and then with the same image linked to a single-entry scatter-gather list.
The second test case models dynamic partial reconfiguration. The FPGA is first configured with a static image that implements a reconfigurable design containing a sub-region controlled by two soft bridges. Then, the reconfigurable sub-region is reconfigured using a fake partial bitstream image. After the reconfiguration, the test checks that the soft bridges have been correctly activated.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fpga-tests.c | 264 ++++++++++++++++++++++++++++++++ 6 files changed, 295 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fpga-tests.cdrivers/fpga/Kconfig +2
-0@@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI FPGA manager driver support for Lattice FPGAs programming over slave SPI sysCONFIG interface. +source "drivers/fpga/tests/Kconfig" + endif # FPGAdrivers/fpga/Makefile +3
-0@@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o # Drivers for FPGAs which implement DFL obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o + +# KUnit tests +obj-$(CONFIG_FPGA_KUNIT_TESTS) += tests/drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=ydrivers/fpga/tests/Kconfig new file +15
-0@@ -0,0 +1,15 @@ +config FPGA_KUNIT_TESTS + tristate "FPGA KUnit tests" if !KUNIT_ALL_TESTS + depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT + default KUNIT_ALL_TESTS + help + Builds unit tests for the FPGA subsystem. This option + is not useful for distributions or general kernels, + but only for kernel developers working on the FPGA + subsystem and its associated drivers. + + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + + If in doubt, say "N".drivers/fpga/tests/Makefile new file +0
-0@@ -0,0 +1,6 @@Quoted 8 lines
drivers/fpga/tests/Makefile line 5
Quoted 5 lines
drivers/fpga/tests/Makefile new file +5
-0+# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-mgr.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-region.o +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fake-fpga-bridge.oIt is better the patches for fake components come first, otherwise may break the compilation. Also not friendly for review.
Sorry. I'll change the order in the next version.
Quoted 4 lines
drivers/fpga/tests/Makefile line 6
Quoted 2 lines
drivers/fpga/tests/Makefile new file +1
-0+obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-tests.oMaybe fpga-test.o?
I'll change the name in the next version.
Quoted 1 line
Quoted 7 lines
Quoted 3 lines
And could they be built in a single module? I haven't find a reason these fake components been used alone.
My feeling is that they could also come in handy to do some general development or testing on the subsystem. For instance, I used the fake FPGA manager in isolation to experiment with the OF region.
That's fine.
Quoted 158 lines
Initially, the fake manager also had an
of_device_iddevice matching struct. However, I later removed it because it was not used for the test setup, and I was not sure if adding an OF device matching struct was acceptable for a test driver.Quoted 81 lines
Quoted 81 lines
drivers/fpga/tests/fpga-tests.c new file +75
-0@@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Test suite for the FPGA subsystem +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <kunit/test.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> + +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> + +#include "fake-fpga-region.h" +#include "fake-fpga-bridge.h" +#include "fake-fpga-mgr.h" + +#define FAKE_BIT_BLOCKS 16 +#define FAKE_BIT_SIZE (FPGA_TEST_BIT_BLOCK * FAKE_BIT_BLOCKS) + +static u8 fake_bit[FAKE_BIT_SIZE ]; + +static int init_sgt_bit (struct sg_table *sgt,void *bit,size_t len) +{ +int ret; + + ret =sg_alloc_table (sgt,1 ,GFP_KERNEL ); +if (ret) +return ret; + +sg_init_one (sgt->sgl, bit, len); + +return ret; +} + +static void free_sgt_bit (struct sg_table *sgt) +{ +if (sgt) +sg_free_table (sgt); +} + +static void fpga_build_base_sys (struct kunit *test,struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +int ret; + + ret =fake_fpga_mgr_register (mgr_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_bridge_register (bridge_ctx, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_register (region_ctx, mgr_ctx->mgr, test); +KUNIT_ASSERT_EQ (test, ret,0 ); + + ret =fake_fpga_region_add_bridge (region_ctx, bridge_ctx->bridge); +KUNIT_ASSERT_EQ (test, ret,0 ); +} + +static void fpga_free_base_sys (struct fake_fpga_mgr *mgr_ctx, +struct fake_fpga_bridge *bridge_ctx, +struct fake_fpga_region *region_ctx) +{ +if (region_ctx) +fake_fpga_region_unregister (region_ctx); + +if (bridge_ctx) +fake_fpga_bridge_unregister (bridge_ctx); + +if (region_ctx)Quoted 9 lines
drivers/fpga/tests/fpga-tests.c line 81
Quoted 6 lines
drivers/fpga/tests/fpga-tests.c new file +6
-0+fake_fpga_mgr_unregister (mgr_ctx); +} + +static int fpga_suite_init (struct kunit_suite *suite) +{ +fake_fpga_mgr_fill_header (fake_bit);Do we need to run it before every case? Or just run once for all cases?
Just once for all cases. So I'm calling it from the
suite_initfunction.For the next version, I'm thinking of allocating the image buffer using
kunit_kzalloc()instead of using a global static array.Quoted 55 lines
Quoted 42 lines
drivers/fpga/tests/fpga-tests.c new file +42
-0+ +return 0 ; +} + +static void fpga_base_test (struct kunit *test) +{ +int ret; + +struct fake_fpga_mgr mgr_ctx; +struct fake_fpga_bridge base_bridge_ctx; +struct fake_fpga_region base_region_ctx; + +struct fpga_image_info *test_img_info; + +struct sg_table sgt_bit; + +fpga_build_base_sys (test, &mgr_ctx, &base_bridge_ctx, &base_region_ctx); + +/* Allocate a fake test image using a buffer */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + test_img_info->buf = fake_bit; + test_img_info->count =sizeof (fake_bit); + +kunit_info (test,"fake bitstream size: %zu\n" , test_img_info->count); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_state (&base_bridge_ctx)); +KUNIT_EXPECT_EQ (test,0 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +/* Program the fake FPGA using the image buffer */ + base_region_ctx.region->info = test_img_info; + ret =fpga_region_program_fpga (base_region_ctx.region); +KUNIT_ASSERT_EQ (test, ret,0 ); + +fake_fpga_mgr_check_write_buf (&mgr_ctx); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_mgr_get_rcfg_count (&mgr_ctx)); + +KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_state (&base_bridge_ctx));drivers/fpga/tests/fpga-tests.c line 133
Quoted 10 lines
drivers/fpga/tests/fpga-tests.c new file +10
-0+KUNIT_EXPECT_EQ (test,1 ,fake_fpga_bridge_get_cycles_count (&base_bridge_ctx)); + +fpga_image_info_free (test_img_info); + +/* Allocate another fake test image using a scatter list */ + test_img_info =fpga_image_info_alloc (&mgr_ctx.pdev->dev); +KUNIT_ASSERT_NOT_ERR_OR_NULL (test, test_img_info); + + ret =init_sgt_bit (&sgt_bit, fake_bit,FAKE_BIT_SIZE ); +KUNIT_ASSERT_EQ (test, ret,0 );This is not fpga function, do we need the ASSERT?
Quoted 5 lines
Quoted 1 line
You're right. I'll change it to EXPECT.
Mm.. I think we may move the sgt initialization in .suite_init, and just return ERROR for failure. Does it help to quickly find out this is an ENV error, not a test case failure?
I looked through the documentation for guidelines on how to handle initialization errors, but found only the eeprom example where KUNIT_ASSERT is used to handle errors in eeprom_buffer_test_init(). Existing test suites seem to use different approaches to handle initialization errors. Some return an error code, while others use KUnit assertions.
