Interrupt cleanup and future-proofing
Subsystems (2)
cover Interrupt cleanup and future-proofing
A lot of the interrupt code in the Xe driver was copied directly from i915. Since Xe only supports Xe_LP and later platforms, there's some cleanup and simplification that can be done.
Also fix one mistake that would have become a bug in the future if we ever wind up with a multi-tile platform that also supports display.
Matt Roper (8):
drm/xe/irq: Drop gen3_ prefixes
drm/xe/irq: Add helpers to find ISR/IIR/IMR/IER registers drm/xe/irq: Drop IRQ_INIT and IRQ_RESET macros drm/xe/irq: Drop unnecessary GEN11_ and GEN12_ register prefixes drm/xe/irq: Rename and clarify top-level interrupt handling routines drm/xe/irq: Drop remaining "gen11_" prefix from IRQ functions drm/xe/irq: Drop commented-out code for non-existent media engines drm/xe/irq: Don't clobber display interrupts on multi-tile platforms
drivers/gpu/drm/xe/regs/xe_gt_regs.h | 42 ++-- drivers/gpu/drm/xe/regs/xe_reg_defs.h | 8 + drivers/gpu/drm/xe/regs/xe_regs.h | 25 +-- drivers/gpu/drm/xe/xe_guc.c | 6 +- drivers/gpu/drm/xe/xe_irq.c | 280 +++++++++++++------------- 5 files changed, 178 insertions(+), 183 deletions(-)
Signature · 1 line
2.39.2
PATCH 1/8 drm/xe/irq: Drop gen3_ prefixes
"Gen" terminology should be avoided in the Xe driver and "gen3" refers to platforms that are 9 (!!) graphics generations earlier than the oldest supported by the Xe driver, so this prefix really doesn't make sense.
--- drivers/gpu/drm/xe/xe_irq.c | 42 ++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_irq.c +20 -22
@@ -19,7 +19,7 @@#include "xe_hw_engine.h" #include "xe_mmio.h" -static void gen3_assert_iir_is_zero (struct xe_gt *gt,i915_reg_t reg) +static void assert_iir_is_zero (struct xe_gt *gt,i915_reg_t reg) {u32 val =xe_mmio_read32 (gt, reg.reg);
@@ -35,24 +35,24 @@ static void gen3_assert_iir_is_zero(struct xe_gt *gt, i915_reg_t reg)xe_mmio_read32 (gt, reg.reg); } -static void gen3_irq_init (struct xe_gt *gt, -i915_reg_t imr,u32 imr_val, -i915_reg_t ier,u32 ier_val, -i915_reg_t iir) +static void irq_init (struct xe_gt *gt, +i915_reg_t imr,u32 imr_val, +i915_reg_t ier,u32 ier_val, +i915_reg_t iir) { -gen3_assert_iir_is_zero (gt, iir); +assert_iir_is_zero (gt, iir);xe_mmio_write32 (gt, ier.reg, ier_val);xe_mmio_write32 (gt, imr.reg, imr_val);xe_mmio_read32 (gt, imr.reg); } -#define GEN3_IRQ_INIT (gt, type, imr_val, ier_val) \ - gen3_irq_init((gt), \ - type##IMR, imr_val, \ - type##IER, ier_val, \ - type##IIR) +#define IRQ_INIT (gt, type, imr_val, ier_val) \ + irq_init((gt), \ + type##IMR, imr_val, \ + type##IER, ier_val, \ + type##IIR) -static void gen3_irq_reset (struct xe_gt *gt,i915_reg_t imr,i915_reg_t iir, +static void irq_reset (struct xe_gt *gt,i915_reg_t imr,i915_reg_t iir,i915_reg_t ier) {xe_mmio_write32 (gt, imr.reg,0xffffffff );
@@ -66,8 +66,8 @@ static void gen3_irq_reset(struct xe_gt *gt, i915_reg_t imr, i915_reg_t iir,xe_mmio_write32 (gt, iir.reg,0xffffffff );xe_mmio_read32 (gt, iir.reg); } -#define GEN3_IRQ_RESET (gt, type) \ - gen3_irq_reset((gt), type##IMR, type##IIR, type##IER) +#define IRQ_RESET (gt, type) \ + irq_reset((gt), type##IMR, type##IIR, type##IER)static u32 gen11_intr_disable (struct xe_gt *gt) {
@@ -173,8 +173,7 @@ static void gen11_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)gen11_gt_irq_postinstall (xe, gt); -GEN3_IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE , -GEN11_GU_MISC_GSE ); +IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE );gen11_intr_enable (gt, true); }
@@ -337,8 +336,7 @@ static void dg1_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) {gen11_gt_irq_postinstall (xe, gt); -GEN3_IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE , -GEN11_GU_MISC_GSE ); +IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE );if (gt->info.id ==XE_GT0 )dg1_intr_enable (xe, true);
@@ -443,8 +441,8 @@ static void gen11_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -GEN3_IRQ_RESET (gt,GEN11_GU_MISC_ ); -GEN3_IRQ_RESET (gt,GEN8_PCU_ ); +IRQ_RESET (gt,GEN11_GU_MISC_ ); +IRQ_RESET (gt,GEN8_PCU_ ); }static void dg1_irq_reset (struct xe_gt *gt)
@@ -454,8 +452,8 @@ static void dg1_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -GEN3_IRQ_RESET (gt,GEN11_GU_MISC_ ); -GEN3_IRQ_RESET (gt,GEN8_PCU_ ); +IRQ_RESET (gt,GEN11_GU_MISC_ ); +IRQ_RESET (gt,GEN8_PCU_ ); }static void xe_irq_reset (struct xe_device *xe)
Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 1/8] drm/xe/irq: Drop gen3_ prefixes
Quoted 6 lines · Matt Roper
"Gen" terminology should be avoided in the Xe driver and "gen3" refers to platforms that are 9 (!!) graphics generations earlier than the oldest supported by the Xe driver, so this prefix really doesn't make sense.
Signed-off-by Matt Roper <[email protected]>
Not sure what we are going to do with drivers/gpu/drm/xe/display/ext/i915_irq.c that is tangentially related.... I think eventually it will be dropped, so let's ignore.
thanks
Lucas De Marchi
PATCH 2/8 drm/xe/irq: Add helpers to find ISR/IIR/IMR/IER registers
In reply to Matt RoperFor cases where IRQ_INIT and IRQ_RESET are used, the relevant interrupt registers are always consecutive and ordered ISR, IMR, IIR, IER. Adding helpers to look these up from a base offset will let us eliminate some of the CPP pasting and simplify other upcoming patches.
--- drivers/gpu/drm/xe/regs/xe_reg_defs.h | 8 ++++++++ drivers/gpu/drm/xe/regs/xe_regs.h | 11 ++--------- drivers/gpu/drm/xe/xe_irq.c | 24 ++++++++++++------------ 3 files changed, 22 insertions(+), 21 deletions(-)
drivers/gpu/drm/xe/regs/xe_reg_defs.h +8 -0
@@ -8,4 +8,12 @@#include "compat-i915-headers/i915_reg_defs.h" +/* +* Interrupt registers for a unit are always consecutive and ordered +* ISR, IMR, IIR, IER. +*/ +#define IMR (offset) _MMIO(offset + 0x4) +#define IIR (offset) _MMIO(offset + 0x8) +#define IER (offset) _MMIO(offset + 0xc) +#endif
drivers/gpu/drm/xe/regs/xe_regs.h +2 -9
@@ -76,15 +76,8 @@#define SOFTWARE_FLAGS_SPR33 _MMIO(0x4f084) -#define GEN8_PCU_ISR _MMIO(0x444e0) -#define GEN8_PCU_IMR _MMIO(0x444e4) -#define GEN8_PCU_IIR _MMIO(0x444e8) -#define GEN8_PCU_IER _MMIO(0x444ec) - -#define GEN11_GU_MISC_ISR _MMIO(0x444f0) -#define GEN11_GU_MISC_IMR _MMIO(0x444f4) -#define GEN11_GU_MISC_IIR _MMIO(0x444f8) -#define GEN11_GU_MISC_IER _MMIO(0x444fc) +#define PCU_IRQ_REGS 0x444e0 +#define GU_MISC_IRQ_REGS 0x444f0#define GEN11_GU_MISC_GSE (1 << 27)#define GEN11_GFX_MSTR_IRQ _MMIO(0x190010)
drivers/gpu/drm/xe/xe_irq.c +12 -12
@@ -48,9 +48,9 @@ static void irq_init(struct xe_gt *gt, }#define IRQ_INIT (gt, type, imr_val, ier_val) \ irq_init((gt), \ - type##IMR, imr_val, \ - type##IER, ier_val, \ - type##IIR) + IMR(type), imr_val, \ + IER(type), ier_val, \ + IIR(type))static void irq_reset (struct xe_gt *gt,i915_reg_t imr,i915_reg_t iir,i915_reg_t ier)
@@ -67,7 +67,7 @@ static void irq_reset(struct xe_gt *gt, i915_reg_t imr, i915_reg_t iir,xe_mmio_read32 (gt, iir.reg); }#define IRQ_RESET (gt, type) \ - irq_reset((gt), type##IMR, type##IIR, type##IER) + irq_reset((gt), IMR(type), IIR(type), IER(type))static u32 gen11_intr_disable (struct xe_gt *gt) {
@@ -90,9 +90,9 @@ gen11_gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl)if (!(master_ctl &GEN11_GU_MISC_IRQ ))return 0 ; - iir =xe_mmio_read32 (gt,GEN11_GU_MISC_IIR .reg); + iir =xe_mmio_read32 (gt,IIR (GU_MISC_IRQ_REGS ).reg);if (likely (iir)) -xe_mmio_write32 (gt,GEN11_GU_MISC_IIR .reg, iir); +xe_mmio_write32 (gt,IIR (GU_MISC_IRQ_REGS ).reg, iir);return iir; }
@@ -173,7 +173,7 @@ static void gen11_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)gen11_gt_irq_postinstall (xe, gt); -IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE ); +IRQ_INIT (gt,GU_MISC_IRQ_REGS , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE );gen11_intr_enable (gt, true); }
@@ -336,7 +336,7 @@ static void dg1_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) {gen11_gt_irq_postinstall (xe, gt); -IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE ); +IRQ_INIT (gt,GU_MISC_IRQ_REGS , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE );if (gt->info.id ==XE_GT0 )dg1_intr_enable (xe, true);
@@ -441,8 +441,8 @@ static void gen11_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -IRQ_RESET (gt,GEN11_GU_MISC_ ); -IRQ_RESET (gt,GEN8_PCU_ ); +IRQ_RESET (gt,GU_MISC_IRQ_REGS ); +IRQ_RESET (gt,PCU_IRQ_REGS ); }static void dg1_irq_reset (struct xe_gt *gt)
@@ -452,8 +452,8 @@ static void dg1_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -IRQ_RESET (gt,GEN11_GU_MISC_ ); -IRQ_RESET (gt,GEN8_PCU_ ); +IRQ_RESET (gt,GU_MISC_IRQ_REGS ); +IRQ_RESET (gt,PCU_IRQ_REGS ); }static void xe_irq_reset (struct xe_device *xe)
Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 2/8] drm/xe/irq: Add helpers to find ISR/IIR/IMR/IER registers
Quoted 17 lines · Matt Roper
For cases where
IRQ_INITandIRQ_RESETare used, the relevant interrupt registers are always consecutive and ordered ISR, IMR, IIR, IER. Adding helpers to look these up from a base offset will let us eliminate some of the CPP pasting and simplify other upcoming patches.Signed-off-by Matt Roper <[email protected]>---
drivers/gpu/drm/xe/regs/xe_reg_defs.h | 8 ++++++++ drivers/gpu/drm/xe/regs/xe_regs.h | 11 ++--------- drivers/gpu/drm/xe/xe_irq.c | 24 ++++++++++++------------ 3 files changed, 22 insertions(+), 21 deletions(-)drivers/gpu/drm/xe/regs/xe_reg_defs.h +0
-0
drivers/gpu/drm/xe/regs/xe_reg_defs.h line 17
Quoted 10 lines
drivers/gpu/drm/xe/regs/xe_reg_defs.h +7
-0@@ -8,4 +8,12 @@#include "compat-i915-headers/i915_reg_defs.h" +/* +* Interrupt registers for a unit are always consecutive and ordered +* ISR, IMR, IIR, IER. +*/ +#define IMR (offset) _MMIO(offset + 0x4) +#define IIR (offset) _MMIO(offset + 0x8) +#define IER (offset) _MMIO(offset + 0xc)
since this is only to ever be used while handling the irqs in xe_irq.c, wouldn't it be better o make it local to them local to that file?
