4.14.329-rc1 review
Subsystems (4)
Greg Kroah-Hartman
maintainercover 4.14.329-rc1 review
This is the start of the stable review cycle for the 4.14.329 release. There are 48 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.329-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.329-rc1
Cameron Williams <[email protected]>
tty: 8250: Add support for Intashield IS-100
Cameron Williams <[email protected]>
tty: 8250: Add support for Brainboxes UP cards
Cameron Williams <[email protected]>
tty: 8250: Add support for additional Brainboxes UC cards
Cameron Williams <[email protected]>
tty: 8250: Remove UC-257 and UC-431
LihaSika <[email protected]>
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
Vicki Pfau <[email protected]>
PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
George Kennedy <[email protected]>
vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
Christoph Hellwig <[email protected]>
remove the sx8 block driver
Arnd Bergmann <[email protected]>
ata: ahci: fix enum constants for gcc-13
Su Hui <[email protected]>
net: chelsio: cxgb4: add an error code check in t4_load_phy_fw
Hans de Goede <[email protected]>
platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
Tomas Henzl <[email protected]>
scsi: mpt3sas: Fix in error path
Jorge Maidana <[email protected]>
fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
Shuming Fan <[email protected]>
ASoC: rt5650: fix the wrong result of key button
Florian Westphal <[email protected]>
netfilter: nfnetlink_log: silence bogus compiler warning
Arnd Bergmann <[email protected]>
fbdev: atyfb: only use ioremap_uc() on i386 and ia64
Dmitry Torokhov <[email protected]>
Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
Zhang Shurong <[email protected]>
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
Ben Wolsieffer <[email protected]>
irqchip/stm32-exti: add missing DT IRQ flag translation
Kuninori Morimoto <[email protected]>
ASoC: simple-card: fixup asoc_simple_probe() error handling
Juergen Gross <[email protected]>
x86: Fix .brk attribute in linker script
Hangyu Hua <[email protected]>
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
Bjorn Andersson <[email protected]>
rpmsg: glink: Release driver_override
Krzysztof Kozlowski <[email protected]>
rpmsg: Fix calling device_lock() on non-initialized device
Krzysztof Kozlowski <[email protected]>
rpmsg: Fix kfree() of static memory on setting driver_override
Krzysztof Kozlowski <[email protected]>
driver: platform: Add helper for safer setting of driver_override
Josh Poimboeuf <[email protected]>
x86/mm: Fix RESERVE_BRK() for older binutils
Josh Poimboeuf <[email protected]>
x86/mm: Simplify RESERVE_BRK()
Thomas Gleixner <[email protected]>
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
Al Viro <[email protected]>
nfsd: lock_rename() needs both directories to live on the same fs
Chao Yu <[email protected]>
f2fs: fix to do sanity check on inode type during garbage collection
Wang Hai <[email protected]>
kobject: Fix slab-out-of-bounds in fill_kobj_path()
Lukasz Majczak <[email protected]>
drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
Nick Desaulniers <[email protected]>
ARM: 8933/1: replace Sun/Solaris style flag on section directive
Trond Myklebust <[email protected]>
NFS: Don't call generic_error_remove_page() while holding locks
Peter Zijlstra <[email protected]>
perf/core: Fix potential NULL deref
Herve Codina <[email protected]>
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
Herve Codina <[email protected]>
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
Herve Codina <[email protected]>
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
Ivan Vecera <[email protected]>
i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
Pablo Neira Ayuso <[email protected]>
gtp: uapi: fix GTPA_MAX
Fred Chen <[email protected]>
tcp: fix wrong RTO timeout when received SACK reneging
Douglas Anderson <[email protected]>
r8152: Increase USB control msg timeout to 5000ms as per spec
Mateusz Palczewski <[email protected]>
igb: Fix potential memory leak in igb_add_ethtool_nfc_entry
Kunwu Chan <[email protected]>
treewide: Spelling fix in comment
Gavin Shan <[email protected]>
virtio_balloon: Fix endless deflation and inflation on arm64
Rodríguez Barbarin, José Javier <[email protected]>
mcb-lpc: Reallocate memory region to avoid memory overlapping
Rodríguez Barbarin, José Javier <[email protected]>
mcb: Return actual parsed size when reading chameleon table
-------------
Diffstat:
Makefile | 4 +- arch/arm/boot/bootp/init.S | 2 +- arch/arm/boot/compressed/big-endian.S | 2 +- arch/arm/boot/compressed/head.S | 2 +- arch/arm/boot/compressed/piggy.S | 2 +- arch/arm/mm/proc-arm1020.S | 2 +- arch/arm/mm/proc-arm1020e.S | 2 +- arch/arm/mm/proc-arm1022.S | 2 +- arch/arm/mm/proc-arm1026.S | 2 +- arch/arm/mm/proc-arm720.S | 2 +- arch/arm/mm/proc-arm740.S | 2 +- arch/arm/mm/proc-arm7tdmi.S | 2 +- arch/arm/mm/proc-arm920.S | 2 +- arch/arm/mm/proc-arm922.S | 2 +- arch/arm/mm/proc-arm925.S | 2 +- arch/arm/mm/proc-arm926.S | 2 +- arch/arm/mm/proc-arm940.S | 2 +- arch/arm/mm/proc-arm946.S | 2 +- arch/arm/mm/proc-arm9tdmi.S | 2 +- arch/arm/mm/proc-fa526.S | 2 +- arch/arm/mm/proc-feroceon.S | 2 +- arch/arm/mm/proc-mohawk.S | 2 +- arch/arm/mm/proc-sa110.S | 2 +- arch/arm/mm/proc-sa1100.S | 2 +- arch/arm/mm/proc-v6.S | 2 +- arch/arm/mm/proc-v7.S | 2 +- arch/arm/mm/proc-v7m.S | 4 +- arch/arm/mm/proc-xsc3.S | 2 +- arch/arm/mm/proc-xscale.S | 2 +- arch/x86/include/asm/i8259.h | 2 + arch/x86/include/asm/setup.h | 46 +- arch/x86/kernel/acpi/boot.c | 3 + arch/x86/kernel/i8259.c | 38 +- arch/x86/kernel/vmlinux.lds.S | 2 +- drivers/ata/ahci.h | 226 +-- drivers/base/driver.c | 69 + drivers/base/platform.c | 28 +- drivers/block/Kconfig | 9 - drivers/block/Makefile | 2 - drivers/block/sx8.c | 1746 --------------------- drivers/dma/ste_dma40.c | 1 + drivers/gpu/drm/drm_dp_mst_topology.c | 6 +- drivers/i2c/muxes/i2c-demux-pinctrl.c | 2 +- drivers/i2c/muxes/i2c-mux-gpmux.c | 2 +- drivers/i2c/muxes/i2c-mux-pinctrl.c | 2 +- drivers/input/mouse/synaptics.c | 1 + drivers/input/rmi4/rmi_smbus.c | 50 +- drivers/irqchip/irq-stm32-exti.c | 1 + drivers/mcb/mcb-lpc.c | 35 +- drivers/mcb/mcb-parse.c | 15 +- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 + drivers/net/ethernet/intel/i40e/i40e_txrx.c | 2 +- drivers/net/ethernet/intel/igb/igb_ethtool.c | 6 +- drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +- drivers/net/usb/r8152.c | 7 +- drivers/pci/quirks.c | 9 +- drivers/platform/x86/asus-wmi.h | 2 +- drivers/rpmsg/qcom_glink_native.c | 1 + drivers/rpmsg/rpmsg_core.c | 34 +- drivers/rpmsg/rpmsg_internal.h | 5 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +- drivers/tty/serial/8250/8250_pci.c | 122 +- drivers/tty/vt/vc_screen.c | 9 +- drivers/usb/storage/unusual_cypress.h | 2 +- drivers/video/fbdev/aty/atyfb_base.c | 4 + drivers/video/fbdev/uvesafb.c | 2 +- drivers/virtio/virtio_balloon.c | 6 +- fs/f2fs/gc.c | 3 +- fs/nfs/write.c | 3 +- fs/nfsd/vfs.c | 12 +- include/linux/device.h | 2 + include/linux/pci_ids.h | 1 + include/linux/platform_device.h | 6 +- include/linux/rpmsg.h | 14 +- include/uapi/linux/gtp.h | 2 +- kernel/events/core.c | 3 +- lib/kobject.c | 12 +- net/ipv4/tcp_input.c | 9 +- net/netfilter/nfnetlink_log.c | 2 +- sound/soc/codecs/rt5645.c | 2 + sound/soc/generic/simple-card.c | 6 +- 81 files changed, 598 insertions(+), 2046 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/48 mcb: Return actual parsed size when reading chameleon table
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rodríguez Barbarin, José Javier <[email protected]>
[ Upstream commit a889c276d33d333ae96697510f33533f6e9d9591 ]
The function chameleon_parse_cells() returns the number of cells parsed which has an undetermined size. This return value is only used for error checking but the number of cells is never used.
Change return value to be number of bytes parsed to allow for memory management improvements.
--- drivers/mcb/mcb-parse.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/mcb/mcb-parse.c +10 -5
@@ -127,7 +127,7 @@ static void chameleon_parse_bar(void __iomem *base, } } -static int chameleon_get_bar (char __iomem **base,phys_addr_t mapbase, +static int chameleon_get_bar (void __iomem **base,phys_addr_t mapbase,struct chameleon_bar **cb) {struct chameleon_bar *c;
@@ -176,12 +176,13 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase, {struct chameleon_fpga_header *header;struct chameleon_bar *cb; -char __iomem *p = base; +void __iomem *p = base;int num_cells =0 ;uint32_t dtype;int bar_count;int ret;u32 hsize; +u32 table_size; hsize =sizeof (struct chameleon_fpga_header );
@@ -236,12 +237,16 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase, num_cells++; } -if (num_cells ==0 ) - num_cells = -EINVAL ; +if (num_cells ==0 ) { + ret = -EINVAL ; + goto free_bar; + } + table_size = p - base; +pr_debug ("%d cell(s) found. Chameleon table size: 0x%04x bytes\n" , num_cells, table_size);kfree (cb);kfree (header); -return num_cells; +return table_size; free_bar:kfree (cb);
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 2/48 mcb-lpc: Reallocate memory region to avoid memory overlapping
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rodríguez Barbarin, José Javier <[email protected]>
[ Upstream commit 2025b2ca8004c04861903d076c67a73a0ec6dfca ]
mcb-lpc requests a fixed-size memory region to parse the chameleon table, however, if the chameleon table is smaller that the allocated region, it could overlap with the IP Cores' memory regions.
After parsing the chameleon table, drop/reallocate the memory region with the actual chameleon table size.
--- drivers/mcb/mcb-lpc.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-)
drivers/mcb/mcb-lpc.c +31 -4
@@ -26,7 +26,7 @@ static int mcb_lpc_probe(struct platform_device *pdev) {struct resource *res;struct priv *priv; -int ret =0 ; +int ret =0 , table_size; priv =devm_kzalloc (&pdev->dev,sizeof (*priv),GFP_KERNEL );if (!priv)
@@ -61,16 +61,43 @@ static int mcb_lpc_probe(struct platform_device *pdev) ret =chameleon_parse_cells (priv->bus, priv->mem->start, priv->base);if (ret <0 ) { -mcb_release_bus (priv->bus); -return ret; + goto out_mcb_bus; } -dev_dbg (&pdev->dev,"Found %d cells\n" , ret); + table_size = ret; + +if (table_size <CHAM_HEADER_SIZE ) { +/* Release the previous resources */ +devm_iounmap (&pdev->dev, priv->base); +devm_release_mem_region (&pdev->dev, priv->mem->start,resource_size (priv->mem)); + +/* Then, allocate it again with the actual chameleon table size */ + res =devm_request_mem_region (&pdev->dev, priv->mem->start, + table_size, +KBUILD_MODNAME ); +if (!res) { +dev_err (&pdev->dev,"Failed to request PCI memory\n" ); + ret = -EBUSY ; + goto out_mcb_bus; + } + + priv->base =devm_ioremap (&pdev->dev, priv->mem->start, table_size); +if (!priv->base) { +dev_err (&pdev->dev,"Cannot ioremap\n" ); + ret = -ENOMEM ; + goto out_mcb_bus; + } + +platform_set_drvdata (pdev, priv); + }mcb_bus_add_devices (priv->bus);return 0 ; +out_mcb_bus: +mcb_release_bus (priv->bus); +return ret; }static int mcb_lpc_remove (struct platform_device *pdev)
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 3/48 virtio_balloon: Fix endless deflation and inflation on arm64
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gavin Shan <[email protected]>
commit 07622bd415639e9709579f400afd19e7e9866e5e upstream.
The deflation request to the target, which isn't unaligned to the guest page size causes endless deflation and inflation actions. For example, we receive the flooding QMP events for the changes on memory balloon's size after a deflation request to the unaligned target is sent for the ARM64 guest, where we have 64KB base page size.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host -cpu host \
-smp maxcpus=8,cpus=8,sockets=2,clusters=2,cores=2,threads=1 \
-m 1024M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=512M \
-object memory-backend-ram,id=mem1,size=512M \
-numa node,nodeid=0,memdev=mem0,cpus=0-3 \
-numa node,nodeid=1,memdev=mem1,cpus=4-7 \
: \
-device virtio-balloon-pci,id=balloon0,bus=pcie.10
{ "execute" : "balloon", "arguments": { "value" : 1073672192 } }
{"return": {}}
{"timestamp": {"seconds": 1693272173, "microseconds": 88667}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272174, "microseconds": 89704}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272175, "microseconds": 90819}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272176, "microseconds": 91961}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272177, "microseconds": 93040}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
{"timestamp": {"seconds": 1693272178, "microseconds": 94117}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
{"timestamp": {"seconds": 1693272179, "microseconds": 95337}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272180, "microseconds": 96615}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
{"timestamp": {"seconds": 1693272181, "microseconds": 97626}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272182, "microseconds": 98693}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
{"timestamp": {"seconds": 1693272183, "microseconds": 99698}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272184, "microseconds": 100727}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272185, "microseconds": 90430}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{"timestamp": {"seconds": 1693272186, "microseconds": 102999}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073676288}}
:
<The similar QMP events repeat>Fix it by aligning the target up to the guest page size, 64KB in this specific case. With this applied, no flooding QMP events are observed and the memory balloon's size can be stablizied to 0x3ffe0000 soon after the deflation request is sent.
