Skip to contentSkip to conversation

RISC-V IPI Improvements

PATCH Superseded Anup Patel 1 participant 8 messages Mar 7, 2023

Subsystems (4)

v17 of 18 Superseded Latest is v18 →

lore
Share & tools
lore

Anup Patel

author
#0 lore raw

v17 cover RISC-V IPI Improvements

This series aims to improve IPI support in Linux RISC-V in following ways:
1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V specific hooks. This also makes Linux RISC-V IPI support aligned with other architectures.
2) Remote TLB flushes and icache flushes should prefer local IPIs instead of SBI calls whenever we have specialized hardware (such as RISC-V AIA IMSIC and RISC-V SWI) which allows S-mode software to directly inject IPIs without any assistance from M-mode runtime firmware.

These patches were originally part of the "Linux RISC-V ACLINT Support" series but this now a separate series so that it can be merged independently of the "Linux RISC-V ACLINT Support" series.
(Refer, https://lore.kernel.org/lkml/[email protected]/)

These patches are also a preparatory patches for the up-coming:
1) Linux RISC-V AIA support
2) Linux RISC-V SWI support

These patches can also be found in riscv_ipi_imp_v17 branch at:
https://github.com/avpatel/linux.git

Changes since v16:
- Rebased on Linux-6.3-rc1
- Dropped PATCH3 and PATCH9 since these patches are already merged
- Added Palmer's Acked-by

Changes since v15:
- Rebased on Linux-6.2-rc2
- Added Reviewed-by and Tested-by tags to some of the patches.

Changes since v14:
- Minor fixes in commit description of PATCH3 (as suggested by tglx)
- Don't disable parent IPI when CPU goes offline for SBI IPI driver and CLINT driver in PATCH4.
- Include Apple AIC driver changes from Marc Z as PATCH9

Changes since v13:
- Included changes suggested by Marc Z in PATCH3
- Use chained handlers in PATCH4
- Added new PATCH8 to have empty irq_eoi() in RISC-V INTC driver. This avoids the unnecessary mask/unmask dance at time of handling interrupts.

Changes since v12:
- Rebased on Linux-6.1-rc7
- Bring-back the IPI optimization in ipi_mux_send_mask() for PATCH3
- Call ipi_mux_send() for one target CPU at a time in PATCH3

Changes since v11:
- Removed ipi_mux_pre/post_handle() callbacks in PATCH3
- Removed sturct ipi_mux_ops in PATCH3
- Removed parent_virq and data pointer from everywhere in PATCH3
- Removed struct ipi_mux_control in PATCH3
- Improved function signature of ipi_mux_send() callback in PATCH3
- Used unsigned type with atomic operation in PATCH3

Changes since v10:
- Rebased on Linux-6.1-rc5
- Drop the "!(pending & ibit)" check in ipi_mux_send_mask() of PATCH3
- Disable local interrupts in ipi_mux_send_mask() of PATCH3 because we can be preempted while using a per-CPU temporary variable.

Changes since v9:
- Rebased on Linux-6.1-rc3
- Updated header comment block of ipi-mux.c in PATCH3
- Use a struct for global data of ipi-mux.c in PATCH3
- Add per-CPU temp cpumask for sending IPIs in PATCH3
- Drop the use of fwspec in PATCH3
- Use static key for ipi_mux_pre_handle() and ipi_mux_post_handle() in PATCH3
- Remove redundant pr_warn_ratelimited() called by ipi_mux_process() in PATCH3
- Remove CPUHP thingy from ipi_mux_create() in PATCH3

Changes since v8:
- Rebased on Linux-6.0-rc3
- Use dummy percpu data as parameter for request_percpu_irq() in PATCH4.

Changes since v7:
- Rebased on Linux-6.0-rc1
- Use atomic operations to track per-CPU pending and enabled IPIs in PATCH3. (Note: this is inspired from IPI muxing implemented in drivers/irqchip/irq-apple-aic.c)
- Made "struct ipi_mux_ops" (added by PATCH3) flexible so that drivers/irqchip/irq-apple-aic.c can adopt it in future.