My worry is that xe_reg_defs.h is the one file included by the world, directly or indirectly and these IMR/IIR/IER short macros, although nice would be poluting the "namespace".
Quoted 11 lines
drivers/gpu/drm/xe/regs/xe_reg_defs.h +1
-0+#endif drivers/gpu/drm/xe/regs/xe_regs.h +0
-1@@ -76,15 +76,8 @@#define SOFTWARE_FLAGS_SPR33 _MMIO(0x4f084) -#define GEN8_PCU_ISR _MMIO(0x444e0)
drivers/gpu/drm/xe/regs/xe_regs.h line 80
Quoted 10 lines
drivers/gpu/drm/xe/regs/xe_regs.h +2
-8-#define GEN8_PCU_IMR _MMIO(0x444e4) -#define GEN8_PCU_IIR _MMIO(0x444e8) -#define GEN8_PCU_IER _MMIO(0x444ec) - -#define GEN11_GU_MISC_ISR _MMIO(0x444f0) -#define GEN11_GU_MISC_IMR _MMIO(0x444f4) -#define GEN11_GU_MISC_IIR _MMIO(0x444f8) -#define GEN11_GU_MISC_IER _MMIO(0x444fc) +#define PCU_IRQ_REGS 0x444e0 +#define GU_MISC_IRQ_REGS 0x444f0
we now have:
*_BASE *_OFFSET *_REGS
to refer to the plain u32 value. Should we consolidate in just one? Maybe _OFFSET would be one that could be applied both when it's a "base", in the sense of HW unit, and when it's "the start of similar registers".
otherwise the simplication and avoiding the macro pasting looks pretty good and a little bit more grep-able.
thanks
Lucas De Marchi
Quoted 84 lines
drivers/gpu/drm/xe/regs/xe_regs.h +0
-0#define GEN11_GU_MISC_GSE (1 << 27)#define GEN11_GFX_MSTR_IRQ _MMIO(0x190010)drivers/gpu/drm/xe/xe_irq.c +12
-12@@ -48,9 +48,9 @@ static void irq_init(struct xe_gt *gt, }#define IRQ_INIT (gt, type, imr_val, ier_val) \ irq_init((gt), \ - type##IMR, imr_val, \ - type##IER, ier_val, \ - type##IIR) + IMR(type), imr_val, \ + IER(type), ier_val, \ + IIR(type))static void irq_reset (struct xe_gt *gt,i915_reg_t imr,i915_reg_t iir,i915_reg_t ier)@@ -67,7 +67,7 @@ static void irq_reset(struct xe_gt *gt, i915_reg_t imr, i915_reg_t iir,xe_mmio_read32 (gt, iir.reg); }#define IRQ_RESET (gt, type) \ - irq_reset((gt), type##IMR, type##IIR, type##IER) + irq_reset((gt), IMR(type), IIR(type), IER(type))static u32 gen11_intr_disable (struct xe_gt *gt) {@@ -90,9 +90,9 @@ gen11_gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl)if (!(master_ctl &GEN11_GU_MISC_IRQ ))return 0 ; - iir =xe_mmio_read32 (gt,GEN11_GU_MISC_IIR .reg); + iir =xe_mmio_read32 (gt,IIR (GU_MISC_IRQ_REGS ).reg);if (likely (iir)) -xe_mmio_write32 (gt,GEN11_GU_MISC_IIR .reg, iir); +xe_mmio_write32 (gt,IIR (GU_MISC_IRQ_REGS ).reg, iir);return iir; }@@ -173,7 +173,7 @@ static void gen11_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)gen11_gt_irq_postinstall (xe, gt); -IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE ); +IRQ_INIT (gt,GU_MISC_IRQ_REGS , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE );gen11_intr_enable (gt, true); }@@ -336,7 +336,7 @@ static void dg1_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) {gen11_gt_irq_postinstall (xe, gt); -IRQ_INIT (gt,GEN11_GU_MISC_ , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE ); +IRQ_INIT (gt,GU_MISC_IRQ_REGS , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE );if (gt->info.id ==XE_GT0 )dg1_intr_enable (xe, true);@@ -441,8 +441,8 @@ static void gen11_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -IRQ_RESET (gt,GEN11_GU_MISC_ ); -IRQ_RESET (gt,GEN8_PCU_ ); +IRQ_RESET (gt,GU_MISC_IRQ_REGS ); +IRQ_RESET (gt,PCU_IRQ_REGS ); }static void dg1_irq_reset (struct xe_gt *gt)@@ -452,8 +452,8 @@ static void dg1_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -IRQ_RESET (gt,GEN11_GU_MISC_ ); -IRQ_RESET (gt,GEN8_PCU_ ); +IRQ_RESET (gt,GU_MISC_IRQ_REGS ); +IRQ_RESET (gt,PCU_IRQ_REGS ); }static void xe_irq_reset (struct xe_device *xe)Signature · 1 line
2.39.2
PATCH 3/8 drm/xe/irq: Drop IRQ_INIT and IRQ_RESET macros
In reply to Matt RoperIt's no longer necessary to wrap these operations in macros; a simple function will suffice. Also switch to function names that more clearly describe what operation is being performed: unmask_and_enable() and mask_and_disable().
--- drivers/gpu/drm/xe/xe_irq.c | 63 +++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 31 deletions(-)
drivers/gpu/drm/xe/xe_irq.c +32 -31
@@ -35,39 +35,40 @@ static void assert_iir_is_zero(struct xe_gt *gt, i915_reg_t reg)xe_mmio_read32 (gt, reg.reg); } -static void irq_init (struct xe_gt *gt, -i915_reg_t imr,u32 imr_val, -i915_reg_t ier,u32 ier_val, -i915_reg_t iir) +/* +* Unmask and enable the specified interrupts. Does not check current state, +* so any bits not specified here will become masked and disabled. +*/ +static void unmask_and_enable (struct xe_gt *gt,u32 irqregs,u32 bits) { -assert_iir_is_zero (gt, iir); +/* +* If we're just enabling an interrupt now, it shouldn't already +* be raised in the IIR. +*/ +assert_iir_is_zero (gt,IIR (irqregs)); + +xe_mmio_write32 (gt,IER (irqregs).reg, bits); +xe_mmio_write32 (gt,IMR (irqregs).reg, ~bits); -xe_mmio_write32 (gt, ier.reg, ier_val); -xe_mmio_write32 (gt, imr.reg, imr_val); -xe_mmio_read32 (gt, imr.reg); +/* Posting read */ +xe_mmio_read32 (gt,IMR (irqregs).reg); } -#define IRQ_INIT (gt, type, imr_val, ier_val) \ - irq_init((gt), \ - IMR(type), imr_val, \ - IER(type), ier_val, \ - IIR(type)) - -static void irq_reset (struct xe_gt *gt,i915_reg_t imr,i915_reg_t iir, -i915_reg_t ier) + +/* Mask and disable all interrupts. */ +static void mask_and_disable (struct xe_gt *gt,u32 irqregs) { -xe_mmio_write32 (gt, imr.reg,0xffffffff ); -xe_mmio_read32 (gt, imr.reg); +xe_mmio_write32 (gt,IMR (irqregs).reg, ~0 ); +/* Posting read */ +xe_mmio_read32 (gt,IMR (irqregs).reg); -xe_mmio_write32 (gt, ier.reg,0 ); +xe_mmio_write32 (gt,IER (irqregs).reg,0 );/* IIR can theoretically queue up two events. Be paranoid. */ -xe_mmio_write32 (gt, iir.reg,0xffffffff ); -xe_mmio_read32 (gt, iir.reg); -xe_mmio_write32 (gt, iir.reg,0xffffffff ); -xe_mmio_read32 (gt, iir.reg); +xe_mmio_write32 (gt,IIR (irqregs).reg, ~0 ); +xe_mmio_read32 (gt,IIR (irqregs).reg); +xe_mmio_write32 (gt,IIR (irqregs).reg, ~0 ); +xe_mmio_read32 (gt,IIR (irqregs).reg); } -#define IRQ_RESET (gt, type) \ - irq_reset((gt), IMR(type), IIR(type), IER(type))static u32 gen11_intr_disable (struct xe_gt *gt) {
@@ -173,7 +174,7 @@ static void gen11_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)gen11_gt_irq_postinstall (xe, gt); -IRQ_INIT (gt,GU_MISC_IRQ_REGS , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE ); +unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GEN11_GU_MISC_GSE );gen11_intr_enable (gt, true); }
@@ -336,7 +337,7 @@ static void dg1_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) {gen11_gt_irq_postinstall (xe, gt); -IRQ_INIT (gt,GU_MISC_IRQ_REGS , ~GEN11_GU_MISC_GSE ,GEN11_GU_MISC_GSE ); +unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GEN11_GU_MISC_GSE );if (gt->info.id ==XE_GT0 )dg1_intr_enable (xe, true);
@@ -441,8 +442,8 @@ static void gen11_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -IRQ_RESET (gt,GU_MISC_IRQ_REGS ); -IRQ_RESET (gt,PCU_IRQ_REGS ); +mask_and_disable (gt,GU_MISC_IRQ_REGS ); +mask_and_disable (gt,PCU_IRQ_REGS ); }static void dg1_irq_reset (struct xe_gt *gt)
@@ -452,8 +453,8 @@ static void dg1_irq_reset(struct xe_gt *gt)gen11_gt_irq_reset (gt); -IRQ_RESET (gt,GU_MISC_IRQ_REGS ); -IRQ_RESET (gt,PCU_IRQ_REGS ); +mask_and_disable (gt,GU_MISC_IRQ_REGS ); +mask_and_disable (gt,PCU_IRQ_REGS ); }static void xe_irq_reset (struct xe_device *xe)
Signature · 1 line
2.39.2
PATCH 4/8 drm/xe/irq: Drop unnecessary GEN11_ and GEN12_ register prefixes
In reply to Matt RoperAny interrupt registers that were introduced by platforms i915 considered to be "gen11" or "gen12" are present on all platforms that the Xe driver supports; drop the unnecessary prefixes.
While working in the area, also convert a few open-coded bit manipulations over to REG_BIT and REG_FIELD_GET notation.
