Sacrifice your first born to the linter
v2 cover Sacrifice your first born to the linter
A few days ago someone in the beagle community reported some cryptic errors from oe-layersetup so I took the time to address all of the issues reported by Shellcheck and add some extra sanity checks.
I tried to split it into reasonable segments.
Resubmitting with a sane email I guess. Probably good I had to resubmit it. Apparently somewhere along the way a patch was dropped in the first series.
Randolph Sapp (16):
oe-layertool-setup: split logic and/or expressions
oe-layertool-setup: prefer use of $() notation
oe-layertool-setup: replace all x comparisons with -n/-z
oe-layertool-setup: fix all the printf calls
oe-layertool-setup: fix all quoting, switch eval to export
oe-layertool-setup: only invoke read with -r
oe-layertool-setup: check exit code directly
oe-layertool-setup: guard all cd calls
oe-layertool-setup: eliminate useless cat
oe-layertool-setup: use subshell execution with redirect
oe-layertool-setup: guard against invalid expression in case
oe-layertool-setup: replace all calls to echo with printf
oe-layertool-setup: drop unused variable
oe-layertool-setup: add a path sanity check for oebase
oe-layertool-setup: fix multi-line printfs
oe-layertool-setup: add sanity check for layer names
oe-layertool-setup.sh | 435 +++++++++++++++++++++--------------------- 1 file changed, 220 insertions(+), 215 deletions(-)
Signature · 1 line
2.41.0
PATCH v2 12/16 oe-layertool-setup: replace all calls to echo with printf
Replace all echo calls with printf '%s\n' since that handles arbitrary string input much more reliably.
--- oe-layertool-setup.sh | 137 +++++++++++++++++++++--------------------- 1 file changed, 69 insertions(+), 68 deletions(-)
oe-layertool-setup.sh +69 -68
@@ -128,14 +128,14 @@ check_input() { # Check that at least -i or -f was used if [ "$interactive" = "n" ] && [ -z "$inputfile" ] then - echo "ERROR: You must either use this script with the -i or -f options" + printf '%s\n' "ERROR: You must either use this script with the -i or -f options" usage fi # If an input file was given make sure it exists if [ ! -f "$inputfile" ] then - echo "ERROR: the file \"$inputfile\" given for inputfile does not exist" + printf '%s\n' "ERROR: the file \"$inputfile\" given for inputfile does not exist" usage fi
@@ -154,29 +154,29 @@ check_input() { # Input is a line of the form OECORE.*=value parse_oecore_line() { - var=$(echo "$1" | cut -d= -f1) - val=$(echo "$1" | cut -d= -f2) + var=$(printf '%s\n' "$1" | cut -d= -f1) + val=$(printf '%s\n' "$1" | cut -d= -f2) export "$var"="$val" } # Input is a line of the form BITBAKE.*=value parse_bitbake_line() { - var=$(echo "$1" | cut -d= -f1) - val=$(echo "$1" | cut -d= -f2) + var=$(printf '%s\n' "$1" | cut -d= -f1) + val=$(printf '%s\n' "$1" | cut -d= -f2) export "$var"="$val" } # Input is a line of the form LOCALCONF:.*=value parse_localconf_line() { - localconf=$(echo "$1" | cut -d: -f2-100) - echo "$localconf" >> "$oebase/tmp_append_local.conf" + localconf=$(printf '%s\n' "$1" | cut -d: -f2-100) + printf '%s\n' "$localconf" >> "$oebase/tmp_append_local.conf" } # Input is a line of the form MOTD:<msg> parse_motd_line() { - motd=$(echo "$1" | cut -d: -f2-100) - echo "$motd" >> "$oebase/tmp_motd" - echo "$motd" + motd=$(printf '%s\n' "$1" | cut -d: -f2-100) + printf '%s\n' "$motd" >> "$oebase/tmp_motd" + printf '%s\n' "$motd" }
@@ -197,11 +197,11 @@ parse_repo_line() { # split the line on the comma separators # use the prefix if it was set. - export "${prefix}name"="$(echo "$1" | cut -d, -f1)" - export "${prefix}uri"="$(echo "$1" | cut -d, -f2)" - export "${prefix}branch"="$(echo "$1" | cut -d, -f3)" - export "${prefix}commit"="$(echo "$1" | cut -d, -f4)" - parsed_layers=$(echo "$1" | cut -d, -f5-) + export "${prefix}name"="$(printf '%s\n' "$1" | cut -d, -f1)" + export "${prefix}uri"="$(printf '%s\n' "$1" | cut -d, -f2)" + export "${prefix}branch"="$(printf '%s\n' "$1" | cut -d, -f3)" + export "${prefix}commit"="$(printf '%s\n' "$1" | cut -d, -f4)" + parsed_layers=$(printf '%s\n' "$1" | cut -d, -f5-) # If no layers= was used, then don't add any layers temp_layers="none"
@@ -210,9 +210,10 @@ parse_repo_line() { if [ -n "$parsed_layers" ] then temp_layers="" - temp=$(echo "$parsed_layers" | cut -d= -f2) - # temporarily reset the IFS value to : to split the layers - for x in $(IFS=":"; echo "$temp") + temp=$(printf '%s\n' "$parsed_layers" | cut -d= -f2) + # use tr to split the layers since we assume layer names don't have + # whitespace characters later anyway + for x in $(printf '%s\n' "$temp" | tr ':' ' ') do # Add the $name value to each layer so that we have consistency # with how the layers are represented between the saved value
@@ -262,13 +263,13 @@ parse_input_file() { fi # Skip comment lines - if echo "$line" | grep -q -e "^#" + if printf '%s\n' "$line" | grep -q -e "^#" then continue fi # If the line starts with OECORE then parse the OECORE setting - if echo "$line" | grep -q -e "^OECORE.*=" + if printf '%s\n' "$line" | grep -q -e "^OECORE.*=" then parse_oecore_line "$line" output="${output}${line}\n"
@@ -276,7 +277,7 @@ parse_input_file() { fi # If the line starts with BITBAKE then parse the BITBAKE setting - if echo "$line" | grep -q -e "^BITBAKE.*=" + if printf '%s\n' "$line" | grep -q -e "^BITBAKE.*=" then parse_bitbake_line "$line" output="${output}${line}\n"
@@ -284,7 +285,7 @@ parse_input_file() { fi # If the line starts with LOCALCONF: then parse the LOCALCONF: setting - if echo "$line" | grep -q -e "^LOCALCONF:.*" + if printf '%s\n' "$line" | grep -q -e "^LOCALCONF:.*" then parse_localconf_line "$line" output="${output}${line}\n"
@@ -292,7 +293,7 @@ parse_input_file() { fi # If the line starts with MOTD: then parse the MOTD: setting - if echo "$line" | grep -q -e "^MOTD:.*" + if printf '%s\n' "$line" | grep -q -e "^MOTD:.*" then parse_motd_line "$line" continue
@@ -335,9 +336,9 @@ configure_repo() { if [ -n "$temp" ] then - echo "This repository ($name) has already been configured with the following values:" + printf '%s\n' "This repository ($name) has already been configured with the following values:" printf '\t%s\n' "$temp" - echo "Skipping configuring duplicate repository" + printf '%s\n' "Skipping configuring duplicate repository" return 1 fi
@@ -346,10 +347,10 @@ configure_repo() { get_repo_uri fi - echo "" - echo "" - echo "cloning repo $name" - echo "" + printf '%s\n' "" + printf '%s\n' "" + printf '%s\n' "cloning repo $name" + printf '%s\n' "" clone_repo
@@ -392,7 +393,7 @@ clone_repo() { else if ! "$scriptdir/git_retry.sh" clone "$uri" "$sourcedir/$name" then - echo "ERROR: Could not clone repository at $uri" + printf '%s\n' "ERROR: Could not clone repository at $uri" exit 1 fi fi
@@ -411,7 +412,7 @@ get_repo_branch() { t_branches=$(git branch -r | sed '/origin\/HEAD/d') for b in $t_branches do - branches="${branches}$(echo "$b" | sed 's:.*origin/::g')\n" + branches="${branches}$(printf '%s\n' "$b" | sed 's:.*origin/::g')\n" done branches=$(printf '%s\n' "$branches" | sort | uniq)
