rockchip: puma-rk3399: increase Ethernet PHY timeout to 30s
PATCH v2 1/1 rockchip: puma-rk3399: increase Ethernet PHY timeout to 30s
From: Quentin Schulz <[email protected]>
On Puma v2.1 with a KSZ9031, the Ethernet PHY often doesn't detect the link in the 4-second default timeout.
After some boot-loop test for about a thousand boots, 70% were below 10s, 90% below 15s and 100% below 30s. Let's play it safe and make it 30s so that hopefully all links that should be detected are.
---
Changes in v2:
- rebase on next
- use Kconfig symbol instead of constant in include/configs/
- Link to v1: https://lore.kernel.org/r/[email protected]
--- configs/puma-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/puma-rk3399_defconfig +1 -0
@@ -69,6 +69,7 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_ANEG_TIMEOUT=30000 CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_ETH_DESIGNWARE=y
---
base-commit: 01a5d7547ed3a51a8ac5837c31a150f85bc475f8
change-id: 20240619-puma-eth-timeout-41be9c243ed7
Best regards,
Signature · 1 line
Quentin Schulz <[email protected]>
Quoted 10 lines · Quentin Schulz
From: Quentin Schulz <[email protected]>
On Puma v2.1 with a KSZ9031, the Ethernet PHY often doesn't detect the link in the 4-second default timeout.
After some boot-loop test for about a thousand boots, 70% were below 10s, 90% below 15s and 100% below 30s. Let's play it safe and make it 30s so that hopefully all links that should be detected are.
Signed-off-by Quentin Schulz <[email protected]>
Thanks,
- Kever
Quoted 27 lines
---
Changes in v2:
- rebase on next
- useKconfigsymbol instead of constant ininclude/configs/
- Link to v1: https://lore.kernel.org/r/[email protected]--- configs/puma-rk3399_defconfig | 1 + 1 file changed, 1 insertion(+)configs/puma-rk3399_defconfig +1
-1@@ -69,6 +69,7 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_ANEG_TIMEOUT=30000 CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_ETH_DESIGNWARE=y ---base-commit:
01a5d7547ed3a51a8ac5837c31a150f85bc475f8
change-id: 20240619-puma-eth-timeout-41be9c243ed7Best regards,