I'm more inclined to follow the example in the documentation and use KUnit assertions. Does this approach work for you?
After some thought, I'm restructuring the code to test single components in isolation before testing them together. In this way, I think the test suite will be more in line with the unit testing methodology.
Thanks,
Marco
Xu Yilun
maintainerRe: [RFC PATCH 1/4] fpga: add initial KUnit test suite
Quoted 12 lines
Quoted 11 lines
Quoted 7 lines
Quoted 5 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ ret = init_sgt_bit(&sgt_bit, fake_bit, FAKE_BIT_SIZE); + KUNIT_ASSERT_EQ(test, ret, 0);This is not fpga function, do we need the ASSERT?
You're right. I'll change it to EXPECT.
Mm.. I think we may move the sgt initialization in .suite_init, and just return ERROR for failure. Does it help to quickly find out this is an ENV error, not a test case failure?
Quoted 8 lines
I looked through the documentation for guidelines on how to handle initialization errors, but found only the eeprom example where
KUNIT_ASSERTis used to handle errors ineeprom_buffer_test_init(). Existing test suites seem to use different approaches to handle initialization errors. Some return an error code, while others use KUnit assertions.I'm more inclined to follow the example in the documentation and use KUnit assertions. Does this approach work for you?
It's good to me.
Quoted 10 lines
After some thought, I'm restructuring the code to test single components in isolation before testing them together. In this way, I think the test suite will be more in line with the unit testing methodology.
Thanks,
Marco
RFC PATCH 2/4 fpga: add fake FPGA region
In reply to Marco PaganiAdd fake FPGA region platform driver with support functions. This module is part of the KUnit test suite for the FPGA subsystem.
--- drivers/fpga/tests/fake-fpga-region.c | 186 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++++ 2 files changed, 223 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.h
drivers/fpga/tests/fake-fpga-region.c new file +186 -0
@@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA region +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> +#include <kunit/test.h> + +#include "fake-fpga-region.h" + +#define FAKE_FPGA_REGION_DEV_NAME "fake_fpga_region" + +struct fake_region_priv { +int id; +struct kunit *test; +}; + +struct fake_region_data { +struct fpga_manager *mgr; +struct kunit *test; +}; + +/** +* fake_fpga_region_register - register a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_register (struct fake_fpga_region *region_ctx, +struct fpga_manager *mgr,struct kunit *test) +{ +struct fake_region_data pdata; +struct fake_region_priv *priv; +int ret; + + pdata.mgr = mgr; + pdata.test = test; + + region_ctx->pdev =platform_device_alloc (FAKE_FPGA_REGION_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (region_ctx->pdev)) { +pr_err ("Fake FPGA region device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (region_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (region_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA region device add failed\n" ); +platform_device_put (region_ctx->pdev); +return ret; + } + + region_ctx->region =platform_get_drvdata (region_ctx->pdev); + +if (test) { + priv = region_ctx->region->priv; +kunit_info (test,"Fake FPGA region %d registered\n" , priv->id); + } + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_register); + +/** +* fake_fpga_region_unregister - unregister a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +*/ +void fake_fpga_region_unregister (struct fake_fpga_region *region_ctx) +{ +struct fake_region_priv *priv; +struct kunit *test; +int id; + + priv = region_ctx->region->priv; + test = priv->test; + id = priv->id; + +if (region_ctx->pdev) { +platform_device_unregister (region_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA region %d unregistered\n" , id); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_region_unregister); + +/** +* fake_fpga_region_add_bridge - add a bridge to a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @bridge: FPGA bridge. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_add_bridge (struct fake_fpga_region *region_ctx, +struct fpga_bridge *bridge) +{ +struct fake_region_priv *priv; +int ret; + + priv = region_ctx->region->priv; + + ret =fpga_bridge_get_to_list (bridge->dev.parent,NULL , + ®ion_ctx->region->bridge_list); + +if (priv->test && !ret) +kunit_info (priv->test,"Bridge added to fake FPGA region %d\n" , + priv->id); + +return ret; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_add_bridge); + +static int fake_fpga_region_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fpga_region *region; +struct fpga_manager *mgr; +struct fake_region_data *pdata; +struct fake_region_priv *priv; +static int id_count; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + + mgr =fpga_mgr_get (pdata->mgr->dev.parent); +if (IS_ERR (mgr)) +return PTR_ERR (mgr); + +/* +* No get_bridges() method since the bridges list is +* pre-built using fake_fpga_region_add_bridge() +*/ + region =fpga_region_register (dev, mgr,NULL ); +if (IS_ERR (region)) { +fpga_mgr_put (mgr); +return PTR_ERR (region); + } + + priv->test = pdata->test; + priv->id = id_count++; + region->priv = priv; + +platform_set_drvdata (pdev, region); + +return 0 ; +} + +static int fake_fpga_region_remove (struct platform_device *pdev) +{ +struct fpga_region *region =platform_get_drvdata (pdev); +struct fpga_manager *mgr = region->mgr; + +fpga_mgr_put (mgr); +fpga_bridges_put (®ion->bridge_list); +fpga_region_unregister (region); + +return 0 ; +} + +static struct platform_driver fake_fpga_region_drv = { + .driver = { + .name =FAKE_FPGA_REGION_DEV_NAME + }, + .probe = fake_fpga_region_probe, + .remove = fake_fpga_region_remove, +}; + +module_platform_driver (fake_fpga_region_drv); + +MODULE_AUTHOR ("Marco Pagani <[email protected]>" ); +MODULE_DESCRIPTION ("Fake FPGA Bridge" ); +MODULE_LICENSE ("GPL v2" );
drivers/fpga/tests/fake-fpga-region.h new file +37 -0
@@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Header file for fake FPGA region +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#ifndef __FPGA_FAKE_RGN_H +#define __FPGA_FAKE_RGN_H + +#include <linux/platform_device.h> +#include <kunit/test.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-bridge.h> + +/** +* struct fake_fpga_region - fake FPGA region context data structure +* +* @region: FPGA region. +* @pdev: platform device of the FPGA region. +*/ +struct fake_fpga_region { +struct fpga_region *region; +struct platform_device *pdev; +}; + +int fake_fpga_region_register (struct fake_fpga_region *region_ctx, +struct fpga_manager *mgr,struct kunit *test); + +int fake_fpga_region_add_bridge (struct fake_fpga_region *region_ctx, +struct fpga_bridge *bridge); + +void fake_fpga_region_unregister (struct fake_fpga_region *region_ctx); + +#endif /* __FPGA_FAKE_RGN_H */
Signature · 1 line
2.39.1
Xu Yilun
maintainerRe: [RFC PATCH 2/4] fpga: add fake FPGA region
Quoted 153 lines · Marco Pagani
Add fake FPGA region platform driver with support functions. This module is part of the KUnit test suite for the FPGA subsystem.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/tests/fake-fpga-region.c | 186 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++++ 2 files changed, 223 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.hdrivers/fpga/tests/fake-fpga-region.c new file +136
-0@@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA region +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> +#include <kunit/test.h> + +#include "fake-fpga-region.h" + +#define FAKE_FPGA_REGION_DEV_NAME "fake_fpga_region" + +struct fake_region_priv { +int id; +struct kunit *test; +}; + +struct fake_region_data { +struct fpga_manager *mgr; +struct kunit *test; +}; + +/** +* fake_fpga_region_register - register a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_register (struct fake_fpga_region *region_ctx, +struct fpga_manager *mgr,struct kunit *test) +{ +struct fake_region_data pdata; +struct fake_region_priv *priv; +int ret; + + pdata.mgr = mgr; + pdata.test = test; + + region_ctx->pdev =platform_device_alloc (FAKE_FPGA_REGION_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (region_ctx->pdev)) { +pr_err ("Fake FPGA region device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (region_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (region_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA region device add failed\n" ); +platform_device_put (region_ctx->pdev); +return ret; + } + + region_ctx->region =platform_get_drvdata (region_ctx->pdev); + +if (test) { + priv = region_ctx->region->priv; +kunit_info (test,"Fake FPGA region %d registered\n" , priv->id); + } + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_register); + +/** +* fake_fpga_region_unregister - unregister a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +*/ +void fake_fpga_region_unregister (struct fake_fpga_region *region_ctx) +{ +struct fake_region_priv *priv; +struct kunit *test; +int id; + + priv = region_ctx->region->priv; + test = priv->test; + id = priv->id; + +if (region_ctx->pdev) { +platform_device_unregister (region_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA region %d unregistered\n" , id); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_region_unregister); + +/** +* fake_fpga_region_add_bridge - add a bridge to a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @bridge: FPGA bridge. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_add_bridge (struct fake_fpga_region *region_ctx, +struct fpga_bridge *bridge) +{ +struct fake_region_priv *priv; +int ret; + + priv = region_ctx->region->priv; + + ret =fpga_bridge_get_to_list (bridge->dev.parent,NULL , + ®ion_ctx->region->bridge_list); + +if (priv->test && !ret) +kunit_info (priv->test,"Bridge added to fake FPGA region %d\n" , + priv->id); + +return ret; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_add_bridge); + +static int fake_fpga_region_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fpga_region *region; +struct fpga_manager *mgr; +struct fake_region_data *pdata; +struct fake_region_priv *priv; +static int id_count; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv)
drivers/fpga/tests/fake-fpga-region.c line 146
Quoted 10 lines
drivers/fpga/tests/fake-fpga-region.c new file +10
-0+return -ENOMEM ; + + mgr =fpga_mgr_get (pdata->mgr->dev.parent); +if (IS_ERR (mgr)) +return PTR_ERR (mgr); + +/* +* No get_bridges() method since the bridges list is +* pre-built using fake_fpga_region_add_bridge() +*/
This is not the common use for drivers to associate the region & bridge, Better to realize the get_bridges() method.
