dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
Subsystems (3)
Fabio Estevam
reviewerPATCH 1/1 dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
From: Fabio Estevam <[email protected]>
The fsl-imx-mmc hardware needs two clocks to operate: ipg and per.
Document these required clocks.
This fixes the following schema warning:
imx27-apf27dev.dtb: mmc@10014000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml#
--- .../devicetree/bindings/mmc/fsl-imx-mmc.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)
Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml +12 -0
@@ -24,6 +24,14 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + interrupts: maxItems: 1
@@ -34,6 +42,8 @@ properties: const: rx-tx required: + - clocks + - clock-names - compatible - reg - interrupts
@@ -46,6 +56,8 @@ examples: compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <11>; + clocks = <&clks 29>, <&clks 60>; + clock-names = "ipg", "per"; dmas = <&dma 7>; dma-names = "rx-tx"; bus-width = <4>;
Signature · 1 line
2.34.1
Quoted 7 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
The fsl-imx-mmc hardware needs two clocks to operate: ipg and per.
Document these required clocks.
This fixes the following schema warning:
Mistake in DT list address, so this won't be tested by automation.
Please resend with correct DT list. In case you already did it: feel free to ignore this email. :)
Best regards,
Krzysztof