ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders (#209)
Subsystems (2)
PATCH v2 1/1 ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders (#209)
Since three systems have at least some of the FSI tree in common, reorganize the FSI tree into include files. In addition, add the I2C responders and associated engines to Everest.
Signed-off-by Eddie James <[email protected]>
--- arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts | 364 +--- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 1683 ++++++++++-------- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 678 +------ arch/arm/boot/dts/ibm-power10-dual.dtsi | 380 ++++ arch/arm/boot/dts/ibm-power10-quad.dtsi | 1305 ++++++++++++++ 5 files changed, 2705 insertions(+), 1705 deletions(-) create mode 100644 arch/arm/boot/dts/ibm-power10-dual.dtsi create mode 100644 arch/arm/boot/dts/ibm-power10-quad.dtsi
arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts +30 -334
@@ -12,38 +12,11 @@ / { compatible = "ibm,bonnell-bmc", "aspeed,ast2600"; aliases { - i2c100 = &cfam0_i2c0; - i2c101 = &cfam0_i2c1; - i2c110 = &cfam0_i2c10; - i2c111 = &cfam0_i2c11; - i2c112 = &cfam0_i2c12; - i2c113 = &cfam0_i2c13; - i2c114 = &cfam0_i2c14; - i2c115 = &cfam0_i2c15; - i2c202 = &cfam1_i2c2; - i2c203 = &cfam1_i2c3; - i2c210 = &cfam1_i2c10; - i2c211 = &cfam1_i2c11; - i2c214 = &cfam1_i2c14; - i2c215 = &cfam1_i2c15; - i2c216 = &cfam1_i2c16; - i2c217 = &cfam1_i2c17; - serial4 = &uart5; i2c16 = &i2c11mux0chn0; i2c17 = &i2c11mux0chn1; i2c18 = &i2c11mux0chn2; i2c19 = &i2c11mux0chn3; - - spi10 = &cfam0_spi0; - spi11 = &cfam0_spi1; - spi12 = &cfam0_spi2; - spi13 = &cfam0_spi3; - spi20 = &cfam1_spi0; - spi21 = &cfam1_spi1; - spi22 = &cfam1_spi2; - spi23 = &cfam1_spi3; - }; chosen {
@@ -197,313 +170,6 @@ &emmc { clk-phase-mmc-hs200 = <180>, <180>; }; -&fsim0 { - status = "okay"; - - #address-cells = <2>; - #size-cells = <0>; - - cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom@1000 { - compatible = "ibm,fsi2pib"; - reg = <0x1000 0x400>; - }; - - i2c@1800 { - compatible = "ibm,fsi-i2c-master"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam0_i2c0: i2c-bus@0 { - reg = <0>; /* OMI01 */ - }; - - cfam0_i2c1: i2c-bus@1 { - reg = <1>; /* OMI23 */ - }; - - cfam0_i2c10: i2c-bus@a { - reg = <10>; /* OP3A */ - }; - - cfam0_i2c11: i2c-bus@b { - reg = <11>; /* OP3B */ - }; - - cfam0_i2c12: i2c-bus@c { - reg = <12>; /* OP4A */ - }; - - cfam0_i2c13: i2c-bus@d { - reg = <13>; /* OP4B */ - }; - - cfam0_i2c14: i2c-bus@e { - reg = <14>; /* OP5A */ - }; - - cfam0_i2c15: i2c-bus@f { - reg = <15>; /* OP5B */ - }; - }; - - fsi2spi@1c00 { - compatible = "ibm,fsi2spi"; - reg = <0x1c00 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam0_spi0: spi@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - - cfam0_spi1: spi@20 { - reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - - cfam0_spi2: spi@40 { - reg = <0x40>; - compatible = "ibm,fsi2spi-restricted"; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - - cfam0_spi3: spi@60 { - reg = <0x60>; - compatible = "ibm,fsi2spi-restricted"; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - }; - - sbefifo@2400 { - compatible = "ibm,p9-sbefifo"; - reg = <0x2400 