Skip to contentSkip to conversation

arm64: dts: Add/fix /memory node unit-addresses

PATCH Applied Rob Herring (Arm) 9 participants 9 messages Apr 30, 2024 – Jul 1, 2024

Subsystems (11)
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 arm64: dts: Add/fix /memory node unit-addresses

'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes.

It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement.

---
SoC maintainers, please take this directly.

arm32 is much worse, but the platforms using ATAG to DT code can't be changed and I don't know which ones those are.

 arch/arm64/boot/dts/actions/s700-cubieboard7.dts       | 2 +-
 arch/arm64/boot/dts/apm/apm-merlin.dts                 | 2 +-
 arch/arm64/boot/dts/apm/apm-mustang.dts                | 2 +-
 arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts    | 2 +-
 arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts    | 2 +-
 arch/arm64/boot/dts/cavium/thunder2-99xx.dts           | 2 +-
 arch/arm64/boot/dts/lg/lg1312-ref.dts                  | 2 +-
 arch/arm64/boot/dts/lg/lg1313-ref.dts                  | 2 +-
 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts    | 2 +-
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts          | 2 +-
 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi             | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi           | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-r88.dts            | 2 +-
 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts              | 2 +-
 15 files changed, 15 insertions(+), 15 deletions(-)
arch/arm64/boot/dts/actions/s700-cubieboard7.dts +1 -1
index 63e375cd9eb4..bd54b5165129 100644
@@ -24,7 +24,7 @@ memory@0 {
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	memory@1,e0000000 {
+	memory@1e0000000 {
 		device_type = "memory";
 		reg = <0x1 0xe0000000 0x0 0x0>;
 	};
arch/arm64/boot/dts/apm/apm-merlin.dts +1 -1
index 2e8069002ec1..6e05cf1a3df6 100644
@@ -15,7 +15,7 @@ / {
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >;
 	};
arch/arm64/boot/dts/apm/apm-mustang.dts +1 -1
index 033e10e12b18..e7644cddf06f 100644
@@ -15,7 +15,7 @@ / {
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
 	};
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +1 -1
index dec5a110f1e8..f43cfe66b6af 100644
@@ -50,7 +50,7 @@ chosen {
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts +1 -1
index 1d314f17bbdd..c50df1d02797 100644
@@ -47,7 +47,7 @@ chosen {
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
 	};
arch/arm64/boot/dts/cavium/thunder2-99xx.dts +1 -1
index d005e1e79c3d..89fc4107a0c4 100644
@@ -14,7 +14,7 @@ / {
 	model = "Cavium ThunderX2 CN99XX";
 	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
 		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */
arch/arm64/boot/dts/lg/lg1312-ref.dts +1 -1
index 260a2c5b19e5..cdd10f138098 100644
@@ -22,7 +22,7 @@ aliases {
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};
arch/arm64/boot/dts/lg/lg1313-ref.dts +1 -1
index e89ae853788a..6ace977ff4cf 100644
@@ -22,7 +22,7 @@ aliases {
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};
arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts +1 -1
index a5ab2bc0f835..eeceb5b292a8 100644
@@ -16,7 +16,7 @@ chosen {
 		stdout-path = &serial0;
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +1 -1
index 9ebb7369256e..2e5b6b2c1f56 100644
@@ -25,7 +25,7 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +1 -1
index 1b8379ba87f9..34e2f80514a3 100644
@@ -16,7 +16,7 @@ chosen {
 		stdout-path = "serial0";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0x20000000>;
 	};
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +1 -1
index b48b98c13705..e5c0dbf794ae 100644
@@ -17,7 +17,7 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +1 -1
index dcee2e28916f..23ae2d9de382 100644
@@ -21,7 +21,7 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
arch/arm64/boot/dts/rockchip/rk3368-r88.dts +1 -1
index b16b7ca02379..7f14206d53c3 100644
@@ -21,7 +21,7 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
arch/arm64/boot/dts/sprd/sp9860g-1h10.dts +1 -1
index 6b95fd94cee3..5724cac87e53 100644
@@ -24,7 +24,7 @@ aliases {
 		spi0 = &adi_bus;
 	};
 
-	memory{
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0 0x60000000>,
 		      <0x1 0x80000000 0 0x60000000>;
Signature · 1 line
2.43.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 12 lines · Rob Herring (Arm)

'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes.

It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement.

---
SoC maintainers, please take this directly.