@@ -440,7 +441,7 @@ EOM if [ "$found" != "1" ] then - echo "Invalid branch ($input) selected. Please try again" + printf '%s\n' "Invalid branch ($input) selected. Please try again" fi done branch=$input
@@ -521,8 +522,8 @@ verify_layers() { do if [ ! -f "$sourcedir/$l/conf/layer.conf" ] then - echo "ERROR: the $l layer in the $name repository could not be" - echo " found. Bailing out." + printf '%s\n' "ERROR: the $l layer in the $name repository could not be" + printf '%s\n' " found. Bailing out." exit 1 fi done
@@ -575,7 +576,7 @@ select_layers() { if [ "$arg1" != "all" ] then - echo "arg1 = $arg1" + printf '%s\n' "arg1 = $arg1" # Prompt for which layers to configure cat << EOM
@@ -587,7 +588,7 @@ EOM for l in $t_layers do - printf '\t%s\n' "$(echo "$l" | sed "s:${name}\/::")" + printf '\t%s\n' "$(printf '%s\n' "$l" | sed "s:${name}\/::")" done cat << EOM
@@ -639,7 +640,7 @@ get_oecorelayerconf() { if [ ! -e "$OECORELAYERCONFPATH" ] then - echo "ERROR: Could not find the specified layer conf file $OECORELAYERCONFPATH" + printf '%s\n' "ERROR: Could not find the specified layer conf file $OECORELAYERCONFPATH" fi return
@@ -679,7 +680,7 @@ EOM OECORELAYERCONF=$input OECORELAYERCONFPATH=$sourcedir/$OECORELAYERCONF else - echo "ERROR: Could not find the specified layer conf file $input" + printf '%s\n' "ERROR: Could not find the specified layer conf file $input" fi done }
@@ -693,7 +694,7 @@ get_oecorelocalconf() { if [ ! -e "$OECORELOCALCONFPATH" ] then - echo "ERROR: Could not find the specified local conf file $OECORELOCALCONFPATH" + printf '%s\n' "ERROR: Could not find the specified local conf file $OECORELOCALCONFPATH" exit 1 fi
@@ -734,7 +735,7 @@ EOM OECORELOCALCONF=$input OECORELOCALCONFPATH=$sourcedir/$OECORELOCALCONF else - echo "ERROR: Could not find the inputted sample file: $input" + printf '%s\n' "ERROR: Could not find the inputted sample file: $input" exit 1 fi done
@@ -769,7 +770,7 @@ EOM do printf '\t%s \\\n' "$l" >> "$confdir/bblayers.conf" done - echo "\"" >> "$confdir/bblayers.conf" + printf '%s\n' "\"" >> "$confdir/bblayers.conf" }
@@ -792,8 +793,8 @@ EOM if [ -e "$confdir/local.conf" ] then - echo "WARNING: Found existing $confdir/local.conf" - echo "Saving a backup to $confdir/local.conf.bak" + printf '%s\n' "WARNING: Found existing $confdir/local.conf" + printf '%s\n' "Saving a backup to $confdir/local.conf.bak" cp -f "$confdir/local.conf" "$confdir/local.conf.bak" fi
@@ -819,16 +820,16 @@ EOM if [ -e "$oebase/tmp_append_local.conf" ] then { - echo ""; - echo "#===================================================================="; - echo "# LOCALCONF: settings from config file:"; - echo "# $inputfile"; - echo "#"; - echo "# Do not remove."; - echo "#--------------------------------------------------------------------"; + printf '%s\n' ""; + printf '%s\n' "#===================================================================="; + printf '%s\n' "# LOCALCONF: settings from config file:"; + printf '%s\n' "# $inputfile"; + printf '%s\n' "#"; + printf '%s\n' "# Do not remove."; + printf '%s\n' "#--------------------------------------------------------------------"; cat "$oebase/tmp_append_local.conf"; - echo "#===================================================================="; - echo ""; + printf '%s\n' "#===================================================================="; + printf '%s\n' ""; } >> "$confdir/local.conf" rm "$oebase/tmp_append_local.conf" fi
@@ -838,9 +839,9 @@ print_motd() { if [ -e "$oebase/tmp_motd" ] then - echo "" + printf '%s\n' "" cat "$oebase/tmp_motd" - echo "" + printf '%s\n' "" fi }
@@ -854,7 +855,7 @@ print_image_names() { if [ "${FOLDER}" = "meta-arago" ]; then RECO="[recommended]" fi - echo "From ${FOLDER}${RECO}:" + printf '%s\n' "From ${FOLDER}${RECO}:" F_IMAGE_FOLDERS=$(find "${SOURCES}/${FOLDER}" -type d -a -iname images|grep recipes-core) for IMG_FOLDER in ${F_IMAGE_FOLDERS} do
@@ -863,11 +864,11 @@ print_image_names() { for img in ${F_IMAGES} do name=$(basename "${img}"|sed 's/\.bb$//g') - summary=$(grep SUMMARY "${img}"|cut -d '=' -f2| sed 's/["/]//g'|xargs echo) + summary=$(grep SUMMARY "${img}"|cut -d '=' -f2| sed 's/["/]//g') if [ -z "${summary}" ]; then summary="No Summary available" fi - echo " ${name}: ${summary}" + printf '%s\n' " ${name}: ${summary}" done fi done
@@ -927,9 +928,9 @@ export BUILDDIR="${builddir}" EOM if [ "$BITBAKE_INCLUSIVE_VARS" = "no" ]; then - echo "export BB_ENV_EXTRAWHITE=\"MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE\"" >> "$confdir/setenv" + printf 'export %s="%s"\n' 'BB_ENV_EXTRAWHITE' 'MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE' >> "$confdir/setenv" else - echo "export BB_ENV_PASSTHROUGH_ADDITIONS=\"MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE\"" >> "$confdir/setenv" + printf 'export %s="%s"\n' 'BB_ENV_PASSTHROUGH_ADDITIONS' 'MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE' >> "$confdir/setenv" fi }
@@ -937,15 +938,15 @@ EOM build_repo_line() { # clean up the layers to remove the repository name and add : divider temp_layers="" - for l in $(echo "$repo_layers" | sed "s:${name}::" | sed -e 's:^\/::') + for l in $(printf '%s\n' "$repo_layers" | sed "s:${name}::" | sed -e 's:^\/::') do - temp_layers="${temp_layers}$(echo "$l" | sed "s:${name}\/::"):" + temp_layers="${temp_layers}$(printf '%s\n' "$l" | sed "s:${name}\/::"):" done # Lastly clean off any trailing : - temp_layers=$(echo "$temp_layers" | sed 's/:$//') + temp_layers=$(printf '%s\n' "$temp_layers" | sed 's/:$//') - echo "$name,$uri,$branch,$commit,layers=$temp_layers" + printf '%s\n' "$name,$uri,$branch,$commit,layers=$temp_layers" } ###############
@@ -1016,9 +1017,9 @@ then save_layers - echo "" - echo "" - echo "Would you like to configure another repository? [y/n] " + printf '%s\n' "" + printf '%s\n' "" + printf '%s\n' "Would you like to configure another repository? [y/n] " read -r cont done fi
@@ -1039,7 +1040,7 @@ then mkdir -p "$dir" fi printf '%s\n' "$output" > "$outputfile" - echo "Output file is $outputfile" + printf '%s\n' "Output file is $outputfile" fi create_setenv_file
Signature · 1 line
2.41.0
PATCH v2 1/16 oe-layertool-setup: split logic and/or expressions
In reply to Randolph SappShellcheck:
Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
--- oe-layertool-setup.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
oe-layertool-setup.sh +2 -2
@@ -126,7 +126,7 @@ exit 1 check_input() { # Check that at least -i or -f was used - if [ "$interactive" = "n" -a "x$inputfile" = "x" ] + if [ "$interactive" = "n" ] && [ "x$inputfile" = "x" ] then echo "ERROR: You must either use this script with the -i or -f options" usage
@@ -1000,7 +1000,7 @@ fi if [ "x$interactive" = "xy" ] then cont="y" - while [ "x$cont" = "xy" -o "x$cont" = "xY" ] + while [ "x$cont" = "xy" ] || [ "x$cont" = "xY" ] do # clean up the variables for each repo name=""
Signature · 1 line
2.41.0
PATCH v2 2/16 oe-layertool-setup: prefer use of $() notation
In reply to Randolph SappShellcheck:
Use $(...) notation instead of legacy backticked ....