Changes since v6:
- Rebased on Linux-5.19-rc7
- Added documentation for struct ipi_mux_ops in PATCH3
- Dropped dummy irq_mask()/unmask() in PATCH3
- Added const for "ipi_mux_chip" in PATCH3
- Removed "type" initialization from ipi_mux_domain_alloc() in PATCH3
- Dropped translate() from "ipi_mux_domain_ops" in PATCH3
- Improved barrier documentation in ipi_mux_process() of PATCH3
- Added percpu check in ipi_mux_create() for parent_virq of PATCH3
- Added nr_ipi parameter in ipi_mux_create() of PATCH3

Changes since v5:
- Rebased on Linux-5.18-rc3
- Used kernel doc style in PATCH3
- Removed redundant loop in ipi_mux_process() of PATCH3
- Removed "RISC-V" prefix form ipi_mux_chip.name of PATCH3
- Removed use of "this patch" in PATCH3 commit description
- Addressed few other nit comments in PATCH3

Changes since v4:
- Rebased on Linux-5.17
- Includes new PATCH3 which adds mechanism to multiplex a single HW IPI

Changes since v3:
- Rebased on Linux-5.17-rc6
- Updated PATCH2 to not export riscv_set_intc_hwnode_fn()
- Simplified riscv_intc_hwnode() in PATCH2

Changes since v2:
- Rebased on Linux-5.17-rc4
- Updated PATCH2 to not create synthetic INTC fwnode and instead provide a function which allows drivers to directly discover INTC fwnode

Changes since v1:
- Use synthetic fwnode for INTC instead of irq_set_default_host() in PATCH2

Anup Patel (7):
RISC-V: Clear SIP bit only when using SBI IPI operations irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Treat IPIs as normal Linux IRQs
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Use IPIs for remote icache flush when possible irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers

 arch/riscv/Kconfig                |   2 +
 arch/riscv/include/asm/irq.h      |   4 +
 arch/riscv/include/asm/sbi.h      |   9 +-
 arch/riscv/include/asm/smp.h      |  49 ++++++---
 arch/riscv/kernel/Makefile        |   1 +
 arch/riscv/kernel/cpu-hotplug.c   |   3 +-
 arch/riscv/kernel/irq.c           |  21 +++-
 arch/riscv/kernel/sbi-ipi.c       |  77 ++++++++++++++
 arch/riscv/kernel/sbi.c           | 100 +++--------------
 arch/riscv/kernel/smp.c           | 171 +++++++++++++++---------------
 arch/riscv/kernel/smpboot.c       |   5 +-
 arch/riscv/mm/cacheflush.c        |   5 +-
 arch/riscv/mm/tlbflush.c          |  93 +++++++++++++---
 drivers/clocksource/timer-clint.c |  65 +++++++++---
 drivers/irqchip/Kconfig           |   1 +
 drivers/irqchip/irq-riscv-intc.c  |  71 ++++++++-----
 16 files changed, 429 insertions(+), 248 deletions(-)
 create mode 100644 arch/riscv/kernel/sbi-ipi.c
Signature · 1 line
2.34.1
author
#1 lore raw

PATCH v17 1/7 RISC-V: Clear SIP bit only when using SBI IPI operations

The software interrupt pending (i.e. [M|S]SIP) bit is writeable for S-mode but read-only for M-mode so we clear this bit only when using SBI IPI operations.

---
 arch/riscv/kernel/sbi.c | 8 +++++++-
 arch/riscv/kernel/smp.c | 2 --
 2 files changed, 7 insertions(+), 3 deletions(-)
arch/riscv/kernel/sbi.c +7 -1
index 5c87db8fdff2..ac99a70ead6a 100644
@@ -646,8 +646,14 @@ static void sbi_send_cpumask_ipi(const struct cpumask *target)
 	sbi_send_ipi(target);
 }
 
+static void sbi_ipi_clear(void)
+{
+	csr_clear(CSR_IP, IE_SIE);
+}
+
 static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi
+	.ipi_inject = sbi_send_cpumask_ipi,
+	.ipi_clear = sbi_ipi_clear
 };
 
 void __init sbi_init(void)
arch/riscv/kernel/smp.c +0 -2
index 8c3b59f1f9b8..8a12768c09ee 100644
@@ -112,8 +112,6 @@ void riscv_clear_ipi(void)
 {
 	if (ipi_ops && ipi_ops->ipi_clear)
 		ipi_ops->ipi_clear();
-
-	csr_clear(CSR_IP, IE_SIE);
 }
 EXPORT_SYMBOL_GPL(riscv_clear_ipi);
 
Signature · 1 line
2.34.1
author
#2 lore raw

PATCH v17 2/7 irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode

In reply to Anup Patel

Various RISC-V drivers (such as SBI IPI, SBI Timer, SBI PMU, and KVM RISC-V) don't have associated DT node but these drivers need standard per-CPU (local) interrupts defined by the RISC-V privileged specification.