Thanks,
Yilun
Quoted 14 lines
drivers/fpga/tests/fake-fpga-region.c new file +14
-0+ region =fpga_region_register (dev, mgr,NULL ); +if (IS_ERR (region)) { +fpga_mgr_put (mgr); +return PTR_ERR (region); + } + + priv->test = pdata->test; + priv->id = id_count++; + region->priv = priv; + +platform_set_drvdata (pdev, region); + +return 0 ; +}
Re: [RFC PATCH 2/4] fpga: add fake FPGA region
Quoted 159 lines · Xu Yilun
Quoted 158 lines · Marco Pagani
Add fake FPGA region platform driver with support functions. This module is part of the KUnit test suite for the FPGA subsystem.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/tests/fake-fpga-region.c | 186 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++++ 2 files changed, 223 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.hdrivers/fpga/tests/fake-fpga-region.c new file +141
-0@@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA region +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> +#include <kunit/test.h> + +#include "fake-fpga-region.h" + +#define FAKE_FPGA_REGION_DEV_NAME "fake_fpga_region" + +struct fake_region_priv { +int id; +struct kunit *test; +}; + +struct fake_region_data { +struct fpga_manager *mgr; +struct kunit *test; +}; + +/** +* fake_fpga_region_register - register a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_register (struct fake_fpga_region *region_ctx, +struct fpga_manager *mgr,struct kunit *test) +{ +struct fake_region_data pdata; +struct fake_region_priv *priv; +int ret; + + pdata.mgr = mgr; + pdata.test = test; + + region_ctx->pdev =platform_device_alloc (FAKE_FPGA_REGION_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (region_ctx->pdev)) { +pr_err ("Fake FPGA region device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (region_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (region_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA region device add failed\n" ); +platform_device_put (region_ctx->pdev); +return ret; + } + + region_ctx->region =platform_get_drvdata (region_ctx->pdev); + +if (test) { + priv = region_ctx->region->priv; +kunit_info (test,"Fake FPGA region %d registered\n" , priv->id); + } + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_register); + +/** +* fake_fpga_region_unregister - unregister a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +*/ +void fake_fpga_region_unregister (struct fake_fpga_region *region_ctx) +{ +struct fake_region_priv *priv; +struct kunit *test; +int id; + + priv = region_ctx->region->priv; + test = priv->test; + id = priv->id; + +if (region_ctx->pdev) { +platform_device_unregister (region_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA region %d unregistered\n" , id); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_region_unregister); + +/** +* fake_fpga_region_add_bridge - add a bridge to a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @bridge: FPGA bridge. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_add_bridge (struct fake_fpga_region *region_ctx, +struct fpga_bridge *bridge) +{ +struct fake_region_priv *priv; +int ret; + + priv = region_ctx->region->priv; + + ret =fpga_bridge_get_to_list (bridge->dev.parent,NULL , + ®ion_ctx->region->bridge_list); + +if (priv->test && !ret) +kunit_info (priv->test,"Bridge added to fake FPGA region %d\n" , + priv->id); + +return ret; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_add_bridge); + +static int fake_fpga_region_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fpga_region *region; +struct fpga_manager *mgr; +struct fake_region_data *pdata; +struct fake_region_priv *priv; +static int id_count; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + + mgr =fpga_mgr_get (pdata->mgr->dev.parent); +if (IS_ERR (mgr)) +return PTR_ERR (mgr);
Quoted 8 lines
drivers/fpga/tests/fake-fpga-region.c line 146
Quoted 5 lines
drivers/fpga/tests/fake-fpga-region.c new file +5
-0+ +/* +* No get_bridges() method since the bridges list is +* pre-built using fake_fpga_region_add_bridge() +*/ This is not the common use for drivers to associate the region & bridge, Better to realize the
get_bridges()method.
Initially, I was using a get_bridges() method to create the list of bridges before each reconfiguration. However, this required having a "duplicated" list of bridges in the context of the fake region low-level driver.
Since I couldn't find a reason to keep a duplicate list of bridges in the fake region driver, I decided then to change the approach and build the list of bridges at device instantiation time.
In my understanding, the approach of creating the list of bridges just before reconfiguration with a get_bridges() method works best for the OF case, where the topology is already encoded in the DT. I feel using this approach on platforms without OF support would increase complexity and create unnecessary duplication.
