generic/459: improve shutdown/read-only check to accommodate bcachefs
PATCH v2 1/1 generic/459: improve shutdown/read-only check to accommodate bcachefs
generic/459 occasionally fails on bcachefs because the deliberately induced I/O errors caused by exhausting the overprovisioned thin pool can lead to filesystem shutdown. This test considers this expected behavior on certain fs', but only checks for the ext4 remount read-only behavior. bcachefs does a similar emergency read-only transition in response to certain I/O errors, but it behaves more similar to an XFS shutdown and doesn't necessarily reflect "ro" state in the mount table (unless induced by userspace).
Since the test already runs a touch command to help trigger the ext4 error handling sequence, this can be tweaked to serve double duty and also more accurately detect read-only status on bcachefs. Refactor into a small helper, check for touch command failure, and consider the fs read-only if either that or the mount entry check indicates it.
---
v2:
- Drop error filtering and just check touch failure.
- Comment tweaks.
v1: https://lore.kernel.org/fstests/[email protected]/
tests/generic/459 | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-)
tests/generic/459 +21 -7
@@ -57,6 +57,24 @@ origpsize=200 virtsize=300 newpsize=300 +# Check whether the filesystem has shutdown or remounted read-only. Shutdown +# behavior can differ based on filesystem and configuration. Some fs' may not +# have remounted without an additional write while others may have shutdown but +# do not necessarily reflect read-only state in the mount options. Check both +# here by first trying a simple write and following with an explicit ro check. +is_shutdown_or_ro() +{ + ro=0 + + # if the fs has not shutdown, this may help trigger a remount-ro + touch $SCRATCH_MNT/newfile > /dev/null 2>&1 || ro=1 + + _fs_options /dev/mapper/$vgname-$snapname | grep -w "ro" > /dev/null + [ $? == 0 ] && ro=1 + + echo $ro +} + # Ensure we have enough disk space _scratch_mkfs_sized $((350 * 1024 * 1024)) >>$seqres.full 2>&1
@@ -113,13 +131,9 @@ ret=$? # - The filesystem stays in Read-Write mode, but can be frozen/thawed # without getting stuck. if [ $ret -ne 0 ]; then - # freeze failed, filesystem should reject further writes and remount - # as readonly. Sometimes the previous write process won't trigger - # ro-remount, e.g. on ext3/4, do additional touch here to make sure - # filesystems see the metadata I/O error. - touch $SCRATCH_MNT/newfile >/dev/null 2>&1 - ISRO=$(_fs_options /dev/mapper/$vgname-$snapname | grep -w "ro") - if [ -n "$ISRO" ]; then + # freeze failed, filesystem should reject further writes + ISRO=`is_shutdown_or_ro` + if [ $ISRO == 1 ]; then echo "Test OK" else echo "Freeze failed and FS isn't Read-Only. Test Failed"
Signature · 1 line
2.41.0
Quoted 9 lines · Brian Foster
generic/459 occasionally fails on bcachefs because the deliberately induced I/O errors caused by exhausting the overprovisioned thin pool can lead to filesystem shutdown. This test considers this expected behavior on certain fs', but only checks for the ext4 remount read-only behavior. bcachefs does a similar emergency read-only transition in response to certain I/O errors, but it behaves more similar to an XFS shutdown and doesn't necessarily reflect "ro" state in the mount table (unless induced by userspace).
Quoted 8 lines
Since the test already runs a touch command to help trigger the ext4 error handling sequence, this can be tweaked to serve double duty and also more accurately detect read-only status on bcachefs. Refactor into a small helper, check for touch command failure, and consider the fs read-only if either that or the mount entry check indicates it.
Signed-off-by Brian Foster <[email protected]>
Looks fine.
Quoted 60 lines
---
v2:
- Drop error filtering and just check touch failure.
- Comment tweaks.
v1: https://lore.kernel.org/fstests/[email protected]/tests/generic/459 | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-)tests/generic/459 +21
-7@@ -57,6 +57,24 @@ origpsize=200 virtsize=300 newpsize=300 +# Check whether the filesystem has shutdown or remounted read-only. Shutdown +# behavior can differ based on filesystem and configuration. Some fs' may not +# have remounted without an additional write while others may have shutdown but +# do not necessarily reflect read-only state in the mount options. Check both +# here by first trying a simple write and following with an explicit ro check. +is_shutdown_or_ro() +{ + ro=0 + + # if the fs has not shutdown, this may help trigger a remount-ro + touch $SCRATCH_MNT/newfile > /dev/null 2>&1 || ro=1 + + _fs_options /dev/mapper/$vgname-$snapname | grep -w "ro" > /dev/null + [ $? == 0 ] && ro=1 + + echo $ro +} + # Ensure we have enough disk space _scratch_mkfs_sized $((350 * 1024 * 1024)) >>$seqres.full 2>&1@@ -113,13 +131,9 @@ ret=$? # - The filesystem stays in Read-Write mode, but can be frozen/thawed # without getting stuck. if [ $ret -ne 0 ]; then - # freeze failed, filesystem should reject further writes and remount - # as readonly. Sometimes the previous write process won't trigger - # ro-remount, e.g. on ext3/4, do additional touch here to make sure - # filesystems see the metadata I/O error. - touch $SCRATCH_MNT/newfile >/dev/null 2>&1 - ISRO=$(_fs_options /dev/mapper/$vgname-$snapname | grep -w "ro") - if [ -n "$ISRO" ]; then + # freeze failed, filesystem should reject further writes + ISRO=`is_shutdown_or_ro` + if [ $ISRO == 1 ]; then echo "Test OK" else echo "Freeze failed and FS isn't Read-Only. Test Failed"Signature · 1 line
2.41.0