{ "execute" : "balloon", "arguments": { "value" : 1073672192 } }
{"return": {}}
{"timestamp": {"seconds": 1693273328, "microseconds": 793075}, \
"event": "BALLOON_CHANGE", "data": {"actual": 1073610752}}
{ "execute" : "query-balloon" }
{"return": {"actual": 1073610752}}Message-Id: <[email protected]>
--- drivers/virtio/virtio_balloon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/virtio/virtio_balloon.c +5 -1
@@ -341,7 +341,11 @@ static inline s64 towards_target(structif (!virtio_has_feature (vb->vdev,VIRTIO_F_VERSION_1 )) num_pages =le32_to_cpu ((__force __le32 )num_pages); - target = num_pages; +/* +* Aligned up to guest page size to avoid inflating and deflating +* balloon endlessly. +*/ + target =ALIGN (num_pages,VIRTIO_BALLOON_PAGES_PER_PAGE );return target - vb->num_pages; }
Greg Kroah-Hartman
maintainerPATCH 4/48 treewide: Spelling fix in comment
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kunwu Chan <[email protected]>
[ Upstream commit fb71ba0ed8be9534493c80ba00142a64d9972a72 ]
reques -> request
--- drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/toshiba/ps3_gelic_wireless.c +1 -1
@@ -1232,7 +1232,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev, key_index = wl->current_key;if (!enc->length && (ext->ext_flags &IW_ENCODE_EXT_SET_TX_KEY )) { -/* reques to change default key index */ +/* request to change default key index */ pr_debug ("%s: request to change default key to %d\n" , __func__, key_index); wl->current_key = key_index;
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 5/48 igb: Fix potential memory leak in igb_add_ethtool_nfc_entry
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mateusz Palczewski <[email protected]>
[ Upstream commit 8c0b48e01daba5ca58f939a8425855d3f4f2ed14 ]
Add check for return of igb_update_ethtool_nfc_entry so that in case of any potential errors the memory alocated for input will be freed.
--- drivers/net/ethernet/intel/igb/igb_ethtool.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/igb/igb_ethtool.c +5 -1
@@ -2951,11 +2951,15 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,if (err) goto err_out_w_lock; -igb_update_ethtool_nfc_entry (adapter, input, input->sw_idx); + err =igb_update_ethtool_nfc_entry (adapter, input, input->sw_idx); +if (err) + goto err_out_input_filter;spin_unlock (&adapter->nfc_lock);return 0 ; +err_out_input_filter: +igb_erase_filter (adapter, input); err_out_w_lock:spin_unlock (&adapter->nfc_lock); err_out:
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 6/48 r8152: Increase USB control msg timeout to 5000ms as per spec
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Douglas Anderson <[email protected]>
[ Upstream commit a5feba71ec9c14a54c3babdc732c5b6866d8ee43 ]
According to the comment next to USB_CTRL_GET_TIMEOUT and USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is usually quite fast, the spec allows them to take up to 5 seconds. Let's increase the timeout in the Realtek driver from 500ms to 5000ms (using the #defines) to account for this.
This is not just a theoretical change. The need for the longer timeout was seen in testing. Specifically, if you drop a sc7180-trogdor based Chromebook into the kdb debugger and then "go" again after sitting in the debugger for a while, the next USB control message takes a long time. Out of ~40 tests the slowest USB control message was 4.5 seconds.
While dropping into kdb is not exactly an end-user scenario, the above is similar to what could happen due to an temporary interrupt storm, what could happen if there was a host controller (HW or SW) issue, or what could happen if the Realtek device got into a confused state and needed time to recover.
This change is fairly critical since the r8152 driver in Linux doesn't expect register reads/writes (which are backed by USB control messages) to fail.
--- drivers/net/usb/r8152.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/net/usb/r8152.c +4 -3
@@ -786,7 +786,7 @@ int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) ret =usb_control_msg (tp->udev,usb_rcvctrlpipe (tp->udev,0 ),RTL8152_REQ_GET_REGS ,RTL8152_REQT_READ , - value, index, tmp, size,500 ); + value, index, tmp, size,USB_CTRL_GET_TIMEOUT );if (ret <0 )memset (data,0xff , size);else
@@ -809,7 +809,7 @@ int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) ret =usb_control_msg (tp->udev,usb_sndctrlpipe (tp->udev,0 ),RTL8152_REQ_SET_REGS ,RTL8152_REQT_WRITE , - value, index, tmp, size,500 ); + value, index, tmp, size,USB_CTRL_SET_TIMEOUT );kfree (tmp);
@@ -5084,7 +5084,8 @@ static u8 rtl_get_version(struct usb_interface *intf) ret =usb_control_msg (udev,usb_rcvctrlpipe (udev,0 ),RTL8152_REQ_GET_REGS ,RTL8152_REQT_READ , -PLA_TCR0 ,MCU_TYPE_PLA , tmp,sizeof (*tmp),500 ); +PLA_TCR0 ,MCU_TYPE_PLA , tmp,sizeof (*tmp), +USB_CTRL_GET_TIMEOUT );if (ret >0 ) ocp_data = (__le32_to_cpu (*tmp) >>16 ) &VERSION_MASK ;
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 7/48 tcp: fix wrong RTO timeout when received SACK reneging
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fred Chen <[email protected]>
[ Upstream commit d2a0fc372aca561556e765d0a9ec365c7c12f0ad ]
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging() will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer() is moved after tcp_fastretrans_alert()(which do the SACK reneging check), so the RTO timeout will be overwrited by tcp_set_xmit_timer() with icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid being overwrited later.
--- net/ipv4/tcp_input.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
net/ipv4/tcp_input.c +5 -4
@@ -2069,16 +2069,17 @@ void tcp_enter_loss(struct sock *sk)* restore sanity to the SACK scoreboard. If the apparent reneging * persists until this RTO then we'll clear the SACK scoreboard. */ -static bool tcp_check_sack_reneging (struct sock *sk,int flag) +static bool tcp_check_sack_reneging (struct sock *sk,int *ack_flag) { -if (flag &FLAG_SACK_RENEGING && - flag &FLAG_SND_UNA_ADVANCED ) { +if (*ack_flag &FLAG_SACK_RENEGING && + *ack_flag &FLAG_SND_UNA_ADVANCED ) {struct tcp_sock *tp =tcp_sk (sk);unsigned long delay =max (usecs_to_jiffies (tp->srtt_us >>4 ),msecs_to_jiffies (10 ));inet_csk_reset_xmit_timer (sk,ICSK_TIME_RETRANS , delay,TCP_RTO_MAX ); + *ack_flag &= ~FLAG_SET_XMIT_TIMER ;return true; }return false;
@@ -2870,7 +2871,7 @@ static void tcp_fastretrans_alert(struct sock *sk, const int acked, tp->prior_ssthresh =0 ;/* B. In all the states check for reneging SACKs. */ -if (tcp_check_sack_reneging (sk, flag)) +if (tcp_check_sack_reneging (sk, ack_flag))return ;/* C. Check consistency of the current state. */
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 8/48 gtp: uapi: fix GTPA_MAX
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit adc8df12d91a2b8350b0cd4c7fec3e8546c9d1f8 ]
Subtract one to __GTPA_MAX, otherwise GTPA_MAX is off by 2.
--- include/uapi/linux/gtp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/uapi/linux/gtp.h +1 -1
@@ -30,6 +30,6 @@ enum gtp_attrs {GTPA_PAD , __GTPA_MAX, }; -#define GTPA_MAX (__GTPA_MAX + 1) +#define GTPA_MAX (__GTPA_MAX - 1)#endif /* _UAPI_LINUX_GTP_H_ */
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 9/48 i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Vecera <[email protected]>
[ Upstream commit 77a8c982ff0d4c3a14022c6fe9e3dbfb327552ec ]
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.
--- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/i40e/i40e_txrx.c +1 -1
@@ -2401,7 +2401,7 @@ int i40e_napi_poll(struct napi_struct *napi, int budget)return budget; } -if (vsi->back->flags &I40E_TXR_FLAGS_WB_ON_ITR ) +if (q_vector->tx.ring[0 ].flags &I40E_TXR_FLAGS_WB_ON_ITR ) q_vector->arm_wb_state = false;/* Work is done so exit the polling mode and re-enable the interrupt */
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 10/48 i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herve Codina <[email protected]>
commit 3171d37b58a76e1febbf3f4af2d06234a98cf88b upstream.
i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount.
--- drivers/i2c/muxes/i2c-mux-pinctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/muxes/i2c-mux-pinctrl.c +1 -1
@@ -73,7 +73,7 @@ static struct i2c_adapter *i2c_mux_pinctdev_err (dev,"Cannot parse i2c-parent\n" );return ERR_PTR (-ENODEV ); } - parent =of_find_i2c_adapter_by_node (parent_np); + parent =of_get_i2c_adapter_by_node (parent_np);of_node_put (parent_np);if (!parent)return ERR_PTR (-EPROBE_DEFER );
Greg Kroah-Hartman
maintainerPATCH 11/48 i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herve Codina <[email protected]>
commit 3dc0ec46f6e7511fc4fdf6b6cda439382bc957f1 upstream.
i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount.
--- drivers/i2c/muxes/i2c-mux-gpmux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/muxes/i2c-mux-gpmux.c +1 -1
@@ -55,7 +55,7 @@ static struct i2c_adapter *mux_parent_addev_err (dev,"Cannot parse i2c-parent\n" );return ERR_PTR (-ENODEV ); } - parent =of_find_i2c_adapter_by_node (parent_np); + parent =of_get_i2c_adapter_by_node (parent_np);of_node_put (parent_np);if (!parent)return ERR_PTR (-EPROBE_DEFER );
Greg Kroah-Hartman
maintainerPATCH 12/48 i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herve Codina <[email protected]>
commit 0fb118de5003028ad092a4e66fc6d07b86c3bc94 upstream.
i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
--- drivers/i2c/muxes/i2c-demux-pinctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/muxes/i2c-demux-pinctrl.c +1 -1
@@ -63,7 +63,7 @@ static int i2c_demux_activate_master(strif (ret) goto err; - adap =of_find_i2c_adapter_by_node (priv->chan[new_chan].parent_np); + adap =of_get_i2c_adapter_by_node (priv->chan[new_chan].parent_np);if (!adap) { ret = -ENODEV ; goto err_with_revert;
Greg Kroah-Hartman
maintainerPATCH 13/48 perf/core: Fix potential NULL deref
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit a71ef31485bb51b846e8db8b3a35e432cc15afb5 upstream.
Smatch is awesome.
--- kernel/events/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/events/core.c +2 -1
@@ -11059,7 +11059,8 @@ static int inherit_group(struct perf_eveif (IS_ERR (child_ctr))return PTR_ERR (child_ctr); } - leader->group_generation = parent_event->group_generation; +if (leader) + leader->group_generation = parent_event->group_generation;return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 14/48 NFS: Dont call generic_error_remove_page() while holding locks
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
[ Upstream commit 22876f540bdf19af9e4fca893ce02ba7ee65ebcc ]
The NFS read code can trigger writeback while holding the page lock. If an error then triggers a call to nfs_write_error_remove_page(), we can deadlock.
--- fs/nfs/write.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
fs/nfs/write.c +1 -2
@@ -587,9 +587,8 @@ nfs_lock_and_join_requests(struct page *page)static void nfs_write_error_remove_page (struct nfs_page *req) { +SetPageError (req->wb_page);nfs_end_page_writeback (req); -generic_error_remove_page (page_file_mapping (req->wb_page), - req->wb_page);nfs_release_request (req); }
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 15/48 ARM: 8933/1: replace Sun/Solaris style flag on section directive
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nick Desaulniers <[email protected]>
[ Upstream commit 790756c7e0229dedc83bf058ac69633045b1000e ]
It looks like a section directive was using "Solaris style" to declare the section flags. Replace this with the GNU style so that Clang's integrated assembler can assemble this directive.