--- oe-layertool-setup.sh | 80 +++++++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 40 deletions(-)
oe-layertool-setup.sh +40 -40
@@ -45,8 +45,8 @@ interactive="n" # flag for interactive mode. Default is n resethead="n" # flag for reset head mode. Default is n layers="" # variable holding the layers to add to bblayers.conf output="" # variable holding the output to write to outputfile -scriptdir=`pwd` # directory of this calling script -oebase=`pwd` # variable to hold base directory +scriptdir=$(pwd) # directory of this calling script +oebase=$(pwd) # variable to hold base directory sourcedir="" # directory where repos will be cloned builddir="" # directory for builds confdir="" # directory for build configuration files
@@ -154,27 +154,27 @@ check_input() { # Input is a line of the form OECORE.*=value parse_oecore_line() { - var=`echo $1 | cut -d= -f1` - val=`echo $1 | cut -d= -f2` + var=$(echo $1 | cut -d= -f1) + val=$(echo $1 | cut -d= -f2) eval $var=$val } # Input is a line of the form BITBAKE.*=value parse_bitbake_line() { - var=`echo $1 | cut -d= -f1` - val=`echo $1 | cut -d= -f2` + var=$(echo $1 | cut -d= -f1) + val=$(echo $1 | cut -d= -f2) eval $var=$val } # Input is a line of the form LOCALCONF:.*=value parse_localconf_line() { - localconf=`echo "$1" | cut -d: -f2-100` + localconf=$(echo "$1" | cut -d: -f2-100) echo "$localconf" >> $oebase/tmp_append_local.conf } # Input is a line of the form MOTD:<msg> parse_motd_line() { - motd=`echo "$1" | cut -d: -f2-100` + motd=$(echo "$1" | cut -d: -f2-100) echo "$motd" >> $oebase/tmp_motd echo "$motd" }
@@ -197,11 +197,11 @@ parse_repo_line() { # split the line on the comma separators # use the prefix if it was set. - eval $prefix"name"=`echo $1 | cut -d, -f1` - eval $prefix"uri"=`echo $1 | cut -d, -f2` - eval $prefix"branch"=`echo $1 | cut -d, -f3` - eval $prefix"commit"=`echo $1 | cut -d, -f4` - parsed_layers=`echo $1 | cut -d, -f5-` + eval $prefix"name"=$(echo $1 | cut -d, -f1) + eval $prefix"uri"=$(echo $1 | cut -d, -f2) + eval $prefix"branch"=$(echo $1 | cut -d, -f3) + eval $prefix"commit"=$(echo $1 | cut -d, -f4) + parsed_layers=$(echo $1 | cut -d, -f5-) # If no layers= was used, then don't add any layers temp_layers="none"
@@ -210,9 +210,9 @@ parse_repo_line() { if [ "x$parsed_layers" != "x" ] then temp_layers="" - temp=`echo $parsed_layers | cut -d= -f2` + temp=$(echo $parsed_layers | cut -d= -f2) # temporarily reset the IFS value to : to split the layers - for x in `IFS=":";echo $temp` + for x in $(IFS=":";echo $temp) do # Add the $name value to each layer so that we have consistency # with how the layers are represented between the saved value
@@ -319,7 +319,7 @@ parse_input_file() { # Create the repository line corresponding to the selections given. # In the case that no layers= option was passed then this will # create the layers= option corresponding to all layers being selected. - repo_line=`build_repo_line` + repo_line=$(build_repo_line) # Save the line in the output variable for if we create an output file output="$output""$repo_line\n"
@@ -338,7 +338,7 @@ configure_repo() { # Check if the repo with $name was already seen. Use the , at the end # of the grep to avoid matching similar named repos. - temp=`printf '%s\n' $output | grep -e "^$name,"` + temp=$(printf '%s\n' $output | grep -e "^$name,") if [ "x$temp" != "x" ] then
@@ -417,12 +417,12 @@ get_repo_branch() { # Get a unique list of branches for the user to chose from # Also delete the origin/HEAD line that the -r option returns - t_branches=`git branch -r | sed '/origin\/HEAD/d'` + t_branches=$(git branch -r | sed '/origin\/HEAD/d') for b in $t_branches do - branches="$branches"`echo $b | sed 's:.*origin/::g'`"\n" + branches="$branches"$(echo $b | sed 's:.*origin/::g')"\n" done - branches=`printf "$branches\n" | sort | uniq` + branches=$(printf "$branches\n" | sort | uniq) cat << EOM
@@ -500,7 +500,7 @@ cat << EOM The $name repository has the following tags available: EOM - tags=`git tag` + tags=$(git tag) if [ "x$tags" = "x" ] then printf "\tNo tags found\n"
@@ -566,7 +566,7 @@ select_layers() { cd $sourcedir # Get a count of how many layers there are - count=`find $name -name "layer.conf" | grep -c layer.conf` + count=$(find $name -name "layer.conf" | grep -c layer.conf) case $count in 0 )
@@ -581,7 +581,7 @@ select_layers() { ;; esac - t_layers=`find $name -name "layer.conf" | sed 's:\/conf\/layer.conf::'` + t_layers=$(find $name -name "layer.conf" | sed 's:\/conf\/layer.conf::') if [ "x$arg1" != "xall" ] then
@@ -597,7 +597,7 @@ EOM for l in $t_layers do - printf "\t"`echo $l | sed "s:${name}\/::"`"\n" + printf "\t"$(echo $l | sed "s:${name}\/::")"\n" done cat << EOM
@@ -656,7 +656,7 @@ get_oecorelayerconf() { fi cd $sourcedir - confs=`find . -name "bblayers.conf.sample"` + confs=$(find . -name "bblayers.conf.sample") done="n"
@@ -711,7 +711,7 @@ get_oecorelocalconf() { fi cd $sourcedir - confs=`find . -name "local.conf.sample"` + confs=$(find . -name "local.conf.sample") done="n"
@@ -813,7 +813,7 @@ EOM # Find if old DL_DIR was set if [ -e $confdir/local.conf.bak ] then - old_dldir=`cat $confdir/local.conf.bak | grep -e "^DL_DIR =" | sed 's|DL_DIR = ||' | sed 's/"//g'` + old_dldir=$(cat $confdir/local.conf.bak | grep -e "^DL_DIR =" | sed 's|DL_DIR = ||' | sed 's/"//g') else old_dldir="$oebase/downloads" fi
@@ -854,7 +854,7 @@ print_motd() { print_image_names() { SOURCES="${1}" - FOLDERS=`find "${SOURCES}" -type d -a -iname images|grep recipes-core|sed -e "s/.*sources\///g"|cut -d '/' -f1|sort -u -r` + FOLDERS=$(find "${SOURCES}" -type d -a -iname images|grep recipes-core|sed -e "s/.*sources\///g"|cut -d '/' -f1|sort -u -r) IMAGES="" for FOLDER in ${FOLDERS} do
@@ -863,15 +863,15 @@ print_image_names() { RECO="[recommended]" fi echo "From ${FOLDER}${RECO}:" - F_IMAGE_FOLDERS=`find "${SOURCES}/${FOLDER}" -type d -a -iname images|grep recipes-core` + F_IMAGE_FOLDERS=$(find "${SOURCES}/${FOLDER}" -type d -a -iname images|grep recipes-core) for IMG_FOLDER in ${F_IMAGE_FOLDERS} do - F_IMAGES=`find "${IMG_FOLDER}" -iname *.bb` + F_IMAGES=$(find "${IMG_FOLDER}" -iname *.bb) if [ -n "${F_IMAGES}" ]; then for img in ${F_IMAGES} do - name=`basename "${img}"|sed 's/\.bb$//g'` - summary=`grep SUMMARY "${img}"|cut -d '=' -f2| sed 's/["/]//g'|xargs echo` + name=$(basename "${img}"|sed 's/\.bb$//g') + summary=$(grep SUMMARY "${img}"|cut -d '=' -f2| sed 's/["/]//g'|xargs echo) if [ -z "${summary}" ]; then summary="No Summary available" fi
@@ -911,7 +911,7 @@ cat > $confdir/setenv << EOM export OEBASE=${oebase} # try to find out bitbake directory -BITBAKEDIR=\`find \${OEBASE}/sources -name "*bitbake*"\` +BITBAKEDIR=\$(find \${OEBASE}/sources -name "*bitbake*") for f in \${BITBAKEDIR} do if [ -d \${f}/bin ]
@@ -922,7 +922,7 @@ done # check for any scripts directories in the top-level of the repos and add those # to the PATH -SCRIPTS=\`find \${OEBASE}/sources -maxdepth 2 -name "scripts" -type d\` +SCRIPTS=\$(find \${OEBASE}/sources -maxdepth 2 -name "scripts" -type d) for s in \${SCRIPTS} do PATH="\${s}:\$PATH"
@@ -945,13 +945,13 @@ EOM build_repo_line() { # clean up the layers to remove the repository name and add : divider temp_layers="" - for l in `echo $repo_layers | sed "s:${name}::" | sed -e 's:^\/::'` + for l in $(echo $repo_layers | sed "s:${name}::" | sed -e 's:^\/::') do - temp_layers="$temp_layers""`echo $l | sed "s:${name}\/::"`:" + temp_layers="$temp_layers""$(echo $l | sed "s:${name}\/::"):" done # Lastly clean off any trailing : - temp_layers=`echo $temp_layers | sed 's/:$//'` + temp_layers=$(echo $temp_layers | sed 's/:$//') echo "$name,$uri,$branch,$commit,layers=$temp_layers" }
@@ -980,7 +980,7 @@ mkdir -p $oebase # retrive the absolute path to the oebase directory incase # a relative path is passed in cd $oebase -oebase=`pwd` +oebase=$(pwd) cd - # Populate the following variables depending on the value of oebase
@@ -1019,7 +1019,7 @@ then # Create the repository line corresponding to the selections given. # In the case that no layers= option was passed then this will # create the layers= option corresponding to all layers being selected. - repo_line=`build_repo_line` + repo_line=$(build_repo_line) # Save the line in the output variable for if we create an output file output="$output""$repo_line\n"
@@ -1043,7 +1043,7 @@ if [ "x$outputfile" != "x" ] then # make sure that the directory for the output file exists cd $oebase - dir=`dirname $outputfile` + dir=$(dirname $outputfile) if [ ! -d $dir ] then mkdir -p $dir
Signature · 1 line
2.41.0
PATCH v2 3/16 oe-layertool-setup: replace all x comparisons with -n/-z
In reply to Randolph SappReplace all the stray x$var comparisons with the proper -n/-z equivalent.