Quoted 4 lines
Thanks,
Yilun
Quoted 15 lines
Quoted 4 lines
drivers/fpga/tests/fake-fpga-region.c new file +4
-0+ region =fpga_region_register (dev, mgr,NULL ); +if (IS_ERR (region)) { +fpga_mgr_put (mgr); +return PTR_ERR (region);drivers/fpga/tests/fake-fpga-region.c line 160
Quoted 10 lines
drivers/fpga/tests/fake-fpga-region.c new file +10
-0+ } + + priv->test = pdata->test; + priv->id = id_count++; + region->priv = priv; + +platform_set_drvdata (pdev, region); + +return 0 ; +}
Thanks,
Marco
Xu Yilun
maintainerRe: [RFC PATCH 2/4] fpga: add fake FPGA region
Quoted 179 lines · Marco Pagani
Quoted 159 lines · Xu Yilun
Quoted 158 lines · Marco Pagani
Add fake FPGA region platform driver with support functions. This module is part of the KUnit test suite for the FPGA subsystem.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/tests/fake-fpga-region.c | 186 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++++ 2 files changed, 223 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.hdrivers/fpga/tests/fake-fpga-region.c new file +141
-0@@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA region +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> +#include <kunit/test.h> + +#include "fake-fpga-region.h" + +#define FAKE_FPGA_REGION_DEV_NAME "fake_fpga_region" + +struct fake_region_priv { +int id; +struct kunit *test; +}; + +struct fake_region_data { +struct fpga_manager *mgr; +struct kunit *test; +}; + +/** +* fake_fpga_region_register - register a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_register (struct fake_fpga_region *region_ctx, +struct fpga_manager *mgr,struct kunit *test) +{ +struct fake_region_data pdata; +struct fake_region_priv *priv; +int ret; + + pdata.mgr = mgr; + pdata.test = test; + + region_ctx->pdev =platform_device_alloc (FAKE_FPGA_REGION_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (region_ctx->pdev)) { +pr_err ("Fake FPGA region device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (region_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (region_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA region device add failed\n" ); +platform_device_put (region_ctx->pdev); +return ret; + } + + region_ctx->region =platform_get_drvdata (region_ctx->pdev); + +if (test) { + priv = region_ctx->region->priv; +kunit_info (test,"Fake FPGA region %d registered\n" , priv->id); + } + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_register); + +/** +* fake_fpga_region_unregister - unregister a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +*/ +void fake_fpga_region_unregister (struct fake_fpga_region *region_ctx) +{ +struct fake_region_priv *priv; +struct kunit *test; +int id; + + priv = region_ctx->region->priv; + test = priv->test; + id = priv->id; + +if (region_ctx->pdev) { +platform_device_unregister (region_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA region %d unregistered\n" , id); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_region_unregister); + +/** +* fake_fpga_region_add_bridge - add a bridge to a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @bridge: FPGA bridge. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_add_bridge (struct fake_fpga_region *region_ctx, +struct fpga_bridge *bridge) +{ +struct fake_region_priv *priv; +int ret; + + priv = region_ctx->region->priv; + + ret =fpga_bridge_get_to_list (bridge->dev.parent,NULL , + ®ion_ctx->region->bridge_list); + +if (priv->test && !ret) +kunit_info (priv->test,"Bridge added to fake FPGA region %d\n" , + priv->id); + +return ret; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_add_bridge); + +static int fake_fpga_region_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fpga_region *region; +struct fpga_manager *mgr; +struct fake_region_data *pdata; +struct fake_region_priv *priv; +static int id_count; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + + mgr =fpga_mgr_get (pdata->mgr->dev.parent); +if (IS_ERR (mgr)) +return PTR_ERR (mgr);Quoted 8 lines
drivers/fpga/tests/fake-fpga-region.c line 146
Quoted 5 lines
drivers/fpga/tests/fake-fpga-region.c new file +5
-0+ +/* +* No get_bridges() method since the bridges list is +* pre-built using fake_fpga_region_add_bridge() +*/ This is not the common use for drivers to associate the region & bridge, Better to realize the
get_bridges()method.Initially, I was using a
get_bridges()method to create the list of bridges before each reconfiguration. However, this required having a "duplicated" list of bridges in the context of the fake region low-level driver.Since I couldn't find a reason to keep a duplicate list of bridges in the fake region driver, I decided then to change the approach and build the list of bridges at device instantiation time.
Quoted 5 lines
In my understanding, the approach of creating the list of bridges just before reconfiguration with a
get_bridges()method works best for the OF case, where the topology is already encoded in the DT. I feel using this approach on platforms without OF support would increase complexity and create unnecessary duplication.
I'm not fully get your point. My understanding is we don't have to always grab the bridge driver module if we don't reprogram. In many cases, we just work with the existing bitstream before Linux is started. So generally I prefer not to have an example that gets all bridges at initialization unless there is a real need.
Thanks,
Yilun
Re: [RFC PATCH 2/4] fpga: add fake FPGA region
Quoted 186 lines · Xu Yilun
Quoted 179 lines · Marco Pagani
Quoted 159 lines · Xu Yilun
Quoted 158 lines · Marco Pagani
Add fake FPGA region platform driver with support functions. This module is part of the KUnit test suite for the FPGA subsystem.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/tests/fake-fpga-region.c | 186 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++++ 2 files changed, 223 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.hdrivers/fpga/tests/fake-fpga-region.c new file +141
-0@@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA region +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> +#include <kunit/test.h> + +#include "fake-fpga-region.h" + +#define FAKE_FPGA_REGION_DEV_NAME "fake_fpga_region" + +struct fake_region_priv { +int id; +struct kunit *test; +}; + +struct fake_region_data { +struct fpga_manager *mgr; +struct kunit *test; +}; + +/** +* fake_fpga_region_register - register a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_register (struct fake_fpga_region *region_ctx, +struct fpga_manager *mgr,struct kunit *test) +{ +struct fake_region_data pdata; +struct fake_region_priv *priv; +int ret; + + pdata.mgr = mgr; + pdata.test = test; + + region_ctx->pdev =platform_device_alloc (FAKE_FPGA_REGION_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (region_ctx->pdev)) { +pr_err ("Fake FPGA region device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (region_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (region_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA region device add failed\n" ); +platform_device_put (region_ctx->pdev); +return ret; + } + + region_ctx->region =platform_get_drvdata (region_ctx->pdev); + +if (test) { + priv = region_ctx->region->priv; +kunit_info (test,"Fake FPGA region %d registered\n" , priv->id); + } + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_register); + +/** +* fake_fpga_region_unregister - unregister a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +*/ +void fake_fpga_region_unregister (struct fake_fpga_region *region_ctx) +{ +struct fake_region_priv *priv; +struct kunit *test; +int id; + + priv = region_ctx->region->priv; + test = priv->test; + id = priv->id; + +if (region_ctx->pdev) { +platform_device_unregister (region_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA region %d unregistered\n" , id); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_region_unregister); + +/** +* fake_fpga_region_add_bridge - add a bridge to a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @bridge: FPGA bridge. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_add_bridge (struct fake_fpga_region *region_ctx, +struct fpga_bridge *bridge) +{ +struct fake_region_priv *priv; +int ret; + + priv = region_ctx->region->priv; + + ret =fpga_bridge_get_to_list (bridge->dev.parent,NULL , + ®ion_ctx->region->bridge_list); + +if (priv->test && !ret) +kunit_info (priv->test,"Bridge added to fake FPGA region %d\n" , + priv->id); + +return ret; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_add_bridge); + +static int fake_fpga_region_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fpga_region *region; +struct fpga_manager *mgr; +struct fake_region_data *pdata; +struct fake_region_priv *priv; +static int id_count; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + + mgr =fpga_mgr_get (pdata->mgr->dev.parent); +if (IS_ERR (mgr)) +return PTR_ERR (mgr);Quoted 8 lines
drivers/fpga/tests/fake-fpga-region.c line 146
Quoted 5 lines
drivers/fpga/tests/fake-fpga-region.c new file +5
-0+ +/* +* No get_bridges() method since the bridges list is +* pre-built using fake_fpga_region_add_bridge() +*/ This is not the common use for drivers to associate the region & bridge, Better to realize the
get_bridges()method.Initially, I was using a
get_bridges()method to create the list of bridges before each reconfiguration. However, this required having a "duplicated" list of bridges in the context of the fake region low-level driver.Since I couldn't find a reason to keep a duplicate list of bridges in the fake region driver, I decided then to change the approach and build the list of bridges at device instantiation time.
Quoted 5 lines
In my understanding, the approach of creating the list of bridges just before reconfiguration with a
get_bridges()method works best for the OF case, where the topology is already encoded in the DT. I feel using this approach on platforms without OF support would increase complexity and create unnecessary duplication.