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - fsi_occ0: occ { - compatible = "ibm,p10-occ"; - - occ-hwmon { - compatible = "ibm,p10-occ-hwmon"; - ibm,no-poll-on-init; - }; - }; - }; - - fsi_hub0: hub@3400 { - compatible = "fsi-master-hub"; - reg = <0x3400 0x400>; - #address-cells = <2>; - #size-cells = <0>; - }; - }; -}; - -&fsi_hub0 { - cfam@1,0 { - reg = <1 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <1>; - - scom@1000 { - compatible = "ibm,fsi2pib"; - reg = <0x1000 0x400>; - }; - - i2c@1800 { - compatible = "ibm,fsi-i2c-master"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam1_i2c2: i2c-bus@2 { - reg = <2>; /* OMI45 */ - }; - - cfam1_i2c3: i2c-bus@3 { - reg = <3>; /* OMI67 */ - }; - - cfam1_i2c10: i2c-bus@a { - reg = <10>; /* OP3A */ - }; - - cfam1_i2c11: i2c-bus@b { - reg = <11>; /* OP3B */ - }; - - cfam1_i2c14: i2c-bus@e { - reg = <14>; /* OP5A */ - }; - - cfam1_i2c15: i2c-bus@f { - reg = <15>; /* OP5B */ - }; - - cfam1_i2c16: i2c-bus@10 { - reg = <16>; /* OP6A */ - }; - - cfam1_i2c17: i2c-bus@11 { - reg = <17>; /* OP6B */ - }; - }; - - fsi2spi@1c00 { - compatible = "ibm,fsi2spi"; - reg = <0x1c00 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam1_spi0: spi@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - - cfam1_spi1: spi@20 { - reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - - cfam1_spi2: spi@40 { - reg = <0x40>; - compatible = "ibm,fsi2spi-restricted"; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - - cfam1_spi3: spi@60 { - reg = <0x60>; - compatible = "ibm,fsi2spi-restricted"; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - at25,byte-len = <0x80000>; - at25,addr-mode = <4>; - at25,page-size = <256>; - - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - }; - - sbefifo@2400 { - compatible = "ibm,p9-sbefifo"; - reg = <0x2400 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - fsi_occ1: occ { - compatible = "ibm,p10-occ"; - - occ-hwmon { - compatible = "ibm,p10-occ-hwmon"; - ibm,no-poll-on-init; - }; - }; - }; - - fsi_hub1: hub@3400 { - compatible = "fsi-master-hub"; - reg = <0x3400 0x400>; - #address-cells = <2>; - #size-cells = <0>; - - no-scan-on-init; - }; - }; -}; - &ibt { status = "okay"; };
@@ -913,3 +579,33 @@ &kcs3 { aspeed,lpc-io-reg = <0xca2>; aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; + +#include "ibm-power10-dual.dtsi" + +&cfam0_i2c10 { + eeprom@50 { + compatible = "atmel,at30tse004a"; + reg = <0x50>; + }; +}; + +&cfam0_i2c11 { + eeprom@50 { + compatible = "atmel,at30tse004a"; + reg = <0x50>; + }; +}; + +&cfam0_i2c12 { + eeprom@50 { + compatible = "atmel,at30tse004a"; + reg = <0x50>; + }; +}; + +&cfam0_i2c13 { + eeprom@50 { + compatible = "atmel,at30tse004a"; + reg = <0x50>; + }; +};
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +988 -695
2,004 lines not on this page · raw message
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +2 -676
612 lines not on this page · raw message
arch/arm/boot/dts/ibm-power10-dual.dtsi new file +380 -0
380 lines not on this page · raw message
arch/arm/boot/dts/ibm-power10-quad.dtsi new file +1305 -0
1,305 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.31.1
Part of the diff is not shown here. View the raw message.