--- drivers/gpu/drm/xe/regs/xe_gt_regs.h | 42 +++++------ drivers/gpu/drm/xe/regs/xe_regs.h | 12 +-- drivers/gpu/drm/xe/xe_guc.c | 6 +- drivers/gpu/drm/xe/xe_irq.c | 109 +++++++++++++-------------- 4 files changed, 84 insertions(+), 85 deletions(-)
drivers/gpu/drm/xe/regs/xe_gt_regs.h +21 -21
@@ -348,34 +348,34 @@#define GFX_FLSH_CNTL_GEN6 _MMIO(0x101008)#define GFX_FLSH_CNTL_EN (1 << 0) -#define GEN11_GT_INTR_DW (x) _MMIO(0x190018 + ((x) * 4)) +#define GT_INTR_DW (x) _MMIO(0x190018 + ((x) * 4)) -#define GEN11_GUC_SG_INTR_ENABLE _MMIO(0x190038) +#define GUC_SG_INTR_ENABLE _MMIO(0x190038)#define ENGINE1_MASK REG_GENMASK(31, 16)#define ENGINE0_MASK REG_GENMASK(15, 0) -#define GEN11_GPM_WGBOXPERF_INTR_ENABLE _MMIO(0x19003c) +#define GPM_WGBOXPERF_INTR_ENABLE _MMIO(0x19003c) -#define GEN11_INTR_IDENTITY_REG (x) _MMIO(0x190060 + ((x) * 4)) -#define GEN11_INTR_DATA_VALID (1 << 31) -#define GEN11_INTR_ENGINE_INSTANCE (x) (((x) & GENMASK(25, 20)) >> 20) -#define GEN11_INTR_ENGINE_CLASS (x) (((x) & GENMASK(18, 16)) >> 16) -#define GEN11_INTR_ENGINE_INTR (x) ((x) & 0xffff) +#define INTR_IDENTITY_REG (x) _MMIO(0x190060 + ((x) * 4)) +#define INTR_DATA_VALID REG_BIT(31) +#define INTR_ENGINE_INSTANCE (x) REG_FIELD_GET(GENMASK(25, 20), x) +#define INTR_ENGINE_CLASS (x) REG_FIELD_GET(GENMASK(18, 16), x) +#define INTR_ENGINE_INTR (x) REG_FIELD_GET(GENMASK(15, 0), x)#define OTHER_GUC_INSTANCE 0 -#define GEN11_RENDER_COPY_INTR_ENABLE _MMIO(0x190030) -#define GEN11_VCS_VECS_INTR_ENABLE _MMIO(0x190034) -#define GEN12_CCS_RSVD_INTR_ENABLE _MMIO(0x190048) -#define GEN11_IIR_REG_SELECTOR (x) _MMIO(0x190070 + ((x) * 4)) -#define GEN11_RCS0_RSVD_INTR_MASK _MMIO(0x190090) -#define GEN11_BCS_RSVD_INTR_MASK _MMIO(0x1900a0) -#define GEN11_VCS0_VCS1_INTR_MASK _MMIO(0x1900a8) -#define GEN11_VCS2_VCS3_INTR_MASK _MMIO(0x1900ac) -#define GEN11_VECS0_VECS1_INTR_MASK _MMIO(0x1900d0) -#define GEN11_GUC_SG_INTR_MASK _MMIO(0x1900e8) -#define GEN11_GPM_WGBOXPERF_INTR_MASK _MMIO(0x1900ec) -#define GEN12_CCS0_CCS1_INTR_MASK _MMIO(0x190100) -#define GEN12_CCS2_CCS3_INTR_MASK _MMIO(0x190104) +#define RENDER_COPY_INTR_ENABLE _MMIO(0x190030) +#define VCS_VECS_INTR_ENABLE _MMIO(0x190034) +#define CCS_RSVD_INTR_ENABLE _MMIO(0x190048) +#define IIR_REG_SELECTOR (x) _MMIO(0x190070 + ((x) * 4)) +#define RCS0_RSVD_INTR_MASK _MMIO(0x190090) +#define BCS_RSVD_INTR_MASK _MMIO(0x1900a0) +#define VCS0_VCS1_INTR_MASK _MMIO(0x1900a8) +#define VCS2_VCS3_INTR_MASK _MMIO(0x1900ac) +#define VECS0_VECS1_INTR_MASK _MMIO(0x1900d0) +#define GUC_SG_INTR_MASK _MMIO(0x1900e8) +#define GPM_WGBOXPERF_INTR_MASK _MMIO(0x1900ec) +#define CCS0_CCS1_INTR_MASK _MMIO(0x190100) +#define CCS2_CCS3_INTR_MASK _MMIO(0x190104)#define XEHPC_BCS1_BCS2_INTR_MASK _MMIO(0x190110)#define XEHPC_BCS3_BCS4_INTR_MASK _MMIO(0x190114)#define XEHPC_BCS5_BCS6_INTR_MASK _MMIO(0x190118)
drivers/gpu/drm/xe/regs/xe_regs.h +6 -6
@@ -78,13 +78,13 @@#define PCU_IRQ_REGS 0x444e0#define GU_MISC_IRQ_REGS 0x444f0 -#define GEN11_GU_MISC_GSE (1 << 27) +#define GU_MISC_GSE REG_BIT(27) -#define GEN11_GFX_MSTR_IRQ _MMIO(0x190010) -#define GEN11_MASTER_IRQ (1 << 31) -#define GEN11_GU_MISC_IRQ (1 << 29) -#define GEN11_DISPLAY_IRQ (1 << 16) -#define GEN11_GT_DW_IRQ (x) (1 << (x)) +#define GFX_MSTR_IRQ _MMIO(0x190010) +#define MASTER_IRQ REG_BIT(31) +#define GU_MISC_IRQ REG_BIT(29) +#define DISPLAY_IRQ REG_BIT(16) +#define GT_DW_IRQ (x) REG_BIT(x)#define DG1_MSTR_TILE_INTR _MMIO(0x190008)#define DG1_MSTR_IRQ REG_BIT(31)
drivers/gpu/drm/xe/xe_guc.c +3 -3
@@ -561,12 +561,12 @@ static void guc_enable_irq(struct xe_guc *guc) REG_FIELD_PREP(ENGINE0_MASK, GUC_INTR_GUC2HOST) :REG_FIELD_PREP (ENGINE1_MASK ,GUC_INTR_GUC2HOST ); -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_ENABLE .reg, +xe_mmio_write32 (gt,GUC_SG_INTR_ENABLE .reg,REG_FIELD_PREP (ENGINE1_MASK ,GUC_INTR_GUC2HOST ));if (xe_gt_is_media_type (gt)) -xe_mmio_rmw32 (gt,GEN11_GUC_SG_INTR_MASK .reg, events,0 ); +xe_mmio_rmw32 (gt,GUC_SG_INTR_MASK .reg, events,0 );else -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_MASK .reg, ~events); +xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~events); }int xe_guc_enable_communication (struct xe_guc *guc)
drivers/gpu/drm/xe/xe_irq.c +54 -55
244 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 4/8] drm/xe/irq: Drop unnecessary GEN11_ and GEN12_ register prefixes
Quoted 11 lines · Matt Roper
Any interrupt registers that were introduced by platforms i915 considered to be "gen11" or "gen12" are present on all platforms that the Xe driver supports; drop the unnecessary prefixes.
While working in the area, also convert a few open-coded bit manipulations over to
REG_BITandREG_FIELD_GETnotation.Signed-off-by Matt Roper <[email protected]>---
drivers/gpu/drm/xe/regs/xe_gt_regs.h | 42 +++++------ drivers/gpu/drm/xe/regs/xe_regs.h | 12 +--
I was thinking more on an approach of cleaning up the entire driver:
get all the defines from regs/* that have the GEN*_ or _GEN* suffix and drop the suffix.
I wrote it some time ago, but was having some issues with display/ failing to compile because of that (some of the ifdef's inside i915 use our register defines).
Since this is done for irq, with more contained changes, I won't oppose though. It's going in the right direction.
Checked with --color-words and it does what it says
thanks
Lucas De Marchi
Quoted 374 lines
drivers/gpu/drm/xe/xe_guc.c| 6 +-drivers/gpu/drm/xe/xe_irq.c| 109 +++++++++++++--------------4 files changed, 84 insertions(+), 85 deletions(-)drivers/gpu/drm/xe/regs/xe_gt_regs.h +21
-21@@ -348,34 +348,34 @@#define GFX_FLSH_CNTL_GEN6 _MMIO(0x101008)#define GFX_FLSH_CNTL_EN (1 << 0) -#define GEN11_GT_INTR_DW (x) _MMIO(0x190018 + ((x) * 4)) +#define GT_INTR_DW (x) _MMIO(0x190018 + ((x) * 4)) -#define GEN11_GUC_SG_INTR_ENABLE _MMIO(0x190038) +#define GUC_SG_INTR_ENABLE _MMIO(0x190038)#define ENGINE1_MASK REG_GENMASK(31, 16)#define ENGINE0_MASK REG_GENMASK(15, 0) -#define GEN11_GPM_WGBOXPERF_INTR_ENABLE _MMIO(0x19003c) +#define GPM_WGBOXPERF_INTR_ENABLE _MMIO(0x19003c) -#define GEN11_INTR_IDENTITY_REG (x) _MMIO(0x190060 + ((x) * 4)) -#define GEN11_INTR_DATA_VALID (1 << 31) -#define GEN11_INTR_ENGINE_INSTANCE (x) (((x) & GENMASK(25, 20)) >> 20) -#define GEN11_INTR_ENGINE_CLASS (x) (((x) & GENMASK(18, 16)) >> 16) -#define GEN11_INTR_ENGINE_INTR (x) ((x) & 0xffff) +#define INTR_IDENTITY_REG (x) _MMIO(0x190060 + ((x) * 4)) +#define INTR_DATA_VALID REG_BIT(31) +#define INTR_ENGINE_INSTANCE (x) REG_FIELD_GET(GENMASK(25, 20), x) +#define INTR_ENGINE_CLASS (x) REG_FIELD_GET(GENMASK(18, 16), x) +#define INTR_ENGINE_INTR (x) REG_FIELD_GET(GENMASK(15, 0), x)#define OTHER_GUC_INSTANCE 0 -#define GEN11_RENDER_COPY_INTR_ENABLE _MMIO(0x190030) -#define GEN11_VCS_VECS_INTR_ENABLE _MMIO(0x190034) -#define GEN12_CCS_RSVD_INTR_ENABLE _MMIO(0x190048) -#define GEN11_IIR_REG_SELECTOR (x) _MMIO(0x190070 + ((x) * 4)) -#define GEN11_RCS0_RSVD_INTR_MASK _MMIO(0x190090) -#define GEN11_BCS_RSVD_INTR_MASK _MMIO(0x1900a0) -#define GEN11_VCS0_VCS1_INTR_MASK _MMIO(0x1900a8) -#define GEN11_VCS2_VCS3_INTR_MASK _MMIO(0x1900ac) -#define GEN11_VECS0_VECS1_INTR_MASK _MMIO(0x1900d0) -#define GEN11_GUC_SG_INTR_MASK _MMIO(0x1900e8) -#define GEN11_GPM_WGBOXPERF_INTR_MASK _MMIO(0x1900ec) -#define GEN12_CCS0_CCS1_INTR_MASK _MMIO(0x190100) -#define GEN12_CCS2_CCS3_INTR_MASK _MMIO(0x190104) +#define RENDER_COPY_INTR_ENABLE _MMIO(0x190030) +#define VCS_VECS_INTR_ENABLE _MMIO(0x190034) +#define CCS_RSVD_INTR_ENABLE _MMIO(0x190048) +#define IIR_REG_SELECTOR (x) _MMIO(0x190070 + ((x) * 4)) +#define RCS0_RSVD_INTR_MASK _MMIO(0x190090) +#define BCS_RSVD_INTR_MASK _MMIO(0x1900a0) +#define VCS0_VCS1_INTR_MASK _MMIO(0x1900a8) +#define VCS2_VCS3_INTR_MASK _MMIO(0x1900ac) +#define VECS0_VECS1_INTR_MASK _MMIO(0x1900d0) +#define GUC_SG_INTR_MASK _MMIO(0x1900e8) +#define GPM_WGBOXPERF_INTR_MASK _MMIO(0x1900ec) +#define CCS0_CCS1_INTR_MASK _MMIO(0x190100) +#define CCS2_CCS3_INTR_MASK _MMIO(0x190104)#define XEHPC_BCS1_BCS2_INTR_MASK _MMIO(0x190110)#define XEHPC_BCS3_BCS4_INTR_MASK _MMIO(0x190114)#define XEHPC_BCS5_BCS6_INTR_MASK _MMIO(0x190118)drivers/gpu/drm/xe/regs/xe_regs.h +6
-6@@ -78,13 +78,13 @@#define PCU_IRQ_REGS 0x444e0#define GU_MISC_IRQ_REGS 0x444f0 -#define GEN11_GU_MISC_GSE (1 << 27) +#define GU_MISC_GSE REG_BIT(27) -#define GEN11_GFX_MSTR_IRQ _MMIO(0x190010) -#define GEN11_MASTER_IRQ (1 << 31) -#define GEN11_GU_MISC_IRQ (1 << 29) -#define GEN11_DISPLAY_IRQ (1 << 16) -#define GEN11_GT_DW_IRQ (x) (1 << (x)) +#define GFX_MSTR_IRQ _MMIO(0x190010) +#define MASTER_IRQ REG_BIT(31) +#define GU_MISC_IRQ REG_BIT(29) +#define DISPLAY_IRQ REG_BIT(16) +#define GT_DW_IRQ (x) REG_BIT(x)#define DG1_MSTR_TILE_INTR _MMIO(0x190008)#define DG1_MSTR_IRQ REG_BIT(31)drivers/gpu/drm/xe/xe_guc.c +3