The modified instances were identified via:
$ ag \.section | grep #
--- arch/arm/boot/bootp/init.S | 2 +- arch/arm/boot/compressed/big-endian.S | 2 +- arch/arm/boot/compressed/head.S | 2 +- arch/arm/boot/compressed/piggy.S | 2 +- arch/arm/mm/proc-arm1020.S | 2 +- arch/arm/mm/proc-arm1020e.S | 2 +- arch/arm/mm/proc-arm1022.S | 2 +- arch/arm/mm/proc-arm1026.S | 2 +- arch/arm/mm/proc-arm720.S | 2 +- arch/arm/mm/proc-arm740.S | 2 +- arch/arm/mm/proc-arm7tdmi.S | 2 +- arch/arm/mm/proc-arm920.S | 2 +- arch/arm/mm/proc-arm922.S | 2 +- arch/arm/mm/proc-arm925.S | 2 +- arch/arm/mm/proc-arm926.S | 2 +- arch/arm/mm/proc-arm940.S | 2 +- arch/arm/mm/proc-arm946.S | 2 +- arch/arm/mm/proc-arm9tdmi.S | 2 +- arch/arm/mm/proc-fa526.S | 2 +- arch/arm/mm/proc-feroceon.S | 2 +- arch/arm/mm/proc-mohawk.S | 2 +- arch/arm/mm/proc-sa110.S | 2 +- arch/arm/mm/proc-sa1100.S | 2 +- arch/arm/mm/proc-v6.S | 2 +- arch/arm/mm/proc-v7.S | 2 +- arch/arm/mm/proc-v7m.S | 4 ++-- arch/arm/mm/proc-xsc3.S | 2 +- arch/arm/mm/proc-xscale.S | 2 +- 28 files changed, 29 insertions(+), 29 deletions(-)
arch/arm/boot/bootp/init.S +1 -1
@@ -16,7 +16,7 @@ * size immediately following the kernel, we could build this into * a binary blob, and concatenate the zImage using the cat command. */ - .section .start,#alloc,#execinstr + .section .start, "ax" .type _start, #function .globl _start
arch/arm/boot/compressed/big-endian.S +1 -1
@@ -6,7 +6,7 @@ * Author: Nicolas Pitre */ - .section ".start", #alloc, #execinstr + .section ".start", "ax" mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #(1 << 7) @ enable big endian mode
arch/arm/boot/compressed/head.S +1 -1
@@ -114,7 +114,7 @@ #endif .endm - .section ".start", #alloc, #execinstr + .section ".start", "ax" /* * sort out different calling conventions */
arch/arm/boot/compressed/piggy.S +1 -1
@@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ - .section .piggydata,#alloc + .section .piggydata, "a" .globl input_data input_data: .incbin "arch/arm/boot/compressed/piggy_data"
arch/arm/mm/proc-arm1020.S +1 -1
@@ -505,7 +505,7 @@ cpu_arm1020_name: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020_proc_info,#object __arm1020_proc_info:
arch/arm/mm/proc-arm1020e.S +1 -1
@@ -463,7 +463,7 @@ arm1020e_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1020e_proc_info,#object __arm1020e_proc_info:
arch/arm/mm/proc-arm1022.S +1 -1
@@ -448,7 +448,7 @@ arm1022_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1022_proc_info,#object __arm1022_proc_info:
arch/arm/mm/proc-arm1026.S +1 -1
@@ -442,7 +442,7 @@ arm1026_crval: string cpu_arm1026_name, "ARM1026EJ-S" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm1026_proc_info,#object __arm1026_proc_info:
arch/arm/mm/proc-arm720.S +1 -1
@@ -186,7 +186,7 @@ arm720_crval: * See <asm/procinfo.h> for a definition of this structure. */ - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req .type __\name\()_proc_info,#object
arch/arm/mm/proc-arm740.S +1 -1
@@ -132,7 +132,7 @@ __arm740_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm740_proc_info,#object __arm740_proc_info: .long 0x41807400
arch/arm/mm/proc-arm7tdmi.S +1 -1
@@ -76,7 +76,7 @@ __arm7tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \ extra_hwcaps=0
arch/arm/mm/proc-arm920.S +1 -1
@@ -448,7 +448,7 @@ arm920_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm920_proc_info,#object __arm920_proc_info:
arch/arm/mm/proc-arm922.S +1 -1
@@ -426,7 +426,7 @@ arm922_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm922_proc_info,#object __arm922_proc_info:
arch/arm/mm/proc-arm925.S +1 -1
@@ -491,7 +491,7 @@ arm925_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object
arch/arm/mm/proc-arm926.S +1 -1
@@ -474,7 +474,7 @@ arm926_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm926_proc_info,#object __arm926_proc_info:
arch/arm/mm/proc-arm940.S +1 -1
@@ -344,7 +344,7 @@ __arm940_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm940_proc_info,#object __arm940_proc_info:
arch/arm/mm/proc-arm946.S +1 -1
@@ -399,7 +399,7 @@ __arm946_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __arm946_proc_info,#object __arm946_proc_info: .long 0x41009460
arch/arm/mm/proc-arm9tdmi.S +1 -1
@@ -70,7 +70,7 @@ __arm9tdmi_setup: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info, #object
arch/arm/mm/proc-fa526.S +1 -1
@@ -190,7 +190,7 @@ fa526_cr1_set: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __fa526_proc_info,#object __fa526_proc_info:
arch/arm/mm/proc-feroceon.S +1 -1
@@ -584,7 +584,7 @@ feroceon_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req .type __\name\()_proc_info,#object
arch/arm/mm/proc-mohawk.S +1 -1
@@ -429,7 +429,7 @@ mohawk_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __88sv331x_proc_info,#object __88sv331x_proc_info:
arch/arm/mm/proc-sa110.S +1 -1
@@ -199,7 +199,7 @@ sa110_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .type __sa110_proc_info,#object __sa110_proc_info:
arch/arm/mm/proc-sa1100.S +1 -1
@@ -242,7 +242,7 @@ sa1100_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req .type __\name\()_proc_info,#object
arch/arm/mm/proc-v6.S +1 -1
@@ -264,7 +264,7 @@ v6_crval: string cpu_elf_name, "v6" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Match any ARMv6 processor core.
arch/arm/mm/proc-v7.S +1 -1
@@ -636,7 +636,7 @@ __v7_setup_stack: string cpu_elf_name, "v7" .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" /* * Standard v7 proc info content
arch/arm/mm/proc-v7m.S +2 -2
@@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin) ret lr ENDPROC(cpu_cm7_proc_fin) - .section ".init.text", #alloc, #execinstr + .section ".init.text", "ax" __v7m_cm7_setup: mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)
@@ -181,7 +181,7 @@ ENDPROC(__v7m_setup) string cpu_elf_name "v7m" string cpu_v7m_name "ARMv7-M" - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0, proc_fns = v7m_processor_functions .long 0 /* proc_info_list.__cpu_mm_mmu_flags */
arch/arm/mm/proc-xsc3.S +1 -1
@@ -499,7 +499,7 @@ xsc3_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req .type __\name\()_proc_info,#object
arch/arm/mm/proc-xscale.S +1 -1
@@ -613,7 +613,7 @@ xscale_crval: .align - .section ".proc.info.init", #alloc + .section ".proc.info.init", "a" .macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache .type __\name\()_proc_info,#object
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 16/48 drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukasz Majczak <[email protected]>
commit 3d887d512494d678b17c57b835c32f4e48d34f26 upstream.
As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to
the memcpy() and cause following:
[12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30
As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop.
--- drivers/gpu/drm/drm_dp_mst_topology.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_dp_mst_topology.c +3 -3
@@ -1268,14 +1268,14 @@ static struct drm_dp_mst_branch *get_mststruct drm_dp_mst_branch *found_mstb;struct drm_dp_mst_port *port; +if (!mstb) +return NULL ; +if (memcmp (mstb->guid, guid,16 ) ==0 )return mstb;list_for_each_entry (port, &mstb->ports, next) { -if (!port->mstb) -continue ; - found_mstb =get_mst_branch_device_by_guid_helper (port->mstb, guid);if (found_mstb)
Greg Kroah-Hartman
maintainerPATCH 17/48 kobject: Fix slab-out-of-bounds in fill_kobj_path()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Hai <[email protected]>
commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 upstream.
In kobject_get_path(), if kobj->name is changed between calls get_kobj_path_length() and fill_kobj_path() and the length becomes longer, then fill_kobj_path() will have an out-of-bounds bug.
The actual current problem occurs when the ixgbe probe.
In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name length becomes longer, out-of-bounds will occur.
cpu0 cpu1ixgbe_probe
register_netdev(netdev)
netdev_register_kobject
device_add
kobject_uevent // Sending ADD events
systemd-udevd // rename netdev
dev_change_name
device_rename
kobject_rename
ixgbe_mii_bus_init |
mdiobus_register |
__mdiobus_register |
device_register |
device_add |
kobject_uevent |
kobject_get_path |
len = get_kobj_path_length // old name |
path = kzalloc(len, gfp_mask); | kobj->name = name; /* name length becomes
* longer */
fill_kobj_path /* kobj path length is
* longer than path,
* resulting in out of
* bounds when filling path
*/
This is the kasan report:
==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0 Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673 Workqueue: events work_for_cpu_fn Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x86/0x1e7 print_report+0x36/0x4f kasan_report+0xad/0x130 kasan_check_range+0x35/0x1c0 memcpy+0x39/0x60 fill_kobj_path+0x50/0xc0 kobject_get_path+0x5a/0xc0 kobject_uevent_env+0x140/0x460 device_add+0x5c7/0x910 __mdiobus_register+0x14e/0x490 ixgbe_probe.cold+0x441/0x574 [ixgbe] local_pci_probe+0x78/0xc0 work_for_cpu_fn+0x26/0x40 process_one_work+0x3b6/0x6a0 worker_thread+0x368/0x520 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30
This reproducer triggers that bug:
while:
do
rmmod ixgbe
sleep 0.5
modprobe ixgbe
sleep 0.5When calling fill_kobj_path() to fill path, if the name length of kobj becomes longer, return failure and retry. This fixes the problem.
--- lib/kobject.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
lib/kobject.c +10 -2
@@ -118,7 +118,7 @@ static int get_kobj_path_length(struct kreturn length; } -static void fill_kobj_path (struct kobject *kobj,char *path,int length) +static int fill_kobj_path (struct kobject *kobj,char *path,int length) {struct kobject *parent;
@@ -127,12 +127,16 @@ static void fill_kobj_path(struct kobjecint cur =strlen (kobject_name (parent));/* back up enough to print this name with '/' */ length -= cur; +if (length <=0 ) +return -EINVAL ;memcpy (path + length,kobject_name (parent), cur); *(path + --length) ='/' ; }pr_debug ("kobject: '%s' (%p): %s: path = '%s'\n" ,kobject_name (kobj), kobj, __func__, path); + +return 0 ; }/**
@@ -148,13 +152,17 @@ char *kobject_get_path(struct kobject *kchar *path;int len; +retry: len =get_kobj_path_length (kobj);if (len ==0 )return NULL ; path =kzalloc (len, gfp_mask);if (!path)return NULL ; -fill_kobj_path (kobj, path, len); +if (fill_kobj_path (kobj, path, len)) { +kfree (path); + goto retry; + }return path; }
Greg Kroah-Hartman
maintainerPATCH 18/48 f2fs: fix to do sanity check on inode type during garbage collection
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chao Yu <[email protected]>
commit 9056d6489f5a41cfbb67f719d2c0ce61ead72d9f upstream.
As report by Wenqing Liu in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215231
- Overview
kernel NULL pointer dereference triggered in folio_mark_dirty() when mount and operate on a crafted f2fs image
- Reproduce
tested on kernel 5.16-rc3, 5.15.X under root
1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
4. cp tmp mnt
F2FS-fs (loop0): sanity_check_inode: inode (ino=49) extent info [5942, 4294180864, 4] is incorrect, run fsck to fix F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=31340049, run fsck to fix.
BUG: kernel NULL pointer dereference, address: 0000000000000000 folio_mark_dirty+0x33/0x50 move_data_page+0x2dd/0x460 [f2fs] do_garbage_collect+0xc18/0x16a0 [f2fs] f2fs_gc+0x1d3/0xd90 [f2fs] f2fs_balance_fs+0x13a/0x570 [f2fs] f2fs_create+0x285/0x840 [f2fs] path_openat+0xe6d/0x1040 do_filp_open+0xc5/0x140 do_sys_openat2+0x23a/0x310 do_sys_open+0x57/0x80
The root cause is for special file: e.g. character, block, fifo or socket file, f2fs doesn't assign address space operations pointer array for mapping->a_ops field, so, in a fuzzed image, SSA table indicates a data block belong to special file, when f2fs tries to migrate that block, it causes NULL pointer access once move_data_page() calls a_ops->set_dirty_page().
--- fs/f2fs/gc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/f2fs/gc.c +2 -1
@@ -841,7 +841,8 @@ next_step:if (phase ==3 ) { inode =f2fs_iget (sb, dni.ino); -if (IS_ERR (inode) ||is_bad_inode (inode)) +if (IS_ERR (inode) ||is_bad_inode (inode) || +special_file (inode->i_mode))continue ;/* if encrypted inode, let's go phase 3 */
Greg Kroah-Hartman
maintainerPATCH 19/48 nfsd: lock_rename() needs both directories to live on the same fs
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 1aee9158bc978f91701c5992e395efbc6da2de3c upstream.
... checking that after lock_rename() is too late. Incidentally, NFSv2 had no nfserr_xdev...
--- fs/nfsd/vfs.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
fs/nfsd/vfs.c +6 -6
@@ -1665,6 +1665,12 @@ nfsd_rename(struct svc_rqst *rqstp, struif (!flen ||isdotent (fname, flen) || !tlen ||isdotent (tname, tlen)) goto out; + err = (rqstp->rq_vers ==2 ) ? nfserr_acces : nfserr_xdev; +if (ffhp->fh_export->ex_path.mnt != tfhp->fh_export->ex_path.mnt) + goto out; +if (ffhp->fh_export->ex_path.dentry != tfhp->fh_export->ex_path.dentry) + goto out; + host_err =fh_want_write (ffhp);if (host_err) { err =nfserrno (host_err);
@@ -1698,12 +1704,6 @@ nfsd_rename(struct svc_rqst *rqstp, struif (ndentry == trap) goto out_dput_new; - host_err = -EXDEV ; -if (ffhp->fh_export->ex_path.mnt != tfhp->fh_export->ex_path.mnt) - goto out_dput_new; -if (ffhp->fh_export->ex_path.dentry != tfhp->fh_export->ex_path.dentry) - goto out_dput_new; - host_err =vfs_rename (fdir, odentry, tdir, ndentry,NULL ,0 );if (!host_err) { host_err =commit_metadata (tfhp);
Greg Kroah-Hartman
maintainerPATCH 20/48 x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
commit 128b0c9781c9f2651bea163cb85e52a6c7be0f9e upstream.
David and a few others reported that on certain newer systems some legacy interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in uninitialized state which makes the PIC detection fail and the kernel switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on checks for the number of legacy PIC interrupts or the availability of the real PIC.
In theory there is no reason to use the PIC on any modern system when IO/APIC is available, but the dependencies on the related checks cannot be resolved trivially and on short notice. This needs lots of analysis and rework.
The PIC detection has been added to avoid quirky checks and force selection of the dummy implementation all over the place, especially in VM guest scenarios. So it's not an option to revert the relevant commit as that would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and retry the detection, but that puts the burden on everything which does not have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises in bit 0 that the system is PCAT compatible, which means it has a legacy 8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real PIC installed, which then gets initialized (for nothing) and makes the rest of the code with all the dependencies work again.
