Early splash screen on AM62x
cover Early splash screen on AM62x
This series is to enable out-of-box early splash screen on AM62x devices with wic images compiled using meta-ti.
With this, u-boot SPL or u-boot proper can load TI logo from boot partition and display it while board is being booted.
Devarsh Thakkar (2):
u-boot-ti-staging_2023.04: Copy bitmap file to boot partition for
AM62x
conf: machine: am62xx: Add TI logo as image boot file
meta-ti-bsp/conf/machine/include/am62xx.inc | 3 +++ .../recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb | 9 +++++++++ 2 files changed, 12 insertions(+)
Signature · 1 line
2.34.1
PATCH 1/2 u-boot-ti-staging_2023.04: Copy bitmap file to boot partition for AM62x
Early splash screen support for AM62x has been enabled in u-boot and it requires ti.gz bitmap file to be present in boot partition as per the default environment settings done in u-boot [1].
Copy ti.gz [2] to boot partition to enable out of box early display on AM62x when it is flashed with the wic image compiled using TI's bsp.
[1] https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am62x/am62x.env?h=09.00.00.001#n34
[2] https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/tools/logos/ti.gz?h=ti-u-boot-2023.04
--- .../recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb | 9 +++++++++ 1 file changed, 9 insertions(+)
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +9 -0
@@ -8,3 +8,12 @@ BRANCH = "ti-u-boot-2023.04" SRCREV = "d8e6f9178f6c80abff4ed2e9094001357bda40d4" +do_install:append:am62xx() { + install -d ${D}/boot + install -m 0644 ${S}/tools/logos/ti.gz ${D}/boot +} + +do_deploy:append:am62xx() { + install -d ${DEPLOYDIR} + install -m 0644 ${S}/tools/logos/ti.gz ${DEPLOYDIR} +}
Signature · 1 line
2.34.1
PATCH 2/2 conf: machine: am62xx: Add TI logo as image boot file
In reply to Devarsh ThakkarAdd TI logo bitmap image as image boot file so that it gets copied to boot partition and A53 SPL or U-boot proper can load it and display during board bootup.
--- meta-ti-bsp/conf/machine/include/am62xx.inc | 3 +++ 1 file changed, 3 insertions(+)
meta-ti-bsp/conf/machine/include/am62xx.inc +3 -0
@@ -15,6 +15,9 @@ IMAGE_BOOT_FILES += "tiboot3-am62x-gp-evm.bin" # Since default tiboot3.bin on AM62x is for HS-FS, add a version for HS-SE IMAGE_BOOT_FILES += "tiboot3-am62x-hs-evm.bin" +# Bitmap image tarball for early splashscreen +IMAGE_BOOT_FILES += "ti.gz" + TFA_BOARD = "lite" TFA_K3_SYSTEM_SUSPEND = "1"
Signature · 1 line
2.34.1
Re: [meta-ti] [kirkstone] [PATCH 1/2] u-boot-ti-staging_2023.04: Copy bitmap file to boot partition for AM62x
In reply to Devarsh ThakkarQuoted 21 lines · Devarsh Thakkar
Early splash screen support for AM62x has been enabled in u-boot and it requires ti.gz bitmap file to be present in boot partition as per the default environment settings done in u-boot [1].
Copy ti.gz [2] to boot partition to enable out of box early display on AM62x when it is flashed with the wic image compiled using TI's bsp.
[1] https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am62x/am62x.env?h=09.00.00.001#n34
[2] https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/tools/logos/ti.gz?h=ti-u-boot-2023.04Signed-off-by Devarsh Thakkar <[email protected]>--- .../recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb | 9 +++++++++ 1 file changed, 9 insertions(+)meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +0
-0
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb BRANCH = "ti-u-boot-2023.04" · line 13
Quoted 6 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +3
-0@@ -8,3 +8,12 @@ BRANCH = "ti-u-boot-2023.04" SRCREV = "d8e6f9178f6c80abff4ed2e9094001357bda40d4" +do_install:append:am62xx() { + install -d ${D}/boot + install -m 0644 ${S}/tools/logos/ti.gz ${D}/boot
Could you copy this over as ti_logo.gz or similar so we have some idea of the contents.
Andrew
Quoted 6 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +6
-0+} + +do_deploy:append:am62xx() { + install -d ${DEPLOYDIR} + install -m 0644 ${S}/tools/logos/ti.gz ${DEPLOYDIR} +}
Re: [meta-ti] [kirkstone] [PATCH 1/2] u-boot-ti-staging_2023.04: Copy bitmap file to boot partition for AM62x
Hi Andrew,
Thanks for the quick review.
Quoted 19 lines · Andrew Davis
Quoted 18 lines · Devarsh Thakkar
Early splash screen support for AM62x has been enabled in u-boot and it requires ti.gz bitmap file to be present in boot partition as per the default environment settings done in u-boot [1].
