*** Add support for phyCORE-AM62x ***
Subsystems (2)
v4 cover *** Add support for phyCORE-AM62x ***
v4:
- Rebase on current next
- Drop schema file overrides from binman
v3: https://lists.denx.de/pipermail/u-boot/2023-December/539779.html
v2: https://lists.denx.de/pipermail/u-boot/2023-November/538971.html
v1: https://lists.denx.de/pipermail/u-boot/2023-October/535750.html
Wadim Egorov (2):
board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
doc: board: phytec: Add phyCORE-AM62x
arch/arm/dts/Makefile | 4 +- .../arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi | 2190 +++++++++++++++++ arch/arm/dts/k3-am62-phycore-som.dtsi | 324 +++ .../k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 166 ++ arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 266 ++ arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 314 +++ arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts | 119 + arch/arm/mach-k3/am62x/Kconfig | 17 + board/phytec/phycore_am62x/Kconfig | 33 + board/phytec/phycore_am62x/MAINTAINERS | 15 + board/phytec/phycore_am62x/Makefile | 8 + board/phytec/phycore_am62x/board-cfg.yaml | 36 + board/phytec/phycore_am62x/phycore-am62x.c | 59 + board/phytec/phycore_am62x/phycore_am62x.env | 23 + board/phytec/phycore_am62x/pm-cfg.yaml | 12 + board/phytec/phycore_am62x/rm-cfg.yaml | 1088 ++++++++ board/phytec/phycore_am62x/sec-cfg.yaml | 379 +++ configs/phycore_am62x_a53_defconfig | 115 + configs/phycore_am62x_r5_defconfig | 130 + doc/board/phytec/index.rst | 1 + doc/board/phytec/phycore-am62x.rst | 158 ++ doc/board/ti/k3.rst | 1 + include/configs/phycore_am62x.h | 15 + 23 files changed, 5472 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi create mode 100644 arch/arm/dts/k3-am62-phycore-som.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts create mode 100644 arch/arm/dts/k3-am625-phycore-som-binman.dtsi create mode 100644 arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts create mode 100644 board/phytec/phycore_am62x/Kconfig create mode 100644 board/phytec/phycore_am62x/MAINTAINERS create mode 100644 board/phytec/phycore_am62x/Makefile create mode 100644 board/phytec/phycore_am62x/board-cfg.yaml create mode 100644 board/phytec/phycore_am62x/phycore-am62x.c create mode 100644 board/phytec/phycore_am62x/phycore_am62x.env create mode 100644 board/phytec/phycore_am62x/pm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/rm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/sec-cfg.yaml create mode 100644 configs/phycore_am62x_a53_defconfig create mode 100644 configs/phycore_am62x_r5_defconfig create mode 100644 doc/board/phytec/phycore-am62x.rst create mode 100644 include/configs/phycore_am62x.h
Signature · 1 line
2.34.1
PATCH v4 1/2 board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
Add basic support for PHYTEC phyCORE-AM62x SoM.
Supported features:
- 2GB DDR4 RAM
- eMMC Flash
- OSPI NOR Flash
- external uSD
- Ethernet
- debug UART
Product page SoM: https://www.phytec.com/product/phycore-am62x
Device trees were taken from Linux v6.7-rc3.