We add riscv_get_intc_hwnode() in arch/riscv which allows RISC-V drivers not having DT node to discover INTC hwnode which in-turn helps these drivers to map per-CPU (local) interrupts provided by the INTC driver.

---
 arch/riscv/include/asm/irq.h     |  4 ++++
 arch/riscv/kernel/irq.c          | 18 ++++++++++++++++++
 drivers/irqchip/irq-riscv-intc.c |  7 +++++++
 3 files changed, 29 insertions(+)
arch/riscv/include/asm/irq.h +4 -0
index e4c435509983..43b9ebfbd943 100644
@@ -12,6 +12,10 @@
 
 #include <asm-generic/irq.h>
 
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void));
+
+struct fwnode_handle *riscv_get_intc_hwnode(void);
+
 extern void __init init_IRQ(void);
 
 #endif /* _ASM_RISCV_IRQ_H */
arch/riscv/kernel/irq.c +18 -0
index 7207fa08d78f..96d3171f0ca1 100644
@@ -7,9 +7,27 @@
 
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
 #include <linux/seq_file.h>
 #include <asm/smp.h>
 
+static struct fwnode_handle *(*__get_intc_node)(void);
+
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void))
+{
+	__get_intc_node = fn;
+}
+
+struct fwnode_handle *riscv_get_intc_hwnode(void)
+{
+	if (__get_intc_node)
+		return __get_intc_node();
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(riscv_get_intc_hwnode);
+
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
 	show_ipi_stats(p, prec);
drivers/irqchip/irq-riscv-intc.c +7 -0
index 499e5f81b3fe..9066467e99e4 100644
@@ -92,6 +92,11 @@ static const struct irq_domain_ops riscv_intc_domain_ops = {
 	.xlate	= irq_domain_xlate_onecell,
 };
 
+static struct fwnode_handle *riscv_intc_hwnode(void)
+{
+	return intc_domain->fwnode;
+}
+
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
@@ -126,6 +131,8 @@ static int __init riscv_intc_init(struct device_node *node,
 		return rc;
 	}
 
+	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
+
 	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
 			  "irqchip/riscv/intc:starting",
 			  riscv_intc_cpu_starting,
Signature · 1 line
2.34.1
author
#3 lore raw

PATCH v17 3/7 RISC-V: Treat IPIs as normal Linux IRQs

In reply to Anup Patel

Currently, the RISC-V kernel provides arch specific hooks (i.e. struct riscv_ipi_ops) to register IPI handling methods. The stats gathering of IPIs is also arch specific in the RISC-V kernel.

Other architectures (such as ARM, ARM64, and MIPS) have moved away from custom arch specific IPI handling methods. Currently, these architectures have Linux irqchip drivers providing a range of Linux IRQ numbers to be used as IPIs and IPI triggering is done using generic IPI APIs. This approach allows architectures to treat IPIs as normal Linux IRQs and IPI stats gathering is done by the generic Linux IRQ subsystem.

We extend the RISC-V IPI handling as-per above approach so that arch specific IPI handling methods (struct riscv_ipi_ops) can be removed and the IPI handling is done through the Linux IRQ subsystem.