--- arch/x86/include/asm/i8259.h | 2 ++ arch/x86/kernel/acpi/boot.c | 3 +++ arch/x86/kernel/i8259.c | 38 ++++++++++++++++++++++++++++++-------- 3 files changed, 35 insertions(+), 8 deletions(-)
arch/x86/include/asm/i8259.h +2 -0
@@ -67,6 +67,8 @@ struct legacy_pic {void (*make_irq)(unsigned int irq); }; +void legacy_pic_pcat_compat (void ); +extern struct legacy_pic *legacy_pic;extern struct legacy_pic null_legacy_pic;
arch/x86/kernel/acpi/boot.c +3 -0
@@ -156,6 +156,9 @@ static int __init acpi_parse_madt(struct madt->address); } +if (madt->flags &ACPI_MADT_PCAT_COMPAT ) +legacy_pic_pcat_compat (); +default_acpi_madt_oem_check (madt->header.oem_id, madt->header.oem_table_id);
arch/x86/kernel/i8259.c +30 -8
@@ -32,6 +32,7 @@*/ static void init_8259A (int auto_eoi); +static bool pcat_compat__ro_after_init ;static int i8259A_auto_eoi;DEFINE_RAW_SPINLOCK (i8259A_lock);
@@ -300,15 +301,32 @@ static void unmask_8259A(void)static int probe_8259A (void ) { +unsigned char new_val, probe_val = ~(1 <<PIC_CASCADE_IR );unsigned long flags; -unsigned char probe_val = ~(1 <<PIC_CASCADE_IR ); -unsigned char new_val; + +/* +* If MADT has the PCAT_COMPAT flag set, then do not bother probing +* for the PIC. Some BIOSes leave the PIC uninitialized and probing +* fails. +* +* Right now this causes problems as quite some code depends on +* nr_legacy_irqs() > 0 or has_legacy_pic() == true. This is silly +* when the system has an IO/APIC because then PIC is not required +* at all, except for really old machines where the timer interrupt +* must be routed through the PIC. So just pretend that the PIC is +* there and let legacy_pic->init() initialize it for nothing. +* +* Alternatively this could just try to initialize the PIC and +* repeat the probe, but for cases where there is no PIC that's +* just pointless. +*/ +if (pcat_compat) +return nr_legacy_irqs (); +/* -* Check to see if we have a PIC. -* Mask all except the cascade and read -* back the value we just wrote. If we don't -* have a PIC, we will read 0xff as opposed to the -* value we wrote. +* Check to see if we have a PIC. Mask all except the cascade and +* read back the value we just wrote. If we don't have a PIC, we +* will read 0xff as opposed to the value we wrote. */ raw_spin_lock_irqsave (&i8259A_lock, flags);
@@ -430,5 +448,9 @@ static int __init i8259A_init_ops(void)return 0 ; } -device_initcall (i8259A_init_ops); + +void __init legacy_pic_pcat_compat (void ) +{ + pcat_compat = true; +}
Greg Kroah-Hartman
maintainerPATCH 21/48 x86/mm: Simplify RESERVE_BRK()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
commit a1e2c031ec3949b8c039b739c0b5bf9c30007b00 upstream.
RESERVE_BRK() reserves data in the .brk_reservation section. The data is initialized to zero, like BSS, so the macro specifies 'nobits' to prevent the data from taking up space in the vmlinux binary. The only way to get the compiler to do that (without putting the variable in .bss proper) is to use inline asm.
The macro also has a hack which encloses the inline asm in a discarded function, which allows the size to be passed (global inline asm doesn't allow inputs).
Remove the need for the discarded function hack by just stringifying the size rather than supplying it as an input to the inline asm.
--- arch/x86/include/asm/setup.h | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-)
arch/x86/include/asm/setup.h +11 -19
@@ -91,27 +91,19 @@ extern unsigned long _brk_end;void *extend_brk (size_t size,size_t align);/* -* Reserve space in the brk section. The name must be unique within -* the file, and somewhat descriptive. The size is in bytes. Must be -* used at file scope. +* Reserve space in the brk section. The name must be unique within the file, +* and somewhat descriptive. The size is in bytes. * -* (This uses a temp function to wrap the asm so we can pass it the -* size parameter; otherwise we wouldn't be able to. We can't use a -* "section" attribute on a normal variable because it always ends up -* being @progbits, which ends up allocating space in the vmlinux -* executable.) +* The allocation is done using inline asm (rather than using a section +* attribute on a normal variable) in order to allow the use of @nobits, so +* that it doesn't take up any space in the vmlinux file. */ -#define RESERVE_BRK (name,sz) \ - static void __section(.discard.text) __used notrace \ - __brk_reservation_fn_##name##__(void) { \ - asm volatile ( \ - ".pushsection .brk_reservation,\"aw\",@nobits;" \ - ".brk." #name ":" \ - " 1:.skip %c0;" \ - " .size .brk." #name ", . - 1b;" \ - " .popsection" \ - : : "i" (sz)); \ - } +#define RESERVE_BRK (name, size) \ + asm(".pushsection .brk_reservation,\"aw\",@nobits\n\t" \ + ".brk." #name ":\n\t" \ + ".skip " __stringify(size) "\n\t" \ + ".size .brk." #name ", " __stringify(size) "\n\t" \ + ".popsection\n\t")/* Helper for reserving space for arrays of things */ #define RESERVE_BRK_ARRAY (type, name, entries) \
Greg Kroah-Hartman
maintainerPATCH 22/48 x86/mm: Fix RESERVE_BRK() for older binutils
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
commit e32683c6f7d22ba624e0bfc58b02cf3348bdca63 upstream.
With binutils 2.26, RESERVE_BRK() causes a build failure:
/tmp/ccnGOKZ5.s: Assembler messages:
/tmp/ccnGOKZ5.s:98: Error: missing ')' /tmp/ccnGOKZ5.s:98: Error: missing ')' /tmp/ccnGOKZ5.s:98: Error: missing ')' /tmp/ccnGOKZ5.s:98: Error: junk at end of line, first unrecognized character is `U'
The problem is this line:
RESERVE_BRK(early_pgt_alloc, INIT_PGT_BUF_SIZE)
Specifically, the INIT_PGT_BUF_SIZE macro which (via PAGE_SIZE's use _AC()) has a "1UL", which makes older versions of the assembler unhappy. Unfortunately the _AC() macro doesn't work for inline asm.
Inline asm was only needed here to convince the toolchain to add the STT_NOBITS flag. However, if a C variable is placed in a section whose name is prefixed with ".bss", GCC and Clang automatically set STT_NOBITS. In fact, ".bss..page_aligned" already relies on this trick.
So fix the build failure (and simplify the macro) by allocating the variable in C.
Also, add NOLOAD to the ".brk" output section clause in the linker script. This is a failsafe in case the ".bss" prefix magic trick ever stops working somehow. If there's a section type mismatch, the GNU linker will force the ".brk" output section to be STT_NOBITS. The LLVM linker will fail with a "section type mismatch" error.
Note this also changes the name of the variable from .brk.##name to __brk_##name. The variable names aren't actually used anywhere, so it's harmless.
[nathan: Fix conflict due to lack of 360db4ace311 and resolve silent
conflict with 360db4ace3117]
--- arch/x86/include/asm/setup.h | 38 +++++++++++++++++++++----------------- arch/x86/kernel/vmlinux.lds.S | 4 ++-- 2 files changed, 23 insertions(+), 19 deletions(-)
arch/x86/include/asm/setup.h +21 -17
@@ -91,19 +91,16 @@ extern unsigned long _brk_end;void *extend_brk (size_t size,size_t align);/* -* Reserve space in the brk section. The name must be unique within the file, -* and somewhat descriptive. The size is in bytes. +* Reserve space in the .brk section, which is a block of memory from which the +* caller is allowed to allocate very early (before even memblock is available) +* by calling extend_brk(). All allocated memory will be eventually converted +* to memblock. Any leftover unallocated memory will be freed. * -* The allocation is done using inline asm (rather than using a section -* attribute on a normal variable) in order to allow the use of @nobits, so -* that it doesn't take up any space in the vmlinux file. +* The size is in bytes. */ -#define RESERVE_BRK (name, size) \ - asm(".pushsection .brk_reservation,\"aw\",@nobits\n\t" \ - ".brk." #name ":\n\t" \ - ".skip " __stringify(size) "\n\t" \ - ".size .brk." #name ", " __stringify(size) "\n\t" \ - ".popsection\n\t") +#define RESERVE_BRK (name, size) \ + __section(.bss..brk) __aligned(1) __used \ + static char __brk_##name[size]/* Helper for reserving space for arrays of things */ #define RESERVE_BRK_ARRAY (type, name, entries) \
@@ -121,12 +118,19 @@ asmlinkage void __init x86_64_start_rese#endif /* __i386__ */ #endif /* _SETUP */ -#else -#define RESERVE_BRK (name,sz) \ - .pushsection .brk_reservation,"aw",@nobits; \ -.brk.name: \ -1: .skip sz; \ - .size .brk.name,.-1b; \ + +#else /* __ASSEMBLY */ + +.macro __RESERVE_BRK name, size + .pushsection .bss..brk, "aw" +GLOBAL(__brk_\name) + .skip \size +END(__brk_\name) .popsection +.endm + +#define RESERVE_BRK (name, size) __RESERVE_BRK name, size +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_X86_SETUP_H */
arch/x86/kernel/vmlinux.lds.S +2 -2
@@ -359,10 +359,10 @@ SECTIONS } . = ALIGN(PAGE_SIZE); - .brk : AT(ADDR(.brk) - LOAD_OFFSET) { + .brk (NOLOAD) : AT(ADDR(.brk) - LOAD_OFFSET) { __brk_base = .; . += 64 * 1024; /* 64k alignment slop space */ - *(.brk_reservation) /* areas brk users have reserved */ + *(.bss..brk) /* areas brk users have reserved */ __brk_limit = .; }
Greg Kroah-Hartman
maintainerPATCH 23/48 driver: platform: Add helper for safer setting of driver_override
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 6c2f421174273de8f83cde4286d1c076d43a2d35 upstream.
Several core drivers and buses expect that driver_override is a dynamically allocated memory thus later they can kfree() it.
However such assumption is not documented, there were in the past and there are already users setting it to a string literal. This leads to kfree() of static memory during device release (e.g. in error paths or during unbind):
kernel BUG at ../mm/slub.c:3960!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
...
(kfree) from [<c058da50>] (platform_device_release+0x88/0xb4)
(platform_device_release) from [<c0585be0>] (device_release+0x2c/0x90)
(device_release) from [<c0a69050>] (kobject_put+0xec/0x20c)
(kobject_put) from [<c0f2f120>] (exynos5_clk_probe+0x154/0x18c)
(exynos5_clk_probe) from [<c058de70>] (platform_drv_probe+0x6c/0xa4)
(platform_drv_probe) from [<c058b7ac>] (really_probe+0x280/0x414)
(really_probe) from [<c058baf4>] (driver_probe_device+0x78/0x1c4)
(driver_probe_device) from [<c0589854>] (bus_for_each_drv+0x74/0xb8)
(bus_for_each_drv) from [<c058b48c>] (__device_attach+0xd4/0x16c)
(__device_attach) from [<c058a638>] (bus_probe_device+0x88/0x90)
(bus_probe_device) from [<c05871fc>] (device_add+0x3dc/0x62c)
(device_add) from [<c075ff10>] (of_platform_device_create_pdata+0x94/0xbc)
(of_platform_device_create_pdata) from [<c07600ec>] (of_platform_bus_create+0x1a8/0x4fc)
(of_platform_bus_create) from [<c0760150>] (of_platform_bus_create+0x20c/0x4fc)
(of_platform_bus_create) from [<c07605f0>] (of_platform_populate+0x84/0x118)
(of_platform_populate) from [<c0f3c964>] (of_platform_default_populate_init+0xa0/0xb8)
(of_platform_default_populate_init) from [<c01031f8>] (do_one_initcall+0x8c/0x404)Provide a helper which clearly documents the usage of driver_override. This will allow later to reuse the helper and reduce the amount of duplicated code.
Convert the platform driver to use a new helper and make the driver_override field const char (it is not modified by the core).
--- drivers/base/driver.c | 69 ++++++++++++++++++++++++++++++++++++++++ drivers/base/platform.c | 28 ++-------------- include/linux/device.h | 2 + include/linux/platform_device.h | 6 ++- 4 files changed, 80 insertions(+), 25 deletions(-)
drivers/base/driver.c +69 -0
@@ -32,6 +32,75 @@ static struct device *next_device(struct }/** +* driver_set_override() - Helper to set or clear driver override. +* @dev: Device to change +* @override: Address of string to change (e.g. &device->driver_override); +* The contents will be freed and hold newly allocated override. +* @s: NUL-terminated string, new driver name to force a match, pass empty +* string to clear it ("" or "\n", where the latter is only for sysfs +* interface). +* @len: length of @s +* +* Helper to set or clear driver override in a device, intended for the cases +* when the driver_override field is allocated by driver/bus code. +* +* Returns: 0 on success or a negative error code on failure. +*/ +int driver_set_override (struct device *dev,const char **override, +const char *s,size_t len) +{ +const char *new, *old; +char *cp; + +if (!override || !s) +return -EINVAL ; + +/* +* The stored value will be used in sysfs show callback (sysfs_emit()), +* which has a length limit of PAGE_SIZE and adds a trailing newline. +* Thus we can store one character less to avoid truncation during sysfs +* show. +*/ +if (len >= (PAGE_SIZE -1 )) +return -EINVAL ; + +if (!len) { +/* Empty string passed - clear override */ +device_lock (dev); + old = *override; + *override =NULL ; +device_unlock (dev); +kfree (old); + +return 0 ; + } + + cp =strnchr (s, len,'\n' ); +if (cp) + len = cp - s; + + new =kstrndup (s, len,GFP_KERNEL ); +if (!new) +return -ENOMEM ; + +device_lock (dev); + old = *override; +if (cp != s) { + *override = new; + }else { +/* "\n" passed - clear override */ +kfree (new); + *override =NULL ; + } +device_unlock (dev); + +kfree (old); + +return 0 ; +} +EXPORT_SYMBOL_GPL (driver_set_override); + +/** * driver_for_each_device - Iterator for devices bound to a driver. * @drv: Driver we're iterating. * @start: Device to begin with
drivers/base/platform.c +4 -24
@@ -873,31 +873,11 @@ static ssize_t driver_override_store(str const char *buf, size_t count) {struct platform_device *pdev =to_platform_device (dev); -char *driver_override, *old, *cp; +int ret; -/* We need to keep extra room for a newline */ -if (count >= (PAGE_SIZE -1 )) -return -EINVAL ; - - driver_override =kstrndup (buf, count,GFP_KERNEL ); -if (!driver_override) -return -ENOMEM ; - - cp =strchr (driver_override,'\n' ); -if (cp) - *cp ='\0' ; - -device_lock (dev); - old = pdev->driver_override; -if (strlen (driver_override)) { - pdev->driver_override = driver_override; - }else { -kfree (driver_override); - pdev->driver_override =NULL ; - } -device_unlock (dev); - -kfree (old); + ret =driver_set_override (dev, &pdev->driver_override, buf, count); +if (ret) +return ret;return count; }
include/linux/device.h +2 -0
@@ -319,6 +319,8 @@ extern int __must_check driver_create_fiextern void driver_remove_file (struct device_driver *driver,const struct driver_attribute *attr); +int driver_set_override (struct device *dev,const char **override, +const char *s,size_t len); extern int __must_check driver_for_each_device(struct device_driver *drv, struct device *start, void *data,
include/linux/platform_device.h +5 -1
@@ -29,7 +29,11 @@ struct platform_device {struct resource *resource;const struct platform_device_id *id_entry; -char *driver_override;/* Driver name to force a match */ +/* +* Driver name to force a match. Do not set directly, because core +* frees it. Use driver_set_override() to set or clear it. +*/ +const char *driver_override;/* MFD cell pointer */ struct mfd_cell *mfd_cell;
Greg Kroah-Hartman
maintainerPATCH 24/48 rpmsg: Fix kfree() of static memory on setting driver_override
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 42cd402b8fd4672b692400fe5f9eecd55d2794ac upstream.