--- oe-layertool-setup.sh | 54 +++++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 27 deletions(-)
oe-layertool-setup.sh +27 -27
@@ -126,7 +126,7 @@ exit 1 check_input() { # Check that at least -i or -f was used - if [ "$interactive" = "n" ] && [ "x$inputfile" = "x" ] + if [ "$interactive" = "n" ] && [ -z "$inputfile" ] then echo "ERROR: You must either use this script with the -i or -f options" usage
@@ -207,7 +207,7 @@ parse_repo_line() { temp_layers="none" # If layers= was used then set the layers variable, empty list would add all found layers - if [ "x$parsed_layers" != "x" ] + if [ -n "$parsed_layers" ] then temp_layers="" temp=$(echo $parsed_layers | cut -d= -f2)
@@ -223,10 +223,10 @@ parse_repo_line() { # Assign the layers. If the temp_layers is empty then set the layers # to all and we will fill in the actual layers in the later steps. - if [ "x$temp_layers" = "x" ] + if [ -z "$temp_layers" ] then eval $prefix"repo_layers"="all" - elif [ "x$temp_layers" = "xnone" ] + elif [ "$temp_layers" = "none" ] then eval $prefix"repo_layers"="none" else
@@ -256,7 +256,7 @@ parse_input_file() { repo_layers="" # Skip empty lines - if [ "x$line" = "x" ] + if [ -z "$line" ] then continue fi
@@ -331,7 +331,7 @@ parse_input_file() { configure_repo() { - if [ "x$name" = "x" ] + if [ -z "$name" ] then get_repo_name fi
@@ -340,7 +340,7 @@ configure_repo() { # of the grep to avoid matching similar named repos. temp=$(printf '%s\n' $output | grep -e "^$name,") - if [ "x$temp" != "x" ] + if [ -n "$temp" ] then echo "This repository ($name) has already been configured with the following values:" printf '\t%s\n' $temp
@@ -348,7 +348,7 @@ configure_repo() { return 1 fi - if [ "x$uri" = "x" ] + if [ -z "$uri" ] then get_repo_uri fi
@@ -360,28 +360,28 @@ configure_repo() { clone_repo - if [ "x$branch" = "x" ] + if [ -z "$branch" ] then get_repo_branch fi checkout_branch - if [ "x$commit" = "x" ] + if [ -z "$commit" ] then get_repo_commit fi checkout_commit - if [ "x$repo_layers" = "xall" ] + if [ "$repo_layers" = "all" ] then # Call select layers with the all option to select all layers select_layers "all" - elif [ "x$repo_layers" = "x" ] + elif [ -z "$repo_layers" ] then select_layers - elif [ "x$repo_layers" = "xnone" ] + elif [ "$repo_layers" = "none" ] then # Call select layers with the none option to not select any layers select_layers "none"
@@ -473,7 +473,7 @@ checkout_branch() { # any. In the case of a clean checkout this should be already up to date, # but for an existing checkout this should be the changes that were # fetched earlier. - if [ "x$resethead" = "xy" ] + if [ "$resethead" = "y" ] then # Instead of merging, reset to remote branch to avoid conflicts due to rebase git reset --hard origin/$branch
@@ -484,7 +484,7 @@ checkout_branch() { checkout_commit() { cd $sourcedir/$name - if [ "x$commit" != "xHEAD" ] + if [ "$commit" != "HEAD" ] then git checkout $commit fi
@@ -501,7 +501,7 @@ The $name repository has the following tags available: EOM tags=$(git tag) - if [ "x$tags" = "x" ] + if [ -z "$tags" ] then printf "\tNo tags found\n" else
@@ -519,7 +519,7 @@ EOM read input - if [ "x$input" = "x" ] + if [ -z "$input" ] then commit="HEAD" fi
@@ -558,7 +558,7 @@ select_layers() { #If so prompt for which layers to configure #If there is only one then just configure that layer and don't prompt - if [ "x$arg1" = "xnone" ] + if [ "$arg1" = "none" ] then repo_layers="" return
@@ -583,7 +583,7 @@ select_layers() { t_layers=$(find $name -name "layer.conf" | sed 's:\/conf\/layer.conf::') - if [ "x$arg1" != "xall" ] + if [ "$arg1" != "all" ] then echo "arg1 = $arg1" # Prompt for which layers to configure
@@ -609,7 +609,7 @@ EOM read input fi - if [ "x$input" = "x" ] + if [ -z "$input" ] then repo_layers=$t_layers else
@@ -643,7 +643,7 @@ EOM get_oecorelayerconf() { # Check if the variable is already set. - if [ "x$OECORELAYERCONF" != "x" ] + if [ -n "$OECORELAYERCONF" ] then OECORELAYERCONFPATH=$scriptdir/$OECORELAYERCONF
@@ -697,7 +697,7 @@ EOM get_oecorelocalconf() { # Check if the variable is already set. - if [ "x$OECORELOCALCONF" != "x" ] + if [ -n "$OECORELOCALCONF" ] then OECORELOCALCONFPATH=$scriptdir/$OECORELOCALCONF
@@ -819,7 +819,7 @@ EOM fi # If command line option was not set use the old dldir - if [ "x$dldir" = "x" ] + if [ -z "$dldir" ] then dldir=$old_dldir fi
@@ -990,17 +990,17 @@ confdir="$builddir/conf" check_input -if [ "x$inputfile" != "x" ] +if [ -n "$inputfile" ] then parse_input_file print_motd fi -if [ "x$interactive" = "xy" ] +if [ "$interactive" = "y" ] then cont="y" - while [ "x$cont" = "xy" ] || [ "x$cont" = "xY" ] + while [ "$cont" = "y" ] || [ "$cont" = "Y" ] do # clean up the variables for each repo name=""
@@ -1039,7 +1039,7 @@ config_oecorelayerconf get_oecorelocalconf config_oecorelocalconf -if [ "x$outputfile" != "x" ] +if [ -n "$outputfile" ] then # make sure that the directory for the output file exists cd $oebase
Signature · 1 line
2.41.0
PATCH v2 4/16 oe-layertool-setup: fix all the printf calls
In reply to Randolph SappYou aren't supposed to use a variable in the printf format definition. It kinda defeats the purpose of using printf.
--- oe-layertool-setup.sh | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
oe-layertool-setup.sh +10 -10
@@ -338,12 +338,12 @@ configure_repo() { # Check if the repo with $name was already seen. Use the , at the end # of the grep to avoid matching similar named repos. - temp=$(printf '%s\n' $output | grep -e "^$name,") + temp=$(printf '%s\n' "$output" | grep -e "^$name,") if [ -n "$temp" ] then echo "This repository ($name) has already been configured with the following values:" - printf '\t%s\n' $temp + printf '\t%s\n' "$temp" echo "Skipping configuring duplicate repository" return 1 fi
@@ -422,7 +422,7 @@ get_repo_branch() { do branches="$branches"$(echo $b | sed 's:.*origin/::g')"\n" done - branches=$(printf "$branches\n" | sort | uniq) + branches=$(printf '%s\n' "$branches" | sort | uniq) cat << EOM
@@ -503,12 +503,12 @@ EOM tags=$(git tag) if [ -z "$tags" ] then - printf "\tNo tags found\n" + printf '\t%s\n' "No tags found" else # Format the tags nicely for t in $tags do - printf "\t* $t\n" + printf '\t%s\n' "* $t" done fi cat << EOM
@@ -597,7 +597,7 @@ EOM for l in $t_layers do - printf "\t"$(echo $l | sed "s:${name}\/::")"\n" + printf '\t%s\n' "$(echo $l | sed "s:${name}\/::")" done cat << EOM
@@ -673,7 +673,7 @@ EOM for f in $confs do - printf "\t$f\n" + printf '\t%s\n' "$f" done cat << EOM
@@ -728,7 +728,7 @@ EOM for f in $confs do - printf "\t$f\n" + printf '\t%s\n' "$f" done cat << EOM
@@ -777,7 +777,7 @@ BBLAYERS += " \\ EOM for l in $layers do - printf "\t$l \\%b" "\n" >> $confdir/bblayers.conf + printf '\t%s \\\n' "$l" >> $confdir/bblayers.conf done echo "\"" >> $confdir/bblayers.conf }
@@ -1048,7 +1048,7 @@ then then mkdir -p $dir fi - printf '%s\n' $output > $outputfile + printf '%s\n' "$output" > $outputfile echo "Output file is $outputfile" fi
Signature · 1 line
2.41.0
PATCH v2 5/16 oe-layertool-setup: fix all quoting, switch eval to export
In reply to Randolph SappQuote everything to prevent unexpected splitting and globbing. Also switch out eval for export where we can. Export is capable of much less runtime shenanigans than eval is.