---
 arch/riscv/Kconfig                |   2 +
 arch/riscv/include/asm/sbi.h      |   9 +-
 arch/riscv/include/asm/smp.h      |  35 ++++---
 arch/riscv/kernel/Makefile        |   1 +
 arch/riscv/kernel/cpu-hotplug.c   |   3 +-
 arch/riscv/kernel/irq.c           |   3 +-
 arch/riscv/kernel/sbi-ipi.c       |  77 ++++++++++++++
 arch/riscv/kernel/sbi.c           | 106 +++-----------------
 arch/riscv/kernel/smp.c           | 160 +++++++++++++++---------------
 arch/riscv/kernel/smpboot.c       |   5 +-
 drivers/clocksource/timer-clint.c |  65 +++++++++---
 drivers/irqchip/Kconfig           |   1 +
 drivers/irqchip/irq-riscv-intc.c  |  55 +++++-----
 13 files changed, 283 insertions(+), 239 deletions(-)
 create mode 100644 arch/riscv/kernel/sbi-ipi.c
arch/riscv/Kconfig +2 -0
index c5e42cc37604..71754eb32ee6 100644
@@ -63,6 +63,8 @@ config RISCV
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP if MMU
+	select GENERIC_IRQ_IPI if SMP
+	select GENERIC_IRQ_IPI_MUX if SMP
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
arch/riscv/include/asm/sbi.h +7 -2
index 945b7be249c1..acab4410ef2a 100644
@@ -271,8 +271,7 @@ long sbi_get_marchid(void);
 long sbi_get_mimpid(void);
 void sbi_set_timer(uint64_t stime_value);
 void sbi_shutdown(void);
-void sbi_clear_ipi(void);
-int sbi_send_ipi(const struct cpumask *cpu_mask);
+void sbi_send_ipi(unsigned int cpu);
 int sbi_remote_fence_i(const struct cpumask *cpu_mask);
 int sbi_remote_sfence_vma(const struct cpumask *cpu_mask,
 			   unsigned long start,
@@ -335,4 +334,10 @@ unsigned long riscv_cached_mvendorid(unsigned int cpu_id);
 unsigned long riscv_cached_marchid(unsigned int cpu_id);
 unsigned long riscv_cached_mimpid(unsigned int cpu_id);
 
+#if IS_ENABLED(CONFIG_SMP) && IS_ENABLED(CONFIG_RISCV_SBI)
+void sbi_ipi_init(void);
+#else
+static inline void sbi_ipi_init(void) { }
+#endif
+
 #endif /* _ASM_RISCV_SBI_H */
arch/riscv/include/asm/smp.h +21 -14
index 3831b638ecab..4fe7a8854c2e 100644
@@ -15,11 +15,6 @@
 struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
-struct riscv_ipi_ops {
-	void (*ipi_inject)(const struct cpumask *target);
-	void (*ipi_clear)(void);
-};
-
 #ifdef CONFIG_SMP
 /*
  * Mapping between linux logical cpu index and hartid.
@@ -33,9 +28,6 @@ void show_ipi_stats(struct seq_file *p, int prec);
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
-/* Called from C code, this handles an IPI. */
-void handle_IPI(struct pt_regs *regs);
-
 /* Hook for the generic smp_call_function_many() routine. */
 void arch_send_call_function_ipi_mask(struct cpumask *mask);
 
@@ -44,11 +36,17 @@ void arch_send_call_function_single_ipi(int cpu);
 
 int riscv_hartid_to_cpuid(unsigned long hartid);
 
-/* Set custom IPI operations */
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
+/* Enable IPI for CPU hotplug */
+void riscv_ipi_enable(void);
+
+/* Disable IPI for CPU hotplug */
+void riscv_ipi_disable(void);
 
-/* Clear IPI for current CPU */
-void riscv_clear_ipi(void);
+/* Check if IPI interrupt numbers are available */
+bool riscv_ipi_have_virq_range(void);
+
+/* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
+void riscv_ipi_set_virq_range(int virq, int nr);
 
 /* Check other CPUs stop or not */
 bool smp_crash_stop_failed(void);
@@ -85,11 +83,20 @@ static inline unsigned long cpuid_to_hartid_map(int cpu)
 	return boot_cpu_hartid;
 }
 
-static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
+static inline void riscv_ipi_enable(void)
 {
 }
 
-static inline void riscv_clear_ipi(void)
+static inline void riscv_ipi_disable(void)
+{
+}
+
+static inline bool riscv_ipi_have_virq_range(void)
+{
+	return false;
+}
+
+static inline void riscv_ipi_set_virq_range(int virq, int nr)
 {
 }
 
arch/riscv/kernel/Makefile +1 -0
index 4cf303a779ab..67f542be1bea 100644
@@ -74,6 +74,7 @@ obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
 ifeq ($(CONFIG_RISCV_SBI), y)
+obj-$(CONFIG_SMP)		+= sbi-ipi.o
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
arch/riscv/kernel/cpu-hotplug.c +2 -1
index f7a832e3a1d1..39235cf50652 100644
@@ -13,7 +13,7 @@
 #include <asm/irq.h>
 #include <asm/cpu_ops.h>
 #include <asm/numa.h>
-#include <asm/sbi.h>
+#include <asm/smp.h>
 
 bool cpu_has_hotplug(unsigned int cpu)
 {
@@ -43,6 +43,7 @@ int __cpu_disable(void)
 	remove_cpu_topology(cpu);
 	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
+	riscv_ipi_disable();
 	irq_migrate_all_off_this_cpu();
 
 	return ret;
arch/riscv/kernel/irq.c +2 -1
index 96d3171f0ca1..eb9a68a539e6 100644
@@ -10,7 +10,7 @@
 #include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
-#include <asm/smp.h>
+#include <asm/sbi.h>
 
 static struct fwnode_handle *(*__get_intc_node)(void);
 