The driver_override field from platform driver should not be initialized from static memory (string literal) because the core later kfree() it, for example when driver_override is set via sysfs.
Use dedicated helper to set driver_override properly.
--- drivers/rpmsg/rpmsg_internal.h | 13 +++++++++++-- include/linux/rpmsg.h | 6 ++++-- 2 files changed, 15 insertions(+), 4 deletions(-)
drivers/rpmsg/rpmsg_internal.h +11 -2
@@ -91,10 +91,19 @@ struct device *rpmsg_find_device(struct*/ static inline int rpmsg_chrdev_register_device (struct rpmsg_device *rpdev) { +int ret; +strcpy (rpdev->id.name,"rpmsg_chrdev" ); - rpdev->driver_override ="rpmsg_chrdev" ; + ret =driver_set_override (&rpdev->dev, &rpdev->driver_override, + rpdev->id.name,strlen (rpdev->id.name)); +if (ret) +return ret; + + ret =rpmsg_register_device (rpdev); +if (ret) +kfree (rpdev->driver_override); -return rpmsg_register_device (rpdev); +return ret; }#endif
include/linux/rpmsg.h +4 -2
@@ -66,7 +66,9 @@ struct rpmsg_channel_info {* rpmsg_device - device that belong to the rpmsg bus * @dev: the device struct * @id: device id (used to match between rpmsg drivers and devices) -* @driver_override: driver name to force a match +* @driver_override: driver name to force a match; do not set directly, +* because core frees it; use driver_set_override() to +* set or clear it. * @src: local address * @dst: destination address * @ept: the rpmsg endpoint of this channel
@@ -75,7 +77,7 @@ struct rpmsg_channel_info {struct rpmsg_device {struct device dev;struct rpmsg_device_id id; -char *driver_override; +const char *driver_override;u32 src;u32 dst;struct rpmsg_endpoint *ept;
Greg Kroah-Hartman
maintainerPATCH 25/48 rpmsg: Fix calling device_lock() on non-initialized device
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit bb17d110cbf270d5247a6e261c5ad50e362d1675 upstream.
driver_set_override() helper uses device_lock() so it should not be called before rpmsg_register_device() (which calls device_register()). Effect can be seen with CONFIG_DEBUG_MUTEXES:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 57 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x430 ... Call trace: __mutex_lock+0x1ec/0x430 mutex_lock_nested+0x44/0x50 driver_set_override+0x124/0x150 qcom_glink_native_probe+0x30c/0x3b0 glink_rpm_probe+0x274/0x350 platform_probe+0x6c/0xe0 really_probe+0x17c/0x3d0 __driver_probe_device+0x114/0x190 driver_probe_device+0x3c/0xf0 ...
Refactor the rpmsg_register_device() function to use two-step device registering (initialization + add) and call driver_set_override() in proper moment.
This moves the code around, so while at it also NULL-ify the rpdev->driver_override in error path to be sure it won't be kfree() second time.
--- drivers/rpmsg/rpmsg_core.c | 33 ++++++++++++++++++++++++++++++--- drivers/rpmsg/rpmsg_internal.h | 14 +------------- include/linux/rpmsg.h | 8 ++++++++ 3 files changed, 39 insertions(+), 16 deletions(-)
drivers/rpmsg/rpmsg_core.c +30 -3
@@ -474,24 +474,51 @@ static struct bus_type rpmsg_bus = { .remove = rpmsg_dev_remove, }; -int rpmsg_register_device (struct rpmsg_device *rpdev) +/* +* A helper for registering rpmsg device with driver override and name. +* Drivers should not be using it, but instead rpmsg_register_device(). +*/ +int rpmsg_register_device_override (struct rpmsg_device *rpdev, +const char *driver_override) {struct device *dev = &rpdev->dev;int ret; +if (driver_override) +strcpy (rpdev->id.name, driver_override); +dev_set_name (&rpdev->dev,"%s.%s.%d.%d" ,dev_name (dev->parent), rpdev->id.name, rpdev->src, rpdev->dst); rpdev->dev.bus = &rpmsg_bus; - ret =device_register (&rpdev->dev); +device_initialize (dev); +if (driver_override) { + ret =driver_set_override (dev, &rpdev->driver_override, + driver_override, +strlen (driver_override)); +if (ret) { +dev_err (dev,"device_set_override failed: %d\n" , ret); +return ret; + } + } + + ret =device_add (dev);if (ret) { -dev_err (dev,"device_register failed: %d\n" , ret); +dev_err (dev,"device_add failed: %d\n" , ret); +kfree (rpdev->driver_override); + rpdev->driver_override =NULL ;put_device (&rpdev->dev); }return ret; } +EXPORT_SYMBOL (rpmsg_register_device_override); + +int rpmsg_register_device (struct rpmsg_device *rpdev) +{ +return rpmsg_register_device_override (rpdev,NULL ); +}EXPORT_SYMBOL (rpmsg_register_device);/*
drivers/rpmsg/rpmsg_internal.h +1 -13
@@ -91,19 +91,7 @@ struct device *rpmsg_find_device(struct*/ static inline int rpmsg_chrdev_register_device (struct rpmsg_device *rpdev) { -int ret; - -strcpy (rpdev->id.name,"rpmsg_chrdev" ); - ret =driver_set_override (&rpdev->dev, &rpdev->driver_override, - rpdev->id.name,strlen (rpdev->id.name)); -if (ret) -return ret; - - ret =rpmsg_register_device (rpdev); -if (ret) -kfree (rpdev->driver_override); - -return ret; +return rpmsg_register_device_override (rpdev,"rpmsg_ctrl" ); }#endif
include/linux/rpmsg.h +8 -0
@@ -140,6 +140,8 @@ struct rpmsg_driver {#if IS_ENABLED (CONFIG_RPMSG ) +int rpmsg_register_device_override (struct rpmsg_device *rpdev, +const char *driver_override);int register_rpmsg_device (struct rpmsg_device *dev);void unregister_rpmsg_device (struct rpmsg_device *dev);int __register_rpmsg_driver (struct rpmsg_driver *drv,struct module *owner);
@@ -164,6 +166,12 @@ unsigned int rpmsg_poll(struct rpmsg_end#else +static inline int rpmsg_register_device_override (struct rpmsg_device *rpdev, +const char *driver_override) +{ +return -ENXIO ; +} +static inline int register_rpmsg_device (struct rpmsg_device *dev) {return -ENXIO ;
Greg Kroah-Hartman
maintainerPATCH 26/48 rpmsg: glink: Release driver_override
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit fb80ef67e8ff6a00d3faad4cb348dafdb8eccfd8 upstream.
Upon termination of the rpmsg_device, driver_override needs to be freed to avoid leaking the potentially assigned string.
--- drivers/rpmsg/qcom_glink_native.c | 1 + 1 file changed, 1 insertion(+)
drivers/rpmsg/qcom_glink_native.c +1 -0
@@ -1354,6 +1354,7 @@ static void qcom_glink_rpdev_release(strstruct glink_channel *channel =to_glink_channel (rpdev->ept); channel->rpdev =NULL ; +kfree (rpdev->driver_override);kfree (rpdev); }
Greg Kroah-Hartman
maintainerPATCH 27/48 rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangyu Hua <[email protected]>
commit d7bd416d35121c95fe47330e09a5c04adbc5f928 upstream.
rpmsg_register_device_override need to call put_device to free vch when driver_set_override fails.
Fix this by adding a put_device() to the error path.
--- drivers/rpmsg/rpmsg_core.c | 1 + 1 file changed, 1 insertion(+)
drivers/rpmsg/rpmsg_core.c +1 -0
@@ -499,6 +499,7 @@ int rpmsg_register_device_override(struc strlen(driver_override));if (ret) {dev_err (dev,"device_set_override failed: %d\n" , ret); +put_device (dev);return ret; } }
Greg Kroah-Hartman
maintainerPATCH 28/48 x86: Fix .brk attribute in linker script
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross <[email protected]>
commit 7e09ac27f43b382f5fe9bb7c7f4c465ece1f8a23 upstream.
Commit in Fixes added the "NOLOAD" attribute to the .brk section as a "failsafe" measure.
Unfortunately, this leads to the linker no longer covering the .brk section in a program header, resulting in the kernel loader not knowing that the memory for the .brk section must be reserved.
This has led to crashes when loading the kernel as PV dom0 under Xen, but other scenarios could be hit by the same problem (e.g. in case an uncompressed kernel is used and the initrd is placed directly behind it).
So drop the "NOLOAD" attribute. This has been verified to correctly cover the .brk section by a program header of the resulting ELF file.
--- arch/x86/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/vmlinux.lds.S +1 -1
@@ -359,7 +359,7 @@ SECTIONS } . = ALIGN(PAGE_SIZE); - .brk (NOLOAD) : AT(ADDR(.brk) - LOAD_OFFSET) { + .brk : AT(ADDR(.brk) - LOAD_OFFSET) { __brk_base = .; . += 64 * 1024; /* 64k alignment slop space */ *(.bss..brk) /* areas brk users have reserved */
Greg Kroah-Hartman
maintainerPATCH 29/48 ASoC: simple-card: fixup asoc_simple_probe() error handling
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuninori Morimoto <[email protected]>
[ Upstream commit 41bae58df411f9accf01ea660730649b2fab1dab ]
asoc_simple_probe() is used for both "DT probe" (A) and "platform probe" (B). It uses "goto err" when error case, but it is not needed for "platform probe" case (B). Thus it is using "return" directly there.
static int asoc_simple_probe(...)
{ ^ if (...) {
| ...
(A) if (ret < 0)
| goto err;
v } else {
^ ...
| if (ret < 0)
(B) return -Exxx;
v }
...
^ if (ret < 0)
(C) goto err;
v ...
err:
(D) simple_util_clean_reference(card);
return ret; }
Both case are using (C) part, and it calls (D) when err case. But (D) will do nothing for (B) case.
Because of these behavior, current code itself is not wrong, but is confusable, and more, static analyzing tool will warning on
(B) part (should use goto err).
To avoid static analyzing tool warning, this patch uses "goto err" on (B) part.
--- sound/soc/generic/simple-card.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
sound/soc/generic/simple-card.c +4 -2
@@ -441,10 +441,12 @@ static int asoc_simple_card_probe(struct platform_device *pdev) }else {struct asoc_simple_card_info *cinfo; + ret = -EINVAL ; + cinfo = dev->platform_data;if (!cinfo) {dev_err (dev,"no info for asoc-simple-card\n" ); -return -EINVAL ; + goto err; } if (!cinfo->name ||
@@ -453,7 +455,7 @@ static int asoc_simple_card_probe(struct platform_device *pdev) !cinfo->platform || !cinfo->cpu_dai.name) {dev_err (dev,"insufficient asoc_simple_card_info settings\n" ); -return -EINVAL ; + goto err; } card->name = (cinfo->card) ? cinfo->card : cinfo->name;
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 30/48 irqchip/stm32-exti: add missing DT IRQ flag translation
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Wolsieffer <[email protected]>
[ Upstream commit 8554cba1d6dbd3c74e0549e28ddbaccbb1d6b30a ]
The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger flags specified in the device tree were being ignored. This was preventing the RTC alarm interrupt from working, because it must be set to trigger on the rising edge to function correctly.
--- drivers/irqchip/irq-stm32-exti.c | 1 + 1 file changed, 1 insertion(+)
drivers/irqchip/irq-stm32-exti.c +1 -0
@@ -127,6 +127,7 @@ struct irq_domain_ops irq_exti_domain_ops = { .xlate = irq_domain_xlate_onetwocell, .alloc = stm32_exti_alloc, .free = stm32_exti_free, + .xlate = irq_domain_xlate_twocell, }; static int __init stm32_exti_init(struct device_node *node,
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 31/48 dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Shurong <[email protected]>
[ Upstream commit 0618c077a8c20e8c81e367988f70f7e32bb5a717 ]
The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context.
We fix it by calling pm_runtime_disable when error returns.
--- drivers/dma/ste_dma40.c | 1 + 1 file changed, 1 insertion(+)
drivers/dma/ste_dma40.c +1 -0
@@ -3678,6 +3678,7 @@ static int __init d40_probe(struct platform_device *pdev)regulator_disable (base->lcpa_regulator);regulator_put (base->lcpa_regulator); } +pm_runtime_disable (base->dev);kfree (base->lcla_pool.alloc_map);kfree (base->lookup_log_chans);
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 32/48 Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Torokhov <[email protected]>
[ Upstream commit 5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]
Touch controllers need some time after receiving reset command for the firmware to finish re-initializing and be ready to respond to commands from the host. The driver already had handling for the post-reset delay for I2C and SPI transports, this change adds the handling to SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2 compatibility mode, so reset is actually issued by psmouse driver on the associated serio port, after which the control is passed to the RMI4 driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in 92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus mode"), but that resulted in an unwanted delay in "fast" reconnect handler for the serio port, so it was decided to revert the patch and have the delay being handled in the RMI4 driver, similar to the other transports.
--- drivers/input/mouse/synaptics.c | 1 + drivers/input/rmi4/rmi_smbus.c | 50 ++++++++++++++++++--------------- 2 files changed, 29 insertions(+), 22 deletions(-)
drivers/input/mouse/synaptics.c +1 -0
@@ -1735,6 +1735,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,psmouse_matches_pnp_id (psmouse, topbuttonpad_pnp_ids) && !SYN_CAP_EXT_BUTTONS_STICK (info->ext_cap_10);const struct rmi_device_platform_data pdata = { + .reset_delay_ms =30 , .sensor_pdata = { .sensor_type = rmi_sensor_touchpad, .axis_align.flip_y = true,
drivers/input/rmi4/rmi_smbus.c +28 -22
76 lines not on this page · raw message
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 33/48 fbdev: atyfb: only use ioremap_uc() on i386 and ia64
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
[ Upstream commit c1a8d1d0edb71dec15c9649cb56866c71c1ecd9e ]
ioremap_uc() is only meaningful on old x86-32 systems with the PAT extension, and on ia64 with its slightly unconventional ioremap() behavior, everywhere else this is the same as ioremap() anyway.