Quoted 5 lines
I'm not fully get your point. My understanding is we don't have to always grab the bridge driver module if we don't reprogram. In many cases, we just work with the existing bitstream before Linux is started. So generally I prefer not to have an example that gets all bridges at initialization unless there is a real need.
The fake region can be used without bridges to model the scenario where the FPGA is statically configured by the bootloader.
I was referring to the choice between building the bridge list of the region (fpga_region->bridge_list) ahead of programming vs. just before programming.
Currently, fake_fpga_region_add_bridge() attaches the bridge directly to the bridge_list of the fpga_region struct.
Alternatively, I could change fake_fpga_region_add_bridge() to attach the bridge to a secondary list in the low-level driver. The secondary list would then be copied to the fpga_region->bridge_list by a get_bridges() method just before programming.
However, I feel that using this approach would make test code more complicated than necessary. Ideally, I would like to keep fake modules as simple as possible.
Thanks,
Marco
Xu Yilun
maintainerRe: [RFC PATCH 2/4] fpga: add fake FPGA region
Quoted 202 lines · Marco Pagani
Quoted 186 lines · Xu Yilun
Quoted 179 lines · Marco Pagani
Quoted 159 lines · Xu Yilun
Quoted 158 lines · Marco Pagani
Add fake FPGA region platform driver with support functions. This module is part of the KUnit test suite for the FPGA subsystem.
Signed-off-by Marco Pagani <[email protected]>--- drivers/fpga/tests/fake-fpga-region.c | 186 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++++ 2 files changed, 223 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.hdrivers/fpga/tests/fake-fpga-region.c new file +141
-0@@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA region +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/fpga/fpga-bridge.h> +#include <kunit/test.h> + +#include "fake-fpga-region.h" + +#define FAKE_FPGA_REGION_DEV_NAME "fake_fpga_region" + +struct fake_region_priv { +int id; +struct kunit *test; +}; + +struct fake_region_data { +struct fpga_manager *mgr; +struct kunit *test; +}; + +/** +* fake_fpga_region_register - register a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_register (struct fake_fpga_region *region_ctx, +struct fpga_manager *mgr,struct kunit *test) +{ +struct fake_region_data pdata; +struct fake_region_priv *priv; +int ret; + + pdata.mgr = mgr; + pdata.test = test; + + region_ctx->pdev =platform_device_alloc (FAKE_FPGA_REGION_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (region_ctx->pdev)) { +pr_err ("Fake FPGA region device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (region_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (region_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA region device add failed\n" ); +platform_device_put (region_ctx->pdev); +return ret; + } + + region_ctx->region =platform_get_drvdata (region_ctx->pdev); + +if (test) { + priv = region_ctx->region->priv; +kunit_info (test,"Fake FPGA region %d registered\n" , priv->id); + } + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_register); + +/** +* fake_fpga_region_unregister - unregister a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +*/ +void fake_fpga_region_unregister (struct fake_fpga_region *region_ctx) +{ +struct fake_region_priv *priv; +struct kunit *test; +int id; + + priv = region_ctx->region->priv; + test = priv->test; + id = priv->id; + +if (region_ctx->pdev) { +platform_device_unregister (region_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA region %d unregistered\n" , id); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_region_unregister); + +/** +* fake_fpga_region_add_bridge - add a bridge to a fake FPGA region +* @region_ctx: fake FPGA region context data structure. +* @bridge: FPGA bridge. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_region_add_bridge (struct fake_fpga_region *region_ctx, +struct fpga_bridge *bridge) +{ +struct fake_region_priv *priv; +int ret; + + priv = region_ctx->region->priv; + + ret =fpga_bridge_get_to_list (bridge->dev.parent,NULL , + ®ion_ctx->region->bridge_list); + +if (priv->test && !ret) +kunit_info (priv->test,"Bridge added to fake FPGA region %d\n" , + priv->id); + +return ret; +} +EXPORT_SYMBOL_GPL (fake_fpga_region_add_bridge); + +static int fake_fpga_region_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fpga_region *region; +struct fpga_manager *mgr; +struct fake_region_data *pdata; +struct fake_region_priv *priv; +static int id_count; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + + mgr =fpga_mgr_get (pdata->mgr->dev.parent); +if (IS_ERR (mgr)) +return PTR_ERR (mgr);Quoted 8 lines
drivers/fpga/tests/fake-fpga-region.c line 146
Quoted 5 lines
drivers/fpga/tests/fake-fpga-region.c new file +5
-0+ +/* +* No get_bridges() method since the bridges list is +* pre-built using fake_fpga_region_add_bridge() +*/ This is not the common use for drivers to associate the region & bridge, Better to realize the
get_bridges()method.Initially, I was using a
get_bridges()method to create the list of bridges before each reconfiguration. However, this required having a "duplicated" list of bridges in the context of the fake region low-level driver.Since I couldn't find a reason to keep a duplicate list of bridges in the fake region driver, I decided then to change the approach and build the list of bridges at device instantiation time.
Quoted 5 lines
In my understanding, the approach of creating the list of bridges just before reconfiguration with a
get_bridges()method works best for the OF case, where the topology is already encoded in the DT. I feel using this approach on platforms without OF support would increase complexity and create unnecessary duplication.Quoted 5 lines
I'm not fully get your point. My understanding is we don't have to always grab the bridge driver module if we don't reprogram. In many cases, we just work with the existing bitstream before Linux is started. So generally I prefer not to have an example that gets all bridges at initialization unless there is a real need.
The fake region can be used without bridges to model the scenario where the FPGA is statically configured by the bootloader.
I was referring to the choice between building the bridge list of the region (
fpga_region->bridge_list) ahead of programming vs. just before programming.
Quoted 7 lines
Currently,
fake_fpga_region_add_bridge()attaches the bridge directly to thebridge_listof thefpga_regionstruct.Alternatively, I could change
fake_fpga_region_add_bridge()to attach the bridge to a secondary list in the low-level driver. The secondary list would then be copied to thefpga_region->bridge_listby aget_bridges()method just before programming.
I prefer to attach bridges just before programming in the test, as this is the logic for fpga region core and all fpga drivers now. It is better the first few tests covers the normal workflow.
Thanks,
Yilun
Quoted 9 lines
However, I feel that using this approach would make test code more complicated than necessary. Ideally, I would like to keep fake modules as simple as possible.
Thanks,
Marco
RFC PATCH 3/4 fpga: add fake FPGA manager
In reply to Marco PaganiAdd fake FPGA manager platform driver with support functions. The driver checks the programming sequence using KUnit expectations. This module is part of the KUnit test suite for the FPGA subsystem.