@@ -39,4 +39,5 @@ void __init init_IRQ(void)
 	irqchip_init();
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
+	sbi_ipi_init();
 }
arch/riscv/kernel/sbi-ipi.c new file +77 -0

77 lines not on this page · raw message

arch/riscv/kernel/sbi.c +16 -90

164 lines not on this page · raw message

arch/riscv/kernel/smp.c +79 -81

216 lines not on this page · raw message

arch/riscv/kernel/smpboot.c +2 -3
index ddb2afba6d25..00b53913d4c6 100644
@@ -30,7 +30,6 @@
 #include <asm/numa.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
-#include <asm/sbi.h>
 #include <asm/smp.h>
 
 #include "head.h"
@@ -158,12 +157,12 @@ asmlinkage __visible void smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int curr_cpuid = smp_processor_id();
 
-	riscv_clear_ipi();
-
 	/* All kernel threads share the same mm context.  */
 	mmgrab(mm);
 	current->active_mm = mm;
 
+	riscv_ipi_enable();
+
 	store_cpu_topology(curr_cpuid);
 	notify_cpu_starting(curr_cpuid);
 	numa_add_cpu(curr_cpuid);
drivers/clocksource/timer-clint.c +49 -16

129 lines not on this page · raw message

drivers/irqchip/Kconfig +1 -0
index 7dc990eb2c9b..2758bfdc2f2c 100644
@@ -535,6 +535,7 @@ config TI_PRUSS_INTC
 config RISCV_INTC
 	bool
 	depends on RISCV
+	select IRQ_DOMAIN_HIERARCHY
 
 config SIFIVE_PLIC
 	bool
drivers/irqchip/irq-riscv-intc.c +24 -31

82 lines not on this page · raw message

Signature · 1 line
2.34.1
author
#4 lore raw

PATCH v17 4/7 RISC-V: Allow marking IPIs as suitable for remote FENCEs

In reply to Anup Patel

To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the RISC-V kernel, we need hardware mechanism to directly inject IPI from the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls.

The upcoming AIA IMSIC devices allow direct IPI injection from the supervisor mode (i.e. RISC-V kernel). To support this, we extend the riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip drivers can mark IPIs as suitable for remote FENCEs.

---
 arch/riscv/include/asm/smp.h      | 18 ++++++++++++++++--
 arch/riscv/kernel/sbi-ipi.c       |  2 +-
 arch/riscv/kernel/smp.c           | 11 ++++++++++-
 drivers/clocksource/timer-clint.c |  2 +-
 4 files changed, 28 insertions(+), 5 deletions(-)
arch/riscv/include/asm/smp.h +16 -2
index 4fe7a8854c2e..c4b77017ec58 100644
@@ -16,6 +16,9 @@ struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
 #ifdef CONFIG_SMP
+
+#include <linux/jump_label.h>
+
 /*
  * Mapping between linux logical cpu index and hartid.
  */
@@ -46,7 +49,12 @@ void riscv_ipi_disable(void);
 bool riscv_ipi_have_virq_range(void);
 
 /* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
-void riscv_ipi_set_virq_range(int virq, int nr);
+void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence);
+
+/* Check if we can use IPIs for remote FENCEs */
+DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+#define riscv_use_ipi_for_rfence() \
+	static_branch_unlikely(&riscv_ipi_for_rfence)
 
 /* Check other CPUs stop or not */
 bool smp_crash_stop_failed(void);
@@ -96,10 +104,16 @@ static inline bool riscv_ipi_have_virq_range(void)
 	return false;
 }
 
-static inline void riscv_ipi_set_virq_range(int virq, int nr)
+static inline void riscv_ipi_set_virq_range(int virq, int nr,
+					    bool use_for_rfence)
 {
 }
 