Change the only driver that still references ioremap_uc() to only do so on x86-32/ia64 in order to allow removing that interface at some point in the future for the other architectures.
On some architectures, ioremap_uc() just returns NULL, changing the driver to call ioremap() means that they now have a chance of working correctly.
--- drivers/video/fbdev/aty/atyfb_base.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/video/fbdev/aty/atyfb_base.c +4 -0
@@ -3435,11 +3435,15 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info, } info->fix.mmio_start = raddr; +#if defined(__i386__) || defined(__ia64__)/* * By using strong UC we force the MTRR to never have an * effect on the MMIO region on both non-PAT and PAT systems. */ par->ati_regbase =ioremap_uc (info->fix.mmio_start,0x1000 ); +#else + par->ati_regbase =ioremap (info->fix.mmio_start,0x1000 ); +#endif if (par->ati_regbase ==NULL )return -ENOMEM ;
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 34/48 netfilter: nfnetlink_log: silence bogus compiler warning
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <[email protected]>
[ Upstream commit 2e1d175410972285333193837a4250a74cd472e6 ]
net/netfilter/nfnetlink_log.c:800:18: warning: variable 'ctinfo' is uninitialized
The warning is bogus, the variable is only used if ct is non-NULL and always initialised in that case. Init to 0 too to silence this.
--- net/netfilter/nfnetlink_log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/nfnetlink_log.c +1 -1
@@ -637,8 +637,8 @@ nfulnl_log_packet(struct net *net,unsigned int plen;struct nfnl_log_net *log =nfnl_log_pernet (net);const struct nfnl_ct_hook *nfnl_ct =NULL ; +enum ip_conntrack_info ctinfo =0 ;struct nf_conn *ct =NULL ; -enum ip_conntrack_info ctinfo;if (li_user && li_user->type ==NF_LOG_TYPE_ULOG ) li = li_user;
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 35/48 ASoC: rt5650: fix the wrong result of key button
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuming Fan <[email protected]>
[ Upstream commit f88dfbf333b3661faff996bb03af2024d907b76a ]
The RT5650 should enable a power setting for button detection to avoid the wrong result.
--- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+)
sound/soc/codecs/rt5645.c +2 -0
@@ -3220,6 +3220,8 @@ int rt5645_set_jack_detect(struct snd_soc_codec *codec, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ);regmap_update_bits (rt5645->regmap,RT5645_GEN_CTRL1 ,RT5645_DIG_GATE_CTRL ,RT5645_DIG_GATE_CTRL ); +regmap_update_bits (rt5645->regmap,RT5645_DEPOP_M1 , +RT5645_HP_CB_MASK ,RT5645_HP_CB_PU ); }rt5645_irq (0 , rt5645);
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 36/48 fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jorge Maidana <[email protected]>
[ Upstream commit 1022e7e2f40574c74ed32c3811b03d26b0b81daf ]
Delete the v86d netlink only after all the VBE tasks have been completed.
Fixes initial state restore on module unload:
uvesafb: VBE state restore call failed (eax=0x4f04, err=-19)
--- drivers/video/fbdev/uvesafb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/uvesafb.c +1 -1
@@ -1931,10 +1931,10 @@ static void uvesafb_exit(void) } } -cn_del_callback (&uvesafb_cn_id);driver_remove_file (&uvesafb_driver.driver, &driver_attr_v86d);platform_device_unregister (uvesafb_device);platform_driver_unregister (&uvesafb_driver); +cn_del_callback (&uvesafb_cn_id); }module_exit (uvesafb_exit);
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 37/48 scsi: mpt3sas: Fix in error path
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomas Henzl <[email protected]>
[ Upstream commit e40c04ade0e2f3916b78211d747317843b11ce10 ]
The driver should be deregistered as misc driver after PCI registration failure.
--- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/mpt3sas/mpt3sas_scsih.c +3 -1
@@ -9482,8 +9482,10 @@ _mpt3sas_init(void)mpt3sas_ctl_init (hbas_to_enumerate); error =pci_register_driver (&mpt3sas_driver); -if (error) +if (error) { +mpt3sas_ctl_exit (hbas_to_enumerate);scsih_exit (); + }return error; }
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 38/48 platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit f37cc2fc277b371fc491890afb7d8a26e36bb3a1 ]
Older Asus laptops change the backlight level themselves and then send WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11 define NOTIFY_BRNUP_MAX 0x1f define NOTIFY_BRNDOWN_MIN 0x20 define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX aka 0x20 - 0x2e events were mapped to 0x20.
This mapping is causing issues on new laptop models which actually send 0x2b events for printscreen presses and 0x2c events for capslock presses, which get translated into spurious brightness-down presses.
The plan is disable the 0x11-0x2e special mapping on laptops where asus-wmi does not register a backlight-device to avoid the spurious brightness-down keypresses. New laptops always send 0x2e for brightness-down presses, change the special internal ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in preparation for fixing the spurious brightness-down presses.
This change does not have any functional impact since all of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only then checked against the keymap code and the new 0x2e value is still in the 0x20 - 0x2e range.
--- drivers/platform/x86/asus-wmi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/asus-wmi.h +1 -1
@@ -31,7 +31,7 @@#include <linux/i8042.h> #define ASUS_WMI_KEY_IGNORE (-1) -#define ASUS_WMI_BRN_DOWN 0x20 +#define ASUS_WMI_BRN_DOWN 0x2e#define ASUS_WMI_BRN_UP 0x2fstruct module ;
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 39/48 net: chelsio: cxgb4: add an error code check in t4_load_phy_fw
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Su Hui <[email protected]>
[ Upstream commit 9f771493da935299c6393ad3563b581255d01a37 ]
t4_set_params_timeout() can return -EINVAL if failed, add check for this.
--- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +2 -0
@@ -3710,6 +3710,8 @@ int t4_load_phy_fw(struct adapter *adap, FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD)); ret =t4_set_params_timeout (adap, adap->mbox, adap->pf,0 ,1 , ¶m, &val,30000 ); +if (ret) +return ret;/* If we have version number support, then check to see that the new * firmware got loaded properly.
Signature · 1 line
2.42.0
Greg Kroah-Hartman
maintainerPATCH 40/48 ata: ahci: fix enum constants for gcc-13
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit f07788079f515ca4a681c5f595bdad19cfbd7b1d upstream.
gcc-13 slightly changes the type of constant expressions that are defined in an enum, which triggers a compile time sanity check in libata:
linux/drivers/ata/libahci.c: In function 'ahci_led_store':linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long) 357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
The new behavior is that sizeof() returns the same value for the constant as it does for the enum type, which is generally more sensible and consistent.
The problem in libata is that it contains a single enum definition for lots of unrelated constants, some of which are large positive (unsigned) integers like 0xffffffff, while others like (1<<31) are interpreted as negative integers, and this forces the enum type to become 64 bit wide even though most constants would still fit into a signed 32-bit 'int'.
Fix this by changing the entire enum definition to use BIT(x) in place of (1<<x), which results in all values being seen as 'unsigned' and fitting into an unsigned 32-bit type.
--- drivers/ata/ahci.h | 230 ++++++++++++++++++++++++++--------------------------- 1 file changed, 116 insertions(+), 114 deletions(-)
drivers/ata/ahci.h +116 -114
@@ -40,6 +40,7 @@#include <linux/libata.h> #include <linux/phy/phy.h> #include <linux/regulator/consumer.h> +#include <linux/bits.h> /* Enclosure Management Control */ #define EM_CTRL_MSG_TYPE 0x000f0000
@@ -70,12 +71,12 @@ enum {AHCI_PORT_PRIV_FBS_DMA_SZ =AHCI_CMD_SLOT_SZ +AHCI_CMD_TBL_AR_SZ + (AHCI_RX_FIS_SZ *16 ), -AHCI_IRQ_ON_SG = (1 <<31 ), -AHCI_CMD_ATAPI = (1 <<5 ), -AHCI_CMD_WRITE = (1 <<6 ), -AHCI_CMD_PREFETCH = (1 <<7 ), -AHCI_CMD_RESET = (1 <<8 ), -AHCI_CMD_CLR_BUSY = (1 <<10 ), +AHCI_IRQ_ON_SG =BIT (31 ), +AHCI_CMD_ATAPI =BIT (5 ), +AHCI_CMD_WRITE =BIT (6 ), +AHCI_CMD_PREFETCH =BIT (7 ), +AHCI_CMD_RESET =BIT (8 ), +AHCI_CMD_CLR_BUSY =BIT (10 ),RX_FIS_PIO_SETUP =0x20 ,/* offset of PIO Setup FIS data */ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
@@ -93,37 +94,37 @@ enum {HOST_CAP2 =0x24 ,/* host capabilities, extended */ /* HOST_CTL bits */ -HOST_RESET = (1 <<0 ),/* reset controller; self-clear */ -HOST_IRQ_EN = (1 <<1 ),/* global IRQ enable */ -HOST_MRSM = (1 <<2 ),/* MSI Revert to Single Message */ -HOST_AHCI_EN = (1 <<31 ),/* AHCI enabled */ +HOST_RESET =BIT (0 ),/* reset controller; self-clear */ +HOST_IRQ_EN =BIT (1 ),/* global IRQ enable */ +HOST_MRSM =BIT (2 ),/* MSI Revert to Single Message */ +HOST_AHCI_EN =BIT (31 ),/* AHCI enabled */ /* HOST_CAP bits */ -HOST_CAP_SXS = (1 <<5 ),/* Supports External SATA */ -HOST_CAP_EMS = (1 <<6 ),/* Enclosure Management support */ -HOST_CAP_CCC = (1 <<7 ),/* Command Completion Coalescing */ -HOST_CAP_PART = (1 <<13 ),/* Partial state capable */ -HOST_CAP_SSC = (1 <<14 ),/* Slumber state capable */ -HOST_CAP_PIO_MULTI = (1 <<15 ),/* PIO multiple DRQ support */ -HOST_CAP_FBS = (1 <<16 ),/* FIS-based switching support */ -HOST_CAP_PMP = (1 <<17 ),/* Port Multiplier support */ -HOST_CAP_ONLY = (1 <<18 ),/* Supports AHCI mode only */ -HOST_CAP_CLO = (1 <<24 ),/* Command List Override support */ -HOST_CAP_LED = (1 <<25 ),/* Supports activity LED */ -HOST_CAP_ALPM = (1 <<26 ),/* Aggressive Link PM support */ -HOST_CAP_SSS = (1 <<27 ),/* Staggered Spin-up */ -HOST_CAP_MPS = (1 <<28 ),/* Mechanical presence switch */ -HOST_CAP_SNTF = (1 <<29 ),/* SNotification register */ -HOST_CAP_NCQ = (1 <<30 ),/* Native Command Queueing */ -HOST_CAP_64 = (1 <<31 ),/* PCI DAC (64-bit DMA) support */ +HOST_CAP_SXS =BIT (5 ),/* Supports External SATA */ +HOST_CAP_EMS =BIT (6 ),/* Enclosure Management support */ +HOST_CAP_CCC =BIT (7 ),/* Command Completion Coalescing */ +HOST_CAP_PART =BIT (13 ),/* Partial state capable */ +HOST_CAP_SSC =BIT (14 ),/* Slumber state capable */ +HOST_CAP_PIO_MULTI =BIT (15 ),/* PIO multiple DRQ support */ +HOST_CAP_FBS =BIT (16 ),/* FIS-based switching support */ +HOST_CAP_PMP =BIT (17 ),/* Port Multiplier support */ +HOST_CAP_ONLY =BIT (18 ),/* Supports AHCI mode only */ +HOST_CAP_CLO =BIT (24 ),/* Command List Override support */ +HOST_CAP_LED =BIT (25 ),/* Supports activity LED */ +HOST_CAP_ALPM =BIT (26 ),/* Aggressive Link PM support */ +HOST_CAP_SSS =BIT (27 ),/* Staggered Spin-up */ +HOST_CAP_MPS =BIT (28 ),/* Mechanical presence switch */ +HOST_CAP_SNTF =BIT (29 ),/* SNotification register */ +HOST_CAP_NCQ =BIT (30 ),/* Native Command Queueing */ +HOST_CAP_64 =BIT (31 ),/* PCI DAC (64-bit DMA) support */ /* HOST_CAP2 bits */ -HOST_CAP2_BOH = (1 <<0 ),/* BIOS/OS handoff supported */ -HOST_CAP2_NVMHCI = (1 <<1 ),/* NVMHCI supported */ -HOST_CAP2_APST = (1 <<2 ),/* Automatic partial to slumber */ -HOST_CAP2_SDS = (1 <<3 ),/* Support device sleep */ -HOST_CAP2_SADM = (1 <<4 ),/* Support aggressive DevSlp */ -HOST_CAP2_DESO = (1 <<5 ),/* DevSlp from slumber only */ +HOST_CAP2_BOH =BIT (0 ),/* BIOS/OS handoff supported */ +HOST_CAP2_NVMHCI =BIT (1 ),/* NVMHCI supported */ +HOST_CAP2_APST =BIT (2 ),/* Automatic partial to slumber */ +HOST_CAP2_SDS =BIT (3 ),/* Support device sleep */ +HOST_CAP2_SADM =BIT (4 ),/* Support aggressive DevSlp */ +HOST_CAP2_DESO =BIT (5 ),/* DevSlp from slumber only */ /* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */
@@ -145,24 +146,25 @@ enum {PORT_DEVSLP =0x44 ,/* device sleep */ /* PORT_IRQ_{STAT,MASK} bits */ -PORT_IRQ_COLD_PRES = (1 <<31 ),/* cold presence detect */ -PORT_IRQ_TF_ERR = (1 <<30 ),/* task file error */ -PORT_IRQ_HBUS_ERR = (1 <<29 ),/* host bus fatal error */ -PORT_IRQ_HBUS_DATA_ERR = (1 <<28 ),/* host bus data error */ -PORT_IRQ_IF_ERR = (1 <<27 ),/* interface fatal error */ -PORT_IRQ_IF_NONFATAL = (1 <<26 ),/* interface non-fatal error */ -PORT_IRQ_OVERFLOW = (1 <<24 ),/* xfer exhausted available S/G */ -PORT_IRQ_BAD_PMP = (1 <<23 ),/* incorrect port multiplier */ - -PORT_IRQ_PHYRDY = (1 <<22 ),/* PhyRdy changed */ -PORT_IRQ_DEV_ILCK = (1 <<7 ),/* device interlock */ -PORT_IRQ_CONNECT = (1 <<6 ),/* port connect change status */ -PORT_IRQ_SG_DONE = (1 <<5 ),/* descriptor processed */ -PORT_IRQ_UNK_FIS = (1 <<4 ),/* unknown FIS rx'd */ -PORT_IRQ_SDB_FIS = (1 <<3 ),/* Set Device Bits FIS rx'd */ -PORT_IRQ_DMAS_FIS = (1 <<2 ),/* DMA Setup FIS rx'd */ -PORT_IRQ_PIOS_FIS = (1 <<1 ),/* PIO Setup FIS rx'd */ -PORT_IRQ_D2H_REG_FIS = (1 <<0 ),/* D2H Register FIS rx'd */ +PORT_IRQ_COLD_PRES =BIT (31 ),/* cold presence detect */ +PORT_IRQ_TF_ERR =BIT (30 ),/* task file error */ +PORT_IRQ_HBUS_ERR =BIT (29 ),/* host bus fatal error */ +PORT_IRQ_HBUS_DATA_ERR =BIT (28 ),/* host bus data error */ +PORT_IRQ_IF_ERR =BIT (27 ),/* interface fatal error */ +PORT_IRQ_IF_NONFATAL =BIT (26 ),/* interface non-fatal error */ +PORT_IRQ_OVERFLOW =BIT (24 ),/* xfer exhausted available S/G */ +PORT_IRQ_BAD_PMP =BIT (23 ),/* incorrect port multiplier */ + +PORT_IRQ_PHYRDY =BIT (22 ),/* PhyRdy changed */ +PORT_IRQ_DEV_ILCK =BIT (7 ),/* device interlock */ +PORT_IRQ_DMPS =BIT (7 ),/* mechanical presence status */ +PORT_IRQ_CONNECT =BIT (6 ),/* port connect change status */ +PORT_IRQ_SG_DONE =BIT (5 ),/* descriptor processed */ +PORT_IRQ_UNK_FIS =BIT (4 ),/* unknown FIS rx'd */ +PORT_IRQ_SDB_FIS =BIT (3 ),/* Set Device Bits FIS rx'd */ +PORT_IRQ_DMAS_FIS =BIT (2 ),/* DMA Setup FIS rx'd */ +PORT_IRQ_PIOS_FIS =BIT (1 ),/* PIO Setup FIS rx'd */ +PORT_IRQ_D2H_REG_FIS =BIT (0 ),/* D2H Register FIS rx'd */ PORT_IRQ_FREEZE =PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR |
@@ -178,34 +180,34 @@ enum {PORT_IRQ_PIOS_FIS |PORT_IRQ_D2H_REG_FIS ,/* PORT_CMD bits */ -PORT_CMD_ASP = (1 <<27 ),/* Aggressive Slumber/Partial */ -PORT_CMD_ALPE = (1 <<26 ),/* Aggressive Link PM enable */ -PORT_CMD_ATAPI = (1 <<24 ),/* Device is ATAPI */ -PORT_CMD_FBSCP = (1 <<22 ),/* FBS Capable Port */ -PORT_CMD_ESP = (1 <<21 ),/* External Sata Port */ -PORT_CMD_HPCP = (1 <<18 ),/* HotPlug Capable Port */ -PORT_CMD_PMP = (1 <<17 ),/* PMP attached */ -PORT_CMD_LIST_ON = (1 <<15 ),/* cmd list DMA engine running */ -PORT_CMD_FIS_ON = (1 <<14 ),/* FIS DMA engine running */ -PORT_CMD_FIS_RX = (1 <<4 ),/* Enable FIS receive DMA engine */ -PORT_CMD_CLO = (1 <<3 ),/* Command list override */ -PORT_CMD_POWER_ON = (1 <<2 ),/* Power up device */ -PORT_CMD_SPIN_UP = (1 <<1 ),/* Spin up device */ -PORT_CMD_START = (1 <<0 ),/* Enable port DMA engine */ - -PORT_CMD_ICC_MASK = (0xf <<28 ),/* i/f ICC state mask */ -PORT_CMD_ICC_ACTIVE = (0x1 <<28 ),/* Put i/f in active state */ -PORT_CMD_ICC_PARTIAL = (0x2 <<28 ),/* Put i/f in partial state */ -PORT_CMD_ICC_SLUMBER = (0x6 <<28 ),/* Put i/f in slumber state */ +PORT_CMD_ASP =BIT (27 ),/* Aggressive Slumber/Partial */ +PORT_CMD_ALPE =BIT (26 ),/* Aggressive Link PM enable */ +PORT_CMD_ATAPI =BIT (24 ),/* Device is ATAPI */ +PORT_CMD_FBSCP =BIT (22 ),/* FBS Capable Port */ +PORT_CMD_ESP =BIT (21 ),/* External Sata Port */ +PORT_CMD_HPCP =BIT (18 ),/* HotPlug Capable Port */ +PORT_CMD_PMP =BIT (17 ),/* PMP attached */ +PORT_CMD_LIST_ON =BIT (15 ),/* cmd list DMA engine running */ +PORT_CMD_FIS_ON =BIT (14 ),/* FIS DMA engine running */ +PORT_CMD_FIS_RX =BIT (4 ),/* Enable FIS receive DMA engine */ +PORT_CMD_CLO =BIT (3 ),/* Command list override */ +PORT_CMD_POWER_ON =BIT (2 ),/* Power up device */ +PORT_CMD_SPIN_UP =BIT (1 ),/* Spin up device */ +PORT_CMD_START =BIT (0 ),/* Enable port DMA engine */ + +PORT_CMD_ICC_MASK = (0xfu <<28 ),/* i/f ICC state mask */ +PORT_CMD_ICC_ACTIVE = (0x1u <<28 ),/* Put i/f in active state */ +PORT_CMD_ICC_PARTIAL = (0x2u <<28 ),/* Put i/f in partial state */ +PORT_CMD_ICC_SLUMBER = (0x6u <<28 ),/* Put i/f in slumber state */ /* PORT_FBS bits */ PORT_FBS_DWE_OFFSET =16 ,/* FBS device with error offset */ PORT_FBS_ADO_OFFSET =12 ,/* FBS active dev optimization offset */ PORT_FBS_DEV_OFFSET =8 ,/* FBS device to issue offset */ PORT_FBS_DEV_MASK = (0xf <<PORT_FBS_DEV_OFFSET ),/* FBS.DEV */ -PORT_FBS_SDE = (1 <<2 ),/* FBS single device error */ -PORT_FBS_DEC = (1 <<1 ),/* FBS device error clear */ -PORT_FBS_EN = (1 <<0 ),/* Enable FBS */ +PORT_FBS_SDE =BIT (2 ),/* FBS single device error */ +PORT_FBS_DEC =BIT (1 ),/* FBS device error clear */ +PORT_FBS_EN =BIT (0 ),/* Enable FBS */ /* PORT_DEVSLP bits */ PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */
@@ -213,44 +215,44 @@ enum {PORT_DEVSLP_DITO_OFFSET =15 ,/* DITO offset */ PORT_DEVSLP_MDAT_OFFSET =10 ,/* Minimum assertion time */ PORT_DEVSLP_DETO_OFFSET =2 ,/* DevSlp exit timeout */ -PORT_DEVSLP_DSP = (1 <<1 ),/* DevSlp present */ -PORT_DEVSLP_ADSE = (1 <<0 ),/* Aggressive DevSlp enable */ +PORT_DEVSLP_DSP =BIT (1 ),/* DevSlp present */ +PORT_DEVSLP_ADSE =BIT (0 ),/* Aggressive DevSlp enable */ /* hpriv->flags bits */ #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) -AHCI_HFLAG_NO_NCQ = (1 <<0 ), -AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 <<1 ),/* ignore IRQ_IF_ERR */ -AHCI_HFLAG_IGN_SERR_INTERNAL = (1 <<2 ),/* ignore SERR_INTERNAL */ -AHCI_HFLAG_32BIT_ONLY = (1 <<3 ),/* force 32bit */ -AHCI_HFLAG_MV_PATA = (1 <<4 ),/* PATA port */ -AHCI_HFLAG_NO_MSI = (1 <<5 ),/* no PCI MSI */ -AHCI_HFLAG_NO_PMP = (1 <<6 ),/* no PMP */ -AHCI_HFLAG_SECT255 = (1 <<8 ),/* max 255 sectors */ -AHCI_HFLAG_YES_NCQ = (1 <<9 ),/* force NCQ cap on */ -AHCI_HFLAG_NO_SUSPEND = (1 <<10 ),/* don't suspend */ -AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 <<11 ),/* treat SRST timeout as -link offline */ -AHCI_HFLAG_NO_SNTF = (1 <<12 ),/* no sntf */ -AHCI_HFLAG_NO_FPDMA_AA = (1 <<13 ),/* no FPDMA AA */ -AHCI_HFLAG_YES_FBS = (1 <<14 ),/* force FBS cap on */ -AHCI_HFLAG_DELAY_ENGINE = (1 <<15 ),/* do not start engine on -port start (wait until -error-handling stage) */ -AHCI_HFLAG_NO_DEVSLP = (1 <<17 ),/* no device sleep */ -AHCI_HFLAG_NO_FBS = (1 <<18 ),/* no FBS */ +AHCI_HFLAG_NO_NCQ =BIT (0 ), +AHCI_HFLAG_IGN_IRQ_IF_ERR =BIT (1 ),/* ignore IRQ_IF_ERR */ +AHCI_HFLAG_IGN_SERR_INTERNAL =BIT (2 ),/* ignore SERR_INTERNAL */ +AHCI_HFLAG_32BIT_ONLY =BIT (3 ),/* force 32bit */ +AHCI_HFLAG_MV_PATA =BIT (4 ),/* PATA port */ +AHCI_HFLAG_NO_MSI =BIT (5 ),/* no PCI MSI */ +AHCI_HFLAG_NO_PMP =BIT (6 ),/* no PMP */ +AHCI_HFLAG_SECT255 =BIT (8 ),/* max 255 sectors */ +AHCI_HFLAG_YES_NCQ =BIT (9 ),/* force NCQ cap on */ +AHCI_HFLAG_NO_SUSPEND =BIT (10 ),/* don't suspend */ +AHCI_HFLAG_SRST_TOUT_IS_OFFLINE =BIT (11 ),/* treat SRST timeout as +link offline */ +AHCI_HFLAG_NO_SNTF =BIT (12 ),/* no sntf */ +AHCI_HFLAG_NO_FPDMA_AA =BIT (13 ),/* no FPDMA AA */ +AHCI_HFLAG_YES_FBS =BIT (14 ),/* force FBS cap on */ +AHCI_HFLAG_DELAY_ENGINE =BIT (15 ),/* do not start engine on +port start (wait until +error-handling stage) */ +AHCI_HFLAG_NO_DEVSLP =BIT (17 ),/* no device sleep */ +AHCI_HFLAG_NO_FBS =BIT (18 ),/* no FBS */ #ifdef CONFIG_PCI_MSI -AHCI_HFLAG_MULTI_MSI = (1 <<20 ),/* per-port MSI(-X) */ +AHCI_HFLAG_MULTI_MSI =BIT (20 ),/* per-port MSI(-X) */ #else/* compile out MSI infrastructure */ AHCI_HFLAG_MULTI_MSI =0 , #endif -AHCI_HFLAG_WAKE_BEFORE_STOP = (1 <<22 ),/* wake before DMA stop */ -AHCI_HFLAG_YES_ALPM = (1 <<23 ),/* force ALPM cap on */ -AHCI_HFLAG_NO_WRITE_TO_RO = (1 <<24 ),/* don't write to read -only registers */ +AHCI_HFLAG_WAKE_BEFORE_STOP =BIT (22 ),/* wake before DMA stop */ +AHCI_HFLAG_YES_ALPM =BIT (23 ),/* force ALPM cap on */ +AHCI_HFLAG_NO_WRITE_TO_RO =BIT (24 ),/* don't write to read +only registers */ /* ap->flags bits */
@@ -264,22 +266,22 @@ enum {EM_MAX_RETRY =5 ,/* em_ctl bits */ -EM_CTL_RST = (1 <<9 ),/* Reset */ -EM_CTL_TM = (1 <<8 ),/* Transmit Message */ -EM_CTL_MR = (1 <<0 ),/* Message Received */ -EM_CTL_ALHD = (1 <<26 ),/* Activity LED */ -EM_CTL_XMT = (1 <<25 ),/* Transmit Only */ -EM_CTL_SMB = (1 <<24 ),/* Single Message Buffer */ -EM_CTL_SGPIO = (1 <<19 ),/* SGPIO messages supported */ -EM_CTL_SES = (1 <<18 ),/* SES-2 messages supported */ -EM_CTL_SAFTE = (1 <<17 ),/* SAF-TE messages supported */ -EM_CTL_LED = (1 <<16 ),/* LED messages supported */ +EM_CTL_RST =BIT (9 ),/* Reset */ +EM_CTL_TM =BIT (8 ),/* Transmit Message */ +EM_CTL_MR =BIT (0 ),/* Message Received */ +EM_CTL_ALHD =BIT (26 ),/* Activity LED */ +EM_CTL_XMT =BIT (25 ),/* Transmit Only */ +EM_CTL_SMB =BIT (24 ),/* Single Message Buffer */ +EM_CTL_SGPIO =BIT (19 ),/* SGPIO messages supported */ +EM_CTL_SES =BIT (18 ),/* SES-2 messages supported */ +EM_CTL_SAFTE =BIT (17 ),/* SAF-TE messages supported */ +EM_CTL_LED =BIT (16 ),/* LED messages supported */ /* em message type */ -EM_MSG_TYPE_LED = (1 <<0 ),/* LED */ -EM_MSG_TYPE_SAFTE = (1 <<1 ),/* SAF-TE */ -EM_MSG_TYPE_SES2 = (1 <<2 ),/* SES-2 */ - EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */ +EM_MSG_TYPE_LED =BIT (0 ),/* LED */ +EM_MSG_TYPE_SAFTE =BIT (1 ),/* SAF-TE */ +EM_MSG_TYPE_SES2 =BIT (2 ),/* SES-2 */ + EM_MSG_TYPE_SGPIO = BIT(3), /* SGPIO */ }; struct ahci_cmd_hdr {
Greg Kroah-Hartman
maintainerPATCH 41/48 remove the sx8 block driver
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit d13bc4d84a8e91060d3797fc95c1a0202bfd1499 upstream.