-3@@ -561,12 +561,12 @@ static void guc_enable_irq(struct xe_guc *guc) REG_FIELD_PREP(ENGINE0_MASK, GUC_INTR_GUC2HOST) :REG_FIELD_PREP (ENGINE1_MASK ,GUC_INTR_GUC2HOST ); -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_ENABLE .reg, +xe_mmio_write32 (gt,GUC_SG_INTR_ENABLE .reg,REG_FIELD_PREP (ENGINE1_MASK ,GUC_INTR_GUC2HOST ));if (xe_gt_is_media_type (gt)) -xe_mmio_rmw32 (gt,GEN11_GUC_SG_INTR_MASK .reg, events,0 ); +xe_mmio_rmw32 (gt,GUC_SG_INTR_MASK .reg, events,0 );else -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_MASK .reg, ~events); +xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~events); }int xe_guc_enable_communication (struct xe_guc *guc)drivers/gpu/drm/xe/xe_irq.c +2
-2@@ -72,7 +72,7 @@ static void mask_and_disable(struct xe_gt *gt, u32 irqregs)static u32 gen11_intr_disable (struct xe_gt *gt) { -xe_mmio_write32 (gt,GEN11_GFX_MSTR_IRQ .reg,0 ); +xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg,0 );/* * Now with master disabled, get a sample of level indications @@ -80,7 +80,7 @@ static u32 gen11_intr_disable(struct xe_gt *gt)* New indications can and will light up during processing, * and will generate new interrupt after enabling master. */ -return xe_mmio_read32 (gt,GEN11_GFX_MSTR_IRQ .reg); +return xe_mmio_read32 (gt,GFX_MSTR_IRQ .reg); }static u32
drivers/gpu/drm/xe/xe_irq.c +52
-53@@ -88,7 +88,7 @@ gen11_gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl) {u32 iir; -if (!(master_ctl &GEN11_GU_MISC_IRQ )) +if (!(master_ctl &GU_MISC_IRQ ))return 0 ; iir =xe_mmio_read32 (gt,IIR (GU_MISC_IRQ_REGS ).reg);@@ -100,9 +100,9 @@ gen11_gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl)static inline void gen11_intr_enable (struct xe_gt *gt,bool stall) { -xe_mmio_write32 (gt,GEN11_GFX_MSTR_IRQ .reg,GEN11_MASTER_IRQ ); +xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg,MASTER_IRQ );if (stall) -xe_mmio_read32 (gt,GEN11_GFX_MSTR_IRQ .reg); +xe_mmio_read32 (gt,GFX_MSTR_IRQ .reg); }static void gen11_gt_irq_postinstall (struct xe_device *xe,struct xe_gt *gt)@@ -125,14 +125,14 @@ static void gen11_gt_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) smask = irqs <<16 ;/* Enable RCS, BCS, VCS and VECS class interrupts. */ -xe_mmio_write32 (gt,GEN11_RENDER_COPY_INTR_ENABLE .reg, dmask); -xe_mmio_write32 (gt,GEN11_VCS_VECS_INTR_ENABLE .reg, dmask); +xe_mmio_write32 (gt,RENDER_COPY_INTR_ENABLE .reg, dmask); +xe_mmio_write32 (gt,VCS_VECS_INTR_ENABLE .reg, dmask);if (ccs_mask) -xe_mmio_write32 (gt,GEN12_CCS_RSVD_INTR_ENABLE .reg, smask); +xe_mmio_write32 (gt,CCS_RSVD_INTR_ENABLE .reg, smask);/* Unmask irqs on RCS, BCS, VCS and VECS engines. */ -xe_mmio_write32 (gt,GEN11_RCS0_RSVD_INTR_MASK .reg, ~smask); -xe_mmio_write32 (gt,GEN11_BCS_RSVD_INTR_MASK .reg, ~smask); +xe_mmio_write32 (gt,RCS0_RSVD_INTR_MASK .reg, ~smask); +xe_mmio_write32 (gt,BCS_RSVD_INTR_MASK .reg, ~smask);if (bcs_mask & (BIT (1 )|BIT (2 )))xe_mmio_write32 (gt,XEHPC_BCS1_BCS2_INTR_MASK .reg, ~dmask);if (bcs_mask & (BIT (3 )|BIT (4 )))@@ -141,31 +141,31 @@ static void gen11_gt_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)xe_mmio_write32 (gt,XEHPC_BCS5_BCS6_INTR_MASK .reg, ~dmask);if (bcs_mask & (BIT (7 )|BIT (8 )))xe_mmio_write32 (gt,XEHPC_BCS7_BCS8_INTR_MASK .reg, ~dmask); -xe_mmio_write32 (gt,GEN11_VCS0_VCS1_INTR_MASK .reg, ~dmask); -xe_mmio_write32 (gt,GEN11_VCS2_VCS3_INTR_MASK .reg, ~dmask); +xe_mmio_write32 (gt,VCS0_VCS1_INTR_MASK .reg, ~dmask); +xe_mmio_write32 (gt,VCS2_VCS3_INTR_MASK .reg, ~dmask);//if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5)) -// intel_uncore_write(uncore, GEN12_VCS4_VCS5_INTR_MASK, ~dmask); +// intel_uncore_write(uncore, VCS4_VCS5_INTR_MASK, ~dmask); //if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7)) -// intel_uncore_write(uncore, GEN12_VCS6_VCS7_INTR_MASK, ~dmask); -xe_mmio_write32 (gt,GEN11_VECS0_VECS1_INTR_MASK .reg, ~dmask); +// intel_uncore_write(uncore, VCS6_VCS7_INTR_MASK, ~dmask); +xe_mmio_write32 (gt,VECS0_VECS1_INTR_MASK .reg, ~dmask);//if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3)) -// intel_uncore_write(uncore, GEN12_VECS2_VECS3_INTR_MASK, ~dmask); +// intel_uncore_write(uncore, VECS2_VECS3_INTR_MASK, ~dmask); if (ccs_mask & (BIT (0 )|BIT (1 ))) -xe_mmio_write32 (gt,GEN12_CCS0_CCS1_INTR_MASK .reg, ~dmask); +xe_mmio_write32 (gt,CCS0_CCS1_INTR_MASK .reg, ~dmask);if (ccs_mask & (BIT (2 )|BIT (3 ))) -xe_mmio_write32 (gt,GEN12_CCS2_CCS3_INTR_MASK .reg, ~dmask); +xe_mmio_write32 (gt,CCS2_CCS3_INTR_MASK .reg, ~dmask);/* * RPS interrupts will get enabled/disabled on demand when RPS itself * is enabled/disabled. */ /* TODO: gt->pm_ier, gt->pm_imr */ -xe_mmio_write32 (gt,GEN11_GPM_WGBOXPERF_INTR_ENABLE .reg,0 ); -xe_mmio_write32 (gt,GEN11_GPM_WGBOXPERF_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,GPM_WGBOXPERF_INTR_ENABLE .reg,0 ); +xe_mmio_write32 (gt,GPM_WGBOXPERF_INTR_MASK .reg, ~0 );/* Same thing for GuC interrupts */ -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_ENABLE .reg,0 ); -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,GUC_SG_INTR_ENABLE .reg,0 ); +xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~0 ); }static void gen11_irq_postinstall (struct xe_device *xe,struct xe_gt *gt)@@ -174,7 +174,7 @@ static void gen11_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)gen11_gt_irq_postinstall (xe, gt); -unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GEN11_GU_MISC_GSE ); +unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE );gen11_intr_enable (gt, true); }@@ -190,7 +190,7 @@ gen11_gt_engine_identity(struct xe_device *xe,lockdep_assert_held (&xe->irq.lock); -xe_mmio_write32 (gt,GEN11_IIR_REG_SELECTOR (bank).reg,BIT (bit)); +xe_mmio_write32 (gt,IIR_REG_SELECTOR (bank).reg,BIT (bit));/* * NB: Specs do not specify how long to spin wait, @@ -198,18 +198,17 @@ gen11_gt_engine_identity(struct xe_device *xe,*/ timeout_ts = (local_clock () >>10 ) +100 ;do { - ident =xe_mmio_read32 (gt,GEN11_INTR_IDENTITY_REG (bank).reg); - }while (!(ident &GEN11_INTR_DATA_VALID ) && + ident =xe_mmio_read32 (gt,INTR_IDENTITY_REG (bank).reg); + }while (!(ident &INTR_DATA_VALID ) && !time_after32 (local_clock () >>10 , timeout_ts)); -if (unlikely (!(ident &GEN11_INTR_DATA_VALID ))) { +if (unlikely (!(ident &INTR_DATA_VALID ))) {drm_err (&xe->drm,"INTR_IDENTITY_REG%u:%u 0x%08x not valid!\n" , bank, bit, ident);return 0 ; } -xe_mmio_write32 (gt,GEN11_INTR_IDENTITY_REG (bank).reg, -GEN11_INTR_DATA_VALID ); +xe_mmio_write32 (gt,INTR_IDENTITY_REG (bank).reg,INTR_DATA_VALID );return ident; }@@ -243,24 +242,24 @@ static void gen11_gt_irq_handler(struct xe_device *xe, struct xe_gt *gt,spin_lock (&xe->irq.lock);for (bank =0 ; bank <2 ; bank++) { -if (!(master_ctl &GEN11_GT_DW_IRQ (bank))) +if (!(master_ctl >_DW_IRQ (bank)))continue ;if (!xe_gt_is_media_type (gt)) { intr_dw[bank] = -xe_mmio_read32 (gt,GEN11_GT_INTR_DW (bank).reg); +xe_mmio_read32 (gt,GT_INTR_DW (bank).reg);for_each_set_bit (bit, intr_dw + bank,32 ) identity[bit] =gen11_gt_engine_identity (xe, gt, bank, bit); -xe_mmio_write32 (gt,GEN11_GT_INTR_DW (bank).reg, +xe_mmio_write32 (gt,GT_INTR_DW (bank).reg, intr_dw[bank]); }for_each_set_bit (bit, intr_dw + bank,32 ) { - class =GEN11_INTR_ENGINE_CLASS (identity[bit]); - instance =GEN11_INTR_ENGINE_INSTANCE (identity[bit]); - intr_vec =GEN11_INTR_ENGINE_INTR (identity[bit]); + class =INTR_ENGINE_CLASS (identity[bit]); + instance =INTR_ENGINE_INSTANCE (identity[bit]); + intr_vec =INTR_ENGINE_INTR (identity[bit]);if (class ==XE_ENGINE_CLASS_OTHER ) { gen11_gt_other_irq_handler(gt, instance,@@ -337,7 +336,7 @@ static void dg1_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) {gen11_gt_irq_postinstall (xe, gt); -unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GEN11_GU_MISC_GSE ); +unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE );if (gt->info.id ==XE_GT0 )dg1_intr_enable (xe, true);@@ -365,7 +364,7 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg)continue ;if (!xe_gt_is_media_type (gt)) - master_ctl =xe_mmio_read32 (gt,GEN11_GFX_MSTR_IRQ .reg); + master_ctl =xe_mmio_read32 (gt,GFX_MSTR_IRQ .reg);/* * We might be in irq handler just when PCIe DPC is initiated @@ -379,7 +378,7 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg) }if (!xe_gt_is_media_type (gt)) -xe_mmio_write32 (gt,GEN11_GFX_MSTR_IRQ .reg, master_ctl); +xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg, master_ctl);gen11_gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); }@@ -400,14 +399,14 @@ static void gen11_gt_irq_reset(struct xe_gt *gt)u32 bcs_mask =xe_hw_engine_mask_per_class (gt,XE_ENGINE_CLASS_COPY );/* Disable RCS, BCS, VCS and VECS class engines. */ -xe_mmio_write32 (gt,GEN11_RENDER_COPY_INTR_ENABLE .reg,0 ); -xe_mmio_write32 (gt,GEN11_VCS_VECS_INTR_ENABLE .reg,0 ); +xe_mmio_write32 (gt,RENDER_COPY_INTR_ENABLE .reg,0 ); +xe_mmio_write32 (gt,VCS_VECS_INTR_ENABLE .reg,0 );if (ccs_mask) -xe_mmio_write32 (gt,GEN12_CCS_RSVD_INTR_ENABLE .reg,0 ); +xe_mmio_write32 (gt,CCS_RSVD_INTR_ENABLE .reg,0 );/* Restore masks irqs on RCS, BCS, VCS and VECS engines. */ -xe_mmio_write32 (gt,GEN11_RCS0_RSVD_INTR_MASK .reg, ~0 ); -xe_mmio_write32 (gt,GEN11_BCS_RSVD_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,RCS0_RSVD_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,BCS_RSVD_INTR_MASK .reg, ~0 );if (bcs_mask & (BIT (1 )|BIT (2 )))xe_mmio_write32 (gt,XEHPC_BCS1_BCS2_INTR_MASK .reg, ~0 );if (bcs_mask & (BIT (3 )|BIT (4 )))@@ -416,24 +415,24 @@ static void gen11_gt_irq_reset(struct xe_gt *gt)xe_mmio_write32 (gt,XEHPC_BCS5_BCS6_INTR_MASK .reg, ~0 );if (bcs_mask & (BIT (7 )|BIT (8 )))xe_mmio_write32 (gt,XEHPC_BCS7_BCS8_INTR_MASK .reg, ~0 ); -xe_mmio_write32 (gt,GEN11_VCS0_VCS1_INTR_MASK .reg, ~0 ); -xe_mmio_write32 (gt,GEN11_VCS2_VCS3_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,VCS0_VCS1_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,VCS2_VCS3_INTR_MASK .reg, ~0 );// if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5)) -// xe_mmio_write32(xe, GEN12_VCS4_VCS5_INTR_MASK.reg, ~0); +// xe_mmio_write32(xe, VCS4_VCS5_INTR_MASK.reg, ~0); // if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7)) -// xe_mmio_write32(xe, GEN12_VCS6_VCS7_INTR_MASK.reg, ~0); -xe_mmio_write32 (gt,GEN11_VECS0_VECS1_INTR_MASK .reg, ~0 ); +// xe_mmio_write32(xe, VCS6_VCS7_INTR_MASK.reg, ~0); +xe_mmio_write32 (gt,VECS0_VECS1_INTR_MASK .reg, ~0 );// if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3)) -// xe_mmio_write32(xe, GEN12_VECS2_VECS3_INTR_MASK.reg, ~0); +// xe_mmio_write32(xe, VECS2_VECS3_INTR_MASK.reg, ~0); if (ccs_mask & (BIT (0 )|BIT (1 ))) -xe_mmio_write32 (gt,GEN12_CCS0_CCS1_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,CCS0_CCS1_INTR_MASK .reg, ~0 );if (ccs_mask & (BIT (2 )|BIT (3 ))) -xe_mmio_write32 (gt,GEN12_CCS2_CCS3_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,CCS2_CCS3_INTR_MASK .reg, ~0 ); -xe_mmio_write32 (gt,GEN11_GPM_WGBOXPERF_INTR_ENABLE .reg,0 ); -xe_mmio_write32 (gt,GEN11_GPM_WGBOXPERF_INTR_MASK .reg, ~0 ); -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_ENABLE .reg,0 ); -xe_mmio_write32 (gt,GEN11_GUC_SG_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,GPM_WGBOXPERF_INTR_ENABLE .reg,0 ); +xe_mmio_write32 (gt,GPM_WGBOXPERF_INTR_MASK .reg, ~0 ); +xe_mmio_write32 (gt,GUC_SG_INTR_ENABLE .reg,0 ); +xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~0 ); }static void gen11_irq_reset (struct xe_gt *gt)Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 4/8] drm/xe/irq: Drop unnecessary GEN11_ and GEN12_ register prefixes
Quoted 17 lines · Lucas De Marchi
Quoted 11 lines · Matt Roper
Any interrupt registers that were introduced by platforms i915 considered to be "gen11" or "gen12" are present on all platforms that the Xe driver supports; drop the unnecessary prefixes.
While working in the area, also convert a few open-coded bit manipulations over to
REG_BITandREG_FIELD_GETnotation.Signed-off-by Matt Roper <[email protected]>---
drivers/gpu/drm/xe/regs/xe_gt_regs.h | 42 +++++------ drivers/gpu/drm/xe/regs/xe_regs.h | 12 +--I was thinking more on an approach of cleaning up the entire driver:
get all the defines from regs/* that have the GEN*_ or _GEN* suffix and drop the suffix.
Quoted 8 lines
I wrote it some time ago, but was having some issues with display/ failing to compile because of that (some of the ifdef's inside i915 use our register defines).
Since this is done for irq, with more contained changes, I won't oppose though. It's going in the right direction.
Checked with --color-words and it does what it says
but fails to build:
../drivers/gpu/drm/xe/xe_display.c: In function ‘xe_display_irq_handler’:../drivers/gpu/drm/xe/xe_display.c:278:26: error: ‘GEN11_DISPLAY_IRQ’ undeclared (first use in this function); did you mean ‘DISPLAY_IRQ’?
278 | if (master_ctl & GEN11_DISPLAY_IRQ)
| ^~~~~~~~~~~~~~~~~
| DISPLAY_IRQLucas De Marchi
PATCH 5/8 drm/xe/irq: Rename and clarify top-level interrupt handling routines
In reply to Matt RoperPlatforms supported by the Xe driver handle top-level interrupts in one of two ways:
- Xe_LP platforms only have a "graphics master" register and lack a "master tile" register, so top-level interrupt detection and enable/disable happens in the graphics master.
- Xe_LP+ (aka DG1) and beyond have a "master tile" interrupt register that controls the enable/disable of top-level interrupts and must also be consulted to determine which tiles have received interrupts before the driver moves on the process the graphics master register.
For functions that are only relevant to the first set of platforms, rename the function prefix to Xe_LP since "gen11" doesn't make sense in the Xe driver. Also add some comments briefly describing the two top-level handlers.
--- drivers/gpu/drm/xe/xe_irq.c | 46 +++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 22 deletions(-)
drivers/gpu/drm/xe/xe_irq.c +24 -22
@@ -70,7 +70,7 @@ static void mask_and_disable(struct xe_gt *gt, u32 irqregs)xe_mmio_read32 (gt,IIR (irqregs).reg); } -static u32 gen11_intr_disable (struct xe_gt *gt) +static u32 xelp_intr_disable (struct xe_gt *gt) {xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg,0 );
@@ -98,7 +98,7 @@ gen11_gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl)return iir; } -static inline void gen11_intr_enable (struct xe_gt *gt,bool stall) +static inline void xelp_intr_enable (struct xe_gt *gt,bool stall) {xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg,MASTER_IRQ );if (stall)
@@ -168,7 +168,7 @@ static void gen11_gt_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~0 ); } -static void gen11_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) +static void xelp_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) {/* TODO: PCH */
@@ -176,7 +176,7 @@ static void gen11_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE ); -gen11_intr_enable (gt, true); +xelp_intr_enable (gt, true); } static u32
@@ -278,7 +278,11 @@ static void gen11_gt_irq_handler(struct xe_device *xe, struct xe_gt *gt,spin_unlock (&xe->irq.lock); } -static irqreturn_t gen11_irq_handler (int irq,void *arg) +/* +* Top-level interrupt handler for Xe_LP platforms (which did not have +* a "master tile" interrupt register. +*/ +static irqreturn_t xelp_irq_handler (int irq,void *arg) {struct xe_device *xe = arg;struct xe_gt *gt =xe_device_get_gt (xe,0 );/* Only 1 GT here */
@@ -286,9 +290,9 @@ static irqreturn_t gen11_irq_handler(int irq, void *arg)long unsigned int intr_dw[2 ];u32 identity[32 ]; - master_ctl =gen11_intr_disable (gt); + master_ctl =xelp_intr_disable (gt);if (!master_ctl) { -gen11_intr_enable (gt, false); +xelp_intr_enable (gt, false);return IRQ_NONE ; }
@@ -298,7 +302,7 @@ static irqreturn_t gen11_irq_handler(int irq, void *arg) gu_misc_iir =gen11_gu_misc_irq_ack (gt, master_ctl); -gen11_intr_enable (gt, false); +xelp_intr_enable (gt, false);xe_display_irq_enable (xe, gu_misc_iir);
@@ -342,6 +346,11 @@ static void dg1_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)dg1_intr_enable (xe, true); } +/* +* Top-level interrupt handler for Xe_LP+ and beyond. These platforms have +* a "master tile" interrupt register which must be consulted before the +* "graphics master" interrupt register. +*/ static irqreturn_t dg1_irq_handler (int irq,void *arg) {struct xe_device *xe = arg;
@@ -435,9 +444,9 @@ static void gen11_gt_irq_reset(struct xe_gt *gt)xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~0 ); } -static void gen11_irq_reset (struct xe_gt *gt) +static void xelp_irq_reset (struct xe_gt *gt) { -gen11_intr_disable (gt); +xelp_intr_disable (gt);gen11_gt_irq_reset (gt);
@@ -462,13 +471,10 @@ static void xe_irq_reset(struct xe_device *xe)u8 id;for_each_gt (gt, xe, id) { -if (GRAPHICS_VERx100 (xe) >=1210 ) { +if (GRAPHICS_VERx100 (xe) >=1210 )dg1_irq_reset (gt); - }else if (GRAPHICS_VER (xe) >=11 ) { -gen11_irq_reset (gt); - }else { -drm_err (&xe->drm,"No interrupt reset hook" ); - } +else +xelp_irq_reset (gt); }xe_display_irq_reset (xe);
@@ -480,10 +486,8 @@ void xe_gt_irq_postinstall(struct xe_gt *gt)if (GRAPHICS_VERx100 (xe) >=1210 )dg1_irq_postinstall (xe, gt); -else if (GRAPHICS_VER (xe) >=11 ) -gen11_irq_postinstall (xe, gt);else -drm_err (&xe->drm,"No interrupt postinstall hook" ); +xelp_irq_postinstall (xe, gt);xe_display_irq_postinstall (xe, gt); }
@@ -501,10 +505,8 @@ static irq_handler_t xe_irq_handler(struct xe_device *xe) {if (GRAPHICS_VERx100 (xe) >=1210 ) {return dg1_irq_handler; - }else if (GRAPHICS_VER (xe) >=11 ) { -return gen11_irq_handler; }else { -return NULL ; +return xelp_irq_handler; } }
Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 5/8] drm/xe/irq: Rename and clarify top-level interrupt handling routines
Quoted 148 lines · Matt Roper
Platforms supported by the Xe driver handle top-level interrupts in one of two ways:
-Xe_LPplatforms only have a "graphics master" register and lack a "master tile" register, so top-level interrupt detection and enable/disable happens in the graphics master.