---
v4:
- Rebase on current next
- Drop schema file overrides from binman
---
arch/arm/dts/Makefile | 4 +- .../arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi | 2190 +++++++++++++++++ arch/arm/dts/k3-am62-phycore-som.dtsi | 324 +++ .../k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 166 ++ arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 266 ++ arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 314 +++ arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts | 119 + arch/arm/mach-k3/am62x/Kconfig | 17 + board/phytec/phycore_am62x/Kconfig | 33 + board/phytec/phycore_am62x/MAINTAINERS | 15 + board/phytec/phycore_am62x/Makefile | 8 + board/phytec/phycore_am62x/board-cfg.yaml | 36 + board/phytec/phycore_am62x/phycore-am62x.c | 59 + board/phytec/phycore_am62x/phycore_am62x.env | 23 + board/phytec/phycore_am62x/pm-cfg.yaml | 12 + board/phytec/phycore_am62x/rm-cfg.yaml | 1088 ++++++++ board/phytec/phycore_am62x/sec-cfg.yaml | 379 +++ configs/phycore_am62x_a53_defconfig | 115 + configs/phycore_am62x_r5_defconfig | 130 + include/configs/phycore_am62x.h | 15 + 20 files changed, 5312 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi create mode 100644 arch/arm/dts/k3-am62-phycore-som.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts create mode 100644 arch/arm/dts/k3-am625-phycore-som-binman.dtsi create mode 100644 arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts create mode 100644 board/phytec/phycore_am62x/Kconfig create mode 100644 board/phytec/phycore_am62x/MAINTAINERS create mode 100644 board/phytec/phycore_am62x/Makefile create mode 100644 board/phytec/phycore_am62x/board-cfg.yaml create mode 100644 board/phytec/phycore_am62x/phycore-am62x.c create mode 100644 board/phytec/phycore_am62x/phycore_am62x.env create mode 100644 board/phytec/phycore_am62x/pm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/rm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/sec-cfg.yaml create mode 100644 configs/phycore_am62x_a53_defconfig create mode 100644 configs/phycore_am62x_r5_defconfig create mode 100644 include/configs/phycore_am62x.h
arch/arm/dts/Makefile +3 -1
@@ -1420,7 +1420,9 @@ dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \ k3-am625-beagleplay.dtb \ k3-am625-r5-beagleplay.dtb \ k3-am625-verdin-wifi-dev.dtb \ - k3-am625-verdin-r5.dtb + k3-am625-verdin-r5.dtb \ + k3-am625-phyboard-lyra-rdk.dtb \ + k3-am625-r5-phycore-som-2gb.dtb dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-sk.dtb \ k3-am62a7-r5-sk.dtb
arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi new file +2190 -0
2,190 lines not on this page · raw message
arch/arm/dts/k3-am62-phycore-som.dtsi new file +324 -0
324 lines not on this page · raw message
arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi new file +166 -0
166 lines not on this page · raw message
arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts new file +266 -0
266 lines not on this page · raw message
arch/arm/dts/k3-am625-phycore-som-binman.dtsi new file +314 -0
44 lines not on this page · raw message
arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts new file +119 -0
119 lines not on this page · raw message
board/phytec/phycore_am62x/Kconfig new file +33 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/MAINTAINERS new file +15 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/Makefile new file +8 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/board-cfg.yaml new file +36 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/phycore-am62x.c new file +59 -0
59 lines not on this page · raw message
board/phytec/phycore_am62x/phycore_am62x.env new file +23 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/pm-cfg.yaml new file +12 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/rm-cfg.yaml new file +1088 -0
1,088 lines not on this page · raw message
board/phytec/phycore_am62x/sec-cfg.yaml new file +379 -0
379 lines not on this page · raw message
configs/phycore_am62x_a53_defconfig new file +115 -0
115 lines not on this page · raw message
configs/phycore_am62x_r5_defconfig new file +130 -0
130 lines not on this page · raw message
include/configs/phycore_am62x.h new file +15 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
Re: [PATCH v4 1/2] board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
Quoted 10 lines · Wadim Egorov
Add basic support for PHYTEC phyCORE-AM62x SoM.
Supported features:
- 2GB DDR4 RAM
- eMMC Flash
- OSPI NOR Flash
- external uSD
- Ethernet
- debug UART
Quoted 6 lines
Product page SoM: https://www.phytec.com/product/phycore-am62x
Device trees were taken from Linux v6.7-rc3.
Signed-off-by Wadim Egorov <[email protected]>Reviewed-by Dhruva Gole <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
PATCH v4 2/2 doc: board: phytec: Add phyCORE-AM62x
In reply to Wadim EgorovAdd documentation for PHYTEC phyCORE-AM62x SoM.
