Skip to contentSkip to conversation

Add PCIe overlay for am642-phyboard-electra

PATCH Superseded Nathan Morrisson 1 participant 3 messages May 7, 2024

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add PCIe overlay for am642-phyboard-electra

Remove PCIe pinmuxing from the am642-phyboard-electra device tree and provide an overlay to mux and enable PCIe.

v2:
- Fix double space typo
- Remove redundant status = okay

Nathan Morrisson (2):
arm64: dts: ti: am642-phyboard-electra: Remove PCIe pinmuxing
arm64: dts: ti: am642-phyboard-electra: Add overlay to enable PCIe

 arch/arm64/boot/dts/ti/Makefile               |  3 +
 .../k3-am642-phyboard-electra-pcie-usb2.dtso  | 87 +++++++++++++++++++
 .../dts/ti/k3-am642-phyboard-electra-rdk.dts  | 12 ---
 3 files changed, 90 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 1/2 arm64: dts: ti: am642-phyboard-electra: Remove PCIe pinmuxing

Remove pinmuxing for PCIe so that we can add it in an overlay.

---
v2: No change

 .../boot/dts/ti/k3-am642-phyboard-electra-rdk.dts    | 12 ------------
 1 file changed, 12 deletions(-)
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +0 -12
index 8237b8c815b8..58cee0a8412c 100644
@@ -190,18 +190,6 @@ AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0)	/* (E19) USB0_DRVVBUS */
 		>;
 	};
 
-	pcie_usb_sel_pins_default: pcie-usb-sel-default-pins {
-		pinctrl-single,pins = <
-			AM64X_IOPAD(0x017c, PIN_OUTPUT, 7)	/* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
-		>;
-	};
-
-	pcie0_pins_default: pcie0-default-pins {
-		pinctrl-single,pins = <
-			AM64X_IOPAD(0x0098, PIN_OUTPUT, 7)	/* (W19) GPMC0_WAIT0.GPIO0_37 */
-		>;
-	};
-
 	user_leds_pins_default: user-leds-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x003c, PIN_OUTPUT, 7)	/* (T20) GPMC0_AD0.GPIO0_15 */
Signature · 1 line
2.25.1
#2 lore raw

PATCH v2 2/2 arm64: dts: ti: am642-phyboard-electra: Add overlay to enable PCIe

In reply to Nathan Morrisson

Add an overlay to enable PCIe on the am642-phyboard-electra. This will disable USB3 and restrict us to USB2.

---
v2:
- Fix double space typo
- Remove redundant status = okay

 arch/arm64/boot/dts/ti/Makefile               |  3 +
 .../k3-am642-phyboard-electra-pcie-usb2.dtso  | 87 +++++++++++++++++++
 2 files changed, 90 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso
arch/arm64/boot/dts/ti/Makefile +3 -0
index 9a722c2473fb..6a38ce2603af 100644
@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-pcie.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-usb3.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-pcie-usb2.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
@@ -131,6 +132,8 @@ k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am642-evm-icssg1-dualemac-dtbs := \
 	k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
+k3-am642-phyboard-electra-pcie-usb2.dtbs := \
+	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-pcie-usb2.dtbo
 k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
 k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso new file +87 -0

87 lines not on this page · raw message

Signature · 1 line
2.25.1