- Xe_LP+ (aka DG1) and beyond have a "master tile" interrupt register that controls the enable/disable of top-level interrupts and must also be consulted to determine which tiles have received interrupts before the driver moves on the process the graphics master register.For functions that are only relevant to the first set of platforms, rename the function prefix to
Xe_LPsince "gen11" doesn't make sense in the Xe driver. Also add some comments briefly describing the two top-level handlers.Signed-off-by Matt Roper <[email protected]>---
drivers/gpu/drm/xe/xe_irq.c| 46 +++++++++++++++++++------------------1 file changed, 24 insertions(+), 22 deletions(-)drivers/gpu/drm/xe/xe_irq.c +4
-4@@ -70,7 +70,7 @@ static void mask_and_disable(struct xe_gt *gt, u32 irqregs)xe_mmio_read32 (gt,IIR (irqregs).reg); } -static u32 gen11_intr_disable (struct xe_gt *gt) +static u32 xelp_intr_disable (struct xe_gt *gt) {xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg,0 );@@ -98,7 +98,7 @@ gen11_gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl)return iir; } -static inline void gen11_intr_enable (struct xe_gt *gt,bool stall) +static inline void xelp_intr_enable (struct xe_gt *gt,bool stall) {xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg,MASTER_IRQ );if (stall)@@ -168,7 +168,7 @@ static void gen11_gt_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~0 ); } -static void gen11_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) +static void xelp_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) {/* TODO: PCH */ @@ -176,7 +176,7 @@ static void gen11_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE ); -gen11_intr_enable (gt, true); +xelp_intr_enable (gt, true); }static u32
drivers/gpu/drm/xe/xe_irq.c +19
-15@@ -278,7 +278,11 @@ static void gen11_gt_irq_handler(struct xe_device *xe, struct xe_gt *gt,spin_unlock (&xe->irq.lock); } -static irqreturn_t gen11_irq_handler (int irq,void *arg) +/* +* Top-level interrupt handler for Xe_LP platforms (which did not have +* a "master tile" interrupt register. +*/ +static irqreturn_t xelp_irq_handler (int irq,void *arg) {struct xe_device *xe = arg;struct xe_gt *gt =xe_device_get_gt (xe,0 );/* Only 1 GT here */ @@ -286,9 +290,9 @@ static irqreturn_t gen11_irq_handler(int irq, void *arg)long unsigned int intr_dw[2 ];u32 identity[32 ]; - master_ctl =gen11_intr_disable (gt); + master_ctl =xelp_intr_disable (gt);if (!master_ctl) { -gen11_intr_enable (gt, false); +xelp_intr_enable (gt, false);return IRQ_NONE ; }@@ -298,7 +302,7 @@ static irqreturn_t gen11_irq_handler(int irq, void *arg) gu_misc_iir =gen11_gu_misc_irq_ack (gt, master_ctl); -gen11_intr_enable (gt, false); +xelp_intr_enable (gt, false);xe_display_irq_enable (xe, gu_misc_iir);@@ -342,6 +346,11 @@ static void dg1_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)dg1_intr_enable (xe, true); } +/* +* Top-level interrupt handler for Xe_LP+ and beyond. These platforms have +* a "master tile" interrupt register which must be consulted before the +* "graphics master" interrupt register. +*/ static irqreturn_t dg1_irq_handler (int irq,void *arg) {struct xe_device *xe = arg;@@ -435,9 +444,9 @@ static void gen11_gt_irq_reset(struct xe_gt *gt)xe_mmio_write32 (gt,GUC_SG_INTR_MASK .reg, ~0 ); } -static void gen11_irq_reset (struct xe_gt *gt) +static void xelp_irq_reset (struct xe_gt *gt) { -gen11_intr_disable (gt); +xelp_intr_disable (gt);gen11_gt_irq_reset (gt);@@ -462,13 +471,10 @@ static void xe_irq_reset(struct xe_device *xe)u8 id;for_each_gt (gt, xe, id) { -if (GRAPHICS_VERx100 (xe) >=1210 ) { +if (GRAPHICS_VERx100 (xe) >=1210 )dg1_irq_reset (gt); - }else if (GRAPHICS_VER (xe) >=11 ) { -gen11_irq_reset (gt); - }else { -drm_err (&xe->drm,"No interrupt reset hook" ); - } +else +xelp_irq_reset (gt); }xe_display_irq_reset (xe);@@ -480,10 +486,8 @@ void xe_gt_irq_postinstall(struct xe_gt *gt)if (GRAPHICS_VERx100 (xe) >=1210 )dg1_irq_postinstall (xe, gt); -else if (GRAPHICS_VER (xe) >=11 ) -gen11_irq_postinstall (xe, gt);else -drm_err (&xe->drm,"No interrupt postinstall hook" ); +xelp_irq_postinstall (xe, gt);xe_display_irq_postinstall (xe, gt); }
drivers/gpu/drm/xe/xe_irq.c static irq_handler_t xe_irq_handler(struct xe_device *xe) · line 509
Quoted 8 lines
drivers/gpu/drm/xe/xe_irq.c +1
-3@@ -501,10 +505,8 @@ static irq_handler_t xe_irq_handler(struct xe_device *xe) {if (GRAPHICS_VERx100 (xe) >=1210 ) {return dg1_irq_handler; - }else if (GRAPHICS_VER (xe) >=11 ) { -return gen11_irq_handler; }else { -return NULL ; +return xelp_irq_handler;
also a great cleanup of dead code since these else branches unreachable.
thanks
Lucas De Marchi
PATCH 6/8 drm/xe/irq: Drop remaining "gen11_" prefix from IRQ functions
In reply to Matt RoperThe remaining "gen11_*" IRQ functions are common to all platforms supported by the Xe driver. Drop the unnecessary prefix.
--- drivers/gpu/drm/xe/xe_irq.c | 46 ++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 24 deletions(-)
drivers/gpu/drm/xe/xe_irq.c +22 -24
@@ -84,7 +84,7 @@ static u32 xelp_intr_disable(struct xe_gt *gt) }static u32 -gen11_gu_misc_irq_ack (struct xe_gt *gt,const u32 master_ctl) +gu_misc_irq_ack (struct xe_gt *gt,const u32 master_ctl) {u32 iir;
@@ -105,7 +105,7 @@ static inline void xelp_intr_enable(struct xe_gt *gt, bool stall)xe_mmio_read32 (gt,GFX_MSTR_IRQ .reg); } -static void gen11_gt_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) +static void gt_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) {u32 irqs, dmask, smask;u32 ccs_mask =xe_hw_engine_mask_per_class (gt,XE_ENGINE_CLASS_COMPUTE );
@@ -172,7 +172,7 @@ static void xelp_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) {/* TODO: PCH */ -gen11_gt_irq_postinstall (xe, gt); +gt_irq_postinstall (xe, gt);unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE );
@@ -180,10 +180,10 @@ static void xelp_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) }static u32 -gen11_gt_engine_identity (struct xe_device *xe, -struct xe_gt *gt, -const unsigned int bank, -const unsigned int bit) +gt_engine_identity (struct xe_device *xe, +struct xe_gt *gt, +const unsigned int bank, +const unsigned int bit) {u32 timeout_ts;u32 ident;
@@ -216,7 +216,7 @@ gen11_gt_engine_identity(struct xe_device *xe,#define OTHER_MEDIA_GUC_INSTANCE 16static void -gen11_gt_other_irq_handler (struct xe_gt *gt,const u8 instance,const u16 iir) +gt_other_irq_handler (struct xe_gt *gt,const u8 instance,const u16 iir) {if (instance ==OTHER_GUC_INSTANCE && !xe_gt_is_media_type (gt))return xe_guc_irq_handler (>->uc.guc, iir);
@@ -230,9 +230,9 @@ gen11_gt_other_irq_handler(struct xe_gt *gt, const u8 instance, const u16 iir) } } -static void gen11_gt_irq_handler (struct xe_device *xe,struct xe_gt *gt, -u32 master_ctl,long unsigned int *intr_dw, -u32 *identity) +static void gt_irq_handler (struct xe_device *xe,struct xe_gt *gt, +u32 master_ctl,long unsigned int *intr_dw, +u32 *identity) {unsigned int bank, bit;u16 instance, intr_vec;
@@ -249,9 +249,8 @@ static void gen11_gt_irq_handler(struct xe_device *xe, struct xe_gt *gt, intr_dw[bank] =xe_mmio_read32 (gt,GT_INTR_DW (bank).reg);for_each_set_bit (bit, intr_dw + bank,32 ) - identity[bit] =gen11_gt_engine_identity (xe, gt, - bank, - bit); + identity[bit] =gt_engine_identity (xe, gt, + bank, bit);xe_mmio_write32 (gt,GT_INTR_DW (bank).reg, intr_dw[bank]); }
@@ -262,8 +261,7 @@ static void gen11_gt_irq_handler(struct xe_device *xe, struct xe_gt *gt, intr_vec =INTR_ENGINE_INTR (identity[bit]);if (class ==XE_ENGINE_CLASS_OTHER ) { -gen11_gt_other_irq_handler (gt, instance, - intr_vec); +gt_other_irq_handler (gt, instance, intr_vec);continue ; }
@@ -296,11 +294,11 @@ static irqreturn_t xelp_irq_handler(int irq, void *arg)return IRQ_NONE ; } -gen11_gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); +gt_irq_handler (xe, gt, master_ctl, intr_dw, identity);xe_display_irq_handler (xe, master_ctl); - gu_misc_iir =gen11_gu_misc_irq_ack (gt, master_ctl); + gu_misc_iir =gu_misc_irq_ack (gt, master_ctl);xelp_intr_enable (gt, false);
@@ -338,7 +336,7 @@ static void dg1_intr_enable(struct xe_device *xe, bool stall)static void dg1_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) { -gen11_gt_irq_postinstall (xe, gt); +gt_irq_postinstall (xe, gt);unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE );
@@ -388,12 +386,12 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg)if (!xe_gt_is_media_type (gt))xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg, master_ctl); -gen11_gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); +gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); }xe_display_irq_handler (xe, master_ctl); - gu_misc_iir =gen11_gu_misc_irq_ack (gt, master_ctl); + gu_misc_iir =gu_misc_irq_ack (gt, master_ctl);dg1_intr_enable (xe, false);
@@ -402,7 +400,7 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg)return IRQ_HANDLED ; } -static void gen11_gt_irq_reset (struct xe_gt *gt) +static void gt_irq_reset (struct xe_gt *gt) {u32 ccs_mask =xe_hw_engine_mask_per_class (gt,XE_ENGINE_CLASS_COMPUTE );u32 bcs_mask =xe_hw_engine_mask_per_class (gt,XE_ENGINE_CLASS_COPY );
@@ -448,7 +446,7 @@ static void xelp_irq_reset(struct xe_gt *gt) {xelp_intr_disable (gt); -gen11_gt_irq_reset (gt); +gt_irq_reset (gt);mask_and_disable (gt,GU_MISC_IRQ_REGS );mask_and_disable (gt,PCU_IRQ_REGS );
@@ -459,7 +457,7 @@ static void dg1_irq_reset(struct xe_gt *gt)if (gt->info.id ==0 )dg1_intr_disable (gt_to_xe (gt)); -gen11_gt_irq_reset (gt); +gt_irq_reset (gt);mask_and_disable (gt,GU_MISC_IRQ_REGS );mask_and_disable (gt,PCU_IRQ_REGS );
Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 6/8] drm/xe/irq: Drop remaining "gen11_" prefix from IRQ functions
Quoted 4 lines · Matt Roper
The remaining "gen11_*" IRQ functions are common to all platforms supported by the Xe driver. Drop the unnecessary prefix.