Copy ti.gz [2] to boot partition to enable out of box early display on AM62x when it is flashed with the wic image compiled using TI's bsp.
[1]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am62x/am62x.env?h=09.00.00.001#n34
[2]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/tools/logos/ti.gz?h=ti-u-boot-2023.04Signed-off-by Devarsh Thakkar <[email protected]>---
.../recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb | 9 +++++++++1 file changed, 9 insertions(+)
Quoted 14 lines
Quoted 10 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +0
-0@@ -8,3 +8,12 @@ BRANCH = "ti-u-boot-2023.04"SRCREV = "
d8e6f9178f6c80abff4ed2e9094001357bda40d4" +do_install:append:am62xx() {
+ install -d ${D}/boot
+ install -m 0644 ${S}/tools/logos/ti.gz ${D}/bootCould you copy this over as ti_logo.gz or similar so we have some idea of the contents.
I agree with you regarding naming convention, but unfortunately I think this file is already present in upstream as ti.gz [1] so we thought to stick with it and rather not change it in ti-u-boot.
[1] https://github.com/u-boot/u-boot/blob/master/tools/logos/ti.gz
Regards
Devarsh
Quoted 8 lines
Andrew
Quoted 6 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +6
-0+} + +do_deploy:append:am62xx() { + install -d ${DEPLOYDIR} + install -m 0644 ${S}/tools/logos/ti.gz ${DEPLOYDIR} +}
Re: [meta-ti] [kirkstone] [PATCH 1/2] u-boot-ti-staging_2023.04: Copy bitmap file to boot partition for AM62x
Quoted 39 lines · Devarsh Thakkar
Hi Andrew,
Thanks for the quick review.
Quoted 19 lines · Andrew Davis
Quoted 18 lines · Devarsh Thakkar
Early splash screen support for AM62x has been enabled in u-boot and it requires ti.gz bitmap file to be present in boot partition as per the default environment settings done in u-boot [1].
Copy ti.gz [2] to boot partition to enable out of box early display on AM62x when it is flashed with the wic image compiled using TI's bsp.
[1]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am62x/am62x.env?h=09.00.00.001#n34
[2]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/tools/logos/ti.gz?h=ti-u-boot-2023.04Signed-off-by Devarsh Thakkar <[email protected]>--- .../recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb | 9 +++++++++ 1 file changed, 9 insertions(+)Quoted 14 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb BRANCH = "ti-u-boot-2023.04" · line 11
Quoted 10 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +2
-0@@ -8,3 +8,12 @@ BRANCH = "ti-u-boot-2023.04" SRCREV = "d8e6f9178f6c80abff4ed2e9094001357bda40d4" +do_install:append:am62xx() { + install -d ${D}/boot + install -m 0644 ${S}/tools/logos/ti.gz ${D}/bootCould you copy this over as ti_logo.gz or similar so we have some idea of the contents.
Quoted 4 lines
I agree with you regarding naming convention, but unfortunately I think this file is already present in upstream as ti.gz [1] so we thought to stick with it and rather not change it in ti-u-boot.
In u-boot it is in a folder called "logos", you are moving it into the generic "boot" partition. Could you put it in /boot/logo/ti.gz instead?
Quoted 13 lines
[1] https://github.com/u-boot/u-boot/blob/master/tools/logos/ti.gz
Regards
DevarshQuoted 8 lines
Andrew
Quoted 6 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +6
-0+} + +do_deploy:append:am62xx() { + install -d ${DEPLOYDIR} + install -m 0644 ${S}/tools/logos/ti.gz ${DEPLOYDIR} +}
Re: [meta-ti] [kirkstone] [PATCH 1/2] u-boot-ti-staging_2023.04: Copy bitmap file to boot partition for AM62x
Hi Andrew,
Thanks for the suggestions.
Quoted 40 lines · Andrew Davis
Quoted 39 lines · Devarsh Thakkar
Hi Andrew,
Thanks for the quick review.
Quoted 33 lines · Andrew Davis
Quoted 24 lines · Devarsh Thakkar
Early splash screen support for AM62x has been enabled in u-boot and it requires ti.gz bitmap file to be present in boot partition as per the default environment settings done in u-boot [1].
Copy ti.gz [2] to boot partition to enable out of box early display on AM62x when it is flashed with the wic image compiled using TI's bsp.
[1]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am62x/am62x.env?h=09.00.00.001#n34
[2]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/tools/logos/ti.gz?h=ti-u-boot-2023.04Signed-off-by Devarsh Thakkar <[email protected]>---
.../recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb | 9 +++++++++1 file changed, 9 insertions(+)meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +0
-0@@ -8,3 +8,12 @@ BRANCH = "ti-u-boot-2023.04"Quoted 4 lines
SRCREV = "
d8e6f9178f6c80abff4ed2e9094001357bda40d4" +do_install:append:am62xx() {
+ install -d ${D}/boot
+ install -m 0644 ${S}/tools/logos/ti.gz ${D}/bootCould you copy this over as ti_logo.gz or similar so we have some idea of the contents.