+static inline bool riscv_use_ipi_for_rfence(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
arch/riscv/kernel/sbi-ipi.c +1 -1
index 41981ab88493..a4559695ce62 100644
@@ -72,6 +72,6 @@ void __init sbi_ipi_init(void)
 			  "irqchip/sbi-ipi:starting",
 			  sbi_ipi_starting_cpu, NULL);
 
-	riscv_ipi_set_virq_range(virq, BITS_PER_BYTE);
+	riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, false);
 	pr_info("providing IPIs using SBI IPI extension\n");
 }
arch/riscv/kernel/smp.c +10 -1
index 47e7ecfedb4d..5f985a197eff 100644
@@ -177,7 +177,10 @@ bool riscv_ipi_have_virq_range(void)
 	return (ipi_virq_base) ? true : false;
 }
 
-void riscv_ipi_set_virq_range(int virq, int nr)
+DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence);
+
+void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence)
 {
 	int i, err;
 
@@ -200,6 +203,12 @@ void riscv_ipi_set_virq_range(int virq, int nr)
 
 	/* Enabled IPIs for boot CPU immediately */
 	riscv_ipi_enable();
+
+	/* Update RFENCE static key */
+	if (use_for_rfence)
+		static_branch_enable(&riscv_ipi_for_rfence);
+	else
+		static_branch_disable(&riscv_ipi_for_rfence);
 }
 
 static const char * const ipi_names[] = {
drivers/clocksource/timer-clint.c +1 -1
index 7ccc16dd6a76..9a55e733ae99 100644
@@ -251,7 +251,7 @@ static int __init clint_timer_init_dt(struct device_node *np)
 	}
 
 	irq_set_chained_handler(clint_ipi_irq, clint_ipi_interrupt);
-	riscv_ipi_set_virq_range(rc, BITS_PER_BYTE);
+	riscv_ipi_set_virq_range(rc, BITS_PER_BYTE, true);
 	clint_clear_ipi();
 #endif
 
Signature · 1 line
2.34.1
author
#5 lore raw

PATCH v17 5/7 RISC-V: Use IPIs for remote TLB flush when possible

In reply to Anup Patel

If we have specialized interrupt controller (such as AIA IMSIC) which allows supervisor mode to directly inject IPIs without any assistance from M-mode or HS-mode then using such specialized interrupt controller, we can do remote TLB flushes directly from supervisor mode instead of using the SBI RFENCE calls.

This patch extends remote TLB flush functions to use supervisor mode IPIs whenever direct supervisor mode IPIs.are supported by interrupt controller.

---
 arch/riscv/mm/tlbflush.c | 93 +++++++++++++++++++++++++++++++++-------
 1 file changed, 78 insertions(+), 15 deletions(-)
arch/riscv/mm/tlbflush.c +78 -15
index ce7dfc81bb3f..91078377344d 100644
@@ -7,14 +7,62 @@
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+static inline void local_flush_tlb_range(unsigned long start,
+		unsigned long size, unsigned long stride)
+{
+	if (size <= stride)
+		local_flush_tlb_page(start);
+	else
+		local_flush_tlb_all();
+}
+
+static inline void local_flush_tlb_range_asid(unsigned long start,
+		unsigned long size, unsigned long stride, unsigned long asid)
+{
+	if (size <= stride)
+		local_flush_tlb_page_asid(start, asid);
+	else
+		local_flush_tlb_all_asid(asid);
+}
+
+static void __ipi_flush_tlb_all(void *info)
+{
+	local_flush_tlb_all();
+}
+
 void flush_tlb_all(void)
 {
-	sbi_remote_sfence_vma(NULL, 0, -1);
+	if (riscv_use_ipi_for_rfence())
+		on_each_cpu(__ipi_flush_tlb_all, NULL, 1);
+	else
+		sbi_remote_sfence_vma(NULL, 0, -1);
+}
+
+struct flush_tlb_range_data {
+	unsigned long asid;
+	unsigned long start;
+	unsigned long size;
+	unsigned long stride;
+};
+
+static void __ipi_flush_tlb_range_asid(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid);
+}
+
+static void __ipi_flush_tlb_range(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range(d->start, d->size, d->stride);
 }
 