--- oe-layertool-setup.sh | 222 +++++++++++++++++++++--------------------- 1 file changed, 111 insertions(+), 111 deletions(-)
oe-layertool-setup.sh +111 -111
@@ -133,7 +133,7 @@ check_input() { fi # If an input file was given make sure it exists - if [ ! -f $inputfile ] + if [ ! -f "$inputfile" ] then echo "ERROR: the file \"$inputfile\" given for inputfile does not exist" usage
@@ -142,10 +142,10 @@ check_input() { # If directories do not exist then create them for f in sourcedir builddir confdir do - eval t="$"$f - if [ ! -d $t ] + eval t="\$${f}" + if [ ! -d "$t" ] then - mkdir -p $t + mkdir -p "$t" fi done
@@ -154,28 +154,28 @@ check_input() { # Input is a line of the form OECORE.*=value parse_oecore_line() { - var=$(echo $1 | cut -d= -f1) - val=$(echo $1 | cut -d= -f2) - eval $var=$val + var=$(echo "$1" | cut -d= -f1) + val=$(echo "$1" | cut -d= -f2) + export "$var"="$val" } # Input is a line of the form BITBAKE.*=value parse_bitbake_line() { - var=$(echo $1 | cut -d= -f1) - val=$(echo $1 | cut -d= -f2) - eval $var=$val + var=$(echo "$1" | cut -d= -f1) + val=$(echo "$1" | cut -d= -f2) + export "$var"="$val" } # Input is a line of the form LOCALCONF:.*=value parse_localconf_line() { localconf=$(echo "$1" | cut -d: -f2-100) - echo "$localconf" >> $oebase/tmp_append_local.conf + echo "$localconf" >> "$oebase/tmp_append_local.conf" } # Input is a line of the form MOTD:<msg> parse_motd_line() { motd=$(echo "$1" | cut -d: -f2-100) - echo "$motd" >> $oebase/tmp_motd + echo "$motd" >> "$oebase/tmp_motd" echo "$motd" }
@@ -197,11 +197,11 @@ parse_repo_line() { # split the line on the comma separators # use the prefix if it was set. - eval $prefix"name"=$(echo $1 | cut -d, -f1) - eval $prefix"uri"=$(echo $1 | cut -d, -f2) - eval $prefix"branch"=$(echo $1 | cut -d, -f3) - eval $prefix"commit"=$(echo $1 | cut -d, -f4) - parsed_layers=$(echo $1 | cut -d, -f5-) + export "${prefix}name"="$(echo "$1" | cut -d, -f1)" + export "${prefix}uri"="$(echo "$1" | cut -d, -f2)" + export "${prefix}branch"="$(echo "$1" | cut -d, -f3)" + export "${prefix}commit"="$(echo "$1" | cut -d, -f4)" + parsed_layers=$(echo "$1" | cut -d, -f5-) # If no layers= was used, then don't add any layers temp_layers="none"
@@ -210,14 +210,14 @@ parse_repo_line() { if [ -n "$parsed_layers" ] then temp_layers="" - temp=$(echo $parsed_layers | cut -d= -f2) + temp=$(echo "$parsed_layers" | cut -d= -f2) # temporarily reset the IFS value to : to split the layers - for x in $(IFS=":";echo $temp) + for x in $(IFS=":"; echo "$temp") do # Add the $name value to each layer so that we have consistency # with how the layers are represented between the saved value # and the dynamically parsed values - temp_layers="$temp_layers""$name/$x " + temp_layers="${temp_layers}${name}/${x} " done fi
@@ -225,25 +225,25 @@ parse_repo_line() { # to all and we will fill in the actual layers in the later steps. if [ -z "$temp_layers" ] then - eval $prefix"repo_layers"="all" + export "${prefix}repo_layers"="all" elif [ "$temp_layers" = "none" ] then - eval $prefix"repo_layers"="none" + export "${prefix}repo_layers"="none" else - eval $prefix"repo_layers"='$temp_layers' + export "${prefix}repo_layers"="$temp_layers" fi } parse_input_file() { - if [ -e $oebase/tmp_append_local.conf ] + if [ -e "$oebase/tmp_append_local.conf" ] then - rm $oebase/tmp_append_local.conf + rm "$oebase/tmp_append_local.conf" fi - if [ -e $oebase/tmp_motd ] + if [ -e "$oebase/tmp_motd" ] then - rm $oebase/tmp_motd + rm "$oebase/tmp_motd" fi while read line
@@ -262,41 +262,41 @@ parse_input_file() { fi # Skip comment lines - echo $line | grep -e "^#" > /dev/null + echo "$line" | grep -e "^#" > /dev/null if [ "$?" = "0" ] then continue fi # If the line starts with OECORE then parse the OECORE setting - echo $line | grep -e "^OECORE.*=" > /dev/null + echo "$line" | grep -e "^OECORE.*=" > /dev/null if [ "$?" = "0" ] then - parse_oecore_line $line - output="$output""$line\n" + parse_oecore_line "$line" + output="${output}${line}\n" continue fi # If the line starts with BITBAKE then parse the BITBAKE setting - echo $line | grep -e "^BITBAKE.*=" > /dev/null + echo "$line" | grep -e "^BITBAKE.*=" > /dev/null if [ "$?" = "0" ] then - parse_bitbake_line $line - output="$output""$line\n" + parse_bitbake_line "$line" + output="${output}${line}\n" continue fi # If the line starts with LOCALCONF: then parse the LOCALCONF: setting - echo $line | grep -e "^LOCALCONF:.*" > /dev/null + echo "$line" | grep -e "^LOCALCONF:.*" > /dev/null if [ "$?" = "0" ] then parse_localconf_line "$line" - output="$output""$line\n" + output="${output}${line}\n" continue fi # If the line starts with MOTD: then parse the MOTD: setting - echo $line | grep -e "^MOTD:.*" > /dev/null + echo "$line" | grep -e "^MOTD:.*" > /dev/null if [ "$?" = "0" ] then parse_motd_line "$line"
@@ -305,7 +305,7 @@ parse_input_file() { # Since the line is not a comment or an OECORE setting let's assume # it is a repository information line and parse it - parse_repo_line $line + parse_repo_line "$line" configure_repo
@@ -322,11 +322,11 @@ parse_input_file() { repo_line=$(build_repo_line) # Save the line in the output variable for if we create an output file - output="$output""$repo_line\n" + output="${output}${repo_line}\n" save_layers - done < $inputfile + done < "$inputfile" }
@@ -393,12 +393,12 @@ configure_repo() { clone_repo() { # check if the repo already exists. if so then fetch the latest updates, # else clone it - if [ -d $sourcedir/$name ] + if [ -d "$sourcedir/$name" ] then - cd $sourcedir/$name - $scriptdir/git_retry.sh fetch --all + cd "$sourcedir/$name" + "$scriptdir/git_retry.sh" fetch --all else - $scriptdir/git_retry.sh clone $uri $sourcedir/$name + "$scriptdir/git_retry.sh" clone "$uri" "$sourcedir/$name" if [ "$?" != "0" ] then echo "ERROR: Could not clone repository at $uri"
@@ -413,14 +413,14 @@ get_repo_branch() { while [ "$found" = "0" ] do - cd $sourcedir/$name + cd "$sourcedir/$name" # Get a unique list of branches for the user to chose from # Also delete the origin/HEAD line that the -r option returns t_branches=$(git branch -r | sed '/origin\/HEAD/d') for b in $t_branches do - branches="$branches"$(echo $b | sed 's:.*origin/::g')"\n" + branches="${branches}$(echo "$b" | sed 's:.*origin/::g')\n" done branches=$(printf '%s\n' "$branches" | sort | uniq)
@@ -456,17 +456,17 @@ EOM } checkout_branch() { - cd $sourcedir/$name + cd "$sourcedir/$name" # Check if a local branch already exists to track the remote branch. # If not then create a tracking branch and checkout the branch # else just checkout the existing branch - git branch | grep $branch > /dev/null + git branch | grep "$branch" > /dev/null if [ "$?" != "0" ] then - git checkout origin/$branch -b $branch --track + git checkout "origin/$branch" -b "$branch" --track else - git checkout $branch + git checkout "$branch" fi # Now that we are on the proper branch pull the remote branch changes if
@@ -476,14 +476,14 @@ checkout_branch() { if [ "$resethead" = "y" ] then # Instead of merging, reset to remote branch to avoid conflicts due to rebase - git reset --hard origin/$branch + git reset --hard "origin/$branch" else - git merge origin/$branch + git merge "origin/$branch" fi } checkout_commit() { - cd $sourcedir/$name + cd "$sourcedir/$name" if [ "$commit" != "HEAD" ] then git checkout $commit
@@ -492,7 +492,7 @@ checkout_commit() { get_repo_commit() { # prompt for what commit to use with HEAD as default - cd $sourcedir/$name + cd "$sourcedir/$name" cat << EOM
@@ -526,10 +526,10 @@ EOM } verify_layers() { - cd $sourcedir + cd "$sourcedir" for l in $repo_layers do - if [ ! -f $sourcedir/$l/conf/layer.conf ] + if [ ! -f "$sourcedir/$l/conf/layer.conf" ] then echo "ERROR: the $l layer in the $name repository could not be" echo " found. Bailing out."
@@ -543,7 +543,7 @@ save_layers() { # Add the repo layers to the layers list for l in $repo_layers do - layers="$layers""$sourcedir/$l " + layers="${layers}${sourcedir}/$l " done }
@@ -564,9 +564,9 @@ select_layers() { return fi - cd $sourcedir + cd "$sourcedir" # Get a count of how many layers there are - count=$(find $name -name "layer.conf" | grep -c layer.conf) + count=$(find "$name" -name "layer.conf" | grep -c layer.conf) case $count in 0 )
@@ -581,7 +581,7 @@ select_layers() { ;; esac - t_layers=$(find $name -name "layer.conf" | sed 's:\/conf\/layer.conf::') + t_layers=$(find "$name" -name "layer.conf" | sed 's:\/conf\/layer.conf::') if [ "$arg1" != "all" ] then
@@ -597,7 +597,7 @@ EOM for l in $t_layers do - printf '\t%s\n' "$(echo $l | sed "s:${name}\/::")" + printf '\t%s\n' "$(echo "$l" | sed "s:${name}\/::")" done cat << EOM
@@ -647,7 +647,7 @@ get_oecorelayerconf() { then OECORELAYERCONFPATH=$scriptdir/$OECORELAYERCONF - if [ ! -e $OECORELAYERCONFPATH ] + if [ ! -e "$OECORELAYERCONFPATH" ] then echo "ERROR: Could not find the specified layer conf file $OECORELAYERCONFPATH" fi
@@ -655,7 +655,7 @@ get_oecorelayerconf() { return fi - cd $sourcedir + cd "$sourcedir" confs=$(find . -name "bblayers.conf.sample") done="n"
@@ -683,7 +683,7 @@ EOM read input - if [ -e $input ] + if [ -e "$input" ] then done="y" OECORELAYERCONF=$input
@@ -701,7 +701,7 @@ get_oecorelocalconf() { then OECORELOCALCONFPATH=$scriptdir/$OECORELOCALCONF - if [ ! -e $OECORELOCALCONFPATH ] + if [ ! -e "$OECORELOCALCONFPATH" ] then echo "ERROR: Could not find the specified local conf file $OECORELOCALCONFPATH" exit 1
@@ -710,7 +710,7 @@ get_oecorelocalconf() { return fi - cd $sourcedir + cd "$sourcedir" confs=$(find . -name "local.conf.sample") done="n"
@@ -738,7 +738,7 @@ EOM read input - if [ -e $input ] + if [ -e "$input" ] then done="y" OECORELOCALCONF=$input
@@ -767,19 +767,19 @@ NOTE: Any additional entries to this file will be lost if the $0 EOM # First copy the template file - cp -f $OECORELAYERCONFPATH $confdir/bblayers.conf + cp -f "$OECORELAYERCONFPATH" "$confdir/bblayers.conf" # Now add the layers we have configured to the BBLAYERS variable -cat >> $confdir/bblayers.conf << EOM +cat >> "$confdir/bblayers.conf" << EOM # Layers configured by oe-core-setup script BBLAYERS += " \\ EOM for l in $layers do - printf '\t%s \\\n' "$l" >> $confdir/bblayers.conf + printf '\t%s \\\n' "$l" >> "$confdir/bblayers.conf" done - echo "\"" >> $confdir/bblayers.conf + echo "\"" >> "$confdir/bblayers.conf" }
@@ -800,20 +800,20 @@ NOTE: You will probably want to change the default MACHINE setting in the EOM - if [ -e $confdir/local.conf ] + if [ -e "$confdir/local.conf" ] then echo "WARNING: Found existing $confdir/local.conf" echo "Saving a backup to $confdir/local.conf.bak" - cp -f $confdir/local.conf $confdir/local.conf.bak + cp -f "$confdir/local.conf" "$confdir/local.conf.bak" fi # First copy the template file - cp -f $OECORELOCALCONFPATH $confdir/local.conf + cp -f "$OECORELOCALCONFPATH" "$confdir/local.conf" # Find if old DL_DIR was set - if [ -e $confdir/local.conf.bak ] + if [ -e "$confdir/local.conf.bak" ] then - old_dldir=$(cat $confdir/local.conf.bak | grep -e "^DL_DIR =" | sed 's|DL_DIR = ||' | sed 's/"//g') + old_dldir=$(cat "$confdir/local.conf.bak" | grep -e "^DL_DIR =" | sed 's|DL_DIR = ||' | sed 's/"//g') else old_dldir="$oebase/downloads" fi
@@ -824,30 +824,30 @@ EOM dldir=$old_dldir fi - sed -i "s|^DL_DIR.*|DL_DIR = \"${dldir}\"|" $confdir/local.conf + sed -i "s|^DL_DIR.*|DL_DIR = \"${dldir}\"|" "$confdir/local.conf" - if [ -e $oebase/tmp_append_local.conf ] + if [ -e "$oebase/tmp_append_local.conf" ] then - echo "" >> $confdir/local.conf - echo "#====================================================================" >> $confdir/local.conf - echo "# LOCALCONF: settings from config file:" >> $confdir/local.conf - echo "# $inputfile" >> $confdir/local.conf - echo "#" >> $confdir/local.conf - echo "# Do not remove." >> $confdir/local.conf - echo "#--------------------------------------------------------------------" >> $confdir/local.conf - cat $oebase/tmp_append_local.conf >> $confdir/local.conf - echo "#====================================================================" >> $confdir/local.conf - echo "" >> $confdir/local.conf - rm $oebase/tmp_append_local.conf + echo "" >> "$confdir/local.conf" + echo "#====================================================================" >> "$confdir/local.conf" + echo "# LOCALCONF: settings from config file:" >> "$confdir/local.conf" + echo "# $inputfile" >> "$confdir/local.conf" + echo "#" >> "$confdir/local.conf" + echo "# Do not remove." >> "$confdir/local.conf" + echo "#--------------------------------------------------------------------" >> "$confdir/local.conf" + cat "$oebase/tmp_append_local.conf" >> "$confdir/local.conf" + echo "#====================================================================" >> "$confdir/local.conf" + echo "" >> "$confdir/local.conf" + rm "$oebase/tmp_append_local.conf" fi } print_motd() { - if [ -e $oebase/tmp_motd ] + if [ -e "$oebase/tmp_motd" ] then echo "" - cat $oebase/tmp_motd + cat "$oebase/tmp_motd" echo "" fi }
@@ -866,7 +866,7 @@ print_image_names() { F_IMAGE_FOLDERS=$(find "${SOURCES}/${FOLDER}" -type d -a -iname images|grep recipes-core) for IMG_FOLDER in ${F_IMAGE_FOLDERS} do - F_IMAGES=$(find "${IMG_FOLDER}" -iname *.bb) + F_IMAGES=$(find "${IMG_FOLDER}" -iname '*.bb') if [ -n "${F_IMAGES}" ]; then for img in ${F_IMAGES} do
@@ -901,17 +901,17 @@ For example: Common targets are: EOM -print_image_names ${sourcedir} +print_image_names "${sourcedir}" # Write the setenv file -cat > $confdir/setenv << EOM +cat > "$confdir/setenv" << EOM # Set OEBASE to where the build and source directories reside # NOTE: Do NOT place a trailing / on the end of OEBASE. -export OEBASE=${oebase} +export OEBASE="${oebase}" # try to find out bitbake directory -BITBAKEDIR=\$(find \${OEBASE}/sources -name "*bitbake*") +BITBAKEDIR=\$(find "\${OEBASE}/sources" -name "*bitbake*") for f in \${BITBAKEDIR} do if [ -d \${f}/bin ]
@@ -922,7 +922,7 @@ done # check for any scripts directories in the top-level of the repos and add those # to the PATH -SCRIPTS=\$(find \${OEBASE}/sources -maxdepth 2 -name "scripts" -type d) +SCRIPTS=\$(find "\${OEBASE}/sources" -maxdepth 2 -name "scripts" -type d) for s in \${SCRIPTS} do PATH="\${s}:\$PATH"
@@ -931,13 +931,13 @@ done unset BITBAKEDIR unset SCRIPTS export PATH -export BUILDDIR=${builddir} +export BUILDDIR="${builddir}" EOM if [ "$BITBAKE_INCLUSIVE_VARS" = "no" ]; then - echo "export BB_ENV_EXTRAWHITE=\"MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE\"" >> $confdir/setenv + echo "export BB_ENV_EXTRAWHITE=\"MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE\"" >> "$confdir/setenv" else - echo "export BB_ENV_PASSTHROUGH_ADDITIONS=\"MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE\"" >> $confdir/setenv + echo "export BB_ENV_PASSTHROUGH_ADDITIONS=\"MACHINE DISTRO TCMODE TCLIBC http_proxy ftp_proxy https_proxy all_proxy ALL_PROXY no_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS PARALLEL_MAKE GIT_PROXY_COMMAND GIT_PROXY_IGNORE SOCKS5_PASSWD SOCKS5_USER OEBASE META_SDK_PATH TOOLCHAIN_TYPE TOOLCHAIN_BRAND TOOLCHAIN_BASE TOOLCHAIN_PATH TOOLCHAIN_PATH_ARMV5 TOOLCHAIN_PATH_ARMV7 TOOLCHAIN_PATH_ARMV8 EXTRA_TISDK_FILES TISDK_VERSION ARAGO_BRAND ARAGO_RT_ENABLE ARAGO_SYSTEST_ENABLE ARAGO_KERNEL_SUFFIX TI_SECURE_DEV_PKG_CAT TI_SECURE_DEV_PKG_AUTO TI_SECURE_DEV_PKG_K3 ARAGO_SYSVINIT SYSFW_FILE ARAGO_JAILHOUSE_ENABLE\"" >> "$confdir/setenv" fi }
@@ -945,13 +945,13 @@ EOM build_repo_line() { # clean up the layers to remove the repository name and add : divider temp_layers="" - for l in $(echo $repo_layers | sed "s:${name}::" | sed -e 's:^\/::') + for l in $(echo "$repo_layers" | sed "s:${name}::" | sed -e 's:^\/::') do - temp_layers="$temp_layers""$(echo $l | sed "s:${name}\/::"):" + temp_layers="${temp_layers}$(echo "$l" | sed "s:${name}\/::"):" done # Lastly clean off any trailing : - temp_layers=$(echo $temp_layers | sed 's/:$//') + temp_layers=$(echo "$temp_layers" | sed 's/:$//') echo "$name,$uri,$branch,$commit,layers=$temp_layers" }
@@ -975,11 +975,11 @@ do done # create passed in directory if it doesn't exist -mkdir -p $oebase +mkdir -p "$oebase" # retrive the absolute path to the oebase directory incase # a relative path is passed in -cd $oebase +cd "$oebase" oebase=$(pwd) cd -
@@ -1022,7 +1022,7 @@ then repo_line=$(build_repo_line) # Save the line in the output variable for if we create an output file - output="$output""$repo_line\n" + output="${output}${repo_line}\n" save_layers
@@ -1042,13 +1042,13 @@ config_oecorelocalconf if [ -n "$outputfile" ] then # make sure that the directory for the output file exists - cd $oebase - dir=$(dirname $outputfile) - if [ ! -d $dir ] + cd "$oebase" + dir=$(dirname "$outputfile") + if [ ! -d "$dir" ] then - mkdir -p $dir + mkdir -p "$dir" fi - printf '%s\n' "$output" > $outputfile + printf '%s\n' "$output" > "$outputfile" echo "Output file is $outputfile" fi
Signature · 1 line
2.41.0
PATCH v2 6/16 oe-layertool-setup: only invoke read with -r
In reply to Randolph SappShellcheck:
read without -r will mangle backslashes.
--- oe-layertool-setup.sh | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
oe-layertool-setup.sh +9 -9
@@ -246,7 +246,7 @@ parse_input_file() { rm "$oebase/tmp_motd" fi - while read line + while read -r line do # clean the parsing variables for each run name=""
@@ -434,7 +434,7 @@ $branches What branch would you like to checkout for the $name repository? EOM - read input + read -r input # check that the branch is in the list of branches # NOTE: using a for loop here because I want exact matches.
@@ -517,7 +517,7 @@ You can either select one of these tags or specify your own commit SHA sum, or press ENTER to use the HEAD of the current branch. EOM - read input + read -r input if [ -z "$input" ] then
@@ -606,7 +606,7 @@ Please provide the list of layers you wish to use as a space separated list, or press enter to use all of the layers. EOM - read input + read -r input fi if [ -z "$input" ]
@@ -625,7 +625,7 @@ cat << EOM What is the name of the repository you want to configure? EOM - read name + read -r name }
@@ -637,7 +637,7 @@ cat << EOM What is the git clone uri of the $name repository? EOM - read uri + read -r uri }
@@ -681,7 +681,7 @@ Please select one of the above sample files to use as a template for configuring your build environment. EOM - read input + read -r input if [ -e "$input" ] then
@@ -736,7 +736,7 @@ Please select one of the above sample files to use as a template for configuring your build environment. EOM - read input + read -r input if [ -e "$input" ] then
@@ -1029,7 +1029,7 @@ then echo "" echo "" echo "Would you like to configure another repository? [y/n] " - read cont + read -r cont done fi
Signature · 1 line
2.41.0
PATCH v2 7/16 oe-layertool-setup: check exit code directly
In reply to Randolph SappShellcheck:
Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
--- oe-layertool-setup.sh | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-)
oe-layertool-setup.sh +9 -20
@@ -262,15 +262,13 @@ parse_input_file() { fi # Skip comment lines - echo "$line" | grep -e "^#" > /dev/null - if [ "$?" = "0" ] + if echo "$line" | grep -q -e "^#" then continue fi # If the line starts with OECORE then parse the OECORE setting - echo "$line" | grep -e "^OECORE.*=" > /dev/null - if [ "$?" = "0" ] + if echo "$line" | grep -q -e "^OECORE.*=" then parse_oecore_line "$line" output="${output}${line}\n"
@@ -278,8 +276,7 @@ parse_input_file() { fi # If the line starts with BITBAKE then parse the BITBAKE setting - echo "$line" | grep -e "^BITBAKE.*=" > /dev/null - if [ "$?" = "0" ] + if echo "$line" | grep -q -e "^BITBAKE.*=" then parse_bitbake_line "$line" output="${output}${line}\n"
@@ -287,8 +284,7 @@ parse_input_file() { fi # If the line starts with LOCALCONF: then parse the LOCALCONF: setting - echo "$line" | grep -e "^LOCALCONF:.*" > /dev/null - if [ "$?" = "0" ] + if echo "$line" | grep -q -e "^LOCALCONF:.*" then parse_localconf_line "$line" output="${output}${line}\n"
@@ -296,8 +292,7 @@ parse_input_file() { fi # If the line starts with MOTD: then parse the MOTD: setting - echo "$line" | grep -e "^MOTD:.*" > /dev/null - if [ "$?" = "0" ] + if echo "$line" | grep -q -e "^MOTD:.*" then parse_motd_line "$line" continue
@@ -307,11 +302,9 @@ parse_input_file() { # it is a repository information line and parse it parse_repo_line "$line" - configure_repo - # if the return from configure repo was non-zero then do not save # the output - if [ "$?" != "0" ] + if ! configure_repo then continue fi
@@ -398,8 +391,7 @@ clone_repo() { cd "$sourcedir/$name" "$scriptdir/git_retry.sh" fetch --all else - "$scriptdir/git_retry.sh" clone "$uri" "$sourcedir/$name" - if [ "$?" != "0" ] + if ! "$scriptdir/git_retry.sh" clone "$uri" "$sourcedir/$name" then echo "ERROR: Could not clone repository at $uri" exit 1
@@ -461,8 +453,7 @@ checkout_branch() { # Check if a local branch already exists to track the remote branch. # If not then create a tracking branch and checkout the branch # else just checkout the existing branch - git branch | grep "$branch" > /dev/null - if [ "$?" != "0" ] + if git branch | grep -q "$branch" then git checkout "origin/$branch" -b "$branch" --track else
@@ -1009,9 +1000,7 @@ then commit="" repo_layers="" - configure_repo - - if [ "$?" != "0" ] + if ! configure_repo then continue fi
Signature · 1 line
2.41.0
PATCH v2 8/16 oe-layertool-setup: guard all cd calls
In reply to Randolph SappMake the scrip exit early if any cd calls fail in the main process. Return 1 in the case a function fails to cd.
--- oe-layertool-setup.sh | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-)
oe-layertool-setup.sh +12 -13
@@ -386,9 +386,8 @@ configure_repo() { clone_repo() { # check if the repo already exists. if so then fetch the latest updates, # else clone it - if [ -d "$sourcedir/$name" ] + if cd "$sourcedir/$name" 2> /dev/null then - cd "$sourcedir/$name" "$scriptdir/git_retry.sh" fetch --all else if ! "$scriptdir/git_retry.sh" clone "$uri" "$sourcedir/$name"
@@ -405,7 +404,7 @@ get_repo_branch() { while [ "$found" = "0" ] do - cd "$sourcedir/$name" + cd "$sourcedir/$name" || return 1 # Get a unique list of branches for the user to chose from # Also delete the origin/HEAD line that the -r option returns
@@ -448,7 +447,7 @@ EOM } checkout_branch() { - cd "$sourcedir/$name" + cd "$sourcedir/$name" || return 1 # Check if a local branch already exists to track the remote branch. # If not then create a tracking branch and checkout the branch
@@ -474,7 +473,7 @@ checkout_branch() { } checkout_commit() { - cd "$sourcedir/$name" + cd "$sourcedir/$name" || return 1 if [ "$commit" != "HEAD" ] then git checkout $commit
@@ -483,7 +482,7 @@ checkout_commit() { get_repo_commit() { # prompt for what commit to use with HEAD as default - cd "$sourcedir/$name" + cd "$sourcedir/$name" || return 1 cat << EOM
@@ -517,7 +516,7 @@ EOM } verify_layers() { - cd "$sourcedir" + cd "$sourcedir" || return 1 for l in $repo_layers do if [ ! -f "$sourcedir/$l/conf/layer.conf" ]
@@ -555,7 +554,7 @@ select_layers() { return fi - cd "$sourcedir" + cd "$sourcedir" || return 1 # Get a count of how many layers there are count=$(find "$name" -name "layer.conf" | grep -c layer.conf)
@@ -646,7 +645,7 @@ get_oecorelayerconf() { return fi - cd "$sourcedir" + cd "$sourcedir" || return 1 confs=$(find . -name "bblayers.conf.sample") done="n"
@@ -701,7 +700,7 @@ get_oecorelocalconf() { return fi - cd "$sourcedir" + cd "$sourcedir" || return 1 confs=$(find . -name "local.conf.sample") done="n"
@@ -970,9 +969,9 @@ mkdir -p "$oebase" # retrive the absolute path to the oebase directory incase # a relative path is passed in -cd "$oebase" +cd "$oebase" || exit 1 oebase=$(pwd) -cd - +cd - || exit 1 # Populate the following variables depending on the value of oebase sourcedir="$oebase/sources"
@@ -1031,7 +1030,7 @@ config_oecorelocalconf if [ -n "$outputfile" ] then # make sure that the directory for the output file exists - cd "$oebase" + cd "$oebase" || exit 1 dir=$(dirname "$outputfile") if [ ! -d "$dir" ] then
Signature · 1 line
2.41.0
PATCH v2 9/16 oe-layertool-setup: eliminate useless cat
In reply to Randolph SappEliminate useless cat into grep.
--- oe-layertool-setup.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
oe-layertool-setup.sh +1 -1
@@ -803,7 +803,7 @@ EOM # Find if old DL_DIR was set if [ -e "$confdir/local.conf.bak" ] then - old_dldir=$(cat "$confdir/local.conf.bak" | grep -e "^DL_DIR =" | sed 's|DL_DIR = ||' | sed 's/"//g') + old_dldir=$(grep -e "^DL_DIR =" "$confdir/local.conf.bak" | sed 's|DL_DIR = ||' | sed 's/"//g') else old_dldir="$oebase/downloads" fi
Signature · 1 line
2.41.0
PATCH v2 10/16 oe-layertool-setup: use subshell execution with redirect
In reply to Randolph SappShellcheck:
Consider using { cmd1; cmd2; } >> file instead of individual redirects.