--- drivers/fpga/tests/fake-fpga-mgr.c | 365 +++++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-mgr.h | 42 ++++ 2 files changed, 407 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-mgr.c create mode 100644 drivers/fpga/tests/fake-fpga-mgr.h
drivers/fpga/tests/fake-fpga-mgr.c new file +365 -0
@@ -0,0 +1,365 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA manager +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-mgr.h> +#include <kunit/test.h> + +#include "fake-fpga-mgr.h" + +#define FAKE_FPGA_MGR_DEV_NAME "fake_fpga_mgr" + +#define FAKE_HEADER_BYTE 0x3f +#define FAKE_HEADER_SIZE FPGA_TEST_BIT_BLOCK + +struct fake_mgr_priv { +int rcfg_count; +bool op_parse_header; +bool op_write_init; +bool op_write; +bool op_write_sg; +bool op_write_complete; +struct kunit *test; +}; + +struct fake_mgr_data { +struct kunit *test; +}; + +static void check_header (struct kunit *test,const u8 *buf); + +static enum fpga_mgr_states op_state (struct fpga_manager *mgr) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) +kunit_info (priv->test,"Fake FPGA manager: state\n" ); + +return FPGA_MGR_STATE_UNKNOWN ; +} + +static u64 op_status (struct fpga_manager *mgr) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) +kunit_info (priv->test,"Fake FPGA manager: status\n" ); + +return 0 ; +} + +static int op_parse_header (struct fpga_manager *mgr,struct fpga_image_info *info, +const char *buf,size_t count) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) { +kunit_info (priv->test,"Fake FPGA manager: parse_header\n" ); + +KUNIT_EXPECT_EQ (priv->test, mgr->state, +FPGA_MGR_STATE_PARSE_HEADER ); + +check_header (priv->test, buf); + } + + priv->op_parse_header = true; + +return 0 ; +} + +static int op_write_init (struct fpga_manager *mgr,struct fpga_image_info *info, +const char *buf,size_t count) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) { +kunit_info (priv->test,"Fake FPGA manager: write_init\n" ); + +KUNIT_EXPECT_EQ (priv->test, mgr->state, +FPGA_MGR_STATE_WRITE_INIT ); + } + + priv->op_write_init = true; + +return 0 ; +} + +static int op_write (struct fpga_manager *mgr,const char *buf,size_t count) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) { +kunit_info (priv->test,"Fake FPGA manager: write\n" ); + +KUNIT_EXPECT_EQ (priv->test, mgr->state, +FPGA_MGR_STATE_WRITE ); + } + + priv->op_write = true; + +return 0 ; +} + +static int op_write_sg (struct fpga_manager *mgr,struct sg_table *sgt) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) { +kunit_info (priv->test,"Fake FPGA manager: write_sg\n" ); + +KUNIT_EXPECT_EQ (priv->test, mgr->state, +FPGA_MGR_STATE_WRITE ); + } + + priv->op_write_sg = true; + +return 0 ; +} + +static int op_write_complete (struct fpga_manager *mgr,struct fpga_image_info *info) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) { +kunit_info (priv->test,"Fake FPGA manager: write_complete\n" ); + +KUNIT_EXPECT_EQ (priv->test, mgr->state, +FPGA_MGR_STATE_WRITE_COMPLETE ); + } + + priv->op_write_complete = true; + priv->rcfg_count++; + +return 0 ; +} + +static void op_fpga_remove (struct fpga_manager *mgr) +{ +struct fake_mgr_priv *priv; + + priv = mgr->priv; + +if (priv->test) +kunit_info (priv->test,"Fake FPGA manager: remove\n" ); +} + +static const struct fpga_manager_ops fake_fpga_mgr_ops = { + .initial_header_size =FAKE_HEADER_SIZE , + .skip_header = false, + .state = op_state, + .status = op_status, + .parse_header = op_parse_header, + .write_init = op_write_init, + .write = op_write, + .write_sg = op_write_sg, + .write_complete = op_write_complete, + .fpga_remove = op_fpga_remove, +}; + +/** +* fake_fpga_mgr_register - register a fake FPGA manager +* @mgr_ctx: fake FPGA manager context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_mgr_register (struct fake_fpga_mgr *mgr_ctx,struct kunit *test) +{ +struct fake_mgr_data pdata; +int ret; + + pdata.test = test; + + mgr_ctx->pdev =platform_device_alloc (FAKE_FPGA_MGR_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (mgr_ctx->pdev)) { +pr_err ("Fake FPGA manager device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (mgr_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (mgr_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA manager device add failed\n" ); +platform_device_put (mgr_ctx->pdev); +return ret; + } + + mgr_ctx->mgr =platform_get_drvdata (mgr_ctx->pdev); + +if (test) +kunit_info (test,"Fake FPGA manager registered\n" ); + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_mgr_register); + +/** +* fake_fpga_mgr_unregister - unregister a fake FPGA manager +* @mgr_ctx: fake FPGA manager context data structure. +*/ +void fake_fpga_mgr_unregister (struct fake_fpga_mgr *mgr_ctx) +{ +struct fake_mgr_priv *priv; +struct kunit *test; + + priv = mgr_ctx->mgr->priv; + test = priv->test; + +if (mgr_ctx->pdev) { +platform_device_unregister (mgr_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA manager unregistered\n" ); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_mgr_unregister); + +/** +* fake_fpga_mgr_get_rcfg_count - get the number of reconfigurations +* @mgr_ctx: fake FPGA manager context data structure. +* +* Return: number of reconfigurations. +*/ +int fake_fpga_mgr_get_rcfg_count (const struct fake_fpga_mgr *mgr_ctx) +{ +struct fake_mgr_priv *priv; + + priv = mgr_ctx->mgr->priv; + +return priv->rcfg_count; +} +EXPORT_SYMBOL_GPL (fake_fpga_mgr_get_rcfg_count); + +/** +* fake_fpga_mgr_fill_header - fill the bitstream buffer with the test header +* @mgr_ctx: fake FPGA manager context data structure. +*/ +void fake_fpga_mgr_fill_header (u8 *buf) +{ +int i; + +for (i =0 ; i <FAKE_HEADER_SIZE ; i++) + buf[i] =FAKE_HEADER_BYTE ; +} +EXPORT_SYMBOL_GPL (fake_fpga_mgr_fill_header); + +static void check_header (struct kunit *test,const u8 *buf) +{ +int i; + +for (i =0 ; i <FAKE_HEADER_SIZE ; i++) +KUNIT_EXPECT_EQ (test, buf[i],FAKE_HEADER_BYTE ); +} + +static void clear_op_flags (struct fake_mgr_priv *priv) +{ + priv->op_parse_header = false; + priv->op_write_init = false; + priv->op_write = false; + priv->op_write_sg = false; + priv->op_write_complete = false; +} + +/** +* fake_fpga_mgr_check_write_buf - check if programming using a buffer succeeded +* @mgr_ctx: fake FPGA manager context data structure. +*/ +void fake_fpga_mgr_check_write_buf (struct fake_fpga_mgr *mgr_ctx) +{ +struct fake_mgr_priv *priv; + + priv = mgr_ctx->mgr->priv; + +if (priv->test) { +KUNIT_EXPECT_EQ (priv->test, priv->op_parse_header, true); +KUNIT_EXPECT_EQ (priv->test, priv->op_write_init, true); +KUNIT_EXPECT_EQ (priv->test, priv->op_write, true); +KUNIT_EXPECT_EQ (priv->test, priv->op_write_complete, true); + } + +clear_op_flags (priv); +} +EXPORT_SYMBOL_GPL (fake_fpga_mgr_check_write_buf); + +/** +* fake_fpga_mgr_check_write_sg - check if programming using a s.g. table succeeded +* @mgr_ctx: fake FPGA manager context data structure. +*/ +void fake_fpga_mgr_check_write_sg (struct fake_fpga_mgr *mgr_ctx) +{ +struct fake_mgr_priv *priv; + + priv = mgr_ctx->mgr->priv; + +if (priv->test) { +KUNIT_EXPECT_EQ (priv->test, priv->op_parse_header, true); +KUNIT_EXPECT_EQ (priv->test, priv->op_write_init, true); +KUNIT_EXPECT_EQ (priv->test, priv->op_write_sg, true); +KUNIT_EXPECT_EQ (priv->test, priv->op_write_complete, true); + } + +clear_op_flags (priv); +} +EXPORT_SYMBOL_GPL (fake_fpga_mgr_check_write_sg); + +static int fake_fpga_mgr_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fake_mgr_priv *priv; +struct fake_mgr_data *pdata; +struct fpga_manager *mgr; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + + priv->test = pdata->test; + + mgr =devm_fpga_mgr_register (dev,"Fake FPGA Manager" , + &fake_fpga_mgr_ops, priv); +if (IS_ERR (mgr)) +return PTR_ERR (mgr); + +platform_set_drvdata (pdev, mgr); + +return 0 ; +} + +static struct platform_driver fake_fpga_mgr_drv = { + .driver = { + .name =FAKE_FPGA_MGR_DEV_NAME + }, + .probe = fake_fpga_mgr_probe, +}; + +module_platform_driver (fake_fpga_mgr_drv); + +MODULE_AUTHOR ("Marco Pagani <[email protected]>" ); +MODULE_DESCRIPTION ("Fake FPGA Manager" ); +MODULE_LICENSE ("GPL v2" );
drivers/fpga/tests/fake-fpga-mgr.h new file +42 -0
42 lines not on this page · raw message
Signature · 1 line
2.39.1
RFC PATCH 4/4 fpga: add fake FPGA bridge
In reply to Marco PaganiAdd fake FPGA bridge driver with support functions. The driver includes a counter for the number of switching cycles. This module is part of the KUnit test suite for the FPGA subsystem.
