arm64: dts: imx8mn-evk: Fix ADV7535 dt-schema warnings
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/3 arm64: dts: imx8mn-evk: Fix ADV7535 dt-schema warnings
From: Fabio Estevam <[email protected]>
Currently, there are several ADV7535 dt-schema warnings.
Fx them the same way as in commit efa97aed071e060 ("arm64: dts:
imx8mm-evk: Fix hdmi@3d node").
As there are two different PMICs used on the imx8mn-evk variants, describe the ADV7535 power supplies in each board devicetree.
--- .../boot/dts/freescale/imx8mn-ddr3l-evk.dts | 10 +++++++ .../boot/dts/freescale/imx8mn-ddr4-evk.dts | 10 +++++++ arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 10 +++++++ arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 27 ++++++++++--------- 4 files changed, 45 insertions(+), 12 deletions(-)
arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts +10 -0
@@ -112,3 +112,13 @@ ldo5: LDO5 { }; }; }; + +&i2c2 { + hdmi@3d { + avdd-supply = <&buck5>; + dvdd-supply = <&buck5>; + pvdd-supply = <&buck5>; + a2vdd-supply = <&buck5>; + v1p2-supply = <&buck5>; + }; +};
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +10 -0
@@ -158,3 +158,13 @@ ldo6_reg: LDO6 { }; }; }; + +&i2c2 { + hdmi@3d { + avdd-supply = <&buck5_reg>; + dvdd-supply = <&buck5_reg>; + pvdd-supply = <&buck5_reg>; + a2vdd-supply = <&buck5_reg>; + v1p2-supply = <&buck5_reg>; + }; +};
arch/arm64/boot/dts/freescale/imx8mn-evk.dts +10 -0
@@ -125,3 +125,13 @@ ldo5: LDO5 { }; }; }; + +&i2c2 { + hdmi@3d { + avdd-supply = <&buck5>; + dvdd-supply = <&buck5>; + pvdd-supply = <&buck5>; + a2vdd-supply = <&buck5>; + v1p2-supply = <&buck5>; + }; +};
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +15 -12
@@ -30,7 +30,7 @@ hdmi-connector { port { hdmi_connector_in: endpoint { - remote-endpoint = <&adv7533_out>; + remote-endpoint = <&adv7535_out>; }; }; };
@@ -52,6 +52,13 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; + reg_vddext_3v3: regulator-vddext-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDEXT_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
@@ -193,15 +200,11 @@ &i2c2 { hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; + v3p3-supply = <®_vddext_3v3>; ports { #address-cells = <1>;
@@ -210,7 +213,7 @@ ports { port@0 { reg = <0>; - adv7533_in: endpoint { + adv7535_in: endpoint { remote-endpoint = <&dsi_out>; }; };
@@ -218,7 +221,7 @@ adv7533_in: endpoint { port@1 { reg = <1>; - adv7533_out: endpoint { + adv7535_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; };
@@ -335,7 +338,7 @@ port@1 { reg = <1>; dsi_out: endpoint { - remote-endpoint = <&adv7533_in>; + remote-endpoint = <&adv7535_in>; data-lanes = <1 2 3 4>; }; };
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 2/3 arm64: dts: imx8mn-evk: Describe the OV5640 supplies
From: Fabio Estevam <[email protected]>
Per ovti,ov5640.yaml, the OV5640 power supplies are mandatory properties.
Describe them to fix dt-schema warnings.
As there are two different PMICs used on the imx8mn-evk variants, describe the OV5640 power supplies in each board devicetree.
--- .../boot/dts/freescale/imx8mn-ddr3l-evk.dts | 6 ++++++ .../arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 6 ++++++ arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 6 ++++++ arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 16 ++++++++++++++++ 4 files changed, 34 insertions(+)
arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts +6 -0
@@ -122,3 +122,9 @@ hdmi@3d { v1p2-supply = <&buck5>; }; }; + +&i2c3 { + camera@3c { + DOVDD-supply = <&buck5>; + }; +};
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +6 -0
@@ -168,3 +168,9 @@ hdmi@3d { v1p2-supply = <&buck5_reg>; }; }; + +&i2c3 { + camera@3c { + DOVDD-supply = <&buck5_reg>; + }; +};
arch/arm64/boot/dts/freescale/imx8mn-evk.dts +6 -0
@@ -135,3 +135,9 @@ hdmi@3d { v1p2-supply = <&buck5>; }; }; + +&i2c3 { + camera@3c { + DOVDD-supply = <&buck5>; + }; +};
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +16 -0
@@ -52,6 +52,20 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_vddext_3v3: regulator-vddext-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDEXT_3V3";
@@ -287,6 +301,8 @@ camera@3c { assigned-clock-rates = <24000000>; powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_1v8>; + DVDD-supply = <®_1v5>; port { ov5640_to_mipi_csi2: endpoint {
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 3/3 imx8mm-evk: Describe the OV5640 supplies
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
Per ovti,ov5640.yaml, the OV5640 power supplies are mandatory properties.
Describe them to fix dt-schema warnings.
As there are two different PMICs used on the imx8mn-evk variants, describe the OV5640 power supplies in each board devicetree.
--- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +17 -0
@@ -72,6 +72,20 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_vddext_3v3: regulator-vddext-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDEXT_3V3";
@@ -441,6 +455,9 @@ camera@3c { assigned-clock-rates = <24000000>; powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&buck5_reg>; + AVDD-supply = <®_1v8>; + DVDD-supply = <®_1v5>; port { ov5640_to_mipi_csi2: endpoint {
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel