board: ti: am6x: Switch to standard boot
cover board: ti: am6x: Switch to standard boot
Hi,
This series switches am64x to standard boot flow.
Also minor fix to am62x boot targets.
NOTE:
Tested on AM64x GP EVM but I had to hand edit the grub.cfg file provided with the TI release [1]
from,
menuentry 'boot'{
linux /Image root=PARTUUID=3a4a99a8-02 rootwait rootfstype=ext4 }
to,
menuentry 'boot'{
linux /Image console=ttyS2,115200n8 root=PARTUUID=3a4a99a8-02 rootwait rootfstype=ext4 }
else there is no console output.
cheers,
-roger
Roger Quadros (2):
board: ti: am62x: am62x.env: Fix boot_targets
board: ti: am64x: Switch to standard boot flow
board/ti/am62x/am62x.env | 2 +- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 2 -- 4 files changed, 5 insertions(+), 5 deletions(-)
base-commit: 90c81f407dd4a7747385b10f9b8f732202c45cde
prerequisite-patch-id: afb49f33f198747451687f83936f039049365924
prerequisite-patch-id: 1d8297eb0a3b44d8578cae785cc22f0fb6077239
prerequisite-patch-id: 4ae9fdc0b3737e55289a78a59d546a08c03d62e5
prerequisite-patch-id: 2be0e0caf153bec2c453b2f21342ba207c1ee13d
prerequisite-patch-id: 7710703ce9a41b72ff3fb89abf0823625a5b5454
prerequisite-patch-id: 60d61440bf0ab8c0bea8b971ef18aa6d0d26e113
prerequisite-patch-id: c974e6d80489cbb0ee8cc1f3e19bcc9cf47f25b6
Signature · 1 line
2.34.1
PATCH 1/2 board: ti: am62x: am62x.env: Fix boot_targets
ti_mmc is not a valid boot_target for standard boot flow so remove it. Prefer mmc1 (sd-card) over mmc0 (emmc).
--- board/ti/am62x/am62x.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/ti/am62x/am62x.env +1 -1
@@ -8,7 +8,7 @@ args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} -boot_targets=ti_mmc mmc0 mmc1 usb pxe dhcp +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2
Signature · 1 line
2.34.1
PATCH 2/2 board: ti: am64x: Switch to standard boot flow
In reply to Roger QuadrosSwitch to using bootstd. Note with this change, we will stop using distro_bootcmd and instead depend entirely on bootflow method of starting the system up.
--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 2 -- 3 files changed, 4 insertions(+), 4 deletions(-)
board/ti/am64x/am64x.env +1 -0
@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2
configs/am64x_evm_a53_defconfig +3 -2
@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
include/configs/am64x_evm.h +0 -2
@@ -10,8 +10,6 @@#define __CONFIG_AM642_EVM_H#include <linux/sizes.h> -#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> #include <asm/arch/am64_hardware.h> #include <env/ti/k3_dfu.h>
Signature · 1 line
2.34.1
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Roger QuadrosQuoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow so
Is there some way to make it into a valid boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?
Andrew
Quoted 20 lines
remove it. Prefer mmc1 (sd-card) over mmc0 (emmc).
Signed-off-by Roger Quadros <[email protected]>--- board/ti/am62x/am62x.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/ti/am62x/am62x.env +1
-1@@ -8,7 +8,7 @@ args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} -boot_targets=ti_mmc mmc0 mmc1 usb pxe dhcp +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?
envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)
Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 22 lines
Andrew
Quoted 19 lines
remove it. Prefer mmc1 (sd-card) over mmc0 (emmc).
Signed-off-by Roger Quadros <[email protected]>--- board/ti/am62x/am62x.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/ti/am62x/am62x.env +1
-1@@ -8,7 +8,7 @@ args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} -boot_targets=ti_mmc mmc0 mmc1 usb pxe dhcp +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 2/2] board: ti: am64x: Switch to standard boot flow
In reply to Roger QuadrosQuoted 46 lines · Roger Quadros
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmdand instead depend entirely on bootflow method of starting the system up.Signed-off-by Roger Quadros <[email protected]>--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 2 -- 3 files changed, 4 insertions(+), 4 deletions(-)board/ti/am64x/am64x.env +1
-0@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2configs/am64x_evm_a53_defconfig +3
-2@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=yinclude/configs/am64x_evm.h +0
-0
include/configs/am64x_evm.h line 12
Quoted 3 lines
include/configs/am64x_evm.h +0
-0@@ -10,8 +10,6 @@#define __CONFIG_AM642_EVM_H#include <linux/sizes.h>
Do we really need this?
include/configs/am64x_evm.h line 13
Quoted 3 lines
include/configs/am64x_evm.h +0
-2-#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> #include <asm/arch/am64_hardware.h>
OR this?
include/configs/am64x_evm.h line 14
Quoted 1 line
include/configs/am64x_evm.h +0
-0#include <env/ti/k3_dfu.h>
you dont need k3_dfu.h either. the env setup is already in board/ti/am64x/am64x.env (k3_dfu.env)
and we dont seem to be using CFG_SYS_SDRAM_BASE1
might be that we could reduce it down to am62x_evm.h ?
Quoted 4 lines
Signature · 2 lines
-- 2.34.1
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Roger QuadrosQuoted 4 lines · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow so remove it. Prefer mmc1 (sd-card) over mmc0 (emmc).Signed-off-by Roger Quadros <[email protected]>
Quoted 20 lines
--- board/ti/am62x/am62x.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/ti/am62x/am62x.env +1
-1@@ -8,7 +8,7 @@ args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} -boot_targets=ti_mmc mmc0 mmc1 usb pxe dhcp +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2Signature · 1 line
2.34.1
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Nishanth MenonQuoted 4 lines · Nishanth Menon
Quoted 3 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow so
Quoted 8 lines
Quoted 2 lines
Is there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Andrew
Quoted 23 lines
Quoted 22 lines
Andrew
Quoted 19 lines
remove it. Prefer mmc1 (sd-card) over mmc0 (emmc).
Signed-off-by Roger Quadros <[email protected]>--- board/ti/am62x/am62x.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/ti/am62x/am62x.env +1
-1@@ -8,7 +8,7 @@ args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} -boot_targets=ti_mmc mmc0 mmc1 usb pxe dhcp +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 8 lines · Andrew Davis
Quoted 7 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?
Quoted 8 lines
Quoted 5 lines
envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via boot/bootmeth_something.c ? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).
Signature · 1 line
Tom
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).
Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early remote_proc loading which is done for J7* platforms.
How that is initiated as part of bootmethods is something of a gap.
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).
Ideally, we should just have CONFIG_BOOTCOMMAND="bootflow scan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".
I forgot to add: FIT image authenticated boot flow. That is really what ti_mmc distroboot method was trying to solve.
Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 38 lines · Nishanth Menon
Quoted 37 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).
Quoted 8 lines
Quoted 3 lines
Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.
Right, FIT (and remote proc loading) are handled in ti_mmc, and this is the patch removing that (so I do believe I am complaining on the right patch here). I know that needs removed before we switch to stdboot, but we cant remove it until someone has the the alternative in place.
Simply dropping it and hoping someone else comes along later and re-adds the features isn't a good idea. Even if, as said above, the plumbing we need should already exist, it needs done first.
Andrew
Quoted 3 lines
Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Nishanth MenonHi Nishanth,
Quoted 44 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".
Quoted 5 lines
I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Yes you can use FIT configuration verification and things should work as normal.
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Andrew DavisQuoted 48 lines · Andrew Davis
Quoted 38 lines · Nishanth Menon
Quoted 37 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Quoted 8 lines
Quoted 3 lines
Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.
Quoted 8 lines
Right, FIT (and remote proc loading) are handled in
ti_mmc, and this is the patch removing that (so I do believe I am complaining on the right patch here). I know that needs removed before we switch to stdboot, but we cant remove it until someone has the the alternative in place.Simply dropping it and hoping someone else comes along later and re-adds the features isn't a good idea. Even if, as said above, the plumbing we need should already exist, it needs done first.
As simon stated:
https://lore.kernel.org/all/CAPnjgZ1fnqgk5W_8-jkJL1keXGM4CfnK-jPnFtQcFcV+y89+cA@mail.gmail.com/
FIT is already supported.
remoteproc support was not yet added for am62.. so there is no real regression, that said, even then, it can still be handled by envboot till we solve that aspect. There is no real reason to hold back stdboot as the standardization is very valuable at this point.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Simon GlassHi Simon,
Quoted 47 lines · Simon Glass
Hi Nishanth,
Quoted 44 lines · Nishanth Menon
Quoted 40 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".
Quoted 8 lines
Quoted 5 lines
I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Yes you can use FIT configuration verification and things should work as normal.
It there any reference to look at on how this is done? Thanks.
Signature · 2 lines
cheers, -roger
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Simon GlassHi Simon,
Quoted 47 lines · Simon Glass
Hi Nishanth,
Quoted 44 lines · Nishanth Menon
Quoted 40 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".
Quoted 8 lines
Quoted 5 lines
I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
Regards,
Manorit
Quoted 2 lines
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 53 lines · Manorit Chawdhry
Hi Simon,
Quoted 50 lines · Simon Glass
Hi Nishanth,
Quoted 47 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with doc/usage/fit/beaglebone_vboot.rst
Signature · 1 line
Tom
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rst
From that doc:
```
Boot the board using the commands below::
setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
ext2load mmc 0:2 82000000 /boot/image.fit
bootm 82000000
```This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
* fetching and applying FIT overlay/config strings
* remote proc loading
* uEnv.txt processing
Last two can be solved by adding to CONFIG_BOOTCOMMAND before calling bootflow scan as suggested above. Until we figure out the first two I don't see us ready to switch.
Andrew
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Hi Andrew,
Quoted 77 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```
Quoted 4 lines
This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
What does this mean? Can you please be more specific or give an example?
Quoted 1 line
* fetching and applying FIT overlay/config strings
Re overlays, is this the 'extension' command? What are config strings?
Quoted 1 line
* remote proc loading
What command can do this?
Quoted 1 line
* uEnv.txt processing
What command can do this?
Quoted 3 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.
I'm happy to help figure this out.