--- doc/board/phytec/index.rst | 1 + doc/board/phytec/phycore-am62x.rst | 158 +++++++++++++++++++++++++++++ doc/board/ti/k3.rst | 1 + 3 files changed, 160 insertions(+) create mode 100644 doc/board/phytec/phycore-am62x.rst
doc/board/phytec/index.rst +1 -0
@@ -6,5 +6,6 @@ PHYTEC .. toctree:: :maxdepth: 2 + phycore-am62x phycore-imx8mm phycore-imx8mp
doc/board/phytec/phycore-am62x.rst new file +158 -0
158 lines not on this page · raw message
doc/board/ti/k3.rst +1 -0
@@ -33,6 +33,7 @@ K3 Based SoCs am62ax_sk am62x_sk ../beagle/am62x_beagleplay + ../phytec/phycore-am62x ../toradex/verdin-am62 am64x_evm am65x_evm
Signature · 1 line
2.34.1
Re: [PATCH v4 2/2] doc: board: phytec: Add phyCORE-AM62x
Quoted 4 lines · Wadim Egorov
Add documentation for PHYTEC phyCORE-AM62x SoM.
Signed-off-by Wadim Egorov <[email protected]>Reviewed-by Dhruva Gole <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
Hello,
is there something missing in this series for it to be applied?
I would like to add support for a 2nd k3/am64x board based on this. So it would be nice to know if I can do it the same way or should wait for more k3 changes to come in first?
Regards,
Wadim
Am 20.12.23 um 10:18 schrieb Wadim Egorov:
Quoted 56 lines
v4:
- Rebase on current next
- Drop schema file overrides from binmanv3: https://lists.denx.de/pipermail/u-boot/2023-December/539779.html
v2: https://lists.denx.de/pipermail/u-boot/2023-November/538971.html
v1: https://lists.denx.de/pipermail/u-boot/2023-October/535750.htmlWadim Egorov (2):
board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
doc: board: phytec: Add phyCORE-AM62xarch/arm/dts/Makefile | 4 +- .../arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi | 2190 +++++++++++++++++ arch/arm/dts/k3-am62-phycore-som.dtsi | 324 +++ .../k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 166 ++ arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 266 ++ arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 314 +++ arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts | 119 + arch/arm/mach-k3/am62x/Kconfig | 17 + board/phytec/phycore_am62x/Kconfig | 33 + board/phytec/phycore_am62x/MAINTAINERS | 15 + board/phytec/phycore_am62x/Makefile | 8 + board/phytec/phycore_am62x/board-cfg.yaml | 36 + board/phytec/phycore_am62x/phycore-am62x.c | 59 + board/phytec/phycore_am62x/phycore_am62x.env | 23 + board/phytec/phycore_am62x/pm-cfg.yaml | 12 + board/phytec/phycore_am62x/rm-cfg.yaml | 1088 ++++++++ board/phytec/phycore_am62x/sec-cfg.yaml | 379 +++ configs/phycore_am62x_a53_defconfig | 115 + configs/phycore_am62x_r5_defconfig | 130 + doc/board/phytec/index.rst | 1 + doc/board/phytec/phycore-am62x.rst | 158 ++ doc/board/ti/k3.rst | 1 + include/configs/phycore_am62x.h | 15 + 23 files changed, 5472 insertions(+), 1 deletion(-)create mode 100644
arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsicreate mode 100644arch/arm/dts/k3-am62-phycore-som.dtsicreate mode 100644arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsicreate mode 100644arch/arm/dts/k3-am625-phyboard-lyra-rdk.dtscreate mode 100644arch/arm/dts/k3-am625-phycore-som-binman.dtsicreate mode 100644arch/arm/dts/k3-am625-r5-phycore-som-2gb.dtscreate mode 100644 board/phytec/phycore_am62x/Kconfig create mode 100644 board/phytec/phycore_am62x/MAINTAINERS create mode 100644 board/phytec/phycore_am62x/Makefile create mode 100644board/phytec/phycore_am62x/board-cfg.yamlcreate mode 100644board/phytec/phycore_am62x/phycore-am62x.ccreate mode 100644 board/phytec/phycore_am62x/phycore_am62x.env create mode 100644board/phytec/phycore_am62x/pm-cfg.yamlcreate mode 100644board/phytec/phycore_am62x/rm-cfg.yamlcreate mode 100644board/phytec/phycore_am62x/sec-cfg.yamlcreate mode 100644 configs/phycore_am62x_a53_defconfig create mode 100644 configs/phycore_am62x_r5_defconfig create mode 100644doc/board/phytec/phycore-am62x.rstcreate mode 100644include/configs/phycore_am62x.h
Quoted 6 lines · Wadim Egorov
Hello,
is there something missing in this series for it to be applied? I would like to add support for a 2nd k3/am64x board based on this. So it would be nice to know if I can do it the same way or should wait for more k3 changes to come in first?
