dt-bindings: trivial-devices: Add qca,spidev
PATCH 2/2 dt-bindings: trivial-devices: Add qca,spidev
Add Qualcomm QCA4024 to trivial devices.
--- Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/trivial-devices.yaml +2 -0
@@ -309,6 +309,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Qualcomm QCA4024 Multi-mode Bluetooth and 802.15.4 SoC + - qca,spidev # Renesas HS3001 Temperature and Relative Humidity Sensors - renesas,hs3001 # Renesas ISL29501 time-of-flight sensor
Signature · 1 line
2.43.0
Quoted 12 lines · Paweł Owoc
Add Qualcomm QCA4024 to trivial devices.
Signed-off-by Paweł Owoc <[email protected]>--- Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/trivial-devices.yaml +0
-0
Documentation/devicetree/bindings/trivial-devices.yaml properties: · line 313
Quoted 5 lines
Documentation/devicetree/bindings/trivial-devices.yaml +2
-0@@ -309,6 +309,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Qualcomm QCA4024 Multi-mode Bluetooth and 802.15.4 SoC + - qca,spidev
There is no such hardware as spidev and you even mentioned it is called QCA4024, not spidev. Please don't use that name but a real name.
Also, I have doubts that Bluetooth is a trivial device. Such devices need supplies, have reset/powerdown GPIOs.
Best regards,
Krzysztof
Quoted 9 lines · Krzysztof Kozlowski
Quoted 7 lines · Paweł Owoc
Add Qualcomm QCA4024 to trivial devices.
Signed-off-by Paweł Owoc <[email protected]>--- Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+)
Quoted 14 lines
Documentation/devicetree/bindings/trivial-devices.yaml properties: · line 313
Quoted 10 lines
Documentation/devicetree/bindings/trivial-devices.yaml +2
-0@@ -309,6 +309,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Qualcomm QCA4024 Multi-mode Bluetooth and 802.15.4 SoC + - qca,spidevThere is no such hardware as spidev and you even mentioned it is called QCA4024, not spidev. Please don't use that name but a real name.
The compatibility will be changed to "qca4024" and a new patch version will be prepared.
Quoted 6 lines
Also, I have doubts that Bluetooth is a trivial device. Such devices need supplies, have reset/powerdown GPIOs.
Best regards,
Krzysztof
Quoted 25 lines · On 06/02/2024 17:11, frut3k7 wrote:
Quoted 9 lines · Krzysztof Kozlowski
Quoted 7 lines · Paweł Owoc
Add Qualcomm QCA4024 to trivial devices.
Signed-off-by Paweł Owoc <[email protected]>--- Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+)Quoted 14 lines
Documentation/devicetree/bindings/trivial-devices.yaml properties: · line 313
Quoted 10 lines
Documentation/devicetree/bindings/trivial-devices.yaml +2
-0@@ -309,6 +309,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Qualcomm QCA4024 Multi-mode Bluetooth and 802.15.4 SoC + - qca,spidevThere is no such hardware as spidev and you even mentioned it is called QCA4024, not spidev. Please don't use that name but a real name.
Quoted 2 lines
The compatibility will be changed to "qca4024" and a new patch version will be prepared.
That would be ok except:
Quoted 3 lines
Quoted 3 lines
Also, I have doubts that Bluetooth is a trivial device. Such devices need supplies, have reset/powerdown GPIOs.
this is not resolved. Bluetooth chips are not trivial devices. This one particular exposes several interfaces to the host, needs a clock and power supply.
Best regards,
Krzysztof
Quoted 33 lines · Krzysztof Kozlowski
Quoted 25 lines · On 06/02/2024 17:11, frut3k7 wrote:
Quoted 9 lines · Krzysztof Kozlowski
Quoted 7 lines · Paweł Owoc
Add Qualcomm QCA4024 to trivial devices.
Signed-off-by Paweł Owoc <[email protected]>--- Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+)Quoted 14 lines
Documentation/devicetree/bindings/trivial-devices.yaml properties: · line 313
Quoted 10 lines
Documentation/devicetree/bindings/trivial-devices.yaml +2
-0@@ -309,6 +309,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Qualcomm QCA4024 Multi-mode Bluetooth and 802.15.4 SoC + - qca,spidevThere is no such hardware as spidev and you even mentioned it is called QCA4024, not spidev. Please don't use that name but a real name.
Quoted 2 lines
The compatibility will be changed to "qca4024" and a new patch version will be prepared.
That would be ok except:
Quoted 1 line
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
Also, I have doubts that Bluetooth is a trivial device. Such devices need supplies, have reset/powerdown GPIOs.
this is not resolved. Bluetooth chips are not trivial devices. This one particular exposes several interfaces to the host, needs a clock and power supply.
Device is used over QUP4 SPI controller inside of IPQ8074:
https://lore.kernel.org/all/[email protected]/
I'm not sure if these pin settings should be upstreamed as they are specific to this platform:
https://github.com/openwrt/openwrt/pull/14051/files#diff-ed3fbf0226fbdc76c9c160f2f2b9e988120df472480b9861abe7a46796558115R81-R111
Quoted 3 lines
Best regards,
Krzysztof
Quoted 27 lines · On 06/02/2024 17:34, frut3k7 wrote:
Quoted 20 lines
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Documentation/devicetree/bindings/trivial-devices.yaml +0
-0@@ -309,6 +309,8 @@ properties:Quoted 9 lines
Documentation/devicetree/bindings/trivial-devices.yaml properties: · line 313
Quoted 5 lines
Documentation/devicetree/bindings/trivial-devices.yaml +2
-0- plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Qualcomm QCA4024 Multi-mode Bluetooth and 802.15.4 SoC + - qca,spidevThere is no such hardware as spidev and you even mentioned it is called QCA4024, not spidev. Please don't use that name but a real name.
Quoted 2 lines
The compatibility will be changed to "qca4024" and a new patch version will be prepared.
That would be ok except:
Quoted 1 line
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
Also, I have doubts that Bluetooth is a trivial device. Such devices need supplies, have reset/powerdown GPIOs.
this is not resolved. Bluetooth chips are not trivial devices. This one particular exposes several interfaces to the host, needs a clock and power supply.
Quoted 5 lines
Device is used over QUP4 SPI controller inside of IPQ8074:
https://lore.kernel.org/all/[email protected]/
I'm not sure if these pin settings should be upstreamed as they are specific to this platform:
https://github.com/openwrt/openwrt/pull/14051/files#diff-ed3fbf0226fbdc76c9c160f2f2b9e988120df472480b9861abe7a46796558115R81-R111
Why do you think qca4024 is specific to this platform? Judging by Qualcomm website: it is not.
Best regards,
Krzysztof
Quoted 29 lines · Krzysztof Kozlowski
Quoted 27 lines · On 06/02/2024 17:34, frut3k7 wrote:
Quoted 27 lines
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Documentation/devicetree/bindings/trivial-devices.yaml +0
-0@@ -309,6 +309,8 @@ properties:Quoted 9 lines
Documentation/devicetree/bindings/trivial-devices.yaml properties: · line 313
Quoted 5 lines
Documentation/devicetree/bindings/trivial-devices.yaml +2
-0- plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Qualcomm QCA4024 Multi-mode Bluetooth and 802.15.4 SoC + - qca,spidevThere is no such hardware as spidev and you even mentioned it is called QCA4024, not spidev. Please don't use that name but a real name.
Quoted 2 lines
The compatibility will be changed to "qca4024" and a new patch version will be prepared.
That would be ok except:
Quoted 3 lines
Quoted 3 lines
Also, I have doubts that Bluetooth is a trivial device. Such devices need supplies, have reset/powerdown GPIOs.
this is not resolved. Bluetooth chips are not trivial devices. This one particular exposes several interfaces to the host, needs a clock and power supply.
Quoted 9 lines
Quoted 5 lines
Device is used over QUP4 SPI controller inside of IPQ8074:
https://lore.kernel.org/all/[email protected]/
I'm not sure if these pin settings should be upstreamed as they are specific to this platform:
https://github.com/openwrt/openwrt/pull/14051/files#diff-ed3fbf0226fbdc76c9c160f2f2b9e988120df472480b9861abe7a46796558115R81-R111Why do you think qca4024 is specific to this platform? Judging by Qualcomm website: it is not.
Unfortunately, I do not have access to the documentation for this SoC. Currently, even after adding support, communication with the SoC is not possible. QAPI (Qualcomm API) support is missing.
Quoted 3 lines
Best regards,
Krzysztof