Regards,
SImon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 80 lines · Simon Glass
Hi Andrew,
Quoted 77 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow soIs there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```
Quoted 7 lines
Quoted 4 lines
This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
Quoted 4 lines
Quoted 1 line
* fetching and applying FIT overlay/config strings
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
Quoted 4 lines
Quoted 1 line
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
Quoted 4 lines
Quoted 1 line
* uEnv.txt processing
What command can do this?
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
Quoted 6 lines
Quoted 3 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
Andrew
Quoted 2 lines
Regards,
SImon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Hi Simon,
Quoted 129 lines · Andrew Davis
Quoted 80 lines · Simon Glass
Hi Andrew,
Quoted 77 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmc is not a valid boot_target for standard boot flow so
Is there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```Quoted 7 lines
Quoted 4 lines
This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
Quoted 4 lines
Quoted 1 line
* fetching and applying FIT overlay/config strings
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
Quoted 4 lines
Quoted 1 line
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
Quoted 4 lines
Quoted 1 line
* uEnv.txt processing
What command can do this?
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
Quoted 4 lines
Quoted 3 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.
Quoted 7 lines
Quoted 2 lines
I'm happy to help figure this out.
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
Andrew
Any nudges on the Andrew's response as to where we can look for all this or how can we maybe move towards all this?
Regards,
Manorit
Quoted 3 lines
Quoted 3 lines
Regards,
SImon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Hi Manorit,
Quoted 136 lines · Manorit Chawdhry
Hi Simon,
Quoted 132 lines · Andrew Davis
Quoted 80 lines · Simon Glass
Hi Andrew,
Quoted 77 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
On 10/4/23 8:23 AM, Roger Quadros wrote:
ti_mmc is not a valid boot_target for standard boot flow soIs there some way to make it into a valid boot_target? Otherwise
how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```Quoted 7 lines
Quoted 4 lines
This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
Quoted 4 lines
Quoted 1 line
* fetching and applying FIT overlay/config strings
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
Quoted 4 lines
Quoted 1 line
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
Quoted 4 lines
Quoted 1 line
* uEnv.txt processing
What command can do this?
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
Quoted 6 lines
Quoted 3 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Quoted 7 lines
Quoted 4 lines
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
Andrew
Any nudges on the Andrew's response as to where we can look for all this or how can we maybe move towards all this?
Yes I have taken a look at a possible design...I will reply soon.
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Andrew DavisHi Andrew,
Quoted 87 lines · Andrew Davis
Quoted 85 lines · Simon Glass
Hi Andrew,
Quoted 81 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
Quoted 1 line · Roger Quadros
ti_mmc is not a valid boot_target for standard boot flow so
Is there some way to make it into a valid
boot_target? Otherwise how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
Quoted 7 lines
Quoted 2 lines
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
We could have something like:
bootstd {
image-types = "fit", "uimage";
}
to limit the supported types.
Quoted 4 lines
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
How about:
bootstd {
scan-order = "bootmeth,bootdev"; // instead of default "bootdev,bootmeth";
};
Quoted 11 lines
Quoted 5 lines
Quoted 2 lines
* fetching and applying FIT overlay/config strings
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
My proposal for this is to implement extensions in FIT. This would have a new extensions nodes, so you can specify what extensions are available for each FIT configuration.
configurations {
conf-1 {
compatible = ...
extensions = "ext1", "ext-2";
};
extensions {
ext-1 {
fdto = "fdt-1"; // fdt overlay for this 'cape'
compatible = "vendor,combined-device1";
extensions = "ext3";};
ext-2 {
fdto = "fdto-2"; // fdt overlay for this 'cape'
compatible = "vendor,device2";
};
ext-3 {
fdto = "fdto-3";
compatible = "vendor,device3";
};So FIT configurations now have a list of supported extensions. The extensions are hierarchical so that you can have ext1 which can optionally have ext-2 as well. This allows boards which share a lot of 'capes' to be specified only ones.
Extensions actually present are declared by a sysinfo driver for the board, with new methods:
get_compat() - determine the compatible strings for the current platform get_ext() - get a list of compatible strings for extensions which are actually present
The extension compatible strings are used to select the correct things from the FIT, apply the overlays and produce the final DT.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
This could be a new property in bootstd:
bootstd: {
probe-before = <&phandle of remoteproc>, ...
};
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
* uEnv.txt processing
What command can do this?
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
This could be a new bootmeth which looks for uenv.txt on available devices. It might be better to put the env in a FIT or something with a checksum.
Quoted 10 lines
Quoted 7 lines
Quoted 4 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Hi,
Quoted 193 lines · Simon Glass
Hi Andrew,
Quoted 87 lines · Andrew Davis
Quoted 85 lines · Simon Glass
Hi Andrew,
Quoted 81 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
Quoted 5 lines · Andrew Davis
On 10/4/23 8:23 AM, Roger Quadros wrote:
ti_mmc is not a valid boot_target for standard boot flow soIs there some way to make it into a valid boot_target? Otherwise
how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan -lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
Quoted 7 lines
Quoted 2 lines
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
We could have something like:
bootstd { image-types = "fit", "uimage"; }to limit the supported types.
Quoted 4 lines
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
How about:
bootstd { scan-order = "bootmeth,bootdev"; // instead of default "bootdev,bootmeth"; };Quoted 11 lines
Quoted 5 lines
Quoted 2 lines
* fetching and applying FIT overlay/config strings
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
My proposal for this is to implement extensions in FIT. This would have a new extensions nodes, so you can specify what extensions are available for each FIT configuration.
configurations { conf-1 { compatible = ... extensions = "ext1", "ext-2"; };extensions { ext-1 { fdto = "fdt-1"; // fdt overlay for this 'cape' compatible = "vendor,combined-device1"; extensions = "ext3"; }; ext-2 { fdto = "fdto-2"; // fdt overlay for this 'cape' compatible = "vendor,device2"; }; ext-3 { fdto = "fdto-3"; compatible = "vendor,device3"; };So FIT configurations now have a list of supported extensions. The extensions are hierarchical so that you can have ext1 which can optionally have ext-2 as well. This allows boards which share a lot of 'capes' to be specified only ones.
Extensions actually present are declared by a sysinfo driver for the board, with new methods:
get_compat()- determine the compatible strings for the current platformget_ext()- get a list of compatible strings for extensions which are actually presentThe extension compatible strings are used to select the correct things from the FIT, apply the overlays and produce the final DT.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
This could be a new property in bootstd:
bootstd: {
probe-before = <&phandle of remoteproc>, ...
};Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
* uEnv.txt processing
What command can do this?
Quoted 19 lines
Quoted 3 lines
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
This could be a new bootmeth which looks for uenv.txt on available devices. It might be better to put the env in a FIT or something with a checksum.
Quoted 10 lines
Quoted 7 lines
Quoted 4 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
I'm just checking whether there is any feedback on the above? I sent the FIT part as a separate proposal.
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 121 lines · Simon Glass
Hi,
Quoted 118 lines · Simon Glass
Hi Andrew,
Quoted 87 lines · Andrew Davis
Quoted 85 lines · Simon Glass
Hi Andrew,
Quoted 81 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
Quoted 12 lines · Nishanth Menon
On 08:48-20231004, Andrew Davis wrote:
On 10/4/23 8:23 AM, Roger Quadros wrote:
ti_mmc is not a valid boot_target for standard boot flow soIs there some way to make it into a valid boot_target? Otherwise
how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it has them. I'm all for switching to this, but only if it is complete.
Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan-lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
Quoted 7 lines
Quoted 2 lines
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
We could have something like:
bootstd { image-types = "fit", "uimage"; }to limit the supported types.
Quoted 4 lines
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
How about:
bootstd { scan-order = "bootmeth,bootdev"; // instead of default "bootdev,bootmeth"; };
This along with the image-types above seem reasonable. Might also help with our EFI search order issue (we need to search all boot media for EFI parts first before trying all the other types of boot on each media, basically breadth-first search vs depth for EFI). We should be able to describe that pattern here if we think this through.
Quoted 48 lines
Quoted 48 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
* fetching and applying FIT overlay/config strings
Quoted 8 lines
Quoted 2 lines
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
My proposal for this is to implement extensions in FIT. This would have a new extensions nodes, so you can specify what extensions are available for each FIT configuration.
configurations { conf-1 { compatible = ... extensions = "ext1", "ext-2"; };extensions { ext-1 { fdto = "fdt-1"; // fdt overlay for this 'cape' compatible = "vendor,combined-device1"; extensions = "ext3"; }; ext-2 { fdto = "fdto-2"; // fdt overlay for this 'cape' compatible = "vendor,device2"; }; ext-3 { fdto = "fdto-3"; compatible = "vendor,device3"; };So FIT configurations now have a list of supported extensions. The extensions are hierarchical so that you can have ext1 which can optionally have ext-2 as well. This allows boards which share a lot of 'capes' to be specified only ones.
Extensions actually present are declared by a sysinfo driver for the board, with new methods:
Quoted 7 lines
Quoted 7 lines
get_compat()- determine the compatible strings for the current platformget_ext()- get a list of compatible strings for extensions which are actually presentThe extension compatible strings are used to select the correct things from the FIT, apply the overlays and produce the final DT.
If we have a list of compatible strings and extensions, then do we need the extensions nodes? Couldn't each extension string simply be the name of the overlay ftdo-x node to apply?
Quoted 36 lines
Quoted 36 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
This could be a new property in bootstd:
bootstd: {
probe-before = <&phandle of remoteproc>, ...
};Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
* uEnv.txt processing
What command can do this?
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
This could be a new bootmeth which looks for uenv.txt on available devices. It might be better to put the env in a FIT or something with a checksum.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
I'm just checking whether there is any feedback on the above? I sent the FIT part as a separate proposal.
Manorit,
Does the above all work for you?