--- drivers/fpga/tests/fake-fpga-bridge.c | 214 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-bridge.h | 36 +++++ 2 files changed, 250 insertions(+) create mode 100644 drivers/fpga/tests/fake-fpga-bridge.c create mode 100644 drivers/fpga/tests/fake-fpga-bridge.h
drivers/fpga/tests/fake-fpga-bridge.c new file +214 -0
@@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Driver for fake FPGA bridge +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#include <linux/types.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/fpga/fpga-bridge.h> +#include <kunit/test.h> + +#include "fake-fpga-bridge.h" + +#define FAKE_FPGA_BRIDGE_DEV_NAME "fake_fpga_bridge" + +struct fake_bridge_priv { +int id; +bool enable; +int cycles_count; +struct kunit *test; +}; + +struct fake_bridge_data { +struct kunit *test; +}; + +static int op_enable_show (struct fpga_bridge *bridge) +{ +struct fake_bridge_priv *priv; + + priv = bridge->priv; + +if (priv->test) +kunit_info (priv->test,"Fake FPGA bridge %d: enable_show\n" , + priv->id); + +return priv->enable; +} + +static int op_enable_set (struct fpga_bridge *bridge,bool enable) +{ +struct fake_bridge_priv *priv; + + priv = bridge->priv; + +if (enable && !priv->enable) + priv->cycles_count++; + + priv->enable = enable; + +if (priv->test) +kunit_info (priv->test,"Fake FPGA bridge %d: enable_set: %d\n" , + priv->id, enable); + +return 0 ; +} + +static void op_remove (struct fpga_bridge *bridge) +{ +} + +static const struct fpga_bridge_ops fake_fpga_bridge_ops = { + .enable_show = op_enable_show, + .enable_set = op_enable_set, + .fpga_bridge_remove = op_remove, +}; + +/** +* fake_fpga_bridge_register - register a fake FPGA bridge +* @bridge_ctx: fake FPGA bridge context data structure. +* @test: KUnit test context object. +* +* Return: 0 if registration succeeded, an error code otherwise. +*/ +int fake_fpga_bridge_register (struct fake_fpga_bridge *bridge_ctx, +struct kunit *test) +{ +struct fake_bridge_data pdata; +struct fake_bridge_priv *priv; +int ret; + + pdata.test = test; + + bridge_ctx->pdev =platform_device_alloc (FAKE_FPGA_BRIDGE_DEV_NAME , +PLATFORM_DEVID_AUTO ); +if (IS_ERR (bridge_ctx->pdev)) { +pr_err ("Fake FPGA bridge device allocation failed\n" ); +return -ENOMEM ; + } + +platform_device_add_data (bridge_ctx->pdev, &pdata,sizeof (pdata)); + + ret =platform_device_add (bridge_ctx->pdev); +if (ret) { +pr_err ("Fake FPGA bridge device add failed\n" ); +platform_device_put (bridge_ctx->pdev); +return ret; + } + + bridge_ctx->bridge =platform_get_drvdata (bridge_ctx->pdev); + +if (test) { + priv = bridge_ctx->bridge->priv; +kunit_info (test,"Fake FPGA bridge %d registered\n" , priv->id); + } + +return 0 ; +} +EXPORT_SYMBOL_GPL (fake_fpga_bridge_register); + +/** +* fake_fpga_bridge_unregister - unregister a fake FPGA bridge +* @bridge_ctx: fake FPGA bridge context data structure. +*/ +void fake_fpga_bridge_unregister (struct fake_fpga_bridge *bridge_ctx) +{ +struct fake_bridge_priv *priv; +struct kunit *test; +int id; + + priv = bridge_ctx->bridge->priv; + test = priv->test; + id = priv->id; + +if (bridge_ctx->pdev) { +platform_device_unregister (bridge_ctx->pdev); +if (test) +kunit_info (test,"Fake FPGA bridge %d unregistered\n" , id); + } +} +EXPORT_SYMBOL_GPL (fake_fpga_bridge_unregister); + +/** +* fake_fpga_bridge_get_state - get state of a fake FPGA bridge +* @bridge_ctx: fake FPGA bridge context data structure. +* +* Return: 1 if the bridge is enabled, 0 if disabled. +*/ +int fake_fpga_bridge_get_state (const struct fake_fpga_bridge *bridge_ctx) +{ +return bridge_ctx->bridge->br_ops->enable_show (bridge_ctx->bridge); +} +EXPORT_SYMBOL_GPL (fake_fpga_bridge_get_state); + +/** +* fake_fpga_bridge_get_cycles_count - get the number of switching cycles +* @bridge_ctx: fake FPGA bridge context data structure. +* +* Return: number of switching cycles. +*/ +int fake_fpga_bridge_get_cycles_count (const struct fake_fpga_bridge *bridge_ctx) +{ +struct fake_bridge_priv *priv; + + priv = bridge_ctx->bridge->priv; + +return priv->cycles_count; +} +EXPORT_SYMBOL_GPL (fake_fpga_bridge_get_cycles_count); + +static int fake_fpga_bridge_probe (struct platform_device *pdev) +{ +struct device *dev; +struct fpga_bridge *bridge; +struct fake_bridge_data *pdata; +struct fake_bridge_priv *priv; +static int id_count; + + dev = &pdev->dev; + pdata =dev_get_platdata (dev); + + priv =devm_kzalloc (dev,sizeof (*priv),GFP_KERNEL ); +if (!priv) +return -ENOMEM ; + + priv->id = id_count++; + priv->test = pdata->test; + + bridge =fpga_bridge_register (dev,"Fake FPGA Bridge" , + &fake_fpga_bridge_ops, priv); +if (IS_ERR (bridge)) +return PTR_ERR (bridge); + +platform_set_drvdata (pdev, bridge); + +return 0 ; +} + +static int fake_fpga_bridge_remove (struct platform_device *pdev) +{ +struct fpga_bridge *bridge =platform_get_drvdata (pdev); + +fpga_bridge_unregister (bridge); + +return 0 ; +} + +static struct platform_driver fake_fpga_bridge_drv = { + .driver = { + .name =FAKE_FPGA_BRIDGE_DEV_NAME + }, + .probe = fake_fpga_bridge_probe, + .remove = fake_fpga_bridge_remove, +}; + +module_platform_driver (fake_fpga_bridge_drv); + +MODULE_AUTHOR ("Marco Pagani <[email protected]>" ); +MODULE_DESCRIPTION ("Fake FPGA Bridge" ); +MODULE_LICENSE ("GPL v2" );
drivers/fpga/tests/fake-fpga-bridge.h new file +36 -0
@@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Header file for fake FPGA bridge +* +* Copyright (C) 2023 Red Hat, Inc. All rights reserved. +* +* Author: Marco Pagani <[email protected]> +*/ + +#ifndef __FPGA_FAKE_BRIDGE_H +#define __FPGA_FAKE_BRIDGE_H + +#include <linux/platform_device.h> +#include <kunit/test.h> + +/** +* struct fake_fpga_bridge - fake FPGA bridge context data structure +* +* @bridge: FPGA bridge. +* @pdev: platform device of the FPGA bridge. +*/ +struct fake_fpga_bridge { +struct fpga_bridge *bridge; +struct platform_device *pdev; +}; + +int fake_fpga_bridge_register (struct fake_fpga_bridge *bridge_ctx, +struct kunit *test); + +void fake_fpga_bridge_unregister (struct fake_fpga_bridge *bridge_ctx); + +int fake_fpga_bridge_get_state (const struct fake_fpga_bridge *bridge_ctx); + +int fake_fpga_bridge_get_cycles_count (const struct fake_fpga_bridge *bridge_ctx); + +#endif /* __FPGA_FAKE_BRIDGE_H */
Signature · 1 line
2.39.1
Quoted 9 lines · Marco Pagani
This patch set introduces a KUnit suite to test the core components of the FPGA subsystem. More specifically, the suite tests the core functions of the FPGA manager, FPGA bridge, and FPGA region.
These components are tested using "fake" modules that allow observing their internals without altering the source code.
The test suite can be run using
[user@localhost linux]$./tools/testing/kunit/kunit.pyrun --kunitconfig=drivers/fpga/tests
When I tried running these tests, I got an error until I created this file:
drivers/fpga/tests/.kunitconfig:CONFIG_KUNIT=yCONFIG_FPGA=yCONFIG_FPGA_REGION=yCONFIG_FPGA_BRIDGE=yCONFIG_FPGA_KUNIT_TESTS=y
I think this file needs to be included in your patchset?
- Russ
Quoted 31 lines
Marco Pagani (4):
fpga: add initial KUnit test suite
fpga: add fake FPGA region
fpga: add fake FPGA manager
fpga: add fake FPGA bridgedrivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fake-fpga-bridge.c | 214 +++++++++++++++ drivers/fpga/tests/fake-fpga-bridge.h | 36 +++ drivers/fpga/tests/fake-fpga-mgr.c | 365 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-mgr.h | 42 +++ drivers/fpga/tests/fake-fpga-region.c | 186 +++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++ drivers/fpga/tests/fpga-tests.c | 264 +++++++++++++++++++ 12 files changed, 1175 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile create mode 100644 drivers/fpga/tests/fake-fpga-bridge.c create mode 100644 drivers/fpga/tests/fake-fpga-bridge.h create mode 100644 drivers/fpga/tests/fake-fpga-mgr.c create mode 100644 drivers/fpga/tests/fake-fpga-mgr.h create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.h create mode 100644 drivers/fpga/tests/fpga-tests.c
Quoted 21 lines · Russ Weight
Quoted 9 lines · Marco Pagani
This patch set introduces a KUnit suite to test the core components of the FPGA subsystem. More specifically, the suite tests the core functions of the FPGA manager, FPGA bridge, and FPGA region.
These components are tested using "fake" modules that allow observing their internals without altering the source code.
The test suite can be run using
[user@localhost linux]$./tools/testing/kunit/kunit.pyrun --kunitconfig=drivers/fpga/testsWhen I tried running these tests, I got an error until I created this file:
drivers/fpga/tests/.kunitconfig:CONFIG_KUNIT=yCONFIG_FPGA=yCONFIG_FPGA_REGION=yCONFIG_FPGA_BRIDGE=yCONFIG_FPGA_KUNIT_TESTS=y
Quoted 4 lines
I think this file needs to be included in your patchset?
- Russ
Patch 1/4 includes a .kunitconfig file with these configs set =y
drivers/fpga/tests/.kunitconfig line 5
Quoted 11 lines
drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=y
To double-check for any patch format errors, I downloaded the patch set from lore.kernel.org and applied it on a fresh tree with Git (version 2.39.1) using git am. In my case, Git created the .kunitconfig file and I was able to run the tests.
Quoted 23 lines
Quoted 23 lines
Marco Pagani (4):
fpga: add initial KUnit test suite
fpga: add fake FPGA region
fpga: add fake FPGA manager
fpga: add fake FPGA bridgedrivers/fpga/Kconfig | 2 + drivers/fpga/Makefile | 3 + drivers/fpga/tests/.kunitconfig | 5 + drivers/fpga/tests/Kconfig | 15 ++ drivers/fpga/tests/Makefile | 6 + drivers/fpga/tests/fake-fpga-bridge.c | 214 +++++++++++++++ drivers/fpga/tests/fake-fpga-bridge.h | 36 +++ drivers/fpga/tests/fake-fpga-mgr.c | 365 ++++++++++++++++++++++++++ drivers/fpga/tests/fake-fpga-mgr.h | 42 +++ drivers/fpga/tests/fake-fpga-region.c | 186 +++++++++++++ drivers/fpga/tests/fake-fpga-region.h | 37 +++ drivers/fpga/tests/fpga-tests.c | 264 +++++++++++++++++++ 12 files changed, 1175 insertions(+) create mode 100644 drivers/fpga/tests/.kunitconfig create mode 100644 drivers/fpga/tests/Kconfig create mode 100644 drivers/fpga/tests/Makefile
Quoted 9 lines
Quoted 8 lines
create mode 100644 drivers/fpga/tests/fake-fpga-bridge.c create mode 100644 drivers/fpga/tests/fake-fpga-bridge.h create mode 100644 drivers/fpga/tests/fake-fpga-mgr.c create mode 100644 drivers/fpga/tests/fake-fpga-mgr.h create mode 100644 drivers/fpga/tests/fake-fpga-region.c create mode 100644 drivers/fpga/tests/fake-fpga-region.h create mode 100644 drivers/fpga/tests/fpga-tests.c
Thanks,
Marco
Quoted 15 lines · Marco Pagani
Quoted 9 lines
When I tried running these tests, I got an error until I created this file:
drivers/fpga/tests/.kunitconfig:CONFIG_KUNIT=yCONFIG_FPGA=yCONFIG_FPGA_REGION=yCONFIG_FPGA_BRIDGE=yCONFIG_FPGA_KUNIT_TESTS=yQuoted 4 lines
I think this file needs to be included in your patchset?
- Russ
Patch 1/4 includes a .kunitconfig file with these configs set =y
Quoted 17 lines
drivers/fpga/tests/.kunitconfig line 5
Quoted 11 lines
drivers/fpga/tests/.kunitconfig new file +5
-0@@ -0,0 +1,5 @@ +CONFIG_KUNIT=y +CONFIG_FPGA=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y +CONFIG_FPGA_KUNIT_TESTS=yTo double-check for any patch format errors, I downloaded the patch set from lore.kernel.org and applied it on a fresh tree with Git (version 2.39.1) using git am. In my case, Git created the .kunitconfig file and I was able to run the tests.
I can see the .kunitconfig file in the emailed patch. I had to resolve some conflicts when I applied patch #1 - I must have missed this file when I committed the changes.
Thanks,
- Russ