Yes, sorry, I'll pick this up soon.
Quoted 62 lines
Regards,
WadimAm 20.12.23 um 10:18 schrieb Wadim Egorov:
Quoted 56 lines
v4:
- Rebase on current next
- Drop schema file overrides from binmanv3: https://lists.denx.de/pipermail/u-boot/2023-December/539779.html
v2: https://lists.denx.de/pipermail/u-boot/2023-November/538971.html
v1: https://lists.denx.de/pipermail/u-boot/2023-October/535750.htmlWadim Egorov (2):
board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
doc: board: phytec: Add phyCORE-AM62xarch/arm/dts/Makefile | 4 +- .../arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi | 2190 +++++++++++++++++ arch/arm/dts/k3-am62-phycore-som.dtsi | 324 +++ .../k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 166 ++ arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 266 ++ arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 314 +++ arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts | 119 + arch/arm/mach-k3/am62x/Kconfig | 17 + board/phytec/phycore_am62x/Kconfig | 33 + board/phytec/phycore_am62x/MAINTAINERS | 15 + board/phytec/phycore_am62x/Makefile | 8 + board/phytec/phycore_am62x/board-cfg.yaml | 36 + board/phytec/phycore_am62x/phycore-am62x.c | 59 + board/phytec/phycore_am62x/phycore_am62x.env | 23 + board/phytec/phycore_am62x/pm-cfg.yaml | 12 + board/phytec/phycore_am62x/rm-cfg.yaml | 1088 ++++++++ board/phytec/phycore_am62x/sec-cfg.yaml | 379 +++ configs/phycore_am62x_a53_defconfig | 115 + configs/phycore_am62x_r5_defconfig | 130 + doc/board/phytec/index.rst | 1 + doc/board/phytec/phycore-am62x.rst | 158 ++ doc/board/ti/k3.rst | 1 + include/configs/phycore_am62x.h | 15 + 23 files changed, 5472 insertions(+), 1 deletion(-)create mode 100644
arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsicreate mode 100644arch/arm/dts/k3-am62-phycore-som.dtsicreate mode 100644arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsicreate mode 100644arch/arm/dts/k3-am625-phyboard-lyra-rdk.dtscreate mode 100644arch/arm/dts/k3-am625-phycore-som-binman.dtsicreate mode 100644arch/arm/dts/k3-am625-r5-phycore-som-2gb.dtscreate mode 100644 board/phytec/phycore_am62x/Kconfig create mode 100644 board/phytec/phycore_am62x/MAINTAINERS create mode 100644 board/phytec/phycore_am62x/Makefile create mode 100644board/phytec/phycore_am62x/board-cfg.yamlcreate mode 100644board/phytec/phycore_am62x/phycore-am62x.ccreate mode 100644 board/phytec/phycore_am62x/phycore_am62x.env create mode 100644board/phytec/phycore_am62x/pm-cfg.yamlcreate mode 100644board/phytec/phycore_am62x/rm-cfg.yamlcreate mode 100644board/phytec/phycore_am62x/sec-cfg.yamlcreate mode 100644 configs/phycore_am62x_a53_defconfig create mode 100644 configs/phycore_am62x_r5_defconfig create mode 100644doc/board/phytec/phycore-am62x.rstcreate mode 100644include/configs/phycore_am62x.h
Signature · 1 line
Tom