Signed-off-by Matt Roper <[email protected]>
Lucas De Marchi
Quoted 162 lines
---
drivers/gpu/drm/xe/xe_irq.c| 46 ++++++++++++++++++-------------------1 file changed, 22 insertions(+), 24 deletions(-)drivers/gpu/drm/xe/xe_irq.c +0
-0@@ -84,7 +84,7 @@ static u32 xelp_intr_disable(struct xe_gt *gt) }static u32
drivers/gpu/drm/xe/xe_irq.c +1
-1-gen11_gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl) +gu_misc_irq_ack(struct xe_gt *gt, const u32 master_ctl){ u32 iir;drivers/gpu/drm/xe/xe_irq.c +2
-2@@ -105,7 +105,7 @@ static inline void xelp_intr_enable(struct xe_gt *gt, bool stall)xe_mmio_read32 (gt,GFX_MSTR_IRQ .reg); } -static void gen11_gt_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) +static void gt_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) {u32 irqs, dmask, smask;u32 ccs_mask =xe_hw_engine_mask_per_class (gt,XE_ENGINE_CLASS_COMPUTE );@@ -172,7 +172,7 @@ static void xelp_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) {/* TODO: PCH */ -gen11_gt_irq_postinstall (xe, gt); +gt_irq_postinstall (xe, gt);unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE );@@ -180,10 +180,10 @@ static void xelp_irq_postinstall(struct xe_device *xe, struct xe_gt *gt) }static u32
drivers/gpu/drm/xe/xe_irq.c +4
-4-gen11_gt_engine_identity(struct xe_device *xe, - struct xe_gt *gt, - const unsigned int bank, - const unsigned int bit) +gt_engine_identity(struct xe_device *xe, + struct xe_gt *gt, + const unsigned int bank, + const unsigned int bit){ u32 timeout_ts; u32 ident;drivers/gpu/drm/xe/xe_irq.c +0
-0@@ -216,7 +216,7 @@ gen11_gt_engine_identity(struct xe_device *xe,#define OTHER_MEDIA_GUC_INSTANCE 16static void
drivers/gpu/drm/xe/xe_irq.c +1
-1-gen11_gt_other_irq_handler(struct xe_gt *gt, const u8 instance, const u16 iir) +gt_other_irq_handler(struct xe_gt *gt, const u8 instance, const u16 iir){ if (instance == OTHER_GUC_INSTANCE && !xe_gt_is_media_type(gt)) return xe_guc_irq_handler(>->uc.guc, iir);drivers/gpu/drm/xe/xe_irq.c +14
-16@@ -230,9 +230,9 @@ gen11_gt_other_irq_handler(struct xe_gt *gt, const u8 instance, const u16 iir) } } -static void gen11_gt_irq_handler (struct xe_device *xe,struct xe_gt *gt, -u32 master_ctl,long unsigned int *intr_dw, -u32 *identity) +static void gt_irq_handler (struct xe_device *xe,struct xe_gt *gt, +u32 master_ctl,long unsigned int *intr_dw, +u32 *identity) {unsigned int bank, bit;u16 instance, intr_vec;@@ -249,9 +249,8 @@ static void gen11_gt_irq_handler(struct xe_device *xe, struct xe_gt *gt, intr_dw[bank] =xe_mmio_read32 (gt,GT_INTR_DW (bank).reg);for_each_set_bit (bit, intr_dw + bank,32 ) - identity[bit] =gen11_gt_engine_identity (xe, gt, - bank, - bit); + identity[bit] =gt_engine_identity (xe, gt, + bank, bit);xe_mmio_write32 (gt,GT_INTR_DW (bank).reg, intr_dw[bank]); }@@ -262,8 +261,7 @@ static void gen11_gt_irq_handler(struct xe_device *xe, struct xe_gt *gt, intr_vec =INTR_ENGINE_INTR (identity[bit]);if (class ==XE_ENGINE_CLASS_OTHER ) { -gen11_gt_other_irq_handler (gt, instance, - intr_vec); +gt_other_irq_handler (gt, instance, intr_vec);continue ; }@@ -296,11 +294,11 @@ static irqreturn_t xelp_irq_handler(int irq, void *arg)return IRQ_NONE ; } -gen11_gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); +gt_irq_handler (xe, gt, master_ctl, intr_dw, identity);xe_display_irq_handler (xe, master_ctl); - gu_misc_iir =gen11_gu_misc_irq_ack (gt, master_ctl); + gu_misc_iir =gu_misc_irq_ack (gt, master_ctl);xelp_intr_enable (gt, false);@@ -338,7 +336,7 @@ static void dg1_intr_enable(struct xe_device *xe, bool stall)static void dg1_irq_postinstall (struct xe_device *xe,struct xe_gt *gt) { -gen11_gt_irq_postinstall (xe, gt); +gt_irq_postinstall (xe, gt);unmask_and_enable (gt,GU_MISC_IRQ_REGS ,GU_MISC_GSE );@@ -388,12 +386,12 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg)if (!xe_gt_is_media_type (gt))xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg, master_ctl); -gen11_gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); +gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); }xe_display_irq_handler (xe, master_ctl); - gu_misc_iir =gen11_gu_misc_irq_ack (gt, master_ctl); + gu_misc_iir =gu_misc_irq_ack (gt, master_ctl);dg1_intr_enable (xe, false);@@ -402,7 +400,7 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg)return IRQ_HANDLED ; } -static void gen11_gt_irq_reset (struct xe_gt *gt) +static void gt_irq_reset (struct xe_gt *gt) {u32 ccs_mask =xe_hw_engine_mask_per_class (gt,XE_ENGINE_CLASS_COMPUTE );u32 bcs_mask =xe_hw_engine_mask_per_class (gt,XE_ENGINE_CLASS_COPY );@@ -448,7 +446,7 @@ static void xelp_irq_reset(struct xe_gt *gt) {xelp_intr_disable (gt); -gen11_gt_irq_reset (gt); +gt_irq_reset (gt);mask_and_disable (gt,GU_MISC_IRQ_REGS );mask_and_disable (gt,PCU_IRQ_REGS );@@ -459,7 +457,7 @@ static void dg1_irq_reset(struct xe_gt *gt)if (gt->info.id ==0 )dg1_intr_disable (gt_to_xe (gt)); -gen11_gt_irq_reset (gt); +gt_irq_reset (gt);mask_and_disable (gt,GU_MISC_IRQ_REGS );mask_and_disable (gt,PCU_IRQ_REGS );Signature · 1 line
2.39.2
PATCH 7/8 drm/xe/irq: Drop commented-out code for non-existent media engines
In reply to Matt RoperAlthough the hardware team has set aside some register bits for extra media engines, no platform supported by the Xe driver today has VCS4-7 or VECS2-3. Drop the corresponding code (which was already commented out); we can bring it back easily enough if such engines show up on a future platform.
--- drivers/gpu/drm/xe/xe_irq.c | 12 ------------ 1 file changed, 12 deletions(-)
drivers/gpu/drm/xe/xe_irq.c +0 -12
@@ -143,13 +143,7 @@ static void gt_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)xe_mmio_write32 (gt,XEHPC_BCS7_BCS8_INTR_MASK .reg, ~dmask);xe_mmio_write32 (gt,VCS0_VCS1_INTR_MASK .reg, ~dmask);xe_mmio_write32 (gt,VCS2_VCS3_INTR_MASK .reg, ~dmask); -//if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5)) -// intel_uncore_write(uncore, VCS4_VCS5_INTR_MASK, ~dmask); -//if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7)) -// intel_uncore_write(uncore, VCS6_VCS7_INTR_MASK, ~dmask); xe_mmio_write32 (gt,VECS0_VECS1_INTR_MASK .reg, ~dmask); -//if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3)) -// intel_uncore_write(uncore, VECS2_VECS3_INTR_MASK, ~dmask); if (ccs_mask & (BIT (0 )|BIT (1 )))xe_mmio_write32 (gt,CCS0_CCS1_INTR_MASK .reg, ~dmask);if (ccs_mask & (BIT (2 )|BIT (3 )))
@@ -424,13 +418,7 @@ static void gt_irq_reset(struct xe_gt *gt)xe_mmio_write32 (gt,XEHPC_BCS7_BCS8_INTR_MASK .reg, ~0 );xe_mmio_write32 (gt,VCS0_VCS1_INTR_MASK .reg, ~0 );xe_mmio_write32 (gt,VCS2_VCS3_INTR_MASK .reg, ~0 ); -// if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5)) -// xe_mmio_write32(xe, VCS4_VCS5_INTR_MASK.reg, ~0); -// if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7)) -// xe_mmio_write32(xe, VCS6_VCS7_INTR_MASK.reg, ~0); xe_mmio_write32 (gt,VECS0_VECS1_INTR_MASK .reg, ~0 ); -// if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3)) -// xe_mmio_write32(xe, VECS2_VECS3_INTR_MASK.reg, ~0); if (ccs_mask & (BIT (0 )|BIT (1 )))xe_mmio_write32 (gt,CCS0_CCS1_INTR_MASK .reg, ~0 );if (ccs_mask & (BIT (2 )|BIT (3 )))
Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 7/8] drm/xe/irq: Drop commented-out code for non-existent media engines
Quoted 7 lines · Matt Roper
Although the hardware team has set aside some register bits for extra media engines, no platform supported by the Xe driver today has VCS4-7 or VECS2-3. Drop the corresponding code (which was already commented out); we can bring it back easily enough if such engines show up on a future platform.
