dt-bindings: display: bridge: ldb: Add i.MX6SX support
Subsystems (4)
PATCH 1/2 dt-bindings: display: bridge: ldb: Add i.MX6SX support
From: Fabio Estevam <[email protected]>
i.MX6SX has a single LVDS port and share a similar LDB_CTRL register layout with i.MX8MP and i.MX93.
--- .../devicetree/bindings/display/bridge/fsl,ldb.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)
Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +11 -0
@@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - fsl,imx6sx-ldb - fsl,imx8mp-ldb - fsl,imx93-ldb
@@ -60,6 +61,16 @@ required: - ports allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx6sx-ldb + then: + properties: + ports: + properties: + port@2: false - if: properties: compatible:
Signature · 1 line
2.34.1
PATCH 2/2 drm/bridge: fsl-ldb: Add i.MX6SX support
From: Fabio Estevam <[email protected]>
i.MX6SX has a single LVDS port and share a similar LDB_CTRL register layout with i.MX8MP and i.MX93.
There is no LVDS CTRL register on the i.MX6SX, so only write to this register on the appropriate SoCs.
Add support for the i.MX6SX LDB.
Tested on a imx6sx-sdb board with a Hannstar HSD100PXN1 LVDS panel and also on a custom i.MX6SX-based board.
--- drivers/gpu/drm/bridge/fsl-ldb.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/gpu/drm/bridge/fsl-ldb.c +13 -1
@@ -56,6 +56,7 @@#define LVDS_CTRL_VBG_ADJ_MASK GENMASK(19, 17)enum fsl_ldb_devtype { +IMX6SX_LDB ,IMX8MP_LDB ,IMX93_LDB , };
@@ -64,9 +65,14 @@ struct fsl_ldb_devdata {u32 ldb_ctrl;u32 lvds_ctrl;bool lvds_en_bit; +bool not_lvds_ctrl; };static const struct fsl_ldb_devdata fsl_ldb_devdata[] = { + [IMX6SX_LDB ] = { + .ldb_ctrl =0x18 , + .not_lvds_ctrl = true, + }, [IMX8MP_LDB ] = { .ldb_ctrl =0x5c , .lvds_ctrl =0x128 ,
@@ -202,6 +208,9 @@ static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,regmap_write (fsl_ldb->regmap, fsl_ldb->devdata->ldb_ctrl, reg); +if (fsl_ldb->devdata->not_lvds_ctrl) +return ; +/* Program LVDS_CTRL */ reg =LVDS_CTRL_CC_ADJ (2 ) |LVDS_CTRL_PRE_EMPH_EN |LVDS_CTRL_PRE_EMPH_ADJ (3 ) |LVDS_CTRL_VBG_EN ;
@@ -228,7 +237,8 @@ static void fsl_ldb_atomic_disable(struct drm_bridge *bridge,regmap_write (fsl_ldb->regmap, fsl_ldb->devdata->lvds_ctrl,LVDS_CTRL_LVDS_EN ); else - regmap_write(fsl_ldb->regmap, fsl_ldb->devdata->lvds_ctrl, 0); + if (!fsl_ldb->devdata->not_lvds_ctrl) +regmap_write (fsl_ldb->regmap, fsl_ldb->devdata->lvds_ctrl,0 );regmap_write (fsl_ldb->regmap, fsl_ldb->devdata->ldb_ctrl,0 );clk_disable_unprepare (fsl_ldb->clk);
@@ -355,6 +365,8 @@ static void fsl_ldb_remove(struct platform_device *pdev) }static const struct of_device_id fsl_ldb_match[] = { + { .compatible ="fsl,imx6sx-ldb" , + .data = &fsl_ldb_devdata[IMX6SX_LDB ], }, { .compatible ="fsl,imx8mp-ldb" , .data = &fsl_ldb_devdata[IMX8MP_LDB ], }, { .compatible ="fsl,imx93-ldb" ,
Signature · 1 line
2.34.1
Quoted 26 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
i.MX6SX has a single LVDS port and share a similar
LDB_CTRLregister layout with i.MX8MP and i.MX93.Signed-off-by Fabio Estevam <[email protected]>--- .../devicetree/bindings/display/bridge/fsl,ldb.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +1
-0@@ -17,6 +17,7 @@ description: | properties: compatible: enum: + - fsl,imx6sx-ldb - fsl,imx8mp-ldb - fsl,imx93-ldb@@ -60,6 +61,16 @@ required: - ports allOf:
Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml required: · line 73
Quoted 10 lines
Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml +10
-0+ - if: + properties: + compatible: + contains: + const: fsl,imx6sx-ldb + then: + properties: + ports: + properties: + port@2: false
Don't duplicate entire if needlessly. It's the same as other one, so add your compatible there.
Best regards,
Krzysztof