Quoted 8 lines
Quoted 4 lines
I agree with you regarding naming convention, but unfortunately I think this file is already present in upstream as ti.gz [1] so we thought to stick with it and rather not change it in ti-u-boot.
In u-boot it is in a folder called "logos", you are moving it into the generic "boot" partition. Could you put it in
/boot/logo/ti.gzinstead?
Yeah, that also makes sense to me to have a logos directory if there is a possibility of having multiple logos with different resolutions so that user can choose based upon the connector being used.
But this as well will require a change in u-boot's am62x.env file's splashfile variable, moreover I had to make a change in oe-core to allow installation of directories in boot partition for the same [1].
Meanwhile I discussed with team here (Vignesh and Nikhil) and we agreed to both rename the logo and have it in logos directory but we thought to do the latter as a separate patch when [1] is available in kirkstone, until then we thought it is better to just rename it as ti_logo_414x97.gz in boot partition
So is it ok to go ahead with ti_logo_414x97.gz in boot partition for now and take logos directory change as a separate patch in future when [1] is available ?
Regards
Devarsh
Quoted 13 lines
Quoted 13 lines
[1] https://github.com/u-boot/u-boot/blob/master/tools/logos/ti.gz
Regards
DevarshQuoted 8 lines
Andrew
Quoted 6 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +6
-0+} + +do_deploy:append:am62xx() { + install -d ${DEPLOYDIR} + install -m 0644 ${S}/tools/logos/ti.gz ${DEPLOYDIR} +}
Re: [meta-ti] [kirkstone] [PATCH 1/2] u-boot-ti-staging_2023.04: Copy bitmap file to boot partition for AM62x
Quoted 68 lines · Devarsh Thakkar
Hi Andrew,
Thanks for the suggestions.
Quoted 40 lines · Andrew Davis
Quoted 39 lines · Devarsh Thakkar
Hi Andrew,
Thanks for the quick review.
Quoted 33 lines · Andrew Davis
Quoted 24 lines · Devarsh Thakkar
Early splash screen support for AM62x has been enabled in u-boot and it requires ti.gz bitmap file to be present in boot partition as per the default environment settings done in u-boot [1].
Copy ti.gz [2] to boot partition to enable out of box early display on AM62x when it is flashed with the wic image compiled using TI's bsp.
[1]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/board/ti/am62x/am62x.env?h=09.00.00.001#n34
[2]
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/tools/logos/ti.gz?h=ti-u-boot-2023.04Signed-off-by Devarsh Thakkar <[email protected]>--- .../recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb | 9 +++++++++ 1 file changed, 9 insertions(+)meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +0
-0meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb BRANCH = "ti-u-boot-2023.04" · line 11
Quoted 4 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +2
-0@@ -8,3 +8,12 @@ BRANCH = "ti-u-boot-2023.04" SRCREV = "d8e6f9178f6c80abff4ed2e9094001357bda40d4" +do_install:append:am62xx() { + install -d ${D}/boot + install -m 0644 ${S}/tools/logos/ti.gz ${D}/bootCould you copy this over as ti_logo.gz or similar so we have some idea of the contents.
Quoted 8 lines
Quoted 4 lines
I agree with you regarding naming convention, but unfortunately I think this file is already present in upstream as ti.gz [1] so we thought to stick with it and rather not change it in ti-u-boot.
In u-boot it is in a folder called "logos", you are moving it into the generic "boot" partition. Could you put it in
/boot/logo/ti.gzinstead?Yeah, that also makes sense to me to have a logos directory if there is a possibility of having multiple logos with different resolutions so that user can choose based upon the connector being used.
But this as well will require a change in u-boot's am62x.env file's splashfile variable, moreover I had to make a change in oe-core to allow installation of directories in boot partition for the same [1].
Meanwhile I discussed with team here (Vignesh and Nikhil) and we agreed to both rename the logo and have it in logos directory but we thought to do the latter as a separate patch when [1] is available in kirkstone, until then we thought it is better to just rename it as ti_logo_414x97.gz in boot partition
Quoted 7 lines
So is it ok to go ahead with ti_logo_414x97.gz in boot partition for now and take logos directory change as a separate patch in future when [1] is available ?
Sounds good to me.
Andrew
Quoted 16 lines
Regards
DevarshQuoted 13 lines
Quoted 13 lines
[1] https://github.com/u-boot/u-boot/blob/master/tools/logos/ti.gz
Regards
DevarshQuoted 8 lines
Andrew
Quoted 6 lines
meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb +6
-0+} + +do_deploy:append:am62xx() { + install -d ${DEPLOYDIR} + install -m 0644 ${S}/tools/logos/ti.gz ${DEPLOYDIR} +}