Signed-off-by Matt Roper <[email protected]>
Lucas De Marchi
Quoted 39 lines
---
drivers/gpu/drm/xe/xe_irq.c| 12 ------------1 file changed, 12 deletions(-)drivers/gpu/drm/xe/xe_irq.c +0
-12@@ -143,13 +143,7 @@ static void gt_irq_postinstall(struct xe_device *xe, struct xe_gt *gt)xe_mmio_write32 (gt,XEHPC_BCS7_BCS8_INTR_MASK .reg, ~dmask);xe_mmio_write32 (gt,VCS0_VCS1_INTR_MASK .reg, ~dmask);xe_mmio_write32 (gt,VCS2_VCS3_INTR_MASK .reg, ~dmask); -//if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5)) -// intel_uncore_write(uncore, VCS4_VCS5_INTR_MASK, ~dmask); -//if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7)) -// intel_uncore_write(uncore, VCS6_VCS7_INTR_MASK, ~dmask); xe_mmio_write32 (gt,VECS0_VECS1_INTR_MASK .reg, ~dmask); -//if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3)) -// intel_uncore_write(uncore, VECS2_VECS3_INTR_MASK, ~dmask); if (ccs_mask & (BIT (0 )|BIT (1 )))xe_mmio_write32 (gt,CCS0_CCS1_INTR_MASK .reg, ~dmask);if (ccs_mask & (BIT (2 )|BIT (3 )))@@ -424,13 +418,7 @@ static void gt_irq_reset(struct xe_gt *gt)xe_mmio_write32 (gt,XEHPC_BCS7_BCS8_INTR_MASK .reg, ~0 );xe_mmio_write32 (gt,VCS0_VCS1_INTR_MASK .reg, ~0 );xe_mmio_write32 (gt,VCS2_VCS3_INTR_MASK .reg, ~0 ); -// if (HAS_ENGINE(gt, VCS4) || HAS_ENGINE(gt, VCS5)) -// xe_mmio_write32(xe, VCS4_VCS5_INTR_MASK.reg, ~0); -// if (HAS_ENGINE(gt, VCS6) || HAS_ENGINE(gt, VCS7)) -// xe_mmio_write32(xe, VCS6_VCS7_INTR_MASK.reg, ~0); xe_mmio_write32 (gt,VECS0_VECS1_INTR_MASK .reg, ~0 ); -// if (HAS_ENGINE(gt, VECS2) || HAS_ENGINE(gt, VECS3)) -// xe_mmio_write32(xe, VECS2_VECS3_INTR_MASK.reg, ~0); if (ccs_mask & (BIT (0 )|BIT (1 )))xe_mmio_write32 (gt,CCS0_CCS1_INTR_MASK .reg, ~0 );if (ccs_mask & (BIT (2 )|BIT (3 )))Signature · 1 line
2.39.2
PATCH 8/8 drm/xe/irq: Don't clobber display interrupts on multi-tile platforms
In reply to Matt RoperAlthough our only multi-tile platform today (PVC) doesn't support display, it's possible that some future multi-tile platform will. If/when this happens, display interrupts (both traditional display and ASLE backlight interrupts raised as a Gunit interrupt) should be delivered to the primary tile. Save away tile0's master_ctl value so that it can still be used for display interrupt handling after the GT loop.
--- drivers/gpu/drm/xe/xe_irq.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/gpu/drm/xe/xe_irq.c +11 -3
@@ -347,7 +347,7 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg) {struct xe_device *xe = arg;struct xe_gt *gt; -u32 master_tile_ctl, master_ctl =0 , gu_misc_iir; +u32 master_tile_ctl, master_ctl =0 , tile0_master_ctl =0 , gu_misc_iir;long unsigned int intr_dw[2 ];u32 identity[32 ];u8 id;
@@ -381,11 +381,19 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg)if (!xe_gt_is_media_type (gt))xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg, master_ctl);gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); + +/* +* Save primary tile's master interrupt register for display +* processing below. +*/ +if (id ==0 ) + tile0_master_ctl = master_ctl; } -xe_display_irq_handler (xe, master_ctl); +xe_display_irq_handler (xe, tile0_master_ctl); - gu_misc_iir =gu_misc_irq_ack (gt, master_ctl); +/* Gunit GSE interrupts can trigger display backlight operations */ + gu_misc_iir =gu_misc_irq_ack (gt, tile0_master_ctl);dg1_intr_enable (xe, false);
Signature · 1 line
2.39.2
Re: [Intel-xe] [PATCH 8/8] drm/xe/irq: Don't clobber display interrupts on multi-tile platforms
Quoted 9 lines · Matt Roper
Although our only multi-tile platform today (PVC) doesn't support display, it's possible that some future multi-tile platform will. If/when this happens, display interrupts (both traditional display and ASLE backlight interrupts raised as a Gunit interrupt) should be delivered to the primary tile. Save away tile0's
master_ctlvalue so that it can still be used for display interrupt handling after the GT loop.Signed-off-by Matt Roper <[email protected]>
Lucas De Marchi
Quoted 42 lines
---
drivers/gpu/drm/xe/xe_irq.c| 14 +++++++++++---1 file changed, 11 insertions(+), 3 deletions(-)drivers/gpu/drm/xe/xe_irq.c +11
-3@@ -347,7 +347,7 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg) {struct xe_device *xe = arg;struct xe_gt *gt; -u32 master_tile_ctl, master_ctl =0 , gu_misc_iir; +u32 master_tile_ctl, master_ctl =0 , tile0_master_ctl =0 , gu_misc_iir;long unsigned int intr_dw[2 ];u32 identity[32 ];u8 id;@@ -381,11 +381,19 @@ static irqreturn_t dg1_irq_handler(int irq, void *arg)if (!xe_gt_is_media_type (gt))xe_mmio_write32 (gt,GFX_MSTR_IRQ .reg, master_ctl);gt_irq_handler (xe, gt, master_ctl, intr_dw, identity); + +/* +* Save primary tile's master interrupt register for display +* processing below. +*/ +if (id ==0 ) + tile0_master_ctl = master_ctl; } -xe_display_irq_handler (xe, master_ctl); +xe_display_irq_handler (xe, tile0_master_ctl); - gu_misc_iir =gu_misc_irq_ack (gt, master_ctl); +/* Gunit GSE interrupts can trigger display backlight operations */ + gu_misc_iir =gu_misc_irq_ack (gt, tile0_master_ctl);dg1_intr_enable (xe, false);Signature · 1 line
2.39.2
Patchwork
CI[Intel-xe] ✓ CI.Patch_applied: success for Interrupt cleanup and future-proofing
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: Interrupt cleanup and future-proofing
URL : https://patchwork.freedesktop.org/series/115884/
State : success
== Summary ==
=== Applying kernel patches on branch 'drm-xe-next' with base: === commit 5de0375b04455c7c8e516f53715eedde50f5ae45
Author: Maarten Lankhorst <[email protected]> AuthorDate: Thu Mar 23 15:05:18 2023 +0100 Commit: Maarten Lankhorst <[email protected]> CommitDate: Wed Mar 29 11:24:42 2023 +0200
drm/xe: Display api changes update
=== git am output follows ===
Applying: drm/xe/irq: Drop gen3_ prefixes
Applying: drm/xe/irq: Add helpers to find ISR/IIR/IMR/IER registers
Applying: drm/xe/irq: Drop IRQ_INIT and IRQ_RESET macros
Applying: drm/xe/irq: Drop unnecessary GEN11_ and GEN12_ register prefixes
Applying: drm/xe/irq: Rename and clarify top-level interrupt handling routines
Applying: drm/xe/irq: Drop remaining "gen11_" prefix from IRQ functions
Applying: drm/xe/irq: Drop commented-out code for non-existent media engines
Applying: drm/xe/irq: Don't clobber display interrupts on multi-tile platforms
Patchwork
CI[Intel-xe] ✗ CI.KUnit: failure for Interrupt cleanup and future-proofing
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: Interrupt cleanup and future-proofing
URL : https://patchwork.freedesktop.org/series/115884/
State : failure
== Summary ==
+ trap cleanup EXIT
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/xe/.kunitconfig ERROR:root:In file included from /usr/include/stdlib.h:1013,
from ../arch/um/drivers/chan_user.c:6:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/um/os-Linux/helper.c:6:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/um/os-Linux/execvp.c:24:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/um/drivers/fd.c:7:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/um/os-Linux/irq.c:8:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/um/os-Linux/mem.c:8:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/um/os-Linux/main.c:8:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/um/os-Linux/file.c:8:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^
In file included from /usr/include/stdlib.h:1013,
from ../arch/x86/um/os-Linux/registers.c:8:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^make[3]: *** [../scripts/Makefile.build:252: arch/um/os-Linux/execvp.o] Error 1 make[3]: *** Waiting for unfinished jobs....
make[3]: *** [../scripts/Makefile.build:252: arch/um/os-Linux/irq.o] Error 1 make[3]: *** [../scripts/Makefile.build:252: arch/um/drivers/fd.o] Error 1 make[3]: *** Waiting for unfinished jobs....
make[4]: *** [../scripts/Makefile.build:252: arch/x86/um/os-Linux/registers.o] Error 1 make[4]: *** Waiting for unfinished jobs....
make[3]: *** [../scripts/Makefile.build:252: arch/um/drivers/chan_user.o] Error 1 In file included from /usr/include/stdlib.h:1013,
from ../arch/x86/um/os-Linux/task_size.c:3:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^make[3]: *** [../scripts/Makefile.build:252: arch/um/os-Linux/helper.o] Error 1 make[3]: *** [../scripts/Makefile.build:252: arch/um/os-Linux/main.o] Error 1 make[3]: *** [../scripts/Makefile.build:252: arch/um/os-Linux/mem.o] Error 1 make[4]: *** [../scripts/Makefile.build:252: arch/x86/um/os-Linux/task_size.o] Error 1 make[3]: *** [../scripts/Makefile.build:494: arch/x86/um/os-Linux] Error 2 make[3]: *** Waiting for unfinished jobs....
make[3]: *** [../scripts/Makefile.build:252: arch/um/os-Linux/file.o] Error 1 In file included from /usr/include/stdlib.h:1013,
from ../arch/um/os-Linux/skas/process.c:7:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^make[4]: *** [../scripts/Makefile.build:252: arch/um/os-Linux/skas/process.o] Error 1 make[3]: *** [../scripts/Makefile.build:494: arch/um/os-Linux/skas] Error 2
make[2]: *** [../scripts/Makefile.build:494: arch/um/os-Linux] Error 2
make[2]: *** Waiting for unfinished jobs....
make[2]: *** [../scripts/Makefile.build:494: arch/x86/um] Error 2
make[2]: *** [../scripts/Makefile.build:494: arch/um/drivers] Error 2
In file included from /usr/include/stdlib.h:1013,
from arch/um/kernel/config.c:7:/usr/include/x86_64-linux-gnu/bits/stdlib-float.h: In function ‘atof’:/usr/include/x86_64-linux-gnu/bits/stdlib-float.h:26:1: error: SSE register return with SSE disabled
26 | {
| ^make[3]: *** [../scripts/Makefile.build:252: arch/um/kernel/config.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [../scripts/Makefile.build:494: arch/um/kernel] Error 2../drivers/gpu/drm/xe/xe_display.c: In function ‘xe_display_irq_handler’:../drivers/gpu/drm/xe/xe_display.c:278:19: error: ‘GEN11_DISPLAY_IRQ’ undeclared (first use in this function); did you mean ‘DISPLAY_IRQ’?
278 | if (master_ctl & GEN11_DISPLAY_IRQ)
| ^~~~~~~~~~~~~~~~~
| DISPLAY_IRQ
../drivers/gpu/drm/xe/xe_display.c:278:19: note: each undeclared identifier is reported only once for each function it appears in
../drivers/gpu/drm/xe/xe_display.c: In function ‘xe_display_irq_enable’:
../drivers/gpu/drm/xe/xe_display.c:287:20: error: ‘GEN11_GU_MISC_GSE’ undeclared (first use in this function); did you mean ‘GU_MISC_GSE’?
287 | if (gu_misc_iir & GEN11_GU_MISC_GSE)
| ^~~~~~~~~~~~~~~~~
| GU_MISC_GSEmake[6]: *** [../scripts/Makefile.build:252: drivers/gpu/drm/xe/xe_display.o] Error 1 make[6]: *** Waiting for unfinished jobs....
make[5]: *** [../scripts/Makefile.build:494: drivers/gpu/drm/xe] Error 2 make[4]: *** [../scripts/Makefile.build:494: drivers/gpu/drm] Error 2 make[3]: *** [../scripts/Makefile.build:494: drivers/gpu] Error 2 make[2]: *** [../scripts/Makefile.build:494: drivers] Error 2
make[1]: *** [/kernel/Makefile:2025: .] Error 2
make: *** [Makefile:226: __sub-make] Error 2
[18:26:31] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig [18:26:35] Building KUnit Kernel ... Populating config with: $ make ARCH=um O=.kunit olddefconfig Building with: $ make ARCH=um O=.kunit --jobs=48 + cleanup ++ stat -c %u:%g /kernel + chown -R 1003:1003 /kernel