-static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
-				  unsigned long size, unsigned long stride)
+static void __flush_tlb_range(struct mm_struct *mm, unsigned long start,
+			      unsigned long size, unsigned long stride)
 {
+	struct flush_tlb_range_data ftd;
 	struct cpumask *pmask = &mm->context.tlb_stale_mask;
 	struct cpumask *cmask = mm_cpumask(mm);
 	unsigned int cpuid;
@@ -39,19 +87,34 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 		cpumask_andnot(pmask, pmask, cmask);
 
 		if (broadcast) {
-			sbi_remote_sfence_vma_asid(cmask, start, size, asid);
-		} else if (size <= stride) {
-			local_flush_tlb_page_asid(start, asid);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = asid;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range_asid,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma_asid(cmask,
+							   start, size, asid);
 		} else {
-			local_flush_tlb_all_asid(asid);
+			local_flush_tlb_range_asid(start, size, stride, asid);
 		}
 	} else {
 		if (broadcast) {
-			sbi_remote_sfence_vma(cmask, start, size);
-		} else if (size <= stride) {
-			local_flush_tlb_page(start);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = 0;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma(cmask, start, size);
 		} else {
-			local_flush_tlb_all();
+			local_flush_tlb_range(start, size, stride);
 		}
 	}
 
@@ -60,23 +123,23 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	__sbi_tlb_flush_range(mm, 0, -1, PAGE_SIZE);
+	__flush_tlb_range(mm, 0, -1, PAGE_SIZE);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PAGE_SIZE);
 }
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PMD_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PMD_SIZE);
 }
 #endif
Signature · 1 line
2.34.1
author
#6 lore raw

PATCH v17 6/7 RISC-V: Use IPIs for remote icache flush when possible

In reply to Anup Patel

If we have specialized interrupt controller (such as AIA IMSIC) which allows supervisor mode to directly inject IPIs without any assistance from M-mode or HS-mode then using such specialized interrupt controller, we can do remote icache flushe directly from supervisor mode instead of using the SBI RFENCE calls.

This patch extends remote icache flush functions to use supervisor mode IPIs whenever direct supervisor mode IPIs.are supported by interrupt controller.

---
 arch/riscv/mm/cacheflush.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/riscv/mm/cacheflush.c +3 -2
index fcd6145fbead..20cec5e7cdbf 100644
@@ -19,7 +19,7 @@ void flush_icache_all(void)
 {
 	local_flush_icache_all();
 
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
+	if (IS_ENABLED(CONFIG_RISCV_SBI) && !riscv_use_ipi_for_rfence())
 		sbi_remote_fence_i(NULL);
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
@@ -67,7 +67,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 		 * with flush_icache_deferred().
 		 */
 		smp_mb();
-	} else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
+	} else if (IS_ENABLED(CONFIG_RISCV_SBI) &&
+		   !riscv_use_ipi_for_rfence()) {
 		sbi_remote_fence_i(&others);
 	} else {
 		on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
Signature · 1 line
2.34.1
author
#7 lore raw

PATCH v17 7/7 irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers

In reply to Anup Patel

We add empty irq_eoi() in RISC-V INTC driver for child irqchip drivers (such as PLIC, SBI IPI, CLINT, APLIC, IMSIC, etc) which implement chained handlers for parent per-HART local interrupts. This hels us avoid unnecessary mask/unmask of per-HART local interrupts at the time of handling interrupts.

---
 drivers/irqchip/irq-riscv-intc.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
drivers/irqchip/irq-riscv-intc.c +17 -0
index 784d25645704..f229e3e66387 100644
@@ -46,10 +46,27 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
+static void riscv_intc_irq_eoi(struct irq_data *d)
+{
+	/*
+	 * The RISC-V INTC driver uses handle_percpu_devid_irq() flow
+	 * for the per-HART local interrupts and child irqchip drivers
+	 * (such as PLIC, SBI IPI, CLINT, APLIC, IMSIC, etc) implement
+	 * chained handlers for the per-HART local interrupts.
+	 *
+	 * In the absence of irq_eoi(), the chained_irq_enter() and
+	 * chained_irq_exit() functions (used by child irqchip drivers)
+	 * will do unnecessary mask/unmask of per-HART local interrupts
+	 * at the time of handling interrupts. To avoid this, we provide
+	 * an empty irq_eoi() callback for RISC-V INTC irqchip.
+	 */
+}
+
 static struct irq_chip riscv_intc_chip = {
 	.name = "RISC-V INTC",
 	.irq_mask = riscv_intc_irq_mask,
 	.irq_unmask = riscv_intc_irq_unmask,
+	.irq_eoi = riscv_intc_irq_eoi,
 };
 
 static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
Signature · 1 line
2.34.1