Quoted 8 lines

arm32 is much worse, but the platforms using ATAG to DT code can't be changed and I don't know which ones those are.

  arch/arm64/boot/dts/actions/s700-cubieboard7.dts       | 2 +-
  arch/arm64/boot/dts/apm/apm-merlin.dts                 | 2 +-
  arch/arm64/boot/dts/apm/apm-mustang.dts                | 2 +-
  arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts    | 2 +-
  arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts    | 2 +-

For the above two:

Signature · 1 line
Florian
maintainer Reviewed-by on v1 1/1
#2 lore raw
In reply to Rob Herring (Arm)

Am Dienstag, 30. April 2024, 21:18:54 CEST schrieb Rob Herring (Arm):

Quoted 8 lines

'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes.

It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement.

Quoted 6 lines

---

 arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi           | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
 arch/arm64/boot/dts/rockchip/rk3368-r88.dts            | 2 +-

For the Rockchip boards

Other rk3368-based boards like the Geekbox and PX5-evb already use the correct memory@0 node names, so it looks like the the bootloaders used on rk3368 don't have special requirements for the node-naming.

Reviewed-by on v1 1/1
#3 lore raw
In reply to Rob Herring (Arm)

arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi chosen { · line 22

Quoted 10 lines · Rob Herring (Arm)

+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi

arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +1 -1
@@ -16,7 +16,7 @@ chosen {
  		stdout-path = "serial0";
  	};
 
-	memory {
+	memory@40000000 {
  		device_type = "memory";
  		reg = <0x0 0x40000000 0x0 0x20000000>;
  	};
maintainer Reviewed-by on v1 1/1
#4 lore raw
In reply to Rob Herring (Arm)
Quoted 10 lines · Rob Herring (Arm)

'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes.

It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement.

  arch/arm64/boot/dts/lg/lg1312-ref.dts                  | 2 +-
  arch/arm64/boot/dts/lg/lg1313-ref.dts                  | 2 +-

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Reviewed-by on v1 1/1
#5 lore raw
In reply to Rob Herring (Arm)
Quoted 11 lines · Rob Herring (Arm)

'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes.

It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement.

---
SoC maintainers, please take this directly.

Best regards,
Krzysztof

#6 lore raw
In reply to Rob Herring (Arm)
This patch was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:

Hello:

This patch was applied to soc/soc.git (for-next)
by Arnd Bergmann <[email protected]>:

Quoted 9 lines · On Tue, 30 Apr 2024 14:18:54 -0500 you wrote:

'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes.

It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement.

[...]

Here is the summary with links:
- arm64: dts: Add/fix /memory node unit-addresses

    https://git.kernel.org/soc/soc/c/5c04a5b065e9

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
#7 lore raw
In reply to Rob Herring (Arm)

On Tue, Apr 30, 2024 at 02:18:54PM GMT, Rob Herring (Arm) wrote:
[...]

arch/arm64/boot/dts/nvidia/tegra210-smaug.dts chosen { · line 31

Quoted 13 lines
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +1 -1
index 9ebb7369256e..2e5b6b2c1f56 100644
@@ -25,7 +25,7 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};

[trimming the recipient list and adding Diogo]

Sorry I just noticed this as I was doing a cleanup path of patchwork.

For tegra210-smaug, unfortunately we can't do this. The problem is that the firmware for this device looks for a hard-coded /memory device when updating with the proper memory size and this firmware can't always be updated.

Diogo, you're one of the few remaining people that I know of that still use this device (with an upstream kernel). Do you have any more details about this? Is there any way the firmware can be safely updated on these devices?

Thierry

#8 lore raw

Hi Thierry,

Quoted 25 lines · Thierry Reding

On Tue, Apr 30, 2024 at 02:18:54PM GMT, Rob Herring (Arm) wrote:
[...]

arch/arm64/boot/dts/nvidia/tegra210-smaug.dts chosen { · line 31

Quoted 13 lines
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +1 -1
index 9ebb7369256e..2e5b6b2c1f56 100644
@@ -25,7 +25,7 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};

[trimming the recipient list and adding Diogo]

Sorry I just noticed this as I was doing a cleanup path of patchwork.

For tegra210-smaug, unfortunately we can't do this. The problem is that the firmware for this device looks for a hard-coded /memory device when updating with the proper memory size and this firmware can't always be updated.

Quoted 4 lines

Diogo, you're one of the few remaining people that I know of that still use this device (with an upstream kernel). Do you have any more details about this? Is there any way the firmware can be safely updated on these devices?

To be honest I am not quite sure. I do know that at least there is a part of the firmware that is locked down and cannot be updated easily, as you have to disconnect a ribbon cable inside of the device. Do you know of any firmware updates for this device? Currently I am not aware of any.

Diogo