Andrew
Quoted 2 lines
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Hi Andrew, Simon,
Quoted 123 lines · Andrew Davis
Quoted 121 lines · Simon Glass
Hi,
Quoted 118 lines · Simon Glass
Hi Andrew,
Quoted 87 lines · Andrew Davis
Quoted 85 lines · Simon Glass
Hi Andrew,
Quoted 81 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 15 lines · Tom Rini
Quoted 14 lines · Andrew Davis
On 10/4/23 8:54 AM, Nishanth Menon wrote:
On 08:48-20231004, Andrew Davis wrote:
On 10/4/23 8:23 AM, Roger Quadros wrote:
ti_mmc is not a valid boot_target for standard boot flow soIs there some way to make it into a valid boot_target? Otherwise
how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
Quoted 8 lines
Quoted 2 lines
If stdboot is missing these features then we shouldn't switch until it
has them. I'm all for switching to this, but only if it is complete.Depends on what you mean? Did you mean an option to run scripts (exists) or an option to do what TI needs done, via
boot/bootmeth_something.c? If the latter, someone from TI needs to figure out what that should be and do (but plumbing-wise everything it needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan-lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
Quoted 7 lines
Quoted 2 lines
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
We could have something like:
bootstd { image-types = "fit", "uimage"; }to limit the supported types.
Quoted 4 lines
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
How about:
bootstd { scan-order = "bootmeth,bootdev"; // instead of default "bootdev,bootmeth"; };
Quoted 6 lines
This along with the image-types above seem reasonable. Might also help with our EFI search order issue (we need to search all boot media for EFI parts first before trying all the other types of boot on each media, basically breadth-first search vs depth for EFI). We should be able to describe that pattern here if we think this through.
This seems okay and will solve the problem of the FIT Image issues and fallback that we were having with stdboot.
Quoted 48 lines
Quoted 48 lines
Quoted 48 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
* fetching and applying FIT overlay/config strings
Quoted 8 lines
Quoted 2 lines
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
My proposal for this is to implement extensions in FIT. This would have a new extensions nodes, so you can specify what extensions are available for each FIT configuration.
configurations { conf-1 { compatible = ... extensions = "ext1", "ext-2"; };extensions { ext-1 { fdto = "fdt-1"; // fdt overlay for this 'cape' compatible = "vendor,combined-device1"; extensions = "ext3"; }; ext-2 { fdto = "fdto-2"; // fdt overlay for this 'cape' compatible = "vendor,device2"; }; ext-3 { fdto = "fdto-3"; compatible = "vendor,device3"; };So FIT configurations now have a list of supported extensions. The extensions are hierarchical so that you can have ext1 which can optionally have ext-2 as well. This allows boards which share a lot of 'capes' to be specified only ones.
Extensions actually present are declared by a sysinfo driver for the board, with new methods:
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
get_compat()- determine the compatible strings for the current platformget_ext()- get a list of compatible strings for extensions which are actually presentThe extension compatible strings are used to select the correct things from the FIT, apply the overlays and produce the final DT.
This is something that is still concerning me, so previously we used to have two methods of applying overlays, one was through FIT Image where we have the overlays embedded and in another we used to use non FIT boot where the overlays were present in the filesystem only and we used to apply them, this might solve the problem with FIT Image booting overlays but normal kernel boot and dtb with overlays is still something that I don't know would be possible or not with this. Is there any way to do that?
Quoted 18 lines
If we have a list of compatible strings and extensions, then do we need the extensions nodes? Couldn't each extension string simply be the name of the overlay ftdo-x node to apply?
Quoted 13 lines
Quoted 13 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
This could be a new property in bootstd:
bootstd: {
probe-before = <&phandle of remoteproc>, ...
};
I think this can also work, the firmware names we can get from the dt nodes and I think modifying the names to signed firmwares that we used to do in the scripts can be handled in the driver itself.
Andrew, do you see anything else in this that cannot work?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 3 lines
* uEnv.txt processing
What command can do this?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
This could be a new bootmeth which looks for uenv.txt on available devices. It might be better to put the env in a FIT or something with a checksum.
We use non-FIT boot as well for our non HS platforms, I think the new bootmeth might be helpful as you mentioned, would have to look at this more as I thought bootmeth is supposed to boot a platform at the end only but it seems like here we'll be combining this bootmeth ( that'll just import the env ) and then other bootmeth will actually boot Linux.
Regards,
Manorit
Quoted 25 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Quoted 5 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
I'm just checking whether there is any feedback on the above? I sent the FIT part as a separate proposal.
Manorit,
Does the above all work for you?
Andrew
Quoted 2 lines
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 215 lines · Manorit Chawdhry
Hi Andrew, Simon,
Quoted 123 lines · Andrew Davis
Quoted 121 lines · Simon Glass
Hi,
Quoted 118 lines · Simon Glass
Hi Andrew,
Quoted 87 lines · Andrew Davis
Quoted 85 lines · Simon Glass
Hi Andrew,
Quoted 81 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 32 lines · Nishanth Menon
Quoted 23 lines · Tom Rini
On Thu, Oct 05, 2023 at 09:19:48AM -0500, Andrew Davis wrote:
On 10/4/23 8:54 AM, Nishanth Menon wrote:
On 08:48-20231004, Andrew Davis wrote:
On 10/4/23 8:23 AM, Roger Quadros wrote:
ti_mmc is not a valid boot_target for standard boot flow soIs there some way to make it into a valid boot_target? Otherwise
how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
If stdboot is missing these features then we shouldn't switch until it
has them. I'm all for switching to this, but only if it is complete.Depends on what you mean? Did you mean an option to run scripts
(exists) or an option to do what TI needs done, via
boot/bootmeth_something.c ? If the latter, someone from TI needs to
figure out what that should be and do (but plumbing-wise everything it
needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The challenge is early
remote_procloading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
Quoted 8 lines
The other gap has been support for uEnv.txt -> which we can workaround at the moment by using
CONFIG_BOOTCOMMAND="runenvboot; bootflow scan -lb" in defconfig (This series from Roger already does that - hence I am saying that Andrew is complaining on the wrong series).Ideally, we should just have
CONFIG_BOOTCOMMAND="bootflowscan-lb" and uEnv.txt remoteproc loads and the various standard bootmethods should "just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
Quoted 7 lines
Quoted 2 lines
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
We could have something like:
bootstd { image-types = "fit", "uimage"; }to limit the supported types.
Quoted 4 lines
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
How about:
bootstd { scan-order = "bootmeth,bootdev"; // instead of default "bootdev,bootmeth"; };Quoted 6 lines
This along with the image-types above seem reasonable. Might also help with our EFI search order issue (we need to search all boot media for EFI parts first before trying all the other types of boot on each media, basically breadth-first search vs depth for EFI). We should be able to describe that pattern here if we think this through.
This seems okay and will solve the problem of the FIT Image issues and fallback that we were having with stdboot.
Quoted 48 lines
Quoted 48 lines
Quoted 48 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
* fetching and applying FIT overlay/config strings
Quoted 8 lines
Quoted 2 lines
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
My proposal for this is to implement extensions in FIT. This would have a new extensions nodes, so you can specify what extensions are available for each FIT configuration.
configurations { conf-1 { compatible = ... extensions = "ext1", "ext-2"; };extensions { ext-1 { fdto = "fdt-1"; // fdt overlay for this 'cape' compatible = "vendor,combined-device1"; extensions = "ext3"; }; ext-2 { fdto = "fdto-2"; // fdt overlay for this 'cape' compatible = "vendor,device2"; }; ext-3 { fdto = "fdto-3"; compatible = "vendor,device3"; };So FIT configurations now have a list of supported extensions. The extensions are hierarchical so that you can have ext1 which can optionally have ext-2 as well. This allows boards which share a lot of 'capes' to be specified only ones.
Extensions actually present are declared by a sysinfo driver for the board, with new methods:
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
get_compat()- determine the compatible strings for the current platformget_ext()- get a list of compatible strings for extensions which are actually presentThe extension compatible strings are used to select the correct things from the FIT, apply the overlays and produce the final DT.
This is something that is still concerning me, so previously we used to have two methods of applying overlays, one was through FIT Image where we have the overlays embedded and in another we used to use non FIT boot where the overlays were present in the filesystem only and we used to apply them, this might solve the problem with FIT Image booting overlays but normal kernel boot and dtb with overlays is still something that I don't know would be possible or not with this. Is there any way to do that?
Quoted 15 lines
If we have a list of compatible strings and extensions, then do we need the extensions nodes? Couldn't each extension string simply be the name of the overlay ftdo-x node to apply?
Quoted 10 lines
Quoted 10 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
This could be a new property in bootstd:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
bootstd: {
probe-before = <&phandle of remoteproc>, ...
};I think this can also work, the firmware names we can get from the dt nodes and I think modifying the names to signed firmwares that we used to do in the scripts can be handled in the driver itself.
We need to also think about where the firmware blobs themselves come from in this case. In fact we are having that discussion in a different thread right now[0].
My suggestion would be to have the firmware inside the FIT. This is already supported to some degree for normal firmware (TFA/OP-TEE/etc.). This way drivers do not need to deal with all the complexity of finding and loading blobs (they would have to replicate all the logic of stdboot to find the blobs correctly in all cases if the blobs are not in the same FIT that stdboot finds for us).
Quoted 17 lines
Andrew, do you see anything else in this that cannot work?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 3 lines
* uEnv.txt processing
What command can do this?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
This could be a new bootmeth which looks for uenv.txt on available devices. It might be better to put the env in a FIT or something with a checksum.
Quoted 6 lines
We use non-FIT boot as well for our non HS platforms, I think the new bootmeth might be helpful as you mentioned, would have to look at this more as I thought bootmeth is supposed to boot a platform at the end only but it seems like here we'll be combining this bootmeth ( that'll just import the env ) and then other bootmeth will actually boot Linux.
As long as bootmeths can perform an action then continue with other bootmeths that could work. This might require complex logic though. For instance the uenv.txt bootmeth would only need run on some subset of available bootdevs, and it should scan all those devs for uenv.txt first, before the Linux finding bootmeths start.
Andrew
[0] https://lore.kernel.org/all/[email protected]/
Quoted 28 lines
Regards,
ManoritQuoted 25 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Quoted 5 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
I'm just checking whether there is any feedback on the above? I sent the FIT part as a separate proposal.
Manorit,
Does the above all work for you?
Andrew
Quoted 2 lines
Regards,
Simon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 20 lines · Andrew Davis
Quoted 13 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
Quoted 1 line
* uEnv.txt processing
What command can do this?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
This could be a new bootmeth which looks for uenv.txt on available devices. It might be better to put the env in a FIT or something with a checksum.
Quoted 6 lines
We use non-FIT boot as well for our non HS platforms, I think the new bootmeth might be helpful as you mentioned, would have to look at this more as I thought bootmeth is supposed to boot a platform at the end only but it seems like here we'll be combining this bootmeth ( that'll just import the env ) and then other bootmeth will actually boot Linux.
Quoted 6 lines
As long as bootmeths can perform an action then continue with other bootmeths that could work. This might require complex logic though. For instance the uenv.txt bootmeth would only need run on some subset of available bootdevs, and it should scan all those devs for uenv.txt first, before the Linux finding bootmeths start.
It doesn't make sense to treat envboot as a bootmeth because it's really not about a way of booting but more often just used to modify environment variables before going through another boot flow (although you could define/run env variables that performs it's own boot). It may be better to think of it as a preprocessing step before a bootflow scan.
Some other thoughts - envboot is more of a hacky way to solve things:
1) As we move more towards secure boot as the standard, we should understand what use cases the hacks are working around and properly support those use cases.
2) But I don't think we should just remove it altogether because it is a very powerful 'feature' during the development phases to try out changes without modifying/rebuilding/reflashing u-boot.
3) This is a TI feature. Are others solving this need in a better way?
Jon
Re: [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets
In reply to Andrew DavisHi Andrew,
Quoted 229 lines · Andrew Davis
Quoted 215 lines · Manorit Chawdhry
Hi Andrew, Simon,
Quoted 123 lines · Andrew Davis
Quoted 121 lines · Simon Glass
Hi,
Quoted 118 lines · Simon Glass
Hi Andrew,
Quoted 87 lines · Andrew Davis
Quoted 85 lines · Simon Glass
Hi Andrew,
Quoted 81 lines · Andrew Davis
Quoted 57 lines · Tom Rini
Quoted 56 lines · Manorit Chawdhry
Hi Simon,
Quoted 53 lines · Simon Glass
Hi Nishanth,
Quoted 49 lines · Nishanth Menon
Quoted 40 lines · Nishanth Menon
On 12:36-20231005, Tom Rini wrote:
On Thu, Oct 05, 2023 at 09:19:48AM -0500, Andrew Davis wrote:
On 10/4/23 8:54 AM, Nishanth Menon wrote:
On 08:48-20231004, Andrew Davis wrote:
On 10/4/23 8:23 AM, Roger Quadros wrote:
ti_mmc is not a valid boot_target for standard boot flow soIs there some way to make it into a valid boot_target? Otherwise
how do we use uEnv.txt files, or boot from FIT images with overlays?envboot takes care of uEnv.txt file (see
https://lore.kernel.org/all/[email protected]/)Early remote proc loading and FIT image is a question for stdboot itself.
If stdboot is missing these features then we shouldn't switch until it
has them. I'm all for switching to this, but only if it is complete.Depends on what you mean? Did you mean an option to run scripts
(exists) or an option to do what TI needs done, via
boot/bootmeth_something.c ? If the latter, someone from TI needs to
figure out what that should be and do (but plumbing-wise everything it
needs should exist).Andrew is generalizing here (on the wrong patch though).
On am62x platforms, there is nothing regressing with this series. The
challenge is early remote_proc loading which is done for J7* platforms.How that is initiated as part of bootmethods is something of a gap.
The other gap has been support for uEnv.txt -> which we can workaround
at the moment by using CONFIG_BOOTCOMMAND="run envboot; bootflow scan
-lb" in defconfig (This series from Roger already does that - hence I am
saying that Andrew is complaining on the wrong series).Ideally, we should just have CONFIG_BOOTCOMMAND="bootflow scan-lb" and
uEnv.txt remoteproc loads and the various standard bootmethods should
"just work".I forgot to add: FIT image authenticated boot flow. That is really what
ti_mmcdistroboot method was trying to solve.Maybe Simon or someone know how the stdboot flow handles authenticated kernel image and dtb boot flow with FIT image?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Yes you can use FIT configuration verification and things should work as normal.
Could you give any reference documentation for this?
I suspect you should start with
doc/usage/fit/beaglebone_vboot.rstFrom that doc:
``` Boot the board using the commands below:: setenv bootargs console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ext2load mmc 0:2 82000000 /boot/image.fit bootm 82000000 ```This is very much not stdboot :( This doc has some good and current info on building a secure FIT image, but much of it is showing its age. Stdboot is still missing
* ability to limit boot mode search to only one image (FIT)
Quoted 7 lines
Quoted 2 lines
What does this mean? Can you please be more specific or give an example?
Sure, for instance with secure boot we only want to search for FIT images and if for each media this fails we do not want to fall back to other image types or boot modes (like UART boot or net boot which would bypass the signature checks).
We could have something like:
bootstd { image-types = "fit", "uimage"; }to limit the supported types.
Quoted 4 lines
Something similar is needed for searching for EFI compatible boot across each enabled boot media first, before trying other methods on each media. Basically breadth-first search on each media type not depth-first.
How about:
bootstd { scan-order = "bootmeth,bootdev"; // instead of default "bootdev,bootmeth"; };Quoted 6 lines
This along with the image-types above seem reasonable. Might also help with our EFI search order issue (we need to search all boot media for EFI parts first before trying all the other types of boot on each media, basically breadth-first search vs depth for EFI). We should be able to describe that pattern here if we think this through.
This seems okay and will solve the problem of the FIT Image issues and fallback that we were having with stdboot.
Quoted 48 lines
Quoted 48 lines
Quoted 48 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
* fetching and applying FIT overlay/config strings
Quoted 8 lines
Quoted 2 lines
Re overlays, is this the 'extension' command? What are config strings?
When we have DT overlays in our FIT image, we build a string to pass to bootm to apply all the selected overlays[0]. If there is now another mechanism for this please let me know (building this string today is messy).
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L18
My proposal for this is to implement extensions in FIT. This would have a new extensions nodes, so you can specify what extensions are available for each FIT configuration.
configurations { conf-1 { compatible = ... extensions = "ext1", "ext-2"; };extensions { ext-1 { fdto = "fdt-1"; // fdt overlay for this 'cape' compatible = "vendor,combined-device1"; extensions = "ext3"; }; ext-2 { fdto = "fdto-2"; // fdt overlay for this 'cape' compatible = "vendor,device2"; }; ext-3 { fdto = "fdto-3"; compatible = "vendor,device3"; };So FIT configurations now have a list of supported extensions. The extensions are hierarchical so that you can have ext1 which can optionally have ext-2 as well. This allows boards which share a lot of 'capes' to be specified only ones.
Extensions actually present are declared by a sysinfo driver for the board, with new methods:
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
get_compat()- determine the compatible strings for the current platformget_ext()- get a list of compatible strings for extensions which are actually presentThe extension compatible strings are used to select the correct things from the FIT, apply the overlays and produce the final DT.
This is something that is still concerning me, so previously we used to have two methods of applying overlays, one was through FIT Image where we have the overlays embedded and in another we used to use non FIT boot where the overlays were present in the filesystem only and we used to apply them, this might solve the problem with FIT Image booting overlays but normal kernel boot and dtb with overlays is still something that I don't know would be possible or not with this. Is there any way to do that?
Quoted 15 lines
If we have a list of compatible strings and extensions, then do we need the extensions nodes? Couldn't each extension string simply be the name of the overlay ftdo-x node to apply?
Quoted 10 lines
Quoted 10 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
* remote proc loading
What command can do this?
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/ti_common.env?ref_type=heads#L28
This could be a new property in bootstd:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
bootstd: {
probe-before = <&phandle of remoteproc>, ...
};I think this can also work, the firmware names we can get from the dt nodes and I think modifying the names to signed firmwares that we used to do in the scripts can be handled in the driver itself.
We need to also think about where the firmware blobs themselves come from in this case. In fact we are having that discussion in a different thread right now[0].
Quoted 7 lines
My suggestion would be to have the firmware inside the FIT. This is already supported to some degree for normal firmware (TFA/OP-TEE/etc.). This way drivers do not need to deal with all the complexity of finding and loading blobs (they would have to replicate all the logic of stdboot to find the blobs correctly in all cases if the blobs are not in the same FIT that stdboot finds for us).
How would we handle people who use non-FIT boot? If you are telling us to pack these in tispl.bin/u-boot.img then am not sure if size could be an issue otherwise it does seem scalable but I would be against packing these in the Kernel FIT image as that would make no sense at all to me with the complexity that FIT building already has and having additional things to pack with multiple projects involved while generating the FIT. Also, I don't want people to depend on FIT image and the old method of using Kernel + DTB should still work and this approach won't help in solving that.
Regards,
Manorit
Quoted 62 lines
Quoted 17 lines
Andrew, do you see anything else in this that cannot work?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 3 lines
* uEnv.txt processing
What command can do this?
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
run envboot;
https://source.denx.de/u-boot/u-boot/-/blob/master/include/env/ti/mmc.env?ref_type=heads#L20
This could be a new bootmeth which looks for uenv.txt on available devices. It might be better to put the env in a FIT or something with a checksum.
Quoted 6 lines
We use non-FIT boot as well for our non HS platforms, I think the new bootmeth might be helpful as you mentioned, would have to look at this more as I thought bootmeth is supposed to boot a platform at the end only but it seems like here we'll be combining this bootmeth ( that'll just import the env ) and then other bootmeth will actually boot Linux.
As long as bootmeths can perform an action then continue with other bootmeths that could work. This might require complex logic though. For instance the uenv.txt bootmeth would only need run on some subset of available bootdevs, and it should scan all those devs for uenv.txt first, before the Linux finding bootmeths start.
Andrew
[0] https://lore.kernel.org/all/[email protected]/
Quoted 28 lines
Regards,
ManoritQuoted 25 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Quoted 5 lines
Last two can be solved by adding to
CONFIG_BOOTCOMMANDbefore callingbootflow scanas suggested above. Until we figure out the first two I don't see us ready to switch.I'm happy to help figure this out.
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Thanks, we are eager to standardize our boot flows and stdboot seems like the right way forward, very happy to have your guidance on these last few items :)
I'm just checking whether there is any feedback on the above? I sent the FIT part as a separate proposal.
Manorit,
Does the above all work for you?
Andrew
Quoted 2 lines
Regards,
Simon