This driver is for fairly obscure hardware, and has only seen random drive-by changes after the maintainer stopped working on it in 2005 (about a year and a half after it was introduced). It has some "interesting" block layer interactions, so let's just drop it unless anyone complains.
--- drivers/block/Kconfig | 9 drivers/block/Makefile | 2 drivers/block/sx8.c | 1746 ------------------------------------------------- 3 files changed, 1757 deletions(-) delete mode 100644 drivers/block/sx8.c
drivers/block/Kconfig +0 -9
@@ -303,15 +303,6 @@ config BLK_DEV_SKD Use device /dev/skd$N amd /dev/skd$Np$M. -config BLK_DEV_SX8 - tristate "Promise SATA SX8 support" - depends on PCI - ---help--- - Saying Y or M here will enable support for the - Promise SATA SX8 controllers. - - Use devices /dev/sx8/$N and /dev/sx8/$Np$M. - config BLK_DEV_RAM tristate "RAM block device support" select DAX if BLK_DEV_RAM_DAX
drivers/block/Makefile +0 -2
@@ -27,8 +27,6 @@ obj-$(CONFIG_BLK_DEV_NBD) += nbd.o obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o -obj-$(CONFIG_BLK_DEV_SX8) += sx8.o - obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o obj-$(CONFIG_XEN_BLKDEV_BACKEND) += xen-blkback/ obj-$(CONFIG_BLK_DEV_DRBD) += drbd/
drivers/block/sx8.c deleted +0 -1746
1,746 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 42/48 vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: George Kennedy <[email protected]>
commit 226fae124b2dac217ea5436060d623ff3385bc34 upstream.
After a call to console_unlock() in vcs_read() the vc_data struct can be freed by vc_deallocate(). Because of that, the struct vc_data pointer load must be done at the top of while loop in vcs_read() to avoid a UAF when vcs_size() is called.
Syzkaller reported a UAF in vcs_size().
BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537 CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module Call Trace: <TASK>
__asan_report_load4_noabort (mm/kasan/report_generic.c:350) vcs_size (drivers/tty/vt/vc_screen.c:215)vcs_read (drivers/tty/vt/vc_screen.c:415)vfs_read (fs/read_write.c:468 fs/read_write.c:450)
...
</TASK>
Allocated by task 1191:
...
kmalloc_trace (mm/slab_common.c:1069)
vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720
drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108)
con_install (drivers/tty/vt/vt.c:3383)
tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413
drivers/tty/tty_io.c:1390)
tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126)chrdev_open (fs/char_dev.c:415)do_dentry_open (fs/open.c:883)vfs_open (fs/open.c:1014)
...
Freed by task 1548:
...
kfree (mm/slab_common.c:1021)vc_port_destruct (drivers/tty/vt/vt.c:1094) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)tty_ioctl (drivers/tty/tty_io.c:2776)
...
The buggy address belongs to the object at ffff888113747800 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
1024-byte region [ffff888113747800, ffff888113747c00)
The buggy address belongs to the physical page:
page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x113740
head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0
compound_pincount:0
anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fbQuoted 1 line
ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
--- drivers/tty/vt/vc_screen.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/tty/vt/vc_screen.c +5 -4
@@ -219,10 +219,6 @@ vcs_read(struct file *file, char __userconsole_lock (); attr = (currcons &128 ); - ret = -ENXIO ; - vc =vcs_vc (inode, &viewed); -if (!vc) - goto unlock_out; ret = -EINVAL ;if (pos <0 )
@@ -238,6 +234,11 @@ vcs_read(struct file *file, char __userssize_t orig_count;long p = pos; + ret = -ENXIO ; + vc =vcs_vc (inode, &viewed); +if (!vc) + goto unlock_out; +/* Check whether we are above size each round, * as copy_to_user at the end of this loop * could sleep.
Greg Kroah-Hartman
maintainerPATCH 43/48 PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vicki Pfau <[email protected]>
commit 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream.
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be operated as either a USB Host or a USB Device, similar to on the AMD Nolan platform.
be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device") added a quirk to let the dwc3 driver claim the Nolan device since it provides more specific support.
Extend that quirk to include the VanGogh SoC USB3 device.
--- drivers/pci/quirks.c | 9 ++++++--- include/linux/pci_ids.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/pci/quirks.c +6 -3
@@ -429,14 +429,15 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT/* * In the AMD NL platform, this device ([1022:7912]) has a class code of * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will -* claim it. +* claim it. The same applies on the VanGogh platform device ([1022:163a]). +* * But the dwc3 driver is a more specific driver for this device, and we'd * prefer to use it instead of xhci. To prevent xhci from claiming the * device, change the class code to 0x0c03fe, which the PCI r3.0 spec * defines as "USB device (not host controller)". The dwc3 driver can then * claim it based on its Vendor and Device ID. */ -static void quirk_amd_nl_class (struct pci_dev *pdev) +static void quirk_amd_dwc_class (struct pci_dev *pdev) {u32 class = pdev->class;
@@ -446,7 +447,9 @@ static void quirk_amd_nl_class(struct pc class, pdev->class); }DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_NL_USB , - quirk_amd_nl_class); + quirk_amd_dwc_class); +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_AMD ,PCI_DEVICE_ID_AMD_VANGOGH_USB , + quirk_amd_dwc_class);/* * Let's make the southbridge information explicit instead
include/linux/pci_ids.h +1 -0
@@ -541,6 +541,7 @@#define PCI_DEVICE_ID_AMD_16H_NB_F4 0x1534#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F3 0x1583#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F4 0x1584 +#define PCI_DEVICE_ID_AMD_VANGOGH_USB 0x163a#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703#define PCI_DEVICE_ID_AMD_LANCE 0x2000#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
Greg Kroah-Hartman
maintainerPATCH 44/48 usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: LihaSika <[email protected]>
commit 0e3139e6543b241b3e65956a55c712333bef48ac upstream.
Change lower bcdDevice value for "Super Top USB 2.0 SATA BRIDGE" to match 1.50. I have such an older device with bcdDevice=1.50 and it will not work otherwise.
--- drivers/usb/storage/unusual_cypress.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/storage/unusual_cypress.h +1 -1
@@ -32,7 +32,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), -UNUSUAL_DEV (0x14cd ,0x6116 ,0x0160 ,0x0160 , +UNUSUAL_DEV (0x14cd ,0x6116 ,0x0150 ,0x0160 ,"Super Top" ,"USB 2.0 SATA BRIDGE" , USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
Greg Kroah-Hartman
maintainerPATCH 45/48 tty: 8250: Remove UC-257 and UC-431
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cameron Williams <[email protected]>
commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.
The UC-257 is a serial + LPT card, so remove it from this driver. A patch has been submitted to add it to parport_serial instead.
Additionaly, the UC-431 does not use this card ID, only the UC-420 does. The 431 is a 3-port card and there is no generic 3-port configuration available, so remove reference to it from this driver.
--- drivers/tty/serial/8250/8250_pci.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-)
drivers/tty/serial/8250/8250_pci.c +1 -8
@@ -4810,13 +4810,6 @@ static const struct pci_device_id serial0 ,0 , pbn_b2_1_115200 },/* -* Brainboxes UC-257 -*/ - { PCI_VENDOR_ID_INTASHIELD, 0x0861, -PCI_ANY_ID ,PCI_ANY_ID , -0 ,0 , - pbn_b2_2_115200 }, -/* * Brainboxes UC-260/271/701/756 */ { PCI_VENDOR_ID_INTASHIELD, 0x0D21,
@@ -4895,7 +4888,7 @@ static const struct pci_device_id serial0 ,0 , pbn_b2_4_115200 },/* -* Brainboxes UC-420/431 +* Brainboxes UC-420 */ { PCI_VENDOR_ID_INTASHIELD, 0x0921, PCI_ANY_ID, PCI_ANY_ID,
Greg Kroah-Hartman
maintainerPATCH 46/48 tty: 8250: Add support for additional Brainboxes UC cards
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cameron Williams <[email protected]>
commit c563db486db7d245c0e2f319443417ae8e692f7f upstream.
Add device IDs for some more Brainboxes UC cards, namely UC-235/UC-246, UC-253/UC-734, UC-302, UC-313, UC-346, UC-357, UC-607 and UC-836.
--- drivers/tty/serial/8250/8250_pci.c | 57 +++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
drivers/tty/serial/8250/8250_pci.c +57 -0
@@ -4809,6 +4809,17 @@ static const struct pci_device_id serialPCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , pbn_b2_1_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AA2, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_1_115200 }, +/* +* Brainboxes UC-253/UC-734 +*/ + { PCI_VENDOR_ID_INTASHIELD, 0x0CA1, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 },/* * Brainboxes UC-260/271/701/756 */
@@ -4841,6 +4852,14 @@ static const struct pci_device_id serialPCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E2, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E3, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 },/* * Brainboxes UC-310 */
@@ -4851,6 +4870,14 @@ static const struct pci_device_id serial/* * Brainboxes UC-313 */ + {PCI_VENDOR_ID_INTASHIELD ,0x08A1 , +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08A2, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x08A3,PCI_ANY_ID ,PCI_ANY_ID , 0, 0,
@@ -4865,6 +4892,10 @@ static const struct pci_device_id serial/* * Brainboxes UC-346 */ + {PCI_VENDOR_ID_INTASHIELD ,0x0B01 , +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_4_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x0B02,PCI_ANY_ID ,PCI_ANY_ID , 0, 0,
@@ -4876,6 +4907,10 @@ static const struct pci_device_id serialPCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0A82, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x0A83,PCI_ANY_ID ,PCI_ANY_ID , 0, 0,
@@ -4894,6 +4929,28 @@ static const struct pci_device_id serialPCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , pbn_b2_4_115200 }, +/* +* Brainboxes UC-607 +*/ + { PCI_VENDOR_ID_INTASHIELD, 0x09A1, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A2, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A3, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, +/* +* Brainboxes UC-836 +*/ + { PCI_VENDOR_ID_INTASHIELD, 0x0D41, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_4_115200 },/* * Perle PCI-RAS cards */
Greg Kroah-Hartman
maintainerPATCH 47/48 tty: 8250: Add support for Brainboxes UP cards
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cameron Williams <[email protected]>
commit 2c6fec1e1532f15350be7e14ba6b88a39d289fe4 upstream.
Add support for the Brainboxes UP (powered PCI) range of cards, namely UP-189, UP-200, UP-869 and UP-880.
--- drivers/tty/serial/8250/8250_pci.c | 60 +++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)
drivers/tty/serial/8250/8250_pci.c +60 -0
@@ -4952,6 +4952,66 @@ static const struct pci_device_id serial0 ,0 , pbn_b2_4_115200 },/* +* Brainboxes UP-189 +*/ + { PCI_VENDOR_ID_INTASHIELD, 0x0AC1, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC2, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC3, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, +/* +* Brainboxes UP-200 +*/ + { PCI_VENDOR_ID_INTASHIELD, 0x0B21, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B22, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B23, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, +/* +* Brainboxes UP-869 +*/ + { PCI_VENDOR_ID_INTASHIELD, 0x0C01, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C02, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C03, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, +/* +* Brainboxes UP-880 +*/ + { PCI_VENDOR_ID_INTASHIELD, 0x0C21, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C22, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C23, +PCI_ANY_ID ,PCI_ANY_ID , +0 ,0 , + pbn_b2_2_115200 }, +/* * Perle PCI-RAS cards */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
Greg Kroah-Hartman
maintainerPATCH 48/48 tty: 8250: Add support for Intashield IS-100
In reply to Greg Kroah-Hartman4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cameron Williams <[email protected]>
commit 4d994e3cf1b541ff32dfb03fbbc60eea68f9645b upstream.
Add support for the Intashield IS-100 1 port serial card.
--- drivers/tty/serial/8250/8250_pci.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/tty/serial/8250/8250_pci.c +6 -0
@@ -4783,6 +4783,12 @@ static const struct pci_device_id serial pbn_b1_bt_1_115200 },/* +* IntaShield IS-100 +*/ + {PCI_VENDOR_ID_INTASHIELD ,0x0D60 , +PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , + pbn_b2_1_115200 }, +/* * IntaShield IS-200 */ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
Hi!
Quoted 4 lines
This is the start of the stable review cycle for the 4.14.329 release. There are 48 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.14.y
Best regards,
Pavel
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.329 release. There are 48 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.329-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.14.y
and the diffstat can be found below.thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v4.14:
10 builds: 10 pass, 0 fail
16 boots: 16 pass, 0 fail
32 tests: 32 pass, 0 failLinux version: 4.14.329-rc1-g081def1ede2f
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Jon
Hi Greg,
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.329 release. There are 48 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000. Anything received after that time might be too late.
No problems seen on x86_64 and aarch64 with our testing.
Thanks,
Harshit
Quoted 10 lines
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.329-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.14.y
and the diffstat can be found below.thanks,
greg k-h
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.329 release. There are 48 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000. Anything received after that time might be too late.
Build results:
total: 139 pass: 139 fail: 0 Qemu test results: total: 440 pass: 440 fail: 0
Guenter
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.329 release. There are 48 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 08 Nov 2023 13:02:46 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.329-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.14.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
## Build
* kernel: 4.14.329-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: 081def1ede2f5d00fdf79793a6a9996bf9344737
* git describe: v4.14.328-49-g081def1ede2f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.328-49-g081def1ede2f
## Test Regressions (compared to v4.14.328)
## Metric Regressions (compared to v4.14.328)
## Test Fixes (compared to v4.14.328)
## Metric Fixes (compared to v4.14.328)
## Test result summary
total: 52442, pass: 43805, fail: 1588, skip: 7008, xfail: 41
## Build Summary
* arc: 9 total, 9 passed, 0 failed
* arm: 103 total, 98 passed, 5 failed
* arm64: 33 total, 29 passed, 4 failed
* i386: 21 total, 18 passed, 3 failed
* mips: 19 total, 19 passed, 0 failed
* parisc: 3 total, 0 passed, 3 failed
* powerpc: 8 total, 7 passed, 1 failed
* s390: 6 total, 5 passed, 1 failed
* sh: 9 total, 9 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 27 total, 23 passed, 4 failed
## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-user
* kselftest-vm
* kselftest-zram
* kunit
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-crypto
* ltp-cve
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* rcutorture
--
Linaro LKFT
https://lkft.linaro.org