--- oe-layertool-setup.sh | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
oe-layertool-setup.sh +12 -10
@@ -818,16 +818,18 @@ EOM if [ -e "$oebase/tmp_append_local.conf" ] then - echo "" >> "$confdir/local.conf" - echo "#====================================================================" >> "$confdir/local.conf" - echo "# LOCALCONF: settings from config file:" >> "$confdir/local.conf" - echo "# $inputfile" >> "$confdir/local.conf" - echo "#" >> "$confdir/local.conf" - echo "# Do not remove." >> "$confdir/local.conf" - echo "#--------------------------------------------------------------------" >> "$confdir/local.conf" - cat "$oebase/tmp_append_local.conf" >> "$confdir/local.conf" - echo "#====================================================================" >> "$confdir/local.conf" - echo "" >> "$confdir/local.conf" + { + echo ""; + echo "#===================================================================="; + echo "# LOCALCONF: settings from config file:"; + echo "# $inputfile"; + echo "#"; + echo "# Do not remove."; + echo "#--------------------------------------------------------------------"; + cat "$oebase/tmp_append_local.conf"; + echo "#===================================================================="; + echo ""; + } >> "$confdir/local.conf" rm "$oebase/tmp_append_local.conf" fi }
Signature · 1 line
2.41.0
PATCH v2 11/16 oe-layertool-setup: guard against invalid expression in case
In reply to Randolph SappGuard against and invalid expression in the main option case statement.
--- oe-layertool-setup.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
oe-layertool-setup.sh +1 -1
@@ -962,7 +962,7 @@ do o ) outputfile="$OPTARG";; d ) dldir="$OPTARG";; b ) oebase="$OPTARG";; - h ) usage;; + * ) usage;; esac done
Signature · 1 line
2.41.0
PATCH v2 13/16 oe-layertool-setup: drop unused variable
In reply to Randolph SappDrop the unused IMAGES variable.
--- oe-layertool-setup.sh | 1 - 1 file changed, 1 deletion(-)
oe-layertool-setup.sh +0 -1
@@ -848,7 +848,6 @@ print_motd() { print_image_names() { SOURCES="${1}" FOLDERS=$(find "${SOURCES}" -type d -a -iname images|grep recipes-core|sed -e "s/.*sources\///g"|cut -d '/' -f1|sort -u -r) - IMAGES="" for FOLDER in ${FOLDERS} do RECO=""
Signature · 1 line
2.41.0
PATCH v2 14/16 oe-layertool-setup: add a path sanity check for oebase
In reply to Randolph SappOEBase can not have a space in it's name due to parsing limitations of POSIX shell. Make sure to check this before doing anything.
--- oe-layertool-setup.sh | 8 ++++++++ 1 file changed, 8 insertions(+)
oe-layertool-setup.sh +8 -0
@@ -966,6 +966,14 @@ do esac done +# add early sanity check +if printf '%s\n' "$oebase" | grep -q '\s' +then + printf '%s\n' "OE-Base path has whitespace characters in it's path!" \ + "This is currently unsupported." ; + exit 1 +fi + # create passed in directory if it doesn't exist mkdir -p "$oebase"
Signature · 1 line
2.41.0
PATCH v2 15/16 oe-layertool-setup: fix multi-line printfs
In reply to Randolph SappReplace multiple printf calls with one call and a good format.
--- oe-layertool-setup.sh | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-)
oe-layertool-setup.sh +20 -20
@@ -347,10 +347,10 @@ configure_repo() { get_repo_uri fi - printf '%s\n' "" - printf '%s\n' "" - printf '%s\n' "cloning repo $name" - printf '%s\n' "" + printf '%s\n' "" \ + "" \ + "cloning repo $name" \ + "" ; clone_repo
@@ -522,8 +522,8 @@ verify_layers() { do if [ ! -f "$sourcedir/$l/conf/layer.conf" ] then - printf '%s\n' "ERROR: the $l layer in the $name repository could not be" - printf '%s\n' " found. Bailing out." + printf '%s\n' "ERROR: the $l layer in the $name repository could not be" \ + " found. Bailing out." ; exit 1 fi done
@@ -793,8 +793,8 @@ EOM if [ -e "$confdir/local.conf" ] then - printf '%s\n' "WARNING: Found existing $confdir/local.conf" - printf '%s\n' "Saving a backup to $confdir/local.conf.bak" + printf '%s\n' "WARNING: Found existing $confdir/local.conf" \ + "Saving a backup to $confdir/local.conf.bak"; cp -f "$confdir/local.conf" "$confdir/local.conf.bak" fi
@@ -820,16 +820,16 @@ EOM if [ -e "$oebase/tmp_append_local.conf" ] then { - printf '%s\n' ""; - printf '%s\n' "#===================================================================="; - printf '%s\n' "# LOCALCONF: settings from config file:"; - printf '%s\n' "# $inputfile"; - printf '%s\n' "#"; - printf '%s\n' "# Do not remove."; - printf '%s\n' "#--------------------------------------------------------------------"; + printf '%s\n' "" \ + "#====================================================================" \ + "# LOCALCONF: settings from config file:" \ + "# $inputfile" \ + "#" \ + "# Do not remove." \ + "#--------------------------------------------------------------------" ; cat "$oebase/tmp_append_local.conf"; - printf '%s\n' "#===================================================================="; - printf '%s\n' ""; + printf '%s\n' "#====================================================================" \ + "" ; } >> "$confdir/local.conf" rm "$oebase/tmp_append_local.conf" fi
@@ -1024,9 +1024,9 @@ then save_layers - printf '%s\n' "" - printf '%s\n' "" - printf '%s\n' "Would you like to configure another repository? [y/n] " + printf '%s\n' "" \ + "" ; + printf '%s' "Would you like to configure another repository? [y/n] " read -r cont done fi
Signature · 1 line
2.41.0
PATCH v2 16/16 oe-layertool-setup: add sanity check for layer names
In reply to Randolph SappDue to POSIX shell string parsing limitations we currently can't parse layer names with spaces. Display an error message and bail out when detected.
--- oe-layertool-setup.sh | 7 +++++++ 1 file changed, 7 insertions(+)
oe-layertool-setup.sh +7 -0
@@ -211,6 +211,13 @@ parse_repo_line() { then temp_layers="" temp=$(printf '%s\n' "$parsed_layers" | cut -d= -f2) + # sanity check for whitespace in layer names string + if printf '%s\n' "$temp" | grep -q '\s' + then + printf '%s\n' "Whitespace character detected in layer names string!" \ + "This is currently unsupported." ; + exit 1 + fi # use tr to split the layers since we assume layer names don't have # whitespace characters later anyway for x in $(printf '%s\n' "$temp" | tr ':' ' ')
Signature · 1 line
2.41.0
Quoted 21 lines · PRC Automation
oe-layersetup / na / 20230614034507.598391-1-res.sapp
PRC Results: FAIL
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
apply-patch: FAIL
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Summary:
- Patch Series: [oe-layersetup][PATCHv2 00/16] Sacrifice your first born to the linter
- Submitter: From: Randolph Sapp <[email protected]>
- Date: Date: Tue, 13 Jun 2023 22:44:51 -0500
- Num Patches: 16
- Mailing List (public inbox) Commit SHA:5a49bf112d3685aeb2f6e7b0a0c6f5b45e440e23Applied to:
- Repository:
- Base Branch:
- Commit Author:
- Commit Subject:
- Commit SHA:
Quoted 8 lines
Patches
----------------------------------------
FAIL - [oe-layersetup][PATCHv2 01/16] oe-layertool-setup: split logic and/or expressions
fatal: not a git repository (or any parent up to mount point /scratch) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEMnot set).
How far back are you going with this test?
Quoted 33 lines · Randolph Sapp
Quoted 23 lines · PRC Automation
oe-layersetup / na / 20230614034507.598391-1-res.sapp
PRC Results: FAIL
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
apply-patch: FAIL
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Summary:
- Patch Series: [oe-layersetup][PATCHv2 00/16] Sacrifice your first born to the linter
- Submitter: From: Randolph Sapp <[email protected]>
- Date: Date: Tue, 13 Jun 2023 22:44:51 -0500
- Num Patches: 16
- Mailing List (public inbox) Commit SHA:5a49bf112d3685aeb2f6e7b0a0c6f5b45e440e23Applied to:
- Repository:
- Base Branch:
- Commit Author:
- Commit Subject:
- Commit SHA:Quoted 8 lines
Patches
----------------------------------------
FAIL - [oe-layersetup][PATCHv2 01/16] oe-layertool-setup: split logic and/or expressions
fatal: not a git repository (or any parent up to mount point /scratch) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEMnot set).
Quoted 1 line
How far back are you going with this test?
Doh! No one should have been getting these emails...
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
Quoted 34 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 31 lines · Randolph Sapp
Quoted 29 lines · PRC Automation
oe-layersetup / na / 20230614034507.598391-1-res.sapp
PRC Results: FAIL
Summary:
- Patch Series: [oe-layersetup][PATCHv2 00/16] Sacrifice your first born to the linter
- Submitter: From: Randolph Sapp <[email protected]>
- Date: Date: Tue, 13 Jun 2023 22:44:51 -0500
- Num Patches: 16
- Mailing List (public inbox) Commit SHA:5a49bf112d3685aeb2f6e7b0a0c6f5b45e440e23Applied to:
- Repository:
- Base Branch:
- Commit Author:
- Commit Subject:
- Commit SHA:Patches
----------------------------------------
FAIL - [oe-layersetup][PATCHv2 01/16] oe-layertool-setup: split logic and/or expressions
fatal: not a git repository (or any parent up to mount point /scratch) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEMnot set).
Quoted 4 lines
Quoted 1 line
How far back are you going with this test?
Doh! No one should have been getting these emails...
I think I see the issue... I've turned it off while I fix it.
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS